had gotten out of sync: isCastable didn't think it was possible to
cast the x86_mmx type to anything, while it did think it possible
to cast an i64 to x86_mmx.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128705 91177308-0d34-0410-b5e6-96231b3b80d8
Some platforms may treat denormals as zero, on other platforms multiplication
with a subnormal is slower than dividing by a normal.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128555 91177308-0d34-0410-b5e6-96231b3b80d8
The idea is, that if an ieee 754 float is divided by a power of two, we can
turn the division into a cheaper multiplication. This function sees if we can
get an exact multiplicative inverse for a divisor and returns it if possible.
This is the hard part of PR9587.
I tested many inputs against llvm-gcc's frotend implementation of this
optimization and didn't find any difference. However, floating point is the
land of weird edge cases, so any review would be appreciated.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128545 91177308-0d34-0410-b5e6-96231b3b80d8
should be that if the phi is used by a side-effect free instruction with
no uses then the phi and the instruction now get zapped (checked by the
unittest).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126124 91177308-0d34-0410-b5e6-96231b3b80d8
of a constant had a minor typo introduced when copying it from the book, which
caused it to favor negative approximations over positive approximations in many
cases. Positive approximations require fewer operations beyond the multiplication.
In the case of division by 3, we still generate code that is a single instruction
larger than GCC's code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126097 91177308-0d34-0410-b5e6-96231b3b80d8
test for that. With this change, test/CodeGen/X86/codegen-dce.ll no longer finds
any instructions to DCE, so delete the test.
Also renamed J and JP to I and IP in RecursivelyDeleteDeadPHINode.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126088 91177308-0d34-0410-b5e6-96231b3b80d8
may be useful to understand "none", this is not the place for it. Tweak
the fix to Normalize while there: the fix added in 123990 works correctly,
but I like this way better. Finally, now that Triple understands some
non-trivial environment values, teach the unittests about them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@124720 91177308-0d34-0410-b5e6-96231b3b80d8
Add a unnamed_addr bit to global variables and functions. This will be used
to indicate that the address is not significant and therefore the constant
or function can be merged with others.
If an optimization pass can show that an address is not used, it can set this.
Examples of things that can have this set by the FE are globals created to
hold string literals and C++ constructors.
Adding unnamed_addr to a non-const global should have no effect unless
an optimization can transform that global into a constant.
Aliases are not allowed to have unnamed_addr since I couldn't figure
out any use for it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123063 91177308-0d34-0410-b5e6-96231b3b80d8
This implementation already exists as ConnectedVNInfoEqClasses in
LiveInterval.cpp, and it seems to be generally useful to have a light-weight way
of forming equivalence classes of small integers.
IntEqClasses doesn't allow enumeration of the elements in a class.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122293 91177308-0d34-0410-b5e6-96231b3b80d8
moves the iterator to end(), and it is valid to call it on end().
That means it is valid to call advanceTo() with any monotonic key sequence.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122092 91177308-0d34-0410-b5e6-96231b3b80d8
zextOrTrunc(), and APSInt methods extend(), extOrTrunc() and new method
trunc(), to be const and to return a new value instead of modifying the
object in place.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121120 91177308-0d34-0410-b5e6-96231b3b80d8
namespace. None of them return anything except for success anyway. These will be
converted to returning their result soon.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121109 91177308-0d34-0410-b5e6-96231b3b80d8
editing of the current interval.
These methods may cause coalescing, there are corresponding set*Unchecked
methods for editing without coalescing. The non-coalescing methods are useful
for applying monotonic transforms to all keys or values in a map without
accidentally coalescing transformed and untransformed intervals.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@120829 91177308-0d34-0410-b5e6-96231b3b80d8
We always disallowed overlapping inserts with different values, and this makes
the insertion code smaller and faster.
If an overwriting insert is needed, it can be added as a separate method that
trims any existing intervals before inserting. The immediate use cases for
IntervalMap don't need this - they only use disjoint insertions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@120264 91177308-0d34-0410-b5e6-96231b3b80d8
These iterators don't point anywhere, and they can't be compared to anything.
