This is a bit gnarly since LVI is maintaining its own cache.
I think this port could be somewhat cleaner, but I'd rather not spend
too much time on it while we still have the old pass hanging around and
limiting how much we can clean things up.
Once the old pass is gone it will be easier (less time spent) to clean
it up anyway.
This is the last dependency needed for porting JumpThreading which I'll
do in a follow-up commit (there's no printer pass for LVI or anything to
test it, so porting a pass that depends on it seems best).
I've been mostly following:
r269370 / D18834 which ported Dependence Analysis
r268601 / D19839 which ported BPI
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272593 91177308-0d34-0410-b5e6-96231b3b80d8
This used to be free, copying and moving DebugLocs became expensive
after the metadata rewrite. Passing by reference eliminates a ton of
track/untrack operations. No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272512 91177308-0d34-0410-b5e6-96231b3b80d8
The approach taken here follows r267631.
deadarghaX0r should be easy to port when the time comes to add new-PM
support to bugpoint.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272507 91177308-0d34-0410-b5e6-96231b3b80d8
Below are my super rough notes when porting. They can probably serve as
a basic guide for porting other passes to the new PM. As I port more
passes I'll expand and generalize this and make a proper
docs/HowToPortToNewPassManager.rst document. There is also missing
documentation for general concepts and API's in the new PM which will
require some documentation.
Once there is proper documentation in place we can put up a list of
passes that have to be ported and game-ify/crowdsource the rest of the
porting (at least of the middle end; the backend is still unclear).
I will however be taking personal responsibility for ensuring that the
LLD/ELF LTO pipeline is ported in a timely fashion. The remaining passes
to be ported are (do something like
`git grep "<the string in the bullet point below>"` to find the pass):
General Scalar:
[ ] Simplify the CFG
[ ] Jump Threading
[ ] MemCpy Optimization
[ ] Promote Memory to Register
[ ] MergedLoadStoreMotion
[ ] Lazy Value Information Analysis
General IPO:
[ ] Dead Argument Elimination
[ ] Deduce function attributes in RPO
Loop stuff / vectorization stuff:
[ ] Alignment from assumptions
[ ] Canonicalize natural loops
[ ] Delete dead loops
[ ] Loop Access Analysis
[ ] Loop Invariant Code Motion
[ ] Loop Vectorization
[ ] SLP Vectorizer
[ ] Unroll loops
Devirtualization / CFI:
[ ] Cross-DSO CFI
[ ] Whole program devirtualization
[ ] Lower bitset metadata
CGSCC passes:
[ ] Function Integration/Inlining
[ ] Remove unused exception handling info
[ ] Promote 'by reference' arguments to scalars
Please let me know if you are interested in working on any of the passes
in the above list (e.g. reply to the post-commit thread for this patch).
I'll probably be tackling "General Scalar" and "General IPO" first FWIW.
Steps as I port "Deduce function attributes in RPO"
---------------------------------------------------
(note: if you are doing any work based on these notes, please leave a
note in the post-commit review thread for this commit with any
improvements / suggestions / incompleteness you ran into!)
Note: "Deduce function attributes in RPO" is a module pass.
1. Do preparatory refactoring.
Do preparatory factoring. In this case all I had to do was to pull out a static helper (r272503).
(TODO: give more advice here e.g. if pass holds state or something)
2. Rename the old pass class.
llvm/lib/Transforms/IPO/FunctionAttrs.cpp
Rename class ReversePostOrderFunctionAttrs -> ReversePostOrderFunctionAttrsLegacyPass
in preparation for adding a class ReversePostOrderFunctionAttrs as the pass in the new PM.
(edit: actually wait what? The new class name will be
ReversePostOrderFunctionAttrsPass, so it doesn't conflict. So this step is
sort of useless churn).
llvm/include/llvm/InitializePasses.h
llvm/lib/LTO/LTOCodeGenerator.cpp
llvm/lib/Transforms/IPO/IPO.cpp
llvm/lib/Transforms/IPO/FunctionAttrs.cpp
Rename initializeReversePostOrderFunctionAttrsPass -> initializeReversePostOrderFunctionAttrsLegacyPassPass
(note that the "PassPass" thing falls out of `s/ReversePostOrderFunctionAttrs/ReversePostOrderFunctionAttrsLegacyPass/`)
Note that the INITIALIZE_PASS macro is what creates this identifier name, so renaming the class requires this renaming too.
Note that createReversePostOrderFunctionAttrsPass does not need to be
renamed since its name is not generated from the class name.
3. Add the new PM pass class.
In the new PM all passes need to have their
declaration in a header somewhere, so you will often need to add a header.
In this case
llvm/include/llvm/Transforms/IPO/FunctionAttrs.h is already there because
PostOrderFunctionAttrsPass was already ported.
