that use the Mach::linkedit_data_command type for the load commands that are
currently used in the MachOObjectFile constructor.
This contains the missing checks for LC_DATA_IN_CODE and
LC_LINKER_OPTIMIZATION_HINT load commands and the fields for the
Mach::linkedit_data_command type. Checking for other load commands that
use this type will be added later.
Also fixed a couple of places that was using sizeof(MachOObjectFile::LoadCommandInfo)
that should have been using sizeof(MachO::load_command).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@280267 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: This change fix bug in AMDGPU disassembly. Previously, presence of symbols other than kernel symbols caused objdump to skip begining of those symbols.
Reviewers: tstellarAMD, vpykhtin, Bigcheese, ruiu
Subscribers: kzhuravl, arsenm
Differential Revision: http://reviews.llvm.org/D21966
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@278921 91177308-0d34-0410-b5e6-96231b3b80d8
This contains the two missing checks for LC_SEGMENT load command fields.
And checks for the Mach-O sections fields that would make them invalid.
With the new checks, some of the existing malformed file checks now trips one
of these instead of the issue it was having before so those tests were adjusted.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@278557 91177308-0d34-0410-b5e6-96231b3b80d8
This is where an LC_SEGMENT load command has a fileoff field that
extends past the end of the file.
Also fix llvm-nm and llvm-size to remove the errorToErrorCode() call so error messages are printed.
And needed to update a few test cases now that they do print the error messages just a
bit differently.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@277845 91177308-0d34-0410-b5e6-96231b3b80d8
and its clients to use the new llvm::Error model for error handling.
Changed getAsArchive() from ErrorOr<...> to Expected<...> so now all
interfaces there use the new llvm::Error model for return values.
In the two places it had if (!Parent) this is actually a program error so changed
from returning errorCodeToError(object_error::parse_failed) to calling
report_fatal_error() with a message.
In getObjectForArch() added error messages to its two llvm::Error return values
instead of returning errorCodeToError(object_error::arch_not_found) with no
error message.
For the llvm-obdump, llvm-nm and llvm-size clients since the only binary files in
Mach-O Universal Binaries that are supported are Mach-O files or archives with
Mach-O objects, updated their logic to generate an error when a slice contains
something like an ELF binary instead of ignoring it. And added a test case for
that.
The last error stuff to be cleaned up for libObject’s MachOUniversalBinary is
the use of errorOrToExpected(Archive::create(ObjBuffer)) which needs
Archive::create() to be changed from ErrorOr<...> to Expected<...> first,
which I’ll work on next.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@274079 91177308-0d34-0410-b5e6-96231b3b80d8
allow a good error message to be produced.
I added the one test case that the object file tools could produce an error
message. The other two errors can’t be triggered if the input file is passed
through sys::fs::identify_magic(). But the malformedError("bad magic number")
does get triggered by the logic in llvm-dsymutil when dealing with a normal
Mach-O file. The other "File too small ..." error would take a logic error
currently to produce and is not tested for.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@273946 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Our YAML library's handling of tags isn't perfect, but it is good enough to get rid of the need for the --format argument to yaml2obj. This patch does exactly that.
Instead of requiring --format, it infers the format based on the tags found in the object file. The supported tags are:
!ELF
!COFF
!mach-o
!fat-mach-o
I have a corresponding patch that is quite large that fixes up all the in-tree test cases.
Reviewers: rafael, Bigcheese, compnerd, silvas
Subscribers: compnerd, llvm-commits
Differential Revision: http://reviews.llvm.org/D21711
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@273915 91177308-0d34-0410-b5e6-96231b3b80d8
Darwin added support in its Xcode 8.0 tools (released in the beta) for universal
files where offsets and sizes for the objects are 64-bits to allow support for
objects contained in universal files to be larger then 4gb. The change is very
straight forward. There is a new magic number that differs by one bit, much
like the 64-bit Mach-O files. Then there is a new structure that follow the
fat_header that has the same layout but with the offset and size fields using
64-bit values instead of 32-bit values.
