Summary:
In SamplePGO, if the profile is collected from non-LTO binary, and used to drive ThinLTO, the indirect call promotion may fail because ThinLTO adjusts local function names to avoid conflicts. There are two places of where the mismatch can happen:
1. thin-link prepends SourceFileName to front of FuncName to build the GUID (GlobalValue::getGlobalIdentifier). Unlike instrumentation FDO, SamplePGO does not use the PGOFuncName scheme and therefore the indirect call target profile data contains a hash of the OriginalName.
2. backend compiler promotes some local functions to global and appends .llvm.{$ModuleHash} to the end of the FuncName to derive PromotedFunctionName
This patch tries at the best effort to find the GUID from the original local function name (in profile), and use that in ICP promotion, and in SamplePGO matching that happens in the backend after importing/inlining:
1. in thin-link, it builds the map from OriginalName to GUID so that when thin-link reads in indirect call target profile (represented by OriginalName), it knows which GUID to import.
2. in backend compiler, if sample profile reader cannot find a profile match for PromotedFunctionName, it will try to find if there is a match for OriginalFunctionName.
3. in backend compiler, we build symbol table entry for OriginalFunctionName and pointer to the same symbol of PromotedFunctionName, so that ICP can find the correct target to promote.
Reviewers: mehdi_amini, tejohnson
Reviewed By: tejohnson
Subscribers: llvm-commits, Prazek
Differential Revision: https://reviews.llvm.org/D30754
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@297757 91177308-0d34-0410-b5e6-96231b3b80d8
The summary information includes all uses of llvm.type.test and
llvm.type.checked.load intrinsics that can be used to devirtualize calls,
including any constant arguments for virtual constant propagation.
Differential Revision: https://reviews.llvm.org/D29734
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@294795 91177308-0d34-0410-b5e6-96231b3b80d8
This is a follow-up to https://reviews.llvm.org/D29349. It turns out
that NeedUpgradeToDIGlobalVariableExpression is always necessary when
we encountered a version==0 record because it may always be referenced
via a list of globals in a DICompileUnit. My tests weren't good enough
to catch this though. To trigger this case, we need much older bitcode
produced by LLVM around version 3.7.
<rdar://problem/30404262>
Differential Revision: https://reviews.llvm.org/D29693
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@294488 91177308-0d34-0410-b5e6-96231b3b80d8
The bitcode upgrade for DIGlobalVariable unconditionally wrapped
DIGlobalVariables in a DIGlobalVariableExpression. When a
DIGlobalVariable is referenced by a DIImportedEntity, however, this is
wrong. This patch fixes the bitcode upgrade by deferring the creation
of DIGlobalVariableExpressions until we know the context of the
DIGlobalVariable.
<rdar://problem/30134279>
Differential Revision: https://reviews.llvm.org/D29349
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@294318 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r293970.
After more discussion, this belongs to the linker side and
there is no added value to do it at this level.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@293993 91177308-0d34-0410-b5e6-96231b3b80d8
When a symbol is not exported outside of the
DSO, it is can be hidden. Usually we try to internalize
as much as possible, but it is not always possible, for
instance a symbol can be referenced outside of the LTO
unit, or there can be cross-module reference in ThinLTO.
This is a recommit of r293912 after fixing build failures,
and a recommit of r293918 after fixing LLD tests.
Differential Revision: https://reviews.llvm.org/D28978
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@293970 91177308-0d34-0410-b5e6-96231b3b80d8
When a symbol is not exported outside of the
DSO, it is can be hidden. Usually we try to internalize
as much as possible, but it is not always possible, for
instance a symbol can be referenced outside of the LTO
unit, or there can be cross-module reference in ThinLTO.
This is a recommit of r293912 after fixing build failures.