They are only good for assigning to.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@120239 91177308-0d34-0410-b5e6-96231b3b80d8
Implement iterator::erase() in a simple version that erases nodes when they
become empty, but doesn't try to redistribute elements among siblings for better
packing.
Handle coalescing across leaf nodes which may require erasing entries.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@120226 91177308-0d34-0410-b5e6-96231b3b80d8
GNU ld/PECOFF accepts but ignores them below;
--version-script
--export-dynamic
--rpath
FIXME: autoconf should be aware of them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@120179 91177308-0d34-0410-b5e6-96231b3b80d8
to use lowercase letters for the start of most
method names and to replace some method names
with more descriptive names (e.g., "getLeft()"
instead of "Left()"). No real functionality
change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@120070 91177308-0d34-0410-b5e6-96231b3b80d8
This is a sorted interval map data structure for small keys and values with
automatic coalescing and bidirectional iteration over coalesced intervals.
Except for coalescing intervals, it provides similar functionality to std::map.
It is however much more compact for small keys and values, and hopefully faster
too.
The container object itself can hold the first few intervals without any
allocations, then it switches to a cache conscious B+-tree representation. A
recycling allocator can be shared between many containers, even between
containers holding different types.
The IntervalMap is initially intended to be used with SlotIndex intervals for:
- Backing store for LiveIntervalUnion that is smaller and faster than std::set.
- Backing store for LiveInterval with less overhead than std::vector for typical
intervals and O(N log N) merging of large intervals. 99% of virtual registers
need 4 entries or less and would benefit from the small object optimization.
- Backing store for LiveDebugVariable which doesn't exist yet, but will track
debug variables during register allocation.
This is a work in progress. Missing items are:
- Performance metrics.
- erase().
- insert() shrinkage.
- clear().
- More performance metrics.
- Simplification and detemplatization.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119787 91177308-0d34-0410-b5e6-96231b3b80d8
This is a sorted interval map data structure for small keys and values with
automatic coalescing and bidirectional iteration over coalesced intervals.
Except for coalescing intervals, it provides similar functionality to std::map.
It is however much more compact for small keys and values, and hopefully faster
too.
The container object itself can hold the first few intervals without any
allocations, then it switches to a cache conscious B+-tree representation. A
recycling allocator can be shared between many containers, even between
containers holding different types.
The IntervalMap is initially intended to be used with SlotIndex intervals for:
- Backing store for LiveIntervalUnion that is smaller and faster than std::set.
- Backing store for LiveInterval with less overhead than std::vector for typical
intervals and O(N log N) merging of large intervals. 99% of virtual registers
need 4 entries or less and would benefit from the small object optimization.
- Backing store for LiveDebugVariable which doesn't exist yet, but will track
debug variables during register allocation.
This is a work in progress. Missing items are:
- Performance metrics.
- erase().
- insert() shrinkage.
- clear().
- More performance metrics.
- Simplification and detemplatization.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119772 91177308-0d34-0410-b5e6-96231b3b80d8
must be called in the pass's constructor. This function uses static dependency declarations to recursively initialize
the pass's dependencies.
Clients that only create passes through the createFooPass() APIs will require no changes. Clients that want to use the
CommandLine options for passes will need to manually call the appropriate initialization functions in PassInitialization.h
before parsing commandline arguments.
I have tested this with all standard configurations of clang and llvm-gcc on Darwin. It is possible that there are problems
with the static dependencies that will only be visible with non-standard options. If you encounter any crash in pass
registration/creation, please send the testcase to me directly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@116820 91177308-0d34-0410-b5e6-96231b3b80d8
available targets unless LLVM_INCLUDE_X is ON. LLVM_BUILD_X implies
LLVM_INCLUDE_X"
It breaks the configuration phase when cmake is invoked without
parameters, it is too complex for the purpose and introduces an
incovenience for the user (as both LLVM_BUILD_X and LLVM_INCLUDE_X
must set to OFF for not including X on the build)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@114795 91177308-0d34-0410-b5e6-96231b3b80d8
Fix zeroExtend and signExtend to support empty sets, and to return the smallest
possible result set which contains the extension of each element in their
inputs. For example zext i8 [100, 10) to i16 is now [0, 256), not i16 [100, 10)
which contains 63446 members.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@113187 91177308-0d34-0410-b5e6-96231b3b80d8
target triple and straightens it out. This does less than gcc's script
config.sub, for example it turns i386-mingw32 into i386--mingw32 not
i386-pc-mingw32, but it does a decent job of turning funky triples into
something that the rest of the Triple class can understand. The plan
is to use this to canonicalize triple's when they are first provided
by users, and have the rest of LLVM only deal with canonical triples.
