load commands.
The existing test case in test/Object/macho-invalid.test for
macho-invalid-too-small-segment-load-command has a cmdsize of 55, while
being too small also it is not a multiple of 4. So when that check is added
this test case will produce a different error. So I constructed a new test case
that will trigger the intended error.
I also changed the error message to be consistent with the other malformed Mach-O
file error messages which prints the load command index. I also removed both
object_error::macho_load_segment_too_small and
object_error::macho_load_segment_too_many_sections from Object/Error.h
as they are not needed and can just use object_error::parse_failed and let the
error message string distinguish the specific error.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@268652 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Version 2 is now the default. If you want to emit version 1, use
the amdgcn--amdhsa-amdcov1 triple.
Reviewers: arsenm, kzhuravl
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D19283
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@268647 91177308-0d34-0410-b5e6-96231b3b80d8
command has a size less than 8 bytes.
I think the existing test case in test/Object/macho-invalid.test for
macho64-invalid-too-small-load-command was trying to test for this but that
test case triggered a different error given how it was constructed. So I
constructed a new test case that would trigger this specific error.
I also changed the error message to be consistent with the other malformed Mach-O
file error messages. I also removed object_error::macho_small_load_command from
Object/Error.h as it is not needed and can just use object_error::parse_failed
and let the error message string distinguish the error.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@268463 91177308-0d34-0410-b5e6-96231b3b80d8
command other than the first one is past the end of the load commands.
This is like the test case in test/Object/macho-invalid.test for
macho64-invalid-incomplete-load-command but it is the second load command
that is past the end of all the load commands instead of the first.
The code in the constructor for MachOObjectFile that loops over the load
commands used getNextLoadCommandInfo() which was not producing
a good error message. So that was fixed and a test case was added.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@268403 91177308-0d34-0410-b5e6-96231b3b80d8
Produce another specific error message for a malformed Mach-O file when a symbol’s
section index is more than the number of sections. The existing test case in test/Object/macho-invalid.test
for macho-invalid-section-index-getSectionRawName now reports the error with the message indicating
that a symbol at a specific index has a bad section index and that bad section index value.
Again converting interfaces to Expected<> from ErrorOr<> does involve
touching a number of places. Where the existing code reported the error with a
string message or an error code it was converted to do the same.
Also there some were bugs in the existing code that did not deal with the
old ErrorOr<> return values. So now with Expected<> since they must be
checked and the error handled, I added a TODO and a comment:
"// TODO: Actually report errors helpfully" and a call something like
consumeError(NameOrErr.takeError()) so the buggy code will not crash
since needed to deal with the Error.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@268298 91177308-0d34-0410-b5e6-96231b3b80d8
Produce another specific error message for a malformed Mach-O file when a symbol’s
string index is past the end of the string table. The existing test case in test/Object/macho-invalid.test
for macho-invalid-symbol-name-past-eof now reports the error with the message indicating
that a symbol at a specific index has a bad sting index and that bad string index value.
Again converting interfaces to Expected<> from ErrorOr<> does involve
touching a number of places. Where the existing code reported the error with a
string message or an error code it was converted to do the same. There is some
code for this that could be factored into a routine but I would like to leave that for
the code owners post-commit to do as they want for handling an llvm::Error. An
example of how this could be done is shown in the diff in
lib/ExecutionEngine/RuntimeDyld/RuntimeDyldImpl.h which had a Check() routine
already for std::error_code so I added one like it for llvm::Error .
Also there some were bugs in the existing code that did not deal with the
old ErrorOr<> return values. So now with Expected<> since they must be
checked and the error handled, I added a TODO and a comment:
“// TODO: Actually report errors helpfully” and a call something like
consumeError(NameOrErr.takeError()) so the buggy code will not crash
since needed to deal with the Error.
Note there fixes needed to lld that goes along with this that I will commit right after this.
So expect lld not to built after this commit and before the next one.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@266919 91177308-0d34-0410-b5e6-96231b3b80d8
And update the existing test cases in test/Object/macho-invalid.test
to use llvm-objdump with the -macho option to produce these
error messages and stop producing the generic "Invalid data
was encountered while parsing the file" message.
Working from the beginning of the file, if the mach header is too large for
the size of the file and then if the load commands that follow extend past
the end of the file these two errors now generate correct error messages.
Both of these have existing test cases in test/Object/macho-invalid.test .
But the first with macho-invalid-header it will never trigger the error message
"mach header extends past the end of the file" using any of the llvm tools as
they all use identify_magic() which rejects files with the correct magic number
that are too small in size. So I tested this by hacking that code and seeing the
error message down in parseHeader() really does happen. So in case there
is ever code in llvm that directly calls createMachOObjectFile() this error
message will be correctly produced.