Differential Revision: https://reviews.llvm.org/D28978
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@293918 91177308-0d34-0410-b5e6-96231b3b80d8
When a symbol is not exported outside of the
DSO, it is can be hidden. Usually we try to internalize
as much as possible, but it is not always possible, for
instance a symbol can be referenced outside of the LTO
unit, or there can be cross-module reference in ThinLTO.
Differential Revision: https://reviews.llvm.org/D28978
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@293912 91177308-0d34-0410-b5e6-96231b3b80d8
We had various variants of defining dump() functions in LLVM. Normalize
them (this should just consistently implement the things discussed in
http://lists.llvm.org/pipermail/cfe-dev/2014-January/034323.html
For reference:
- Public headers should just declare the dump() method but not use
LLVM_DUMP_METHOD or #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP)
- The definition of a dump method should look like this:
#if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP)
LLVM_DUMP_METHOD void MyClass::dump() {
// print stuff to dbgs()...
}
#endif
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@293359 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
MetadataLoader::MetadataLoaderImpl::parseOneMetadata uses
the following construct in a number of places:
```
MetadataList.assignValue(<...>, NextMetadataNo++);
```
There, NextMetadataNo gets incremented, and since the order
of arguments evaluation is not specified, that can happen
before or after other arguments are evaluated.
In a few cases the other arguments indirectly use NextMetadataNo.
For instance, it's
```
MetadataList.assignValue(
GET_OR_DISTINCT(DIModule,
(Context, getMDOrNull(Record[1]),
getMDString(Record[2]), getMDString(Record[3]),
getMDString(Record[4]), getMDString(Record[5]))),
NextMetadataNo++);
```
getMDOrNull calls getMD that uses NextMetadataNo:
```
MetadataList.getMetadataFwdRef(NextMetadataNo);
```
Therefore, the order of evaluation becomes important. That caused
a very subtle LLD crash that only happens if compiled with GCC or
if LLD is built with LTO. In the case if LLD is compiled with Clang
and regular linking mode, everything worked as intended.
This change extracts incrementing of NextMetadataNo outside of
the arguments list to guarantee the correct order of evaluation.
For the record, this has taken 3 days to track to the origin. It all
started with a ThinLTO bot in Chrome not being able to link a target
if debug info is enabled.
Reviewers: pcc, mehdi_amini
Reviewed By: mehdi_amini
Subscribers: aprantl, llvm-commits
Differential Revision: https://reviews.llvm.org/D29204
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@293291 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Without this, we're stressing the RAUW of unique nodes,
which is a costly operation. This is intended to limit
the number of RAUW, and is very effective on the total
link-time of opt with ThinLTO, before:
real 4m4.587s user 15m3.401s sys 0m23.616s
after:
real 3m25.261s user 12m22.132s sys 0m24.152s
Reviewers: tejohnson, pcc
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D28751
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@292420 91177308-0d34-0410-b5e6-96231b3b80d8
With some minor manual fixes for using function_ref instead of
std::function. No functional change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@291904 91177308-0d34-0410-b5e6-96231b3b80d8
The change in r291362 was too agressive. We still need to flush at the
end of the block because function local metadata can introduce fwd
ref as well.
(Bootstrap with ThinLTO was broken)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@291379 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The issue happens with:
%0 = ....., !tbaa !0
%1 = ....., !tbaa !1
With !0 that references !1.
In this case when loading !0 we generates a temporary for the
operand !1. We now flush it immediately and trigger the load of
!1 before moving on. If we don't we get the temporary when
attaching to %1. This is usually not an issue except that we
eagerly try to update TBAA MDNodes, which is obviously not possible
if we only have a temporary.
Differential Revision: https://reviews.llvm.org/D28423
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@291362 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Using the linker-supplied list of "preserved" symbols, we can compute
the list of "dead" symbols, i.e. the one that are not reachable from
a "preserved" symbol transitively on the reference graph.
Right now we are using this information to mark these functions as
non-eligible for import.
The impact is two folds:
- Reduction of compile time: we don't import these functions anywhere
or import the function these symbols are calling.