Once this is done the special case workarounds in the Triple constructor
can be removed, making the class more regular and easier to use. The
comments and unittests for the Triple class are already adjusted in this
patch appropriately for this brave new world of increased uniformity.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@110909 91177308-0d34-0410-b5e6-96231b3b80d8
- remove ashr which never worked.
- fix lshr and shl and add tests.
- remove dead function "intersect1Wrapped".
- add a new sub method to subtract ranges, with test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@110861 91177308-0d34-0410-b5e6-96231b3b80d8
of Value deletions and RAUWs, instead of relying on ScalarEvolution's
Scalars map being notified, as that's complicated at best, and
insufficient in general.
This means SCEVUnknown needs a non-trivial destructor, so introduce
a mechanism to allow ScalarEvolution to locate all the SCEVUnknowns.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@110086 91177308-0d34-0410-b5e6-96231b3b80d8
handles with a pointer to the containing map. When a map is copied, these
pointers need to be corrected to point to the new map. If not, then consider
the case of a map M1 which maps a value V to something. Create a copy M2 of
M1. At this point there are two value handles on V, one representing V as a
key in M1, the other representing V as a key in M2. But both value handles
point to M1 as the containing map. Now delete V. The value handles remove
themselves from their containing map (which destroys them), but only the first
value handle is successful: the second one cannot remove itself from M1 as
(once the first one has removed itself) there is nothing there to remove; it
is therefore not destroyed. This causes an assertion failure "All references
to V were not removed?".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@109851 91177308-0d34-0410-b5e6-96231b3b80d8
extend it to handle the case where multiple RAUWs affect a single
SCEVUnknown.
Add a ScalarEvolution unittest to test for this situation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@109705 91177308-0d34-0410-b5e6-96231b3b80d8
rip out the implementation of X86InstrInfo::GetInstSizeInBytes.
The code being ripped out just implemented a copy and hacked up
version of the (old) instruction encoder, and is buggy and
terrible in other ways. Since "GetInstSizeInBytes" is really
only there to support the JIT's "NeedsExactSize" hook (which
noone is using), just rip out the code. I will rip out the
NeedsExactSize hook next.
This resolves rdar://7617809 - switch X86InstrInfo::GetInstSizeInBytes to use X86MCCodeEmitter
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@109149 91177308-0d34-0410-b5e6-96231b3b80d8
this is still minimal on purpose, but I plan to migrate the ugly
hack under #ifdef DEBUG_CAST_OPERATORS into this file
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108849 91177308-0d34-0410-b5e6-96231b3b80d8
EXPECT_{TRUE,FALSE}(...) macros. This also prevents suprious warnings about
bool-to-pointer conversion that occurs withit EXPECT_EQ.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108248 91177308-0d34-0410-b5e6-96231b3b80d8
- This can give substantial speedups in the delta process for inputs we can construct dependency information for.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105612 91177308-0d34-0410-b5e6-96231b3b80d8
This means that our Registers are now ordered R7, R8, R9, R10, R12, ...
Not R1, R10, R11, R12, R2, R3, ...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@104745 91177308-0d34-0410-b5e6-96231b3b80d8
- This provides a convenient alternative to using something llvm::prior or
manual iterator access, for example::
if (T *Prev = foo->getPrevNode())
...
instead of::
iterator it(foo);
if (it != begin()) {
--it;
...
}
- Chris, please review.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@103647 91177308-0d34-0410-b5e6-96231b3b80d8
to CallGraphSCCPass's instead of passing around a
std::vector<CallGraphNode*>. No functionality change,
but now we have a much tidier interface.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@101558 91177308-0d34-0410-b5e6-96231b3b80d8
adjusted unittest
I have added some doxygen to OptionalOperandTraits,
so hopefully there will be no confusion in the future.
