mirror of
https://github.com/RPCSX/llvm.git
synced 2024-12-12 14:17:59 +00:00
48575f6ea7
difficult on current ARM implementations for a few reasons. 1. Even though a single vmla has latency that is one cycle shorter than a pair of vmul + vadd, a RAW hazard during the first (4? on Cortex-a8) can cause additional pipeline stall. So it's frequently better to single codegen vmul + vadd. 2. A vmla folowed by a vmul, vmadd, or vsub causes the second fp instruction to stall for 4 cycles. We need to schedule them apart. 3. A vmla followed vmla is a special case. Obvious issuing back to back RAW vmla + vmla is very bad. But this isn't ideal either: vmul vadd vmla Instead, we want to expand the second vmla: vmla vmul vadd Even with the 4 cycle vmul stall, the second sequence is still 2 cycles faster. Up to now, isel simply avoid codegen'ing fp vmla / vmls. This works well enough but it isn't the optimial solution. This patch attempts to make it possible to use vmla / vmls in cases where it is profitable. A. Add missing isel predicates which cause vmla to be codegen'ed. B. Make sure the fmul in (fadd (fmul)) has a single use. We don't want to compute a fmul and a fmla. C. Add additional isel checks for vmla, avoid cases where vmla is feeding into fp instructions (except for the #3 exceptional case). D. Add ARM hazard recognizer to model the vmla / vmls hazards. E. Add a special pre-regalloc case to expand vmla / vmls when it's likely the vmla / vmls will trigger one of the special hazards. Work in progress, only A+B are enabled. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@120960 91177308-0d34-0410-b5e6-96231b3b80d8
617 lines
20 KiB
C++
617 lines
20 KiB
C++
//===- Thumb2InstrInfo.cpp - Thumb-2 Instruction Information ----*- C++ -*-===//
|
|
//
|
|
// The LLVM Compiler Infrastructure
|
|
//
|
|
// This file is distributed under the University of Illinois Open Source
|
|
// License. See LICENSE.TXT for details.
|
|
//
|
|
//===----------------------------------------------------------------------===//
|
|
//
|
|
// This file contains the Thumb-2 implementation of the TargetInstrInfo class.
|
|
//
|
|
//===----------------------------------------------------------------------===//
|
|
|
|
#include "Thumb2InstrInfo.h"
|
|
#include "ARM.h"
|
|
#include "ARMConstantPoolValue.h"
|
|
#include "ARMAddressingModes.h"
|
|
#include "ARMGenInstrInfo.inc"
|
|
#include "ARMMachineFunctionInfo.h"
|
|
#include "Thumb2InstrInfo.h"
|
|
#include "llvm/CodeGen/MachineFrameInfo.h"
|
|
#include "llvm/CodeGen/MachineInstrBuilder.h"
|
|
#include "llvm/CodeGen/MachineMemOperand.h"
|
|
#include "llvm/CodeGen/PseudoSourceValue.h"
|
|
#include "llvm/ADT/SmallVector.h"
|
|
#include "llvm/Support/CommandLine.h"
|
|
|
|
using namespace llvm;
|
|
|
|
static cl::opt<bool>
|
|
OldT2IfCvt("old-thumb2-ifcvt", cl::Hidden,
|
|
cl::desc("Use old-style Thumb2 if-conversion heuristics"),
|
|
cl::init(false));
|
|
|
|
Thumb2InstrInfo::Thumb2InstrInfo(const ARMSubtarget &STI)
|
|
: ARMBaseInstrInfo(STI), RI(*this, STI) {
|
|
}
|
|
|
|
unsigned Thumb2InstrInfo::getUnindexedOpcode(unsigned Opc) const {
|
|
// FIXME
|
|
return 0;
|
|
}
|
|
|
|
void
|
|
Thumb2InstrInfo::ReplaceTailWithBranchTo(MachineBasicBlock::iterator Tail,
|
|
MachineBasicBlock *NewDest) const {
|
|
MachineBasicBlock *MBB = Tail->getParent();
|
|
ARMFunctionInfo *AFI = MBB->getParent()->getInfo<ARMFunctionInfo>();
|
|
if (!AFI->hasITBlocks()) {
|
|
TargetInstrInfoImpl::ReplaceTailWithBranchTo(Tail, NewDest);
|
|
return;
|
|
}
|
|
|
|
// If the first instruction of Tail is predicated, we may have to update
|
|
// the IT instruction.