- The limited number of import/export leads to better internalization.
Patch originally by Mehdi Amini.
Reviewers: mehdi_amini, pcc
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D23488
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@291177 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This adds a new summary flag NotEligibleToImport that subsumes
several existing flags (NoRename, HasInlineAsmMaybeReferencingInternal
and IsNotViableToInline). It also subsumes the checking of references
on the summary that was being done during the thin link by
eligibleForImport() for each candidate. It is much more efficient to
do that checking once during the per-module summary build and record
it in the summary.
Reviewers: mehdi_amini
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D28169
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@291108 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This is a relatively simple scheme: we use the index emitted in the
bitcode to avoid loading all the global metadata. Instead we load
the index with their position in the bitcode so that we can load each
of them individually. Materializing the global metadata block in this
condition only triggers loading the named metadata, and the ones
referenced from there (transitively). When materializing a function,
metadata from the global block are loaded lazily as they are
referenced.
Two main current limitations are:
1) Global values other than functions are not materialized on demand,
so we need to eagerly load METADATA_GLOBAL_DECL_ATTACHMENT records
(and their transitive dependencies).
2) When we load a single metadata, we don't recurse on the operands,
instead we use a placeholder or a temporary metadata. Unfortunately
tepmorary nodes are very expensive. This is why we don't have it
always enabled and only for importing.
These two limitations can be lifted in a subsequent improvement if
needed.
With this change, the total link time of opt with ThinLTO and Debug
Info enabled is going down from 282s to 224s (~20%).
Reviewers: pcc, tejohnson, dexonsmith
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D28113
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@291027 91177308-0d34-0410-b5e6-96231b3b80d8
If this is a problem for anyone (shared_ptr is two pointers in size,
whereas IntrusiveRefCntPtr is 1 - and the ref count control block that
make_shared adds is probably larger than the one int in RefCountedBase)
I'd prefer to address this by adding a lower-overhead version of
shared_ptr (possibly refactoring IntrusiveRefCntPtr into such a thing)
to avoid the intrusiveness - this allows memory ownership to remain
orthogonal to types and at least to me, seems to make code easier to
understand (since no implicit ownership acquisition can happen).
This recommits 291006, reverted in r291007.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@291016 91177308-0d34-0410-b5e6-96231b3b80d8
Breaks Clang's use of bitcode. Reverting until I have a fix to go with
it there.
This reverts commit r291006.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@291007 91177308-0d34-0410-b5e6-96231b3b80d8
If this is a problem for anyone (shared_ptr is two pointers in size,
whereas IntrusiveRefCntPtr is 1 - and the ref count control block that
make_shared adds is probably larger than the one int in RefCountedBase)
I'd prefer to address this by adding a lower-overhead version of
shared_ptr (possibly refactoring IntrusiveRefCntPtr into such a thing)
to avoid the intrusiveness - this allows memory ownership to remain
orthogonal to types and at least to me, seems to make code easier to
understand (since no implicit ownership acquisition can happen).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@291006 91177308-0d34-0410-b5e6-96231b3b80d8
As per post-commit review for r289993 (D27775), we can only safely
import a type as a decl if it has an Identifier, as the Name alone
is not enough to be unique across modules.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@290915 91177308-0d34-0410-b5e6-96231b3b80d8
The Bitstream reader and writer are limited to handle a "size_t" at
most, which means that we can't backpatch and read back a 64bits
value on 32 bits platform.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@290693 91177308-0d34-0410-b5e6-96231b3b80d8
This index record the position for each metadata record in
the bitcode, so that the reader will be able to lazy-load
on demand each individual record.
We also make sure that every abbrev is emitted upfront so
that the block can be skipped while reading.
I don't plan to commit this before having the reader
counterpart, but I figured this can be reviewed mostly
independently.
Recommit r290684 (was reverted in r290686 because a test
was broken) after adding a threshold to avoid emitting
the index when unnecessary (little amount of metadata).
