LiveDebugVariables unconditionally propagates all DBG_VALUE down the
dominator tree, which happens to work fine if there already is another
DBG_VALUE or the DBG_VALUE happends to describe a single-assignment vreg
but is otherwise wrong if the DBG_VALUE is coming from only one of the
predecessors.
In r255759 we introduced a proper data flow analysis scheduled after
LiveDebugVariables that correctly propagates DBG_VALUEs across basic block
boundaries. With the new pass in place, the incorrect propagation in
LiveDebugVariables can be retired witout loosing any of the benefits
where LiveDebugVariables happened to do the right thing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@256188 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
First up is instcombine, where in the dbg.declare -> dbg.value conversion,
the llvm.dbg.value needs to be called on the actual loaded value, rather
than the address (since the whole point of this transformation is to be
able to get rid of the alloca). Further, now that that's cleaned up, we
can remove a hack in the backend, that would add an implicit OP_deref if
the argument to dbg.value was an alloca. This stems from before the
existence of DIExpression and is no longer necessary since the deref can
be expressed explicitly.
Now, in order to make sure that the tests pass with this change, we need to
correct the printing of DEBUG_VALUE comments to take into account the
expression, which wasn't taken into account before.
Unfortunately, for both these changes, there were a number of incorrect
test cases (mostly the wrong number of DW_OP_derefs, but also a couple
where the test itself was broken more badly). aprantl and I have gone
through and adjusted these test case in order to make them pass with
these fixes and in some cases to make sure they're actually testing
what they are meant to test.
Reviewers: aprantl
Subscribers: dsanders
Differential Revision: http://reviews.llvm.org/D14186
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@256077 91177308-0d34-0410-b5e6-96231b3b80d8
SDAG currently can emit debug location for function parameters when
an llvm.dbg.declare points to either a function argument SSA temp,
or to an AllocaInst. This change extends this logic by adding a
fallback case when neither of the above is true.
This is required for SafeStack, which may copy the contents of a
byval function argument into something that is not an alloca, and
then describe the target as the new location of the said argument.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@254352 91177308-0d34-0410-b5e6-96231b3b80d8
Note, this was reviewed (and more details are in) http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151109/312083.html
These intrinsics currently have an explicit alignment argument which is
required to be a constant integer. It represents the alignment of the
source and dest, and so must be the minimum of those.
This change allows source and dest to each have their own alignments
by using the alignment attribute on their arguments. The alignment
argument itself is removed.
There are a few places in the code for which the code needs to be
checked by an expert as to whether using only src/dest alignment is
safe. For those places, they currently take the minimum of src/dest
alignments which matches the current behaviour.
For example, code which used to read:
call void @llvm.memcpy.p0i8.p0i8.i32(i8* %dest, i8* %src, i32 500, i32 8, i1 false)
will now read:
call void @llvm.memcpy.p0i8.p0i8.i32(i8* align 8 %dest, i8* align 8 %src, i32 500, i1 false)
For out of tree owners, I was able to strip alignment from calls using sed by replacing:
(call.*llvm\.memset.*)i32\ [0-9]*\,\ i1 false\)
with:
$1i1 false)
and similarly for memmove and memcpy.
I then added back in alignment to test cases which needed it.
A similar commit will be made to clang which actually has many differences in alignment as now
IRBuilder can generate different source/dest alignments on calls.
In IRBuilder itself, a new argument was added. Instead of calling:
CreateMemCpy(Dst, Src, getInt64(Size), DstAlign, /* isVolatile */ false)
you now call
CreateMemCpy(Dst, Src, getInt64(Size), DstAlign, SrcAlign, /* isVolatile */ false)
There is a temporary class (IntegerAlignment) which takes the source alignment and rejects
implicit conversion from bool. This is to prevent isVolatile here from passing its default
parameter to the source alignment.
Note, changes in future can now be made to codegen. I didn't change anything here, but this
change should enable better memcpy code sequences.
Reviewed by Hal Finkel.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@253511 91177308-0d34-0410-b5e6-96231b3b80d8
If a section is rw, it is irrelevant if the dynamic linker will write to
it or not.
