This adds debug location to constant nodes of Selection DAG and updates
all places that create constants to pass debug locations
(see PR13269).
Can't guarantee that all locations are correct, but in a lot of cases choice
is obvious, so most of them should be. At least all tests pass.
Tests for these changes do not cover everything, instead just check it for
SDNodes, ARM and AArch64 where it's easy to get incorrect locations on
constants.
This is not complete fix as FastISel contains workaround for wrong debug
locations, which drops locations from instructions on processing constants,
but there isn't currently a way to use debug locations from constants there
as llvm::Constant doesn't cache it (yet). Although this is a bit different
issue, not directly related to these changes.
Differential Revision: http://reviews.llvm.org/D9084
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235977 91177308-0d34-0410-b5e6-96231b3b80d8
As a space optimization, this instruction would just encode the pointer
type of the first operand and use the knowledge that the second and
third operands would be of the pointee type of the first. When typed
pointers go away, this assumption will no longer be available - so
encode the type of the second operand explicitly and rely on that for
the third.
Test case added to demonstrate the backwards compatibility concern,
which only comes up when the definition of the second operand comes
after the use (hence the weird basic block sequence) - at which point
the type needs to be explicitly encoded in the bitcode and the record
length changes to accommodate this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235966 91177308-0d34-0410-b5e6-96231b3b80d8
This matches other assemblers and is less unexpected (e.g. PR23227).
On ELF, I tried binutils gas v2.24 and nasm 2.10.09, and they both
agree on LShr. On COFF, I couldn't get my hands on an assembler yet,
so don't change the behavior. For now, don't change it on non-AArch64
Darwin either, as the other assembler is gas v1.38, which does an AShr.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235963 91177308-0d34-0410-b5e6-96231b3b80d8
Support up to 2^16 arguments to a function. If we do hit the limit,
assert out rather than restarting at 0 as we've done historically.
This fixes PR23332. A clang test will follow.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235955 91177308-0d34-0410-b5e6-96231b3b80d8
Defaulting to AShr without consulting the target MCAsmInfo isn't OK.
Add a flag to fix that. Keep it off for now: target migrations will
follow in separate commits.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235951 91177308-0d34-0410-b5e6-96231b3b80d8
I previously thought switch clusters would need to use uint64_t in case
the weights of multiple cases overflowed a 32-bit int. It turns
out that the weights on a terminator instruction are capped to allow for
being added together, so using a uint32_t should be safe.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235945 91177308-0d34-0410-b5e6-96231b3b80d8
Reverse libLTO's default behaviour for preserving use-list order in
bitcode, and add API for controlling it. The default setting is now
`false` (don't preserve them), which is consistent with `clang`'s
default behaviour.
Users of libLTO should call `lto_codegen_should_embed_uselists(CG,true)`
prior to calling `lto_codegen_write_merged_modules()` whenever the
output file isn't part of the production workflow in order to reproduce
results with subsequent calls to `llc`.
(I haven't added tests since `llvm-lto` (the test tool for LTO) doesn't
support bitcode output, and even if it did: there isn't actually a good
way to test whether a tool has passed the flag. If the order is already
"natural" (if the order will already round-trip) then no use-list
directives are emitted at all. At some point I'll circle back to add
tests to `llvm-as` (etc.) that they actually respect the flag, at which
point I can somehow add a test here as well.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235943 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, the code would try to put a fall-through case last,
even if that meant moving a case with much higher branch weight
further down the chain.
Ordering by branch weight is most important, putting a fall-through
block last is secondary.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235942 91177308-0d34-0410-b5e6-96231b3b80d8
These look like copy/paste errors, and shouldn't have the "prior to"
qualifier. Each API was introduced at the given values of
`LTO_API_VERSION`. The "prior to" in other doxygen comments is because
I couldn't easily differentiate between versions 1 and 2 when I added
these comments.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235925 91177308-0d34-0410-b5e6-96231b3b80d8
After legalization, scalar SETCC has an i32 result type on AArch64.
The i1 requirement seems too conservative, replace it with an assert.
This also means that we now can run after legalization. That should also
be fine, since the ops legalizer runs again after each combine, and
all types created all have the same sizes as the (legal) inputs.
Exposed by r235917; while there, robustize its tests (bsl also uses the
register it defines).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235922 91177308-0d34-0410-b5e6-96231b3b80d8
PDB uses COFFObjectFile::getPE32Header which lives in libObject.
Make sure that LLVMBuild.txt reflects this dependency.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235920 91177308-0d34-0410-b5e6-96231b3b80d8
The gold binary is not required to build the plugin. All that is
needed is for LLVM_BINUTILS_INCDIR to point to the directory
containing plugin-api.h.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235918 91177308-0d34-0410-b5e6-96231b3b80d8
When the setcc has f64 operands, we can't build a vector setcc mask
to feed a vselect, because f64 doesn't divide v3f32 evenly.
