llvm/lib/Analysis/CodeMetrics.cpp

213 lines
7.9 KiB
C++
Raw Normal View History

//===- CodeMetrics.cpp - Code cost measurements ---------------------------===//
//
// The LLVM Compiler Infrastructure
//
// This file is distributed under the University of Illinois Open Source
// License. See LICENSE.TXT for details.
//
//===----------------------------------------------------------------------===//
//
// This file implements code cost measurement utilities.
//
//===----------------------------------------------------------------------===//
#include "llvm/Analysis/CodeMetrics.h"
#include "llvm/DataLayout.h"
#include "llvm/Function.h"
#include "llvm/IntrinsicInst.h"
#include "llvm/Support/CallSite.h"
using namespace llvm;
/// callIsSmall - If a call is likely to lower to a single target instruction,
/// or is otherwise deemed small return true.
/// TODO: Perhaps calls like memcpy, strcpy, etc?
bool llvm::callIsSmall(ImmutableCallSite CS) {
if (isa<IntrinsicInst>(CS.getInstruction()))
return true;
const Function *F = CS.getCalledFunction();
if (!F) return false;
if (F->hasLocalLinkage()) return false;
if (!F->hasName()) return false;
StringRef Name = F->getName();
// These will all likely lower to a single selection DAG node.
if (Name == "copysign" || Name == "copysignf" || Name == "copysignl" ||
Name == "fabs" || Name == "fabsf" || Name == "fabsl" ||
Name == "sin" || Name == "sinf" || Name == "sinl" ||
Name == "cos" || Name == "cosf" || Name == "cosl" ||
Name == "sqrt" || Name == "sqrtf" || Name == "sqrtl" )
return true;
// These are all likely to be optimized into something smaller.
if (Name == "pow" || Name == "powf" || Name == "powl" ||
Name == "exp2" || Name == "exp2l" || Name == "exp2f" ||
Name == "floor" || Name == "floorf" || Name == "ceil" ||
Name == "round" || Name == "ffs" || Name == "ffsl" ||
Name == "abs" || Name == "labs" || Name == "llabs")
return true;
return false;
}
bool llvm::isInstructionFree(const Instruction *I, const DataLayout *TD) {
Initial commit for the rewrite of the inline cost analysis to operate on a per-callsite walk of the called function's instructions, in breadth-first order over the potentially reachable set of basic blocks. This is a major shift in how inline cost analysis works to improve the accuracy and rationality of inlining decisions. A brief outline of the algorithm this moves to: - Build a simplification mapping based on the callsite arguments to the function arguments. - Push the entry block onto a worklist of potentially-live basic blocks. - Pop the first block off of the *front* of the worklist (for breadth-first ordering) and walk its instructions using a custom InstVisitor. - For each instruction's operands, re-map them based on the simplification mappings available for the given callsite. - Compute any simplification possible of the instruction after re-mapping, and store that back int othe simplification mapping. - Compute any bonuses, costs, or other impacts of the instruction on the cost metric. - When the terminator is reached, replace any conditional value in the terminator with any simplifications from the mapping we have, and add any successors which are not proven to be dead from these simplifications to the worklist. - Pop the next block off of the front of the worklist, and repeat. - As soon as the cost of inlining exceeds the threshold for the callsite, stop analyzing the function in order to bound cost. The primary goal of this algorithm is to perfectly handle dead code paths. We do not want any code in trivially dead code paths to impact inlining decisions. The previous metric was *extremely* flawed here, and would always subtract the average cost of two successors of a conditional branch when it was proven to become an unconditional branch at the callsite. There was no handling of wildly different costs between the two successors, which would cause inlining when the path actually taken was too large, and no inlining when the path actually taken was trivially simple. There was also no handling of the code *path*, only the immediate successors. These problems vanish completely now. See the added regression tests for the shiny new features -- we skip recursive function calls, SROA-killing instructions, and high cost complex CFG structures when dead at the callsite being analyzed. Switching to this algorithm required refactoring the inline cost interface to accept the actual threshold rather than simply returning a single cost. The resulting interface is pretty bad, and I'm planning to do lots of interface cleanup after this patch. Several other refactorings fell out of this, but I've tried to minimize them for this patch. =/ There is still more cleanup that can be done here. Please point out anything that you see in review. I've worked really hard to try to mirror at least the spirit of all of the previous heuristics in the new model. It's not clear that they are all correct any more, but I wanted to minimize the change in this single patch, it's already a bit ridiculous. One heuristic that is *not* yet mirrored is to allow inlining of functions with a dynamic alloca *if* the caller has a dynamic alloca. I will add this back, but I think the most reasonable way requires changes to the inliner itself rather than just the cost metric, and so I've deferred this for a subsequent patch. The test case is XFAIL-ed until then. As mentioned in the review mail, this seems to make Clang run about 1% to 2% faster in -O0, but makes its binary size grow by just under 4%. I've looked into the 4% growth, and it can be fixed, but requires changes to other parts of the inliner. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153812 91177308-0d34-0410-b5e6-96231b3b80d8
2012-03-31 12:42:41 +00:00
if (isa<PHINode>(I))
return true;
// If a GEP has all constant indices, it will probably be folded with
// a load/store.