rdar://26899493
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@273207 91177308-0d34-0410-b5e6-96231b3b80d8
Darwin added support in its Xcode 8.0 tools (released in the beta) for static
library table of contents with 64-bit offsets to the archive members. The
change is very straight forward. The table of contents member is named
___.SYMDEF_64 or "___.SYMDEF_64 SORTED" and same layout is used but with
fields using 64 bit values instead of 32 bit values.
rdar://26869808
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@273058 91177308-0d34-0410-b5e6-96231b3b80d8
The -mattr options in these four tests have no effect on the output of
llvm-objdump. In the case of the two Mips tests, removing the -mattr option
left duplicate RUN lines so the duplicates have been removed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272906 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The Mips implementation only covers the feature bits described by the ELF
e_flags so far. Mips stores additional feature bits such as MSA in the
.MIPS.abiflags section.
Also fixed a small bug this revealed where microMIPS wouldn't add the
EF_MIPS_MICROMIPS flag when using -filetype=obj.
Reviewers: echristo, rafael
Subscribers: rafael, mehdi_amini, dsanders, sdardis, llvm-commits
Differential Revision: http://reviews.llvm.org/D21125
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272880 91177308-0d34-0410-b5e6-96231b3b80d8
when the object is from a slice of a Mach-O Universal Binary use something like
"foo.o (for architecture i386)" as part of the error message when expected.
Also fixed places in these tools that were ignoring object file errors from
MachOUniversalBinary::getAsObjectFile() when the code moved on to see if
the slice was an archive.
To do this MachOUniversalBinary::getAsObjectFile() and
MachOUniversalBinary::getObjectForArch() were changed from returning
ErrorOr<...> to Expected<...> then that was threaded up to its users.
Converting these interfaces to Expected<> from ErrorOr<> does involve
touching a number of places. To contain the changes for now the use of
errorToErrorCode() is still used in two places yet to be fully converted.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@271332 91177308-0d34-0410-b5e6-96231b3b80d8
This is a support COFF feature. Ensure that we can display the weak externals
auxiliary symbol. It contains useful information (such as the default binding
and how to resolve the symbol).
This reapplies the previous patch with a modification which hopefully should fix
the endianness issues. The variadic call would promote the ulittle32_t to a
uint32_t which would lose the byte-swapping behaviour desired.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@270813 91177308-0d34-0410-b5e6-96231b3b80d8
This is a support COFF feature. Ensure that we can display the weak externals
auxiliary symbol. It contains useful information (such as the default binding
and how to resolve the symbol).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@270648 91177308-0d34-0410-b5e6-96231b3b80d8
when the object is in an archive to use something like libx.a(foo.o) as part of
the error message.
Also changed llvm-objdump and llvm-size to be like llvm-nm and ignore non-object
files in archives and not produce any error message.
To do this Archive::Child::getAsBinary() was changed from ErrorOr<...> to
Expected<...> then that was threaded up to its users.
Converting this interface to Expected<> from ErrorOr<> does involve
touching a number of places. To contain the changes for now the use of
errorToErrorCode() is still used in one place yet to be fully converted.
Again there some were bugs in the existing code that did not deal with the
old ErrorOr<> return values. So now with Expected<> since they must be
checked and the error handled, I added a TODO and a comments for those.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@269784 91177308-0d34-0410-b5e6-96231b3b80d8
load commands.
The existing test case in test/Object/macho-invalid.test for
macho-invalid-too-small-segment-load-command has a cmdsize of 55, while
being too small also it is not a multiple of 4. So when that check is added
this test case will produce a different error. So I constructed a new test case
that will trigger the intended error.
I also changed the error message to be consistent with the other malformed Mach-O
file error messages which prints the load command index. I also removed both
object_error::macho_load_segment_too_small and
object_error::macho_load_segment_too_many_sections from Object/Error.h
as they are not needed and can just use object_error::parse_failed and let the
error message string distinguish the specific error.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@268652 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Version 2 is now the default. If you want to emit version 1, use
the amdgcn--amdhsa-amdcov1 triple.
Reviewers: arsenm, kzhuravl
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D19283
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@268647 91177308-0d34-0410-b5e6-96231b3b80d8
command has a size less than 8 bytes.
I think the existing test case in test/Object/macho-invalid.test for
macho64-invalid-too-small-load-command was trying to test for this but that
test case triggered a different error given how it was constructed. So I
constructed a new test case that would trigger this specific error.
