- This fixes a bug where subregister incompatible with the vregs register
class where used.
- Implement the case where multiple copies are necessary to cover a
given lanemask.
Differential Revision: https://reviews.llvm.org/D30438
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@298025 91177308-0d34-0410-b5e6-96231b3b80d8
I had ajusted the test case before when testing a chain of length 2, and then
reverted it with rL296845 when I switched to 3 triangles. After running
benchmarks and examining generated code at length 2 I forgot to put the test
back.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@298000 91177308-0d34-0410-b5e6-96231b3b80d8
Earlier stages of GlobalISel always use ConstantInt in G_CONSTANT so that's
what we should check for.
This fixes a crash introduced in r297782.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@297968 91177308-0d34-0410-b5e6-96231b3b80d8
Citing http://bugs.llvm.org/show_bug.cgi?id=32288
The DWARF generated by LLVM includes this location:
0x55 0x93 0x04 DW_OP_reg5 DW_OP_piece(4) When GCC's DWARF is simply
0x55 (DW_OP_reg5) without the DW_OP_piece. I believe it's reasonable
to assume the DWARF consumer knows which part of a register
logically holds the value (low bytes, high bytes, how many bytes,
etc) for a primitive value like an integer.
This patch gets rid of the redundant DW_OP_piece when a subregister is
at offset 0. It also adds previously missing subregister masking when
a subregister is followed by another operation.
(This reapplies r297960 with two additional testcase updates).
rdar://problem/31069390
https://reviews.llvm.org/D31010
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@297965 91177308-0d34-0410-b5e6-96231b3b80d8
We can mark functions to always inline early in the opt. Since we do not have
call support this early inlining creates opportunities for inter-procedural
optimizations which would not occur otherwise.
Differential Revision: https://reviews.llvm.org/D31016
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@297958 91177308-0d34-0410-b5e6-96231b3b80d8
Don't scalarize VSELECT->SETCC when operands/results needs to be widened,
or when the type of the SETCC operands are different from those of the VSELECT.
(VSELECT SETCC) and (VSELECT (AND/OR/XOR (SETCC,SETCC))) are handled.
The previous splitting of VSELECT->SETCC in DAGCombiner::visitVSELECT() is
no longer needed and has been removed.
Updated tests:
test/CodeGen/ARM/vuzp.ll
test/CodeGen/NVPTX/f16x2-instructions.ll
test/CodeGen/X86/2011-10-19-widen_vselect.ll
test/CodeGen/X86/2011-10-21-widen-cmp.ll
test/CodeGen/X86/psubus.ll
test/CodeGen/X86/vselect-pcmp.ll
Review: Eli Friedman, Simon Pilgrim
https://reviews.llvm.org/D29489
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@297930 91177308-0d34-0410-b5e6-96231b3b80d8
This produces a 1% speedup on an important internal Google benchmark
(protocol buffers), with no other regressions in google or in the llvm
test-suite. Only 5 targets in the entire llvm test-suite are affected,
and on those 5 targets the size increase is 0.027%
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@297925 91177308-0d34-0410-b5e6-96231b3b80d8
Regression test for a target-independent bug keeps failing in the
Hexagon backend due to what appears an unrelated issue.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@297888 91177308-0d34-0410-b5e6-96231b3b80d8
Currently, we create a G_CONSTANT for every "synthetic" integer
constant operand (for instance, for the G_GEP offset).
Instead, share the G_CONSTANTs we might have created by going through
the ValueToVReg machinery.
When we're emitting synthetic constants, we do need to get Constants from
the context. One could argue that we shouldn't modify the context at
all (for instance, this means that we're going to use a tad more memory
if the constant wasn't used elsewhere), but constants are mostly
harmless. We currently do this for extractvalue and all.
For constant fcmp, this does mean we'll emit an extra COPY, which is not
necessarily more optimal than an extra materialized constant.
