When looping through a destination pattern's operands to decide how many
default operands we need to introduce, we used to count the "expanded"
number of operands. So if one default operand would be rendered as 2
values, we'd count it as 2 operands, when in fact it needs to count as
only 1 operand regardless of how many values it expands to.
This turns out to be a problem only in some very specific cases, e.g.
when we have one operand with multiple default values followed by more
operands with default values (see the new test). In such a situation
we'd stop looping before looking at all the operands, and then error out
assuming that we don't have enough default operands to make up the
shortfall.
At the moment this only affects ARM.
The patch removes the loop counting default operands entirely and
assumes that we'll have to introduce values for any default operand that
we find (i.e. we're assuming it cannot be given as a child at all). It
also extracts the code for adding renderers for default operands into a
helper method.
Differential Revision: https://reviews.llvm.org/D33031
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303240 91177308-0d34-0410-b5e6-96231b3b80d8
--This line, and those below, will be igored--
A utils/vscode
A utils/vscode/README
A utils/vscode/tablegen
A utils/vscode/tablegen/.vscode
A utils/vscode/tablegen/.vscode/launch.json
A utils/vscode/tablegen/CHANGELOG.md
A utils/vscode/tablegen/README.md
A utils/vscode/tablegen/language-configuration.json
A utils/vscode/tablegen/package.json
A utils/vscode/tablegen/syntaxes
A utils/vscode/tablegen/syntaxes/TableGen.tmLanguage
A utils/vscode/tablegen/vsc-extension-quickstart.md
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@302553 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Do three things to help with that:
- Add AttributeList::FirstArgIndex, which is an enumerator currently set
to 1. It allows us to change the indexing scheme with fewer changes.
- Add addParamAttr/removeParamAttr. This just shortens addAttribute call
sites that would otherwise need to spell out FirstArgIndex.
- Remove some attribute-specific getters and setters from Function that
take attribute list indices. Most of these were only used from
BuildLibCalls, and doesNotAlias was only used to test or set if the
return value is malloc-like.
I'm happy to split the patch, but I think they are probably easier to
review when taken together.
This patch should be NFC, but it sets the stage to change the indexing
scheme to this, which is more convenient when indexing into an array:
0: func attrs
1: retattrs
2...: arg attrs
Reviewers: chandlerc, pete, javed.absar
Subscribers: david2050, llvm-commits
Differential Revision: https://reviews.llvm.org/D32811
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@302060 91177308-0d34-0410-b5e6-96231b3b80d8
Fixes PR31789 - When loop-vectorize tries to use these intrinsics for a
non-default address space pointer we fail with a "Calling a function with a
bad singature!" assertion. This patch solves this by adding the 'vector of
pointers' argument as an overloaded type which will determine the address
space.
Differential revision: https://reviews.llvm.org/D31490
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@302018 91177308-0d34-0410-b5e6-96231b3b80d8
If all jobs complete successfully, use pool.close() instead of
pool.terminate() before waiting for the workers. Zach Turner reported
that he was getting "access denied" exceptions from pool.terminate().
Make the workers abort immediately without printing to stderr when they
are interrupted.
Finally, catch exceptions when attempting to remove our temporary
testing directory. On abnormal exit, there can often be open handles
that haven't been cleaned up yet.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@301941 91177308-0d34-0410-b5e6-96231b3b80d8
Emit and use the TableGen instruction selector for ARM. At the moment,
this allows us to remove the hand-written code for selecting G_SDIV and
G_UDIV.
Future commits will focus on increasing the code coverage for it and
removing more dead code from the current instruction selector.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@301905 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Predicate<> now has a field to indicate how often it must be recomputed.
Currently, there are two frequencies, per-module (RecomputePerFunction==0)
and per-function (RecomputePerFunction==1). Per-function predicates are
currently recomputed more frequently than necessary since the only predicate
in this category is cheap to test. Per-module predicates are now computed in
getSubtargetImpl() while per-function predicates are computed in selectImpl().
Tablegen now manages the PredicateBitset internally. It should only be
necessary to add the required includes.
Also fixed a problem revealed by the test case where
constrainSelectedInstRegOperands() would attempt to tie operands that
BuildMI had already tied.
Reviewers: ab, qcolombet, t.p.northover, rovka, aditya_nandakumar
Reviewed By: rovka
Subscribers: kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D32491
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@301750 91177308-0d34-0410-b5e6-96231b3b80d8
The IntrNoMem, IntrReadMem, IntrWriteMem, and IntrArgMemOnly intrinsic
properties differ from their corresponding LLVM IR attributes by specifying
that the intrinsic, in addition to its memory properties, has no other side
effects.
The IntrHasSideEffects flag used in combination with one of the memory flags
listed above, makes it possible to define an intrinsic such that its
properties at the CodeGen layer match its properties at the IR layer.
Patch by Tom Stellard
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@301685 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
`git apply` on Windows doesn't work for files that SVN checks out as
CRLF. There is no way to force SVN to check everything out with Unix
line endings on Windows. Files with svn:eol-style=native will always
come out with CRLF, breaking `git apply`, which wants Unix line endings.
