llvm/lib/Target/X86/X86ISelDAGToDAG.cpp
Dan Gohman 29cbade25a Target-independent support for TargetFlags on BlockAddress operands,
and support for blockaddresses in x86-32 PIC mode.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89506 91177308-0d34-0410-b5e6-96231b3b80d8
2009-11-20 23:18:13 +00:00

2196 lines
78 KiB
C++

//===- X86ISelDAGToDAG.cpp - A DAG pattern matching inst selector for X86 -===//
//
// The LLVM Compiler Infrastructure
//
// This file is distributed under the University of Illinois Open Source
// License. See LICENSE.TXT for details.
//
//===----------------------------------------------------------------------===//
//
// This file defines a DAG pattern matching instruction selector for X86,
// converting from a legalized dag to a X86 dag.
//
//===----------------------------------------------------------------------===//
// Force NDEBUG on in any optimized build on Darwin.
//
// FIXME: This is a huge hack, to work around ridiculously awful compile times
// on this file with gcc-4.2 on Darwin, in Release mode.
#if (!defined(__llvm__) && defined(__APPLE__) && \
defined(__OPTIMIZE__) && !defined(NDEBUG))
#define NDEBUG
#endif
#define DEBUG_TYPE "x86-isel"
#include "X86.h"
#include "X86InstrBuilder.h"
#include "X86ISelLowering.h"
#include "X86MachineFunctionInfo.h"
#include "X86RegisterInfo.h"
#include "X86Subtarget.h"
#include "X86TargetMachine.h"
#include "llvm/GlobalValue.h"
#include "llvm/Instructions.h"
#include "llvm/Intrinsics.h"
#include "llvm/Support/CFG.h"
#include "llvm/Type.h"
#include "llvm/CodeGen/MachineConstantPool.h"
#include "llvm/CodeGen/MachineFunction.h"
#include "llvm/CodeGen/MachineFrameInfo.h"
#include "llvm/CodeGen/MachineInstrBuilder.h"
#include "llvm/CodeGen/MachineRegisterInfo.h"
#include "llvm/CodeGen/SelectionDAGISel.h"
#include "llvm/Target/TargetMachine.h"
#include "llvm/Target/TargetOptions.h"
#include "llvm/Support/Debug.h"
#include "llvm/Support/ErrorHandling.h"
#include "llvm/Support/MathExtras.h"
#include "llvm/Support/raw_ostream.h"
#include "llvm/ADT/SmallPtrSet.h"
#include "llvm/ADT/Statistic.h"
using namespace llvm;
#include "llvm/Support/CommandLine.h"
static cl::opt<bool> AvoidDupAddrCompute("x86-avoid-dup-address", cl::Hidden);
STATISTIC(NumLoadMoved, "Number of loads moved below TokenFactor");
//===----------------------------------------------------------------------===//
// Pattern Matcher Implementation
//===----------------------------------------------------------------------===//
namespace {
/// X86ISelAddressMode - This corresponds to X86AddressMode, but uses
/// SDValue's instead of register numbers for the leaves of the matched
/// tree.
struct X86ISelAddressMode {
enum {
RegBase,
FrameIndexBase
} BaseType;
struct { // This is really a union, discriminated by BaseType!
SDValue Reg;
int FrameIndex;
} Base;
unsigned Scale;
SDValue IndexReg;
int32_t Disp;
SDValue Segment;
GlobalValue *GV;
Constant *CP;
BlockAddress *BlockAddr;
const char *ES;
int JT;
unsigned Align; // CP alignment.
unsigned char SymbolFlags; // X86II::MO_*
X86ISelAddressMode()
: BaseType(RegBase), Scale(1), IndexReg(), Disp(0),
Segment(), GV(0), CP(0), BlockAddr(0), ES(0), JT(-1), Align(0),
SymbolFlags(X86II::MO_NO_FLAG) {
}
bool hasSymbolicDisplacement() const {
return GV != 0 || CP != 0 || ES != 0 || JT != -1 || BlockAddr != 0;
}
bool hasBaseOrIndexReg() const {
return IndexReg.getNode() != 0 || Base.Reg.getNode() != 0;
}
/// isRIPRelative - Return true if this addressing mode is already RIP
/// relative.
bool isRIPRelative() const {
if (BaseType != RegBase) return false;
if (RegisterSDNode *RegNode =
dyn_cast_or_null<RegisterSDNode>(Base.Reg.getNode()))
return RegNode->getReg() == X86::RIP;
return false;
}
void setBaseReg(SDValue Reg) {
BaseType = RegBase;
Base.Reg = Reg;
}
void dump() {
errs() << "X86ISelAddressMode " << this << '\n';
errs() << "Base.Reg ";
if (Base.Reg.getNode() != 0)
Base.Reg.getNode()->dump();
else
errs() << "nul";
errs() << " Base.FrameIndex " << Base.FrameIndex << '\n'
<< " Scale" << Scale << '\n'
<< "IndexReg ";
if (IndexReg.getNode() != 0)
IndexReg.getNode()->dump();
else
errs() << "nul";
errs() << " Disp " << Disp << '\n'
<< "GV ";
if (GV)
GV->dump();
else
errs() << "nul";
errs() << " CP ";
if (CP)
CP->dump();
else
errs() << "nul";
errs() << '\n'
<< "ES ";
if (ES)
errs() << ES;
else
errs() << "nul";
errs() << " JT" << JT << " Align" << Align << '\n';
}
};
}
namespace {
//===--------------------------------------------------------------------===//
/// ISel - X86 specific code to select X86 machine instructions for
/// SelectionDAG operations.
///
class X86DAGToDAGISel : public SelectionDAGISel {
/// X86Lowering - This object fully describes how to lower LLVM code to an
/// X86-specific SelectionDAG.
X86TargetLowering &X86Lowering;
/// Subtarget - Keep a pointer to the X86Subtarget around so that we can
/// make the right decision when generating code for different targets.
const X86Subtarget *Subtarget;
/// OptForSize - If true, selector should try to optimize for code size
/// instead of performance.
bool OptForSize;
public:
explicit X86DAGToDAGISel(X86TargetMachine &tm, CodeGenOpt::Level OptLevel)
: SelectionDAGISel(tm, OptLevel),
X86Lowering(*tm.getTargetLowering()),
Subtarget(&tm.getSubtarget<X86Subtarget>()),
OptForSize(false) {}
virtual const char *getPassName() const {
return "X86 DAG->DAG Instruction Selection";
}
/// InstructionSelect - This callback is invoked by
/// SelectionDAGISel when it has created a SelectionDAG for us to codegen.
virtual void InstructionSelect();
virtual void EmitFunctionEntryCode(Function &Fn, MachineFunction &MF);
virtual
bool IsLegalAndProfitableToFold(SDNode *N, SDNode *U, SDNode *Root) const;
// Include the pieces autogenerated from the target description.
#include "X86GenDAGISel.inc"
private:
SDNode *Select(SDValue N);
SDNode *SelectAtomic64(SDNode *Node, unsigned Opc);
SDNode *SelectAtomicLoadAdd(SDNode *Node, EVT NVT);
bool MatchSegmentBaseAddress(SDValue N, X86ISelAddressMode &AM);
bool MatchLoad(SDValue N, X86ISelAddressMode &AM);
bool MatchWrapper(SDValue N, X86ISelAddressMode &AM);
bool MatchAddress(SDValue N, X86ISelAddressMode &AM);
bool MatchAddressRecursively(SDValue N, X86ISelAddressMode &AM,
unsigned Depth);
bool MatchAddressBase(SDValue N, X86ISelAddressMode &AM);
bool SelectAddr(SDValue Op, SDValue N, SDValue &Base,
SDValue &Scale, SDValue &Index, SDValue &Disp,
SDValue &Segment);
bool SelectLEAAddr(SDValue Op, SDValue N, SDValue &Base,
SDValue &Scale, SDValue &Index, SDValue &Disp);
bool SelectTLSADDRAddr(SDValue Op, SDValue N, SDValue &Base,
SDValue &Scale, SDValue &Index, SDValue &Disp);
bool SelectScalarSSELoad(SDValue Op, SDValue Pred,
SDValue N, SDValue &Base, SDValue &Scale,
SDValue &Index, SDValue &Disp,
SDValue &Segment,
SDValue &InChain, SDValue &OutChain);
bool TryFoldLoad(SDValue P, SDValue N,
SDValue &Base, SDValue &Scale,
SDValue &Index, SDValue &Disp,
SDValue &Segment);
void PreprocessForRMW();
void PreprocessForFPConvert();
/// SelectInlineAsmMemoryOperand - Implement addressing mode selection for
/// inline asm expressions.
virtual bool SelectInlineAsmMemoryOperand(const SDValue &Op,
char ConstraintCode,
std::vector<SDValue> &OutOps);
void EmitSpecialCodeForMain(MachineBasicBlock *BB, MachineFrameInfo *MFI);
inline void getAddressOperands(X86ISelAddressMode &AM, SDValue &Base,
SDValue &Scale, SDValue &Index,
SDValue &Disp, SDValue &Segment) {
Base = (AM.BaseType == X86ISelAddressMode::FrameIndexBase) ?
CurDAG->getTargetFrameIndex(AM.Base.FrameIndex, TLI.getPointerTy()) :
AM.Base.Reg;
Scale = getI8Imm(AM.Scale);
Index = AM.IndexReg;
// These are 32-bit even in 64-bit mode since RIP relative offset
// is 32-bit.
if (AM.GV)
Disp = CurDAG->getTargetGlobalAddress(AM.GV, MVT::i32, AM.Disp,
AM.SymbolFlags);
else if (AM.CP)
Disp = CurDAG->getTargetConstantPool(AM.CP, MVT::i32,
AM.Align, AM.Disp, AM.SymbolFlags);
else if (AM.ES)
Disp = CurDAG->getTargetExternalSymbol(AM.ES, MVT::i32, AM.SymbolFlags);
else if (AM.JT != -1)
Disp = CurDAG->getTargetJumpTable(AM.JT, MVT::i32, AM.SymbolFlags);
else if (AM.BlockAddr)
Disp = CurDAG->getBlockAddress(AM.BlockAddr, MVT::i32,
true, AM.SymbolFlags);
else
Disp = CurDAG->getTargetConstant(AM.Disp, MVT::i32);
if (AM.Segment.getNode())
Segment = AM.Segment;
else
Segment = CurDAG->getRegister(0, MVT::i32);
}
/// getI8Imm - Return a target constant with the specified value, of type
/// i8.
inline SDValue getI8Imm(unsigned Imm) {
return CurDAG->getTargetConstant(Imm, MVT::i8);
}
/// getI16Imm - Return a target constant with the specified value, of type
/// i16.
inline SDValue getI16Imm(unsigned Imm) {
return CurDAG->getTargetConstant(Imm, MVT::i16);
}
/// getI32Imm - Return a target constant with the specified value, of type
/// i32.
inline SDValue getI32Imm(unsigned Imm) {
return CurDAG->getTargetConstant(Imm, MVT::i32);
}
/// getGlobalBaseReg - Return an SDNode that returns the value of
/// the global base register. Output instructions required to
/// initialize the global base register, if necessary.