The file-level comment from the .cpp file can be used as the file-level
comment for the new header. You may want to tweak the wording slightly
from "this file implements" to "this file provides" or similar.
Add declaration for the new PM pass in this header:
class ReversePostOrderFunctionAttrsPass
: public PassInfoMixin<ReversePostOrderFunctionAttrsPass> {
public:
PreservedAnalyses run(Module &M, AnalysisManager<Module> &AM);
};
Its name should end with `Pass` for consistency (note that this doesn't
collide with the names of most old PM passes). E.g. call it
`<name of the old PM pass>Pass`.
Also, move the doxygen comment from the old PM pass to the declaration of
this class in the header.
Also, include the declaration for the new PM class
`llvm/Transforms/IPO/FunctionAttrs.h` at the top of the file (in this case,
it was already done when the other pass in this file was ported).
Now define the `run` method for the new class.
The main things here are:
a) Use AM.getResult<...>(M) to get results instead of `getAnalysis<...>()`
b) If the old PM pass would have returned "false" (i.e. `Changed ==
false`), then you should return PreservedAnalyses::all();
c) In the old PM getAnalysisUsage method, observe the calls
`AU.addPreserved<...>();`.
In the case `Changed == true`, for each preserved analysis you should do
call `PA.preserve<...>()` on a PreservedAnalyses object and return it.
E.g.:
PreservedAnalyses PA;
PA.preserve<CallGraphAnalysis>();
return PA;
Note that calls to skipModule/skipFunction are not supported in the new PM
currently, so optnone and optimization bisect support do not work. You can
just drop those calls for now.
4. Add the pass to the new PM pass registry to make it available in opt.
In llvm/lib/Passes/PassBuilder.cpp add a #include for your header.
`#include "llvm/Transforms/IPO/FunctionAttrs.h"`
In this case there is already an include (from when
PostOrderFunctionAttrsPass was ported).
Add your pass to llvm/lib/Passes/PassRegistry.def
In this case, I added
`MODULE_PASS("rpo-functionattrs", ReversePostOrderFunctionAttrsPass())`
The string is from the `INITIALIZE_PASS*` macros used in the old pass
manager.
Then choose a test that uses the pass and use the new PM `-passes=...` to
run it.
E.g. in this case there is a test that does:
; RUN: opt < %s -basicaa -functionattrs -rpo-functionattrs -S | FileCheck %s
I have added the line:
; RUN: opt < %s -aa-pipeline=basic-aa -passes='require<targetlibinfo>,cgscc(function-attrs),rpo-functionattrs' -S | FileCheck %s
The `-aa-pipeline=basic-aa` and
`require<targetlibinfo>,cgscc(function-attrs)` are what is needed to run
functionattrs in the new PM (note that in the new PM "functionattrs"
becomes "function-attrs" for some reason). This is just pulled from
`readattrs.ll` which contains the change from when functionattrs was ported
to the new PM.
Adding rpo-functionattrs causes the pass that was just ported to run.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272505 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Make isGuaranteedToExecute use the
isGuaranteedToTransferExecutionToSuccessor helper, and make that helper
a bit more accurate.
There's a potential performance impact here from assuming that arbitrary
calls might not return. This probably has little impact on loads and
stores to a pointer because most things alias analysis can reason about
are dereferenceable anyway. The other impacts, like less aggressive
hoisting of sdiv by a variable and less aggressive hoisting around
volatile memory operations, are unlikely to matter for real code.
This also impacts SCEV, which uses the same helper. It's a minor
improvement there because we can tell that, for example, memcpy always
returns normally. Strictly speaking, it's also introducing
a bug, but it's not any worse than everywhere else we assume readonly
functions terminate.
Fixes http://llvm.org/PR27857.
Reviewers: hfinkel, reames, chandlerc, sanjoy
Subscribers: broune, llvm-commits
Differential Revision: http://reviews.llvm.org/D21167
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272489 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Dominator updation fails for a loop inserted with a new basicblock.
A block required by DT to set the IDom might not have been cloned yet. This is because there is no predefined ordering of loop blocks (except for the header block which should be the first block in the list).
The patch first creates DT nodes for the cloned blocks and then separately updates the DT in a follow-on loop.
Reviewers: anemet, dberlin
Subscribers: dberlin, llvm-commits
Differential Revision: http://reviews.llvm.org/D20899
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272479 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Iterates all (except the first and the last) operands within each GEP
instruction for instrumentation.
Adds test struct_field_gep.ll.
Reviewers: aizatsky
Subscribers: vitalybuka, zhaoqin, kcc, eugenis, bruening, llvm-commits
Differential Revision: http://reviews.llvm.org/D21242
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272442 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
I can't find a case where we can rotate a loop more than once, and it looks
like we never do this. To rotate a loop following conditions should be met:
1) its header should be exiting
2) its latch shouldn't be exiting
But after the first rotation the header becomes the new latch, so this
condition can never be true any longer.
