darling-gdb/gdb/mipsread.c

3288 lines
89 KiB
C
Raw Normal View History

1991-03-28 16:26:26 +00:00
/* Read a symbol table in MIPS' format (Third-Eye).
Copyright 1986, 1987, 1989, 1990, 1991, 1992, 1993 Free Software
Foundation, Inc.
Contributed by Alessandro Forin (af@cs.cmu.edu) at CMU. Major work
by Per Bothner, John Gilmore and Ian Lance Taylor at Cygnus Support.
1991-03-28 16:26:26 +00:00
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
1991-03-28 16:26:26 +00:00
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
1991-03-28 16:26:26 +00:00
This program is distributed in the hope that it will be useful,
1991-03-28 16:26:26 +00:00
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
1991-03-28 16:26:26 +00:00
/* This module provides three functions: mipscoff_symfile_init,
which initializes to read a symbol file; mipscoff_new_init, which
discards existing cached information when all symbols are being
discarded; and mipscoff_symfile_read, which reads a symbol table
from a file.
mipscoff_symfile_read only does the minimum work necessary for letting the
user "name" things symbolically; it does not read the entire symtab.
Instead, it reads the external and static symbols and puts them in partial
symbol tables. When more extensive information is requested of a
file, the corresponding partial symbol table is mutated into a full
fledged symbol table by going back and reading the symbols
for real. mipscoff_psymtab_to_symtab() is called indirectly through
a pointer in the psymtab to do this.
ECOFF symbol tables are mostly written in the byte order of the
target machine. However, one section of the table (the auxiliary
symbol information) is written in the host byte order. There is a
bit in the other symbol info which describes which host byte order
was used. ECOFF thereby takes the trophy from Intel `b.out' for
the most brain-dead adaptation of a file format to byte order.
This module can read all four of the known byte-order combinations,
on any type of host. */
#define TM_FILE_OVERRIDE
1991-03-28 16:26:26 +00:00
#include "defs.h"
* config/{a29k, arm, convex, gould, h8300, i386, i860, i960, m68k, m88k, mips, none, ns32k, pa, pyr, romp, rs6000, sparc, tahoe, vax, z8k}: New directories to hold cpu specific configuration files. Naming follows gcc convention. * config/{*.mt, *.mh}: All target and host makefile fragment config files moved to an appropriate config/<cpu> subdirectory. * nm-*, xm-*, tm-*: All native, host, and target files, which get linked to nm.h, xm.h, and tm.h respectively by configure, moved to appropriate config/<cpu> subdirectory. * nm-sysv4.h, xm-sysv4.h, tm-sysv4.h, tm-sunos.h, nm-trash.h: Native, host, and target files that are common across more than one cpu architecture and included by one of the configured native, host, or target files, get moved to config directory. * Makefile.in (INCLUDE_CFLAGS): Add -I${srcdir}/config to pick up native, host, or target include files moved to one of the config subdirectories, and that are included by other files. * Makefile.in (alldeps.mak): Modify to account for new config directory structure. * alldeps.mak, depend: Update for new config directory structure. * config/*/[ntx]m-*.h: Modify all files that include other [ntx]m-*.h files to use path relative to gdb/config. I.E. "a29k/tm-ultra3.h" includes "a29k/tm-29k.h" rather than just "tm-29k.h". * remote-eb.c (tm-29k.h): Include a29k/tm-29k.h. * mipsread.c (tm-mips.h): Include mips/tm-mips.h. * i860-pinsn.c (tm-i860.h): Include i860/tm-i860.h. * configure.in: Default gdb_host_cpu to host_cpu, and remap the ones where the default is not unique or different than the config subdirectory name. Similarly, handle gdb_target_cpu. Modify configure.in as appropriate to make use of gdb_host_cpu and gdb_target_cpu to find makefile fragments and make links.
