The DBI stream contains a lot of bookkeeping information for other
streams. In particular it contains information about section contributions
and linked modules. This patch is a first attempt at parsing some of the
information out of the DBI stream. It currently only parses and dumps the
headers of the DBI stream, so none of the module data or section
contribution data is pulled out.
This is just a proof of concept that we understand the basic properties of
the DBI stream's metadata, and followup patches will try to extract more
detailed information out.
Differential Revision: http://reviews.llvm.org/D19500
Reviewed By: majnemer, ruiu
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267585 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes a number of endianness issues as well as an ODR
violation that hopefully causes everything to be happy.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267431 91177308-0d34-0410-b5e6-96231b3b80d8
The dwo_name was added to dwo files to improve diagnostics in dwp, but
it confuses tools that attempt to load any dwo named by a dwo_name, even
ones inside dwos. Avoid this by keeping track of whether a unit is
already a dwo unit, and if so, not loading further dwos.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267241 91177308-0d34-0410-b5e6-96231b3b80d8
Rather than relying on the gmlt-like data emitted into the .o/executable
which only contains the simple name of any inlined functions, use the
.dwo file if present.
Test symbolication with/without a .dwo, and the old test that was
testing behavior when no gmlt-like data was present. (I haven't included
a test of non-gmlt-like data + no .dwo (that would be akin to
symbolication with no debug info) but we could add one for completeness)
The test was simplified a bit to be a little clearer (unoptimized, force
inline, using a function call as the inlined entity) and regenerated
with ToT clang. For the no-gmlt-like-data case, I modified Clang back to
its old behavior temporarily & the .dwo file is identical so it is
shared between the two executables.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267227 91177308-0d34-0410-b5e6-96231b3b80d8
r267049 broke multiple buildbots (e.g. clang-cmake-mips, and clang-x86_64-linux-selfhost-modules) which the follow-ups have not yet resolved and this is preventing subsequent committers from being notified about additional failures on the affected buildbots.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267148 91177308-0d34-0410-b5e6-96231b3b80d8
PDB parsing code was hand-rolled into llvm-pdbdump. This patch moves the
parsing of this code into DebugInfoPDB and makes the dumper use this.
This is achieved by implementing the skeleton of RawPdbSession, the
non-DIA counterpart to the existing PDB read interface. None of the type /
source file / etc information is accessible yet, so this implementation is
not yet close to achieving parity with the DIA counterpart, but the
RawSession class simply holds a reference to a PDBFile class which handles
parsing the file format. Additionally a PDBStream class is introduced
which allows accessing the bytes of a particular stream in a PDB file.
Differential Revision: http://reviews.llvm.org/D19343
Reviewed By: majnemer
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267049 91177308-0d34-0410-b5e6-96231b3b80d8
Produce another specific error message for a malformed Mach-O file when a symbol’s
string index is past the end of the string table. The existing test case in test/Object/macho-invalid.test
for macho-invalid-symbol-name-past-eof now reports the error with the message indicating
that a symbol at a specific index has a bad sting index and that bad string index value.
Again converting interfaces to Expected<> from ErrorOr<> does involve
touching a number of places. Where the existing code reported the error with a
string message or an error code it was converted to do the same. There is some
code for this that could be factored into a routine but I would like to leave that for
the code owners post-commit to do as they want for handling an llvm::Error. An
example of how this could be done is shown in the diff in
lib/ExecutionEngine/RuntimeDyld/RuntimeDyldImpl.h which had a Check() routine
already for std::error_code so I added one like it for llvm::Error .
Also there some were bugs in the existing code that did not deal with the
old ErrorOr<> return values. So now with Expected<> since they must be
checked and the error handled, I added a TODO and a comment:
“// TODO: Actually report errors helpfully” and a call something like
consumeError(NameOrErr.takeError()) so the buggy code will not crash
since needed to deal with the Error.
Note there fixes needed to lld that goes along with this that I will commit right after this.
So expect lld not to built after this commit and before the next one.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@266919 91177308-0d34-0410-b5e6-96231b3b80d8
1) We need to add this flag prior to adding any other, in case the user has
specified a -fmodule-cache-path= flag in their custom CXXFLAGS. Such a flag
causes -Werror builds to fail, and thus all config checks fail, until we add
the corresponding -fmodules flag. The modules selfhost bot does this, for
instance.
2) Delete module maps that were putting .cpp files into modules.
3) Enable -fmodules-local-submodule-visibility, to get proper module
visibility rules applied across submodules of the same module. Disable
-fmodules for C builds, since that flag is not available there.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@266502 91177308-0d34-0410-b5e6-96231b3b80d8
Produce the first specific error message for a malformed Mach-O file describing
the problem instead of the generic message for object_error::parse_failed of
"Invalid data was encountered while parsing the file”. Many more good error
messages will follow after this first one.
