This should fix the compilation failure on the MSVC buildbots which find a
std::make_unique and llvm::make_unique via ADL, resulting in ambiguity.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229638 91177308-0d34-0410-b5e6-96231b3b80d8
The LoopInfo in combination with depth_first is used to enumerate the
loops.
Right now -analyze is not yet complete. It only prints the result of
the analysis, the report and the run-time checks. Printing the unsafe
depedences will require a bit more reshuffling which I'd like to do in a
follow-on to this patchset. Unsafe dependences are currently checked
via -debug-only=loop-accesses in the new test.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229633 91177308-0d34-0410-b5e6-96231b3b80d8
The only difference between these two is that VectorizerReport adds a
vectorizer-specific prefix to its messages. When LAA is used in the
vectorizer context the prefix is added when we promote the
LoopAccessReport into a VectorizerReport via one of the constructors.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229632 91177308-0d34-0410-b5e6-96231b3b80d8
When I split out LoopAccessReport from this, I need to create some temps
so constness becomes necessary.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229631 91177308-0d34-0410-b5e6-96231b3b80d8
This allows the analysis to be attempted with any loop. This feature
will be used with -analysis. (LV only requests the analysis on loops
that have already satisfied these tests.)
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229630 91177308-0d34-0410-b5e6-96231b3b80d8
Will be used by the new RuntimePointerCheck::print.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229629 91177308-0d34-0410-b5e6-96231b3b80d8
Also add pass name as an argument to VectorizationReport::emitAnalysis.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229628 91177308-0d34-0410-b5e6-96231b3b80d8
See the comment in the code.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229627 91177308-0d34-0410-b5e6-96231b3b80d8
This is a function pass that runs the analysis on demand. The analysis
can be initiated by querying the loop access info via LAA::getInfo. It
either returns the cached info or runs the analysis.
Symbolic stride information continues to reside outside of this analysis
pass. We may move it inside later but it's not a priority for me right
now. The idea is that Loop Distribution won't support run-time stride
checking at least initially.
This means that when querying the analysis, symbolic stride information
can be provided optionally. Whether stride information is used can
invalidate the cache entry and rerun the analysis. Note that if the
loop does not have any symbolic stride, the entry should be preserved
across Loop Distribution and LV.
Since currently the only user of the pass is LV, I just check that the
symbolic stride information didn't change when using a cached result.
On the LV side, LoopVectorizationLegality requests the info object
corresponding to the loop from the analysis pass. A large chunk of the
diff is due to LAI becoming a pointer from a reference.
A test will be added as part of the -analyze patch.
Also tested that with AVX, we generate identical assembly output for the
testsuite (including the external testsuite) before and after.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229626 91177308-0d34-0410-b5e6-96231b3b80d8
blockNeedsPredication is in LoopAccess in order to share it with the
vectorizer. It's a utility needed by LoopAccess not strictly provided
by it but it's a good place to share it. This makes the function static
so that it no longer required to create an LoopAccessInfo instance in
order to access it from LV.
This was actually causing problems because it would have required
creating LAI much earlier that LV::canVectorizeMemory().
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229625 91177308-0d34-0410-b5e6-96231b3b80d8
LAA will be an on-demand analysis pass, so we need to cache the result
of the analysis. canVectorizeMemory is renamed to analyzeLoop which
computes the result. canVectorizeMemory becomes the query function for
the cached result.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229624 91177308-0d34-0410-b5e6-96231b3b80d8
The transformation passes will query this and then emit them as part of
their own report. The currently only user LV is modified to do just
that.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229623 91177308-0d34-0410-b5e6-96231b3b80d8
As LAA is becoming a pass, we can no longer pass the params to its
constructor. This changes the command line flags to have external
storage. These can now be accessed both from LV and LAA.
VectorizerParams is moved out of LoopAccessInfo in order to shorten the
code to access it.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229622 91177308-0d34-0410-b5e6-96231b3b80d8
LoopAccessAnalysis will be used as the name of the pass.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229621 91177308-0d34-0410-b5e6-96231b3b80d8
Since VectorizationReport will be part of the result of the analysis it
will be stored in a container. However, one of its members is a
raw_string_ostream which cannot be copy-constructed.
This makes the raw_string_ostream local to the << operator.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229620 91177308-0d34-0410-b5e6-96231b3b80d8
InstCombiner::visitGetElementPtrInst was using getFirstNonPHI to compute the
insertion point, which caused the verifier to complain when a GEP was inserted
before a landingpad instruction. This commit fixes it to use getFirstInsertionPt
instead.
rdar://problem/19394964
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229619 91177308-0d34-0410-b5e6-96231b3b80d8
When visiting the initial list of "root" instructions (those which must always
be alive), for those that are integer-valued (such as invokes returning an
integer), we mark their bits as (initially) all dead (we might, obviously, find
uses of those bits later, but all bits are assumed dead until proven
otherwise). Don't do so, however, if we're already seen a use of those bits by
another root instruction (such as a store).
