7 Commits
Author SHA1 Message Date
Vasanthdev2004 2f0174cc04 fix(node): close review findings on the owner-push default
Every item below was verified against the code before changing it; two of them
were confirmed by running the probe the reviewer described.

A test the fixture sweep missed, and that could not fail
--------------------------------------------------------
`f1_write_cap_is_inert_without_a_resolvable_source_key` seeded `z6f1none` and
pushed as `z6MkF1NoKeyPusher…`, so the owner gate rejected it before it reached
the per-caller cap the test exists to measure. Its assertion was
`!matches!(r, Err(Overloaded(_)))`, which a `Forbidden` satisfies, so it reported
ok while measuring nothing — and it is not `#[cfg(unix)]`, so it did that inside
every green run. Confirmed by inverting the assertion to expect `Forbidden`: it
passed, proving the request stopped at the gate.

The pusher is now the owner, and the assertion is positive: reaching git on the
missing on-disk repo (`Err(Git(_))`) is proof the request cleared both the gate
and the cap. The sibling `f1_write_cap_key_is_per_source_not_per_repo` carried
the same weak negative in its second assertion and is tightened the same way.

The default was barely tested, and what tested it read the environment
---------------------------------------------------------------------
`Config::parse_from` consults the process environment, so on a host exporting
`GITLAWB_ENFORCE_OWNER_PUSH=false` the old `enforce_owner_push_defaults_to_true`
reported the operator's setting rather than what this crate declares — it failed
outright, which would also break any contributor who sets the variable. It is
replaced by two tests that are env-independent and behavioural:

  * `enforce_owner_push_is_declared_true_independent_of_the_environment` reads
    the declared default off `Config::command()`.
  * `default_config_refuses_a_non_owner_push` drives the handler on an untouched
    `test_state` config and asserts 403 — authenticated by a real RFC 9421
    signature, so 403 rather than 401 is what makes it a statement about
    authorization.

Both were checked by reverting `default_value_t` to `false`: the handler test
reports 500 where it wants 403, and the declared test reports `["false"]`.

The cross-tenant test lost its second tenant
--------------------------------------------
The sweep collapsed `u1_parked_push_does_not_shed_another_pusher_behind_the_same
_ip` onto one identity, leaving the test named for cross-tenant behaviour with a
single tenant and two docstrings describing a scenario it no longer ran. `n2` is
now owned by `z6u1nat2` and its push signs as that owner, so two distinct tenants
share one edge IP again — which is the property under test, since the per-source
key is the resolved peer address and never the DID.

Four comments outlived their premise
-------------------------------------
`repos.rs` (3 sites) and `.env.example` still said owner enforcement defaults
off. The IP-keying rationale they support is unchanged and still correct — a DID
farm defeats a DID key — so only the dead premise is rewritten: the cap is
load-bearing because the rate limiter bounds arrival rate rather than occupancy,
because the gate can be turned off for a rolling upgrade, and because one owner
can open many concurrent pushes to their own repo.

Operators on the container path got none of this
-------------------------------------------------
`GITLAWB_ENFORCE_OWNER_PUSH` is now forwarded in `docker-compose.yml`, the macOS
app's bundled compose, and `infra/aws/compose.yaml.tftpl`, defaulting to `true`
to match the node. Without it the rolling-upgrade opt-out this PR documents in
three places was unreachable for anyone running compose.

A cutover this project never promised
--------------------------------------
The README paragraph announcing a 15 September 2026 flip of
`GITLAWB_REQUIRE_SIGNED_PEER_WRITES` is removed. That flag is not changed here,
the date appears nowhere on main, and a PR about a different flag is not where
that commitment would be made. The table row for `GITLAWB_ENFORCE_OWNER_PUSH`
carries the part that belongs.

A docstring that credited the wrong thing
------------------------------------------
The field and test docs claimed the value-taking action is what makes
`GITLAWB_ENFORCE_OWNER_PUSH=false` resolve to `false`. It is not: the env form
resolved under the presence-only declaration too. What the change buys is
`--enforce-owner-push false` parsing at all, rather than erroring as an
unexpected argument. Both docstrings now say so.
2026-08-14 20:43:43 +05:30
beardthelion 803d83efdb fix(node): reap leaked git child processes (#53) (#61)
* fix(docker): reap orphan processes via tini + init, cap pids

The node runs as PID 1 in the container and never reaps reparented
orphans, so git grandchildren (e.g. pack-objects left behind when a
served clone disconnects) accumulate as zombies until fork() fails with
EAGAIN. Run under tini and set compose init: true so reparented orphans
are reaped, and add pids_limit as a blast-radius cap.