if (const GetElementPtrInst *GEP = dyn_cast<GetElementPtrInst>(I))
return GEP->hasAllConstantIndices();
if (const IntrinsicInst *II = dyn_cast<IntrinsicInst>(I)) {
switch (II->getIntrinsicID()) {
default:
return false;
case Intrinsic::dbg_declare:
case Intrinsic::dbg_value:
case Intrinsic::invariant_start:
case Intrinsic::invariant_end:
case Intrinsic::lifetime_start:
case Intrinsic::lifetime_end:
case Intrinsic::objectsize:
case Intrinsic::ptr_annotation:
case Intrinsic::var_annotation:
// These intrinsics don't count as size.
return true;
}
}
if (const CastInst *CI = dyn_cast<CastInst>(I)) {
// Noop casts, including ptr <-> int, don't count.
if (CI->isLosslessCast())
return true;
Value *Op = CI->getOperand(0);
// An inttoptr cast is free so long as the input is a legal integer type
// which doesn't contain values outside the range of a pointer.
if (isa<IntToPtrInst>(CI) && TD &&
TD->isLegalInteger(Op->getType()->getScalarSizeInBits()) &&
Revert the majority of the next patch in the address space series: r165941: Resubmit the changes to llvm core to update the functions to support different pointer sizes on a per address space basis. Despite this commit log, this change primarily changed stuff outside of VMCore, and those changes do not carry any tests for correctness (or even plausibility), and we have consistently found questionable or flat out incorrect cases in these changes. Most of them are probably correct, but we need to devise a system that makes it more clear when we have handled the address space concerns correctly, and ideally each pass that gets updated would receive an accompanying test case that exercises that pass specificaly w.r.t. alternate address spaces. However, from this commit, I have retained the new C API entry points. Those were an orthogonal change that probably should have been split apart, but they seem entirely good. In several places the changes were very obvious cleanups with no actual multiple address space code added; these I have not reverted when I spotted them. In a few other places there were merge conflicts due to a cleaner solution being implemented later, often not using address spaces at all. In those cases, I've preserved the new code which isn't address space dependent. This is part of my ongoing effort to clean out the partial address space code which carries high risk and low test coverage, and not likely to be finished before the 3.2 release looms closer. Duncan and I would both like to see the above issues addressed before we return to these changes. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167222 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-01 09:14:31 +00:00
Op->getType()->getScalarSizeInBits() <= TD->getPointerSizeInBits())
Initial commit for the rewrite of the inline cost analysis to operate on a per-callsite walk of the called function's instructions, in breadth-first order over the potentially reachable set of basic blocks. This is a major shift in how inline cost analysis works to improve the accuracy and rationality of inlining decisions. A brief outline of the algorithm this moves to: - Build a simplification mapping based on the callsite arguments to the function arguments. - Push the entry block onto a worklist of potentially-live basic blocks. - Pop the first block off of the *front* of the worklist (for breadth-first ordering) and walk its instructions using a custom InstVisitor. - For each instruction's operands, re-map them based on the simplification mappings available for the given callsite. - Compute any simplification possible of the instruction after re-mapping, and store that back int othe simplification mapping. - Compute any bonuses, costs, or other impacts of the instruction on the cost metric. - When the terminator is reached, replace any conditional value in the terminator with any simplifications from the mapping we have, and add any successors which are not proven to be dead from these simplifications to the worklist. - Pop the next block off of the front of the worklist, and repeat. - As soon as the cost of inlining exceeds the threshold for the callsite, stop analyzing the function in order to bound cost. The primary goal of this algorithm is to perfectly handle dead code paths. We do not want any code in trivially dead code paths to impact inlining decisions. The previous metric was *extremely* flawed here, and would always subtract the average cost of two successors of a conditional branch when it was proven to become an unconditional branch at the callsite. There was no handling of wildly different costs between the two successors, which would cause inlining when the path actually taken was too large, and no inlining when the path actually taken was trivially simple. There was also no handling of the code *path*, only the immediate successors. These problems vanish completely now. See the added regression tests for the shiny new features -- we skip recursive function calls, SROA-killing instructions, and high cost complex CFG structures when dead at the callsite being analyzed. Switching to this algorithm required refactoring the inline cost interface to accept the actual threshold rather than simply returning a single cost. The resulting interface is pretty bad, and I'm planning to do lots of interface cleanup after this patch. Several other refactorings fell out of this, but I've tried to minimize them for this patch. =/ There is still more cleanup that can be done here. Please point out anything that you see in review. I've worked really hard to try to mirror at least the spirit of all of the previous heuristics in the new model. It's not clear that they are all correct any more, but I wanted to minimize the change in this single patch, it's already a bit ridiculous. One heuristic that is *not* yet mirrored is to allow inlining of functions with a dynamic alloca *if* the caller has a dynamic alloca. I will add this back, but I think the most reasonable way requires changes to the inliner itself rather than just the cost metric, and so I've deferred this for a subsequent patch. The test case is XFAIL-ed until then. As mentioned in the review mail, this seems to make Clang run about 1% to 2% faster in -O0, but makes its binary size grow by just under 4%. I've looked into the 4% growth, and it can be fixed, but requires changes to other parts of the inliner. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153812 91177308-0d34-0410-b5e6-96231b3b80d8
