llvm/test/CodeGen/R600/sext-in-reg.ll

527 lines
19 KiB
LLVM
Raw Normal View History

; RUN: llc -march=r600 -mcpu=SI -verify-machineinstrs < %s | FileCheck -check-prefix=SI -check-prefix=FUNC %s
; RUN: llc -march=r600 -mcpu=cypress -verify-machineinstrs < %s | FileCheck -check-prefix=EG -check-prefix=FUNC %s
declare i32 @llvm.AMDGPU.imax(i32, i32) nounwind readnone
; FUNC-LABEL: {{^}}sext_in_reg_i1_i32:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-05 14:50:53 +00:00
; SI: s_load_dword [[ARG:s[0-9]+]],
; SI: s_bfe_i32 [[SEXTRACT:s[0-9]+]], [[ARG]], 0x10000
; SI: v_mov_b32_e32 [[EXTRACT:v[0-9]+]], [[SEXTRACT]]
; SI: buffer_store_dword [[EXTRACT]],
; EG: MEM_{{.*}} STORE_{{.*}} [[RES:T[0-9]+\.[XYZW]]], [[ADDR:T[0-9]+.[XYZW]]]
; EG: BFE_INT [[RES]], {{.*}}, 0.0, 1
; EG-NEXT: LSHR * [[ADDR]]
define void @sext_in_reg_i1_i32(i32 addrspace(1)* %out, i32 %in) {
%shl = shl i32 %in, 31
%sext = ashr i32 %shl, 31
store i32 %sext, i32 addrspace(1)* %out
ret void
}
; FUNC-LABEL: {{^}}sext_in_reg_i8_to_i32:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-05 14:50:53 +00:00
; SI: s_add_i32 [[VAL:s[0-9]+]],
; SI: s_sext_i32_i8 [[EXTRACT:s[0-9]+]], [[VAL]]
; SI: v_mov_b32_e32 [[VEXTRACT:v[0-9]+]], [[EXTRACT]]
; SI: buffer_store_dword [[VEXTRACT]],
; EG: MEM_{{.*}} STORE_{{.*}} [[RES:T[0-9]+\.[XYZW]]], [[ADDR:T[0-9]+.[XYZW]]]
; EG: ADD_INT
; EG-NEXT: BFE_INT [[RES]], {{.*}}, 0.0, literal
; EG-NEXT: LSHR * [[ADDR]]
define void @sext_in_reg_i8_to_i32(i32 addrspace(1)* %out, i32 %a, i32 %b) nounwind {
%c = add i32 %a, %b ; add to prevent folding into extload
%shl = shl i32 %c, 24
%ashr = ashr i32 %shl, 24
store i32 %ashr, i32 addrspace(1)* %out, align 4
ret void
}
; FUNC-LABEL: {{^}}sext_in_reg_i16_to_i32:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-05 14:50:53 +00:00
; SI: s_add_i32 [[VAL:s[0-9]+]],
; SI: s_sext_i32_i16 [[EXTRACT:s[0-9]+]], [[VAL]]
; SI: v_mov_b32_e32 [[VEXTRACT:v[0-9]+]], [[EXTRACT]]
; SI: buffer_store_dword [[VEXTRACT]],
; EG: MEM_{{.*}} STORE_{{.*}} [[RES:T[0-9]+\.[XYZW]]], [[ADDR:T[0-9]+.[XYZW]]]
; EG: ADD_INT
; EG-NEXT: BFE_INT [[RES]], {{.*}}, 0.0, literal
; EG-NEXT: LSHR * [[ADDR]]
define void @sext_in_reg_i16_to_i32(i32 addrspace(1)* %out, i32 %a, i32 %b) nounwind {
%c = add i32 %a, %b ; add to prevent folding into extload
%shl = shl i32 %c, 16
%ashr = ashr i32 %shl, 16
store i32 %ashr, i32 addrspace(1)* %out, align 4
ret void
}
; FUNC-LABEL: {{^}}sext_in_reg_i8_to_v1i32:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-05 14:50:53 +00:00
