This is conventional command-line tool behavior. -f now just means
"enable binary output on terminals".
Add a -f option to llvm-extract and llvm-link, for consistency.
Remove F_Force from raw_fd_ostream and enable overwriting and
truncating by default. Introduce an F_Excl flag to permit users to
enable a failure when the file already exists. This flag is
currently unused.
Update Makefiles and documentation accordingly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@79990 91177308-0d34-0410-b5e6-96231b3b80d8
instead of as two bools. Use this to add a F_Append flag
which has the obvious behavior.
Other unrelated changes conflated into this patch:
1. REmove EH stuff from llvm-dis and llvm-as, the try blocks
are dead.
2. Simplify the filename inference code in llvm-as/llvm-dis,
because raw_fd_ostream does the right thing with '-'.
3. Switch machine verifier to use raw_ostream instead of ostream
(Which is the thing that needed append in the first place).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@79807 91177308-0d34-0410-b5e6-96231b3b80d8
This is not just a matter of passing in the target triple from the module;
currently backends are making decisions based on the build and host
architecture. The goal is to migrate to making these decisions based off of the
triple (in conjunction with the feature string). Thus most clients pass in the
target triple, or the host triple if that is empty.
This has one important change in the way behavior of the JIT and llc.
For the JIT, it was previously selecting the Target based on the host
(naturally), but it was setting the target machine features based on the triple
from the module. Now it is setting the target machine features based on the
triple of the host.
For LLC, -march was previously only used to select the target, the target
machine features were initialized from the module's triple (which may have been
empty). Now the target triple is taken from the module, or the host's triple is
used if that is empty. Then the triple is adjusted to match -march.
The take away is that -march for llc is now used in conjunction with the host
triple to initialize the subtarget. If users want more deterministic behavior
from llc, they should use -mtriple, or set the triple in the input module.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77946 91177308-0d34-0410-b5e6-96231b3b80d8
- This is a simplified mechanism which just looks up a target based on the
target triple, with a few additional flags.
- Remove getClosestStaticTargetForModule, the moral equivalent is now:
lookupTarget(Mod->getTargetTriple, true, false, ...);
- This no longer does the fuzzy matching with target data (based on endianness
and pointer width) that getClosestStaticTargetForModule was doing, but this
was deemed unnecessary.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77111 91177308-0d34-0410-b5e6-96231b3b80d8
This will let us to hardwire stuff to the global context in the short term while the API is sorted out.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75846 91177308-0d34-0410-b5e6-96231b3b80d8
--- Reverse-merging r75799 into '.':
U test/Analysis/PointerTracking
U include/llvm/Target/TargetMachineRegistry.h
U include/llvm/Target/TargetMachine.h
U include/llvm/Target/TargetRegistry.h
U include/llvm/Target/TargetSelect.h
U tools/lto/LTOCodeGenerator.cpp
U tools/lto/LTOModule.cpp
U tools/llc/llc.cpp
U lib/Target/PowerPC/PPCTargetMachine.h
U lib/Target/PowerPC/AsmPrinter/PPCAsmPrinter.cpp
U lib/Target/PowerPC/PPCTargetMachine.cpp
U lib/Target/PowerPC/PPC.h
U lib/Target/ARM/ARMTargetMachine.cpp
U lib/Target/ARM/AsmPrinter/ARMAsmPrinter.cpp
U lib/Target/ARM/ARMTargetMachine.h
U lib/Target/ARM/ARM.h
U lib/Target/XCore/XCoreTargetMachine.cpp
U lib/Target/XCore/XCoreTargetMachine.h
U lib/Target/PIC16/PIC16TargetMachine.cpp
U lib/Target/PIC16/PIC16TargetMachine.h
U lib/Target/Alpha/AsmPrinter/AlphaAsmPrinter.cpp
U lib/Target/Alpha/AlphaTargetMachine.cpp
U lib/Target/Alpha/AlphaTargetMachine.h
U lib/Target/X86/X86TargetMachine.h
U lib/Target/X86/X86.h
U lib/Target/X86/AsmPrinter/X86ATTAsmPrinter.h
U lib/Target/X86/AsmPrinter/X86AsmPrinter.cpp
U lib/Target/X86/AsmPrinter/X86IntelAsmPrinter.h
U lib/Target/X86/X86TargetMachine.cpp
U lib/Target/MSP430/MSP430TargetMachine.cpp
U lib/Target/MSP430/MSP430TargetMachine.h
U lib/Target/CppBackend/CPPTargetMachine.h
U lib/Target/CppBackend/CPPBackend.cpp
U lib/Target/CBackend/CTargetMachine.h
U lib/Target/CBackend/CBackend.cpp
U lib/Target/TargetMachine.cpp
U lib/Target/IA64/IA64TargetMachine.cpp
U lib/Target/IA64/AsmPrinter/IA64AsmPrinter.cpp
U lib/Target/IA64/IA64TargetMachine.h
U lib/Target/IA64/IA64.h
U lib/Target/MSIL/MSILWriter.cpp
