llvm/test/Analysis/DependenceAnalysis/StrongSIV.ll
David Blaikie 7c9c6ed761 [opaque pointer type] Add textual IR support for explicit type parameter to load instruction
Essentially the same as the GEP change in r230786.

A similar migration script can be used to update test cases, though a few more
test case improvements/changes were required this time around: (r229269-r229278)

import fileinput
import sys
import re

pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)")

for line in sys.stdin:
  sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line))

Reviewers: rafael, dexonsmith, grosser

Differential Revision: http://reviews.llvm.org/D7649

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230794 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 21:17:42 +00:00

437 lines
14 KiB
LLVM

; RUN: opt < %s -analyze -basicaa -da | FileCheck %s
; ModuleID = 'StrongSIV.bc'
target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
target triple = "x86_64-apple-macosx10.6.0"
;; for (int i = 0; i < n; i++) {
;; A[i + 2] = i;
;; *B++ = A[i];
define void @strong0(i32* %A, i32* %B, i64 %n) nounwind uwtable ssp {
entry:
%cmp1 = icmp sgt i64 %n, 0
br i1 %cmp1, label %for.body.preheader, label %for.end
; CHECK: da analyze - none!
; CHECK: da analyze - consistent flow [2]!
; CHECK: da analyze - confused!
; CHECK: da analyze - none!
; CHECK: da analyze - confused!
; CHECK: da analyze - none!
for.body.preheader: ; preds = %entry
br label %for.body
for.body: ; preds = %for.body.preheader, %for.body
%indvars.iv = phi i64 [ 0, %for.body.preheader ], [ %indvars.iv.next, %for.body ]
%B.addr.02 = phi i32* [ %incdec.ptr, %for.body ], [ %B, %for.body.preheader ]
%0 = add nsw i64 %indvars.iv, 2
%arrayidx = getelementptr inbounds i32, i32* %A, i64 %0
%1 = trunc i64 %indvars.iv to i32
store i32 %1, i32* %arrayidx, align 4
%arrayidx3 = getelementptr inbounds i32, i32* %A, i64 %indvars.iv
%2 = load i32, i32* %arrayidx3, align 4
%incdec.ptr = getelementptr inbounds i32, i32* %B.addr.02, i64 1
store i32 %2, i32* %B.addr.02, align 4
%indvars.iv.next = add i64 %indvars.iv, 1
%exitcond = icmp ne i64 %indvars.iv.next, %n
br i1 %exitcond, label %for.body, label %for.end.loopexit
for.end.loopexit: ; preds = %for.body
br label %for.end
for.end: ; preds = %for.end.loopexit, %entry
ret void
}
;; for (long int i = 0; i < n; i++) {
;; A[i + 2] = i;
;; *B++ = A[i];
define void @strong1(i32* %A, i32* %B, i32 %n) nounwind uwtable ssp {
entry:
%cmp1 = icmp sgt i32 %n, 0
br i1 %cmp1, label %for.body.preheader, label %for.end
; CHECK: da analyze - none!
; CHECK: da analyze - consistent flow [2]!
; CHECK: da analyze - confused!
; CHECK: da analyze - none!
; CHECK: da analyze - confused!
; CHECK: da analyze - none!
for.body.preheader: ; preds = %entry
%0 = sext i32 %n to i64
br label %for.body
for.body: ; preds = %for.body.preheader, %for.body
%i.03 = phi i64 [ %inc, %for.body ], [ 0, %for.body.preheader ]
%B.addr.02 = phi i32* [ %incdec.ptr, %for.body ], [ %B, %for.body.preheader ]
%conv2 = trunc i64 %i.03 to i32
%add = add nsw i64 %i.03, 2
%arrayidx = getelementptr inbounds i32, i32* %A, i64 %add
store i32 %conv2, i32* %arrayidx, align 4
%arrayidx3 = getelementptr inbounds i32, i32* %A, i64 %i.03
%1 = load i32, i32* %arrayidx3, align 4
%incdec.ptr = getelementptr inbounds i32, i32* %B.addr.02, i64 1
store i32 %1, i32* %B.addr.02, align 4
%inc = add nsw i64 %i.03, 1
%exitcond = icmp ne i64 %inc, %0
