Summary:
By prepending `.text .thumb .balign 2` to the module-level inline
assembly from a Thumb module, the assembler will generate the assembly
from that module as Thumb, even if the destination module uses an ARM
triple. Similar directives are used for module-level inline assembly in
ARM modules.
The alignment and instruction set are reset based on the target triple
before emitting the first function label.
Reviewers: olista01, tejohnson, echristo, t.p.northover, rafael
Reviewed By: echristo
Subscribers: aemerson, javed.absar, eraman, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D34622
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@307772 91177308-0d34-0410-b5e6-96231b3b80d8
Refactor CmpHelper into something simpler. It was overkill to use
templates for this - instead, use a simple CmpConstants structure to
hold the opcodes and other constants that are different when selecting
int / float / double comparisons. Also, extract some of the helpers that
were in CmpHelper into ARMInstructionSelector and make use of some of
them when selecting other things than just compares.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@307766 91177308-0d34-0410-b5e6-96231b3b80d8
I used the wrong variable to update. This was even covered by a unittest
I wrote, and the comments for the unittest were correct (if confusing)
but the test itself just matched the buggy behavior. =[
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@307764 91177308-0d34-0410-b5e6-96231b3b80d8
Very similar to how we select s32 G_FCMP, the only thing that is
different is the exact opcodes that we use.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@307763 91177308-0d34-0410-b5e6-96231b3b80d8
This adds all the feature bits libgcc has. They will soon be added to compiler-rt as well. This adds a second 32 bit feature variable to hold the bits that are needed by getHostCPUName that are not in libgcc. libgcc had already used 31 of the 32 bits in the existing variable and we needed 3 bits so at minimum 2 bits would spill over. I chose to move all 3.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@307758 91177308-0d34-0410-b5e6-96231b3b80d8
This keeps the starting entries in the enums in sync with what's in gcc and in review D35214 for compiler-rt.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@307757 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Solves PR33689.
If the pointer size is less than the size of the type used for the array
size in an alloca (the <ty> type below) then we could trigger the assert in
the PR. In that example we have pointer size i16 and <ty> is i32.
<result> = alloca [inalloca] <type> [, <ty> <NumElements>] [, align <alignment>]
Handle the situation by allowing truncation as well as zero extension in
ObjectSizeOffsetVisitor::visitAllocaInst().
Also, we now detect overflow in visitAllocaInst(), similar to how it was
already done in visitCallSite().
Reviewers: craig.topper, rnk, george.burgess.iv
Reviewed By: george.burgess.iv
Subscribers: davide, llvm-commits
Differential Revision: https://reviews.llvm.org/D35003
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@307754 91177308-0d34-0410-b5e6-96231b3b80d8
This normally indicates mixed CFI + non-CFI compilation, and will
result in us treating the function in the same way as a function
defined outside of the LTO unit.
Part of PR33752.
Differential Revision: https://reviews.llvm.org/D35281
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@307744 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This allows tools like lld that process relocations
to apply data relocation correctly. This information
is required because relocation are stored as section
offset.
Subscribers: jfb, dschuff, jgravelle-google, aheejin
Differential Revision: https://reviews.llvm.org/D35234
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@307741 91177308-0d34-0410-b5e6-96231b3b80d8
Avoid duplicating DictScope with hand-written names everywhere. Print
the S_-prefixed symbol kind for every record. This should make it easier
to search for certain kinds of records when debugging PDB linking.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@307732 91177308-0d34-0410-b5e6-96231b3b80d8
This changes adds support for building runtimes for multiple
different targets using LLVM runtimes directory.
The implementation follow the model used already by the builtins
build which already supports this option. To specify the runtimes
targets to be built, use the LLVM_RUNTIME_TARGETS variable, where
the valuae is the list of targets to build runtimes for. To pass
a per target variable to the runtimes build, you can set
RUNTIMES_<target>_<variable> where <variable> will be passed to the
runtimes build for <target>.
Each runtime target (except for the default one) will be installed
into lib/<target> subdirectory. Build targets will be suffixed with
the target name.
Differential Revision: https://reviews.llvm.org/D32816
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@307731 91177308-0d34-0410-b5e6-96231b3b80d8
The issue is not if the value is pcrel. It is whether we have a
relocation or not.
If we have a relocation, the static linker will select the upper
bits. If we don't have a relocation, we have to do it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@307730 91177308-0d34-0410-b5e6-96231b3b80d8
[GlobalOpt] Remove unreachable blocks before optimizing a function.
While the change is presumably correct, it exposes a latent bug
in DI which breaks on of the CFI checks. I'll analyze it further
and try to understand what's going on.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@307729 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Custom DFS implementation allows us to skip over certain nodes without adding them to the visited map, which is not easily doable with llvm's dfs iterators. What's more, caching predecessors becomes easy.
This patch implements a single DFS function (template) for both forward and reverse DFS, which should be easier to maintain then separate two ones.
Skipping over nodes based on a predicate will be necessary later to implement incremental updates.
There also seems to be a very slight performance improved when bootstrapping clang with this patch on my machine (3:28s -> 3:26s) .
Reviewers: dberlin, sanjoy, davide, grosser
Reviewed By: dberlin
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34651
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@307727 91177308-0d34-0410-b5e6-96231b3b80d8
I encountered these when linking LLD, which uses atls.lib. Those objects
appear to use these uncommon symbol records:
0x115E S_HEAPALLOCSITE
0x113D S_ENVBLOCK
0x1113 S_GTHREAD32
0x1153 S_FILESTATIC
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@307725 91177308-0d34-0410-b5e6-96231b3b80d8
OpenCL 2.0 introduces the notion of memory scopes in atomic operations to
global and local memory. These scopes restrict how synchronization is
achieved, which can result in improved performance.