U lib/Target/CellSPU/SPUTargetMachine.h
U lib/Target/CellSPU/SPU.h
U lib/Target/CellSPU/AsmPrinter/SPUAsmPrinter.cpp
U lib/Target/CellSPU/SPUTargetMachine.cpp
U lib/Target/Mips/AsmPrinter/MipsAsmPrinter.cpp
U lib/Target/Mips/MipsTargetMachine.cpp
U lib/Target/Mips/MipsTargetMachine.h
U lib/Target/Mips/Mips.h
U lib/Target/Sparc/AsmPrinter/SparcAsmPrinter.cpp
U lib/Target/Sparc/SparcTargetMachine.cpp
U lib/Target/Sparc/SparcTargetMachine.h
U lib/ExecutionEngine/JIT/TargetSelect.cpp
U lib/Support/TargetRegistry.cpp
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75820 91177308-0d34-0410-b5e6-96231b3b80d8
an existing file is considered an error. Convert several tools
to use raw_fd_ostream instead of std::ostream, and to use this
new option instead of doing a manual check.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75801 91177308-0d34-0410-b5e6-96231b3b80d8
- They still use the TargetMachineRegistry to populate the contents of the
-march option (via the listener interface). We can't just populate it in the
option parser because we can't expect the TargetRegistry to be populated yet
(we no longer rely on static constructors).
- There are a couple ways to finish killing off TargetMachineRegistry, but I
haven't figured out the cleanest one yet...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75773 91177308-0d34-0410-b5e6-96231b3b80d8
of the bitcode reader and ASM parser APIs, as well as supporting it in all of the tools.
Patches for Clang and LLVM-GCC to follow.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74614 91177308-0d34-0410-b5e6-96231b3b80d8
initialization of all targets (InitializeAllTargets.h) or assembler
printers (InitializeAllAsmPrinters.h). This is a step toward the
elimination of relinked object files, so that we can build normal
archives.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73543 91177308-0d34-0410-b5e6-96231b3b80d8
Update code generator to use this attribute and remove NoImplicitFloat target option.
Update llc to set this attribute when -no-implicit-float command line option is used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72959 91177308-0d34-0410-b5e6-96231b3b80d8
Update code generator to use this attribute and remove DisableRedZone target option.
Update llc to set this attribute when -disable-red-zone command line option is used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72894 91177308-0d34-0410-b5e6-96231b3b80d8
Massive check in. This changes the "-fast" flag to "-O#" in llc. If you want to
use the old behavior, the flag is -O0. This change allows for finer-grained
control over which optimizations are run at different -O levels.
Most of this work was pretty mechanical. The majority of the fixes came from
verifying that a "fast" variable wasn't used anymore. The JIT still uses a
"Fast" flag. I'll change the JIT with a follow-up patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@70343 91177308-0d34-0410-b5e6-96231b3b80d8
use the old behavior, the flag is -O0. This change allows for finer-grained
control over which optimizations are run at different -O levels.
Most of this work was pretty mechanical. The majority of the fixes came from
verifying that a "fast" variable wasn't used anymore. The JIT still uses a
"Fast" flag. I'm not 100% sure if it's necessary to change it there...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@70270 91177308-0d34-0410-b5e6-96231b3b80d8
Split Support/Registry.h into two files so that we have less to
recompile every time CommandLine.h is changed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@62312 91177308-0d34-0410-b5e6-96231b3b80d8
instead of requiring all "short description" strings to begin with
two spaces. This makes these strings less mysterious, and it fixes
some cases where short description strings mistakenly did not
begin with two spaces.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57521 91177308-0d34-0410-b5e6-96231b3b80d8
api's look like this:
ModuleProvider *getBytecodeModuleProvider(
const std::string &Filename, ///< Name of file to be read
BCDecompressor_t *BCDC = Compressor::decompressToNewBuffer,
std::string* ErrMsg = 0, ///< Optional error message holder
BytecodeHandler* H = 0 ///< Optional handler for reader events
);
This is ugly, but allows a client to say:
getBytecodeModuleProvider("foo", 0);
If they do this, there is no dependency on the compression libraries, saving
codesize.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@34012 91177308-0d34-0410-b5e6-96231b3b80d8
This pass:
1. Splits TargetMachine into TargetMachine (generic targets, can be implemented
any way, like the CBE) and LLVMTargetMachine (subclass of TM that is used by
things using libcodegen and other support).