The second error message of "load commands extends past the end of the file"
is triggered by a number of existing tests cases in test/Object/macho-invalid.test .
Also other tests trigger different error messages now like "ilocalsym plus
nlocalsym in LC_DYSYMTAB load command extends past the end of the
symbol table".
There are two existing test cases that still get the "Invalid data was encountered ..."
error messages that I will tackle next. But they will involve a bit of pluming an
Expect<...> up through the call stack and I want to do those as separate changes.
FYI, for those test cases that were trying to test specific errors that now get
different errors I’ll fix those in follow on changes and create new test cases
for those so they test the error they were meant to test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@266248 91177308-0d34-0410-b5e6-96231b3b80d8
Reenable reverted r265550 with endianness issue fixed. Variables of
endian-aware types such as ulittle32_t should be explicitly casted
to their natural equivalent types before passing it as vararg to
printf like functions (format in my case). Added lit config file
depending on AMDGPU target as the testcase uses assembler.
Differential revision: http://reviews.llvm.org/D16998
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@265645 91177308-0d34-0410-b5e6-96231b3b80d8
Produce the first specific error message for a malformed Mach-O file describing
the problem instead of the generic message for object_error::parse_failed of
"Invalid data was encountered while parsing the file”. Many more good error
messages will follow after this first one.
This is built on Lang Hames’ great work of adding the ’Error' class for
structured error handling and threading Error through MachOObjectFile
construction. And making createMachOObjectFile return Expected<...> .
So to to get the error to the llvm-obdump tool, I changed the stack of
these methods to also return Expected<...> :
object::ObjectFile::createObjectFile()
object::SymbolicFile::createSymbolicFile()
object::createBinary()
Then finally in ParseInputMachO() in MachODump.cpp the error can
be reported and the specific error message can be printed in llvm-objdump
and can be seen in the existing test case for the existing malformed binary
but with the updated error message.
Converting these interfaces to Expected<> from ErrorOr<> does involve
touching a number of places. To contain the changes for now use of
errorToErrorCode() and errorOrToExpected() are used where the callers
are yet to be converted.
Also there some were bugs in the existing code that did not deal with the
old ErrorOr<> return values. So now with Expected<> since they must be
checked and the error handled, I added a TODO and a comment:
“// TODO: Actually report errors helpfully” and a call something like
consumeError(ObjOrErr.takeError()) so the buggy code will not crash
since needed to deal with the Error.
Note there is one fix also needed to lld/COFF/InputFiles.cpp that goes along
with this that I will commit right after this. So expect lld not to built
after this commit and before the next one.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@265606 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r265550. There're problems with endianness on dumping instruction bytes. Need to find out how to use support::ulittle32_t type properly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@265554 91177308-0d34-0410-b5e6-96231b3b80d8
in the test suite. While this is not really an interesting tool and option to run
on a Mach-O file to show the symbol table in a generic libObject format
it shouldn’t crash.
The reason for the crash was in MachOObjectFile::getSymbolType() when it was
calling MachOObjectFile::getSymbolSection() without checking its return value
for the error case.
What makes this fix require a fair bit of diffs is that the method getSymbolType() is
in the class ObjectFile defined without an ErrorOr<> so I needed to add that all
the sub classes. And all of the uses needed to be updated and the return value
needed to be checked for the error case.
The MachOObjectFile version of getSymbolType() “can” get an error in trying to
come up with the libObject’s internal SymbolRef::Type when the Mach-O symbol
symbol type is an N_SECT type because the code is trying to select from the
SymbolRef::ST_Data or SymbolRef::ST_Function values for the SymbolRef::Type.
And it needs the Mach-O section to use isData() and isBSS to determine if
it will return SymbolRef::ST_Data.
One other possible fix I considered is to simply return SymbolRef::ST_Other
when MachOObjectFile::getSymbolSection() returned an error. But since in
the past when I did such changes that “ate an error in the libObject code” I
was asked instead to push the error out of the libObject code I chose not
to implement the fix this way.
As currently written both the COFF and ELF versions of getSymbolType()
can’t get an error. But if isReservedSectionNumber() wanted to check for
the two known negative values rather than allowing all negative values or
the code wanted to add the same check as in getSymbolAddress() to use
getSection() and check for the error then these versions of getSymbolType()
could return errors.
At the end of the day the error printed now is the generic “Invalid data was
encountered while parsing the file” for object_error::parse_failed. In the
future when we thread Lang’s new TypedError for recoverable error handling
though libObject this will improve. And where the added // Diagnostic(…
comment is, it would be changed to produce and error message
like “bad section index (42) for symbol at index 8” for this case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@264187 91177308-0d34-0410-b5e6-96231b3b80d8
In executable and shared object ELF files, relocations in the file contain the final virtual address rather than section offset so this is adjusted to display section offset.