1993-03-23 01:01:49 +00:00
#include "mips/tm-mips.h"
1991-03-28 16:26:26 +00:00
#include "symtab.h"
#include "gdbtypes.h"
1991-03-28 16:26:26 +00:00
#include "gdbcore.h"
#include "symfile.h"
#include "objfiles.h"
#include "obstack.h"
#include "buildsym.h"
#include "stabsread.h"
#include "complaints.h"
#ifdef USG
#include <sys/types.h>
#define L_SET 0
#define L_INCR 1
#endif
#include <sys/param.h>
#include <sys/file.h>
#include <sys/stat.h>
* gdbtypes.c (create_array_type): Complete rewrite. Now requires a optional type to decorate as an array type, the type of the index, and the bounds of the array. Records this additional info in the array type for use with languages with nonzero array bounds. * gdbtypes.h (enum type_code): Update comment for TYPE_CODE_ARRAY to note that arrays may have bounds. * gdbtypes.h (create_array_type): Update prototype. * c-exp.y (ptype production): Adjust for new create_array_type calling conventions. * coffread.c (decode_type): Call create_array_type rather than handcrafting array types. * convex-tdep.c (value_type): Remove, now use create_array_type. * convex-tdep.c (value_of_trapped_internalvar): Convert calls to vector_type into calls to create_array_type. * dwarfread.c (decode_subscr_data): Name changed to decode_subscript_data_item throughout. * dwarfread.c (decode_subscript_data_item): Rewrite to use create_array_type. Now records index type and range as well. * dwarfread.c (dwarf_read_array_type): Rewrite as part of change to use create_array_type. * dwarfread.c (read_subroutine_type): Test existing user defined types before decorating them, to ensure they are blank, and complain about it if they are not. * dwarfread.c (decode_fund_type): For unrecognized types, always return some valid type (type integer). If the unrecognized type cannot be an implementation defined type, complain as well. * m88k-tdep.c (pushed_size): Update comment for TYPE_CODE_ARRAY. * m88k-tdep.c (store_param): Update comment for TYPE_CODE_ARRAY. * mipsread.c (upgrade_type): Add FIXME comment that code to handcraft arrays should be replaced with call to create_array_type. * stabsread.c (read_array_type): Replace code to handcraft array types with call to create_array_type. * valprint.c (type_print_varspec_prefix): Minor formatting change, join lines that don't need to be split.
1992-12-15 02:52:11 +00:00
#include <string.h>
#include "gdb-stabs.h"
#include "bfd.h"
#include "coff/internal.h"
#include "coff/mips.h" /* COFF-like aspects of ecoff files */
#include "coff/ecoff-ext.h" /* External forms of ecoff sym structures */
/* FIXME: coff/internal.h and aout/aout64.h both define N_ABS. We
want the definition from aout/aout64.h. */
#undef N_ABS
/* FIXME: coff/mips.h and aout/aout64.h both define ZMAGIC. We don't
use it. */
#undef ZMAGIC
#include "libaout.h" /* Private BFD a.out information. */
#include "aout/aout64.h"
#include "aout/stab_gnu.h" /* STABS information */
/* FIXME: libcoff.h and libaout.h both define a couple of macros. We
don't use them. */
#undef exec_hdr
#undef obj_sym_filepos
#include "libcoff.h" /* Private BFD COFF information. */
#include "libecoff.h" /* Private BFD ECOFF information. */
* gdbtypes.c (create_array_type): Complete rewrite. Now requires a optional type to decorate as an array type, the type of the index, and the bounds of the array. Records this additional info in the array type for use with languages with nonzero array bounds. * gdbtypes.h (enum type_code): Update comment for TYPE_CODE_ARRAY to note that arrays may have bounds. * gdbtypes.h (create_array_type): Update prototype. * c-exp.y (ptype production): Adjust for new create_array_type calling conventions. * coffread.c (decode_type): Call create_array_type rather than handcrafting array types. * convex-tdep.c (value_type): Remove, now use create_array_type. * convex-tdep.c (value_of_trapped_internalvar): Convert calls to vector_type into calls to create_array_type. * dwarfread.c (decode_subscr_data): Name changed to decode_subscript_data_item throughout. * dwarfread.c (decode_subscript_data_item): Rewrite to use create_array_type. Now records index type and range as well. * dwarfread.c (dwarf_read_array_type): Rewrite as part of change to use create_array_type. * dwarfread.c (read_subroutine_type): Test existing user defined types before decorating them, to ensure they are blank, and complain about it if they are not. * dwarfread.c (decode_fund_type): For unrecognized types, always return some valid type (type integer). If the unrecognized type cannot be an implementation defined type, complain as well. * m88k-tdep.c (pushed_size): Update comment for TYPE_CODE_ARRAY. * m88k-tdep.c (store_param): Update comment for TYPE_CODE_ARRAY. * mipsread.c (upgrade_type): Add FIXME comment that code to handcraft arrays should be replaced with call to create_array_type. * stabsread.c (read_array_type): Replace code to handcraft array types with call to create_array_type. * valprint.c (type_print_varspec_prefix): Minor formatting change, join lines that don't need to be split.