Incidentally OptionalOperandTraits is not used any more (IIUC),
but the obvious client would be BranchInstr, and I plan
to rearrange it that way.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@98624 91177308-0d34-0410-b5e6-96231b3b80d8
just count references to it from JIT output to decide when to destroy it. This
patch waits to destroy the JIT's memory of a stub until the Function it refers
to is destroyed. External function stubs and GVIndirectSyms aren't destroyed
until the JIT itself is.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97737 91177308-0d34-0410-b5e6-96231b3b80d8
payloads. APFloat's internal folding routines always make QNaNs now,
instead of sometimes making QNaNs and sometimes SNaNs depending on the
type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97364 91177308-0d34-0410-b5e6-96231b3b80d8
--enable-shared configure flag to have the tools linked shared. (2.7svn is just
$(LLVMVersion) so it'll change to "2.7" in the release.) Always link the
example programs shared to test that the shared library keeps working.
On my mac laptop, Debug libLLVM2.7svn.dylib is 39MB, and opt (for example) is
16M static vs 440K shared.
Two things are less than ideal here:
1) The library doesn't include any version information. Since we expect to break
the ABI with every release, this shouldn't be much of a problem. If we do
release a compatible 2.7.1, we may be able to hack its library to work with
binaries compiled against 2.7.0, or we can just ask them to recompile. I'm
hoping to get a real packaging expert to look at this for the 2.8 release.
2) llvm-config doesn't yet have an option to print link options for the shared
library. I'll add this as a subsequent patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@96559 91177308-0d34-0410-b5e6-96231b3b80d8
the global TheJIT and TheJITResolver variables. Lazy compilation is supported
by a global map from a stub address to the JITResolver that knows how to
compile it.
Patch by Olivier Meurant!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@95837 91177308-0d34-0410-b5e6-96231b3b80d8
It fails with a release build only, for reasons
as yet unknown. (If there's a better way to Xfail
things here let me know, doesn't seem to be any
prior art in unittests.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@95700 91177308-0d34-0410-b5e6-96231b3b80d8
Modules and ModuleProviders. Because the "ModuleProvider" simply materializes
GlobalValues now, and doesn't provide modules, it's renamed to
"GVMaterializer". Code that used to need a ModuleProvider to materialize
Functions can now materialize the Functions directly. Functions no longer use a
magic linkage to record that they're materializable; they simply ask the
GVMaterializer.
Because the C ABI must never change, we can't remove LLVMModuleProviderRef or
the functions that refer to it. Instead, because Module now exposes the same
functionality ModuleProvider used to, we store a Module* in any
LLVMModuleProviderRef and translate in the wrapper methods. The bindings to
other languages still use the ModuleProvider concept. It would probably be
worth some time to update them to follow the C++ more closely, but I don't
intend to do it.
Fixes http://llvm.org/PR5737 and http://llvm.org/PR5735.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@94686 91177308-0d34-0410-b5e6-96231b3b80d8
TimeValue()::now().toEpochTime() is supposed to be the same as time(),
but it wasn't, because toEpoch subtracted PosixZeroTime, but now()
didn't add PosixZeroTime!
Add a unittest to check this works.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@94178 91177308-0d34-0410-b5e6-96231b3b80d8
missing ones are libsupport, libsystem and libvmcore. libvmcore is
currently blocked on bugpoint, which uses EH. Once it stops using
EH, we can switch it off.
This #if 0's out 3 unit tests, because gtest requires RTTI information.
Suggestions welcome on how to fix this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@94164 91177308-0d34-0410-b5e6-96231b3b80d8
a single pointer (PointerIntPair) member. In "small" mode, the
pointer field is reinterpreted as a set of bits. In "large" mode,
the pointer points to a heap-allocated object.
Also, give BitVector empty and swap functions.
And, add some simple unittests for BitVector and SmallBitVector.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@92730 91177308-0d34-0410-b5e6-96231b3b80d8
will be found by argument-dependent lookup. As with the previous
commit, GCC is allowing ill-formed code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@92146 91177308-0d34-0410-b5e6-96231b3b80d8
argument-dependent lookup can find it. This is another case where an
LLVM bug (not making operator<< visible) was masked by a GCC bug
(looking in the global namespace when it shouldn't).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@92144 91177308-0d34-0410-b5e6-96231b3b80d8
smallest-normalized-magnitude values in a given FP semantics.