2012-03-31 12:42:41 +00:00
return true;
// A ptrtoint cast is free so long as the result is large enough to store
// the pointer, and a legal integer type.
if (isa<PtrToIntInst>(CI) && TD &&
TD->isLegalInteger(Op->getType()->getScalarSizeInBits()) &&
Revert the majority of the next patch in the address space series: r165941: Resubmit the changes to llvm core to update the functions to support different pointer sizes on a per address space basis. Despite this commit log, this change primarily changed stuff outside of VMCore, and those changes do not carry any tests for correctness (or even plausibility), and we have consistently found questionable or flat out incorrect cases in these changes. Most of them are probably correct, but we need to devise a system that makes it more clear when we have handled the address space concerns correctly, and ideally each pass that gets updated would receive an accompanying test case that exercises that pass specificaly w.r.t. alternate address spaces. However, from this commit, I have retained the new C API entry points. Those were an orthogonal change that probably should have been split apart, but they seem entirely good. In several places the changes were very obvious cleanups with no actual multiple address space code added; these I have not reverted when I spotted them. In a few other places there were merge conflicts due to a cleaner solution being implemented later, often not using address spaces at all. In those cases, I've preserved the new code which isn't address space dependent. This is part of my ongoing effort to clean out the partial address space code which carries high risk and low test coverage, and not likely to be finished before the 3.2 release looms closer. Duncan and I would both like to see the above issues addressed before we return to these changes. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167222 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-01 09:14:31 +00:00
Op->getType()->getScalarSizeInBits() >= TD->getPointerSizeInBits())
return true;
Initial commit for the rewrite of the inline cost analysis to operate on a per-callsite walk of the called function's instructions, in breadth-first order over the potentially reachable set of basic blocks. This is a major shift in how inline cost analysis works to improve the accuracy and rationality of inlining decisions. A brief outline of the algorithm this moves to: - Build a simplification mapping based on the callsite arguments to the function arguments. - Push the entry block onto a worklist of potentially-live basic blocks. - Pop the first block off of the *front* of the worklist (for breadth-first ordering) and walk its instructions using a custom InstVisitor. - For each instruction's operands, re-map them based on the simplification mappings available for the given callsite. - Compute any simplification possible of the instruction after re-mapping, and store that back int othe simplification mapping. - Compute any bonuses, costs, or other impacts of the instruction on the cost metric. - When the terminator is reached, replace any conditional value in the terminator with any simplifications from the mapping we have, and add any successors which are not proven to be dead from these simplifications to the worklist. - Pop the next block off of the front of the worklist, and repeat. - As soon as the cost of inlining exceeds the threshold for the callsite, stop analyzing the function in order to bound cost. The primary goal of this algorithm is to perfectly handle dead code paths. We do not want any code in trivially dead code paths to impact inlining decisions. The previous metric was *extremely* flawed here, and would always subtract the average cost of two successors of a conditional branch when it was proven to become an unconditional branch at the callsite. There was no handling of wildly different costs between the two successors, which would cause inlining when the path actually taken was too large, and no inlining when the path actually taken was trivially simple. There was also no handling of the code *path*, only the immediate successors. These problems vanish completely now. See the added regression tests for the shiny new features -- we skip recursive function calls, SROA-killing instructions, and high cost complex CFG structures when dead at the callsite being analyzed. Switching to this algorithm required refactoring the inline cost interface to accept the actual threshold rather than simply returning a single cost. The resulting interface is pretty bad, and I'm planning to do lots of interface cleanup after this patch. Several other refactorings fell out of this, but I've tried to minimize them for this patch. =/ There is still more cleanup that can be done here. Please