; SI: s_add_i32 [[VAL:s[0-9]+]],
; SI: s_sext_i32_i8 [[EXTRACT:s[0-9]+]], [[VAL]]
; SI: v_mov_b32_e32 [[VEXTRACT:v[0-9]+]], [[EXTRACT]]
; SI: buffer_store_dword [[VEXTRACT]],
; EG: MEM_{{.*}} STORE_{{.*}} [[RES:T[0-9]+\.[XYZW]]], [[ADDR:T[0-9]+.[XYZW]]]
; EG: ADD_INT
; EG-NEXT: BFE_INT [[RES]], {{.*}}, 0.0, literal
; EG-NEXT: LSHR * [[ADDR]]
define void @sext_in_reg_i8_to_v1i32(<1 x i32> addrspace(1)* %out, <1 x i32> %a, <1 x i32> %b) nounwind {
%c = add <1 x i32> %a, %b ; add to prevent folding into extload
%shl = shl <1 x i32> %c, <i32 24>
%ashr = ashr <1 x i32> %shl, <i32 24>
store <1 x i32> %ashr, <1 x i32> addrspace(1)* %out, align 4
ret void
}
; FUNC-LABEL: {{^}}sext_in_reg_i1_to_i64:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-05 14:50:53 +00:00
; SI: s_mov_b32 {{s[0-9]+}}, -1
; SI: s_add_i32 [[VAL:s[0-9]+]],
; SI: s_bfe_i32 s{{[0-9]+}}, s{{[0-9]+}}, 0x10000
; SI: buffer_store_dwordx2
define void @sext_in_reg_i1_to_i64(i64 addrspace(1)* %out, i64 %a, i64 %b) nounwind {
%c = add i64 %a, %b
%shl = shl i64 %c, 63
%ashr = ashr i64 %shl, 63
store i64 %ashr, i64 addrspace(1)* %out, align 8
ret void
}
; FUNC-LABEL: {{^}}sext_in_reg_i8_to_i64:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-05 14:50:53 +00:00
; SI: s_mov_b32 {{s[0-9]+}}, -1
; SI: s_add_i32 [[VAL:s[0-9]+]],
; SI: s_sext_i32_i8 [[EXTRACT:s[0-9]+]], [[VAL]]
; SI: buffer_store_dwordx2
; EG: MEM_{{.*}} STORE_{{.*}} [[RES_LO:T[0-9]+\.[XYZW]]], [[ADDR_LO:T[0-9]+.[XYZW]]]
; EG: MEM_{{.*}} STORE_{{.*}} [[RES_HI:T[0-9]+\.[XYZW]]], [[ADDR_HI:T[0-9]+.[XYZW]]]
; EG: ADD_INT
; EG-NEXT: BFE_INT {{\*?}} [[RES_LO]], {{.*}}, 0.0, literal
; EG: ASHR [[RES_HI]]
; EG-NOT: BFE_INT
; EG: LSHR
; EG: LSHR
;; TODO Check address computation, using | with variables in {{}} does not work,
;; also the _LO/_HI order might be different
define void @sext_in_reg_i8_to_i64(i64 addrspace(1)* %out, i64 %a, i64 %b) nounwind {
%c = add i64 %a, %b
%shl = shl i64 %c, 56
%ashr = ashr i64 %shl, 56
store i64 %ashr, i64 addrspace(1)* %out, align 8
ret void
}
; FUNC-LABEL: {{^}}sext_in_reg_i16_to_i64:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-05 14:50:53 +00:00
; SI: s_mov_b32 {{s[0-9]+}}, -1
; SI: s_add_i32 [[VAL:s[0-9]+]],
; SI: s_sext_i32_i16 [[EXTRACT:s[0-9]+]], [[VAL]]
; SI: buffer_store_dwordx2
; EG: MEM_{{.*}} STORE_{{.*}} [[RES_LO:T[0-9]+\.[XYZW]]], [[ADDR_LO:T[0-9]+.[XYZW]]]
; EG: MEM_{{.*}} STORE_{{.*}} [[RES_HI:T[0-9]+\.[XYZW]]], [[ADDR_HI:T[0-9]+.[XYZW]]]