///
SDNode *getGlobalBaseReg();
/// getTargetMachine - Return a reference to the TargetMachine, casted
/// to the target-specific type.
const X86TargetMachine &getTargetMachine() {
return static_cast<const X86TargetMachine &>(TM);
}
/// getInstrInfo - Return a reference to the TargetInstrInfo, casted
/// to the target-specific type.
const X86InstrInfo *getInstrInfo() {
return getTargetMachine().getInstrInfo();
}
#ifndef NDEBUG
unsigned Indent;
#endif
};
}
bool X86DAGToDAGISel::IsLegalAndProfitableToFold(SDNode *N, SDNode *U,
SDNode *Root) const {
if (OptLevel == CodeGenOpt::None) return false;
if (U == Root)
switch (U->getOpcode()) {
default: break;
case ISD::ADD:
case ISD::ADDC:
case ISD::ADDE:
case ISD::AND:
case ISD::OR:
case ISD::XOR: {
SDValue Op1 = U->getOperand(1);
// If the other operand is a 8-bit immediate we should fold the immediate
// instead. This reduces code size.
// e.g.
// movl 4(%esp), %eax
// addl $4, %eax
// vs.
// movl $4, %eax
// addl 4(%esp), %eax
// The former is 2 bytes shorter. In case where the increment is 1, then
// the saving can be 4 bytes (by using incl %eax).
if (ConstantSDNode *Imm = dyn_cast<ConstantSDNode>(Op1))
if (Imm->getAPIntValue().isSignedIntN(8))
return false;
// If the other operand is a TLS address, we should fold it instead.
// This produces
// movl %gs:0, %eax
// leal i@NTPOFF(%eax), %eax
// instead of
// movl $i@NTPOFF, %eax
// addl %gs:0, %eax
// if the block also has an access to a second TLS address this will save
// a load.
// FIXME: This is probably also true for non TLS addresses.
if (Op1.getOpcode() == X86ISD::Wrapper) {
SDValue Val = Op1.getOperand(0);
if (Val.getOpcode() == ISD::TargetGlobalTLSAddress)
return false;
}
}
}
// Proceed to 'generic' cycle finder code
return SelectionDAGISel::IsLegalAndProfitableToFold(N, U, Root);
}
/// MoveBelowTokenFactor - Replace TokenFactor operand with load's chain operand
/// and move load below the TokenFactor. Replace store's chain operand with
/// load's chain result.
static void MoveBelowTokenFactor(SelectionDAG *CurDAG, SDValue Load,
SDValue Store, SDValue TF) {
SmallVector<SDValue, 4> Ops;
for (unsigned i = 0, e = TF.getNode()->getNumOperands(); i != e; ++i)
if (Load.getNode() == TF.getOperand(i).getNode())
Ops.push_back(Load.getOperand(0));
else
Ops.push_back(TF.getOperand(i));
SDValue NewTF = CurDAG->UpdateNodeOperands(TF, &Ops[0], Ops.size());
SDValue NewLoad = CurDAG->UpdateNodeOperands(Load, NewTF,
Load.getOperand(1),
Load.getOperand(2));
CurDAG->UpdateNodeOperands(Store, NewLoad.getValue(1), Store.getOperand(1),
Store.getOperand(2), Store.getOperand(3));
}
/// isRMWLoad - Return true if N is a load that's part of RMW sub-DAG. The
/// chain produced by the load must only be used by the store's chain operand,
/// otherwise this may produce a cycle in the DAG.
///
static bool isRMWLoad(SDValue N, SDValue Chain, SDValue Address,
SDValue &Load) {
if (N.getOpcode() == ISD::BIT_CONVERT)
N = N.getOperand(0);
LoadSDNode *LD = dyn_cast<LoadSDNode>(N);
if (!LD || LD->isVolatile())
return false;
if (LD->getAddressingMode() != ISD::UNINDEXED)
return false;
ISD::LoadExtType ExtType = LD->getExtensionType();
if (ExtType != ISD::NON_EXTLOAD && ExtType != ISD::EXTLOAD)
return false;
if (N.hasOneUse() &&
LD->hasNUsesOfValue(1, 1) &&
N.getOperand(1) == Address &&
LD->isOperandOf(Chain.getNode())) {
Load = N;
return true;
}
return false;
}
/// MoveBelowCallSeqStart - Replace CALLSEQ_START operand with load's chain
/// operand and move load below the call's chain operand.
static void MoveBelowCallSeqStart(SelectionDAG *CurDAG, SDValue Load,
SDValue Call, SDValue CallSeqStart) {
SmallVector<SDValue, 8> Ops;
SDValue Chain = CallSeqStart.getOperand(0);
if (Chain.getNode() == Load.getNode())
Ops.push_back(Load.getOperand(0));
else {
assert(Chain.getOpcode() == ISD::TokenFactor &&
"Unexpected CallSeqStart chain operand");
for (unsigned i = 0, e = Chain.getNumOperands(); i != e; ++i)
if (Chain.getOperand(i).getNode() == Load.getNode())
Ops.push_back(Load.getOperand(0));
else
Ops.push_back(Chain.getOperand(i));
SDValue NewChain =
CurDAG->getNode(ISD::TokenFactor, Load.getDebugLoc(),
MVT::Other, &Ops[0], Ops.size());
Ops.clear();
Ops.push_back(NewChain);
}
for (unsigned i = 1, e = CallSeqStart.getNumOperands(); i != e; ++i)
Ops.push_back(CallSeqStart.getOperand(i));
CurDAG->UpdateNodeOperands(CallSeqStart, &Ops[0], Ops.size());
CurDAG->UpdateNodeOperands(Load, Call.getOperand(0),
Load.getOperand(1), Load.getOperand(2));
Ops.clear();
Ops.push_back(SDValue(Load.getNode(), 1));
for (unsigned i = 1, e = Call.getNode()->getNumOperands(); i != e; ++i)
Ops.push_back(Call.getOperand(i));
CurDAG->UpdateNodeOperands(Call, &Ops[0], Ops.size());
}
/// isCalleeLoad - Return true if call address is a load and it can be
/// moved below CALLSEQ_START and the chains leading up to the call.
/// Return the CALLSEQ_START by reference as a second output.
static bool isCalleeLoad(SDValue Callee, SDValue &Chain) {
if (Callee.getNode() == Chain.getNode() || !Callee.hasOneUse())
return false;
LoadSDNode *LD = dyn_cast<LoadSDNode>(Callee.getNode());
if (!LD ||
LD->isVolatile() ||
LD->getAddressingMode() != ISD::UNINDEXED ||
LD->getExtensionType() != ISD::NON_EXTLOAD)
return false;
// Now let's find the callseq_start.
while (Chain.getOpcode() != ISD::CALLSEQ_START) {
if (!Chain.hasOneUse())
return false;
Chain = Chain.getOperand(0);
}
if (Chain.getOperand(0).getNode() == Callee.getNode())
return true;
if (Chain.getOperand(0).getOpcode() == ISD::TokenFactor &&
Callee.getValue(1).isOperandOf(Chain.getOperand(0).getNode()) &&
Callee.getValue(1).hasOneUse())
return true;
return false;
}
/// PreprocessForRMW - Preprocess the DAG to make instruction selection better.
/// This is only run if not in -O0 mode.
/// This allows the instruction selector to pick more read-modify-write
/// instructions. This is a common case:
///
/// [Load chain]
/// ^
/// |
/// [Load]
/// ^ ^
/// | |
/// / \-
/// / |
/// [TokenFactor] [Op]
/// ^ ^
/// | |
/// \ /
/// \ /
/// [Store]
///
/// The fact the store's chain operand != load's chain will prevent the
/// (store (op (load))) instruction from being selected. We can transform it to:
///
/// [Load chain]
/// ^
/// |
/// [TokenFactor]
/// ^
/// |
/// [Load]
/// ^ ^
/// | |
/// | \-
/// | |
/// | [Op]
/// | ^
/// | |
/// \ /
/// \ /
/// [Store]
void X86DAGToDAGISel::PreprocessForRMW() {
for (SelectionDAG::allnodes_iterator I = CurDAG->allnodes_begin(),
E = CurDAG->allnodes_end(); I != E; ++I) {
if (I->getOpcode() == X86ISD::CALL) {
/// Also try moving call address load from outside callseq_start to just
/// before the call to allow it to be folded.
///
/// [Load chain]
/// ^
/// |
/// [Load]
/// ^ ^
/// | |
/// / \--
/// / |
///[CALLSEQ_START] |
/// ^ |
/// | |
/// [LOAD/C2Reg] |
/// | |
/// \ /
/// \ /
/// [CALL]
SDValue Chain = I->getOperand(0);
SDValue Load = I->getOperand(1);
if (!isCalleeLoad(Load, Chain))
continue;
MoveBelowCallSeqStart(CurDAG, Load, SDValue(I, 0), Chain);
++NumLoadMoved;
continue;
}
if (!ISD::isNON_TRUNCStore(I))
continue;
SDValue Chain = I->getOperand(0);
if (Chain.getNode()->getOpcode() != ISD::TokenFactor)
continue;
SDValue N1 = I->getOperand(1);
SDValue N2 = I->getOperand(2);
if ((N1.getValueType().isFloatingPoint() &&
!N1.getValueType().isVector()) ||
!N1.hasOneUse())
continue;
bool RModW = false;
SDValue Load;
unsigned Opcode = N1.getNode()->getOpcode();
switch (Opcode) {
case ISD::ADD:
case ISD::MUL:
case ISD::AND:
case ISD::OR:
case ISD::XOR:
case ISD::ADDC:
case ISD::ADDE:
case ISD::VECTOR_SHUFFLE: {
SDValue N10 = N1.getOperand(0);
SDValue N11 = N1.getOperand(1);
RModW = isRMWLoad(N10, Chain, N2, Load);
if (!RModW)
RModW = isRMWLoad(N11, Chain, N2, Load);
break;
}
case ISD::SUB:
case ISD::SHL:
case ISD::SRA:
case ISD::SRL:
case ISD::ROTL:
case ISD::ROTR:
case ISD::SUBC:
case ISD::SUBE:
case X86ISD::SHLD:
case X86ISD::SHRD: {
SDValue N10 = N1.getOperand(0);
RModW = isRMWLoad(N10, Chain, N2, Load);
break;
}
}
if (RModW) {
MoveBelowTokenFactor(CurDAG, Load, SDValue(I, 0), Chain);
++NumLoadMoved;
}
}
}
/// PreprocessForFPConvert - Walk over the dag lowering fpround and fpextend
/// nodes that target the FP stack to be store and load to the stack. This is a
/// gross hack. We would like to simply mark these as being illegal, but when
/// we do that, legalize produces these when it expands calls, then expands
/// these in the same legalize pass. We would like dag combine to be able to
/// hack on these between the call expansion and the node legalization. As such
/// this pass basically does "really late" legalization of these inline with the
/// X86 isel pass.
void X86DAGToDAGISel::PreprocessForFPConvert() {
for (SelectionDAG::allnodes_iterator I = CurDAG->allnodes_begin(),
E = CurDAG->allnodes_end(); I != E; ) {
SDNode *N = I++; // Preincrement iterator to avoid invalidation issues.
if (N->getOpcode() != ISD::FP_ROUND && N->getOpcode() != ISD::FP_EXTEND)
continue;
// If the source and destination are SSE registers, then this is a legal
// conversion that should not be lowered.