point out anything that you see in review. I've worked really hard to try to mirror at least the spirit of all of the previous heuristics in the new model. It's not clear that they are all correct any more, but I wanted to minimize the change in this single patch, it's already a bit ridiculous. One heuristic that is *not* yet mirrored is to allow inlining of functions with a dynamic alloca *if* the caller has a dynamic alloca. I will add this back, but I think the most reasonable way requires changes to the inliner itself rather than just the cost metric, and so I've deferred this for a subsequent patch. The test case is XFAIL-ed until then. As mentioned in the review mail, this seems to make Clang run about 1% to 2% faster in -O0, but makes its binary size grow by just under 4%. I've looked into the 4% growth, and it can be fixed, but requires changes to other parts of the inliner. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153812 91177308-0d34-0410-b5e6-96231b3b80d8
2012-03-31 12:42:41 +00:00
// trunc to a native type is free (assuming the target has compare and
// shift-right of the same width).
if (TD && isa<TruncInst>(CI) &&
TD->isLegalInteger(TD->getTypeSizeInBits(CI->getType())))
return true;
// Result of a cmp instruction is often extended (to be used by other
// cmp instructions, logical or return instructions). These are usually
// nop on most sane targets.
if (isa<CmpInst>(CI->getOperand(0)))
return true;
}
return false;
}
/// analyzeBasicBlock - Fill in the current structure with information gleaned
/// from the specified block.
void CodeMetrics::analyzeBasicBlock(const BasicBlock *BB,
const DataLayout *TD) {
++NumBlocks;
unsigned NumInstsBeforeThisBB = NumInsts;
for (BasicBlock::const_iterator II = BB->begin(), E = BB->end();
II != E; ++II) {
Initial commit for the rewrite of the inline cost analysis to operate on a per-callsite walk of the called function's instructions, in breadth-first order over the potentially reachable set of basic blocks. This is a major shift in how inline cost analysis works to improve the accuracy and rationality of inlining decisions. A brief outline of the algorithm this moves to: - Build a simplification mapping based on the callsite arguments to the function arguments. - Push the entry block onto a worklist of potentially-live basic blocks. - Pop the first block off of the *front* of the worklist (for breadth-first ordering) and walk its instructions using a custom InstVisitor. - For each instruction's operands, re-map them based on the simplification mappings available for the given callsite. - Compute any simplification possible of the instruction after re-mapping, and store that back int othe simplification mapping. - Compute any bonuses, costs, or other impacts of the instruction on the cost metric. - When the terminator is reached, replace any conditional value in the terminator with any simplifications from the mapping we have, and add any successors which are not proven to be dead from these simplifications to the worklist. - Pop the next block off of the front of the worklist, and repeat. - As soon as the cost of inlining exceeds the threshold for the callsite, stop analyzing the function in order to bound cost. The primary goal of this algorithm is to perfectly handle dead code paths. We do not want any code in trivially dead code paths to impact inlining decisions. The previous metric was *extremely* flawed here, and would always subtract the average cost of two successors of a conditional branch when it was proven to become an unconditional branch at the callsite. There was no handling of wildly different costs between the two successors, which would cause inlining when the path actually taken was too large, and no inlining when the path actually taken was trivially simple. There was also no handling of the code *path*, only the immediate successors. These problems vanish completely now. See the added regression tests for the shiny new features -- we skip recursive function calls, SROA-killing instructions, and high cost complex CFG structures when dead at the callsite being analyzed. Switching to this algorithm required refactoring the inline cost interface to accept the actual threshold rather than simply returning a single cost. The resulting interface is pretty bad, and I'm planning to do lots of interface cleanup after this patch. Several other refactorings fell out of this, but I've tried to minimize them for this patch. =/ There is still more cleanup that can be done here. Please point out anything that you see in review. I've worked really hard to try to mirror at least the spirit of all of the previous heuristics in the new model. It's not clear that they are all correct any more, but I wanted to minimize the change in this single patch, it's already a bit ridiculous. One heuristic that is *not* yet mirrored is to allow inlining of functions with a dynamic alloca *if* the caller has a dynamic alloca. I will add this back, but I think the most reasonable way requires changes to the inliner itself rather than just the cost metric, and so I've deferred this for a subsequent patch. The test case is XFAIL-ed until then. As mentioned in the review mail, this seems to make Clang run about 1% to 2% faster in -O0, but makes its binary size grow by just under 4%. I've looked into the 4% growth, and it can be fixed, but requires changes to other parts of the inliner. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153812 91177308-0d34-0410-b5e6-96231b3b80d8
2012-03-31 12:42:41 +00:00
if (isInstructionFree(II, TD))
continue;
// Special handling for calls.
