Summary:
To enable profile-guided indirect call promotion in ThinLTO mode, we
simply add call graph edges for each profitable target from the profile
to the summaries, then the summary-guided importing will consider the
callee for importing as usual.
Also we need to enable the indirect call promotion pass creation in the
PassManagerBuilder when PerformThinLTO=true (we are in the ThinLTO
backend), so that the newly imported functions are considered for
promotion in the backends.
The IC promotion profiles refer to callees by GUID, which required
adding GUIDs to the per-module VST in bitcode (and assigning them
valueIds similar to how they are assigned valueIds in the combined
index).
Reviewers: mehdi_amini, xur
Subscribers: mehdi_amini, davidxl, llvm-commits
Differential Revision: http://reviews.llvm.org/D21932
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275707 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This complements the earlier addition of IntrWriteMem and IntrWriteArgMem
LLVM intrinsic properties, see D18291.
Also start using the attribute for memset, memcpy, and memmove intrinsics,
and remove their special-casing in BasicAliasAnalysis.
Reviewers: reames, joker.eph
Subscribers: joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D18714
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@274485 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This represents the adjustment applied to the implicit 'this' parameter
in the prologue of a virtual method in the MS C++ ABI. The adjustment is
always zero unless multiple inheritance is involved.
This increases the size of DISubprogram by 8 bytes, unfortunately. The
adjustment really is a signed 32-bit integer. If this size increase is
too much, we could probably win it back by splitting out a subclass with
info specific to virtual methods (virtuality, vindex, thisadjustment,
containingType).
Reviewers: aprantl, dexonsmith
Subscribers: aaboud, amccarth, llvm-commits
Differential Revision: http://reviews.llvm.org/D21614
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@274325 91177308-0d34-0410-b5e6-96231b3b80d8
The function name Module::empty() is slightly misleading in that it
only tests for the presence of functions in the module. However we
still want to emit the module summary if the module contains only
global variables or aliases. The presence of such entities can be
determined simply by checking the summary directly, as we are doing
below.
Differential Revision: http://reviews.llvm.org/D21669
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@273638 91177308-0d34-0410-b5e6-96231b3b80d8
This change is motivated by an upcoming change to the metadata representation
used for CFI. The indirect function call checker needs type information for
external function declarations in order to correctly generate jump table
entries for such declarations. We currently associate such type information
with declarations using a global metadata node, but I plan [1] to move all
such metadata to global object attachments.
In bitcode, metadata attachments for function declarations appear in the
global metadata block. This seems reasonable to me because I expect metadata
attachments on declarations to be uncommon. In the long term I'd also expect
this to be the case for CFI, because we'd want to use some specialized bitcode
format for this metadata that could be read as part of the ThinLTO thin-link
phase, which would mean that it would not appear in the global metadata block.
To solve the lazy loaded metadata issue I was seeing with D20147, I use the
same bitcode representation for metadata attachments for global variables as I
do for function declarations. Since there's a use case for metadata attachments
in the global metadata block, we might as well use that representation for
global variables as well, at least until we have a mechanism for lazy loading
global variables.
In the assembly format, the metadata attachments appear after the "declare"
keyword in order to avoid a parsing ambiguity.
[1] http://lists.llvm.org/pipermail/llvm-dev/2016-June/100462.html
Differential Revision: http://reviews.llvm.org/D21052
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@273336 91177308-0d34-0410-b5e6-96231b3b80d8
If a local_unnamed_addr attribute is attached to a global, the address
is known to be insignificant within the module. It is distinct from the
existing unnamed_addr attribute in that it only describes a local property
of the module rather than a global property of the symbol.
This attribute is intended to be used by the code generator and LTO to allow
the linker to decide whether the global needs to be in the symbol table. It is
possible to exclude a global from the symbol table if three things are true:
- This attribute is present on every instance of the global (which means that
the normal rule that the global must have a unique address can be broken without
being observable by the program by performing comparisons against the global's
address)
- The global has linkonce_odr linkage (which means that each linkage unit must have
its own copy of the global if it requires one, and the copy in each linkage unit
must be the same)
- It is a constant or a function (which means that the program cannot observe that
the unique-address rule has been broken by writing to the global)
Although this attribute could in principle be computed from the module
contents, LTO clients (i.e. linkers) will normally need to be able to compute
this property as part of symbol resolution, and it would be inefficient to
materialize every module just to compute it.
See:
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20160509/356401.htmlhttp://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20160516/356738.html
for earlier discussion.
Part of the fix for PR27553.
Differential Revision: http://reviews.llvm.org/D20348
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272709 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Now DISubroutineType has a 'cc' field which should be a DW_CC_ enum. If
it is present and non-zero, the backend will emit it as a
DW_AT_calling_convention attribute. On the CodeView side, we translate
it to the appropriate enum for the LF_PROCEDURE record.