|
|
unsigned PredReg = 0;
|
|
ARMCC::CondCodes CC = llvm::getInstrPredicate(Tail, PredReg);
|
|
MachineBasicBlock::iterator MBBI = Tail;
|
|
if (CC != ARMCC::AL)
|
|
// Expecting at least the t2IT instruction before it.
|
|
--MBBI;
|
|
|
|
// Actually replace the tail.
|
|
TargetInstrInfoImpl::ReplaceTailWithBranchTo(Tail, NewDest);
|
|
|
|
// Fix up IT.
|
|
if (CC != ARMCC::AL) {
|
|
MachineBasicBlock::iterator E = MBB->begin();
|
|
unsigned Count = 4; // At most 4 instructions in an IT block.
|
|
while (Count && MBBI != E) {
|
|
if (MBBI->isDebugValue()) {
|
|
--MBBI;
|
|
continue;
|
|
}
|
|
if (MBBI->getOpcode() == ARM::t2IT) {
|
|
unsigned Mask = MBBI->getOperand(1).getImm();
|
|
if (Count == 4)
|
|
MBBI->eraseFromParent();
|
|
else {
|
|
unsigned MaskOn = 1 << Count;
|
|
unsigned MaskOff = ~(MaskOn - 1);
|
|
MBBI->getOperand(1).setImm((Mask & MaskOff) | MaskOn);
|
|
}
|
|
return;
|
|
}
|
|
--MBBI;
|
|
--Count;
|
|
}
|
|
|
|
// Ctrl flow can reach here if branch folding is run before IT block
|
|
// formation pass.
|
|
}
|
|
}
|
|
|
|
bool
|
|
Thumb2InstrInfo::isLegalToSplitMBBAt(MachineBasicBlock &MBB,
|
|
MachineBasicBlock::iterator MBBI) const {
|
|
unsigned PredReg = 0;
|
|
return llvm::getITInstrPredicate(MBBI, PredReg) == ARMCC::AL;
|
|
}
|
|
|
|
void Thumb2InstrInfo::copyPhysReg(MachineBasicBlock &MBB,
|
|
MachineBasicBlock::iterator I, DebugLoc DL,
|
|
unsigned DestReg, unsigned SrcReg,
|
|
bool KillSrc) const {
|
|
// Handle SPR, DPR, and QPR copies.
|
|
if (!ARM::GPRRegClass.contains(DestReg, SrcReg))
|
|
return ARMBaseInstrInfo::copyPhysReg(MBB, I, DL, DestReg, SrcReg, KillSrc);
|
|
|
|
bool tDest = ARM::tGPRRegClass.contains(DestReg);
|
|
bool tSrc = ARM::tGPRRegClass.contains(SrcReg);
|
|
unsigned Opc = ARM::tMOVgpr2gpr;
|
|
if (tDest && tSrc)
|
|
Opc = ARM::tMOVr;
|
|
else if (tSrc)
|
|
Opc = ARM::tMOVtgpr2gpr;
|
|
else if (tDest)
|
|
Opc = ARM::tMOVgpr2tgpr;
|
|
|
|
BuildMI(MBB, I, DL, get(Opc), DestReg)
|
|
.addReg(SrcReg, getKillRegState(KillSrc));
|
|
}
|
|
|
|
void Thumb2InstrInfo::
|
|
storeRegToStackSlot(MachineBasicBlock &MBB, MachineBasicBlock::iterator I,
|
|
unsigned SrcReg, bool isKill, int FI,
|
|
const TargetRegisterClass *RC,
|
|
const TargetRegisterInfo *TRI) const {
|
|
if (RC == ARM::GPRRegisterClass || RC == ARM::tGPRRegisterClass ||
|
|
RC == ARM::tcGPRRegisterClass || RC == ARM::rGPRRegisterClass) {
|
|
DebugLoc DL;
|
|
if (I != MBB.end()) DL = I->getDebugLoc();
|
