Perform the upgrading in steps.
* First, create a map of the invokes to the EH intrinsics.
* Next, take that mapping and determine if the invoke's unwind destination has a
single predecessor. If not, then create a new empty block to hold the new
landingpad instruction.
* Create a landingpad instruction into the uwnind destination. Fill it with the
values from the old selector. Map the old intrinsic calls to the new
landingpad values (there may be multiple landingpad instructions per instrinic
call pairs).
* Go through the old intrinsic calls, create a PHI node when necessary, and then
replace their values with the new values from the landingpad instructions.
* Delete all dead instructions.
* ???
* Profit!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@138990 91177308-0d34-0410-b5e6-96231b3b80d8
Optimize chained bitcasts of the form A->B->A.
Undo r138722 and change isEliminableCastPair to allow this case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@138756 91177308-0d34-0410-b5e6-96231b3b80d8
This upgrade suffers from the problems of the old EH scheme - i.e., that the
calls to llvm.eh.exception() and llvm.eh.selector() can wander off and get
lost. It makes a valiant effort to reclaim these little lost lambs.
This is a first draft, so it hasn't yet been hooked up to the parser.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@138602 91177308-0d34-0410-b5e6-96231b3b80d8
getFirstInsertionPt() returns an iterator to the first insertion point in a
basic block. This is after all PHIs and any other instruction which is required
to be at the top of the basic block (like LandingPadInst).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@137744 91177308-0d34-0410-b5e6-96231b3b80d8
This caused a race condition where a thread calls ~LLVMContextImpl which calls
Module::dropAllReferences which calls begin() on an empty ilist that would
create the sentinel, which racily accesses the global context.
This can not be fixed by locking inside createSentinel because the lock would
need to be shared with all users of the global context, including those that
reside outside LLVM's own code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@137546 91177308-0d34-0410-b5e6-96231b3b80d8
of the instruction.
Note that this change affects the existing non-atomic load and store
instructions; the parser now accepts both forms, and the change is noted
in the release notes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@137527 91177308-0d34-0410-b5e6-96231b3b80d8
This implements the 'landingpad' instruction. It's used to indicate that a basic
block is a landing pad. There are several restrictions on its use (see
LangRef.html for more detail). These restrictions allow the exception handling
code to gather the information it needs in a much more sane way.
This patch has the definition, implementation, C interface, parsing, and bitcode
support in it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@137501 91177308-0d34-0410-b5e6-96231b3b80d8
Frontends(eg. clang) might pass incomplete form of IR, to step off the way beyond iterator end. In the case I had met, it took infinite loop due to meeting bogus PHInode.
Thanks to Jay Foad and John McCall.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@137175 91177308-0d34-0410-b5e6-96231b3b80d8
The 'unwind' function is going away with the new EH rewrite. This is step 0 in
keeping front-ends from using it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136683 91177308-0d34-0410-b5e6-96231b3b80d8
This adds the 'resume' instruction class, IR parsing, and bitcode reading and
writing. The 'resume' instruction resumes propagation of an existing (in-flight)
exception whose unwinding was interrupted with a 'landingpad' instruction (to be
added later).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136589 91177308-0d34-0410-b5e6-96231b3b80d8
working on x86 (at least for trivial testcases); other architectures will
need more work so that they actually emit the appropriate instructions for
orderings stricter than 'monotonic'. (As far as I can tell, the ARM, PPC,
Mips, and Alpha backends need such changes.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136457 91177308-0d34-0410-b5e6-96231b3b80d8
specified in the same file that the library itself is created. This is
more idiomatic for CMake builds, and also allows us to correctly specify
dependencies that are missed due to bugs in the GenLibDeps perl script,
or change from compiler to compiler. On Linux, this returns CMake to
a place where it can relably rebuild several targets of LLVM.
I have tried not to change the dependencies from the ones in the current
auto-generated file. The only places I've really diverged are in places
where I was seeing link failures, and added a dependency. The goal of
this patch is not to start changing the dependencies, merely to move
them into the correct location, and an explicit form that we can control
and change when necessary.
This also removes a serialization point in the build because we don't
have to scan all the libraries before we begin building various tools.
We no longer have a step of the build that regenerates a file inside the
source tree. A few other associated cleanups fall out of this.
This isn't really finished yet though. After talking to dgregor he urged
switching to a single CMake macro to construct libraries with both
sources and dependencies in the arguments. Migrating from the two macros
to that style will be a follow-up patch.