I added a new LLVM vendor specific enum to the list of DWARF calling
conventions. DWARF does not appear to attempt to standardize these, so I
assume it's OK to do this until we coordinate with GCC on how to emit
vectorcall convention functions.
Reviewers: dexonsmith, majnemer, aaboud, amccarth
Subscribers: mehdi_amini, llvm-commits
Differential Revision: http://reviews.llvm.org/D21114
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272197 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds an IR, assembly and bitcode representation for metadata
attachments for globals. Future patches will port existing features to use
these new attachments.
Differential Revision: http://reviews.llvm.org/D20074
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@271348 91177308-0d34-0410-b5e6-96231b3b80d8
Calls are initialized from a DenseMap. We can sort them using the
value id to recover some determinism during serialization.
From: mehdi_amini <mehdi_amini@91177308-0d34-0410-b5e6-96231b3b80d8>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@269638 91177308-0d34-0410-b5e6-96231b3b80d8
GlobalVars Refs are initialized from a DenseSet. We can sort them
using the value id to recover some determinism during serialization.
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@269635 91177308-0d34-0410-b5e6-96231b3b80d8
Calls are initialized from a DenseMap. We can sort them using the
value id to recover some determinism during serialization.
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@269634 91177308-0d34-0410-b5e6-96231b3b80d8
Refs are initialized from a DenseSet. We can sort them using the
value id to recover some determinism during serialization.
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@269629 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes a debug assert on Windows from the new iterator
implementation added in r269059. The Windows std::vector iterator
operator== checks in debug mode that the containers being iterated over
are the same, which they may not be.
Fixed by checking that we are iterating over the same container before
comparing the container iterators.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@269232 91177308-0d34-0410-b5e6-96231b3b80d8
This restores commit r268627:
Summary:
When launching ThinLTO backends in a distributed build (currently
supported in gold via the thinlto-index-only plugin option), emit
an individual index file for each backend process as described here:
http://lists.llvm.org/pipermail/llvm-dev/2016-April/098272.html
...
Differential Revision: http://reviews.llvm.org/D19556
Address msan failures by avoiding std::prev on map.end(), the
theory is that this is causing issues due to some known UB problems
in __tree.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@269059 91177308-0d34-0410-b5e6-96231b3b80d8
The bitcode upgrade I added for DISubprogram in r266446 was based on the
assumption that the CU node for the subprogram was already materialized by the
time the DISubprogram is visited. This assumption may not hold true as future
versions of LLVM may decide to write out bitcode in a different order. This
patch corrects this by introducing a versioning bit next to the distinct flag to
unambiguously differentiate the new from the old record layouts.
Note for people stabilizing LLVM out-of-tree: This patch introduces a bitcode
incompatibility with llvm trunk revisions from r266446 — this commit. (But
D19987 will ensure that it degrades gracefully).
http://reviews.llvm.org/D20004
rdar://problem/26074194
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@268816 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
When launching ThinLTO backends in a distributed build (currently
supported in gold via the thinlto-index-only plugin option), emit
an individual index file for each backend process as described here:
http://lists.llvm.org/pipermail/llvm-dev/2016-April/098272.html
The individual index file encodes the summary and module information
required for implementing the importing/exporting decisions made
for a given module in the thin link step.
This is in place of the current mechanism that uses the combined index
to make importing decisions in each back end independently. It is an
enabler for doing global summary based optimizations in the thin link
step (which will be recorded in the individual index files), and reduces
the size of the index that must be sent to each backend process, and
the amount of work to scan it in the backends.
Rather than create entirely new ModuleSummaryIndex structures (and all
the included unique_ptrs) for each backend index file, a map is created
to record all of the GUID and summary pointers needed for a particular
index file. The IndexBitcodeWriter walks this map instead of the full
index (hiding the details of managing the appropriate summary iteration
in a new iterator subclass). This is more efficient than walking the
entire combined index and filtering out just the needed summaries during
each backend bitcode index write.
Depends on D19481.
Reviewers: joker.eph
Subscribers: llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D19556
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@268627 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
With the removal of support for lazy parsing of combined index summary
records (e.g. r267344), we no longer need to include the summary record
bitcode offset in the VST entries for definitions. Change the combined
index format to be similar to the per-module index format in using value
ids to cross-reference from the summary record to the VST entry (rather
than the summary record bitcode offset to cross-reference in the other
direction).
The visible changes are:
1) Add the value id to the combined summary records
2) Remove the summary offset from the combined VST records, which has
the following effects:
- No longer need the VST_CODE_COMBINED_GVDEFENTRY record, as all
combined index VST entries now only contain the value id and
corresponding GUID.
- No longer have duplicate VST entries in the case where there are
multiple definitions of a symbol (e.g. weak/linkonce), as they all
have the same value id and GUID.