Refs #53

* fix(node): reap leaked git child processes (#53)

Serving git over smart-HTTP could leak zombie processes that, over weeks,
exhaust the PID table until fork() fails with EAGAIN and all git
operations break until restart.

The serve path (run_git_service) now runs git in its own process group and
SIGKILLs that group when the request future is dropped (client disconnect)
or returns early, so git and its pack-objects child are torn down together
instead of orphaning the grandchild to PID 1 as a zombie. A drop guard,
disarmed once the request completes cleanly, owns this teardown.

create_issue and build_filtered_pack spawned a std Child and dropped it
unwaited if the stdin write failed (and build_filtered_pack could panic on
a missing stdin handle). Both now always wait the child before surfacing
any error, so the failure path cannot leak.

Adds libc for the group-kill syscall and three regression tests covering
direct-child kill, grandchild reaping via the group, and the disarmed
no-kill path.

Refs #53

* fix(review): reap-then-disarm on serve-path errors; tini/comment nits

Address code-review findings on the #53 fix:

- run_git_service no longer early-returns on a stdin-write error. It captures
  the write result, always reaps the child, then disarms the group guard
  before surfacing the error. Previously a write/wait error path could drop
  the still-armed guard after the child was already reaped, so the group
  SIGKILL could in theory land on a reused pgid. (correctness, reliability,
  adversarial all flagged this region.)
- Drop tini's -g flag: the node manages its own children and graceful
  shutdown, so group-wide signalling would only disturb in-flight git helpers
  on shutdown.
- Correct the SAFETY comment (kill(2) is not relevant to async-signal-safety
  here) and the alive() test-helper comment (EPERM does not read as alive).

* fix(node): SIGTERM (not SIGKILL) the served-git group on disconnect

SIGKILL gave git no chance to run its signal cleanup, so an aborted
receive-pack could leave a stale .git/*.lock that blocks the next push.
SIGTERM lets git remove its lock files before exiting. Signalling the
whole process group still reaches pack-objects directly, so the grandchild
is terminated rather than orphaned, and a single immediate signal avoids
any delayed-kill pid-reuse window.

Refs #53

* docs(node): correct stale SIGKILL comments to SIGTERM in served-git teardown
2026-06-23 10:10:17 +08:00
Vasanth T 0b056f3ad0 [codex] fix Dependabot Rust alerts (#15)
* fix(deps): resolve dependabot rust alerts

* docs: clarify dependabot validation
2026-05-28 16:44:05 +08:00
Vasanth T d366fc6b97 [codex] chore: add live-safe OSS readiness pass (#14)
* chore: add live-safe OSS readiness pass

* fix(node): verify optional peer signatures during rollout

* docs: rewrite README for node roadmap
2026-05-28 15:34:47 +08:00
Rimantas (Rimas) MoceviciusandRimas Mocevicius d09c23da86 feat: macOS menu bar app for managing gitlawb-node Docker Compose stack (#8)
- Menu bar icon with colored status dot (green/yellow/red)
- Start/Stop node via Docker Compose
- Settings UI: ports, public URL, postgres password, auto-sync, operator config
- View Logs window with live docker compose logs
- Auto-start on launch and login (SMAppService)
- Docker detection with install prompt
- Repo root detection via compile-time path for local builds
- Port variables wired through docker-compose.yml for custom port support
- GITLAWB_AUTO_SYNC passthrough for peer replication toggle
- Build script: scripts/build-macos-app.sh (codesign + DMG)

Co-authored-by: Rimas Mocevicius <[email protected]>
2026-05-27 09:37:36 +08:00
Kevin CodexandOpenClaude 068fc76899 fix: nuke dummy binaries + fingerprints before second cargo build
Touch alone wasn't enough — cargo can still reuse cached fingerprint
state from the dependency-cache layer. Explicitly remove the dummy
binaries and their fingerprint dirs so the second build reproduces
real artifacts unconditionally.

Also drop the obsolete `version: '3.9'` from docker-compose.yml.

Co-Authored-By: OpenClaude <[email protected]>
2026-04-29 17:08:43 +08:00
Kevin CodexandOpenClaude 6b9c5278d4 chore: initial public release
Open-source release of the gitlawb node, CLI, and git remote helper.

- gitlawb-node: Axum HTTP server with git smart-HTTP and DID auth
- gl: command-line client (identity, repos, PRs, MCP server)
- git-remote-gitlawb: git remote helper for gitlawb:// URLs
- gitlawb-core: shared crypto primitives (DID, CID, HTTP sigs, UCAN)

Dual licensed under MIT or Apache-2.0.

Co-Authored-By: OpenClaude <[email protected]>
2026-04-29 16:34:27 +08:00