2. Instead of having each target fully populate the passmgr for file or JIT
output, move all this to common code, and give targets hooks they can
implement.
3. Commonalize the target population stuff between file emission and JIT
emission.
4. All (native code) codegen stuff now happens in a FunctionPassManager, which
paves the way for "fast -O0" stuff in the CFE later, and now LLC could
lazily stream .bc files from disk to use less memory.
5. There are now many fewer #includes and the targets don't depend on the
scalar xforms or libanalysis anymore (but codegen does).
6. Changing common code generator pass ordering stuff no longer requires
touching all targets.
7. The JIT now has the option of "-fast" codegen or normal optimized codegen,
which is now orthogonal to the fact that JIT'ing is being done.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@30081 91177308-0d34-0410-b5e6-96231b3b80d8
1. Add #includes to LinkAllVMCore.h to get Mangler.o and InlineAsm.o
2. Make Mangler.h and InlineAsm.h use the macros to ensure linkage
3. Make each of the tools with --load options include LinkAllVMCore.h
This should be the last set of changes for this bug and 800.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28719 91177308-0d34-0410-b5e6-96231b3b80d8
pass manager do it's thing." Fixes crash when compiling -g files and suppresses
dwarf statements if no debug info is present.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@25100 91177308-0d34-0410-b5e6-96231b3b80d8
2. Propagate feature "string" to all targets.
3. Implement use of SubtargetFeatures in PowerPCTargetSubtarget.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@23192 91177308-0d34-0410-b5e6-96231b3b80d8
to llc when debugging. Also allow other passes to be run from llc.
Patch contributed by Michael McCracken.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22532 91177308-0d34-0410-b5e6-96231b3b80d8
* Place a try/catch block around the entire tool to Make sure std::string
exceptions are caught and printed before exiting the tool.
* Make sure we catch unhandled exceptions at the top level so that we don't
abort with a useless message but indicate than an unhandled exception was
generated.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@19192 91177308-0d34-0410-b5e6-96231b3b80d8
Move include/Config and include/Support into include/llvm/Config,
include/llvm/ADT and include/llvm/Support. From here on out, all LLVM
public header files must be under include/llvm/.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@16137 91177308-0d34-0410-b5e6-96231b3b80d8
the ability to dynamically load and use targets that are not linked into it
statically. e.g.:
llc -load libparisc.so -march=parisc foo.bc -o foo.s
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@14751 91177308-0d34-0410-b5e6-96231b3b80d8
bytecode file. This means that LLC on X86 will compile to Sparc assembly given a
64-bit input bytecode file...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@7419 91177308-0d34-0410-b5e6-96231b3b80d8
x86 or Sparc, LLC will automatically default to that platform, no guessing
required. On another platform, it will default to `noarch' and will have to
guess which architecture to compile to.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@7207 91177308-0d34-0410-b5e6-96231b3b80d8
Move LowerAllocations, PrintFunction, and SymbolStripping passes, and
the corresponding -disable-strip and -d options, over here to the SPARC
target-specific bits of llc. Rename -d to -dump-asm.
tools/llc/Makefile:
Reindent. Add x86 library so that llc compiles again.
tools/llc/llc.cpp:
Remove support for running arbitrary optimization passes. Use opt instead.
Remove LowerAllocations, PrintFunction, and SymbolStripping passes, as noted
above.
Allow user to select a backend (x86 or SPARC); default to guessing from
the endianness/pointer size of the input bytecode file.
Fix typos.
Delete empty .s file and exit with error status if target does not support
static compilation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@6776 91177308-0d34-0410-b5e6-96231b3b80d8
Eliminate duplicate tracing options and use those defined by the trace passes.
Making the tracing step a module pass that runs before any llc-specific
passes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@3753 91177308-0d34-0410-b5e6-96231b3b80d8