An implication of #2 above is that in order to hook up an alias to the
correct aliasee based on the value id of the aliasee recorded in the
combined index alias record, we need to scan the entries in the index
for that GUID to find the one from the same module (i.e. the case where
there are multiple entries for the aliasee). But the reader no longer
has to maintain a special map to hook up the alias/aliasee.
Reviewers: joker.eph
Subscribers: joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D19481
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267712 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Remove the GlobalValueInfo and change the ModuleSummaryIndex to directly
reference summary objects. The info structure was there to support lazy
parsing of the combined index summary objects, which is no longer
needed and not supported.
Reviewers: joker.eph
Subscribers: joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D19462
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267344 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
As discussed in D18298, some local globals can't
be renamed/promoted (because they have a section, or because
they are referenced from inline assembly).
To be able to detect naming collision, we need to keep around
the "GUID" using their original name without taking the linkage
into account.
Reviewers: tejohnson
Subscribers: joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D19454
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267304 91177308-0d34-0410-b5e6-96231b3b80d8
Eliminate DITypeIdentifierMap and make DITypeRef a thin wrapper around
DIType*. It is no longer legal to refer to a DICompositeType by its
'identifier:', and DIBuilder no longer retains all types with an
'identifier:' automatically.
Aside from the bitcode upgrade, this is mainly removing logic to resolve
an MDString-based reference to an actualy DIType. The commits leading
up to this have made the implicit type map in DICompileUnit's
'retainedTypes:' field superfluous.
This does not remove DITypeRef, DIScopeRef, DINodeRef, and
DITypeRefArray, or stop using them in DI-related metadata. Although as
of this commit they aren't serving a useful purpose, there are patchces
under review to reuse them for CodeView support.
The tests in LLVM were updated with deref-typerefs.sh, which is attached
to the thread "[RFC] Lazy-loading of debug info metadata":
http://lists.llvm.org/pipermail/llvm-dev/2016-April/098318.html
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267296 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
As discussed in on the mailing list yesterday, I have refactored
BitcodeWriter.cpp to use classes to manage the bitcode writing process,
instead of passing around long lists of parameters between static
functions. See:
http://lists.llvm.org/pipermail/llvm-dev/2016-April/098610.html
I created a parent BitcodeWriter class to own the BitstreamWriter,
write the header, and contain the main entry point into the writing
process. There are two derived classes, one for writing a module and one
for writing a combined index file (for ThinLTO), which manage the
writing process specific to those bitcode file types.
I also changed the functions to conform to LLVM coding standards
(lowercase function name first letter). The only two routines that still
start with an uppercase letter are the two external interfaces, which
can be fixed as a follow-on (I wanted to keep this round just within
BitcodeWriter.cpp).
Reviewers: dexonsmith, joker.eph
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D19447
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267273 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch prevents importing from (and therefore exporting from) any
module with a "llvm.used" local value. Local values need to be promoted
and renamed when importing, and their presense on the llvm.used variable
indicates that there are opaque uses that won't see the rename. One such
example is a use in inline assembly.
See also the discussion at:
http://lists.llvm.org/pipermail/llvm-dev/2016-April/098047.html
As part of this, move collectUsedGlobalVariables out of Transforms/Utils
and into IR/Module so that it can be used more widely. There are several
other places in LLVM that used copies of this code that can be cleaned
up as a follow on NFC patch.
Reviewers: joker.eph
Subscribers: pcc, llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D18986
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@266877 91177308-0d34-0410-b5e6-96231b3b80d8
To be able to work accurately on the reference graph when taking
decision about internalizing, promoting, renaming, etc. We need
to have the alias information explicit.
Differential Revision: http://reviews.llvm.org/D18836
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@266517 91177308-0d34-0410-b5e6-96231b3b80d8
Currently each Function points to a DISubprogram and DISubprogram has a
scope field. For member functions the scope is a DICompositeType. DIScopes
point to the DICompileUnit to facilitate type uniquing.
Distinct DISubprograms (with isDefinition: true) are not part of the type
hierarchy and cannot be uniqued. This change removes the subprograms
list from DICompileUnit and instead adds a pointer to the owning compile
unit to distinct DISubprograms. This would make it easy for ThinLTO to
strip unneeded DISubprograms and their transitively referenced debug info.
Motivation
----------
Materializing DISubprograms is currently the most expensive operation when
doing a ThinLTO build of clang.
We want the DISubprogram to be stored in a separate Bitcode block (or the
same block as the function body) so we can avoid having to expensively
deserialize all DISubprograms together with the global metadata. If a
function has been inlined into another subprogram we need to store a
reference the block containing the inlined subprogram.
