when the object is in an archive to use something like libx.a(foo.o) as part of
the error message.
Also changed llvm-objdump and llvm-size to be like llvm-nm and ignore non-object
files in archives and not produce any error message.
To do this Archive::Child::getAsBinary() was changed from ErrorOr<...> to
Expected<...> then that was threaded up to its users.
Converting this interface to Expected<> from ErrorOr<> does involve
touching a number of places. To contain the changes for now the use of
errorToErrorCode() is still used in one place yet to be fully converted.
Again there some were bugs in the existing code that did not deal with the
old ErrorOr<> return values. So now with Expected<> since they must be
checked and the error handled, I added a TODO and a comments for those.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@269784 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This code is intended to be used as part of LLD's PDB writing. Until
that exists, this is exposed via llvm-readobj for testing purposes.
Type stream merging uses the following algorithm:
- Begin with a new empty stream, and a new empty hash table that maps
from type record contents to new type index.
- For each new type stream, maintain a map from source type index to
destination type index.
- For each record, copy it and rewrite its type indices to be valid in
the destination type stream.
- If the new type record is not already present in the destination
stream hash table, append it to the destination type stream, assign it
the next type index, and update the two hash tables.
- If the type record already exists in the destination stream, discard
it and update the type index map to forward the source type index to
the existing destination type index.
Reviewers: zturner, ruiu
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D20122
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@269521 91177308-0d34-0410-b5e6-96231b3b80d8
Dynamic table when printed shows uppercase tag/values.
This changes it to lower case when printing in GNU style
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@269368 91177308-0d34-0410-b5e6-96231b3b80d8
This introduces a variadic template and some helper macros to
safely and correctly deserialize many types of common record
fields while maintaining error checking.
Differential Revision: http://reviews.llvm.org/D20183
Reviewed By: rnk, amccarth
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@269315 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Port the dumper in llvm-readobj over to it.
I'm planning to use this visitor to power type stream merging.
While we're at it, try to switch from StringRef to ArrayRef<uint8_t> in some
places.
Reviewers: zturner, amccarth
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D19899
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@268535 91177308-0d34-0410-b5e6-96231b3b80d8
.MIPS.options section specifies miscellaneous options to be applied
to an object file. LLVM as well as modern versions of GNU tools emit
the only type of the options - ODK_REGINFO. The patch teaches llvm-readobj
to print details of the ODK_REGINFO and skip contents of other options.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@268478 91177308-0d34-0410-b5e6-96231b3b80d8
Ability to parse codeview type streams is also needed by
DebugInfoPDB for parsing PDBs, so moving this into a library
gives us this option. Since DebugInfoPDB had already hand
rolled some code to do this, that code is now convereted over
to using this common abstraction.
Differential Revision: http://reviews.llvm.org/D19887
Reviewed By: dblaikie, amccarth
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@268454 91177308-0d34-0410-b5e6-96231b3b80d8
We wish to re-use this from llvm-pdbdump, and it provides a nice
way to print structured data in scoped format that could prove
useful for many other dumping tools as well. Moving to support
and changing name to ScopedPrinter to better reflect its purpose.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@268342 91177308-0d34-0410-b5e6-96231b3b80d8
This is a small refactoring step toward moving CodeView type stream logic from llvm-readobj to a library. It abstracts the logic of stepping through the stream into an iterator class and updates llvm-readobj to use that iterator. This has no functional change; llvm-readobj produces identical output.
The next step is to abstract the parsing of the different leaf types and then move that and the iterator into a library.
Since this is my first contrib outside LLDB, please let me know if I'm messing up on any of the LLVM style guidelines, idioms, or patterns.
Differential Revision: http://reviews.llvm.org/D19746
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@268334 91177308-0d34-0410-b5e6-96231b3b80d8
This isolates the state we use for type dumping from the knowledge of
object files. We can use CVTypeDumper to dump types from anywhere in
memory now.