1992-12-15 02:52:11 +00:00
#include "expression.h"
#include "language.h" /* Needed inside partial-stab.h */
1991-03-28 16:26:26 +00:00
/* Each partial symbol table entry contains a pointer to private data
for the read_symtab() function to use when expanding a partial
symbol table entry to a full symbol table entry.
For mipsread this structure contains the index of the FDR that this
psymtab represents and a pointer to the BFD that the psymtab was
created from. */
#define PST_PRIVATE(p) ((struct symloc *)(p)->read_symtab_private)
#define FDR_IDX(p) (PST_PRIVATE(p)->fdr_idx)
#define CUR_BFD(p) (PST_PRIVATE(p)->cur_bfd)
struct symloc
{
int fdr_idx;
bfd *cur_bfd;
EXTR *extern_tab; /* Pointer to external symbols for this file. */
int extern_count; /* Size of extern_tab. */
struct mips_pending **pending_list;
};
1991-03-28 16:26:26 +00:00
/* Things we import explicitly from other modules */
extern int info_verbose;
1991-03-28 16:26:26 +00:00
/* Various complaints about symbol reading that don't abort the process */
struct complaint bad_file_number_complaint =
{"bad file number %d", 0, 0};
struct complaint index_complaint =
{"bad aux index at symbol %s", 0, 0};
struct complaint aux_index_complaint =
{"bad proc end in aux found from symbol %s", 0, 0};
struct complaint block_index_complaint =
{"bad aux index at block symbol %s", 0, 0};
struct complaint unknown_ext_complaint =
{"unknown external symbol %s", 0, 0};
1991-03-28 16:26:26 +00:00
struct complaint unknown_sym_complaint =
{"unknown local symbol %s", 0, 0};
struct complaint unknown_st_complaint =
{"with type %d", 0, 0};
struct complaint block_overflow_complaint =
{"block containing %s overfilled", 0, 0};
struct complaint basic_type_complaint =
{"cannot map MIPS basic type 0x%x", 0, 0};
struct complaint unknown_type_qual_complaint =
{"unknown type qualifier 0x%x", 0, 0};
struct complaint array_bitsize_complaint =
{"size of array target type not known, assuming %d bits", 0, 0};
struct complaint bad_tag_guess_complaint =
{"guessed tag type of %s incorrectly", 0, 0};
struct complaint block_member_complaint =
{"declaration block contains unhandled symbol type %d", 0, 0};
struct complaint stEnd_complaint =
{"stEnd with storage class %d not handled", 0, 0};
struct complaint unknown_mips_symtype_complaint =
{"unknown symbol type 0x%x", 0, 0};
struct complaint stab_unknown_complaint =
{"unknown stabs symbol %s", 0, 0};
struct complaint pdr_for_nonsymbol_complaint =
{"PDR for %s, but no symbol", 0, 0};
struct complaint pdr_static_symbol_complaint =
{"can't handle PDR for static proc at 0x%x", 0, 0};
struct complaint bad_setjmp_pdr_complaint =
{"fixing bad setjmp PDR from libc", 0, 0};
/* Macros and extra defs */
/* Already-parsed symbols are marked specially */
1991-03-28 16:26:26 +00:00
#define stParsed stType
/* Puns: hard to find whether -g was used and how */
#define MIN_GLEVEL GLEVEL_0
#define compare_glevel(a,b) \
(((a) == GLEVEL_3) ? ((b) < GLEVEL_3) : \
((b) == GLEVEL_3) ? -1 : (int)((b) - (a)))
/* Things that really are local to this module */
