If a local_unnamed_addr attribute is attached to a global, the address
is known to be insignificant within the module. It is distinct from the
existing unnamed_addr attribute in that it only describes a local property
of the module rather than a global property of the symbol.
This attribute is intended to be used by the code generator and LTO to allow
the linker to decide whether the global needs to be in the symbol table. It is
possible to exclude a global from the symbol table if three things are true:
- This attribute is present on every instance of the global (which means that
the normal rule that the global must have a unique address can be broken without
being observable by the program by performing comparisons against the global's
address)
- The global has linkonce_odr linkage (which means that each linkage unit must have
its own copy of the global if it requires one, and the copy in each linkage unit
must be the same)
- It is a constant or a function (which means that the program cannot observe that
the unique-address rule has been broken by writing to the global)
Although this attribute could in principle be computed from the module
contents, LTO clients (i.e. linkers) will normally need to be able to compute
this property as part of symbol resolution, and it would be inefficient to
materialize every module just to compute it.
See:
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20160509/356401.htmlhttp://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20160516/356738.html
for earlier discussion.
Part of the fix for PR27553.
Differential Revision: http://reviews.llvm.org/D20348
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272709 91177308-0d34-0410-b5e6-96231b3b80d8
The exit-on-error flag in the ARM test is necessary in order to avoid an
unreachable in the DAGTypeLegalizer, when trying to expand a physical register.
We can also avoid this situation by introducing a bitcast early on, where the
invalid scalar-to-vector conversion is detected.
We also add a test for PowerPC, which goes through a similar code path in the
SelectionDAGBuilder.
Fixes PR27765.
Differential Revision: http://reviews.llvm.org/D21061
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272644 91177308-0d34-0410-b5e6-96231b3b80d8
Using an LLVM IR aggregate return value type containing three
or more integer values causes an abort in the fast isel pass.
This patch adds two more registers to RetCC_PPC64_ELF_FIS to
allow returning up to four integers with fast isel, just the
same as is currently supported with regular isel (RetCC_PPC).
This is needed for Swift and (possibly) other non-clang frontends.
Fixes PR26190.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272005 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Also convert test/CodeGen/PowerPC/vsx-ldst-builtin-le.ll to use
FileCheck instead of two grep and count runs.
This change is needed to avoid spurious diffs in these tests when
EarlyCSE is improved to use MemorySSA and can do more load elimination.
Reviewers: hfinkel
Subscribers: mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D20238
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@271553 91177308-0d34-0410-b5e6-96231b3b80d8
Fix PR27943 "Bad machine code: Using an undefined physical register".
SUBFC8 implicitly defines the CR0 register, but this was omitted in
the instruction definition.
Patch by Jameson Nash <jameson@juliacomputing.com>
Reviewers: hfinkel
Differential Revision: http://reviews.llvm.org/D20802
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@271425 91177308-0d34-0410-b5e6-96231b3b80d8
We now handle them just like non hidden ones. This was already the case
on x86 (r207518) and arm (r207517).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@270205 91177308-0d34-0410-b5e6-96231b3b80d8
Very few things in MC itself use the option. Most of the code that that
uses it could be move to CodeGen.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@269871 91177308-0d34-0410-b5e6-96231b3b80d8
When processing inline asm that contains errors, make sure we can recover
gracefully by creating an UNDEF SDValue for the inline asm statement before
returning from SelectionDAGBuilder::visitInlineAsm. This is necessary for
consumers that don't exit on the first error that is emitted (e.g. clang)
and that would assert later on.
Fixes PR24071.
Patch by Diana Picus.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@269811 91177308-0d34-0410-b5e6-96231b3b80d8
Without a diagnostic handler installed, llc's behaviour is to exit on the first
error that it encounters. This is very different from the behaviour of clang
and other front ends, which try to gather as many errors as possible before
exiting.
This commit adds a diagnostic handler to llc, allowing it to find and report
more than one error. The old behaviour is preserved under a flag (-exit-on-error).