br i1 %exitcond, label %for.body, label %for.end.loopexit
for.end.loopexit: ; preds = %for.body
br label %for.end
for.end: ; preds = %for.end.loopexit, %entry
ret void
}
;; for (long unsigned i = 0; i < n; i++) {
;; A[i + 2] = i;
;; *B++ = A[i];
define void @strong2(i32* %A, i32* %B, i64 %n) nounwind uwtable ssp {
entry:
%cmp1 = icmp eq i64 %n, 0
br i1 %cmp1, label %for.end, label %for.body.preheader
; CHECK: da analyze - none!
; CHECK: da analyze - consistent flow [2]!
; CHECK: da analyze - confused!
; CHECK: da analyze - none!
; CHECK: da analyze - confused!
; CHECK: da analyze - none!
for.body.preheader: ; preds = %entry
br label %for.body
for.body: ; preds = %for.body.preheader, %for.body
%i.03 = phi i64 [ %inc, %for.body ], [ 0, %for.body.preheader ]
%B.addr.02 = phi i32* [ %incdec.ptr, %for.body ], [ %B, %for.body.preheader ]
%conv = trunc i64 %i.03 to i32
%add = add i64 %i.03, 2
%arrayidx = getelementptr inbounds i32, i32* %A, i64 %add
store i32 %conv, i32* %arrayidx, align 4
%arrayidx1 = getelementptr inbounds i32, i32* %A, i64 %i.03
%0 = load i32, i32* %arrayidx1, align 4
%incdec.ptr = getelementptr inbounds i32, i32* %B.addr.02, i64 1
store i32 %0, i32* %B.addr.02, align 4
%inc = add i64 %i.03, 1
%exitcond = icmp ne i64 %inc, %n
br i1 %exitcond, label %for.body, label %for.end.loopexit
for.end.loopexit: ; preds = %for.body
br label %for.end
for.end: ; preds = %for.end.loopexit, %entry
ret void
}
;; for (int i = 0; i < n; i++) {
;; A[i + 2] = i;
;; *B++ = A[i];
define void @strong3(i32* %A, i32* %B, i32 %n) nounwind uwtable ssp {
entry:
%cmp1 = icmp sgt i32 %n, 0
br i1 %cmp1, label %for.body.preheader, label %for.end
; CHECK: da analyze - none!
; CHECK: da analyze - consistent flow [2]!
; CHECK: da analyze - confused!
; CHECK: da analyze - none!
; CHECK: da analyze - confused!
; CHECK: da analyze - none!
for.body.preheader: ; preds = %entry
br label %for.body
for.body: ; preds = %for.body.preheader, %for.body
%indvars.iv = phi i64 [ 0, %for.body.preheader ], [ %indvars.iv.next, %for.body ]
%B.addr.02 = phi i32* [ %incdec.ptr, %for.body ], [ %B, %for.body.preheader ]
%0 = add nsw i64 %indvars.iv, 2
%arrayidx = getelementptr inbounds i32, i32* %A, i64 %0
%1 = trunc i64 %indvars.iv to i32
store i32 %1, i32* %arrayidx, align 4
%arrayidx2 = getelementptr inbounds i32, i32* %A, i64 %indvars.iv
%2 = load i32, i32* %arrayidx2, align 4
%incdec.ptr = getelementptr inbounds i32, i32* %B.addr.02, i64 1
store i32 %2, i32* %B.addr.02, align 4
%indvars.iv.next = add i64 %indvars.iv, 1
%lftr.wideiv = trunc i64 %indvars.iv.next to i32
%exitcond = icmp ne i32 %lftr.wideiv, %n
br i1 %exitcond, label %for.body, label %for.end.loopexit
for.end.loopexit: ; preds = %for.body
br label %for.end
for.end: ; preds = %for.end.loopexit, %entry
ret void
}
;; for (long unsigned i = 0; i < 19; i++) {
;; A[i + 19] = i;
;; *B++ = A[i];
define void @strong4(i32* %A, i32* %B, i64 %n) nounwind uwtable ssp {
entry:
br label %for.body
; CHECK: da analyze - none!
; CHECK: da analyze - none!
; CHECK: da analyze - confused!
; CHECK: da analyze - none!
; CHECK: da analyze - confused!
; CHECK: da analyze - none!
for.body: ; preds = %entry, %for.body
%i.02 = phi i64 [ 0, %entry ], [ %inc, %for.body ]
%B.addr.01 = phi i32* [ %B, %entry ], [ %incdec.ptr, %for.body ]
%conv = trunc i64 %i.02 to i32
%add = add i64 %i.02, 19
%arrayidx = getelementptr inbounds i32, i32* %A, i64 %add
store i32 %conv, i32* %arrayidx, align 4
%arrayidx1 = getelementptr inbounds i32, i32* %A, i64 %i.02
