integer and floating-point opcodes, introducing
FAdd, FSub, and FMul.
For now, the AsmParser, BitcodeReader, and IRBuilder all preserve
backwards compatability, and the Core LLVM APIs preserve backwards
compatibility for IR producers. Most front-ends won't need to change
immediately.
This implements the first step of the plan outlined here:
http://nondot.org/sabre/LLVMNotes/IntegerOverflow.txt
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72897 91177308-0d34-0410-b5e6-96231b3b80d8
This only rejects mismatches between target specific calling convention
and C/LLVM specific calling convention.
There are too many fastcc/C, coldcc/cc42 mismatches in the testsuite, these are
not reject by the verifier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72248 91177308-0d34-0410-b5e6-96231b3b80d8
Path.cpp:59: warning: case label value exceeds maximum value for type
magic[0] is a (signed) char, but some case values are unsigned (e.g. 0xde).
When magic[0] was 0xde, the switch has taken the default branch instead of case
0xde branch.
Apparently this was the behaviour with older versions of gcc too, but not with g++.
Now g++-4.4 behaves as gcc, and ignores unsigned case values out of range signed
range.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@70038 91177308-0d34-0410-b5e6-96231b3b80d8
call, we should treat "i64 zext" as the start of a constant expr, but
"i64 0 zext" as an argument with an obsolete attribute on it (this form
is already tested by test/Assembler/2007-07-30-AutoUpgradeZextSext.ll).
Make the autoupgrade logic more discerning to avoid treating "i64 zext"
as an old-style attribute, causing us to reject a valid constant expr.
This fixes PR3876.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67682 91177308-0d34-0410-b5e6-96231b3b80d8
shift constant expressions, and add support for folding vector
shift constant expressions. This fixes PR3802.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67010 91177308-0d34-0410-b5e6-96231b3b80d8
stripped .bc file, it didn't make any attempt to try to reuse anonymous types.
This causes an amazing type explosion due to types getting duplicated everywhere
they are referenced and other problems.
This also caused correctness issues, because opaque types are unique for each time
they are uttered in the file. This means that stripping a .bc file could produce
a .ll file that could not be assembled (e.g. 2009-02-28-StripOpaqueName.ll).
This patch fixes both of these issues.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@65738 91177308-0d34-0410-b5e6-96231b3b80d8
and clean recursive descent parser.
This change has a couple of ramifications:
1. The parser code is about 400 lines shorter (in what we maintain, not
including what is autogenerated).
2. The code should be significantly faster than the old code because we
don't have to work around bison's poor handling of datatypes with
ctors/dtors. This also makes the code much more resistant to memory
leaks.
3. We now get caret diagnostics from the .ll parser, woo.
4. The actual diagnostics emited from the parser are completely different
so a bunch of testcases had to be updated.
5. I now disallow "%ty = type opaque %ty = type i32". There was no good
reason to support this, it was just an accident of the old
implementation. I have no reason to think that anyone is actually using
this.
6. The syntax for sticking a global variable has changed to make it
unambiguous. I don't think anyone is depending on this since only clang
supports this and it is not solid yet, so I'm not worried about anything
breaking.
7. This gets rid of the last use of bison, and along with it the .cvs files.
I'll prune this from the makefiles as a subsequent commit.
There are a few minor cleanups that can be done after this commit (suggestions
welcome!) but this passes dejagnu testing and is ready for its time in the
limelight.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61558 91177308-0d34-0410-b5e6-96231b3b80d8
integer type. Invalid things like 'float 42' are now rejected by the
semantic analysis in the productions not the parser. This fixes PR2733.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57560 91177308-0d34-0410-b5e6-96231b3b80d8
bitcode reader/writer as follows:
- add and use new bitcode FUNC_CODE_INST_VSELECT to handle the llvm
select opcode using either i1 or [N x i1] as the selector.
- retain old BITCODE FUNC_CODE_INST_SELECT in the bitcode reader to
handle select on i1 for backwards compatibility with existing bitcode
files.
- re-enable the vector-select.ll test program.
Also, rename the recently added bitcode opcode FUNC_CODE_INST_VCMP to
FUNC_CODE_INST_CMP2 and make the bitcode writer use it to handle
fcmp/icmp on scalars or vectors. In the bitcode writer, use
FUNC_CODE_INST_CMP for vfcmp/vicmp only. In the bitcode reader, have
FUNC_CODE_INST_CMP handle icmp/fcmp returning bool, for backwards
compatibility with existing bitcode files.