if (isa<CallInst>(II) || isa<InvokeInst>(II)) {
ImmutableCallSite CS(cast<Instruction>(II));
if (const Function *F = CS.getCalledFunction()) {
// If a function is both internal and has a single use, then it is
// extremely likely to get inlined in the future (it was probably
// exposed by an interleaved devirtualization pass).
if (!CS.isNoInline() && F->hasInternalLinkage() && F->hasOneUse())
++NumInlineCandidates;
// If this call is to function itself, then the function is recursive.
// Inlining it into other functions is a bad idea, because this is
// basically just a form of loop peeling, and our metrics aren't useful
// for that case.
if (F == BB->getParent())
isRecursive = true;
}
if (!callIsSmall(CS)) {
// Each argument to a call takes on average one instruction to set up.
NumInsts += CS.arg_size();
// We don't want inline asm to count as a call - that would prevent loop
// unrolling. The argument setup cost is still real, though.
if (!isa<InlineAsm>(CS.getCalledValue()))
++NumCalls;
}
}
if (const AllocaInst *AI = dyn_cast<AllocaInst>(II)) {
if (!AI->isStaticAlloca())
this->usesDynamicAlloca = true;
}
if (isa<ExtractElementInst>(II) || II->getType()->isVectorTy())
++NumVectorInsts;
if (const CallInst *CI = dyn_cast<CallInst>(II))
if (CI->hasFnAttr(Attribute::NoDuplicate))
notDuplicatable = true;
if (const InvokeInst *InvI = dyn_cast<InvokeInst>(II))
if (InvI->hasFnAttr(Attribute::NoDuplicate))
notDuplicatable = true;
++NumInsts;
}
if (isa<ReturnInst>(BB->getTerminator()))
++NumRets;
// We never want to inline functions that contain an indirectbr. This is
// incorrect because all the blockaddress's (in static global initializers
// for example) would be referring to the original function, and this indirect
// jump would jump from the inlined copy of the function into the original
// function which is extremely undefined behavior.
// FIXME: This logic isn't really right; we can safely inline functions
// with indirectbr's as long as no other function or global references the
// blockaddress of a block within the current function. And as a QOI issue,
// if someone is using a blockaddress without an indirectbr, and that
// reference somehow ends up in another function or global, we probably
// don't want to inline this function.
notDuplicatable |= isa<IndirectBrInst>(BB->getTerminator());
// Remember NumInsts for this BB.
NumBBInsts[BB] = NumInsts - NumInstsBeforeThisBB;
}
void CodeMetrics::analyzeFunction(Function *F, const DataLayout *TD) {
// If this function contains a call that "returns twice" (e.g., setjmp or
// _setjmp) and it isn't marked with "returns twice" itself, never inline it.
// This is a hack because we depend on the user marking their local variables
// as volatile if they are live across a setjmp call, and they probably
// won't do this in callers.
exposesReturnsTwice = F->callsFunctionThatReturnsTwice() &&
!F->getAttributes().hasAttribute(AttributeSet::FunctionIndex,
Attribute::ReturnsTwice);
// Look at the size of the callee.
for (Function::const_iterator BB = F->begin(), E = F->end(); BB != E; ++BB)
analyzeBasicBlock(&*BB, TD);
}