My workaround is to list all files with this property set in the change,
and run `dos2unix` on them. SVN doesn't commit a massive line ending
change because the svn:eol-style property indicates that these are text
files.
Tested on r301245.
Reviewers: zturner, jlebar
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32452
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@301262 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
It functions just like RegisterClass except that the class is obtained
from a field.
Depends on D31761.
Reviewers: ab, qcolombet, t.p.northover, rovka, kristof.beyls, aditya_nandakumar
Reviewed By: ab
Subscribers: dberris, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D32229
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@301080 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Some targets need to be able to do more complex rendering than just adding an
operand or two to an instruction. For example, it may need to insert an
instruction to extract a subreg first, or it may need to perform an operation
on the operand.
In SelectionDAG, targets would create SDNode's to achieve the desired effect
during the complex pattern predicate. This worked because SelectionDAG had a
form of garbage collection that would take care of SDNode's that were created
but not used due to a later predicate rejecting a match. This doesn't translate
well to GlobalISel and the churn was wasteful.
The API changes in this patch enable GlobalISel to accomplish the same thing
without the waste. The API is now:
InstructionSelector::OptionalComplexRendererFn selectArithImmed(MachineOperand &Root) const;
where Root is the root of the match. The return value can be omitted to
indicate that the predicate failed to match, or a function with the signature
ComplexRendererFn can be returned. For example:
return OptionalComplexRendererFn(
[=](MachineInstrBuilder &MIB) { MIB.addImm(Immed).addImm(ShVal); });
adds two immediate operands to the rendered instruction. Immed and ShVal are
captured from the predicate function.
As an added bonus, this also reduces the amount of information we need to
provide to GIComplexOperandMatcher.
Depends on D31418
Reviewers: aditya_nandakumar, t.p.northover, qcolombet, rovka, ab, javed.absar
Reviewed By: ab
Subscribers: dberris, kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D31761
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@301079 91177308-0d34-0410-b5e6-96231b3b80d8
canMutate() was returning true when the operands were all in the same order as
the matched instruction. However, it wasn't checking the operands were actually
on that instruction. This worked when we could only match a single instruction
but the addition of nested instruction matching led to cases where the operands
could be split across multiple instructions. canMutate() now returns false if
operands belong to instructions other than the root of the match.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@301077 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The SelectionDAG importer now imports rules with Predicate's attached via
Requires, PredicateControl, etc. These predicates are implemented as
bitset's to allow multiple predicates to be tested together. However,
unlike the MC layer subtarget features, each target only pays for it's own
predicates (e.g. AArch64 doesn't have 192 feature bits just because X86
needs a lot).
Both AArch64 and X86 derive at least one predicate from the MachineFunction
or Function so they must re-initialize AvailableFeatures before each
function. They also declare locals in <Target>InstructionSelector so that
computeAvailableFeatures() can use the code from SelectionDAG without
modification.
Reviewers: rovka, qcolombet, aditya_nandakumar, t.p.northover, ab
Reviewed By: rovka
Subscribers: aemerson, rengolin, dberris, kristof.beyls, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D31418
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@300993 91177308-0d34-0410-b5e6-96231b3b80d8
It's causing llvm-clang-x86_64-expensive-checks-win to fail to compile and I
haven't worked out why. Reverting to make it green while I figure it out.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@300978 91177308-0d34-0410-b5e6-96231b3b80d8
This should fix llvm-clang-x86_64-expensive-checks-win
I reproduced the error using the following code:
namespace llvm {
// Moving this out of the llvm namespace fixes the error.
template<unsigned NumBits> class PredicateBitsetImpl {};
}
namespace {
const unsigned MAX_SUBTARGET_PREDICATES = 11;
// This works on Clang but is broken on MSVC
// using PredicateBitset = PredicateBitsetImpl<MAX_SUBTARGET_PREDICATES>;
// Some versions emit a syntax error here ("error C2061: syntax error: identifier
// 'PredicateBitsetImpl'") but others accept it and only emit the C3646 below.
//
// This works on Clang and MSVC
using PredicateBitset = llvm::PredicateBitsetImpl<MAX_SUBTARGET_PREDICATES>;
class Foo {
private:
PredicateBitset A; // error C3646: 'A': unknown override specifier
};
}
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@300970 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The SelectionDAG importer now imports rules with Predicate's attached via
Requires, PredicateControl, etc. These predicates are implemented as
bitset's to allow multiple predicates to be tested together. However,
unlike the MC layer subtarget features, each target only pays for it's own
predicates (e.g. AArch64 doesn't have 192 feature bits just because X86
needs a lot).
Both AArch64 and X86 derive at least one predicate from the MachineFunction
or Function so they must re-initialize AvailableFeatures before each
function. They also declare locals in <Target>InstructionSelector so that
computeAvailableFeatures() can use the code from SelectionDAG without
modification.
Reviewers: rovka, qcolombet, aditya_nandakumar, t.p.northover, ab
Reviewed By: rovka
Subscribers: aemerson, rengolin, dberris, kristof.beyls, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D31418
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@300964 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
As far as instruction selection is concerned, all three appear to be same thing.