Tested on with an assert on LNT testsuite and make check.
Reviewers: hfinkel, sanjoy
Subscribers: sebpop, sanjoy, llvm-commits, mzolotukhin
Differential Revision: http://reviews.llvm.org/D20181
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272439 91177308-0d34-0410-b5e6-96231b3b80d8
Loop unswitching may cause MSan false positive when the unswitch
condition is not guaranteed to execute.
This is very similar to ASan and TSan special case in
llvm::isSafeToSpeculativelyExecute (they don't like speculative loads
and stores), but for branch instructions.
This is a workaround for PR28054.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272421 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
We failed to unpoison uninteresting allocas on return as unpoisoning is part of
main instrumentation which skips such allocas.
Added check -asan-instrument-allocas for dynamic allocas. If instrumentation of
dynamic allocas is disabled it will not will not be unpoisoned.
PR27453
Reviewers: kcc, eugenis
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D21207
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272341 91177308-0d34-0410-b5e6-96231b3b80d8
Instead of directly using MaxFunctionCount and function entry count to determine callee hotness, use the isHotFunction/isColdFunction methods provided by ProfileSummaryInfo.
Differential revision: http://reviews.llvm.org/D21045
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272321 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, we materialized secondary vector IVs from the primary scalar IV,
by offseting the primary to match the correct start value, and then broadcasting
it - inside the loop body. Instead, we can use a real vector IV, like we do for
the primary.
This enables using vector IVs for secondary integer IVs whose type matches the
type of the primary.
Differential Revision: http://reviews.llvm.org/D20932
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272283 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This fixes PR26682. Also add LCSSA as a preserved pass to LoopSimplify,
that looks correct to me and allows to write a test for the issue.
Reviewers: chandlerc, bogner, sanjoy
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D21112
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272224 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This fixes PR27617.
Bug description: The SLPVectorizer asserts on encountering GEPs with different index types, such as i8 and i64.
The patch includes a simple relaxation of the assert to allow constants being of different types, along with a regression test that will provoke the unrelaxed assert.
Reviewers: nadav, mzolotukhin
Subscribers: JesperAntonsson, llvm-commits, mzolotukhin
Differential Revision: http://reviews.llvm.org/D20685
Patch by Jesper Antonsson!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272206 91177308-0d34-0410-b5e6-96231b3b80d8
with user specified count has been applied.
Summary:
Previously SetLoopAlreadyUnrolled() set the disable pragma only if
there was some loop metadata.
Now it set the pragma in all cases. This helps to prevent multiple
unroll when -unroll-count=N is given.
Reviewers: mzolotukhin
Differential Revision: http://reviews.llvm.org/D20765
From: Evgeny Stupachenko <evstupac@gmail.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272195 91177308-0d34-0410-b5e6-96231b3b80d8
As suggested by clang-tidy's performance-unnecessary-copy-initialization.
This can easily hit lifetime issues, so I audited every change and ran the
tests under asan, which came back clean.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272126 91177308-0d34-0410-b5e6-96231b3b80d8
Unlike native shifts, the AVX2 per-element shift instructions VPSRAV/VPSRLV/VPSLLV handle out of range shift values (logical shifts set the result to zero, arithmetic shifts splat the sign bit).
If the shift amount is constant we can sometimes convert these instructions to native shifts:
1 - if all shift amounts are in range then the conversion is trivial.
2 - out of range arithmetic shifts can be clamped to the (bitwidth - 1) (a legal shift amount) before conversion.
3 - logical shifts just return zero if all elements have out of range shift amounts.
In addition, UNDEF shift amounts are handled - either as an UNDEF shift amount in a native shift or as an UNDEF in the logical 'all out of range' zero constant special case for logical shifts.
Differential Revision: http://reviews.llvm.org/D19675
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@271996 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds support for folding undef/zero/constant inputs to MOVMSK instructions.
The SSE/AVX versions can be fully folded, but the MMX version can only handle undef inputs.
Differential Revision: http://reviews.llvm.org/D20998
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@271990 91177308-0d34-0410-b5e6-96231b3b80d8
scalarizePHI only looked for phis that have exactly two uses - the "latch"
use, and an extract. Unfortunately, we can not assume all equivalent extracts
are CSE'd, since InstCombine itself may create an extract which is a duplicate
of an existing one. This extends it to handle several distinct extracts from
the same index.
This should fix at least some of the performance regressions from PR27988.
Differential Revision: http://reviews.llvm.org/D20983
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@271961 91177308-0d34-0410-b5e6-96231b3b80d8