This is built on Lang Hames’ great work of adding the ’Error' class for
structured error handling and threading Error through MachOObjectFile
construction. And making createMachOObjectFile return Expected<...> .
So to to get the error to the llvm-obdump tool, I changed the stack of
these methods to also return Expected<...> :
object::ObjectFile::createObjectFile()
object::SymbolicFile::createSymbolicFile()
object::createBinary()
Then finally in ParseInputMachO() in MachODump.cpp the error can
be reported and the specific error message can be printed in llvm-objdump
and can be seen in the existing test case for the existing malformed binary
but with the updated error message.
Converting these interfaces to Expected<> from ErrorOr<> does involve
touching a number of places. To contain the changes for now use of
errorToErrorCode() and errorOrToExpected() are used where the callers
are yet to be converted.
Also there some were bugs in the existing code that did not deal with the
old ErrorOr<> return values. So now with Expected<> since they must be
checked and the error handled, I added a TODO and a comment:
“// TODO: Actually report errors helpfully” and a call something like
consumeError(ObjOrErr.takeError()) so the buggy code will not crash
since needed to deal with the Error.
Note there is one fix also needed to lld/COFF/InputFiles.cpp that goes along
with this that I will commit right after this. So expect lld not to built
after this commit and before the next one.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@265606 91177308-0d34-0410-b5e6-96231b3b80d8
in the test suite. While this is not really an interesting tool and option to run
on a Mach-O file to show the symbol table in a generic libObject format
it shouldn’t crash.
The reason for the crash was in MachOObjectFile::getSymbolType() when it was
calling MachOObjectFile::getSymbolSection() without checking its return value
for the error case.
What makes this fix require a fair bit of diffs is that the method getSymbolType() is
in the class ObjectFile defined without an ErrorOr<> so I needed to add that all
the sub classes. And all of the uses needed to be updated and the return value
needed to be checked for the error case.
The MachOObjectFile version of getSymbolType() “can” get an error in trying to
come up with the libObject’s internal SymbolRef::Type when the Mach-O symbol
symbol type is an N_SECT type because the code is trying to select from the
SymbolRef::ST_Data or SymbolRef::ST_Function values for the SymbolRef::Type.
And it needs the Mach-O section to use isData() and isBSS to determine if
it will return SymbolRef::ST_Data.
One other possible fix I considered is to simply return SymbolRef::ST_Other
when MachOObjectFile::getSymbolSection() returned an error. But since in
the past when I did such changes that “ate an error in the libObject code” I
was asked instead to push the error out of the libObject code I chose not
to implement the fix this way.
As currently written both the COFF and ELF versions of getSymbolType()
can’t get an error. But if isReservedSectionNumber() wanted to check for
the two known negative values rather than allowing all negative values or
the code wanted to add the same check as in getSymbolAddress() to use
getSection() and check for the error then these versions of getSymbolType()
could return errors.
At the end of the day the error printed now is the generic “Invalid data was
encountered while parsing the file” for object_error::parse_failed. In the
future when we thread Lang’s new TypedError for recoverable error handling
though libObject this will improve. And where the added // Diagnostic(…
comment is, it would be changed to produce and error message
like “bad section index (42) for symbol at index 8” for this case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@264187 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds a variety of different methods to query source
and line number information from PDB files.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@261239 91177308-0d34-0410-b5e6-96231b3b80d8
Also implements the PDBSymbolCompilandEnv::getValue() method,
which until now had been unimplemented specifically because
variant did not support string values.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@261173 91177308-0d34-0410-b5e6-96231b3b80d8
Every symbol, no matter what it's tag is, supports the method
getSymIndexId(). However, this was being forwarded on every
concrete symbol type, so if someone had a PDBSymbol that they
didn't know what type it was (or simply didn't have an instance
of the concrete symbol type), they would not be able to get its
index id. This patch moves the method up to PDBSymbol, so that
no matter what type of object you have, you can always get its
id.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@261153 91177308-0d34-0410-b5e6-96231b3b80d8
The IDiaSymbol::getValue() method returns a variant. Until now,
I had never encountered a string value, so the Variant wrapper
did not support VT_BSTR. Now we have need to support string
values, so this patch just adds support for one extra type to
Variant.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@261152 91177308-0d34-0410-b5e6-96231b3b80d8
The waring was:
lib/DebugInfo/DWARF/DWARFDebugFrame.cpp:643:20: warning: variable ‘LSDA’ set but not used
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@259877 91177308-0d34-0410-b5e6-96231b3b80d8
MCJIT emits zero-length CIE at the end of the _eh_frame section. This change
ensures that parser inside DebugInfo will not crash and correctly record such cases.