Also, llvm-config is still generated with GenLibDeps.pl, which means it
still has slightly buggy dependencies. The internal CMake
'llvm-config-like' macro uses the correct explicitly specified
dependencies however. A future patch will switch llvm-config generation
(when using CMake) to be based on these deps as well.
This may well break Windows. I'm getting a machine set up now to dig
into any failures there. If anyone can chime in with problems they see
or ideas of how to solve them for Windows, much appreciated.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136433 91177308-0d34-0410-b5e6-96231b3b80d8
'atomicrmw' instructions, which allow representing all the current atomic
rmw intrinsics.
The allowed operands for these instructions are heavily restricted at the
moment; we can probably loosen it a bit, but supporting general
first-class types (where it makes sense) might get a bit complicated,
given how SelectionDAG works.
As an initial cut, these operations do not support specifying an alignment,
but it would be possible to add if we think it's useful. Specifying an
alignment lower than the natural alignment would be essentially
impossible to support on anything other than x86, but specifying a greater
alignment would be possible. I can't think of any useful optimizations which
would use that information, but maybe someone else has ideas.
Optimizer/codegen support coming soon.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136404 91177308-0d34-0410-b5e6-96231b3b80d8
* InvokeInst: Get the landingpad instruction associated with this invoke.
* LandingPadInst: A method to reserve extra space for clauses.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136325 91177308-0d34-0410-b5e6-96231b3b80d8
This is just a LangRef entry and reading/writing/memory representation; optimizer+codegen support coming soon.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136009 91177308-0d34-0410-b5e6-96231b3b80d8
errors like the one corrected by r135261. Migrate all LLVM callers of the old
constructor to the new one.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135431 91177308-0d34-0410-b5e6-96231b3b80d8
which was just replaceAllUsesWith without some assertions. It was
needed back when type refinement was alive.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135253 91177308-0d34-0410-b5e6-96231b3b80d8
of calling getAllMetadata(). This is semantically identical, but doing
it this way avoids unpacking the DebugLoc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135173 91177308-0d34-0410-b5e6-96231b3b80d8
an assert on Darwin llvm-gcc builds.
Assertion failed: (castIsValid(op, S, Ty) && "Invalid cast!"), function Create, file /Users/buildslave/zorg/buildbot/smooshlab/slave-0.8/build.llvm-gcc-i386-darwin9-RA/llvm.src/lib/VMCore/Instructions.cpp, li\
ne 2067.
etc.
http://smooshlab.apple.com:8013/builders/llvm-gcc-i386-darwin9-RA/builds/2354
--- Reverse-merging r134893 into '.':
U include/llvm/Target/TargetData.h
U include/llvm/DerivedTypes.h
U tools/bugpoint/ExtractFunction.cpp
U unittests/Support/TypeBuilderTest.cpp
U lib/Target/ARM/ARMGlobalMerge.cpp
U lib/Target/TargetData.cpp
U lib/VMCore/Constants.cpp
U lib/VMCore/Type.cpp
U lib/VMCore/Core.cpp
U lib/Transforms/Utils/CodeExtractor.cpp
U lib/Transforms/Instrumentation/ProfilingUtils.cpp
U lib/Transforms/IPO/DeadArgumentElimination.cpp
U lib/CodeGen/SjLjEHPrepare.cpp
--- Reverse-merging r134888 into '.':
G include/llvm/DerivedTypes.h
U include/llvm/Support/TypeBuilder.h
U include/llvm/Intrinsics.h
U unittests/Analysis/ScalarEvolutionTest.cpp
U unittests/ExecutionEngine/JIT/JITTest.cpp
U unittests/ExecutionEngine/JIT/JITMemoryManagerTest.cpp
U unittests/VMCore/PassManagerTest.cpp
G unittests/Support/TypeBuilderTest.cpp
U lib/Target/MBlaze/MBlazeIntrinsicInfo.cpp
U lib/Target/Blackfin/BlackfinIntrinsicInfo.cpp
U lib/VMCore/IRBuilder.cpp
G lib/VMCore/Type.cpp
U lib/VMCore/Function.cpp
G lib/VMCore/Core.cpp
U lib/VMCore/Module.cpp
U lib/AsmParser/LLParser.cpp
U lib/Transforms/Utils/CloneFunction.cpp
G lib/Transforms/Utils/CodeExtractor.cpp
U lib/Transforms/Utils/InlineFunction.cpp
U lib/Transforms/Instrumentation/GCOVProfiling.cpp
U lib/Transforms/Scalar/ObjCARC.cpp
U lib/Transforms/Scalar/SimplifyLibCalls.cpp
U lib/Transforms/Scalar/MemCpyOptimizer.cpp
G lib/Transforms/IPO/DeadArgumentElimination.cpp
U lib/Transforms/IPO/ArgumentPromotion.cpp
U lib/Transforms/InstCombine/InstCombineCompares.cpp
U lib/Transforms/InstCombine/InstCombineAndOrXor.cpp
U lib/Transforms/InstCombine/InstCombineCalls.cpp
U lib/CodeGen/DwarfEHPrepare.cpp
U lib/CodeGen/IntrinsicLowering.cpp
U lib/Bitcode/Reader/BitcodeReader.cpp
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134949 91177308-0d34-0410-b5e6-96231b3b80d8
patch brings numerous advantages to LLVM. One way to look at it
is through diffstat:
109 files changed, 3005 insertions(+), 5906 deletions(-)
Removing almost 3K lines of code is a good thing. Other advantages
include:
1. Value::getType() is a simple load that can be CSE'd, not a mutating
union-find operation.
