- Refer to options by `-option` instead of `option`
- Use `-mtriple=` instead of `-march` in the example (-march will still
target the default operating system which is usually not what you want
in a test)
- Rephrase sentence because output does not go to stdout by default (you
need -o - for that as should be expected).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@300268 91177308-0d34-0410-b5e6-96231b3b80d8
At the very least, we have CallInst::setIsNoInline() for adding the
noinline attribute to callsites, and I'm told alwaysinline seems to
work.
Thought of adding "not all attributes are guaranteed to work here". If
someone thinks that would be better (or has a better way of phrasing
that, etc.), happy to add it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@300168 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Alias analysis would like to know that
invariant.group.barrier returns pointer that mustalias,
but this can't imply that we can replace one pointer with another
Reviewers: dberlin, sanjoy
Subscribers: llvm-commits, chandlerc, hfinkel, nlewycky, amharc
Differential Revision: https://reviews.llvm.org/D31758
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@300033 91177308-0d34-0410-b5e6-96231b3b80d8
LLVM makes several assumptions about address space 0. However,
alloca is presently constrained to always return this address space.
There's no real way to avoid using alloca, so without this
there is no way to opt out of these assumptions.
The problematic assumptions include:
- That the pointer size used for the stack is the same size as
the code size pointer, which is also the maximum sized pointer.
- That 0 is an invalid, non-dereferencable pointer value.
These are problems for AMDGPU because alloca is used to
implement the private address space, which uses a 32-bit
index as the pointer value. Other pointers are 64-bit
and behave more like LLVM's notion of generic address
space. By changing the address space used for allocas,
we can change our generic pointer type to be LLVM's generic
pointer type which does have similar properties.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@299888 91177308-0d34-0410-b5e6-96231b3b80d8
GAS uses "m" as a compatibility alias for "M" (SHF_MERGE).
"o" is free, except on ia64, where it already means SHF_LINK_ORDER.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@299479 91177308-0d34-0410-b5e6-96231b3b80d8
Support for writing this module code was removed in r73220, which was well
before the LLVM 3.0 release, so we do not need to be able to understand it
for backwards compatibility.
Differential Revision: https://reviews.llvm.org/D31563
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@299370 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This document is an attempt at showing how XRay could be used to debug
latency issues with LLVM tools, and how to use the llvm-xray tool to
analyse XRay traces.
Reviewers: echristo, mehdi_amini, davide
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31493
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@299133 91177308-0d34-0410-b5e6-96231b3b80d8
-ffp-contract=fast does not currently work with LTO because it's passed as a
TargetOption to the backend rather than in the IR. This adds it to
FastMathFlags.
This is toward fixing PR25721
Differential Revision: https://reviews.llvm.org/D31164
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@298939 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This class is a list of AttributeSetNodes corresponding the function
prototype of a call or function declaration. This class used to be
called ParamAttrListPtr, then AttrListPtr, then AttributeSet. It is
typically accessed by parameter and return value index, so
"AttributeList" seems like a more intuitive name.
Rename AttributeSetImpl to AttributeListImpl to follow suit.
It's useful to rename this class so that we can rename AttributeSetNode
to AttributeSet later. AttributeSet is the set of attributes that apply
to a single function, argument, or return value.
Reviewers: sanjoy, javed.absar, chandlerc, pete
Reviewed By: pete
Subscribers: pete, jholewinski, arsenm, dschuff, mehdi_amini, jfb, nhaehnle, sbc100, void, llvm-commits
Differential Revision: https://reviews.llvm.org/D31102
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@298393 91177308-0d34-0410-b5e6-96231b3b80d8
`misc.highlighting_failure` support was added to `suppress_warnings` in that
version, and the warnings-as-errors docs build relies on it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@298277 91177308-0d34-0410-b5e6-96231b3b80d8
This is an ELF-specific thing that adds SHF_LINK_ORDER to the global's section
pointing to the metadata argument's section. The effect of that is a reverse dependency
between sections for the linker GC.
!associated does not change the behavior of global-dce. The global
may also need to be added to llvm.compiler.used.
Since SHF_LINK_ORDER is per-section, !associated effectively enables
fdata-sections for the affected globals, the same as comdats do.
Differential Revision: https://reviews.llvm.org/D29104
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@298157 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Ths "cases" support was not quite finished, is unused, and is really just debug counters.
(well, almost, debug counters are slightly more powerful, in that they can skip things at the start, too).
Note, opt-bisect itself could also be implemented as a wrapper around
debug counters, but not sure it's worth it ATM.
I'll shove it on a todo list if we think it is.
Reviewers: MatzeB, chandlerc
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30856
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@297542 91177308-0d34-0410-b5e6-96231b3b80d8
If `--enable-var-scope` is in effect, variables with names that
start with `$` are considered to be global. All other variables are
local. All local variables get undefined at the beginning of each
CHECK-LABEL block. Global variables are not affected by CHECK-LABEL.