I also changed the error message to be consistent with the other malformed Mach-O
file error messages. I also removed object_error::macho_small_load_command from
Object/Error.h as it is not needed and can just use object_error::parse_failed
and let the error message string distinguish the error.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@268463 91177308-0d34-0410-b5e6-96231b3b80d8
command other than the first one is past the end of the load commands.
This is like the test case in test/Object/macho-invalid.test for
macho64-invalid-incomplete-load-command but it is the second load command
that is past the end of all the load commands instead of the first.
The code in the constructor for MachOObjectFile that loops over the load
commands used getNextLoadCommandInfo() which was not producing
a good error message. So that was fixed and a test case was added.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@268403 91177308-0d34-0410-b5e6-96231b3b80d8
Produce another specific error message for a malformed Mach-O file when a symbol’s
section index is more than the number of sections. The existing test case in test/Object/macho-invalid.test
for macho-invalid-section-index-getSectionRawName now reports the error with the message indicating
that a symbol at a specific index has a bad section index and that bad section index value.
Again converting interfaces to Expected<> from ErrorOr<> does involve
touching a number of places. Where the existing code reported the error with a
string message or an error code it was converted to do the same.
Also there some were bugs in the existing code that did not deal with the
old ErrorOr<> return values. So now with Expected<> since they must be
checked and the error handled, I added a TODO and a comment:
"// TODO: Actually report errors helpfully" and a call something like
consumeError(NameOrErr.takeError()) so the buggy code will not crash
since needed to deal with the Error.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@268298 91177308-0d34-0410-b5e6-96231b3b80d8
Produce another specific error message for a malformed Mach-O file when a symbol’s
string index is past the end of the string table. The existing test case in test/Object/macho-invalid.test
for macho-invalid-symbol-name-past-eof now reports the error with the message indicating
that a symbol at a specific index has a bad sting index and that bad string index value.
Again converting interfaces to Expected<> from ErrorOr<> does involve
touching a number of places. Where the existing code reported the error with a
string message or an error code it was converted to do the same. There is some
code for this that could be factored into a routine but I would like to leave that for
the code owners post-commit to do as they want for handling an llvm::Error. An
example of how this could be done is shown in the diff in
lib/ExecutionEngine/RuntimeDyld/RuntimeDyldImpl.h which had a Check() routine
already for std::error_code so I added one like it for llvm::Error .
Also there some were bugs in the existing code that did not deal with the
old ErrorOr<> return values. So now with Expected<> since they must be
checked and the error handled, I added a TODO and a comment:
“// TODO: Actually report errors helpfully” and a call something like
consumeError(NameOrErr.takeError()) so the buggy code will not crash
since needed to deal with the Error.
Note there fixes needed to lld that goes along with this that I will commit right after this.
So expect lld not to built after this commit and before the next one.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@266919 91177308-0d34-0410-b5e6-96231b3b80d8
And update the existing test cases in test/Object/macho-invalid.test
to use llvm-objdump with the -macho option to produce these
error messages and stop producing the generic "Invalid data
was encountered while parsing the file" message.
Working from the beginning of the file, if the mach header is too large for
the size of the file and then if the load commands that follow extend past
the end of the file these two errors now generate correct error messages.
Both of these have existing test cases in test/Object/macho-invalid.test .
But the first with macho-invalid-header it will never trigger the error message
"mach header extends past the end of the file" using any of the llvm tools as
they all use identify_magic() which rejects files with the correct magic number
that are too small in size. So I tested this by hacking that code and seeing the
error message down in parseHeader() really does happen. So in case there
is ever code in llvm that directly calls createMachOObjectFile() this error
message will be correctly produced.
The second error message of "load commands extends past the end of the file"
is triggered by a number of existing tests cases in test/Object/macho-invalid.test .
Also other tests trigger different error messages now like "ilocalsym plus
nlocalsym in LC_DYSYMTAB load command extends past the end of the
symbol table".
There are two existing test cases that still get the "Invalid data was encountered ..."
error messages that I will tackle next. But they will involve a bit of pluming an
Expect<...> up through the call stack and I want to do those as separate changes.