|
|
|
MachineFunction &MF = *MBB.getParent();
|
|
MachineFrameInfo &MFI = *MF.getFrameInfo();
|
|
MachineMemOperand *MMO =
|
|
MF.getMachineMemOperand(
|
|
MachinePointerInfo(PseudoSourceValue::getFixedStack(FI)),
|
|
MachineMemOperand::MOStore,
|
|
MFI.getObjectSize(FI),
|
|
MFI.getObjectAlignment(FI));
|
|
AddDefaultPred(BuildMI(MBB, I, DL, get(ARM::t2STRi12))
|
|
.addReg(SrcReg, getKillRegState(isKill))
|
|
.addFrameIndex(FI).addImm(0).addMemOperand(MMO));
|
|
return;
|
|
}
|
|
|
|
ARMBaseInstrInfo::storeRegToStackSlot(MBB, I, SrcReg, isKill, FI, RC, TRI);
|
|
}
|
|
|
|
void Thumb2InstrInfo::
|
|
loadRegFromStackSlot(MachineBasicBlock &MBB, MachineBasicBlock::iterator I,
|
|
unsigned DestReg, int FI,
|
|
const TargetRegisterClass *RC,
|
|
const TargetRegisterInfo *TRI) const {
|
|
if (RC == ARM::GPRRegisterClass || RC == ARM::tGPRRegisterClass ||
|
|
RC == ARM::tcGPRRegisterClass || RC == ARM::rGPRRegisterClass) {
|
|
DebugLoc DL;
|
|
if (I != MBB.end()) DL = I->getDebugLoc();
|
|
|
|
MachineFunction &MF = *MBB.getParent();
|
|
MachineFrameInfo &MFI = *MF.getFrameInfo();
|
|
MachineMemOperand *MMO =
|
|
MF.getMachineMemOperand(
|
|
MachinePointerInfo(PseudoSourceValue::getFixedStack(FI)),
|
|
MachineMemOperand::MOLoad,
|
|
MFI.getObjectSize(FI),
|
|
MFI.getObjectAlignment(FI));
|
|
AddDefaultPred(BuildMI(MBB, I, DL, get(ARM::t2LDRi12), DestReg)
|
|
.addFrameIndex(FI).addImm(0).addMemOperand(MMO));
|
|
return;
|
|
}
|
|
|
|
ARMBaseInstrInfo::loadRegFromStackSlot(MBB, I, DestReg, FI, RC, TRI);
|
|
}
|
|
|
|
void llvm::emitT2RegPlusImmediate(MachineBasicBlock &MBB,
|
|
MachineBasicBlock::iterator &MBBI, DebugLoc dl,
|
|
unsigned DestReg, unsigned BaseReg, int NumBytes,
|
|
ARMCC::CondCodes Pred, unsigned PredReg,
|
|
const ARMBaseInstrInfo &TII) {
|
|
bool isSub = NumBytes < 0;
|
|
if (isSub) NumBytes = -NumBytes;
|
|
|
|
// If profitable, use a movw or movt to materialize the offset.
|
|
// FIXME: Use the scavenger to grab a scratch register.
|
|
if (DestReg != ARM::SP && DestReg != BaseReg &&
|
|
NumBytes >= 4096 &&
|
|
ARM_AM::getT2SOImmVal(NumBytes) == -1) {
|
|
bool Fits = false;
|
|
if (NumBytes < 65536) {
|
|
// Use a movw to materialize the 16-bit constant.
|
|
BuildMI(MBB, MBBI, dl, TII.get(ARM::t2MOVi16), DestReg)
|
|
.addImm(NumBytes)
|
|
.addImm((unsigned)Pred).addReg(PredReg);
|
|
Fits = true;
|
|
} else if ((NumBytes & 0xffff) == 0) {
|
|
// Use a movt to materialize the 32-bit constant.