EVT SrcVT = N->getOperand(0).getValueType();
EVT DstVT = N->getValueType(0);
bool SrcIsSSE = X86Lowering.isScalarFPTypeInSSEReg(SrcVT);
bool DstIsSSE = X86Lowering.isScalarFPTypeInSSEReg(DstVT);
if (SrcIsSSE && DstIsSSE)
continue;
if (!SrcIsSSE && !DstIsSSE) {
// If this is an FPStack extension, it is a noop.
if (N->getOpcode() == ISD::FP_EXTEND)
continue;
// If this is a value-preserving FPStack truncation, it is a noop.
if (N->getConstantOperandVal(1))
continue;
}
// Here we could have an FP stack truncation or an FPStack <-> SSE convert.
// FPStack has extload and truncstore. SSE can fold direct loads into other
// operations. Based on this, decide what we want to do.
EVT MemVT;
if (N->getOpcode() == ISD::FP_ROUND)
MemVT = DstVT; // FP_ROUND must use DstVT, we can't do a 'trunc load'.
else
MemVT = SrcIsSSE ? SrcVT : DstVT;
SDValue MemTmp = CurDAG->CreateStackTemporary(MemVT);
DebugLoc dl = N->getDebugLoc();
// FIXME: optimize the case where the src/dest is a load or store?
SDValue Store = CurDAG->getTruncStore(CurDAG->getEntryNode(), dl,
N->getOperand(0),
MemTmp, NULL, 0, MemVT);
SDValue Result = CurDAG->getExtLoad(ISD::EXTLOAD, dl, DstVT, Store, MemTmp,
NULL, 0, MemVT);
// We're about to replace all uses of the FP_ROUND/FP_EXTEND with the
// extload we created. This will cause general havok on the dag because
// anything below the conversion could be folded into other existing nodes.
// To avoid invalidating 'I', back it up to the convert node.
--I;
CurDAG->ReplaceAllUsesOfValueWith(SDValue(N, 0), Result);
// Now that we did that, the node is dead. Increment the iterator to the
// next node to process, then delete N.
++I;
CurDAG->DeleteNode(N);
}
}
/// InstructionSelectBasicBlock - This callback is invoked by SelectionDAGISel
/// when it has created a SelectionDAG for us to codegen.
void X86DAGToDAGISel::InstructionSelect() {
const Function *F = MF->getFunction();
OptForSize = F->hasFnAttr(Attribute::OptimizeForSize);
if (OptLevel != CodeGenOpt::None)
PreprocessForRMW();
// FIXME: This should only happen when not compiled with -O0.
PreprocessForFPConvert();
// Codegen the basic block.
#ifndef NDEBUG
DEBUG(errs() << "===== Instruction selection begins:\n");
Indent = 0;
#endif
SelectRoot(*CurDAG);
#ifndef NDEBUG
DEBUG(errs() << "===== Instruction selection ends:\n");
#endif
CurDAG->RemoveDeadNodes();
}
/// EmitSpecialCodeForMain - Emit any code that needs to be executed only in
/// the main function.
void X86DAGToDAGISel::EmitSpecialCodeForMain(MachineBasicBlock *BB,
MachineFrameInfo *MFI) {
const TargetInstrInfo *TII = TM.getInstrInfo();
if (Subtarget->isTargetCygMing())
BuildMI(BB, DebugLoc::getUnknownLoc(),
TII->get(X86::CALLpcrel32)).addExternalSymbol("__main");
}
void X86DAGToDAGISel::EmitFunctionEntryCode(Function &Fn, MachineFunction &MF) {
// If this is main, emit special code for main.
MachineBasicBlock *BB = MF.begin();
if (Fn.hasExternalLinkage() && Fn.getName() == "main")
EmitSpecialCodeForMain(BB, MF.getFrameInfo());
}
bool X86DAGToDAGISel::MatchSegmentBaseAddress(SDValue N,
X86ISelAddressMode &AM) {
assert(N.getOpcode() == X86ISD::SegmentBaseAddress);
SDValue Segment = N.getOperand(0);
if (AM.Segment.getNode() == 0) {
AM.Segment = Segment;
return false;
}
return true;
}
bool X86DAGToDAGISel::MatchLoad(SDValue N, X86ISelAddressMode &AM) {
// This optimization is valid because the GNU TLS model defines that
// gs:0 (or fs:0 on X86-64) contains its own address.
// For more information see http://people.redhat.com/drepper/tls.pdf
SDValue Address = N.getOperand(1);
if (Address.getOpcode() == X86ISD::SegmentBaseAddress &&
!MatchSegmentBaseAddress (Address, AM))
return false;
return true;
}
/// MatchWrapper - Try to match X86ISD::Wrapper and X86ISD::WrapperRIP nodes
/// into an addressing mode. These wrap things that will resolve down into a
/// symbol reference. If no match is possible, this returns true, otherwise it
/// returns false.
bool X86DAGToDAGISel::MatchWrapper(SDValue N, X86ISelAddressMode &AM) {
// If the addressing mode already has a symbol as the displacement, we can
// never match another symbol.
if (AM.hasSymbolicDisplacement())
return true;
SDValue N0 = N.getOperand(0);
CodeModel::Model M = TM.getCodeModel();
// Handle X86-64 rip-relative addresses. We check this before checking direct
// folding because RIP is preferable to non-RIP accesses.
if (Subtarget->is64Bit() &&
// Under X86-64 non-small code model, GV (and friends) are 64-bits, so
// they cannot be folded into immediate fields.
// FIXME: This can be improved for kernel and other models?
(M == CodeModel::Small || M == CodeModel::Kernel) &&
// Base and index reg must be 0 in order to use %rip as base and lowering
// must allow RIP.
!AM.hasBaseOrIndexReg() && N.getOpcode() == X86ISD::WrapperRIP) {
if (GlobalAddressSDNode *G = dyn_cast<GlobalAddressSDNode>(N0)) {
int64_t Offset = AM.Disp + G->getOffset();
if (!X86::isOffsetSuitableForCodeModel(Offset, M)) return true;
AM.GV = G->getGlobal();
AM.Disp = Offset;
AM.SymbolFlags = G->getTargetFlags();
} else if (ConstantPoolSDNode *CP = dyn_cast<ConstantPoolSDNode>(N0)) {
int64_t Offset = AM.Disp + CP->getOffset();
if (!X86::isOffsetSuitableForCodeModel(Offset, M)) return true;
AM.CP = CP->getConstVal();
AM.Align = CP->getAlignment();
AM.Disp = Offset;
AM.SymbolFlags = CP->getTargetFlags();
} else if (ExternalSymbolSDNode *S = dyn_cast<ExternalSymbolSDNode>(N0)) {
AM.ES = S->getSymbol();
AM.SymbolFlags = S->getTargetFlags();
} else if (JumpTableSDNode *J = dyn_cast<JumpTableSDNode>(N0)) {
AM.JT = J->getIndex();
AM.SymbolFlags = J->getTargetFlags();
} else {
AM.BlockAddr = cast<BlockAddressSDNode>(N0)->getBlockAddress();
AM.SymbolFlags = cast<BlockAddressSDNode>(N0)->getTargetFlags();
}
if (N.getOpcode() == X86ISD::WrapperRIP)
AM.setBaseReg(CurDAG->getRegister(X86::RIP, MVT::i64));
return false;
}
// Handle the case when globals fit in our immediate field: This is true for
// X86-32 always and X86-64 when in -static -mcmodel=small mode. In 64-bit
// mode, this results in a non-RIP-relative computation.
if (!Subtarget->is64Bit() ||
((M == CodeModel::Small || M == CodeModel::Kernel) &&
TM.getRelocationModel() == Reloc::Static)) {
if (GlobalAddressSDNode *G = dyn_cast<GlobalAddressSDNode>(N0)) {
AM.GV = G->getGlobal();
AM.Disp += G->getOffset();
AM.SymbolFlags = G->getTargetFlags();
} else if (ConstantPoolSDNode *CP = dyn_cast<ConstantPoolSDNode>(N0)) {
AM.CP = CP->getConstVal();
AM.Align = CP->getAlignment();
AM.Disp += CP->getOffset();
AM.SymbolFlags = CP->getTargetFlags();
} else if (ExternalSymbolSDNode *S = dyn_cast<ExternalSymbolSDNode>(N0)) {
AM.ES = S->getSymbol();
AM.SymbolFlags = S->getTargetFlags();
} else if (JumpTableSDNode *J = dyn_cast<JumpTableSDNode>(N0)) {
AM.JT = J->getIndex();
AM.SymbolFlags = J->getTargetFlags();
} else {
AM.BlockAddr = cast<BlockAddressSDNode>(N0)->getBlockAddress();
AM.SymbolFlags = cast<BlockAddressSDNode>(N0)->getTargetFlags();
}
return false;
}
return true;
}
/// MatchAddress - Add the specified node to the specified addressing mode,
/// returning true if it cannot be done. This just pattern matches for the
/// addressing mode.
bool X86DAGToDAGISel::MatchAddress(SDValue N, X86ISelAddressMode &AM) {
if (MatchAddressRecursively(N, AM, 0))
return true;
// Post-processing: Convert lea(,%reg,2) to lea(%reg,%reg), which has
// a smaller encoding and avoids a scaled-index.
if (AM.Scale == 2 &&
AM.BaseType == X86ISelAddressMode::RegBase &&
AM.Base.Reg.getNode() == 0) {
AM.Base.Reg = AM.IndexReg;
AM.Scale = 1;
}
// Post-processing: Convert foo to foo(%rip), even in non-PIC mode,
// because it has a smaller encoding.
// TODO: Which other code models can use this?
if (TM.getCodeModel() == CodeModel::Small &&
Subtarget->is64Bit() &&
AM.Scale == 1 &&
AM.BaseType == X86ISelAddressMode::RegBase &&
AM.Base.Reg.getNode() == 0 &&
AM.IndexReg.getNode() == 0 &&
AM.SymbolFlags == X86II::MO_NO_FLAG &&
AM.hasSymbolicDisplacement())
AM.Base.Reg = CurDAG->getRegister(X86::RIP, MVT::i64);
return false;
}
bool X86DAGToDAGISel::MatchAddressRecursively(SDValue N, X86ISelAddressMode &AM,
unsigned Depth) {
bool is64Bit = Subtarget->is64Bit();
DebugLoc dl = N.getDebugLoc();
DEBUG({
errs() << "MatchAddress: ";
AM.dump();
});
// Limit recursion.
if (Depth > 5)
return MatchAddressBase(N, AM);
CodeModel::Model M = TM.getCodeModel();
// If this is already a %rip relative address, we can only merge immediates
// into it. Instead of handling this in every case, we handle it here.