; EG: ADD_INT
; EG-NEXT: BFE_INT {{\*?}} [[RES_LO]], {{.*}}, 0.0, literal
; EG: ASHR [[RES_HI]]
; EG-NOT: BFE_INT
; EG: LSHR
; EG: LSHR
;; TODO Check address computation, using | with variables in {{}} does not work,
;; also the _LO/_HI order might be different
define void @sext_in_reg_i16_to_i64(i64 addrspace(1)* %out, i64 %a, i64 %b) nounwind {
%c = add i64 %a, %b
%shl = shl i64 %c, 48
%ashr = ashr i64 %shl, 48
store i64 %ashr, i64 addrspace(1)* %out, align 8
ret void
}
; FUNC-LABEL: {{^}}sext_in_reg_i32_to_i64:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-05 14:50:53 +00:00
; SI: s_load_dword
; SI: s_load_dword
; SI: s_add_i32 [[ADD:s[0-9]+]],
; SI: s_ashr_i32 s{{[0-9]+}}, [[ADD]], 31
; SI: buffer_store_dwordx2
; EG: MEM_{{.*}} STORE_{{.*}} [[RES_LO:T[0-9]+\.[XYZW]]], [[ADDR_LO:T[0-9]+.[XYZW]]]
; EG: MEM_{{.*}} STORE_{{.*}} [[RES_HI:T[0-9]+\.[XYZW]]], [[ADDR_HI:T[0-9]+.[XYZW]]]
; EG-NOT: BFE_INT
; EG: ADD_INT {{\*?}} [[RES_LO]]
; EG: ASHR [[RES_HI]]
; EG: ADD_INT
; EG: LSHR
; EG: LSHR
;; TODO Check address computation, using | with variables in {{}} does not work,
;; also the _LO/_HI order might be different
define void @sext_in_reg_i32_to_i64(i64 addrspace(1)* %out, i64 %a, i64 %b) nounwind {
%c = add i64 %a, %b
%shl = shl i64 %c, 32
%ashr = ashr i64 %shl, 32
store i64 %ashr, i64 addrspace(1)* %out, align 8
ret void
}
; This is broken on Evergreen for some reason related to the <1 x i64> kernel arguments.
; XFUNC-LABEL: {{^}}sext_in_reg_i8_to_v1i64:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-05 14:50:53 +00:00
; XSI: s_bfe_i32 [[EXTRACT:s[0-9]+]], {{s[0-9]+}}, 524288
; XSI: s_ashr_i32 {{v[0-9]+}}, [[EXTRACT]], 31
; XSI: buffer_store_dword
; XEG: BFE_INT
; XEG: ASHR
; define void @sext_in_reg_i8_to_v1i64(<1 x i64> addrspace(1)* %out, <1 x i64> %a, <1 x i64> %b) nounwind {
; %c = add <1 x i64> %a, %b
; %shl = shl <1 x i64> %c, <i64 56>
; %ashr = ashr <1 x i64> %shl, <i64 56>
; store <1 x i64> %ashr, <1 x i64> addrspace(1)* %out, align 8
; ret void
; }
; FUNC-LABEL: {{^}}sext_in_reg_i1_in_i32_other_amount:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-05 14:50:53 +00:00
; SI-NOT: {{[^@]}}bfe
; SI: s_lshl_b32 [[REG:s[0-9]+]], {{s[0-9]+}}, 6
; SI: s_ashr_i32 {{s[0-9]+}}, [[REG]], 7
; EG: MEM_{{.*}} STORE_{{.*}} [[RES:T[0-9]+\.[XYZW]]], [[ADDR:T[0-9]+.[XYZW]]]
; EG-NOT: BFE
; EG: ADD_INT
; EG: LSHL
; EG: ASHR [[RES]]
; EG: LSHR {{\*?}} [[ADDR]]