2. Types a uniqued and never move once created, defining away PATypeHolder.
3. Structs can be "named" now, and their name is part of the identity that
uniques them. This means that the compiler doesn't merge them structurally
which makes the IR much less confusing.
4. Now that there is no way to get a cycle in a type graph without a named
struct type, "upreferences" go away.
5. Type refinement is completely gone, which should make LTO much MUCH faster
in some common cases with C++ code.
6. Types are now generally immutable, so we can use "Type *" instead
"const Type *" everywhere.
Downsides of this patch are that it removes some functions from the C API,
so people using those will have to upgrade to (not yet added) new API.
"LLVM 3.0" is the right time to do this.
There are still some cleanups pending after this, this patch is large enough
as-is.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134829 91177308-0d34-0410-b5e6-96231b3b80d8
"Reinstate r133435 and r133449 (reverted in r133499) now that the clang
self-hosted build failure has been fixed (r133512)."
Due to some additional warnings.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133700 91177308-0d34-0410-b5e6-96231b3b80d8
representing a constant reference to ValType. Normally this is just
"const ValType &", but when ValType is a std::vector we want to use
ArrayRef as the reference type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133611 91177308-0d34-0410-b5e6-96231b3b80d8
Change PHINodes to store simple pointers to their incoming basic blocks,
instead of full-blown Uses.
Note that this loses an optimization in SplitCriticalEdge(), because we
can no longer walk the use list of a BasicBlock to find phi nodes. See
the comment I removed starting "However, the foreach loop is slow for
blocks with lots of predecessors".
Extend replaceAllUsesWith() on a BasicBlock to also update any phi
nodes in the block's successors. This mimics what would have happened
when PHINodes were proper Users of their incoming blocks. (Note that
this only works if OldBB->replaceAllUsesWith(NewBB) is called when
OldBB still has a terminator instruction, so it still has some
successors.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133435 91177308-0d34-0410-b5e6-96231b3b80d8
Change various bits of code to make better use of the existing PHINode
API, to insulate them from forthcoming changes in how PHINodes store
their operands.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133434 91177308-0d34-0410-b5e6-96231b3b80d8
I don't think the AugmentedUse struct buys us much, either in
correctness or in ease of use. Ditch it, and simplify Use::getUser() and
User::allocHungoffUses().
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133433 91177308-0d34-0410-b5e6-96231b3b80d8
all over the place in different styles and variants. Standardize on two
preferred entrypoints: one that takes a StructType and ArrayRef, and one that
takes StructType and varargs.
In cases where there isn't a struct type convenient, we now add a
ConstantStruct::getAnon method (whose name will make more sense after a few
more patches land).
It would be "really really nice" if the ConstantStruct::get and
ConstantVector::get methods didn't make temporary std::vectors.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133412 91177308-0d34-0410-b5e6-96231b3b80d8
for pre-2.9 bitcode files. We keep x86 unaligned loads, movnt, crc32, and the
target indep prefetch change.
As usual, updating the testsuite is a PITA.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133337 91177308-0d34-0410-b5e6-96231b3b80d8
optimizations when emitting calls to the function; instead those calls may
use faster relocations which require the function to be immediately resolved
upon loading the dynamic object featuring the call. This is useful when it
is known that the function will be called frequently and pervasively and
therefore there is no merit in delaying binding of the function.