%0 = load i32, i32* %arrayidx1, align 4
%incdec.ptr = getelementptr inbounds i32, i32* %B.addr.01, i64 1
store i32 %0, i32* %B.addr.01, align 4
%inc = add i64 %i.02, 1
%exitcond = icmp ne i64 %inc, 19
br i1 %exitcond, label %for.body, label %for.end
for.end: ; preds = %for.body
ret void
}
;; for (long unsigned i = 0; i < 20; i++) {
;; A[i + 19] = i;
;; *B++ = A[i];
define void @strong5(i32* %A, i32* %B, i64 %n) nounwind uwtable ssp {
entry:
br label %for.body
; CHECK: da analyze - none!
; CHECK: da analyze - consistent flow [19]!
; CHECK: da analyze - confused!
; CHECK: da analyze - none!
; CHECK: da analyze - confused!
; CHECK: da analyze - none!
for.body: ; preds = %entry, %for.body
%i.02 = phi i64 [ 0, %entry ], [ %inc, %for.body ]
%B.addr.01 = phi i32* [ %B, %entry ], [ %incdec.ptr, %for.body ]
%conv = trunc i64 %i.02 to i32
%add = add i64 %i.02, 19
%arrayidx = getelementptr inbounds i32, i32* %A, i64 %add
store i32 %conv, i32* %arrayidx, align 4
%arrayidx1 = getelementptr inbounds i32, i32* %A, i64 %i.02
%0 = load i32, i32* %arrayidx1, align 4
%incdec.ptr = getelementptr inbounds i32, i32* %B.addr.01, i64 1
store i32 %0, i32* %B.addr.01, align 4
%inc = add i64 %i.02, 1
%exitcond = icmp ne i64 %inc, 20
br i1 %exitcond, label %for.body, label %for.end
for.end: ; preds = %for.body
ret void
}
;; for (long unsigned i = 0; i < 20; i++) {
;; A[2*i + 6] = i;
;; *B++ = A[2*i];
define void @strong6(i32* %A, i32* %B, i64 %n) nounwind uwtable ssp {
entry:
br label %for.body
; CHECK: da analyze - none!
; CHECK: da analyze - consistent flow [3]!
; CHECK: da analyze - confused!
; CHECK: da analyze - none!
; CHECK: da analyze - confused!
; CHECK: da analyze - none!
for.body: ; preds = %entry, %for.body
%i.02 = phi i64 [ 0, %entry ], [ %inc, %for.body ]
%B.addr.01 = phi i32* [ %B, %entry ], [ %incdec.ptr, %for.body ]
%conv = trunc i64 %i.02 to i32
%mul = shl i64 %i.02, 1
%add = add i64 %mul, 6
%arrayidx = getelementptr inbounds i32, i32* %A, i64 %add
store i32 %conv, i32* %arrayidx, align 4
%mul1 = shl i64 %i.02, 1
%arrayidx2 = getelementptr inbounds i32, i32* %A, i64 %mul1
%0 = load i32, i32* %arrayidx2, align 4
%incdec.ptr = getelementptr inbounds i32, i32* %B.addr.01, i64 1
store i32 %0, i32* %B.addr.01, align 4
%inc = add i64 %i.02, 1
%exitcond = icmp ne i64 %inc, 20
br i1 %exitcond, label %for.body, label %for.end
for.end: ; preds = %for.body
ret void
}
;; for (long unsigned i = 0; i < 20; i++) {
;; A[2*i + 7] = i;
;; *B++ = A[2*i];
define void @strong7(i32* %A, i32* %B, i64 %n) nounwind uwtable ssp {
entry:
br label %for.body
; CHECK: da analyze - none!
; CHECK: da analyze - none!
; CHECK: da analyze - confused!
; CHECK: da analyze - none!
; CHECK: da analyze - confused!
; CHECK: da analyze - none!
for.body: ; preds = %entry, %for.body
%i.02 = phi i64 [ 0, %entry ], [ %inc, %for.body ]
%B.addr.01 = phi i32* [ %B, %entry ], [ %incdec.ptr, %for.body ]
%conv = trunc i64 %i.02 to i32
%mul = shl i64 %i.02, 1
%add = add i64 %mul, 7
%arrayidx = getelementptr inbounds i32, i32* %A, i64 %add
store i32 %conv, i32* %arrayidx, align 4
%mul1 = shl i64 %i.02, 1
%arrayidx2 = getelementptr inbounds i32, i32* %A, i64 %mul1
%0 = load i32, i32* %arrayidx2, align 4
%incdec.ptr = getelementptr inbounds i32, i32* %B.addr.01, i64 1
store i32 %0, i32* %B.addr.01, align 4
%inc = add i64 %i.02, 1
%exitcond = icmp ne i64 %inc, 20
br i1 %exitcond, label %for.body, label %for.end
for.end: ; preds = %for.body