Differential revision: http://reviews.llvm.org/D15965
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@263971 91177308-0d34-0410-b5e6-96231b3b80d8
The section alignment field was marked optional but not provided a
default value: initialize it with 0.
While we are here, ensure that the section alignment is plausible.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@263692 91177308-0d34-0410-b5e6-96231b3b80d8
The dynamic table is also an array of a fixed structure, so it can be
represented with a DynReginoInfo.
No major functionality change. The extra error checking is covered by
existing tests with a broken dynamic program header.
Idea extracted from r260488. I did the extra cleanups.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@261107 91177308-0d34-0410-b5e6-96231b3b80d8
We used to keep both a section and a pointer to the first symbol.
The oddity of keeping a section for dynamic symbols is because there is
a DT_SYMTAB but no DT_SYMTABZ, so to print the table we have to find the
size via a section table.
The reason for still keeping a pointer to the first symbol is because we
want to be able to print relocation tables even if the section table is
missing (it is mandatory only for files used in linking).
With this patch we keep just a DynRegionInfo. This then requires
changing a few places that were asking for a Elf_Shdr but actually just
needed the first symbol.
The test change is to delete the program header pointer.
Now that we use the information of both DT_SYMTAB and .dynsym, we don't
depend on the sh_entsize of .dynsym if we see DT_SYMTAB.
Note: It is questionable if it is worth it putting the effort to report
broken sh_entsize given that in files with no section table we have to
assume it is sizeof(Elf_Sym), but that is for another change.
Extracted from r260488.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@261099 91177308-0d34-0410-b5e6-96231b3b80d8
Original commit message:
[readobj] Dump DT_JMPREL relocations when outputting dynamic relocations.
The bits of r260488 it depends on have been committed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@260970 91177308-0d34-0410-b5e6-96231b3b80d8
This requires making an error message a bit more generic, but that seems
a reasonable tradeoff.
Extracted from r260488 but simplified a bit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@260967 91177308-0d34-0410-b5e6-96231b3b80d8
Original messages:
Revert "[readobj] Handle ELF files with no section table or with no program headers."
Revert "[readobj] Dump DT_JMPREL relocations when outputting dynamic relocations."
r260489 depends on r260488 and among other issues r260488 deleted error
handling code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@260962 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for finding the dynamic table and dynamic symbol table via
the section table or the program header table. If there's no section table an
attempt is made to figure out the length of the dynamic symbol table.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@260488 91177308-0d34-0410-b5e6-96231b3b80d8
at least as big as the mach header to be identified as a Mach-O file and
make sure smaller files are not identified as a Mach-O files but as
unknown files. Also fix identify_magic() so it looks at all 4 bytes of
the filetype field when determining the type of the Mach-O file.
Then fix the macho-invalid-header test case to check that it is an
unknown file and make sure it does not get the error for
object_error::parse_failed. And also update the unit tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258883 91177308-0d34-0410-b5e6-96231b3b80d8
llvm-objdump when printing the Mach Header to print the unknown
cputype and cpusubtype fields as decimal instead of not printing
them at all. And change the test to check for that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258826 91177308-0d34-0410-b5e6-96231b3b80d8
in MachOObjectFile::getSymbolByIndex() when a Mach-O file has
a symbol table load command but the number of symbols are zero.
The code in MachOObjectFile::symbol_begin_impl() should not be
assuming there is a symbol at index 0, in cases there is no symbol
table load command or the count of symbol is zero. So I also fixed
that. And needed to fix MachOObjectFile::symbol_end_impl() to
also do the same thing for no symbol table or one with zero entries.
The code in MachOObjectFile::getSymbolByIndex() should trigger
the report_fatal_error() for programmatic errors for any index when
there is no symbol table load command and not return the end iterator.
So also fixed that. Note there is no test case as this is a programmatic
error.
The test case using the file macho-invalid-bad-symbol-index has
a symbol table load command with its number of symbols (nsyms)
is zero. Which was incorrectly testing the bad triggering of the
report_fatal_error() in in MachOObjectFile::getSymbolByIndex().
This test case is an invalid Mach-O file but not for that reason.
It appears this Mach-O file use to have an nsyms value of 11,
and what makes this Mach-O file invalid is the counts and
indexes into the symbol table of the dynamic load command
are now invalid because the number of symbol table entries
(nsyms) is now zero. Which can be seen with the existing
llvm-obdump:
% llvm-objdump -private-headers macho-invalid-bad-symbol-index
…
Load command 4
cmd LC_SYMTAB
cmdsize 24
symoff 4216
nsyms 0
stroff 4392
strsize 144
Load command 5
cmd LC_DYSYMTAB
cmdsize 80
ilocalsym 0
nlocalsym 8 (past the end of the symbol table)
iextdefsym 8 (greater than the number of symbols)
nextdefsym 2 (past the end of the symbol table)
iundefsym 10 (greater than the number of symbols)
nundefsym 1 (past the end of the symbol table)
...