// RIP relative addressing: %rip + 32-bit displacement!
if (AM.isRIPRelative()) {
// FIXME: JumpTable and ExternalSymbol address currently don't like
// displacements. It isn't very important, but this should be fixed for
// consistency.
if (!AM.ES && AM.JT != -1) return true;
if (ConstantSDNode *Cst = dyn_cast<ConstantSDNode>(N)) {
int64_t Val = AM.Disp + Cst->getSExtValue();
if (X86::isOffsetSuitableForCodeModel(Val, M,
AM.hasSymbolicDisplacement())) {
AM.Disp = Val;
return false;
}
}
return true;
}
switch (N.getOpcode()) {
default: break;
case ISD::Constant: {
uint64_t Val = cast<ConstantSDNode>(N)->getSExtValue();
if (!is64Bit ||
X86::isOffsetSuitableForCodeModel(AM.Disp + Val, M,
AM.hasSymbolicDisplacement())) {
AM.Disp += Val;
return false;
}
break;
}
case X86ISD::SegmentBaseAddress:
if (!MatchSegmentBaseAddress(N, AM))
return false;
break;
case X86ISD::Wrapper:
case X86ISD::WrapperRIP:
if (!MatchWrapper(N, AM))
return false;
break;
case ISD::LOAD:
if (!MatchLoad(N, AM))
return false;
break;
case ISD::FrameIndex:
if (AM.BaseType == X86ISelAddressMode::RegBase
&& AM.Base.Reg.getNode() == 0) {
AM.BaseType = X86ISelAddressMode::FrameIndexBase;
AM.Base.FrameIndex = cast<FrameIndexSDNode>(N)->getIndex();
return false;
}
break;
case ISD::SHL:
if (AM.IndexReg.getNode() != 0 || AM.Scale != 1)
break;
if (ConstantSDNode
*CN = dyn_cast<ConstantSDNode>(N.getNode()->getOperand(1))) {
unsigned Val = CN->getZExtValue();
// Note that we handle x<<1 as (,x,2) rather than (x,x) here so
// that the base operand remains free for further matching. If
// the base doesn't end up getting used, a post-processing step
// in MatchAddress turns (,x,2) into (x,x), which is cheaper.
if (Val == 1 || Val == 2 || Val == 3) {
AM.Scale = 1 << Val;
SDValue ShVal = N.getNode()->getOperand(0);
// Okay, we know that we have a scale by now. However, if the scaled
// value is an add of something and a constant, we can fold the
// constant into the disp field here.
if (ShVal.getNode()->getOpcode() == ISD::ADD && ShVal.hasOneUse() &&
isa<ConstantSDNode>(ShVal.getNode()->getOperand(1))) {
AM.IndexReg = ShVal.getNode()->getOperand(0);
ConstantSDNode *AddVal =
cast<ConstantSDNode>(ShVal.getNode()->getOperand(1));
uint64_t Disp = AM.Disp + (AddVal->getSExtValue() << Val);
if (!is64Bit ||
X86::isOffsetSuitableForCodeModel(Disp, M,
AM.hasSymbolicDisplacement()))
AM.Disp = Disp;
else
AM.IndexReg = ShVal;
} else {
AM.IndexReg = ShVal;
}
return false;
}
break;
}
case ISD::SMUL_LOHI:
case ISD::UMUL_LOHI:
// A mul_lohi where we need the low part can be folded as a plain multiply.
if (N.getResNo() != 0) break;
// FALL THROUGH
case ISD::MUL:
case X86ISD::MUL_IMM:
// X*[3,5,9] -> X+X*[2,4,8]
if (AM.BaseType == X86ISelAddressMode::RegBase &&
AM.Base.Reg.getNode() == 0 &&
AM.IndexReg.getNode() == 0) {
if (ConstantSDNode
*CN = dyn_cast<ConstantSDNode>(N.getNode()->getOperand(1)))
if (CN->getZExtValue() == 3 || CN->getZExtValue() == 5 ||
CN->getZExtValue() == 9) {
AM.Scale = unsigned(CN->getZExtValue())-1;
SDValue MulVal = N.getNode()->getOperand(0);
SDValue Reg;
// Okay, we know that we have a scale by now. However, if the scaled
// value is an add of something and a constant, we can fold the
// constant into the disp field here.
if (MulVal.getNode()->getOpcode() == ISD::ADD && MulVal.hasOneUse() &&
isa<ConstantSDNode>(MulVal.getNode()->getOperand(1))) {
Reg = MulVal.getNode()->getOperand(0);
ConstantSDNode *AddVal =
cast<ConstantSDNode>(MulVal.getNode()->getOperand(1));
uint64_t Disp = AM.Disp + AddVal->getSExtValue() *
CN->getZExtValue();
if (!is64Bit ||
X86::isOffsetSuitableForCodeModel(Disp, M,
AM.hasSymbolicDisplacement()))
AM.Disp = Disp;
else
Reg = N.getNode()->getOperand(0);
} else {
Reg = N.getNode()->getOperand(0);
}
AM.IndexReg = AM.Base.Reg = Reg;
return false;
}
}
break;
case ISD::SUB: {
// Given A-B, if A can be completely folded into the address and
// the index field with the index field unused, use -B as the index.
// This is a win if a has multiple parts that can be folded into
// the address. Also, this saves a mov if the base register has
// other uses, since it avoids a two-address sub instruction, however
// it costs an additional mov if the index register has other uses.
// Test if the LHS of the sub can be folded.
X86ISelAddressMode Backup = AM;
if (MatchAddressRecursively(N.getNode()->getOperand(0), AM, Depth+1)) {
AM = Backup;
break;
}
// Test if the index field is free for use.
if (AM.IndexReg.getNode() || AM.isRIPRelative()) {
AM = Backup;
break;
}
int Cost = 0;
SDValue RHS = N.getNode()->getOperand(1);
// If the RHS involves a register with multiple uses, this
// transformation incurs an extra mov, due to the neg instruction
// clobbering its operand.
if (!RHS.getNode()->hasOneUse() ||
RHS.getNode()->getOpcode() == ISD::CopyFromReg ||
RHS.getNode()->getOpcode() == ISD::TRUNCATE ||
RHS.getNode()->getOpcode() == ISD::ANY_EXTEND ||
(RHS.getNode()->getOpcode() == ISD::ZERO_EXTEND &&
RHS.getNode()->getOperand(0).getValueType() == MVT::i32))
++Cost;
// If the base is a register with multiple uses, this
// transformation may save a mov.
if ((AM.BaseType == X86ISelAddressMode::RegBase &&
AM.Base.Reg.getNode() &&
!AM.Base.Reg.getNode()->hasOneUse()) ||
AM.BaseType == X86ISelAddressMode::FrameIndexBase)
--Cost;
// If the folded LHS was interesting, this transformation saves
// address arithmetic.
if ((AM.hasSymbolicDisplacement() && !Backup.hasSymbolicDisplacement()) +
((AM.Disp != 0) && (Backup.Disp == 0)) +
(AM.Segment.getNode() && !Backup.Segment.getNode()) >= 2)
--Cost;
// If it doesn't look like it may be an overall win, don't do it.
if (Cost >= 0) {
AM = Backup;
break;
}
// Ok, the transformation is legal and appears profitable. Go for it.
SDValue Zero = CurDAG->getConstant(0, N.getValueType());
SDValue Neg = CurDAG->getNode(ISD::SUB, dl, N.getValueType(), Zero, RHS);
AM.IndexReg = Neg;
AM.Scale = 1;
// Insert the new nodes into the topological ordering.
if (Zero.getNode()->getNodeId() == -1 ||
Zero.getNode()->getNodeId() > N.getNode()->getNodeId()) {
CurDAG->RepositionNode(N.getNode(), Zero.getNode());
Zero.getNode()->setNodeId(N.getNode()->getNodeId());
}
if (Neg.getNode()->getNodeId() == -1 ||
Neg.getNode()->getNodeId() > N.getNode()->getNodeId()) {
CurDAG->RepositionNode(N.getNode(), Neg.getNode());
Neg.getNode()->setNodeId(N.getNode()->getNodeId());
}
return false;
}
case ISD::ADD: {
X86ISelAddressMode Backup = AM;
if (!MatchAddressRecursively(N.getNode()->getOperand(0), AM, Depth+1) &&
!MatchAddressRecursively(N.getNode()->getOperand(1), AM, Depth+1))
return false;
AM = Backup;
if (!MatchAddressRecursively(N.getNode()->getOperand(1), AM, Depth+1) &&
!MatchAddressRecursively(N.getNode()->getOperand(0), AM, Depth+1))
return false;
AM = Backup;
// If we couldn't fold both operands into the address at the same time,
// see if we can just put each operand into a register and fold at least
// the add.
if (AM.BaseType == X86ISelAddressMode::RegBase &&
!AM.Base.Reg.getNode() &&
!AM.IndexReg.getNode()) {
AM.Base.Reg = N.getNode()->getOperand(0);
AM.IndexReg = N.getNode()->getOperand(1);
AM.Scale = 1;
return false;
}
break;
}
case ISD::OR:
// Handle "X | C" as "X + C" iff X is known to have C bits clear.
if (ConstantSDNode *CN = dyn_cast<ConstantSDNode>(N.getOperand(1))) {
X86ISelAddressMode Backup = AM;
uint64_t Offset = CN->getSExtValue();
// Start with the LHS as an addr mode.
if (!MatchAddressRecursively(N.getOperand(0), AM, Depth+1) &&
// Address could not have picked a GV address for the displacement.
AM.GV == NULL &&
// On x86-64, the resultant disp must fit in 32-bits.
(!is64Bit ||
X86::isOffsetSuitableForCodeModel(AM.Disp + Offset, M,
AM.hasSymbolicDisplacement())) &&
// Check to see if the LHS & C is zero.
CurDAG->MaskedValueIsZero(N.getOperand(0), CN->getAPIntValue())) {
AM.Disp += Offset;
return false;
}
AM = Backup;
}
break;
case ISD::AND: {
// Perform some heroic transforms on an and of a constant-count shift
// with a constant to enable use of the scaled offset field.