ret void
}
;; for (long unsigned i = 0; i < 20; i++) {
;; A[i + n] = i;
;; *B++ = A[i];
define void @strong8(i32* %A, i32* %B, i64 %n) nounwind uwtable ssp {
entry:
br label %for.body
; CHECK: da analyze - none!
; CHECK: da analyze - consistent flow [%n|<]!
; CHECK: da analyze - confused!
; CHECK: da analyze - none!
; CHECK: da analyze - confused!
; CHECK: da analyze - none!
for.body: ; preds = %entry, %for.body
%i.02 = phi i64 [ 0, %entry ], [ %inc, %for.body ]
%B.addr.01 = phi i32* [ %B, %entry ], [ %incdec.ptr, %for.body ]
%conv = trunc i64 %i.02 to i32
%add = add i64 %i.02, %n
%arrayidx = getelementptr inbounds i32, i32* %A, i64 %add
store i32 %conv, i32* %arrayidx, align 4
%arrayidx1 = getelementptr inbounds i32, i32* %A, i64 %i.02
%0 = load i32, i32* %arrayidx1, align 4
%incdec.ptr = getelementptr inbounds i32, i32* %B.addr.01, i64 1
store i32 %0, i32* %B.addr.01, align 4
%inc = add i64 %i.02, 1
%exitcond = icmp ne i64 %inc, 20
br i1 %exitcond, label %for.body, label %for.end
for.end: ; preds = %for.body
ret void
}
;; for (long unsigned i = 0; i < n; i++) {
;; A[i + n] = i;
;; *B++ = A[i + 2*n];
define void @strong9(i32* %A, i32* %B, i64 %n) nounwind uwtable ssp {
entry:
%cmp1 = icmp eq i64 %n, 0
br i1 %cmp1, label %for.end, label %for.body.preheader
; CHECK: da analyze - none!
; CHECK: da analyze - none!
; CHECK: da analyze - confused!
; CHECK: da analyze - none!
; CHECK: da analyze - confused!
; CHECK: da analyze - none!
for.body.preheader: ; preds = %entry
br label %for.body
for.body: ; preds = %for.body.preheader, %for.body
%i.03 = phi i64 [ %inc, %for.body ], [ 0, %for.body.preheader ]
%B.addr.02 = phi i32* [ %incdec.ptr, %for.body ], [ %B, %for.body.preheader ]
%conv = trunc i64 %i.03 to i32
%add = add i64 %i.03, %n
%arrayidx = getelementptr inbounds i32, i32* %A, i64 %add
store i32 %conv, i32* %arrayidx, align 4
%mul = shl i64 %n, 1
%add1 = add i64 %i.03, %mul
%arrayidx2 = getelementptr inbounds i32, i32* %A, i64 %add1
%0 = load i32, i32* %arrayidx2, align 4
%incdec.ptr = getelementptr inbounds i32, i32* %B.addr.02, i64 1
store i32 %0, i32* %B.addr.02, align 4
%inc = add i64 %i.03, 1
%exitcond = icmp ne i64 %inc, %n
br i1 %exitcond, label %for.body, label %for.end.loopexit
for.end.loopexit: ; preds = %for.body
br label %for.end
for.end: ; preds = %for.end.loopexit, %entry
ret void
}
;; for (long unsigned i = 0; i < 1000; i++) {
;; A[n*i + 5] = i;
;; *B++ = A[n*i + 5];
define void @strong10(i32* %A, i32* %B, i64 %n) nounwind uwtable ssp {
entry:
br label %for.body
; CHECK: da analyze - none!
; CHECK: da analyze - consistent flow [0|<]!
; CHECK: da analyze - confused!
; CHECK: da analyze - none!
; CHECK: da analyze - confused!
; CHECK: da analyze - none!
for.body: ; preds = %entry, %for.body
%i.02 = phi i64 [ 0, %entry ], [ %inc, %for.body ]
%B.addr.01 = phi i32* [ %B, %entry ], [ %incdec.ptr, %for.body ]
%conv = trunc i64 %i.02 to i32
%mul = mul i64 %i.02, %n
%add = add i64 %mul, 5
%arrayidx = getelementptr inbounds i32, i32* %A, i64 %add
store i32 %conv, i32* %arrayidx, align 4
%mul1 = mul i64 %i.02, %n
%add2 = add i64 %mul1, 5
%arrayidx3 = getelementptr inbounds i32, i32* %A, i64 %add2
%0 = load i32, i32* %arrayidx3, align 4
%incdec.ptr = getelementptr inbounds i32, i32* %B.addr.01, i64 1
store i32 %0, i32* %B.addr.01, align 4
%inc = add i64 %i.02, 1
%exitcond = icmp ne i64 %inc, 1000
br i1 %exitcond, label %for.body, label %for.end
for.end: ; preds = %for.body
ret void
}