define void @sext_in_reg_i1_in_i32_other_amount(i32 addrspace(1)* %out, i32 %a, i32 %b) nounwind {
%c = add i32 %a, %b
%x = shl i32 %c, 6
%y = ashr i32 %x, 7
store i32 %y, i32 addrspace(1)* %out
ret void
}
; FUNC-LABEL: {{^}}sext_in_reg_v2i1_in_v2i32_other_amount:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-05 14:50:53 +00:00
; SI-DAG: s_lshl_b32 [[REG0:s[0-9]+]], {{s[0-9]}}, 6
; SI-DAG: s_ashr_i32 {{s[0-9]+}}, [[REG0]], 7
; SI-DAG: s_lshl_b32 [[REG1:s[0-9]+]], {{s[0-9]}}, 6
; SI-DAG: s_ashr_i32 {{s[0-9]+}}, [[REG1]], 7
; SI: s_endpgm
; EG: MEM_{{.*}} STORE_{{.*}} [[RES:T[0-9]+]]{{\.[XYZW][XYZW]}}, [[ADDR:T[0-9]+.[XYZW]]]
; EG-NOT: BFE
; EG: ADD_INT
; EG: LSHL
; EG: ASHR [[RES]]
; EG: LSHL
; EG: ASHR [[RES]]
; EG: LSHR {{\*?}} [[ADDR]]
define void @sext_in_reg_v2i1_in_v2i32_other_amount(<2 x i32> addrspace(1)* %out, <2 x i32> %a, <2 x i32> %b) nounwind {
%c = add <2 x i32> %a, %b
%x = shl <2 x i32> %c, <i32 6, i32 6>
%y = ashr <2 x i32> %x, <i32 7, i32 7>
store <2 x i32> %y, <2 x i32> addrspace(1)* %out, align 2
ret void
}
; FUNC-LABEL: {{^}}sext_in_reg_v2i1_to_v2i32:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-05 14:50:53 +00:00
; SI: s_bfe_i32 {{s[0-9]+}}, {{s[0-9]+}}, 0x10000
; SI: s_bfe_i32 {{s[0-9]+}}, {{s[0-9]+}}, 0x10000
; SI: buffer_store_dwordx2
; EG: MEM_{{.*}} STORE_{{.*}} [[RES:T[0-9]+]]{{\.[XYZW][XYZW]}}, [[ADDR:T[0-9]+.[XYZW]]]
; EG: BFE_INT [[RES]]
; EG: BFE_INT [[RES]]
; EG: LSHR {{\*?}} [[ADDR]]
define void @sext_in_reg_v2i1_to_v2i32(<2 x i32> addrspace(1)* %out, <2 x i32> %a, <2 x i32> %b) nounwind {
%c = add <2 x i32> %a, %b ; add to prevent folding into extload
%shl = shl <2 x i32> %c, <i32 31, i32 31>
%ashr = ashr <2 x i32> %shl, <i32 31, i32 31>
store <2 x i32> %ashr, <2 x i32> addrspace(1)* %out, align 8
ret void
}
; FUNC-LABEL: {{^}}sext_in_reg_v4i1_to_v4i32:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-05 14:50:53 +00:00
; SI: s_bfe_i32 {{s[0-9]+}}, {{s[0-9]+}}, 0x10000
; SI: s_bfe_i32 {{s[0-9]+}}, {{s[0-9]+}}, 0x10000
; SI: s_bfe_i32 {{s[0-9]+}}, {{s[0-9]+}}, 0x10000
; SI: s_bfe_i32 {{s[0-9]+}}, {{s[0-9]+}}, 0x10000
; SI: buffer_store_dwordx4
; EG: MEM_{{.*}} STORE_{{.*}} [[RES:T[0-9]+]]{{\.[XYZW][XYZW][XYZW][XYZW]}}, [[ADDR:T[0-9]+.[XYZW]]]
; EG: BFE_INT [[RES]]
; EG: BFE_INT [[RES]]
; EG: BFE_INT [[RES]]
; EG: BFE_INT [[RES]]
; EG: LSHR {{\*?}} [[ADDR]]
define void @sext_in_reg_v4i1_to_v4i32(<4 x i32> addrspace(1)* %out, <4 x i32> %a, <4 x i32> %b) nounwind {
%c = add <4 x i32> %a, %b ; add to prevent folding into extload