And the native darwin tools generates an error for this file:
% nm macho-invalid-bad-symbol-index
nm: object: macho-invalid-bad-symbol-index truncated or malformed object (ilocalsym plus nlocalsym in LC_DYSYMTAB load command extends past the end of the symbol table)
I added new checks for the indexes and sizes for these in the
constructor of MachOObjectFile. And added comments for what
would be a proper diagnostic messages.
And changed the test case using macho-invalid-bad-symbol-index
to test for the new error now produced.
Also added a test with a valid Mach-O file with a symbol table
load command where the number of symbols is zero that shows
the report_fatal_error() is not called.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258576 91177308-0d34-0410-b5e6-96231b3b80d8
but to return object_error::parse_failed. Then made the code in llvm-nm
do for Mach-O files what is done in the darwin native tools which is to
print "bad string index" for bad string indexes. Updated the error message
in the llvm-objdump test, and added tests to show llvm-nm prints
"bad string index" and a test to print the actual bad string index value
which in this case is 0xfe000002 when printing the fields as raw hex.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258520 91177308-0d34-0410-b5e6-96231b3b80d8
but to return object_error::parse_failed. Then made the code in llvm-nm
do for Mach-O files what is done in the darwin native tools which is to
print "(?,?)" or just "s" for bad section indexes. Also added a test to show
it prints the bad section index of "42" when printing the fields as raw hex.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258434 91177308-0d34-0410-b5e6-96231b3b80d8
Some architecture specific ELF section flags might have the same value
(for example SHF_X86_64_LARGE and SHF_HEX_GPREL) and we have to check
machine architectures to select an appropriate set of possible flags.
The patch selects architecture specific flags into separate arrays
`ElfxxxSectionFlags` and combines `ElfSectionFlags` and `ElfxxxSectionFlags`
before pass to the `StreamWriter::printFlags()` method.
Differential Revision: http://reviews.llvm.org/D16269
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258334 91177308-0d34-0410-b5e6-96231b3b80d8
We always create archives with just he filename as the member name, but
other archives can put a more complicated path in there.
This patches handles it by computing just the filename as we do when
adding a new member.
If storing the path is important for some reason, we should probably
have an orthogonal option for doing that and do it for both old and new
members.
Fixes pr25877.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@256001 91177308-0d34-0410-b5e6-96231b3b80d8
A manipulation (in this case, mkdir) can make slack between creating and touching %t.older/evenlen.
I would make this rewrote with python if this were still unstable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@254965 91177308-0d34-0410-b5e6-96231b3b80d8
Note, this was reviewed (and more details are in) http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151109/312083.html
These intrinsics currently have an explicit alignment argument which is
required to be a constant integer. It represents the alignment of the
source and dest, and so must be the minimum of those.
This change allows source and dest to each have their own alignments
by using the alignment attribute on their arguments. The alignment
argument itself is removed.
There are a few places in the code for which the code needs to be
checked by an expert as to whether using only src/dest alignment is
safe. For those places, they currently take the minimum of src/dest
alignments which matches the current behaviour.
For example, code which used to read:
call void @llvm.memcpy.p0i8.p0i8.i32(i8* %dest, i8* %src, i32 500, i32 8, i1 false)
will now read:
call void @llvm.memcpy.p0i8.p0i8.i32(i8* align 8 %dest, i8* align 8 %src, i32 500, i1 false)
For out of tree owners, I was able to strip alignment from calls using sed by replacing:
(call.*llvm\.memset.*)i32\ [0-9]*\,\ i1 false\)
with:
$1i1 false)
and similarly for memmove and memcpy.
I then added back in alignment to test cases which needed it.
A similar commit will be made to clang which actually has many differences in alignment as now
IRBuilder can generate different source/dest alignments on calls.
In IRBuilder itself, a new argument was added. Instead of calling:
CreateMemCpy(Dst, Src, getInt64(Size), DstAlign, /* isVolatile */ false)
you now call
CreateMemCpy(Dst, Src, getInt64(Size), DstAlign, SrcAlign, /* isVolatile */ false)
There is a temporary class (IntegerAlignment) which takes the source alignment and rejects
implicit conversion from bool. This is to prevent isVolatile here from passing its default
parameter to the source alignment.
Note, changes in future can now be made to codegen. I didn't change anything here, but this
change should enable better memcpy code sequences.
Reviewed by Hal Finkel.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@253511 91177308-0d34-0410-b5e6-96231b3b80d8
Also adds a 'trivial' ELF file. This was generated by assembling
and linking a file with the symbol main which contains a single
return instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@251096 91177308-0d34-0410-b5e6-96231b3b80d8