* c-exp.y (exp:STRING): Convert C strings into array-of-char constants with an explicit null byte terminator. OP_STRING is now used for real string types. * c-lang.c (builtin_type_*): Move declarations to lang.c since they are used by all languages. * c-lang.c (_initialize_c_language): Move initializations of builtin_type_* to lang.c. * c-typeprint.c (c_type_print_varspec_prefix, c_type_print_varspec_suffix): TYPE_CODE_PASCAL_ARRAY renamed to TYPE_CODE_STRING. * c-valprint.c (c_val_print): Change the way character arrays are printed as strings to be consistent with the way strings are printed when pointer-to-char types are dereferenced. Remove test of print_max before calling val_print_string, which now does it's own test. * eval.c (evaluate_subexp): Add case for OP_ARRAY. * expprint.c (print_subexp, dump_expression): Add case for OP_ARRAY. * expression.h (enum exp_opcode): Add OP_ARRAY and document. * gdbtypes.c (builtin_type_*): Add declarations moved from c-lang.c. * gdbtypes.c (create_string_type): New function to create real string types. * gdbtypes.c (recursive_dump_type): TYPE_CODE_PASCAL_ARRAY renamed to TYPE_CODE_STRING. * gdbtypes.c (_initialize_gdbtypes): Add initializations of builtin_type_* types moved from c-lang.c. * gdbtypes.h (enum type_code): TYPE_CODE_PASCAL_ARRAY renamed to TYPE_CODE_STRING. * gdbtypes.h (builtin_type_string): Add extern declaration. * gdbtypes.h (create_string_type): Add prototype. * m2-lang.c (m2_create_fundamental_type): TYPE_CODE_PASCAL_ARRAY renamed to TYPE_CODE_STRING. * m88k-tdep.c (pushed_size): TYPE_CODE_PASCAL_ARRAY renamed to TYPE_CODE_STRING. * mipsread.c (_initialize_mipsread): TYPE_CODE_PASCAL_ARRAY renamed to TYPE_CODE_STRING. * parse.c (length_of_subexp, prefixify_subexp): Add case for OP_ARRAY. * printcmd.c (print_formatted): Recognize TYPE_CODE_STRING. * typeprint.c (print_type_scalar): TYPE_CODE_PASCAL_ARRAY renamed to TYPE_CODE_STRING. * valops.c (allocate_space_in_inferior): New function and prototype, using code ripped out of value_string. * valops.c (value_string): Rewritten to use new function allocate_space_in_inferior, but temporarily disabled until some other support is in place. * valops.c (value_array): New function to create array constants. * valprint.c (val_print_string): Add comment to document use, complete rewrite to fix several small buglets. * value.h (value_array): Add prototype. * value.h (val_print_string): Change prototype to match rewrite. **** start-sanitize-chill **** * ch-valprint.c (chill_val_print): Add case for TYPE_CODE_STRING. * ch-exp.y (match_character_literal): Disable recognition of control sequence form of character literals and document why. **** end-sanitize-chill ****
1993-01-16 05:15:58 +00:00
/* Remember what we deduced to be the source language of this psymtab. */
static enum language psymtab_language = language_unknown;
/* Current BFD. */
static bfd *cur_bfd;
/* Pointer to current file decriptor record, and its index */
static FDR *cur_fdr;
static int cur_fd;
/* Index of current symbol */
static int cur_sdx;
/* Note how much "debuggable" this image is. We would like
to see at least one FDR with full symbols */
static max_gdbinfo;
static max_glevel;
/* When examining .o files, report on undefined symbols */
static int n_undef_symbols, n_undef_labels, n_undef_vars, n_undef_procs;
/* Pseudo symbol to use when putting stabs into the symbol table. */
static char stabs_symbol[] = STABS_SYMBOL;
/* Extra builtin types */
struct type *builtin_type_complex;
struct type *builtin_type_double_complex;
struct type *builtin_type_fixed_dec;
struct type *builtin_type_float_dec;
struct type *builtin_type_string;
/* Forward declarations */
static void
read_mips_symtab PARAMS ((struct objfile *, struct section_offsets *));