We are now recording DW_EH_PE_omit as a default value for FDE and LSDA encodings.
Also Offset != EndAugmentationOffset assertion check will only happen if augmentation
string had 'z' letter in it.
Differential Revision: http://reviews.llvm.org/D16588
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258931 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch is provided in preparation for removing autoconf on 1/26. The proposal to remove autoconf on 1/26 was discussed on the llvm-dev thread here: http://lists.llvm.org/pipermail/llvm-dev/2016-January/093875.html
"I felt a great disturbance in the [build system], as if millions of [makefiles] suddenly cried out in terror and were suddenly silenced. I fear something [amazing] has happened."
- Obi Wan Kenobi
Reviewers: chandlerc, grosbach, bob.wilson, tstellarAMD, echristo, whitequark
Subscribers: chfast, simoncook, emaste, jholewinski, tberghammer, jfb, danalbert, srhines, arsenm, dschuff, jyknight, dsanders, joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D16471
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258861 91177308-0d34-0410-b5e6-96231b3b80d8
Originally this change was causing failures on windows buildbots.
But those problems were fixed in r258806.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258811 91177308-0d34-0410-b5e6-96231b3b80d8
This rewrites and expands the existing codeview dumping functionality in
llvm-readobj using techniques similar to those in lib/Object. This defines a
number of new records and enums useful for reading memory mapped codeview
sections in COFF objects.
The dumper is intended as a testing tool for LLVM as it grows more codeview
output capabilities.
Reviewers: majnemer
Differential Revision: http://reviews.llvm.org/D16104
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@257658 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
There are a number of files in the tree which have been accidentally checked in with DOS line endings. Convert these to native line endings.
There are also a few files which have DOS line endings on purpose, and I have set the svn:eol-style property to 'CRLF' on those.
Reviewers: joerg, aaron.ballman
Subscribers: aaron.ballman, sanjoy, dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D15848
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@256707 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: This diff is the initial implementation of the LLVM CodeView library. There is much more work to be done, namely a CodeView dumper and tests. This patch should help others make progress on the LLVM->CodeView debug info emission while I continue with the implementation of the dumper and tests.
This library implements support for emitting debug info in the CodeView format. This phase of the implementation only includes support for CodeView type records. Clients that need to emit type records will use a class derived from TypeTableBuilder. TypeTableBuilder provides member functions for writing each kind of type record; each of these functions eventually calls the writeRecord virtual function to emit the actual bits of the record. Derived classes override writeRecord to implement the folding of duplicate records and the actual emission to the appropriate destination. LLVMCodeView provides MemoryTypeTableBuilder, which creates the table in memory. In the future, other classes derived from TypeTableBuilder will write to other destinations, such as the type stream in a PDB.
The rest of the types in LLVMCodeView define the actual CodeView type records and all of the supporting enums and other types used in the type records. The TypeIndex class is of particular interest, because it is used by clients as a handle to a type in the type table.
The library provides a relatively low-level interface based on the actual on-disk format of CodeView. For example, type records refer to other type records by TypeIndex, rather than by an actual pointer to the referent record. This allows clients to emit type records one at a time, rather than having to keep the entire transitive closure of type records in memory until everything has been emitted. At some point, having a higher-level interface layered on top of this one may be useful for debuggers and other tools that want a more holistic view of the debug info. The lower-level interface should be sufficient for compilers and linkers to do the debug info manipulation that they need to do efficiently.
Reviewers: rnk, majnemer
Subscribers: silvas, rnk, jevinskie, llvm-commits
Differential Revision: http://reviews.llvm.org/D14961
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@256385 91177308-0d34-0410-b5e6-96231b3b80d8
This code changes the way Symbolize handles parsed binaries: now
parsed OwningBinary<Binary> is not broken into (binary, memory buffer)
pair, and is just stored as-is in a cache. ObjectFile components
of Mach-O universal binaries are also stored explicitly in a
separate cache.
Additionally, this change:
* simplifies the code that parses/caches binaries: it's now done
in a single place, not three different functions.
* makes flush() method behave as expected, and actually clear
the cached parsed binaries and objects.
* fixes a dangling pointer issue described in
http://reviews.llvm.org/D15638
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@256041 91177308-0d34-0410-b5e6-96231b3b80d8
LLVM MC has single methods which can handle the output of EH frame and DWARF CIE's and FDE's.
This code improves DWARFDebugFrame::parse to do the same for parsing.
This also allows llvm-objdump to support the --dwarf=frames option which objdump supports. This
option dumps the .eh_frame section using the new code in DWARFDebugFrame::parse.
http://reviews.llvm.org/D15535
Reviewed by Rafael Espindola.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@256008 91177308-0d34-0410-b5e6-96231b3b80d8