%shl = shl <4 x i32> %c, <i32 31, i32 31, i32 31, i32 31>
%ashr = ashr <4 x i32> %shl, <i32 31, i32 31, i32 31, i32 31>
store <4 x i32> %ashr, <4 x i32> addrspace(1)* %out, align 8
ret void
}
; FUNC-LABEL: {{^}}sext_in_reg_v2i8_to_v2i32:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-05 14:50:53 +00:00
; SI: s_sext_i32_i8 {{s[0-9]+}}, {{s[0-9]+}}
; SI: s_sext_i32_i8 {{s[0-9]+}}, {{s[0-9]+}}
; SI: buffer_store_dwordx2
; EG: MEM_{{.*}} STORE_{{.*}} [[RES:T[0-9]+]]{{\.[XYZW][XYZW]}}, [[ADDR:T[0-9]+.[XYZW]]]
; EG: BFE_INT [[RES]]
; EG: BFE_INT [[RES]]
; EG: LSHR {{\*?}} [[ADDR]]
define void @sext_in_reg_v2i8_to_v2i32(<2 x i32> addrspace(1)* %out, <2 x i32> %a, <2 x i32> %b) nounwind {
%c = add <2 x i32> %a, %b ; add to prevent folding into extload
%shl = shl <2 x i32> %c, <i32 24, i32 24>
%ashr = ashr <2 x i32> %shl, <i32 24, i32 24>
store <2 x i32> %ashr, <2 x i32> addrspace(1)* %out, align 8
ret void
}
; FUNC-LABEL: {{^}}sext_in_reg_v4i8_to_v4i32:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-05 14:50:53 +00:00
; SI: s_sext_i32_i8 {{s[0-9]+}}, {{s[0-9]+}}
; SI: s_sext_i32_i8 {{s[0-9]+}}, {{s[0-9]+}}
; SI: s_sext_i32_i8 {{s[0-9]+}}, {{s[0-9]+}}
; SI: s_sext_i32_i8 {{s[0-9]+}}, {{s[0-9]+}}
; SI: buffer_store_dwordx4
; EG: MEM_{{.*}} STORE_{{.*}} [[RES:T[0-9]+]]{{\.[XYZW][XYZW][XYZW][XYZW]}}, [[ADDR:T[0-9]+.[XYZW]]]
; EG: BFE_INT [[RES]]
; EG: BFE_INT [[RES]]
; EG: BFE_INT [[RES]]
; EG: BFE_INT [[RES]]
; EG: LSHR {{\*?}} [[ADDR]]
define void @sext_in_reg_v4i8_to_v4i32(<4 x i32> addrspace(1)* %out, <4 x i32> %a, <4 x i32> %b) nounwind {
%c = add <4 x i32> %a, %b ; add to prevent folding into extload
%shl = shl <4 x i32> %c, <i32 24, i32 24, i32 24, i32 24>
%ashr = ashr <4 x i32> %shl, <i32 24, i32 24, i32 24, i32 24>
store <4 x i32> %ashr, <4 x i32> addrspace(1)* %out, align 8
ret void
}
; FUNC-LABEL: {{^}}sext_in_reg_v2i16_to_v2i32:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-05 14:50:53 +00:00
; SI: s_sext_i32_i16 {{s[0-9]+}}, {{s[0-9]+}}
; SI: s_sext_i32_i16 {{s[0-9]+}}, {{s[0-9]+}}
; SI: buffer_store_dwordx2
; EG: MEM_{{.*}} STORE_{{.*}} [[RES:T[0-9]+]]{{\.[XYZW][XYZW]}}, [[ADDR:T[0-9]+.[XYZW]]]
; EG: BFE_INT [[RES]]
; EG: BFE_INT [[RES]]
; EG: LSHR {{\*?}} [[ADDR]]
define void @sext_in_reg_v2i16_to_v2i32(<2 x i32> addrspace(1)* %out, <2 x i32> %a, <2 x i32> %b) nounwind {
%c = add <2 x i32> %a, %b ; add to prevent folding into extload
%shl = shl <2 x i32> %c, <i32 16, i32 16>
%ashr = ashr <2 x i32> %shl, <i32 16, i32 16>