FYI, for those test cases that were trying to test specific errors that now get
different errors I’ll fix those in follow on changes and create new test cases
for those so they test the error they were meant to test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@266248 91177308-0d34-0410-b5e6-96231b3b80d8
Reenable reverted r265550 with endianness issue fixed. Variables of
endian-aware types such as ulittle32_t should be explicitly casted
to their natural equivalent types before passing it as vararg to
printf like functions (format in my case). Added lit config file
depending on AMDGPU target as the testcase uses assembler.
Differential revision: http://reviews.llvm.org/D16998
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@265645 91177308-0d34-0410-b5e6-96231b3b80d8
Produce the first specific error message for a malformed Mach-O file describing
the problem instead of the generic message for object_error::parse_failed of
"Invalid data was encountered while parsing the file”. Many more good error
messages will follow after this first one.
This is built on Lang Hames’ great work of adding the ’Error' class for
structured error handling and threading Error through MachOObjectFile
construction. And making createMachOObjectFile return Expected<...> .
So to to get the error to the llvm-obdump tool, I changed the stack of
these methods to also return Expected<...> :
object::ObjectFile::createObjectFile()
object::SymbolicFile::createSymbolicFile()
object::createBinary()
Then finally in ParseInputMachO() in MachODump.cpp the error can
be reported and the specific error message can be printed in llvm-objdump
and can be seen in the existing test case for the existing malformed binary
but with the updated error message.
Converting these interfaces to Expected<> from ErrorOr<> does involve
touching a number of places. To contain the changes for now use of
errorToErrorCode() and errorOrToExpected() are used where the callers
are yet to be converted.
Also there some were bugs in the existing code that did not deal with the
old ErrorOr<> return values. So now with Expected<> since they must be
checked and the error handled, I added a TODO and a comment:
“// TODO: Actually report errors helpfully” and a call something like
consumeError(ObjOrErr.takeError()) so the buggy code will not crash
since needed to deal with the Error.
Note there is one fix also needed to lld/COFF/InputFiles.cpp that goes along
with this that I will commit right after this. So expect lld not to built
after this commit and before the next one.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@265606 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r265550. There're problems with endianness on dumping instruction bytes. Need to find out how to use support::ulittle32_t type properly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@265554 91177308-0d34-0410-b5e6-96231b3b80d8
in the test suite. While this is not really an interesting tool and option to run
on a Mach-O file to show the symbol table in a generic libObject format
it shouldn’t crash.
The reason for the crash was in MachOObjectFile::getSymbolType() when it was
calling MachOObjectFile::getSymbolSection() without checking its return value
for the error case.
What makes this fix require a fair bit of diffs is that the method getSymbolType() is
in the class ObjectFile defined without an ErrorOr<> so I needed to add that all
the sub classes. And all of the uses needed to be updated and the return value
needed to be checked for the error case.
The MachOObjectFile version of getSymbolType() “can” get an error in trying to
come up with the libObject’s internal SymbolRef::Type when the Mach-O symbol
symbol type is an N_SECT type because the code is trying to select from the
SymbolRef::ST_Data or SymbolRef::ST_Function values for the SymbolRef::Type.
And it needs the Mach-O section to use isData() and isBSS to determine if
it will return SymbolRef::ST_Data.
One other possible fix I considered is to simply return SymbolRef::ST_Other
when MachOObjectFile::getSymbolSection() returned an error. But since in
the past when I did such changes that “ate an error in the libObject code” I
was asked instead to push the error out of the libObject code I chose not
to implement the fix this way.
As currently written both the COFF and ELF versions of getSymbolType()
can’t get an error. But if isReservedSectionNumber() wanted to check for
the two known negative values rather than allowing all negative values or
the code wanted to add the same check as in getSymbolAddress() to use
getSection() and check for the error then these versions of getSymbolType()
could return errors.
At the end of the day the error printed now is the generic “Invalid data was
encountered while parsing the file” for object_error::parse_failed. In the
future when we thread Lang’s new TypedError for recoverable error handling
though libObject this will improve. And where the added // Diagnostic(…
comment is, it would be changed to produce and error message
like “bad section index (42) for symbol at index 8” for this case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@264187 91177308-0d34-0410-b5e6-96231b3b80d8