This makes it easier to ensure that individual tests are not affected
by variables set in preceding tests.
Differential Revision: https://reviews.llvm.org/D30749
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@297396 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The purpose of coro.end intrinsic is to allow frontends to mark the cleanup and
other code that is only relevant during the initial invocation of the coroutine
and should not be present in resume and destroy parts.
In landing pads coro.end is replaced with an appropriate instruction to unwind to
caller. The handling of coro.end differs depending on whether the target is
using landingpad or WinEH exception model.
For landingpad based exception model, it is expected that frontend uses the
`coro.end`_ intrinsic as follows:
```
ehcleanup:
%InResumePart = call i1 @llvm.coro.end(i8* null, i1 true)
br i1 %InResumePart, label %eh.resume, label %cleanup.cont
cleanup.cont:
; rest of the cleanup
eh.resume:
%exn = load i8*, i8** %exn.slot, align 8
%sel = load i32, i32* %ehselector.slot, align 4
%lpad.val = insertvalue { i8*, i32 } undef, i8* %exn, 0
%lpad.val29 = insertvalue { i8*, i32 } %lpad.val, i32 %sel, 1
resume { i8*, i32 } %lpad.val29
```
The `CoroSpit` pass replaces `coro.end` with ``True`` in the resume functions,
thus leading to immediate unwind to the caller, whereas in start function it
is replaced with ``False``, thus allowing to proceed to the rest of the cleanup
code that is only needed during initial invocation of the coroutine.
For Windows Exception handling model, a frontend should attach a funclet bundle
referring to an enclosing cleanuppad as follows:
```
ehcleanup:
%tok = cleanuppad within none []
%unused = call i1 @llvm.coro.end(i8* null, i1 true) [ "funclet"(token %tok) ]
cleanupret from %tok unwind label %RestOfTheCleanup
```
The `CoroSplit` pass, if the funclet bundle is present, will insert
``cleanupret from %tok unwind to caller`` before
the `coro.end`_ intrinsic and will remove the rest of the block.
Reviewers: majnemer
Reviewed By: majnemer
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D25543
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@297223 91177308-0d34-0410-b5e6-96231b3b80d8
X86EvexToVex machine instruction pass compresses EVEX encoded instructions by replacing them with their identical VEX encoded instructions when possible.
It uses manually supported 2 large tables that map the EVEX instructions to their VEX ideticals.
This TableGen backend replaces the tables by automatically generating them.
Differential Revision: https://reviews.llvm.org/D30451
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@297127 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Update the XRay docs to mention new subcomands to the llvm-xray tool,
and details on FDR mode logging. Also list down available libraries for
use part of the LLVM distribution.
Reviewers: rSerge, pelikan, echristo, timshen, sdardis, rengolin
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D30395
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@296528 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: For SamplePGO, the profile may contain cross-module inline stacks. As we need to make sure the profile annotation happens when all the hot inline stacks are expanded, we need to pass this info to the module importer so that it can import proper functions if necessary. This patch implemented this feature by emitting cross-module targets as part of function entry metadata. In the module-summary phase, the metadata is used to build call edges that points to functions need to be imported.
Reviewers: mehdi_amini, tejohnson
Reviewed By: tejohnson
Subscribers: davidxl, llvm-commits
Differential Revision: https://reviews.llvm.org/D30053
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@296498 91177308-0d34-0410-b5e6-96231b3b80d8
fallible functions.
Some fallible functions (those returning Error or Expected<T>) may only fail
for a subset of their inputs. For example, a "safe" square root function will
succeed for all finite positive inputs:
Expected<double> safeSqrt(double d) {
if (d < 0 && !isnan(d) && !isinf(d))
return make_error<...>("Cannot sqrt -ve values, nans or infs");
return sqrt(d);
}
At a safe callsite for such a function, checking the error return value is
redundant:
if (auto ValOrErr = safeSqrt(42.0)) {
// use *ValOrErr.
} else
llvm_unreachable("safeSqrt should always succeed for +ve values");
The cantFail function wraps this check and extracts the contained value,
simplifying control flow:
double Result = cantFail(safeSqrt(42.0));
This function should be used with care: it is a programmatic error to wrap a
call with cantFail if it can in fact fail. For debug builds this will
result in llvm_unreachable being called. For release builds the behavior is
undefined.
Use of this function is likely to be rare in library code, but more common
for tool and unit-test code where inputs and mock functions may be known to be
safe.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@296384 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Fixed bunch of for loops to range based for loop
and bunch of rendundat types with auto.
Reviewers: echristo, silvas, chandlerc
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D30338
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@296251 91177308-0d34-0410-b5e6-96231b3b80d8