store <2 x i32> %ashr, <2 x i32> addrspace(1)* %out, align 8
ret void
}
; FUNC-LABEL: {{^}}testcase:
define void @testcase(i8 addrspace(1)* %out, i8 %a) nounwind {
%and_a_1 = and i8 %a, 1
%cmp_eq = icmp eq i8 %and_a_1, 0
%cmp_slt = icmp slt i8 %a, 0
%sel0 = select i1 %cmp_slt, i8 0, i8 %a
%sel1 = select i1 %cmp_eq, i8 0, i8 %a
%xor = xor i8 %sel0, %sel1
store i8 %xor, i8 addrspace(1)* %out
ret void
}
; FUNC-LABEL: {{^}}testcase_3:
define void @testcase_3(i8 addrspace(1)* %out, i8 %a) nounwind {
%and_a_1 = and i8 %a, 1
%cmp_eq = icmp eq i8 %and_a_1, 0
%cmp_slt = icmp slt i8 %a, 0
%sel0 = select i1 %cmp_slt, i8 0, i8 %a
%sel1 = select i1 %cmp_eq, i8 0, i8 %a
%xor = xor i8 %sel0, %sel1
store i8 %xor, i8 addrspace(1)* %out
ret void
}
; FUNC-LABEL: {{^}}vgpr_sext_in_reg_v4i8_to_v4i32:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-05 14:50:53 +00:00
; SI: v_bfe_i32 [[EXTRACT:v[0-9]+]], {{v[0-9]+}}, 0, 8
; SI: v_bfe_i32 [[EXTRACT:v[0-9]+]], {{v[0-9]+}}, 0, 8
; SI: v_bfe_i32 [[EXTRACT:v[0-9]+]], {{v[0-9]+}}, 0, 8
; SI: v_bfe_i32 [[EXTRACT:v[0-9]+]], {{v[0-9]+}}, 0, 8
define void @vgpr_sext_in_reg_v4i8_to_v4i32(<4 x i32> addrspace(1)* %out, <4 x i32> addrspace(1)* %a, <4 x i32> addrspace(1)* %b) nounwind {
%loada = load <4 x i32> addrspace(1)* %a, align 16
%loadb = load <4 x i32> addrspace(1)* %b, align 16
%c = add <4 x i32> %loada, %loadb ; add to prevent folding into extload
%shl = shl <4 x i32> %c, <i32 24, i32 24, i32 24, i32 24>
%ashr = ashr <4 x i32> %shl, <i32 24, i32 24, i32 24, i32 24>
store <4 x i32> %ashr, <4 x i32> addrspace(1)* %out, align 8
ret void
}
; FUNC-LABEL: {{^}}vgpr_sext_in_reg_v4i16_to_v4i32:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-05 14:50:53 +00:00
; SI: v_bfe_i32 [[EXTRACT:v[0-9]+]], {{v[0-9]+}}, 0, 16
; SI: v_bfe_i32 [[EXTRACT:v[0-9]+]], {{v[0-9]+}}, 0, 16
define void @vgpr_sext_in_reg_v4i16_to_v4i32(<4 x i32> addrspace(1)* %out, <4 x i32> addrspace(1)* %a, <4 x i32> addrspace(1)* %b) nounwind {
%loada = load <4 x i32> addrspace(1)* %a, align 16
%loadb = load <4 x i32> addrspace(1)* %b, align 16
%c = add <4 x i32> %loada, %loadb ; add to prevent folding into extload
%shl = shl <4 x i32> %c, <i32 16, i32 16, i32 16, i32 16>
%ashr = ashr <4 x i32> %shl, <i32 16, i32 16, i32 16, i32 16>
store <4 x i32> %ashr, <4 x i32> addrspace(1)* %out, align 8
ret void
}
; FIXME: The BFE should really be eliminated. I think it should happen
; when computeKnownBitsForTargetNode is implemented for imax.