Some of the tests fail with the new diagnostic handler, so they have to use the
new flag in order to run under the previous behaviour. Some of these are known
bugs, others need further investigation. Ideally, we should fix the tests and
remove the flag at some point in the future.
Reapplied after fixing the LLDB build that was broken due to the new
DiagnosticSeverity in LLVMContext.h, and fixed an UB in the new change.
Patch by Diana Picus.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@269655 91177308-0d34-0410-b5e6-96231b3b80d8
Without a diagnostic handler installed, llc's behaviour is to exit on the first
error that it encounters. This is very different from the behaviour of clang
and other front ends, which try to gather as many errors as possible before
exiting.
This commit adds a diagnostic handler to llc, allowing it to find and report
more than one error. The old behaviour is preserved under a flag (-exit-on-error).
Some of the tests fail with the new diagnostic handler, so they have to use the
new flag in order to run under the previous behaviour. Some of these are known
bugs, others need further investigation. Ideally, we should fix the tests and
remove the flag at some point in the future.
Reapplied after fixing the LLDB build that was broken due to the new
DiagnosticSeverity in LLVMContext.h.
Patch by Diana Picus.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@269563 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r269428, as it breaks the LLDB build. We need to
understand how to change LLDB in the same way as LLC before landing this
again.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@269432 91177308-0d34-0410-b5e6-96231b3b80d8
Without a diagnostic handler installed, llc's behaviour is to exit on the first
error that it encounters. This is very different from the behaviour of clang
and other front ends, which try to gather as many errors as possible before
exiting.
This commit adds a diagnostic handler to llc, allowing it to find and report
more than one error. The old behaviour is preserved under a flag (-exit-on-error).
Some of the tests fail with the new diagnostic handler, so they have to use the
new flag in order to run under the previous behaviour. Some of these are known
bugs, others need further investigation. Ideally, we should fix the tests and
remove the flag at some point in the future.
Patch by Diana Picus.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@269428 91177308-0d34-0410-b5e6-96231b3b80d8
While promoting nodes in PPCTargetLowering::DAGCombineExtBoolTrunc, it is
possible for one of the nodes to be replaced by another. To make sure we do not
visit the deleted nodes, and to make sure we visit the replacement nodes, use a
list of HandleSDNodes to track the to-be-promoted nodes during the promotion
process.
The same fix has been applied to the analogous code in
PPCTargetLowering::DAGCombineTruncBoolExt.
Fixes PR26985.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@269272 91177308-0d34-0410-b5e6-96231b3b80d8
An oddity of the .ll syntax is that the "@var = " in
@var = global i32 42
is optional. Writing just
global i32 42
is equivalent to
@0 = global i32 42
This means that there is a pretty big First set at the top level. The
current implementation maintains it manually. I was trying to refactor
it, but then started wondering why keep it a all. I personally find the
above syntax confusing. It looks like something is missing.
This patch removes the feature and simplifies the parser.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@269096 91177308-0d34-0410-b5e6-96231b3b80d8
This instruction is just a control flow marker - it should not
actually exist in the object file. Unfortunately, nothing catches
it before it gets to AsmPrinter. If integrated assembler is used,
it's considered to be a normal 4-byte instruction, and emitted as
an all-0 word, crashing the program. With external assembler,
a comment is emitted.
Fixed by setting Size to 0 and handling it in MCCodeEmitter - this
means the comment will still be emitted if integrated assembler
is not used.
This broke an ASan test, which has been disabled for a long time
as a result (see the discussion on D19657). We can reenable it
once this lands.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267943 91177308-0d34-0410-b5e6-96231b3b80d8
visitAND, when folding and (load) forgets to check which output of
an indexed load is involved, happily folding the updated address
output on the following testcase:
target datalayout = "e-m:e-i64:64-n32:64"
target triple = "powerpc64le-unknown-linux-gnu"
%typ = type { i32, i32 }
define signext i32 @_Z8access_pP1Tc(%typ* %p, i8 zeroext %type) {
%b = getelementptr inbounds %typ, %typ* %p, i64 0, i32 1
%1 = load i32, i32* %b, align 4
%2 = ptrtoint i32* %b to i64
%3 = and i64 %2, -35184372088833
%4 = inttoptr i64 %3 to i32*
%_msld = load i32, i32* %4, align 4
%zzz = add i32 %1, %_msld
ret i32 %zzz
}
Fix this by checking ResNo.