Create and use macros for iterating on symtabs, psymtabs, msymbols. * minsyms.c (iterate_over_msymbols): Remove; clunky and slow. * symfile.h, symtab.h (iterate_over_msymbols): Remove prototype * coffread.c (coff_symfile_read): iterate_over_symtabs => ALL_SYMTABS. (patch_opaque_types): Avoid dummy args and result. * objfiles.c (have_partial_symbols, have_full_symbols, have_minimal_symbols): explicit iteration => ALL_OBJFILES; simplify. (iterate_over_objfiles, iterate_over_symtabs, iterate_over_psymtabs): Remove, clunky and slow. * objfiles.h: Replace iterate_over_* prototypes with ALL_SYMTABS, ALL_PSYMTABS, and ALL_MSYMBOLS macros. * symmisc.c (dump_symtab, dump_psymtab, dump_msymbols, dump_objfile): Remove dummy args and results. Move filename comparisons to callers. (printsyms_command, printpsyms_command, printmsyms_command, printobjfiles_command): iterate_over_* => ALL_*. Compare filenames. * symtab.c (lookup_symtab_1, lookup_symtab, lookup_partial_symtab, lookup_symbol, find_main_psymtab, find_pc_symtab, sources_info, list_symbols, make_symbol_completion_list): Replace explicit iteration with ALL_SYMTABS, ALL_PSYMTABS, or ALL_MSYMBOLS. Eliminate Dijkstra flag crap, break out of loops with gotos. (lookup_symtab_1): Protect '/' tests from short filenames. (cplus_mangled_symbol): Move inline into lookup_symbol. * xcoffexec.c (relocate_objfile_msymbols): Remove poor hack. (relocate_minimal_symbol): Move inline to vmap_symtab. (vmap_symtab): Replace iteration with ALL_OBJFILES, iterate_over_msymbols with ALL_MSYMBOLS. Misc cleanup prior to release. * dwarfread.c (dwarf_build_psymtabs): Remove mainline test. * mipsread.c (compare_symtabs, compare_psymtabs): Remove, unused. * mipsread.c: Add prototypes for all static functions. * symmisc.c (dump_symtab_lines, dump_symtabs, dump_last_symtab, dump_blockvector, dump_block, dump_addrchass, dump_namespace, dump_symbol, dump_type, dump_linetable, dump_strtbl): Remove, unused. * xcoffread.c (dump_symtab_lines, dump_symtabs, dump_last_symtab, dump_blockvector, dump_block, dump_addrchass, dump_namespace, dump_symbol, dump_type, dump_linetable, dump_strtbl): Remove 2nd unused copy! * buildsym.c (define_symbol): Handle global register variables (from Pierre Willard). Complain if register numbers are too large.
1992-03-29 23:17:36 +00:00
static void
read_the_mips_symtab PARAMS ((bfd *));
Create and use macros for iterating on symtabs, psymtabs, msymbols. * minsyms.c (iterate_over_msymbols): Remove; clunky and slow. * symfile.h, symtab.h (iterate_over_msymbols): Remove prototype * coffread.c (coff_symfile_read): iterate_over_symtabs => ALL_SYMTABS. (patch_opaque_types): Avoid dummy args and result. * objfiles.c (have_partial_symbols, have_full_symbols, have_minimal_symbols): explicit iteration => ALL_OBJFILES; simplify. (iterate_over_objfiles, iterate_over_symtabs, iterate_over_psymtabs): Remove, clunky and slow. * objfiles.h: Replace iterate_over_* prototypes with ALL_SYMTABS, ALL_PSYMTABS, and ALL_MSYMBOLS macros. * symmisc.c (dump_symtab, dump_psymtab, dump_msymbols, dump_objfile): Remove dummy args and results. Move filename comparisons to callers. (printsyms_command, printpsyms_command, printmsyms_command, printobjfiles_command): iterate_over_* => ALL_*. Compare filenames. * symtab.c (lookup_symtab_1, lookup_symtab, lookup_partial_symtab, lookup_symbol, find_main_psymtab, find_pc_symtab, sources_info, list_symbols, make_symbol_completion_list): Replace explicit