|
|
BuildMI(MBB, MBBI, dl, TII.get(ARM::t2MOVTi16), DestReg)
|
|
.addReg(DestReg)
|
|
.addImm(NumBytes >> 16)
|
|
.addImm((unsigned)Pred).addReg(PredReg);
|
|
Fits = true;
|
|
}
|
|
|
|
if (Fits) {
|
|
if (isSub) {
|
|
BuildMI(MBB, MBBI, dl, TII.get(ARM::t2SUBrr), DestReg)
|
|
.addReg(BaseReg, RegState::Kill)
|
|
.addReg(DestReg, RegState::Kill)
|
|
.addImm((unsigned)Pred).addReg(PredReg).addReg(0);
|
|
} else {
|
|
BuildMI(MBB, MBBI, dl, TII.get(ARM::t2ADDrr), DestReg)
|
|
.addReg(DestReg, RegState::Kill)
|
|
.addReg(BaseReg, RegState::Kill)
|
|
.addImm((unsigned)Pred).addReg(PredReg).addReg(0);
|
|
}
|
|
return;
|
|
}
|
|
}
|
|
|
|
while (NumBytes) {
|
|
unsigned ThisVal = NumBytes;
|
|
unsigned Opc = 0;
|
|
if (DestReg == ARM::SP && BaseReg != ARM::SP) {
|
|
// mov sp, rn. Note t2MOVr cannot be used.
|
|
BuildMI(MBB, MBBI, dl, TII.get(ARM::tMOVgpr2gpr),DestReg).addReg(BaseReg);
|
|
BaseReg = ARM::SP;
|
|
continue;
|
|
}
|
|
|
|
bool HasCCOut = true;
|
|
if (BaseReg == ARM::SP) {
|
|
// sub sp, sp, #imm7
|
|
if (DestReg == ARM::SP && (ThisVal < ((1 << 7)-1) * 4)) {
|
|
assert((ThisVal & 3) == 0 && "Stack update is not multiple of 4?");
|
|
Opc = isSub ? ARM::tSUBspi : ARM::tADDspi;
|
|
// FIXME: Fix Thumb1 immediate encoding.
|
|
BuildMI(MBB, MBBI, dl, TII.get(Opc), DestReg)
|
|
.addReg(BaseReg).addImm(ThisVal/4);
|
|
NumBytes = 0;
|
|
continue;
|
|
}
|
|
|
|
// sub rd, sp, so_imm
|
|
Opc = isSub ? ARM::t2SUBrSPi : ARM::t2ADDrSPi;
|
|
if (ARM_AM::getT2SOImmVal(NumBytes) != -1) {
|
|
NumBytes = 0;
|
|
} else {
|
|
// FIXME: Move this to ARMAddressingModes.h?
|
|
unsigned RotAmt = CountLeadingZeros_32(ThisVal);
|
|
ThisVal = ThisVal & ARM_AM::rotr32(0xff000000U, RotAmt);
|
|
NumBytes &= ~ThisVal;
|
|
assert(ARM_AM::getT2SOImmVal(ThisVal) != -1 &&
|
|
"Bit extraction didn't work?");
|
|
}
|
|
} else {
|
|
assert(DestReg != ARM::SP && BaseReg != ARM::SP);
|
|
Opc = isSub ? ARM::t2SUBri : ARM::t2ADDri;
|
|
if (ARM_AM::getT2SOImmVal(NumBytes) != -1) {
|
|
NumBytes = 0;
|
|
} else if (ThisVal < 4096) {
|
|
Opc = isSub ? ARM::t2SUBri12 : ARM::t2ADDri12;
|
|
HasCCOut = false;
|
|
NumBytes = 0;
|
|
} else {
|
|
// FIXME: Move this to ARMAddressingModes.h?
|
|
unsigned RotAmt = CountLeadingZeros_32(ThisVal);
|
|
ThisVal = ThisVal & ARM_AM::rotr32(0xff000000U, RotAmt);
|
|
NumBytes &= ~ThisVal;
|
|
assert(ARM_AM::getT2SOImmVal(ThisVal) != -1 &&
|
|
"Bit extraction didn't work?");
|
|
}
|
|
}
|
|
|
|
// Build the new ADD / SUB.