; FUNC-LABEL: {{^}}sext_in_reg_to_illegal_type:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-05 14:50:53 +00:00
; SI: buffer_load_sbyte
; SI: v_max_i32
; SI: v_bfe_i32
; SI: buffer_store_short
define void @sext_in_reg_to_illegal_type(i16 addrspace(1)* nocapture %out, i8 addrspace(1)* nocapture %src) nounwind {
%tmp5 = load i8 addrspace(1)* %src, align 1
%tmp2 = sext i8 %tmp5 to i32
%tmp3 = tail call i32 @llvm.AMDGPU.imax(i32 %tmp2, i32 0) nounwind readnone
%tmp4 = trunc i32 %tmp3 to i8
%tmp6 = sext i8 %tmp4 to i16
store i16 %tmp6, i16 addrspace(1)* %out, align 2
ret void
}
declare i32 @llvm.AMDGPU.bfe.i32(i32, i32, i32) nounwind readnone
; FUNC-LABEL: {{^}}bfe_0_width:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-05 14:50:53 +00:00
; SI-NOT: {{[^@]}}bfe
; SI: s_endpgm
define void @bfe_0_width(i32 addrspace(1)* %out, i32 addrspace(1)* %ptr) nounwind {
%load = load i32 addrspace(1)* %ptr, align 4
%bfe = call i32 @llvm.AMDGPU.bfe.i32(i32 %load, i32 8, i32 0) nounwind readnone
store i32 %bfe, i32 addrspace(1)* %out, align 4
ret void
}
; FUNC-LABEL: {{^}}bfe_8_bfe_8:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-05 14:50:53 +00:00
; SI: v_bfe_i32
; SI-NOT: {{[^@]}}bfe
; SI: s_endpgm
define void @bfe_8_bfe_8(i32 addrspace(1)* %out, i32 addrspace(1)* %ptr) nounwind {
%load = load i32 addrspace(1)* %ptr, align 4
%bfe0 = call i32 @llvm.AMDGPU.bfe.i32(i32 %load, i32 0, i32 8) nounwind readnone
%bfe1 = call i32 @llvm.AMDGPU.bfe.i32(i32 %bfe0, i32 0, i32 8) nounwind readnone
store i32 %bfe1, i32 addrspace(1)* %out, align 4
ret void
}
; FUNC-LABEL: {{^}}bfe_8_bfe_16:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-05 14:50:53 +00:00
; SI: v_bfe_i32 v{{[0-9]+}}, v{{[0-9]+}}, 0, 8
; SI: s_endpgm
define void @bfe_8_bfe_16(i32 addrspace(1)* %out, i32 addrspace(1)* %ptr) nounwind {
%load = load i32 addrspace(1)* %ptr, align 4
%bfe0 = call i32 @llvm.AMDGPU.bfe.i32(i32 %load, i32 0, i32 8) nounwind readnone
%bfe1 = call i32 @llvm.AMDGPU.bfe.i32(i32 %bfe0, i32 0, i32 16) nounwind readnone
store i32 %bfe1, i32 addrspace(1)* %out, align 4
ret void
}
; This really should be folded into 1
; FUNC-LABEL: {{^}}bfe_16_bfe_8:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-05 14:50:53 +00:00
; SI: v_bfe_i32 v{{[0-9]+}}, v{{[0-9]+}}, 0, 8
; SI-NOT: {{[^@]}}bfe
; SI: s_endpgm
define void @bfe_16_bfe_8(i32 addrspace(1)* %out, i32 addrspace(1)* %ptr) nounwind {
%load = load i32 addrspace(1)* %ptr, align 4
%bfe0 = call i32 @llvm.AMDGPU.bfe.i32(i32 %load, i32 0, i32 16) nounwind readnone
%bfe1 = call i32 @llvm.AMDGPU.bfe.i32(i32 %bfe0, i32 0, i32 8) nounwind readnone
store i32 %bfe1, i32 addrspace(1)* %out, align 4
ret void
}
; Make sure there isn't a redundant BFE
; FUNC-LABEL: {{^}}sext_in_reg_i8_to_i32_bfe:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-05 14:50:53 +00:00
; SI: s_sext_i32_i8 s{{[0-9]+}}, s{{[0-9]+}}
; SI-NOT: {{[^@]}}bfe
; SI: s_endpgm
define void @sext_in_reg_i8_to_i32_bfe(i32 addrspace(1)* %out, i32 %a, i32 %b) nounwind {
%c = add i32 %a, %b ; add to prevent folding into extload
%bfe = call i32 @llvm.AMDGPU.bfe.i32(i32 %c, i32 0, i32 8) nounwind readnone
%shl = shl i32 %bfe, 24
%ashr = ashr i32 %shl, 24
