StringError can be used to represent Errors that aren't recoverable based on
the error type, but that have a useful error message that can be reported to
the user or logged.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@270948 91177308-0d34-0410-b5e6-96231b3b80d8
APInt::slt was copying the LHS and RHS in to temporaries then making
them unsigned so that it could use an unsigned comparision. It did
this even on the paths which were trivial to give results for, such
as the sign bit of the LHS being set while RHS was not set.
This changes the logic to return out immediately in the trivial cases,
and use an unsigned comparison in the remaining cases. But this time,
just use the unsigned comparison directly without creating any temporaries.
This works because, for example:
true = (-2 slt -1) = (0xFE ult 0xFF)
Also added some tests explicitly for slt with APInt's larger than 64-bits
so that this new code is tested.
Using the memory for 'opt -O2 verify-uselistorder.lto.opt.bc -o opt.bc'
(see r236629 for details), this reduces the number of allocations from
26.8M to 23.9M.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@270881 91177308-0d34-0410-b5e6-96231b3b80d8
Since r268966 the modern Verifier pass defaults to stripping invalid debug info
in nonasserts builds. This patch ports this behavior back to the legacy
Verifier pass as well. The primary motivation is that the clang frontend
accepts bitcode files as input but is still using the legacy pass pipeline.
Background: The problem I'm trying to solve with this sequence of patches is
that historically we've done a really bad job at verifying debug info. We want
to be able to make the verifier stricter without having to worry about breaking
bitcode compatibility with existing producers. For example, we don't necessarily
want IR produced by an older version of clang to be rejected by an LTO link just
because of malformed debug info, and rather provide an option to strip it. Note
that merely outdated (but well-formed) debug info would continue to be
auto-upgraded in this scenario.
http://reviews.llvm.org/D20629
<rdar://problem/26448800>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@270768 91177308-0d34-0410-b5e6-96231b3b80d8
Transition InstrProf and Coverage over to the stricter Error/Expected
interface.
Changes since the initial commit:
- Fix error message printing in llvm-profdata.
- Check errors in loadTestingFormat() + annotateAllFunctions().
- Defer error handling in InstrProfIterator to InstrProfReader.
- Remove the base ProfError class to work around an MSVC ICE.
Differential Revision: http://reviews.llvm.org/D19901
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@270020 91177308-0d34-0410-b5e6-96231b3b80d8
Currently only its unit test uses it, but this will be used in a later
change to simplify some logic in the GuardWidening pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@270018 91177308-0d34-0410-b5e6-96231b3b80d8
Having an enum member named Default is quite confusing: Is it distinct
from the others?
This patch removes that member and instead uses Optional<Reloc> in
places where we have a user input that still hasn't been maped to the
default value, which is now clear has no be one of the remaining 3
options.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@269988 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Add support to control where files for a distributed backend (the
individual index files and optional imports files) are created.
This is invoked with a new thinlto-prefix-replace option in the gold
plugin and llvm-lto. If specified, expects a string of the form
"oldprefix:newprefix", and instead of generating these files in the
same directory path as the corresponding bitcode file, will use a path
formed by replacing the bitcode file's path prefix matching oldprefix
with newprefix.
Also add a new replace_path_prefix helper to Path.h in libSupport.
Depends on D19636.
Reviewers: joker.eph
Subscribers: llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D19644
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@269771 91177308-0d34-0410-b5e6-96231b3b80d8
Transition InstrProf and Coverage over to the stricter Error/Expected
interface.
Changes since the initial commit:
- Address undefined-var-template warning.
- Fix error message printing in llvm-profdata.
- Check errors in loadTestingFormat() + annotateAllFunctions().
- Defer error handling in InstrProfIterator to InstrProfReader.
Differential Revision: http://reviews.llvm.org/D19901
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@269694 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r269491. It triggers warnings with Clang, breaking
builds for -Werror users including several build bots.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@269547 91177308-0d34-0410-b5e6-96231b3b80d8
Transition InstrProf and Coverage over to the stricter Error/Expected
interface.
Changes since the initial commit:
- Fix error message printing in llvm-profdata.
- Check errors in loadTestingFormat() + annotateAllFunctions().
- Defer error handling in InstrProfIterator to InstrProfReader.
Differential Revision: http://reviews.llvm.org/D19901
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@269491 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r269388.
It caused some bots to fail, I'm reverting it until I investigate the
issue.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@269395 91177308-0d34-0410-b5e6-96231b3b80d8
a sequence of values.