|
|
MachineInstrBuilder MIB =
|
|
AddDefaultPred(BuildMI(MBB, MBBI, dl, TII.get(Opc), DestReg)
|
|
.addReg(BaseReg, RegState::Kill)
|
|
.addImm(ThisVal));
|
|
if (HasCCOut)
|
|
AddDefaultCC(MIB);
|
|
|
|
BaseReg = DestReg;
|
|
}
|
|
}
|
|
|
|
static unsigned
|
|
negativeOffsetOpcode(unsigned opcode)
|
|
{
|
|
switch (opcode) {
|
|
case ARM::t2LDRi12: return ARM::t2LDRi8;
|
|
case ARM::t2LDRHi12: return ARM::t2LDRHi8;
|
|
case ARM::t2LDRBi12: return ARM::t2LDRBi8;
|
|
case ARM::t2LDRSHi12: return ARM::t2LDRSHi8;
|
|
case ARM::t2LDRSBi12: return ARM::t2LDRSBi8;
|
|
case ARM::t2STRi12: return ARM::t2STRi8;
|
|
case ARM::t2STRBi12: return ARM::t2STRBi8;
|
|
case ARM::t2STRHi12: return ARM::t2STRHi8;
|
|
|
|
case ARM::t2LDRi8:
|
|
case ARM::t2LDRHi8:
|
|
case ARM::t2LDRBi8:
|
|
case ARM::t2LDRSHi8:
|
|
case ARM::t2LDRSBi8:
|
|
case ARM::t2STRi8:
|
|
case ARM::t2STRBi8:
|
|
case ARM::t2STRHi8:
|
|
return opcode;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static unsigned
|
|
positiveOffsetOpcode(unsigned opcode)
|
|
{
|
|
switch (opcode) {
|
|
case ARM::t2LDRi8: return ARM::t2LDRi12;
|
|
case ARM::t2LDRHi8: return ARM::t2LDRHi12;
|
|
case ARM::t2LDRBi8: return ARM::t2LDRBi12;
|
|
case ARM::t2LDRSHi8: return ARM::t2LDRSHi12;
|
|
case ARM::t2LDRSBi8: return ARM::t2LDRSBi12;
|
|
case ARM::t2STRi8: return ARM::t2STRi12;
|
|
case ARM::t2STRBi8: return ARM::t2STRBi12;
|
|
case ARM::t2STRHi8: return ARM::t2STRHi12;
|
|
|
|
case ARM::t2LDRi12:
|
|
case ARM::t2LDRHi12:
|
|
case ARM::t2LDRBi12:
|
|
case ARM::t2LDRSHi12:
|
|
case ARM::t2LDRSBi12:
|
|
case ARM::t2STRi12:
|
|
case ARM::t2STRBi12:
|
|
case ARM::t2STRHi12:
|
|
return opcode;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static unsigned
|
|
immediateOffsetOpcode(unsigned opcode)
|
|
{
|
|
switch (opcode) {
|
|
case ARM::t2LDRs: return ARM::t2LDRi12;
|
|
case ARM::t2LDRHs: return ARM::t2LDRHi12;
|
|
case ARM::t2LDRBs: return ARM::t2LDRBi12;
|
|
case ARM::t2LDRSHs: return ARM::t2LDRSHi12;
|
|
case ARM::t2LDRSBs: return ARM::t2LDRSBi12;
|
|
case ARM::t2STRs: return ARM::t2STRi12;
|
|
case ARM::t2STRBs: return ARM::t2STRBi12;
|
|
case ARM::t2STRHs: return ARM::t2STRHi12;
|
|
|
|
case ARM::t2LDRi12:
|
|
case ARM::t2LDRHi12:
|
|
case ARM::t2LDRBi12:
|
|
case ARM::t2LDRSHi12:
|
|
case ARM::t2LDRSBi12:
|
|
case ARM::t2STRi12:
|
|
case ARM::t2STRBi12:
|
|
case ARM::t2STRHi12:
|
|
case ARM::t2LDRi8:
|
|
case ARM::t2LDRHi8:
|
|
case ARM::t2LDRBi8:
|
|
case ARM::t2LDRSHi8:
|
|
case ARM::t2LDRSBi8:
|
|
case ARM::t2STRi8:
|
|
case ARM::t2STRBi8:
|
|
case ARM::t2STRHi8:
|
|
return opcode;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
bool llvm::rewriteT2FrameIndex(MachineInstr &MI, unsigned FrameRegIdx,
|
|
unsigned FrameReg, int &Offset,
|
|
const ARMBaseInstrInfo &TII) {
|
|
unsigned Opcode = MI.getOpcode();
|
|
const TargetInstrDesc &Desc = MI.getDesc();
|
|
unsigned AddrMode = (Desc.TSFlags & ARMII::AddrModeMask);
|
|
bool isSub = false;
|
|
|
|
// Memory operands in inline assembly always use AddrModeT2_i12.