Attached to https://llvm.org/bugs/show_bug.cgi?id=27284 is a python script
that updates LLVM IR testcases to the new format.
http://reviews.llvm.org/D19034
<rdar://problem/25256815>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@266446 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
To be able to work accurately on the reference graph when taking decision
about internalizing, promoting, renaming, etc. We need to have the alias
information explicit.
Reviewers: tejohnson
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D18836
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@266214 91177308-0d34-0410-b5e6-96231b3b80d8
`allocsize` is a function attribute that allows users to request that
LLVM treat arbitrary functions as allocation functions.
This patch makes LLVM accept the `allocsize` attribute, and makes
`@llvm.objectsize` recognize said attribute.
The review for this was split into two patches for ease of reviewing:
D18974 and D14933. As promised on the revisions, I'm landing both
patches as a single commit.
Differential Revision: http://reviews.llvm.org/D14933
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@266032 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This is the first step in also serializing the index out to LLVM
assembly.
The per-module summary written to bitcode is moved out of the bitcode
writer and to a new analysis pass (ModuleSummaryIndexWrapperPass).
The pass itself uses a new builder class to compute index, and the
builder class is used directly in places where we don't have a pass
manager (e.g. llvm-as).
Because we are computing summaries outside of the bitcode writer, we no
longer can use value ids created by the bitcode writer's
ValueEnumerator. This required changing the reference graph edge type
to use a new ValueInfo class holding a union between a GUID (combined
index) and Value* (permodule index). The Value* are converted to the
appropriate value ID during bitcode writing.
Also, this enables removal of the BitWriter library's dependence on the
Analysis library that was previously required for the summary computation.
Reviewers: joker.eph
Subscribers: joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D18763
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@265941 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
In the context of http://wg21.link/lwg2445 C++ uses the concept of
'stronger' ordering but doesn't define it properly. This should be fixed
in C++17 barring a small question that's still open.
The code currently plays fast and loose with the AtomicOrdering
enum. Using an enum class is one step towards tightening things. I later
also want to tighten related enums, such as clang's
AtomicOrderingKind (which should be shared with LLVM as a 'C++ ABI'
enum).
This change touches a few lines of code which can be improved later, I'd
like to keep it as NFC for now as it's already quite complex. I have
related changes for clang.
As a follow-up I'll add:
bool operator<(AtomicOrdering, AtomicOrdering) = delete;
bool operator>(AtomicOrdering, AtomicOrdering) = delete;
bool operator<=(AtomicOrdering, AtomicOrdering) = delete;
bool operator>=(AtomicOrdering, AtomicOrdering) = delete;
This is separate so that clang and LLVM changes don't need to be in sync.
Reviewers: jyknight, reames
Subscribers: jyknight, llvm-commits
Differential Revision: http://reviews.llvm.org/D18775
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@265602 91177308-0d34-0410-b5e6-96231b3b80d8
Add a common parent class for ConstantArray, ConstantVector, and
ConstantStruct called ConstantAggregate. These are the aggregate
subclasses of Constant that take operands.
This is mainly a cleanup, adding common `isa` target and removing
duplicated code. However, it also simplifies caching which constants
point transitively at `GlobalValue` (a possible future direction).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@265466 91177308-0d34-0410-b5e6-96231b3b80d8
The index used to contain only Function, but now contains GlobalValue
in general.
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@265230 91177308-0d34-0410-b5e6-96231b3b80d8
Whenever metadata is only referenced by a single function, emit the
metadata just in that function block. This should improve lazy-loading
by reducing the amount of metadata in the global block.
For now, this should catch all DILocations, and anything else that
happens to be referenced only by a single function.
It's also a first step toward a couple of possible future directions
(which this commit does *not* implement):
1. Some debug info metadata is only referenced from compile units and
individual functions. If we can drop the link from the compile
unit, this optimization will get more powerful.
2. Any uniqued metadata that isn't referenced globally can in theory be
emitted in every function block that references it (trading off
bitcode size and full-parse time vs. lazy-load time).
Note: this assumes the new BitcodeReader error checking from r265223.
The metadata stored in function blocks gets purged after parsing each
function, which means unresolved forward references will get lost.
Since all the global metadata should have already been resolved by the
time we get to the function metadata blocks we just need to check for
that case. (If for some reason we need to handle bitcode that fails the
checks in r265223, the fix is to store about-to-be-dropped unresolved
nodes in MetadataList::shrinkTo until they can be handled succesfully by
a future call to MetadataList::tryToResolveCycles.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@265226 91177308-0d34-0410-b5e6-96231b3b80d8
Further unify the handling of function-local metadata with global
metadata, by exposing the same interface in ValueEnumerator. Both
contexts use the same accessors:
- getMDStrings(): get the strings for this block.
- getNonMDStrings(): get the non-strings for this block.
A future commit will start adding strings to the function-block.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@265224 91177308-0d34-0410-b5e6-96231b3b80d8