But that preserves the current intended design of uniqued G_CONSTANTs,
and the rematerialization problem exists elsewhere and should be
resolved with a single coherent solution.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@297875 91177308-0d34-0410-b5e6-96231b3b80d8
computeKnownBits didn't handle fp_to_fp16 to report
the high bits as 0. ARM maps the generic node to an instruction
that does not modify the high bits of the register, so introduce
a target node where the high bits are known 0.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@297873 91177308-0d34-0410-b5e6-96231b3b80d8
If we got unlucky with register allocation and actual constpool placement, we
could end up producing a tTBB_JT with an index that's already been clobbered.
Technically, we might be able to fix this situation up with a MOV, but I think
the constant islands pass is complex enough without having to deal with more
weird edge-cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@297871 91177308-0d34-0410-b5e6-96231b3b80d8
Now that we preserve the IR layout, we would end up with all the newly
synthesized switch comparison blocks at the end of the function.
Instead, use a hopefully more reasonable layout, with the comparison
blocks immediately following the switch comparison blocks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@297869 91177308-0d34-0410-b5e6-96231b3b80d8
It makes the output function layout more predictable; the layout has
an effect on performance, we don't want it to be at the mercy of the
translator's visitation order and such.
The predictable output is also easier to digest.
getOrCreateBB isn't appropriately named anymore, as it never needs to
create anything. Rename it and extract the MBB creation logic out of it.
A couple tests were sensitive to the order. Update them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@297868 91177308-0d34-0410-b5e6-96231b3b80d8
The test has grown enough to be annoying to navigate.
While there, Remove unnecessary RUNs, and cleanup a couple comments.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@297856 91177308-0d34-0410-b5e6-96231b3b80d8
Using the module ID here is wrong for a couple of reasons:
1) The module ID is not persisted, so we can end up with different
object file contents given the same input file (for example if the same
file is accessed via different paths).
2) With ThinLTO the module ID field may contain the path to a bitcode file,
which is incorrect, as the .file argument is supposed to contain the path to
a source file.
Differential Revision: https://reviews.llvm.org/D30584
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@297853 91177308-0d34-0410-b5e6-96231b3b80d8
Reduced from a mixture of PR32273 and David Green's test cases showing SelectionDAG::ComputeNumSignBits not correctly handling BUILD_VECTOR implicit truncation of inputs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@297847 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds support for recognizing more patterns to match to DEXT and
CINS instructions.
It finds cases where multiple instructions could be replaced with a single
DEXT or CINS instruction.
For example, for the following:
define i64 @dext_and32(i64 zeroext %a) {
entry:
%and = and i64 %a, 4294967295
ret i64 %and
}
instead of generating:
0000000000000088 <dext_and32>:
88: 64010001 daddiu at,zero,1
8c: 0001083c dsll32 at,at,0x0
90: 6421ffff daddiu at,at,-1
94: 03e00008 jr ra
98: 00811024 and v0,a0,at
9c: 00000000 nop
the following gets generated:
0000000000000068 <dext_and32>:
68: 03e00008 jr ra
6c: 7c82f803 dext v0,a0,0x0,0x20
Cases that are covered:
DEXT:
1. and $src, mask where mask > 0xffff
2. zext $src zero extend from i32 to i64
CINS:
1. and (shl $src, pos), mask
2. shl (and $src, mask), pos
3. zext (shl $src, pos) zero extend from i32 to i64
Patch by Violeta Vukobrat.
Differential Revision: https://reviews.llvm.org/D30464
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@297832 91177308-0d34-0410-b5e6-96231b3b80d8
Enable the selection of the 64-bit signed multiply accumulate
instructions which operate on 16-bit operands. These are enabled for
ARMv5TE onwards for ARM and for V6T2 and other DSP enabled Thumb
architectures.
Differential Revision: https://reviews.llvm.org/D30044
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@297809 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: D25742 improved the precision of debug locations for PGO by removing debug locations from common tail when tail-merging. However, if identical insturctions that are merged into a common tail have the same debug locations, there's no need to remove them. This patch creates a merged debug location of identical instructions across SameTails and assign it to the instruction in the common tail, so that the debug locations are maintained if they are same across identical instructions.