|
|
if (Opcode == ARM::INLINEASM)
|
|
AddrMode = ARMII::AddrModeT2_i12; // FIXME. mode for thumb2?
|
|
|
|
if (Opcode == ARM::t2ADDri || Opcode == ARM::t2ADDri12) {
|
|
Offset += MI.getOperand(FrameRegIdx+1).getImm();
|
|
|
|
unsigned PredReg;
|
|
if (Offset == 0 && getInstrPredicate(&MI, PredReg) == ARMCC::AL) {
|
|
// Turn it into a move.
|
|
MI.setDesc(TII.get(ARM::tMOVgpr2gpr));
|
|
MI.getOperand(FrameRegIdx).ChangeToRegister(FrameReg, false);
|
|
// Remove offset and remaining explicit predicate operands.
|
|
do MI.RemoveOperand(FrameRegIdx+1);
|
|
while (MI.getNumOperands() > FrameRegIdx+1 &&
|
|
(!MI.getOperand(FrameRegIdx+1).isReg() ||
|
|
!MI.getOperand(FrameRegIdx+1).isImm()));
|
|
return true;
|
|
}
|
|
|
|
bool isSP = FrameReg == ARM::SP;
|
|
bool HasCCOut = Opcode != ARM::t2ADDri12;
|
|
|
|
if (Offset < 0) {
|
|
Offset = -Offset;
|
|
isSub = true;
|
|
MI.setDesc(TII.get(isSP ? ARM::t2SUBrSPi : ARM::t2SUBri));
|
|
} else {
|
|
MI.setDesc(TII.get(isSP ? ARM::t2ADDrSPi : ARM::t2ADDri));
|
|
}
|
|
|
|
// Common case: small offset, fits into instruction.
|
|
if (ARM_AM::getT2SOImmVal(Offset) != -1) {
|
|
MI.getOperand(FrameRegIdx).ChangeToRegister(FrameReg, false);
|
|
MI.getOperand(FrameRegIdx+1).ChangeToImmediate(Offset);
|
|
// Add cc_out operand if the original instruction did not have one.
|
|
if (!HasCCOut)
|
|
MI.addOperand(MachineOperand::CreateReg(0, false));
|
|
Offset = 0;
|
|
return true;
|
|
}
|
|
// Another common case: imm12.
|
|
if (Offset < 4096 &&
|
|
(!HasCCOut || MI.getOperand(MI.getNumOperands()-1).getReg() == 0)) {
|
|
unsigned NewOpc = isSP
|
|
? (isSub ? ARM::t2SUBrSPi12 : ARM::t2ADDrSPi12)
|
|
: (isSub ? ARM::t2SUBri12 : ARM::t2ADDri12);
|
|
MI.setDesc(TII.get(NewOpc));
|
|
MI.getOperand(FrameRegIdx).ChangeToRegister(FrameReg, false);
|
|
MI.getOperand(FrameRegIdx+1).ChangeToImmediate(Offset);
|
|
// Remove the cc_out operand.
|
|
if (HasCCOut)
|
|
MI.RemoveOperand(MI.getNumOperands()-1);
|
|
Offset = 0;
|
|
return true;
|
|
}
|
|
|
|
// Otherwise, extract 8 adjacent bits from the immediate into this
|
|
// t2ADDri/t2SUBri.