Patch by Preston Gurd!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56233 91177308-0d34-0410-b5e6-96231b3b80d8
way it handles the type of the condition is breaking plain
scalar select in the case that the value is a
forward-reference.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55976 91177308-0d34-0410-b5e6-96231b3b80d8
and, if so, to return a vector of boolean as a result;
Extend the select LLVM IR instruction to allow you to specify a result
type which is a vector of boolean, in which case the result will be an
element-wise selection instead of choosing one vector or the other; and
Update LangRef.html to describe these changes.
This patch was contributed by Preston Gurd!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55969 91177308-0d34-0410-b5e6-96231b3b80d8
cases quoting of <{ didn't work out, so I changed the grep to check for }>
instead.
This fixes 7 testcases that were not properly running before.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52182 91177308-0d34-0410-b5e6-96231b3b80d8
don't fail when (expected) error output is produced. This fixes 17 tests.
While I was there, I also made all RUN lines of the form "not llvm-as..." a bit
more consistent, they now all redirect stderr and stdout to /dev/null and use
input redirect to read their input.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52174 91177308-0d34-0410-b5e6-96231b3b80d8
types on functions, with adjustments so that it accepts both
new-style aggregate returns and old-style MRV returns, including those
with only a single member.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52157 91177308-0d34-0410-b5e6-96231b3b80d8
insertvalue and extractvalue to use constant indices instead of
Value* indices. And begin updating LangRef.html.
There's definately more to come here, but I'm checking this
basic support in now to make it available to people who are
interested.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51806 91177308-0d34-0410-b5e6-96231b3b80d8
and bitcode support for the extractvalue and insertvalue
instructions and constant expressions.
Note that this does not yet include CodeGen support.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51468 91177308-0d34-0410-b5e6-96231b3b80d8
regions of memory that have a target specific relationship, as described in the
Embedded C Technical Report.
This also implements the 2007-12-11-AddressSpaces test,
which demonstrates how address space attributes can be used in LLVM IR.
In addition, this patch changes the bitcode signature for stores (in a backwards
compatible manner), such that the pointer type, rather than the pointee type, is
encoded. This permits type information in the pointer (e.g. address space) to be
preserved for stores.
LangRef updates are forthcoming.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44858 91177308-0d34-0410-b5e6-96231b3b80d8
Reimplement the xform in Analysis/ConstantFolding.cpp where we can use
targetdata to validate that it is safe. While I'm in there, fix some const
correctness issues and generalize the interface to the "operand folder".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44817 91177308-0d34-0410-b5e6-96231b3b80d8
methods are new to Function:
bool hasCollector() const;
const std::string &getCollector() const;
void setCollector(const std::string &);
void clearCollector();
The assembly representation is as such:
define void @f() gc "shadow-stack" { ...
The implementation uses an on-the-side table to map Functions to
collector names, such that there is no overhead. A StringPool is
further used to unique collector names, which are extremely
likely to be unique per process.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44769 91177308-0d34-0410-b5e6-96231b3b80d8
the function type, instead they belong to functions
and function calls. This is an updated and slightly
corrected version of Reid Spencer's original patch.
The only known problem is that auto-upgrading of
bitcode files doesn't seem to work properly (see
test/Bitcode/AutoUpgradeIntrinsics.ll). Hopefully
a bitcode guru (who might that be? :) ) will fix it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44359 91177308-0d34-0410-b5e6-96231b3b80d8
This also changes the syntax for llvm.bswap, llvm.part.set, llvm.part.select, and llvm.ct* intrinsics. They are automatically upgraded by both the LLVM ASM reader and the bitcode reader. The test cases have been updated, with special tests added to ensure the automatic upgrading is supported.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@40807 91177308-0d34-0410-b5e6-96231b3b80d8
Make the AsmParser auto-upgrade the old zext and sext
keywords for parameter attributes and handle the
end-of-line ambiguity.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@40610 91177308-0d34-0410-b5e6-96231b3b80d8
Change the keywords for the zext and sext parameter attributes to be
zeroext and signext so they don't conflict with the keywords for the
instructions of the same name. This gets around the ambiguity.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@40069 91177308-0d34-0410-b5e6-96231b3b80d8
Make ParamAttrsList objects unique. You can no longer directly create or
destroy them but instead must go through the ParamAttrsList::get()
interface.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@36327 91177308-0d34-0410-b5e6-96231b3b80d8
Remove && from the end of the lines to prevent tests from throwing run
lines into the background. Also, clean up places where the same command
is run multiple times by using a temporary file.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@36142 91177308-0d34-0410-b5e6-96231b3b80d8