SDValue Shift = N.getOperand(0);
if (Shift.getNumOperands() != 2) break;
// Scale must not be used already.
if (AM.IndexReg.getNode() != 0 || AM.Scale != 1) break;
SDValue X = Shift.getOperand(0);
ConstantSDNode *C2 = dyn_cast<ConstantSDNode>(N.getOperand(1));
ConstantSDNode *C1 = dyn_cast<ConstantSDNode>(Shift.getOperand(1));
if (!C1 || !C2) break;
// Handle "(X >> (8-C1)) & C2" as "(X >> 8) & 0xff)" if safe. This
// allows us to convert the shift and and into an h-register extract and
// a scaled index.
if (Shift.getOpcode() == ISD::SRL && Shift.hasOneUse()) {
unsigned ScaleLog = 8 - C1->getZExtValue();
if (ScaleLog > 0 && ScaleLog < 4 &&
C2->getZExtValue() == (UINT64_C(0xff) << ScaleLog)) {
SDValue Eight = CurDAG->getConstant(8, MVT::i8);
SDValue Mask = CurDAG->getConstant(0xff, N.getValueType());
SDValue Srl = CurDAG->getNode(ISD::SRL, dl, N.getValueType(),
X, Eight);
SDValue And = CurDAG->getNode(ISD::AND, dl, N.getValueType(),
Srl, Mask);
SDValue ShlCount = CurDAG->getConstant(ScaleLog, MVT::i8);
SDValue Shl = CurDAG->getNode(ISD::SHL, dl, N.getValueType(),
And, ShlCount);
// Insert the new nodes into the topological ordering.
if (Eight.getNode()->getNodeId() == -1 ||
Eight.getNode()->getNodeId() > X.getNode()->getNodeId()) {
CurDAG->RepositionNode(X.getNode(), Eight.getNode());
Eight.getNode()->setNodeId(X.getNode()->getNodeId());
}
if (Mask.getNode()->getNodeId() == -1 ||
Mask.getNode()->getNodeId() > X.getNode()->getNodeId()) {
CurDAG->RepositionNode(X.getNode(), Mask.getNode());
Mask.getNode()->setNodeId(X.getNode()->getNodeId());
}
if (Srl.getNode()->getNodeId() == -1 ||
Srl.getNode()->getNodeId() > Shift.getNode()->getNodeId()) {
CurDAG->RepositionNode(Shift.getNode(), Srl.getNode());
Srl.getNode()->setNodeId(Shift.getNode()->getNodeId());
}
if (And.getNode()->getNodeId() == -1 ||
And.getNode()->getNodeId() > N.getNode()->getNodeId()) {
CurDAG->RepositionNode(N.getNode(), And.getNode());
And.getNode()->setNodeId(N.getNode()->getNodeId());
}
if (ShlCount.getNode()->getNodeId() == -1 ||
ShlCount.getNode()->getNodeId() > X.getNode()->getNodeId()) {
CurDAG->RepositionNode(X.getNode(), ShlCount.getNode());
ShlCount.getNode()->setNodeId(N.getNode()->getNodeId());
}
if (Shl.getNode()->getNodeId() == -1 ||
Shl.getNode()->getNodeId() > N.getNode()->getNodeId()) {
CurDAG->RepositionNode(N.getNode(), Shl.getNode());
Shl.getNode()->setNodeId(N.getNode()->getNodeId());
}
CurDAG->ReplaceAllUsesWith(N, Shl);
AM.IndexReg = And;
AM.Scale = (1 << ScaleLog);
return false;
}
}
// Handle "(X << C1) & C2" as "(X & (C2>>C1)) << C1" if safe and if this
// allows us to fold the shift into this addressing mode.
if (Shift.getOpcode() != ISD::SHL) break;
// Not likely to be profitable if either the AND or SHIFT node has more
// than one use (unless all uses are for address computation). Besides,
// isel mechanism requires their node ids to be reused.
if (!N.hasOneUse() || !Shift.hasOneUse())
break;
// Verify that the shift amount is something we can fold.
unsigned ShiftCst = C1->getZExtValue();
if (ShiftCst != 1 && ShiftCst != 2 && ShiftCst != 3)
break;
// Get the new AND mask, this folds to a constant.
SDValue NewANDMask = CurDAG->getNode(ISD::SRL, dl, N.getValueType(),
SDValue(C2, 0), SDValue(C1, 0));
SDValue NewAND = CurDAG->getNode(ISD::AND, dl, N.getValueType(), X,
NewANDMask);
SDValue NewSHIFT = CurDAG->getNode(ISD::SHL, dl, N.getValueType(),
NewAND, SDValue(C1, 0));
// Insert the new nodes into the topological ordering.
if (C1->getNodeId() > X.getNode()->getNodeId()) {
CurDAG->RepositionNode(X.getNode(), C1);
C1->setNodeId(X.getNode()->getNodeId());
}
if (NewANDMask.getNode()->getNodeId() == -1 ||
NewANDMask.getNode()->getNodeId() > X.getNode()->getNodeId()) {
CurDAG->RepositionNode(X.getNode(), NewANDMask.getNode());
NewANDMask.getNode()->setNodeId(X.getNode()->getNodeId());
}
if (NewAND.getNode()->getNodeId() == -1 ||
NewAND.getNode()->getNodeId() > Shift.getNode()->getNodeId()) {
CurDAG->RepositionNode(Shift.getNode(), NewAND.getNode());
NewAND.getNode()->setNodeId(Shift.getNode()->getNodeId());
}
if (NewSHIFT.getNode()->getNodeId() == -1 ||
NewSHIFT.getNode()->getNodeId() > N.getNode()->getNodeId()) {
CurDAG->RepositionNode(N.getNode(), NewSHIFT.getNode());
NewSHIFT.getNode()->setNodeId(N.getNode()->getNodeId());
}
CurDAG->ReplaceAllUsesWith(N, NewSHIFT);
AM.Scale = 1 << ShiftCst;
AM.IndexReg = NewAND;
return false;
}
}
return MatchAddressBase(N, AM);
}
/// MatchAddressBase - Helper for MatchAddress. Add the specified node to the
/// specified addressing mode without any further recursion.
bool X86DAGToDAGISel::MatchAddressBase(SDValue N, X86ISelAddressMode &AM) {
// Is the base register already occupied?
if (AM.BaseType != X86ISelAddressMode::RegBase || AM.Base.Reg.getNode()) {
// If so, check to see if the scale index register is set.
if (AM.IndexReg.getNode() == 0) {
AM.IndexReg = N;
AM.Scale = 1;
return false;
}
// Otherwise, we cannot select it.
return true;
}
// Default, generate it as a register.
AM.BaseType = X86ISelAddressMode::RegBase;
AM.Base.Reg = N;
return false;
}
/// SelectAddr - returns true if it is able pattern match an addressing mode.
/// It returns the operands which make up the maximal addressing mode it can
/// match by reference.
bool X86DAGToDAGISel::SelectAddr(SDValue Op, SDValue N, SDValue &Base,
SDValue &Scale, SDValue &Index,
SDValue &Disp, SDValue &Segment) {
X86ISelAddressMode AM;
bool Done = false;
if (AvoidDupAddrCompute && !N.hasOneUse()) {
unsigned Opcode = N.getOpcode();
if (Opcode != ISD::Constant && Opcode != ISD::FrameIndex &&
Opcode != X86ISD::Wrapper && Opcode != X86ISD::WrapperRIP) {
// If we are able to fold N into addressing mode, then we'll allow it even
// if N has multiple uses. In general, addressing computation is used as
// addresses by all of its uses. But watch out for CopyToReg uses, that
// means the address computation is liveout. It will be computed by a LEA
// so we want to avoid computing the address twice.
for (SDNode::use_iterator UI = N.getNode()->use_begin(),
UE = N.getNode()->use_end(); UI != UE; ++UI) {
if (UI->getOpcode() == ISD::CopyToReg) {
MatchAddressBase(N, AM);
Done = true;
break;
}
}
}
}
if (!Done && MatchAddress(N, AM))
return false;
EVT VT = N.getValueType();
if (AM.BaseType == X86ISelAddressMode::RegBase) {
if (!AM.Base.Reg.getNode())
AM.Base.Reg = CurDAG->getRegister(0, VT);
}
if (!AM.IndexReg.getNode())
AM.IndexReg = CurDAG->getRegister(0, VT);
getAddressOperands(AM, Base, Scale, Index, Disp, Segment);
return true;
}
/// SelectScalarSSELoad - Match a scalar SSE load. In particular, we want to
/// match a load whose top elements are either undef or zeros. The load flavor
/// is derived from the type of N, which is either v4f32 or v2f64.
bool X86DAGToDAGISel::SelectScalarSSELoad(SDValue Op, SDValue Pred,
SDValue N, SDValue &Base,
SDValue &Scale, SDValue &Index,
SDValue &Disp, SDValue &Segment,
SDValue &InChain,
SDValue &OutChain) {
if (N.getOpcode() == ISD::SCALAR_TO_VECTOR) {
InChain = N.getOperand(0).getValue(1);
if (ISD::isNON_EXTLoad(InChain.getNode()) &&
InChain.getValue(0).hasOneUse() &&
N.hasOneUse() &&
IsLegalAndProfitableToFold(N.getNode(), Pred.getNode(), Op.getNode())) {
LoadSDNode *LD = cast<LoadSDNode>(InChain);
if (!SelectAddr(Op, LD->getBasePtr(), Base, Scale, Index, Disp, Segment))
return false;
OutChain = LD->getChain();
return true;
}
}
// Also handle the case where we explicitly require zeros in the top
// elements. This is a vector shuffle from the zero vector.
if (N.getOpcode() == X86ISD::VZEXT_MOVL && N.getNode()->hasOneUse() &&
// Check to see if the top elements are all zeros (or bitcast of zeros).
N.getOperand(0).getOpcode() == ISD::SCALAR_TO_VECTOR &&
N.getOperand(0).getNode()->hasOneUse() &&
ISD::isNON_EXTLoad(N.getOperand(0).getOperand(0).getNode()) &&
N.getOperand(0).getOperand(0).hasOneUse()) {
// Okay, this is a zero extending load. Fold it.
LoadSDNode *LD = cast<LoadSDNode>(N.getOperand(0).getOperand(0));
if (!SelectAddr(Op, LD->getBasePtr(), Base, Scale, Index, Disp, Segment))
return false;
OutChain = LD->getChain();
InChain = SDValue(LD, 1);
return true;
}
return false;
}
/// SelectLEAAddr - it calls SelectAddr and determines if the maximal addressing
/// mode it matches can be cost effectively emitted as an LEA instruction.
bool X86DAGToDAGISel::SelectLEAAddr(SDValue Op, SDValue N,
SDValue &Base, SDValue &Scale,
SDValue &Index, SDValue &Disp) {
X86ISelAddressMode AM;
// Set AM.Segment to prevent MatchAddress from using one. LEA doesn't support
// segments.