Just bail out when that happens.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235917 91177308-0d34-0410-b5e6-96231b3b80d8
We need to dereference the signals mutex during handler registration so that we force its construction. This is to prevent the first use being during handling an actual signal because you can't safely allocate memory in a signal handler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235914 91177308-0d34-0410-b5e6-96231b3b80d8
Use a few extra bits in the const field (after widening it from a fixed
single bit) to stash the address space which is no longer provided by
the type (and an extra bit in there to specify that we're using that new
encoding).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235911 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds a new SSA MI pass that runs on little-endian PPC64
code with VSX enabled. Loads and stores of 4x32 and 2x64 vectors
without alignment constraints are accomplished for little-endian using
lxvd2x/xxswapd and xxswapd/stxvd2x. The existence of the additional
xxswapd instructions hurts performance in comparison with big-endian
code, but they are necessary in the general case to support correct
semantics.
However, the general case does not apply to most vector code. Many
vector instructions are lane-insensitive; they do not "care" which
lanes the parallel computations are performed within, provided that
the resulting data is stored into the correct locations. Thus this
pass looks for computations that perform only lane-insensitive
operations, and remove the unnecessary swaps from loads and stores in
such computations.
Future improvements will allow computations using certain
lane-sensitive operations to also be optimized in this manner, by
modifying the lane-sensitive operations to account for the permuted
order of the lanes. However, this patch only adds the infrastructure
to permit this; no lane-sensitive operations are optimized at this
time.
This code is heavily exercised by the various vectorizing applications
in the projects/test-suite tree. For the time being, I have only added
one simple test case to demonstrate what the pass is doing. Although
it is quite simple, it provides coverage for much of the code,
including the special case handling of copies and subreg-to-reg
operations feeding the swaps. I plan to add additional tests in the
future as I fill in more of the "special handling" code.
Two existing tests were affected, because they expected the swaps to
be present, but they are now removed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235910 91177308-0d34-0410-b5e6-96231b3b80d8
Use a loop instruction with a constant extender for a hardware
loop instruction that is too far away from the start of the loop.
This is cheaper than changing the SA register value.
Differential Revision: http://reviews.llvm.org/D9262
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235882 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Changed the warning message to show the current value of $at, similar to what clang does for typedef's, and renamed warnIfAssemblerTemporary to a more descriptive name.
I also changed the type of variables which store registers from int to unsigned, updated the relevant test and tried to make the related comments clearer.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8479
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235881 91177308-0d34-0410-b5e6-96231b3b80d8
This reapplies r235194, which was reverted in r235495 because it was causing a
failure in our out-of-tree buildbots for MIPS. With the sign-extension patch
in r235718, this patch doesn't cause any problem any more.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235878 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
When used, it is substituted with the number of .macro instantiations we've done up to that point in time.
So if this is the 1st time we've instantiated a .macro (any .macro, regardless of name), \@ will instantiate to 0, if it's the 2nd .macro instantiation, it will instantiate to 1 etc.
It can only be used inside a .macro definition, an .irp definition or an .irpc definition (those last 2 uses are undocumented).
Reviewers: echristo, rafael
Reviewed By: rafael
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D9197
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235862 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch adds constant folding of insertelement instruction to undef value when index operand is constant and is not less than vector size or is undef.
InstCombine does not support this case, but I'm happy to add it there also if this change is accepted.
Test Plan: Unittests and regression tests for ConstProp pass.
Reviewers: majnemer
Reviewed By: majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9287
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235854 91177308-0d34-0410-b5e6-96231b3b80d8
Patch to allow int8 vectors to be multiplied on the SSE unit instead of being scalarized.
The patch sign extends the i8 lanes to i16, uses the SSE2 pmullw multiplication instruction, then packs the lower byte from each result.
Differential Revision: http://reviews.llvm.org/D9115
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235837 91177308-0d34-0410-b5e6-96231b3b80d8
1) Turns out we're not great at recognizing redundant checks when one is a != and the other is an ==. This is a bug, but it's one that matters to frontend authors.
2) Frontends shouldn't use intrinsics unless strictly neccessary. This has been pretty widely proven by this point and is good to document.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235825 91177308-0d34-0410-b5e6-96231b3b80d8
Looking into 23095, my best guess is that the CodeGen library itself isn't getting linked and initialized properly. To make this slightly more obvious to consumers of LLVM, emit a different error message if we can tell that the registry is empty vs you've simply happened to name a collector which hasn't been registered.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235824 91177308-0d34-0410-b5e6-96231b3b80d8