It increments through the values in the half-open range: [Begin, End),
producing those values when indirecting the iterator. It should support
integers, iterators, and any other type providing these basic arithmetic
operations.
This came up in the C++ standards committee meeting, and it seemed like
a useful construct that LLVM might want as well, and I wanted to
understand how easily we could solve it. I suspect this can be used to
write simpler counting loops even in LLVM along the lines of:
for (int i : seq(0, v.size())) {
...
};
As part of this, I had to fix the lack of a proxy object returned from
the operator[] in our iterator facade.
Differential Revision: http://reviews.llvm.org/D17870
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@269390 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
...loop after the last iteration.
This is really hard to do correctly. The core problem is that we need to
model liveness through the induction PHIs from iteration to iteration in
order to get the correct results, and we need to correctly de-duplicate
the common subgraphs of instructions feeding some subset of the
induction PHIs. All of this can be driven either from a side effect at
some iteration or from the loop values used after the loop finishes.
This patch implements this by storing the forward-propagating analysis
of each instruction in a cache to recall whether it was free and whether
it has become live and thus counted toward the total unroll cost. Then,
at each sink for a value in the loop, we recursively walk back through
every value that feeds the sink, including looping back through the
iterations as needed, until we have marked the entire input graph as
live. Because we cache this, we never visit instructions more than twice
-- once when we analyze them and put them into the cache, and once when
we count their cost towards the unrolled loop. Also, because the cache
is only two bits and because we are dealing with relatively small
iteration counts, we can store all of this very densely in memory to
avoid this from becoming an excessively slow analysis.
The code here is still pretty gross. I would appreciate suggestions
about better ways to factor or split this up, I've stared too long at
the algorithmic side to really have a good sense of what the design
should probably look at.
Also, it might seem like we should do all of this bottom-up, but I think
that is a red herring. Specifically, the simplification power is *much*
greater working top-down. We can forward propagate very effectively,
even across strange and interesting recurrances around the backedge.
Because we use data to propagate, this doesn't cause a state space
explosion. Doing this level of constant folding, etc, would be very
expensive to do bottom-up because it wouldn't be until the last moment
that you could collapse everything. The current solution is essentially
a top-down simplification with a bottom-up cost accounting which seems
to get the best of both worlds. It makes the simplification incremental
and powerful while leaving everything dead until we *know* it is needed.
Finally, a core property of this approach is its *monotonicity*. At all
times, the current UnrolledCost is a conservatively low estimate. This
ensures that we will never early-exit from the analysis due to exceeding
a threshold when if we had continued, the cost would have gone back
below the threshold. These kinds of bugs can cause incredibly hard to
track down random changes to behavior.
We could use a techinque similar (but much simpler) within the inliner
as well to avoid considering speculated code in the inline cost.
Reviewers: chandlerc
Subscribers: sanjoy, mzolotukhin, llvm-commits
Differential Revision: http://reviews.llvm.org/D11758
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@269388 91177308-0d34-0410-b5e6-96231b3b80d8
Remove the ModuleLevelChanges argument, and the ability to create new
subprograms for cloned functions. The latter was added without review in
r203662, but it has no in-tree clients (all non-test callers pass false
for ModuleLevelChanges [1], so it isn't reachable outside of tests). It
also isn't clear that adding a duplicate subprogram to the compile unit is
always the right thing to do when cloning a function within a module. If
this functionality comes back it should be accompanied with a more concrete
use case.
Furthermore, all in-tree clients add the returned function to the module.
Since that's pretty much the only sensible thing you can do with the function,
just do that in CloneFunction.
[1] http://llvm-cs.pcc.me.uk/lib/Transforms/Utils/CloneFunction.cpp/rCloneFunction
Differential Revision: http://reviews.llvm.org/D18628
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@269110 91177308-0d34-0410-b5e6-96231b3b80d8
Add convenience function to create MachineModuleInfo and
MachineFunctionAnalysis passes and add them to a pass manager.
Despite factoring out some shared code in
LiveIntervalTest/LLVMTargetMachine this will be used by my upcoming llc
change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@269002 91177308-0d34-0410-b5e6-96231b3b80d8
allow the transformation to strip invalid debug info.
This patch separates the Verifier into an analysis and a transformation
pass, with the transformation pass optionally stripping malformed
debug info.