SDValue Copy = AM.Segment;
SDValue T = CurDAG->getRegister(0, MVT::i32);
AM.Segment = T;
if (MatchAddress(N, AM))
return false;
assert (T == AM.Segment);
AM.Segment = Copy;
EVT VT = N.getValueType();
unsigned Complexity = 0;
if (AM.BaseType == X86ISelAddressMode::RegBase)
if (AM.Base.Reg.getNode())
Complexity = 1;
else
AM.Base.Reg = CurDAG->getRegister(0, VT);
else if (AM.BaseType == X86ISelAddressMode::FrameIndexBase)
Complexity = 4;
if (AM.IndexReg.getNode())
Complexity++;
else
AM.IndexReg = CurDAG->getRegister(0, VT);
// Don't match just leal(,%reg,2). It's cheaper to do addl %reg, %reg, or with
// a simple shift.
if (AM.Scale > 1)
Complexity++;
// FIXME: We are artificially lowering the criteria to turn ADD %reg, $GA
// to a LEA. This is determined with some expermentation but is by no means
// optimal (especially for code size consideration). LEA is nice because of
// its three-address nature. Tweak the cost function again when we can run
// convertToThreeAddress() at register allocation time.
if (AM.hasSymbolicDisplacement()) {
// For X86-64, we should always use lea to materialize RIP relative
// addresses.
if (Subtarget->is64Bit())
Complexity = 4;
else
Complexity += 2;
}
if (AM.Disp && (AM.Base.Reg.getNode() || AM.IndexReg.getNode()))
Complexity++;
// If it isn't worth using an LEA, reject it.
if (Complexity <= 2)
return false;
SDValue Segment;
getAddressOperands(AM, Base, Scale, Index, Disp, Segment);
return true;
}
/// SelectTLSADDRAddr - This is only run on TargetGlobalTLSAddress nodes.
bool X86DAGToDAGISel::SelectTLSADDRAddr(SDValue Op, SDValue N, SDValue &Base,
SDValue &Scale, SDValue &Index,
SDValue &Disp) {
assert(Op.getOpcode() == X86ISD::TLSADDR);
assert(N.getOpcode() == ISD::TargetGlobalTLSAddress);
const GlobalAddressSDNode *GA = cast<GlobalAddressSDNode>(N);
X86ISelAddressMode AM;
AM.GV = GA->getGlobal();
AM.Disp += GA->getOffset();
AM.Base.Reg = CurDAG->getRegister(0, N.getValueType());
AM.SymbolFlags = GA->getTargetFlags();
if (N.getValueType() == MVT::i32) {
AM.Scale = 1;
AM.IndexReg = CurDAG->getRegister(X86::EBX, MVT::i32);
} else {
AM.IndexReg = CurDAG->getRegister(0, MVT::i64);
}
SDValue Segment;
getAddressOperands(AM, Base, Scale, Index, Disp, Segment);
return true;
}
bool X86DAGToDAGISel::TryFoldLoad(SDValue P, SDValue N,
SDValue &Base, SDValue &Scale,
SDValue &Index, SDValue &Disp,
SDValue &Segment) {
if (ISD::isNON_EXTLoad(N.getNode()) &&
N.hasOneUse() &&
IsLegalAndProfitableToFold(N.getNode(), P.getNode(), P.getNode()))
return SelectAddr(P, N.getOperand(1), Base, Scale, Index, Disp, Segment);
return false;
}
/// getGlobalBaseReg - Return an SDNode that returns the value of
/// the global base register. Output instructions required to
/// initialize the global base register, if necessary.
///
SDNode *X86DAGToDAGISel::getGlobalBaseReg() {
unsigned GlobalBaseReg = getInstrInfo()->getGlobalBaseReg(MF);
return CurDAG->getRegister(GlobalBaseReg, TLI.getPointerTy()).getNode();
}
static SDNode *FindCallStartFromCall(SDNode *Node) {
if (Node->getOpcode() == ISD::CALLSEQ_START) return Node;
assert(Node->getOperand(0).getValueType() == MVT::Other &&
"Node doesn't have a token chain argument!");
return FindCallStartFromCall(Node->getOperand(0).getNode());
}
SDNode *X86DAGToDAGISel::SelectAtomic64(SDNode *Node, unsigned Opc) {
SDValue Chain = Node->getOperand(0);
SDValue In1 = Node->getOperand(1);
SDValue In2L = Node->getOperand(2);
SDValue In2H = Node->getOperand(3);
SDValue Tmp0, Tmp1, Tmp2, Tmp3, Tmp4;
if (!SelectAddr(In1, In1, Tmp0, Tmp1, Tmp2, Tmp3, Tmp4))
return NULL;
MachineSDNode::mmo_iterator MemOp = MF->allocateMemRefsArray(1);
MemOp[0] = cast<MemSDNode>(Node)->getMemOperand();
const SDValue Ops[] = { Tmp0, Tmp1, Tmp2, Tmp3, Tmp4, In2L, In2H, Chain};
SDNode *ResNode = CurDAG->getMachineNode(Opc, Node->getDebugLoc(),
MVT::i32, MVT::i32, MVT::Other, Ops,
array_lengthof(Ops));
cast<MachineSDNode>(ResNode)->setMemRefs(MemOp, MemOp + 1);
return ResNode;
}
SDNode *X86DAGToDAGISel::SelectAtomicLoadAdd(SDNode *Node, EVT NVT) {
if (Node->hasAnyUseOfValue(0))
return 0;
// Optimize common patterns for __sync_add_and_fetch and
// __sync_sub_and_fetch where the result is not used. This allows us
// to use "lock" version of add, sub, inc, dec instructions.
// FIXME: Do not use special instructions but instead add the "lock"
// prefix to the target node somehow. The extra information will then be
// transferred to machine instruction and it denotes the prefix.
SDValue Chain = Node->getOperand(0);
SDValue Ptr = Node->getOperand(1);
SDValue Val = Node->getOperand(2);
SDValue Tmp0, Tmp1, Tmp2, Tmp3, Tmp4;
if (!SelectAddr(Ptr, Ptr, Tmp0, Tmp1, Tmp2, Tmp3, Tmp4))
return 0;
bool isInc = false, isDec = false, isSub = false, isCN = false;
ConstantSDNode *CN = dyn_cast<ConstantSDNode>(Val);
if (CN) {
isCN = true;
int64_t CNVal = CN->getSExtValue();
if (CNVal == 1)
isInc = true;
else if (CNVal == -1)
isDec = true;
else if (CNVal >= 0)
Val = CurDAG->getTargetConstant(CNVal, NVT);
else {
isSub = true;
Val = CurDAG->getTargetConstant(-CNVal, NVT);
}
} else if (Val.hasOneUse() &&
Val.getOpcode() == ISD::SUB &&
X86::isZeroNode(Val.getOperand(0))) {
isSub = true;
Val = Val.getOperand(1);
}
unsigned Opc = 0;
switch (NVT.getSimpleVT().SimpleTy) {
default: return 0;
case MVT::i8:
if (isInc)
Opc = X86::LOCK_INC8m;
else if (isDec)
Opc = X86::LOCK_DEC8m;
else if (isSub) {
if (isCN)
Opc = X86::LOCK_SUB8mi;
else
Opc = X86::LOCK_SUB8mr;
} else {
if (isCN)
Opc = X86::LOCK_ADD8mi;
else
Opc = X86::LOCK_ADD8mr;
}
break;
case MVT::i16:
if (isInc)
Opc = X86::LOCK_INC16m;
else if (isDec)
Opc = X86::LOCK_DEC16m;
else if (isSub) {
if (isCN) {
if (Predicate_i16immSExt8(Val.getNode()))
Opc = X86::LOCK_SUB16mi8;
else
Opc = X86::LOCK_SUB16mi;
} else
Opc = X86::LOCK_SUB16mr;
} else {
if (isCN) {
if (Predicate_i16immSExt8(Val.getNode()))
Opc = X86::LOCK_ADD16mi8;
else
Opc = X86::LOCK_ADD16mi;
} else
Opc = X86::LOCK_ADD16mr;
}
break;
case MVT::i32:
if (isInc)
Opc = X86::LOCK_INC32m;
else if (isDec)
Opc = X86::LOCK_DEC32m;
else if (isSub) {
if (isCN) {
if (Predicate_i32immSExt8(Val.getNode()))
Opc = X86::LOCK_SUB32mi8;
else
Opc = X86::LOCK_SUB32mi;
} else
Opc = X86::LOCK_SUB32mr;
} else {
if (isCN) {
if (Predicate_i32immSExt8(Val.getNode()))
Opc = X86::LOCK_ADD32mi8;
else
Opc = X86::LOCK_ADD32mi;
} else
Opc = X86::LOCK_ADD32mr;
}
break;
case MVT::i64:
if (isInc)
Opc = X86::LOCK_INC64m;
else if (isDec)
Opc = X86::LOCK_DEC64m;
else if (isSub) {
Opc = X86::LOCK_SUB64mr;
if (isCN) {
if (Predicate_i64immSExt8(Val.getNode()))
Opc = X86::LOCK_SUB64mi8;
else if (Predicate_i64immSExt32(Val.getNode()))
Opc = X86::LOCK_SUB64mi32;
}
} else {
Opc = X86::LOCK_ADD64mr;
if (isCN) {
if (Predicate_i64immSExt8(Val.getNode()))
Opc = X86::LOCK_ADD64mi8;
else if (Predicate_i64immSExt32(Val.getNode()))
Opc = X86::LOCK_ADD64mi32;
}
}
break;
}
DebugLoc dl = Node->getDebugLoc();
SDValue Undef = SDValue(CurDAG->getMachineNode(TargetInstrInfo::IMPLICIT_DEF,
dl, NVT), 0);
MachineSDNode::mmo_iterator MemOp = MF->allocateMemRefsArray(1);
MemOp[0] = cast<MemSDNode>(Node)->getMemOperand();
if (isInc || isDec) {
SDValue Ops[] = { Tmp0, Tmp1, Tmp2, Tmp3, Tmp4, Chain };
SDValue Ret = SDValue(CurDAG->getMachineNode(Opc, dl, MVT::Other, Ops, 6), 0);
cast<MachineSDNode>(Ret)->setMemRefs(MemOp, MemOp + 1);
SDValue RetVals[] = { Undef, Ret };
return CurDAG->getMergeValues(RetVals, 2, dl).getNode();
} else {
SDValue Ops[] = { Tmp0, Tmp1, Tmp2, Tmp3, Tmp4, Val, Chain };
SDValue Ret = SDValue(CurDAG->getMachineNode(Opc, dl, MVT::Other, Ops, 7), 0);
cast<MachineSDNode>(Ret)->setMemRefs(MemOp, MemOp + 1);
SDValue RetVals[] = { Undef, Ret };
return CurDAG->getMergeValues(RetVals, 2, dl).getNode();
}
}
/// HasNoSignedComparisonUses - Test whether the given X86ISD::CMP node has
/// any uses which require the SF or OF bits to be accurate.
static bool HasNoSignedComparisonUses(SDNode *N) {
// Examine each user of the node.
for (SDNode::use_iterator UI = N->use_begin(),
UE = N->use_end(); UI != UE; ++UI) {
// Only examine CopyToReg uses.
if (UI->getOpcode() != ISD::CopyToReg)
return false;
// Only examine CopyToReg uses that copy to EFLAGS.
if (cast<RegisterSDNode>(UI->getOperand(1))->getReg() !=
X86::EFLAGS)
return false;
// Examine each user of the CopyToReg use.
for (SDNode::use_iterator FlagUI = UI->use_begin(),
FlagUE = UI->use_end(); FlagUI != FlagUE; ++FlagUI) {
// Only examine the Flag result.
if (FlagUI.getUse().getResNo() != 1) continue;
// Anything unusual: assume conservatively.
if (!FlagUI->isMachineOpcode()) return false;
// Examine the opcode of the user.
switch (FlagUI->getMachineOpcode()) {
// These comparisons don't treat the most significant bit specially.