Provide an APFloat-to-string conversion which I am quite ready to admit could
be much more efficient.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@92126 91177308-0d34-0410-b5e6-96231b3b80d8
they're available_externally broke VMKit, which was relying on the fact that
functions would only be materialized when they were first called. We'll have
to wait for http://llvm.org/PR5737 to really fix this.
I also added a test for one of the F->isDeclaration() calls which wasn't
covered by anything else in the test suite.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@91943 91177308-0d34-0410-b5e6-96231b3b80d8
argument to runJITOnFunction(), which caused a null pointer dereference at
every call.
Patch by Gianluca Guida!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@91939 91177308-0d34-0410-b5e6-96231b3b80d8
nlewycky's fix to add -rdynamic so the JIT can look symbols up in Linux builds
of the JITTests binary.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@91250 91177308-0d34-0410-b5e6-96231b3b80d8
- This is a pretty slow / memory intensive implementation, and I will likely
change it to an iterative model, but it works.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@90447 91177308-0d34-0410-b5e6-96231b3b80d8
way for each TargetJITInfo subclass to allocate its own stubs. This
means stubs aren't as exactly-sized anymore, but it lets us get rid of
TargetJITInfo::emitFunctionStubAtAddr(), which lets ARM and PPC
support the eager JIT, fixing http://llvm.org/PR4816.
* Rename the JITEmitter's stub creation functions to describe the kind
of stub they create. So far, all of them create lazy-compilation
stubs, but they sometimes get used when far-call stubs are needed.
Fixing http://llvm.org/PR5201 will involve fixing this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89715 91177308-0d34-0410-b5e6-96231b3b80d8
address space (though it only uses a small fraction of that), and the
buildbots disallow that.
Also add a comment to the Makefile's ulimit line warning future
developers that changing it won't work.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@88994 91177308-0d34-0410-b5e6-96231b3b80d8
The large code model is documented at
http://www.x86-64.org/documentation/abi.pdf and says that calls should
assume their target doesn't live within the 32-bit pc-relative offset
that fits in the call instruction.
To do this, we turn off the global-address->target-global-address
conversion in X86TargetLowering::LowerCall(). The first attempt at
this broke the lazy JIT because it can separate the movabs(imm->reg)
from the actual call instruction. The lazy JIT receives the address of
the movabs as a relocation and needs to record the return address from
the call; and then when that call happens, it needs to patch the
movabs with the newly-compiled target. We could thread the call
instruction into the relocation and record the movabs<->call mapping
explicitly, but that seems to require at least as much new
complication in the code generator as this change.
To fix this, we make lazy functions _always_ go through a call
stub. You'd think we'd only have to force lazy calls through a stub on
difficult platforms, but that turns out to break indirect calls
through a function pointer. The right fix for that is to distinguish
between calls and address-of operations on uncompiled functions, but
that's complex enough to leave for someone else to do.
Another attempt at this defined a new CALL64i pseudo-instruction,
which expanded to a 2-instruction sequence in the assembly output and
was special-cased in the X86CodeEmitter's emitInstruction()
function. That broke indirect calls in the same way as above.
This patch also removes a hack forcing Darwin to the small code model.
Without far-call-stubs, the small code model requires things of the
JITMemoryManager that the DefaultJITMemoryManager can't provide.
Thanks to echristo for lots of testing!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@88984 91177308-0d34-0410-b5e6-96231b3b80d8
This patch forbids implicit conversion of DenseMap::const_iterator to
DenseMap::iterator which was possible because DenseMapIterator inherited
(publicly) from DenseMapConstIterator. Conversion the other way around is now
allowed as one may expect.
The template DenseMapConstIterator is removed and the template parameter
IsConst which specifies whether the iterator is constant is added to
DenseMapIterator.
Actually IsConst parameter is not necessary since the constness can be
determined from KeyT but this is not relevant to the fix and can be addressed
later.
Patch by Victor Zverovich!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86636 91177308-0d34-0410-b5e6-96231b3b80d8