This optimization "hides" a limitation of the ability
to backpatch in the bitstream: we can only backpatch
safely when the position has been flushed. So if we emit
an index for one metadata, it is possible that (part of)
the offset placeholder hasn't been flushed and the backpatch
will fail.
Differential Revision: https://reviews.llvm.org/D28083
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@290690 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This index record the position for each metadata record in
the bitcode, so that the reader will be able to lazy-load
on demand each individual record.
We also make sure that every abbrev is emitted upfront so
that the block can be skipped while reading.
I don't plan to commit this before having the reader
counterpart, but I figured this can be reviewed mostly
independently.
Reviewers: pcc, tejohnson
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D28083
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@290684 91177308-0d34-0410-b5e6-96231b3b80d8
This makes it explicit what is the exact list to handle, and it
looks much more easy to manipulate and understand that the
previous custom tracking of min/max to express the range where
to look for.
Differential Revision: https://reviews.llvm.org/D28089
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@290507 91177308-0d34-0410-b5e6-96231b3b80d8
This is pure code motion, will just make it more reusable when I'll
attempt to lazy-load Metadats on-demand.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@290414 91177308-0d34-0410-b5e6-96231b3b80d8
This is to put the vector into a well defined state. Apparently the state of a
vector after being moved from is valid but unspecified. Found with clang-tidy.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@290298 91177308-0d34-0410-b5e6-96231b3b80d8
Each function summary has an attached list of type identifier GUIDs. The
idea is that during the regular LTO phase we would match these GUIDs to type
identifiers defined by the regular LTO module and store the resolutions in
a top-level "type identifier summary" (which will be implemented separately).
Differential Revision: https://reviews.llvm.org/D27967
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@290280 91177308-0d34-0410-b5e6-96231b3b80d8
This patch implements PR31013 by introducing a
DIGlobalVariableExpression that holds a pair of DIGlobalVariable and
DIExpression.
Currently, DIGlobalVariables holds a DIExpression. This is not the
best way to model this:
(1) The DIGlobalVariable should describe the source level variable,
not how to get to its location.
(2) It makes it unsafe/hard to update the expressions when we call
replaceExpression on the DIGLobalVariable.
(3) It makes it impossible to represent a global variable that is in
more than one location (e.g., a variable with multiple
DW_OP_LLVM_fragment-s). We also moved away from attaching the
DIExpression to DILocalVariable for the same reasons.
This reapplies r289902 with additional testcase upgrades and a change
to the Bitcode record for DIGlobalVariable, that makes upgrading the
old format unambiguous also for variables without DIExpressions.
<rdar://problem/29250149>
https://llvm.org/bugs/show_bug.cgi?id=31013
Differential Revision: https://reviews.llvm.org/D26769
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@290153 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
When reading the metadata bitcode, create a type declaration when
possible for composite types when we are importing. Doing this in
the bitcode reader saves memory. Also it works naturally in the case
when the type ODR map contains a definition for the same composite type
because it was used in the importing module (buildODRType will
automatically use the existing definition and not create a type
declaration).
For Chromium built with -g2, this reduces the aggregate size of the
generated native object files by 66% (from 31G to 10G). It reduced
the time through the ThinLTO link and backend phases by about 20% on
my machine.
Reviewers: mehdi_amini, dblaikie, aprantl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D27775
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289993 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit 289920 (again).
I forgot to implement a Bitcode upgrade for the case where a DIGlobalVariable
has not DIExpression. Unfortunately it is not possible to safely upgrade
these variables without adding a flag to the bitcode record indicating which
version they are.
My plan of record is to roll the planned follow-up patch that adds a
unit: field to DIGlobalVariable into this patch before recomitting.
This way we only need one Bitcode upgrade for both changes (with a
version flag in the bitcode record to safely distinguish the record
formats).
Sorry for the churn!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289982 91177308-0d34-0410-b5e6-96231b3b80d8