case X86::SETAr: case X86::SETAEr: case X86::SETBr: case X86::SETBEr:
case X86::SETEr: case X86::SETNEr: case X86::SETPr: case X86::SETNPr:
case X86::SETAm: case X86::SETAEm: case X86::SETBm: case X86::SETBEm:
case X86::SETEm: case X86::SETNEm: case X86::SETPm: case X86::SETNPm:
case X86::JA: case X86::JAE: case X86::JB: case X86::JBE:
case X86::JE: case X86::JNE: case X86::JP: case X86::JNP:
case X86::CMOVA16rr: case X86::CMOVA16rm:
case X86::CMOVA32rr: case X86::CMOVA32rm:
case X86::CMOVA64rr: case X86::CMOVA64rm:
case X86::CMOVAE16rr: case X86::CMOVAE16rm:
case X86::CMOVAE32rr: case X86::CMOVAE32rm:
case X86::CMOVAE64rr: case X86::CMOVAE64rm:
case X86::CMOVB16rr: case X86::CMOVB16rm:
case X86::CMOVB32rr: case X86::CMOVB32rm:
case X86::CMOVB64rr: case X86::CMOVB64rm:
case X86::CMOVBE16rr: case X86::CMOVBE16rm:
case X86::CMOVBE32rr: case X86::CMOVBE32rm:
case X86::CMOVBE64rr: case X86::CMOVBE64rm:
case X86::CMOVE16rr: case X86::CMOVE16rm:
case X86::CMOVE32rr: case X86::CMOVE32rm:
case X86::CMOVE64rr: case X86::CMOVE64rm:
case X86::CMOVNE16rr: case X86::CMOVNE16rm:
case X86::CMOVNE32rr: case X86::CMOVNE32rm:
case X86::CMOVNE64rr: case X86::CMOVNE64rm:
case X86::CMOVNP16rr: case X86::CMOVNP16rm:
case X86::CMOVNP32rr: case X86::CMOVNP32rm:
case X86::CMOVNP64rr: case X86::CMOVNP64rm:
case X86::CMOVP16rr: case X86::CMOVP16rm:
case X86::CMOVP32rr: case X86::CMOVP32rm:
case X86::CMOVP64rr: case X86::CMOVP64rm:
continue;
// Anything else: assume conservatively.
default: return false;
}
}
}
return true;
}
SDNode *X86DAGToDAGISel::Select(SDValue N) {
SDNode *Node = N.getNode();
EVT NVT = Node->getValueType(0);
unsigned Opc, MOpc;
unsigned Opcode = Node->getOpcode();
DebugLoc dl = Node->getDebugLoc();
#ifndef NDEBUG
DEBUG({
errs() << std::string(Indent, ' ') << "Selecting: ";
Node->dump(CurDAG);
errs() << '\n';
});
Indent += 2;
#endif
if (Node->isMachineOpcode()) {
#ifndef NDEBUG
DEBUG({
errs() << std::string(Indent-2, ' ') << "== ";
Node->dump(CurDAG);
errs() << '\n';
});
Indent -= 2;
#endif
return NULL; // Already selected.
}
switch (Opcode) {
default: break;
case X86ISD::GlobalBaseReg:
return getGlobalBaseReg();
case X86ISD::ATOMOR64_DAG:
return SelectAtomic64(Node, X86::ATOMOR6432);
case X86ISD::ATOMXOR64_DAG:
return SelectAtomic64(Node, X86::ATOMXOR6432);
case X86ISD::ATOMADD64_DAG:
return SelectAtomic64(Node, X86::ATOMADD6432);
case X86ISD::ATOMSUB64_DAG:
return SelectAtomic64(Node, X86::ATOMSUB6432);
case X86ISD::ATOMNAND64_DAG:
return SelectAtomic64(Node, X86::ATOMNAND6432);
case X86ISD::ATOMAND64_DAG:
return SelectAtomic64(Node, X86::ATOMAND6432);
case X86ISD::ATOMSWAP64_DAG:
return SelectAtomic64(Node, X86::ATOMSWAP6432);
case ISD::ATOMIC_LOAD_ADD: {
SDNode *RetVal = SelectAtomicLoadAdd(Node, NVT);
if (RetVal)
return RetVal;
break;
}
case ISD::SMUL_LOHI:
case ISD::UMUL_LOHI: {
SDValue N0 = Node->getOperand(0);
SDValue N1 = Node->getOperand(1);
bool isSigned = Opcode == ISD::SMUL_LOHI;
if (!isSigned) {
switch (NVT.getSimpleVT().SimpleTy) {
default: llvm_unreachable("Unsupported VT!");
case MVT::i8: Opc = X86::MUL8r; MOpc = X86::MUL8m; break;
case MVT::i16: Opc = X86::MUL16r; MOpc = X86::MUL16m; break;
case MVT::i32: Opc = X86::MUL32r; MOpc = X86::MUL32m; break;
case MVT::i64: Opc = X86::MUL64r; MOpc = X86::MUL64m; break;
}
} else {
switch (NVT.getSimpleVT().SimpleTy) {
default: llvm_unreachable("Unsupported VT!");
case MVT::i8: Opc = X86::IMUL8r; MOpc = X86::IMUL8m; break;
case MVT::i16: Opc = X86::IMUL16r; MOpc = X86::IMUL16m; break;
case MVT::i32: Opc = X86::IMUL32r; MOpc = X86::IMUL32m; break;
case MVT::i64: Opc = X86::IMUL64r; MOpc = X86::IMUL64m; break;
}
}
unsigned LoReg, HiReg;
switch (NVT.getSimpleVT().SimpleTy) {
default: llvm_unreachable("Unsupported VT!");
case MVT::i8: LoReg = X86::AL; HiReg = X86::AH; break;
case MVT::i16: LoReg = X86::AX; HiReg = X86::DX; break;
case MVT::i32: LoReg = X86::EAX; HiReg = X86::EDX; break;
case MVT::i64: LoReg = X86::RAX; HiReg = X86::RDX; break;
}
SDValue Tmp0, Tmp1, Tmp2, Tmp3, Tmp4;
bool foldedLoad = TryFoldLoad(N, N1, Tmp0, Tmp1, Tmp2, Tmp3, Tmp4);
// Multiply is commmutative.
if (!foldedLoad) {
foldedLoad = TryFoldLoad(N, N0, Tmp0, Tmp1, Tmp2, Tmp3, Tmp4);
if (foldedLoad)
std::swap(N0, N1);
}
SDValue InFlag = CurDAG->getCopyToReg(CurDAG->getEntryNode(), dl, LoReg,
N0, SDValue()).getValue(1);
if (foldedLoad) {
SDValue Ops[] = { Tmp0, Tmp1, Tmp2, Tmp3, Tmp4, N1.getOperand(0),
InFlag };
SDNode *CNode =
CurDAG->getMachineNode(MOpc, dl, MVT::Other, MVT::Flag, Ops,
array_lengthof(Ops));
InFlag = SDValue(CNode, 1);
// Update the chain.
ReplaceUses(N1.getValue(1), SDValue(CNode, 0));
} else {
InFlag =
SDValue(CurDAG->getMachineNode(Opc, dl, MVT::Flag, N1, InFlag), 0);
}
// Copy the low half of the result, if it is needed.
if (!N.getValue(0).use_empty()) {
SDValue Result = CurDAG->getCopyFromReg(CurDAG->getEntryNode(), dl,
LoReg, NVT, InFlag);
InFlag = Result.getValue(2);
ReplaceUses(N.getValue(0), Result);
#ifndef NDEBUG
DEBUG({
errs() << std::string(Indent-2, ' ') << "=> ";
Result.getNode()->dump(CurDAG);
errs() << '\n';
});
#endif
}
// Copy the high half of the result, if it is needed.
if (!N.getValue(1).use_empty()) {
SDValue Result;
if (HiReg == X86::AH && Subtarget->is64Bit()) {
// Prevent use of AH in a REX instruction by referencing AX instead.
// Shift it down 8 bits.
Result = CurDAG->getCopyFromReg(CurDAG->getEntryNode(), dl,
X86::AX, MVT::i16, InFlag);
InFlag = Result.getValue(2);
Result = SDValue(CurDAG->getMachineNode(X86::SHR16ri, dl, MVT::i16,
Result,
CurDAG->getTargetConstant(8, MVT::i8)), 0);
// Then truncate it down to i8.
Result = CurDAG->getTargetExtractSubreg(X86::SUBREG_8BIT, dl,
MVT::i8, Result);
} else {
Result = CurDAG->getCopyFromReg(CurDAG->getEntryNode(), dl,
HiReg, NVT, InFlag);
InFlag = Result.getValue(2);
}
ReplaceUses(N.getValue(1), Result);
#ifndef NDEBUG
DEBUG({
errs() << std::string(Indent-2, ' ') << "=> ";
Result.getNode()->dump(CurDAG);
errs() << '\n';
});
#endif
}
#ifndef NDEBUG
Indent -= 2;
#endif
return NULL;
}
case ISD::SDIVREM:
case ISD::UDIVREM: {
SDValue N0 = Node->getOperand(0);
SDValue N1 = Node->getOperand(1);
bool isSigned = Opcode == ISD::SDIVREM;
if (!isSigned) {
switch (NVT.getSimpleVT().SimpleTy) {
default: llvm_unreachable("Unsupported VT!");
case MVT::i8: Opc = X86::DIV8r; MOpc = X86::DIV8m; break;
case MVT::i16: Opc = X86::DIV16r; MOpc = X86::DIV16m; break;
case MVT::i32: Opc = X86::DIV32r; MOpc = X86::DIV32m; break;
case MVT::i64: Opc = X86::DIV64r; MOpc = X86::DIV64m; break;
}
} else {
switch (NVT.getSimpleVT().SimpleTy) {
default: llvm_unreachable("Unsupported VT!");
case MVT::i8: Opc = X86::IDIV8r; MOpc = X86::IDIV8m; break;
case MVT::i16: Opc = X86::IDIV16r; MOpc = X86::IDIV16m; break;
case MVT::i32: Opc = X86::IDIV32r; MOpc = X86::IDIV32m; break;
case MVT::i64: Opc = X86::IDIV64r; MOpc = X86::IDIV64m; break;
}
}
unsigned LoReg, HiReg;
unsigned ClrOpcode, SExtOpcode;
switch (NVT.getSimpleVT().SimpleTy) {
default: llvm_unreachable("Unsupported VT!");
case MVT::i8:
LoReg = X86::AL; HiReg = X86::AH;
ClrOpcode = 0;
SExtOpcode = X86::CBW;
break;
case MVT::i16:
LoReg = X86::AX; HiReg = X86::DX;
ClrOpcode = X86::MOV16r0;
SExtOpcode = X86::CWD;
break;
case MVT::i32:
LoReg = X86::EAX; HiReg = X86::EDX;
ClrOpcode = X86::MOV32r0;
SExtOpcode = X86::CDQ;
break;
case MVT::i64:
LoReg = X86::RAX; HiReg = X86::RDX;
ClrOpcode = ~0U; // NOT USED.
SExtOpcode = X86::CQO;
break;
}
SDValue Tmp0, Tmp1, Tmp2, Tmp3, Tmp4;
bool foldedLoad = TryFoldLoad(N, N1, Tmp0, Tmp1, Tmp2, Tmp3, Tmp4);
bool signBitIsZero = CurDAG->SignBitIsZero(N0);
SDValue InFlag;
if (NVT == MVT::i8 && (!isSigned || signBitIsZero)) {
// Special case for div8, just use a move with zero extension to AX to
// clear the upper 8 bits (AH).