NFC
Reviewers: zturner
Differential Revision: http://reviews.llvm.org/D19824
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@268300 91177308-0d34-0410-b5e6-96231b3b80d8
Produce another specific error message for a malformed Mach-O file when a symbol’s
section index is more than the number of sections. The existing test case in test/Object/macho-invalid.test
for macho-invalid-section-index-getSectionRawName now reports the error with the message indicating
that a symbol at a specific index has a bad section index and that bad section index value.
Again converting interfaces to Expected<> from ErrorOr<> does involve
touching a number of places. Where the existing code reported the error with a
string message or an error code it was converted to do the same.
Also there some were bugs in the existing code that did not deal with the
old ErrorOr<> return values. So now with Expected<> since they must be
checked and the error handled, I added a TODO and a comment:
"// TODO: Actually report errors helpfully" and a call something like
consumeError(NameOrErr.takeError()) so the buggy code will not crash
since needed to deal with the Error.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@268298 91177308-0d34-0410-b5e6-96231b3b80d8
Produce another specific error message for a malformed Mach-O file when a symbol’s
string index is past the end of the string table. The existing test case in test/Object/macho-invalid.test
for macho-invalid-symbol-name-past-eof now reports the error with the message indicating
that a symbol at a specific index has a bad sting index and that bad string index value.
Again converting interfaces to Expected<> from ErrorOr<> does involve
touching a number of places. Where the existing code reported the error with a
string message or an error code it was converted to do the same. There is some
code for this that could be factored into a routine but I would like to leave that for
the code owners post-commit to do as they want for handling an llvm::Error. An
example of how this could be done is shown in the diff in
lib/ExecutionEngine/RuntimeDyld/RuntimeDyldImpl.h which had a Check() routine
already for std::error_code so I added one like it for llvm::Error .
Also there some were bugs in the existing code that did not deal with the
old ErrorOr<> return values. So now with Expected<> since they must be
checked and the error handled, I added a TODO and a comment:
“// TODO: Actually report errors helpfully” and a call something like
consumeError(NameOrErr.takeError()) so the buggy code will not crash
since needed to deal with the Error.
Note there fixes needed to lld that goes along with this that I will commit right after this.
So expect lld not to built after this commit and before the next one.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@266919 91177308-0d34-0410-b5e6-96231b3b80d8
Produce the first specific error message for a malformed Mach-O file describing
the problem instead of the generic message for object_error::parse_failed of
"Invalid data was encountered while parsing the file”. Many more good error
messages will follow after this first one.
This is built on Lang Hames’ great work of adding the ’Error' class for
structured error handling and threading Error through MachOObjectFile
construction. And making createMachOObjectFile return Expected<...> .
So to to get the error to the llvm-obdump tool, I changed the stack of
these methods to also return Expected<...> :
object::ObjectFile::createObjectFile()
object::SymbolicFile::createSymbolicFile()
object::createBinary()
Then finally in ParseInputMachO() in MachODump.cpp the error can
be reported and the specific error message can be printed in llvm-objdump
and can be seen in the existing test case for the existing malformed binary
but with the updated error message.
Converting these interfaces to Expected<> from ErrorOr<> does involve
touching a number of places. To contain the changes for now use of
errorToErrorCode() and errorOrToExpected() are used where the callers
are yet to be converted.
Also there some were bugs in the existing code that did not deal with the
old ErrorOr<> return values. So now with Expected<> since they must be
checked and the error handled, I added a TODO and a comment:
“// TODO: Actually report errors helpfully” and a call something like
consumeError(ObjOrErr.takeError()) so the buggy code will not crash
since needed to deal with the Error.
Note there is one fix also needed to lld/COFF/InputFiles.cpp that goes along
with this that I will commit right after this. So expect lld not to built
after this commit and before the next one.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@265606 91177308-0d34-0410-b5e6-96231b3b80d8
in the test suite. While this is not really an interesting tool and option to run
on a Mach-O file to show the symbol table in a generic libObject format
it shouldn’t crash.
The reason for the crash was in MachOObjectFile::getSymbolType() when it was
calling MachOObjectFile::getSymbolSection() without checking its return value
for the error case.