Support for these operands is experimental since AArch64 doesn't make use
of them and the in-tree targets that do use them (AMDGPU for
OperandWithDefaultOps, AMDGPU/ARM/Hexagon/Lanai for PredicateOperand, and ARM
for OperandWithDefaultOps) are not using tablegen-erated GlobalISel yet.
Reviewers: rovka, aditya_nandakumar, t.p.northover, qcolombet, ab
Reviewed By: rovka
Subscribers: inglorion, aemerson, rengolin, mehdi_amini, dberris, kristof.beyls, igorb, tpr, llvm-commits
Differential Revision: https://reviews.llvm.org/D31135
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@300037 91177308-0d34-0410-b5e6-96231b3b80d8
Both pickling errors encountered on clang bots and Darwin compiler-rt
should now be fixed.
This has no impact on testing time on Linux, and on Windows goes from
88s to 63s for 'check'. The tests pass on Mac, but I haven't compared
execution time.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@299775 91177308-0d34-0410-b5e6-96231b3b80d8
This is necessary to pass the lit test suite at llvm/utils/lit/tests.
There are some pre-existing failures here, but now switching to pools
doesn't regress any tests.
I had to change test-data/lit.cfg to import DummyConfig from a module to
fix pickling problems, but I think it'll be OK if we require test
formats to be written in real .py modules outside lit.cfg files.
I also discovered that in some circumstances AsyncResult.wait() will not
raise KeyboardInterrupt in a timely manner, but you can pass a non-zero
timeout to work around this. This makes threading.Condition.wait use a
polling loop that runs through the interpreter, so it's capable of
asynchronously raising KeyboardInterrupt.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@299605 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This drastically reduces lit test execution startup time on Windows. Our
previous strategy was to manually create one Process per job and manage
the worker pool ourselves. Instead, let's use the worker pool provided
by multiprocessing. multiprocessing.Pool(jobs) returns almost
immediately, and initializes the appropriate number of workers, so they
can all start executing tests immediately. This avoids the ramp-up
period that the old implementation suffers from. This appears to speed
up small test runs.
Here are some timings of the llvm-readobj tests on Windows using the
various execution strategies:
# multiprocessing.Pool:
$ for i in `seq 1 3`; do tim python ./bin/llvm-lit.py -sv ../llvm/test/tools/llvm-readobj/ --use-process-pool |& grep real: ; done
real: 0m1.156s
real: 0m1.078s
real: 0m1.094s
# multiprocessing.Process:
$ for i in `seq 1 3`; do tim python ./bin/llvm-lit.py -sv ../llvm/test/tools/llvm-readobj/ --use-processes |& grep real: ; done
real: 0m6.062s
real: 0m5.860s
real: 0m5.984s
# threading.Thread:
$ for i in `seq 1 3`; do tim python ./bin/llvm-lit.py -sv ../llvm/test/tools/llvm-readobj/ --use-threads |& grep real: ; done
real: 0m9.438s
real: 0m10.765s
real: 0m11.079s
I kept the old code to launch processes in case this change doesn't work
on all platforms that LLVM supports, but at some point I would like to
remove both the threading and old multiprocessing execution strategies.
Reviewers: modocache, rafael
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31677
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@299560 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Temporaries are now allocated to operands instead of predicates and this
allocation is used to correctly pair up the rendered operands with the
matched operands.
Previously, ComplexPatterns were allocated temporaries independently in the
Src Pattern and Dst Pattern, leading to mismatches. Additionally, the Dst
Pattern failed to account for the allocated index and therefore always used
temporary 0, 1, ... when it should have used base+0, base+1, ...
Thanks to Aditya Nandakumar for noticing the bug.
Depends on D30539
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Reviewed By: rovka
Subscribers: igorb, dberris, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D31054
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@299538 91177308-0d34-0410-b5e6-96231b3b80d8
Fix other cases of 'const StringRef' creeping back in at the same time.
This should fix the llvm-clang-x86_64-expensive-checks-win buildbot.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@299433 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Lift the restrictions that prevented the tree walking introduced in the
previous change and add support for patterns like:
(G_ADD (G_MUL (G_SEXT $src1), (G_SEXT $src2)), $src3) -> SMADDWrrr $dst, $src1, $src2, $src3
Also adds support for G_SEXT and G_ZEXT to support these cases.
One particular aspect of this that I should draw attention to is that I've
tried to be overly conservative in determining the safety of matches that
involve non-adjacent instructions and multiple basic blocks. This is intended
to be used as a cheap initial check and we may add a more expensive check in
the future. The current rules are:
* Reject if any instruction may load/store (we'd need to check for intervening
memory operations.
* Reject if any instruction has implicit operands.
* Reject if any instruction has unmodelled side-effects.
See isObviouslySafeToFold().
Reviewers: t.p.northover, javed.absar, qcolombet, aditya_nandakumar, ab, rovka
Reviewed By: ab
Subscribers: igorb, dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D30539
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@299430 91177308-0d34-0410-b5e6-96231b3b80d8