The problem I'm trying to solve with this sequence of patches is that
historically we've done a really bad job at verifying debug info. We want
to be able to make the verifier stricter without having to worry about
breaking bitcode compatibility with existing producers. For example, we
don't necessarily want IR produced by an older version of clang to be
rejected by an LTO link just because of malformed debug info, and rather
provide an option to strip it. Note that merely outdated (but well-formed)
debug info would continue to be auto-upgraded in this scenario.
http://reviews.llvm.org/D19988
rdar://problem/25818489
This reapplies r268937 without modifications.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@268966 91177308-0d34-0410-b5e6-96231b3b80d8
allow the transformation to strip invalid debug info.
This patch separates the Verifier into an analysis and a transformation
pass, with the transformation pass optionally stripping malformed
debug info.
The problem I'm trying to solve with this sequence of patches is that
historically we've done a really bad job at verifying debug info. We want
to be able to make the verifier stricter without having to worry about
breaking bitcode compatibility with existing producers. For example, we
don't necessarily want IR produced by an older version of clang to be
rejected by an LTO link just because of malformed debug info, and rather
provide an option to strip it. Note that merely outdated (but well-formed)
debug info would continue to be auto-upgraded in this scenario.
http://reviews.llvm.org/D19988
rdar://problem/25818489
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@268937 91177308-0d34-0410-b5e6-96231b3b80d8
Fix handleMove() incorrectly extending liveranges when an undef input of
a vreg was moved past the (current) end of the liverange.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@268805 91177308-0d34-0410-b5e6-96231b3b80d8
A loop pass that didn't preserve this entire set of passes wouldn't
play well with other loop passes, since these are generally a basic
requirement to do any interesting transformations to a loop.
Adds a helper to get the set of analyses a loop pass should preserve,
and checks that any loop pass we run satisfies the requirement.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@268444 91177308-0d34-0410-b5e6-96231b3b80d8
We have it for StringRef but not ArrayRef, and ArrayRef has drop_back,
so I see no reason it shouldn't have drop_front. Splitting this out of a
change that I have that will use this funcitonality.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@268434 91177308-0d34-0410-b5e6-96231b3b80d8
Check for success values in the CoverageMappingTest unit test file.
This is part of a series of patches to transition ProfileData over to
the stricter Error/Expected interface.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@268420 91177308-0d34-0410-b5e6-96231b3b80d8
Check for success values in the InstrProfTest unit test file.
This is part of a series of patches to transition ProfileData over to
the stricter Error/Expected interface.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@268402 91177308-0d34-0410-b5e6-96231b3b80d8
This re-applies r260905. It requires LiveIntervals to not require
LiveVariables which was reverted and re-applied in r267954.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@268329 91177308-0d34-0410-b5e6-96231b3b80d8
This patch fixes two somewhat related bugs in MemorySSA's caching
walker. These bugs were found because D19695 brought up the problem
that we'd have defs cached to themselves, which is incorrect.
The bugs this fixes are:
- We would sometimes skip the nearest clobber of a MemoryAccess, because
we would query our cache for a given potential clobber before
checking if the potential clobber is the clobber we're looking for.
The cache entry for the potential clobber would point to the nearest
clobber *of the potential clobber*, so if that was a cache hit, we'd
ignore the potential clobber entirely.
- There are times (sometimes in DFS, sometimes in the getClobbering...
functions) where we would insert cache entries that say a def
clobbers itself.
There's a bit of common code between the fixes for the bugs, so they
aren't split out into multiple commits.
This patch also adds a few unit tests, and refactors existing tests a
bit to reduce the duplication of setup code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@268087 91177308-0d34-0410-b5e6-96231b3b80d8
In gcc, \ escapes every character in response files. It is true that this makes
it harder to mention Windows files in rsp files, but not doing this means clang
disagrees with gcc, and also disagrees with the shell (on non-Windows) which
rsp file quoting is supposed to match. clang isn't free to choose what to do
here.
In general, the idea for response files is to take bits of your command line
and write them to a file unchanged, and have things work the same way. Since
the command line would've been interpreted by the shell, things in the rsp file
need to be subject to the same shell quoting rules.
People who want to put Windows-style paths in their response files either need
to do any of:
* escape their backslashes
* or use clang-cl which uses cl.exe/cmd.exe quoting rules
* pass --rsp-quoting=windows to clang to tell it to use
cl.exe/cmd.exe quoting rules for response files.
Fixes PR27464.
http://reviews.llvm.org/D19417
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267556 91177308-0d34-0410-b5e6-96231b3b80d8
Commit r267457 made a lot of type-substitutions threw off code formatting and
alignment. This patch should tidy those changes up.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267475 91177308-0d34-0410-b5e6-96231b3b80d8