SDValue Tmp0, Tmp1, Tmp2, Tmp3, Tmp4, Move, Chain;
if (TryFoldLoad(N, N0, Tmp0, Tmp1, Tmp2, Tmp3, Tmp4)) {
SDValue Ops[] = { Tmp0, Tmp1, Tmp2, Tmp3, Tmp4, N0.getOperand(0) };
Move =
SDValue(CurDAG->getMachineNode(X86::MOVZX16rm8, dl, MVT::i16,
MVT::Other, Ops,
array_lengthof(Ops)), 0);
Chain = Move.getValue(1);
ReplaceUses(N0.getValue(1), Chain);
} else {
Move =
SDValue(CurDAG->getMachineNode(X86::MOVZX16rr8, dl, MVT::i16, N0),0);
Chain = CurDAG->getEntryNode();
}
Chain = CurDAG->getCopyToReg(Chain, dl, X86::AX, Move, SDValue());
InFlag = Chain.getValue(1);
} else {
InFlag =
CurDAG->getCopyToReg(CurDAG->getEntryNode(), dl,
LoReg, N0, SDValue()).getValue(1);
if (isSigned && !signBitIsZero) {
// Sign extend the low part into the high part.
InFlag =
SDValue(CurDAG->getMachineNode(SExtOpcode, dl, MVT::Flag, InFlag),0);
} else {
// Zero out the high part, effectively zero extending the input.
SDValue ClrNode;
if (NVT.getSimpleVT() == MVT::i64) {
ClrNode = SDValue(CurDAG->getMachineNode(X86::MOV32r0, dl, MVT::i32),
0);
// We just did a 32-bit clear, insert it into a 64-bit register to
// clear the whole 64-bit reg.
SDValue Zero = CurDAG->getTargetConstant(0, MVT::i64);
SDValue SubRegNo =
CurDAG->getTargetConstant(X86::SUBREG_32BIT, MVT::i32);
ClrNode =
SDValue(CurDAG->getMachineNode(TargetInstrInfo::SUBREG_TO_REG, dl,
MVT::i64, Zero, ClrNode, SubRegNo),
0);
} else {
ClrNode = SDValue(CurDAG->getMachineNode(ClrOpcode, dl, NVT), 0);
}
InFlag = CurDAG->getCopyToReg(CurDAG->getEntryNode(), dl, HiReg,
ClrNode, InFlag).getValue(1);
}
}
if (foldedLoad) {
SDValue Ops[] = { Tmp0, Tmp1, Tmp2, Tmp3, Tmp4, N1.getOperand(0),
InFlag };
SDNode *CNode =
CurDAG->getMachineNode(MOpc, dl, MVT::Other, MVT::Flag, Ops,
array_lengthof(Ops));
InFlag = SDValue(CNode, 1);
// Update the chain.
ReplaceUses(N1.getValue(1), SDValue(CNode, 0));
} else {
InFlag =
SDValue(CurDAG->getMachineNode(Opc, dl, MVT::Flag, N1, InFlag), 0);
}
// Copy the division (low) result, if it is needed.
if (!N.getValue(0).use_empty()) {
SDValue Result = CurDAG->getCopyFromReg(CurDAG->getEntryNode(), dl,
LoReg, NVT, InFlag);
InFlag = Result.getValue(2);
ReplaceUses(N.getValue(0), Result);
#ifndef NDEBUG
DEBUG({
errs() << std::string(Indent-2, ' ') << "=> ";
Result.getNode()->dump(CurDAG);
errs() << '\n';
});
#endif
}
// Copy the remainder (high) result, if it is needed.
if (!N.getValue(1).use_empty()) {
SDValue Result;
if (HiReg == X86::AH && Subtarget->is64Bit()) {
// Prevent use of AH in a REX instruction by referencing AX instead.
// Shift it down 8 bits.
Result = CurDAG->getCopyFromReg(CurDAG->getEntryNode(), dl,
X86::AX, MVT::i16, InFlag);
InFlag = Result.getValue(2);
Result = SDValue(CurDAG->getMachineNode(X86::SHR16ri, dl, MVT::i16,
Result,
CurDAG->getTargetConstant(8, MVT::i8)),
0);
// Then truncate it down to i8.
Result = CurDAG->getTargetExtractSubreg(X86::SUBREG_8BIT, dl,
MVT::i8, Result);
} else {
Result = CurDAG->getCopyFromReg(CurDAG->getEntryNode(), dl,
HiReg, NVT, InFlag);
InFlag = Result.getValue(2);
}
ReplaceUses(N.getValue(1), Result);
#ifndef NDEBUG
DEBUG({
errs() << std::string(Indent-2, ' ') << "=> ";
Result.getNode()->dump(CurDAG);
errs() << '\n';
});
#endif
}
#ifndef NDEBUG
Indent -= 2;
#endif
return NULL;
}
case X86ISD::CMP: {
SDValue N0 = Node->getOperand(0);
SDValue N1 = Node->getOperand(1);
// Look for (X86cmp (and $op, $imm), 0) and see if we can convert it to
// use a smaller encoding.
if (N0.getNode()->getOpcode() == ISD::AND && N0.getNode()->hasOneUse() &&
N0.getValueType() != MVT::i8 &&
X86::isZeroNode(N1)) {
ConstantSDNode *C = dyn_cast<ConstantSDNode>(N0.getNode()->getOperand(1));
if (!C) break;
// For example, convert "testl %eax, $8" to "testb %al, $8"
if ((C->getZExtValue() & ~UINT64_C(0xff)) == 0 &&
(!(C->getZExtValue() & 0x80) ||
HasNoSignedComparisonUses(Node))) {
SDValue Imm = CurDAG->getTargetConstant(C->getZExtValue(), MVT::i8);
SDValue Reg = N0.getNode()->getOperand(0);
// On x86-32, only the ABCD registers have 8-bit subregisters.
if (!Subtarget->is64Bit()) {
TargetRegisterClass *TRC = 0;
switch (N0.getValueType().getSimpleVT().SimpleTy) {
case MVT::i32: TRC = &X86::GR32_ABCDRegClass; break;
case MVT::i16: TRC = &X86::GR16_ABCDRegClass; break;
default: llvm_unreachable("Unsupported TEST operand type!");
}
SDValue RC = CurDAG->getTargetConstant(TRC->getID(), MVT::i32);
Reg = SDValue(CurDAG->getMachineNode(X86::COPY_TO_REGCLASS, dl,
Reg.getValueType(), Reg, RC), 0);
}
// Extract the l-register.
SDValue Subreg = CurDAG->getTargetExtractSubreg(X86::SUBREG_8BIT, dl,
MVT::i8, Reg);
// Emit a testb.
return CurDAG->getMachineNode(X86::TEST8ri, dl, MVT::i32, Subreg, Imm);
}
// For example, "testl %eax, $2048" to "testb %ah, $8".
if ((C->getZExtValue() & ~UINT64_C(0xff00)) == 0 &&
(!(C->getZExtValue() & 0x8000) ||
HasNoSignedComparisonUses(Node))) {
// Shift the immediate right by 8 bits.
SDValue ShiftedImm = CurDAG->getTargetConstant(C->getZExtValue() >> 8,
MVT::i8);
SDValue Reg = N0.getNode()->getOperand(0);
// Put the value in an ABCD register.
TargetRegisterClass *TRC = 0;
switch (N0.getValueType().getSimpleVT().SimpleTy) {
case MVT::i64: TRC = &X86::GR64_ABCDRegClass; break;
case MVT::i32: TRC = &X86::GR32_ABCDRegClass; break;
case MVT::i16: TRC = &X86::GR16_ABCDRegClass; break;
default: llvm_unreachable("Unsupported TEST operand type!");
}
SDValue RC = CurDAG->getTargetConstant(TRC->getID(), MVT::i32);
Reg = SDValue(CurDAG->getMachineNode(X86::COPY_TO_REGCLASS, dl,
Reg.getValueType(), Reg, RC), 0);
// Extract the h-register.
SDValue Subreg = CurDAG->getTargetExtractSubreg(X86::SUBREG_8BIT_HI, dl,
MVT::i8, Reg);
// Emit a testb. No special NOREX tricks are needed since there's
// only one GPR operand!
return CurDAG->getMachineNode(X86::TEST8ri, dl, MVT::i32,
Subreg, ShiftedImm);
}
// For example, "testl %eax, $32776" to "testw %ax, $32776".
if ((C->getZExtValue() & ~UINT64_C(0xffff)) == 0 &&
N0.getValueType() != MVT::i16 &&
(!(C->getZExtValue() & 0x8000) ||
HasNoSignedComparisonUses(Node))) {
SDValue Imm = CurDAG->getTargetConstant(C->getZExtValue(), MVT::i16);
SDValue Reg = N0.getNode()->getOperand(0);
// Extract the 16-bit subregister.
SDValue Subreg = CurDAG->getTargetExtractSubreg(X86::SUBREG_16BIT, dl,
MVT::i16, Reg);
// Emit a testw.
return CurDAG->getMachineNode(X86::TEST16ri, dl, MVT::i32, Subreg, Imm);
}
// For example, "testq %rax, $268468232" to "testl %eax, $268468232".
if ((C->getZExtValue() & ~UINT64_C(0xffffffff)) == 0 &&
N0.getValueType() == MVT::i64 &&
(!(C->getZExtValue() & 0x80000000) ||
HasNoSignedComparisonUses(Node))) {
SDValue Imm = CurDAG->getTargetConstant(C->getZExtValue(), MVT::i32);
SDValue Reg = N0.getNode()->getOperand(0);
// Extract the 32-bit subregister.
SDValue Subreg = CurDAG->getTargetExtractSubreg(X86::SUBREG_32BIT, dl,
MVT::i32, Reg);
// Emit a testl.
return CurDAG->getMachineNode(X86::TEST32ri, dl, MVT::i32, Subreg, Imm);
}
}
break;
}
}
SDNode *ResNode = SelectCode(N);
#ifndef NDEBUG
DEBUG({
errs() << std::string(Indent-2, ' ') << "=> ";
if (ResNode == NULL || ResNode == N.getNode())
N.getNode()->dump(CurDAG);
else
ResNode->dump(CurDAG);
errs() << '\n';
});
Indent -= 2;
#endif
return ResNode;
}
bool X86DAGToDAGISel::
SelectInlineAsmMemoryOperand(const SDValue &Op, char ConstraintCode,
std::vector<SDValue> &OutOps) {
SDValue Op0, Op1, Op2, Op3, Op4;
switch (ConstraintCode) {
case 'o': // offsetable ??
case 'v': // not offsetable ??
default: return true;
case 'm': // memory
if (!SelectAddr(Op, Op, Op0, Op1, Op2, Op3, Op4))
return true;
break;
}
OutOps.push_back(Op0);
OutOps.push_back(Op1);
OutOps.push_back(Op2);
OutOps.push_back(Op3);
OutOps.push_back(Op4);
return false;
}
/// createX86ISelDag - This pass converts a legalized DAG into a
/// X86-specific DAG, ready for instruction scheduling.
///
FunctionPass *llvm::createX86ISelDag(X86TargetMachine &TM,
llvm::CodeGenOpt::Level OptLevel) {
return new X86DAGToDAGISel(TM, OptLevel);
}