|
|
unsigned RotAmt = CountLeadingZeros_32(Offset);
|
|
unsigned ThisImmVal = Offset & ARM_AM::rotr32(0xff000000U, RotAmt);
|
|
|
|
// We will handle these bits from offset, clear them.
|
|
Offset &= ~ThisImmVal;
|
|
|
|
assert(ARM_AM::getT2SOImmVal(ThisImmVal) != -1 &&
|
|
"Bit extraction didn't work?");
|
|
MI.getOperand(FrameRegIdx+1).ChangeToImmediate(ThisImmVal);
|
|
// Add cc_out operand if the original instruction did not have one.
|
|
if (!HasCCOut)
|
|
MI.addOperand(MachineOperand::CreateReg(0, false));
|
|
|
|
} else {
|
|
|
|
// AddrMode4 and AddrMode6 cannot handle any offset.
|
|
if (AddrMode == ARMII::AddrMode4 || AddrMode == ARMII::AddrMode6)
|
|
return false;
|
|
|
|
// AddrModeT2_so cannot handle any offset. If there is no offset
|
|
// register then we change to an immediate version.
|
|
unsigned NewOpc = Opcode;
|
|
if (AddrMode == ARMII::AddrModeT2_so) {
|
|
unsigned OffsetReg = MI.getOperand(FrameRegIdx+1).getReg();
|
|
if (OffsetReg != 0) {
|
|
MI.getOperand(FrameRegIdx).ChangeToRegister(FrameReg, false);
|
|
return Offset == 0;
|
|
}
|
|
|
|
MI.RemoveOperand(FrameRegIdx+1);
|
|
MI.getOperand(FrameRegIdx+1).ChangeToImmediate(0);
|
|
NewOpc = immediateOffsetOpcode(Opcode);
|
|
AddrMode = ARMII::AddrModeT2_i12;
|
|
}
|
|
|
|
unsigned NumBits = 0;
|
|
unsigned Scale = 1;
|
|
if (AddrMode == ARMII::AddrModeT2_i8 || AddrMode == ARMII::AddrModeT2_i12) {
|
|
// i8 supports only negative, and i12 supports only positive, so
|
|
// based on Offset sign convert Opcode to the appropriate
|
|
// instruction
|
|
Offset += MI.getOperand(FrameRegIdx+1).getImm();
|
|
if (Offset < 0) {
|
|
NewOpc = negativeOffsetOpcode(Opcode);
|
|
NumBits = 8;
|
|
isSub = true;
|
|
Offset = -Offset;
|
|
} else {
|
|
NewOpc = positiveOffsetOpcode(Opcode);
|
|
NumBits = 12;
|
|
}
|
|
} else if (AddrMode == ARMII::AddrMode5) {
|
|
// VFP address mode.
|
|
const MachineOperand &OffOp = MI.getOperand(FrameRegIdx+1);
|
|
int InstrOffs = ARM_AM::getAM5Offset(OffOp.getImm());
|
|
if (ARM_AM::getAM5Op(OffOp.getImm()) == ARM_AM::sub)
|
|
InstrOffs *= -1;
|
|
NumBits = 8;
|
|
Scale = 4;
|
|
Offset += InstrOffs * 4;
|
|
assert((Offset & (Scale-1)) == 0 && "Can't encode this offset!");
|
|
if (Offset < 0) {
|
|
Offset = -Offset;
|
|
isSub = true;
|
|
}
|
|
} else {
|
|
llvm_unreachable("Unsupported addressing mode!");
|
|
}
|
|
|
|
if (NewOpc != Opcode)
|
|
MI.setDesc(TII.get(NewOpc));
|
|
|
|
MachineOperand &ImmOp = MI.getOperand(FrameRegIdx+1);
|
|
|
|
// Attempt to fold address computation
|
|
// Common case: small offset, fits into instruction.