Currently only implemented for x86-64, where it turns into a call through
the global offset table.
Patch by Dan Gohman, who assures me that he's going to add LangRef documentation
for this once it's committed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133080 91177308-0d34-0410-b5e6-96231b3b80d8
Unfortunately we can't follow what the rest of the language does (wrapping it
in double-quotes) because that would cause an ambiguity with metadata strings,
so instead we escape any unusual characters with \xx escaping.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133050 91177308-0d34-0410-b5e6-96231b3b80d8
Added asserts whenever attempting to use a potentially
uninitialized pass. This helps people trying to develop a new pass and
people trying to understand the bug reports filed by the former people.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@132520 91177308-0d34-0410-b5e6-96231b3b80d8
fixes aliasing issues with the old and new names as well as adds test
cases for the auto-upgrader.
Fixes rdar 9472944.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@132207 91177308-0d34-0410-b5e6-96231b3b80d8
crc32.[8|16|32] have been renamed to .crc32.32.[8|16|32] and
crc64.[8|16|32] have been renamed to .crc32.64.[8|64].
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@132163 91177308-0d34-0410-b5e6-96231b3b80d8
LTO friendly as we can now correctly merge files compiled with or without
-fasynchronous-unwind-tables.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@132033 91177308-0d34-0410-b5e6-96231b3b80d8
than either the primitive size or the element primitive size (in the case
of vectors), simplify the vector logic. No functionality change. There
is some distracting churn in the patch because I lined up comments better
while there - sorry about that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@131533 91177308-0d34-0410-b5e6-96231b3b80d8
happily accept things like "sext <2 x i32> to <999 x i64>". It would
also accept "sext <2 x i32> to i64", though the verifier would catch
that later. Fixed by having castIsValid check that vector lengths match
except when doing a bitcast. (2) When creating a cast instruction, check
that the cast is valid (this was already done when creating constexpr
casts). While there, replace getScalarSizeInBits (used to allow more
vector casts) with getPrimitiveSizeInBits in getCastOpcode and isCastable
since vector to vector casts are now handled explicitly by passing to the
element types; i.e. this bit should result in no functional change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@131532 91177308-0d34-0410-b5e6-96231b3b80d8
can be used to turn a <4 x i64> into a <4 x i32> but getCastOpcode would assert
if you passed these types to it. Note that this strictly extends the previous
functionality: if getCastOpcode previously accepted two vector types (i.e. didn't
assert) then it still will and returns the same opcode (BitCast). That's because
before it would only accept vectors with the same bitwidth, and the new code only
touches vectors with the same length. However if two vectors have both the same
bitwidth and the same length then their element types have the same bitwidth, so
the new logic will return BitCast as before.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@131530 91177308-0d34-0410-b5e6-96231b3b80d8
Still to do:
- Allow replacing / removing passes (infrastructure there, just needs an infrastructure exposed)
- Defining sets of passes to be added or removed as a group
- Extending the support to allow user-defined groups of optimisations
- Allow plugins to be specified for loading automatically (e.g. from plugins.conf or some similar mechanism)
Reviewed by Nick Lewycky.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@131155 91177308-0d34-0410-b5e6-96231b3b80d8
Now that we have a first-class way to represent unaligned loads, the unaligned
load intrinsics are superfluous.
First part of <rdar://problem/8460511>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@129401 91177308-0d34-0410-b5e6-96231b3b80d8
--- Reverse-merging r129235 into '.':
D test/Feature/bb_attrs.ll
U include/llvm/BasicBlock.h
U include/llvm/Bitcode/LLVMBitCodes.h
U lib/VMCore/AsmWriter.cpp
U lib/VMCore/BasicBlock.cpp
U lib/AsmParser/LLParser.cpp
U lib/AsmParser/LLLexer.cpp
U lib/AsmParser/LLToken.h
U lib/Bitcode/Reader/BitcodeReader.cpp
U lib/Bitcode/Writer/BitcodeWriter.cpp
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@129259 91177308-0d34-0410-b5e6-96231b3b80d8
* Add a "landing pad" attribute to the BasicBlock.
* Modify the bitcode reader and writer to handle said attribute.
Later: The verifier will ensure that the landing pad attribute is used in the
appropriate manner. I.e., not applied to the entry block, and applied only to
basic blocks that are branched to via a `dispatch' instruction.
(This is a work-in-progress.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@129235 91177308-0d34-0410-b5e6-96231b3b80d8