It looks like llvm implemented this because gcc was doing it. It looks
like gcc implemented this in the hope that it would put all the
relocated items close together and speed up the dynamic linker.
There are two problem with this:
* It doesn't work. Both bfd and gold will map .data.rel to .data and
concatenate the input sections in the order they are seen.
* If we want a feature like that, it can be implemented directly in the
linker since it knowns where the dynamic relocations are.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@253436 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: Since we're passing references to dbg.value as pointers,
we need to have the frontend properly declare their sizes and
alignments (as it already does for regular pointers) in preparation
for my upcoming patch to have the verifer check that the sizes agree.
Also augment the backend logic that skips actually emitting this
information into DWARF such that it also handles reference types.
Reviewers: aprantl, dexonsmith, dblaikie
Subscribers: dblaikie, llvm-commits
Differential Revision: http://reviews.llvm.org/D14275
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@253186 91177308-0d34-0410-b5e6-96231b3b80d8
This is a recommit of 252842 which was reverted in 252859. The issue was
using %s format specifier for a StringRef - used Format's
left_justify(StringRef, int) instead.
It'd be nice to have __attribute__((format(..))) on llvm::format, but
apparently it's only implemented for c-style variadics, not C++ variadic
templates. Perhaps we could fix that & conditionalize the attribute on
such...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@253065 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch overrides TargetFrameLowering::getFrameIndexReference() in order to
specify the correct register when the function needs dynamic stack realignment.
The values returned from this function are used in order to create DW_AT_locations
for DWARF info. These locations would use the wrong registers as it's been
reported in PR25028.
Reviewers: dsanders
Subscribers: dean, llvm-commits
Differential Revision: http://reviews.llvm.org/D13511
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@252882 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: Inlined callsites need to be emitted in debug info so that sample profile can be annotated to the correct inlined instance.
Reviewers: dnovillo, dblaikie
Subscribers: dblaikie, llvm-commits
Differential Revision: http://reviews.llvm.org/D14511
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@252768 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, subprograms contained a metadata reference to the function they
described. Because most clients need to get or set a subprogram for a given
function rather than the other way around, this created unneeded inefficiency.
For example, many passes needed to call the function llvm::makeSubprogramMap()
to build a mapping from functions to subprograms, and the IR linker needed to
fix up function references in a way that caused quadratic complexity in the IR
linking phase of LTO.
This change reverses the direction of the edge by storing the subprogram as
function-level metadata and removing DISubprogram's function field.
Since this is an IR change, a bitcode upgrade has been provided.
Fixes PR23367. An upgrade script for textual IR for out-of-tree clients is
attached to the PR.
Differential Revision: http://reviews.llvm.org/D14265
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@252219 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This review is related to another review request http://reviews.llvm.org/D11268, does the same and merely fixes a couple of issues with it.
D11268 is quite old and has merge conflicts against the current trunk.
This request
- rebases D11268 onto the new trunk;
- resolves the merge conflicts;
- fixes the prologue_end tests, which do not pass due to the subprogram definitions not marked as distinct.
Reviewers: echristo, rengolin, kubabrecka
Subscribers: aemerson, rengolin, jyknight, dsanders, llvm-commits, asl
Differential Revision: http://reviews.llvm.org/D14338
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@252177 91177308-0d34-0410-b5e6-96231b3b80d8
Now it's enough to just specify -functions=short without additionally
providing -use-symbol-table=false.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@251339 91177308-0d34-0410-b5e6-96231b3b80d8
On targets where f32 is not legal, we have to look through a BITCAST SDNode to
find the register that an argument is stored in when emitting debug info, or we
will not be able to emit a DW_AT_location for it.
Differential Revision: http://reviews.llvm.org/D13005
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@250056 91177308-0d34-0410-b5e6-96231b3b80d8
I knee-jerk tried to fix this in completely the wrong way - it's not an
CPU limitation, but an OS/object file type one, so moving it
into a CPU-specific classification didn't help at all.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@249562 91177308-0d34-0410-b5e6-96231b3b80d8