What makes this fix require a fair bit of diffs is that the method getSymbolType() is
in the class ObjectFile defined without an ErrorOr<> so I needed to add that all
the sub classes. And all of the uses needed to be updated and the return value
needed to be checked for the error case.
The MachOObjectFile version of getSymbolType() “can” get an error in trying to
come up with the libObject’s internal SymbolRef::Type when the Mach-O symbol
symbol type is an N_SECT type because the code is trying to select from the
SymbolRef::ST_Data or SymbolRef::ST_Function values for the SymbolRef::Type.
And it needs the Mach-O section to use isData() and isBSS to determine if
it will return SymbolRef::ST_Data.
One other possible fix I considered is to simply return SymbolRef::ST_Other
when MachOObjectFile::getSymbolSection() returned an error. But since in
the past when I did such changes that “ate an error in the libObject code” I
was asked instead to push the error out of the libObject code I chose not
to implement the fix this way.
As currently written both the COFF and ELF versions of getSymbolType()
can’t get an error. But if isReservedSectionNumber() wanted to check for
the two known negative values rather than allowing all negative values or
the code wanted to add the same check as in getSymbolAddress() to use
getSection() and check for the error then these versions of getSymbolType()
could return errors.
At the end of the day the error printed now is the generic “Invalid data was
encountered while parsing the file” for object_error::parse_failed. In the
future when we thread Lang’s new TypedError for recoverable error handling
though libObject this will improve. And where the added // Diagnostic(…
comment is, it would be changed to produce and error message
like “bad section index (42) for symbol at index 8” for this case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@264187 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds support for the MachO .alt_entry assembly directive, and uses
it for global aliases with non-zero GEP offsets. The alt_entry flag indicates
that a symbol should be layed out immediately after the preceding symbol.
Conceptually it introduces an alternate entry point for a function or data
structure. E.g.:
safe_foo:
// check preconditions for foo
.alt_entry fast_foo
fast_foo:
// body of foo, can assume preconditions.
The .alt_entry flag is also implicitly set on assembly aliases of the form:
a = b + C
where C is a non-zero constant, since these have the same effect as an
alt_entry symbol: they introduce a label that cannot be moved relative to the
preceding one. Setting the alt_entry flag on aliases of this form fixes
http://llvm.org/PR25381.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@263521 91177308-0d34-0410-b5e6-96231b3b80d8
The dynamic table is also an array of a fixed structure, so it can be
represented with a DynReginoInfo.
No major functionality change. The extra error checking is covered by
existing tests with a broken dynamic program header.
Idea extracted from r260488. I did the extra cleanups.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@261107 91177308-0d34-0410-b5e6-96231b3b80d8
We used to keep both a section and a pointer to the first symbol.
The oddity of keeping a section for dynamic symbols is because there is
a DT_SYMTAB but no DT_SYMTABZ, so to print the table we have to find the
size via a section table.
The reason for still keeping a pointer to the first symbol is because we
want to be able to print relocation tables even if the section table is
missing (it is mandatory only for files used in linking).
With this patch we keep just a DynRegionInfo. This then requires
changing a few places that were asking for a Elf_Shdr but actually just
needed the first symbol.
The test change is to delete the program header pointer.
Now that we use the information of both DT_SYMTAB and .dynsym, we don't
depend on the sh_entsize of .dynsym if we see DT_SYMTAB.
Note: It is questionable if it is worth it putting the effort to report
broken sh_entsize given that in files with no section table we have to
assume it is sizeof(Elf_Sym), but that is for another change.
Extracted from r260488.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@261099 91177308-0d34-0410-b5e6-96231b3b80d8
Original commit message:
[readobj] Dump DT_JMPREL relocations when outputting dynamic relocations.
The bits of r260488 it depends on have been committed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@260970 91177308-0d34-0410-b5e6-96231b3b80d8
This requires making an error message a bit more generic, but that seems
a reasonable tradeoff.
Extracted from r260488 but simplified a bit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@260967 91177308-0d34-0410-b5e6-96231b3b80d8