Reviewers: aprantl, probinson, MatzeB, rob.lougher
Reviewed By: aprantl
Subscribers: andreadb, llvm-commits
Differential Revision: https://reviews.llvm.org/D30226
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@297805 91177308-0d34-0410-b5e6-96231b3b80d8
On MachO platforms that use subsections-via-symbols dead code stripping will
drop prefix data. Unfortunately there is no great way to convey the relationship
between a function and its prefix data to the linker. We are forced to use a bit
of a hack: we give the prefix data it’s own symbol, and mark the actual function
entry an .alt_entry.
Patch by Moritz Angermann!
Differential Revision: https://reviews.llvm.org/D30770
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@297804 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
<1 x Ty> is not a legal vector type in LLT, we shouldn’t build G_MERGE_VALUES
instruction for them.
Reviewers: qcolombet, aditya_nandakumar, dsanders, t.p.northover, ab, javed.absar
Reviewed By: qcolombet
Subscribers: dberris, rovka, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D30948
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@297792 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Adds a new kind of MachineOperand: MO_Placeholder.
This operand must not appear in the MIR and only exists as a way of
creating an 'uninitialized' operand until a matcher function overwrites it.
Depends on D30046, D29712
Reviewers: t.p.northover, ab, rovka, aditya_nandakumar, javed.absar, qcolombet
Reviewed By: qcolombet
Subscribers: dberris, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D30089
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@297782 91177308-0d34-0410-b5e6-96231b3b80d8
Reduced version of D26357 - based on the discussion on llvm-dev about canonicalization of UMIN/UMAX/SMIN/SMAX as well as ABS I've reduced that patch to just the ABS ISD node (with x86/sse support) to improve basic combines and lowering.
ARM/AArch64, Hexagon, PowerPC and NVPTX all have similar instructions allowing us to make this a generic opcode and move away from the hard coded tablegen patterns which makes it tricky to match more complex patterns.
At the moment this patch doesn't attempt legalization as we only create an ABS node if its legal/custom.
Differential Revision: https://reviews.llvm.org/D29639
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@297780 91177308-0d34-0410-b5e6-96231b3b80d8
Create nodes for smulwb and smulwt and move their selection from
DAGToDAG to DAG combine. smlawb and smlawt can then be selected
using tablegen. Added some helper functions to detect shift patterns
as well as a wrapper around SimplifyDemandBits. Added a couple of
extra tests.
Differential Revision: https://reviews.llvm.org/D30708
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@297716 91177308-0d34-0410-b5e6-96231b3b80d8
Each Calling convention (CC) defines a static list of registers that should be preserved by a callee function. All other registers should be saved by the caller.
Some CCs use additional condition: If the register is used for passing/returning arguments – the caller needs to save it - even if it is part of the Callee Saved Registers (CSR) list.
The current LLVM implementation doesn’t support it. It will save a register if it is part of the static CSR list and will not care if the register is passed/returned by the callee.
The solution is to dynamically allocate the CSR lists (Only for these CCs). The lists will be updated with actual registers that should be saved by the callee.
Since we need the allocated lists to live as long as the function exists, the list should reside inside the Machine Register Info (MRI) which is a property of the Machine Function and managed by it (and has the same life span).
The lists should be saved in the MRI and populated upon LowerCall and LowerFormalArguments.
The patch will also assist to implement future no_caller_saved_regsiters attribute intended for interrupt handler CC.
Differential Revision: https://reviews.llvm.org/D28566
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@297715 91177308-0d34-0410-b5e6-96231b3b80d8
When checking if chain node is foldable, make sure the intermediate nodes have a single use across all results not just the result that was used to reach the chain node.
This recovers a test case that was severely broken by r296476, my making sure we don't create ADD/ADC that loads and stores when there is also a flag dependency.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@297698 91177308-0d34-0410-b5e6-96231b3b80d8