I've found a few more places that currently neglect to check for
indexed load, and tightened them up as well, but I don't have test
cases for them. In fact, they might not be triggerable at all,
at least with current targets. Still, better safe than sorry.
Differential Revision: http://reviews.llvm.org/D19202
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267420 91177308-0d34-0410-b5e6-96231b3b80d8
ADD8TLS, a variant of add instruction used for initial-exec TLS,
currently accepts r0 as a source register. While add itself supports
r0 just fine, linker can relax it to a local-exec sequence, converting
it to addi - which doesn't support r0.
Differential Revision: http://reviews.llvm.org/D19193
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267388 91177308-0d34-0410-b5e6-96231b3b80d8
Currently each Function points to a DISubprogram and DISubprogram has a
scope field. For member functions the scope is a DICompositeType. DIScopes
point to the DICompileUnit to facilitate type uniquing.
Distinct DISubprograms (with isDefinition: true) are not part of the type
hierarchy and cannot be uniqued. This change removes the subprograms
list from DICompileUnit and instead adds a pointer to the owning compile
unit to distinct DISubprograms. This would make it easy for ThinLTO to
strip unneeded DISubprograms and their transitively referenced debug info.
Motivation
----------
Materializing DISubprograms is currently the most expensive operation when
doing a ThinLTO build of clang.
We want the DISubprogram to be stored in a separate Bitcode block (or the
same block as the function body) so we can avoid having to expensively
deserialize all DISubprograms together with the global metadata. If a
function has been inlined into another subprogram we need to store a
reference the block containing the inlined subprogram.
Attached to https://llvm.org/bugs/show_bug.cgi?id=27284 is a python script
that updates LLVM IR testcases to the new format.
http://reviews.llvm.org/D19034
<rdar://problem/25256815>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@266446 91177308-0d34-0410-b5e6-96231b3b80d8
[PPC] Previously when casting generic loads to LXV2DX/ST instructions we
would leave the original load return type in place allowing for an
assertion failure when we merge two equivalent LXV2DX nodes with
different types.
This fixes PR27350.
Reviewers: nemanjai
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D19133
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@266438 91177308-0d34-0410-b5e6-96231b3b80d8
In the ELFv2 ABI, we are not required to save all CR fields. If only one
nonvolatile CR field is clobbered, use mfocrf instead of mfcr to
selectively save the field, because mfocrf has short latency compares to
mfcr.
Thanks Nemanja's invaluable hint!
Reviewers: nemanjai tjablin hfinkel kbarton
http://reviews.llvm.org/D17749
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@266038 91177308-0d34-0410-b5e6-96231b3b80d8
In Memcpy lowering we had missed a dependence from the load of the
operation to successor operations. This causes us to potentially
construct an in initial DAG with a memory dependence not fully
represented in the chain sub-DAG but rather require looking at the
entire DAG breaking alias analysis by allowing incorrect repositioning
of memory operations.
To work around this, r200033 changed DAGCombiner::GatherAllAliases to be
conservative if any possible issues to happen. Unfortunately this check
forbade many non-problematic situations as well. For example, it's
common for incoming argument lowering to add a non-aliasing load hanging
off of EntryNode. Then, if GatherAllAliases visited EntryNode, it would
find that other (unvisited) use of the EntryNode chain, and just give up
entirely. Furthermore, the check was incomplete: it would not actually
detect all such potentially problematic DAG constructions, because
GatherAllAliases did not guarantee to visit all chain nodes going up to
the root EntryNode. This is in general fine -- giving up early will just
miss a potential optimization, not generate incorrect results. But, for
this non-chain dependency detection code, it's possible that you could
have a load attached to a higher-up chain node than any which were
visited. If that load aliases your store, but the only dependency is
through the value operand of a non-aliasing store, it would've been
missed by this code, and potentially reordered.