|
|
int ImmedOffset = Offset / Scale;
|
|
unsigned Mask = (1 << NumBits) - 1;
|
|
if ((unsigned)Offset <= Mask * Scale) {
|
|
// Replace the FrameIndex with fp/sp
|
|
MI.getOperand(FrameRegIdx).ChangeToRegister(FrameReg, false);
|
|
if (isSub) {
|
|
if (AddrMode == ARMII::AddrMode5)
|
|
// FIXME: Not consistent.
|
|
ImmedOffset |= 1 << NumBits;
|
|
else
|
|
ImmedOffset = -ImmedOffset;
|
|
}
|
|
ImmOp.ChangeToImmediate(ImmedOffset);
|
|
Offset = 0;
|
|
return true;
|
|
}
|
|
|
|
// Otherwise, offset doesn't fit. Pull in what we can to simplify
|
|
ImmedOffset = ImmedOffset & Mask;
|
|
if (isSub) {
|
|
if (AddrMode == ARMII::AddrMode5)
|
|
// FIXME: Not consistent.
|
|
ImmedOffset |= 1 << NumBits;
|
|
else {
|
|
ImmedOffset = -ImmedOffset;
|
|
if (ImmedOffset == 0)
|
|
// Change the opcode back if the encoded offset is zero.
|
|
MI.setDesc(TII.get(positiveOffsetOpcode(NewOpc)));
|
|
}
|
|
}
|
|
ImmOp.ChangeToImmediate(ImmedOffset);
|
|
Offset &= ~(Mask*Scale);
|
|
}
|
|
|
|
Offset = (isSub) ? -Offset : Offset;
|
|
return Offset == 0;
|
|
}
|
|
|
|
/// scheduleTwoAddrSource - Schedule the copy / re-mat of the source of the
|
|
/// two-addrss instruction inserted by two-address pass.
|
|
void
|
|
Thumb2InstrInfo::scheduleTwoAddrSource(MachineInstr *SrcMI,
|
|
MachineInstr *UseMI,
|
|
const TargetRegisterInfo &TRI) const {
|
|
if (SrcMI->getOpcode() != ARM::tMOVgpr2gpr ||
|
|
SrcMI->getOperand(1).isKill())
|
|
return;
|
|
|
|
unsigned PredReg = 0;
|
|
ARMCC::CondCodes CC = llvm::getInstrPredicate(UseMI, PredReg);
|
|
if (CC == ARMCC::AL || PredReg != ARM::CPSR)
|
|
return;
|
|
|
|
// Schedule the copy so it doesn't come between previous instructions
|
|
// and UseMI which can form an IT block.
|
|
unsigned SrcReg = SrcMI->getOperand(1).getReg();
|
|
ARMCC::CondCodes OCC = ARMCC::getOppositeCondition(CC);
|
|
MachineBasicBlock *MBB = UseMI->getParent();
|
|
MachineBasicBlock::iterator MBBI = SrcMI;
|
|
unsigned NumInsts = 0;
|
|
while (--MBBI != MBB->begin()) {
|
|
if (MBBI->isDebugValue())
|
|
continue;
|
|
|
|
MachineInstr *NMI = &*MBBI;
|
|
ARMCC::CondCodes NCC = llvm::getInstrPredicate(NMI, PredReg);
|
|
if (!(NCC == CC || NCC == OCC) ||
|
|
NMI->modifiesRegister(SrcReg, &TRI) ||
|
|
NMI->definesRegister(ARM::CPSR))
|
|
break;
|
|
if (++NumInsts == 4)
|
|
// Too many in a row!
|
|
return;
|
|
}
|
|
|
|
if (NumInsts) {
|
|
MBB->remove(SrcMI);
|
|
MBB->insert(++MBBI, SrcMI);
|
|
}
|
|
}
|
|
|
|
ARMCC::CondCodes
|
|
llvm::getITInstrPredicate(const MachineInstr *MI, unsigned &PredReg) {
|
|
unsigned Opc = MI->getOpcode();
|
|
if (Opc == ARM::tBcc || Opc == ARM::t2Bcc)
|
|
return ARMCC::AL;
|
|
return llvm::getInstrPredicate(MI, PredReg);
|
|
}
|