Fixes a miscompile of the sanitizer unit tests on x86_64.
Also, add a debug line for visiting the root instructions, and remove a debug
line which tried to print instructions being removed (printing dead
instructions is dangerous, and can sometimes crash).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229618 91177308-0d34-0410-b5e6-96231b3b80d8
Some formats capitalized these, but most didn't. Change
them all to be consistently lowercase.
Now, non-encoding fields and convenience bits are capitalized.
Also remove weird looking empty line in some of the formats.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229613 91177308-0d34-0410-b5e6-96231b3b80d8
src1 doesn't have modifiers, but the operand was missing
resulting in an encoding build error when all fields
are required.'
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229611 91177308-0d34-0410-b5e6-96231b3b80d8
Have the InstrProfWriter return a MemoryBuffer instead of a
std::string. This fixes the alignment issues the reader would hit, and
it's a more appropriate type for this anyway.
I've also removed an ugly helper function that's not needed since
we're allowing initializer lists now, and updated some error code
checks based on MSVC's issues with r229473.
This reverts r229483, reapplying r229478.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229602 91177308-0d34-0410-b5e6-96231b3b80d8
Instead of requiring MSVC 2013 U4, we simply warn users, since some might
not bt able to immediately upgrade.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229598 91177308-0d34-0410-b5e6-96231b3b80d8
initialization. Initialize the subtarget once per function and
migrate EmitStartOfAsmFile to either use calls on the
TargetMachine or get information from the subtarget we'd use
for assembling.
The top-level-ness of the MIPS attribute output for assembly is,
by nature, contrary to how we'd want to do this for an LTO
situation where we have multiple cpu architectures so this
solution is good enough for now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229596 91177308-0d34-0410-b5e6-96231b3b80d8
I could not come up with a test case for this one; but I don't think
`getPreStartForSignExtend` can assume `AR` is `nsw` -- there is one
place in scalar evolution that calls `getSignExtendAddRecStart(AR,
...)` without proving that `AR` is `nsw`
(line 1564)
OperandExtendedAdd =
getAddExpr(WideStart,
getMulExpr(WideMaxBECount,
getZeroExtendExpr(Step, WideTy)));
if (SAdd == OperandExtendedAdd) {
// If AR wraps around then
//
// abs(Step) * MaxBECount > unsigned-max(AR->getType())
// => SAdd != OperandExtendedAdd
//
// Thus (AR is not NW => SAdd != OperandExtendedAdd) <=>
// (SAdd == OperandExtendedAdd => AR is NW)
const_cast<SCEVAddRecExpr *>(AR)->setNoWrapFlags(SCEV::FlagNW);
// Return the expression with the addrec on the outside.
return getAddRecExpr(getSignExtendAddRecStart(AR, Ty, this),
getZeroExtendExpr(Step, Ty),
L, AR->getNoWrapFlags());
}
Differential Revision: http://reviews.llvm.org/D7640
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229594 91177308-0d34-0410-b5e6-96231b3b80d8
This patch teaches fast-isel how to select a (V)CVTSI2SSrr for an integer to
float conversion, and how to select a (V)CVTSI2SDrr for an integer to double
conversion.
Added test 'fast-isel-int-float-conversion.ll'.
Differential Revision: http://reviews.llvm.org/D7698
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229589 91177308-0d34-0410-b5e6-96231b3b80d8
The problem in the original patch was not switching back to .text after printing
an eh table.
Original message:
On ELF, put PIC jump tables in a non executable section.
Fixes PR22558.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229586 91177308-0d34-0410-b5e6-96231b3b80d8
Previous versions of MSVC 2013 would miscompile ASTMatchers (and/or their
tests). Bump up the requirement and make sure we know about the minor
revision.
Minimum required version found by Michael Edwards!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229584 91177308-0d34-0410-b5e6-96231b3b80d8
If an EH table is printed in between the function and the jump table we would
fail to switch back to the text section to print the jump table.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229580 91177308-0d34-0410-b5e6-96231b3b80d8
Add missing specialized node overloads for `MDNode::clone()` (they were
on most of the node types already, but missing from the others).
`MDNode::clone()` returns `TempMDNode` (`std::unique_ptr<MDNode,...>`),
while `TempMDSubrange::clone()` (for example) returns the more
convenient `TempMDSubrange` (`std::unique_ptr<TempMDSubrange,...>`).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229579 91177308-0d34-0410-b5e6-96231b3b80d8
Previously `DwarfExpression::AddExpression()` relied on
default-constructing the end iterators for `DIExpression` -- once the
operands are represented explicitly via `MDExpression` (instead of via
the strange `StringRef` navigator in `DIHeaderIterator`) this won't
work. Explicitly take an iterator for the end of the range.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229572 91177308-0d34-0410-b5e6-96231b3b80d8