With the dependence added, this check can be removed and Alias Analysis
can be much more aggressive. This fixes code quality regression in the
Consecutive Store Merge cleanup (D14834).
Test Change:
ppc64-align-long-double.ll now may see multiple serializations
of its stores
Differential Revision: http://reviews.llvm.org/D18062
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@265836 91177308-0d34-0410-b5e6-96231b3b80d8
This is the same change on PPC64 as r255821 on AArch64. I have even borrowed
his commit message.
The access function has a short entry and a short exit, the initialization
block is only run the first time. To improve the performance, we want to
have a short frame at the entry and exit.
We explicitly handle most of the CSRs via copies. Only the CSRs that are not
handled via copies will be in CSR_SaveList.
Frame lowering and prologue/epilogue insertion will generate a short frame
in the entry and exit according to CSR_SaveList. The majority of the CSRs will
be handled by register allcoator. Register allocator will try to spill and
reload them in the initialization block.
We add CSRsViaCopy, it will be explicitly handled during lowering.
1> we first set FunctionLoweringInfo->SplitCSR if conditions are met (the target
supports it for the given machine function and the function has only return
exits). We also call TLI->initializeSplitCSR to perform initialization.
2> we call TLI->insertCopiesSplitCSR to insert copies from CSRsViaCopy to
virtual registers at beginning of the entry block and copies from virtual
registers to CSRsViaCopy at beginning of the exit blocks.
3> we also need to make sure the explicit copies will not be eliminated.
Author: Tom Jablin (tjablin)
Reviewers: hfinkel kbarton cycheng
http://reviews.llvm.org/D17533
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@265781 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
EHPad BB are not entered the classic way and therefor do not need to be placed after their predecessors. This patch make sure EHPad BB are not chosen amongst successors to form chains, and are selected as last resort when selecting the best candidate.
EHPad are scheduled in reverse probability order in order to have them flow into each others naturally.
Reviewers: chandlerc, majnemer, rafael, MatzeB, escha, silvas
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D17625
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@265726 91177308-0d34-0410-b5e6-96231b3b80d8
http://reviews.llvm.org/D18562
A large number of testcases has been modified so they pass after this test.
One testcase is deleted, because I realized even after undoing the original
change that was committed with this testcase, the testcase still passes. So
I removed it. The change to one other testcase (test/CodeGen/PowerPC/pr25802.ll)
is an arbitrary change to keep it passing. Given the original intention of the
testcase, and the fact that fixing it will require some time to change the testcase,
we concluded that this quick change will be enough.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@265683 91177308-0d34-0410-b5e6-96231b3b80d8
This patch enable sibling call optimization on ppc64 ELFv1/ELFv2 abi, and
add a couple of test cases. This patch also passed llvm/clang bootstrap
test, and spec2006 build/run/result validation.
Original issue: https://llvm.org/bugs/show_bug.cgi?id=25617
Great thanks to Tom's (tjablin) help, he contributed a lot to this patch.
Thanks Hal and Kit's invaluable opinions!
Reviewers: hfinkel kbarton
http://reviews.llvm.org/D16315
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@265506 91177308-0d34-0410-b5e6-96231b3b80d8
We missed a handful of .mir tests that existed outside the
test/CodeGen/MIR directory.
Also fix the three powerpc .mir tests that nobody noticed were broken.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@265350 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, HandleLastUse would delete RegRef information for sub-registers
if they were dead even if their corresponding super-register were still live.
If the super-register were later renamed, then the definitions of the
sub-register would not be updated appropriately. This patch alters the
behavior so that RegInfo information for sub-registers is only deleted when
the sub-register and super-register are both dead.
This resolves PR26775. This is the mirror image of Hal's r227311 commit.
Author: Tom Jablin (tjablin)
Reviewers: kbarton uweigand nemanjai hfinkel
http://reviews.llvm.org/D18448
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@265097 91177308-0d34-0410-b5e6-96231b3b80d8