store i32 %ashr, i32 addrspace(1)* %out, align 4
ret void
}
; FUNC-LABEL: {{^}}sext_in_reg_i8_to_i32_bfe_wrong:
define void @sext_in_reg_i8_to_i32_bfe_wrong(i32 addrspace(1)* %out, i32 %a, i32 %b) nounwind {
%c = add i32 %a, %b ; add to prevent folding into extload
%bfe = call i32 @llvm.AMDGPU.bfe.i32(i32 %c, i32 8, i32 0) nounwind readnone
%shl = shl i32 %bfe, 24
%ashr = ashr i32 %shl, 24
store i32 %ashr, i32 addrspace(1)* %out, align 4
ret void
}
; FUNC-LABEL: {{^}}sextload_i8_to_i32_bfe:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-05 14:50:53 +00:00
; SI: buffer_load_sbyte
; SI-NOT: {{[^@]}}bfe
; SI: s_endpgm
define void @sextload_i8_to_i32_bfe(i32 addrspace(1)* %out, i8 addrspace(1)* %ptr) nounwind {
%load = load i8 addrspace(1)* %ptr, align 1
%sext = sext i8 %load to i32
%bfe = call i32 @llvm.AMDGPU.bfe.i32(i32 %sext, i32 0, i32 8) nounwind readnone
%shl = shl i32 %bfe, 24
%ashr = ashr i32 %shl, 24
store i32 %ashr, i32 addrspace(1)* %out, align 4
ret void
}
; FUNC-LABEL: {{^}}sextload_i8_to_i32_bfe_0:
; SI: .text
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-05 14:50:53 +00:00
; SI-NOT: {{[^@]}}bfe
; SI: s_endpgm
define void @sextload_i8_to_i32_bfe_0(i32 addrspace(1)* %out, i8 addrspace(1)* %ptr) nounwind {
%load = load i8 addrspace(1)* %ptr, align 1
%sext = sext i8 %load to i32
%bfe = call i32 @llvm.AMDGPU.bfe.i32(i32 %sext, i32 8, i32 0) nounwind readnone
%shl = shl i32 %bfe, 24
%ashr = ashr i32 %shl, 24
store i32 %ashr, i32 addrspace(1)* %out, align 4
ret void
}
; FUNC-LABEL: {{^}}sext_in_reg_i1_bfe_offset_0:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-05 14:50:53 +00:00
; SI-NOT: shr
; SI-NOT: shl
; SI: v_bfe_i32 v{{[0-9]+}}, v{{[0-9]+}}, 0, 1
; SI: s_endpgm
define void @sext_in_reg_i1_bfe_offset_0(i32 addrspace(1)* %out, i32 addrspace(1)* %in) nounwind {
%x = load i32 addrspace(1)* %in, align 4
%shl = shl i32 %x, 31
%shr = ashr i32 %shl, 31
%bfe = call i32 @llvm.AMDGPU.bfe.i32(i32 %shr, i32 0, i32 1)
store i32 %bfe, i32 addrspace(1)* %out, align 4
ret void
}
; FUNC-LABEL: {{^}}sext_in_reg_i1_bfe_offset_1:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-05 14:50:53 +00:00
; SI: buffer_load_dword
; SI-NOT: shl
; SI-NOT: shr
; SI: v_bfe_i32 v{{[0-9]+}}, v{{[0-9]+}}, 1, 1
; SI: s_endpgm
define void @sext_in_reg_i1_bfe_offset_1(i32 addrspace(1)* %out, i32 addrspace(1)* %in) nounwind {
%x = load i32 addrspace(1)* %in, align 4
%shl = shl i32 %x, 30
%shr = ashr i32 %shl, 30
%bfe = call i32 @llvm.AMDGPU.bfe.i32(i32 %shr, i32 1, i32 1)
store i32 %bfe, i32 addrspace(1)* %out, align 4
ret void
}
; FUNC-LABEL: {{^}}sext_in_reg_i2_bfe_offset_1:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-05 14:50:53 +00:00
; SI: buffer_load_dword
; SI: v_lshlrev_b32_e32 v{{[0-9]+}}, 30, v{{[0-9]+}}
; SI: v_ashrrev_i32_e32 v{{[0-9]+}}, 30, v{{[0-9]+}}
; SI: v_bfe_i32 v{{[0-9]+}}, v{{[0-9]+}}, 1, 2
; SI: s_endpgm
define void @sext_in_reg_i2_bfe_offset_1(i32 addrspace(1)* %out, i32 addrspace(1)* %in) nounwind {
%x = load i32 addrspace(1)* %in, align 4
%shl = shl i32 %x, 30
%shr = ashr i32 %shl, 30
%bfe = call i32 @llvm.AMDGPU.bfe.i32(i32 %shr, i32 1, i32 2)
store i32 %bfe, i32 addrspace(1)* %out, align 4
ret void
}