This change extends existing notion of synchronization scopes in LLVM to
support arbitrary scopes expressed as target-specific strings, in addition to
the already defined scopes (single thread, system).
The LLVM IR and MIR syntax for expressing synchronization scopes has changed
to use *syncscope("<scope>")*, where <scope> can be "singlethread" (this
replaces *singlethread* keyword), or a target-specific name. As before, if
the scope is not specified, it defaults to CrossThread/System scope.
Implementation details:
- Mapping from synchronization scope name/string to synchronization scope id
is stored in LLVM context;
- CrossThread/System and SingleThread scopes are pre-defined to efficiently
check for known scopes without comparing strings;
- Synchronization scope names are stored in SYNC_SCOPE_NAMES_BLOCK in
the bitcode.
Differential Revision: https://reviews.llvm.org/D21723
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@307722 91177308-0d34-0410-b5e6-96231b3b80d8
This patch implements the .module and .set directives for the MT ASE,
notably that .module sets the relevant flags in .MIPS.abiflags and .set
doesn't.
Reviewers: slthakur, atanasyan
Differential Revision: https://reviews.llvm.org/D35249
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@307716 91177308-0d34-0410-b5e6-96231b3b80d8
For ELF, a movw+movt pair is handled as two separate relocations.
If an offset should be applied to the symbol address, this offset is
stored as an immediate in the instruction (as opposed to stored as an
offset in the relocation itself).
Even though the actual value stored in the movt immediate after linking
is the top half of the value, we need to store the unshifted offset
prior to linking. When the relocation is made during linking, the offset
gets added to the target symbol value, and the upper half of the value
is stored in the instruction.
This makes sure that movw+movt with offset symbols get properly
handled, in case the offset addition in the lower half should be
carried over to the upper half.
This makes the output from the additions to the test case match
the output from GNU binutils.
For COFF and MachO, the movw/movt relocations are handled as a pair,
and the overflow from the lower half gets carried over to the movt,
so they should keep the shifted offset just as before.
Differential Revision: https://reviews.llvm.org/D35242
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@307713 91177308-0d34-0410-b5e6-96231b3b80d8
This is fine as nothing in the code relies on leader and memory
leader being the same for a given congruency class. Ack'ed by
Dan.
Fixes PR33720.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@307699 91177308-0d34-0410-b5e6-96231b3b80d8
The warning is reproducible with GCC 4.8. Thanks to David Blaikie for
the suggested fix.
The reported warning was
```
/usr/local/google/home/echristo/sources/llvm/lib/Fuzzer/FuzzerExtFunctions.def:29:10: warning: ISO C++ forbids casting between pointer-to-function and pointer-to-object [-Wpedantic]
EXT_FUNC(__lsan_enable, void, (), false);
^
/usr/local/google/home/echristo/sources/llvm/lib/Fuzzer/FuzzerExtFunctionsWeak.cpp:44:24: note: in definition of macro ‘EXT_FUNC’
CheckFnPtr((void *)::NAME, #NAME, WARN);
^
```
Differential Revision: https://reviews.llvm.org/D35243
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@307686 91177308-0d34-0410-b5e6-96231b3b80d8
The loop structure for the outer loop does not contain the epilog
preheader when we try to unroll inner loop with multiple exits and
epilog code is generated. For now, we just bail out in such cases.
Added a test case that shows the problem. Without this bailout, we would
trip on assert saying LCSSA form is incorrect for outer loop.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@307676 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Patch by Klaus Kretzschmar
We would like to introduce a new type of llvm error handler for handling
bad alloc fault situations. LLVM already provides a fatal error handler
for serious non-recoverable error situations which by default writes
some error information to stderr and calls exit(1) at the end (functions
are marked as 'noreturn').
For long running processes (e.g. a server application), exiting the
process is not an acceptable option, especially not when the system is
in a temporary resource bottleneck with a good chance to recover from
this fault situation. In such a situation you would rather throw an
exception to stop the current compilation and try to overcome the
resource bottleneck. The user should be aware of the problem of throwing
an exception in bad alloc situations, e.g. you must not do any
allocations in the unwind chain. This is especially true when adding
exceptions in existing unfamiliar code (as already stated in the comment
of the current fatal error handler)
So the new handler can also be used to distinguish from general fatal
error situations where recovering is no option. It should be used in
cases where a clean unwind after the allocation is guaranteed.
This patch contains:
- A report_bad_alloc function which calls a user defined bad alloc
error handler. If no user handler is registered the
report_fatal_error function is called. This function is not marked as
'noreturn'.
- A install/restore_bad_alloc_error_handler to install/restore the bad
alloc handler.
- An example (in Mutex.cpp) where the report_bad_alloc function is
called in case of a malloc returns a nullptr.
If this patch gets accepted we would create similar patches to fix
corresponding malloc/calloc usages in the llvm code.
Reviewers: chandlerc, greened, baldrick, rnk
Reviewed By: rnk
Subscribers: llvm-commits, MatzeB
Differential Revision: https://reviews.llvm.org/D34753
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@307673 91177308-0d34-0410-b5e6-96231b3b80d8
1. The available program storage region of the red zone to compilers is 288
bytes rather than 244 bytes.
2. The formula for negative number alignment calculation should be
y = x & ~(n-1) rather than y = (x + (n-1)) & ~(n-1).
Differential Revision: https://reviews.llvm.org/D34337
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@307672 91177308-0d34-0410-b5e6-96231b3b80d8