iteration with ALL_SYMTABS, ALL_PSYMTABS, or ALL_MSYMBOLS. Eliminate Dijkstra flag crap, break out of loops with gotos. (lookup_symtab_1): Protect '/' tests from short filenames. (cplus_mangled_symbol): Move inline into lookup_symbol. * xcoffexec.c (relocate_objfile_msymbols): Remove poor hack. (relocate_minimal_symbol): Move inline to vmap_symtab. (vmap_symtab): Replace iteration with ALL_OBJFILES, iterate_over_msymbols with ALL_MSYMBOLS. Misc cleanup prior to release. * dwarfread.c (dwarf_build_psymtabs): Remove mainline test. * mipsread.c (compare_symtabs, compare_psymtabs): Remove, unused. * mipsread.c: Add prototypes for all static functions. * symmisc.c (dump_symtab_lines, dump_symtabs, dump_last_symtab, dump_blockvector, dump_block, dump_addrchass, dump_namespace, dump_symbol, dump_type, dump_linetable, dump_strtbl): Remove, unused. * xcoffread.c (dump_symtab_lines, dump_symtabs, dump_last_symtab, dump_blockvector, dump_block, dump_addrchass, dump_namespace, dump_symbol, dump_type, dump_linetable, dump_strtbl): Remove 2nd unused copy! * buildsym.c (define_symbol): Handle global register variables (from Pierre Willard). Complain if register numbers are too large.
1992-03-29 23:17:36 +00:00
static int
upgrade_type PARAMS ((struct type **, int, union aux_ext *, int));
Create and use macros for iterating on symtabs, psymtabs, msymbols. * minsyms.c (iterate_over_msymbols): Remove; clunky and slow. * symfile.h, symtab.h (iterate_over_msymbols): Remove prototype * coffread.c (coff_symfile_read): iterate_over_symtabs => ALL_SYMTABS. (patch_opaque_types): Avoid dummy args and result. * objfiles.c (have_partial_symbols, have_full_symbols, have_minimal_symbols): explicit iteration => ALL_OBJFILES; simplify. (iterate_over_objfiles, iterate_over_symtabs, iterate_over_psymtabs): Remove, clunky and slow. * objfiles.h: Replace iterate_over_* prototypes with ALL_SYMTABS, ALL_PSYMTABS, and ALL_MSYMBOLS macros. * symmisc.c (dump_symtab, dump_psymtab, dump_msymbols, dump_objfile): Remove dummy args and results. Move filename comparisons to callers. (printsyms_command, printpsyms_command, printmsyms_command, printobjfiles_command): iterate_over_* => ALL_*. Compare filenames. * symtab.c (lookup_symtab_1, lookup_symtab, lookup_partial_symtab, lookup_symbol, find_main_psymtab, find_pc_symtab, sources_info, list_symbols, make_symbol_completion_list): Replace explicit iteration with ALL_SYMTABS, ALL_PSYMTABS, or ALL_MSYMBOLS. Eliminate Dijkstra flag crap, break out of loops with gotos. (lookup_symtab_1): Protect '/' tests from short filenames. (cplus_mangled_symbol): Move inline into lookup_symbol. * xcoffexec.c (relocate_objfile_msymbols): Remove poor hack. (relocate_minimal_symbol): Move inline to vmap_symtab. (vmap_symtab): Replace iteration with ALL_OBJFILES, iterate_over_msymbols with ALL_MSYMBOLS. Misc cleanup prior to release. * dwarfread.c (dwarf_build_psymtabs): Remove mainline test. * mipsread.c (compare_symtabs, compare_psymtabs): Remove, unused. * mipsread.c: Add prototypes for all static functions. * symmisc.c (dump_symtab_lines, dump_symtabs, dump_last_symtab, dump_blockvector, dump_block, dump_addrchass, dump_namespace, dump_symbol, dump_type, dump_linetable, dump_strtbl): Remove, unused. * xcoffread.c (dump_symtab_lines, dump_symtabs, dump_last_symtab, dump_blockvector, dump_block, dump_addrchass, dump_namespace, dump_symbol, dump_type, dump_linetable, dump_strtbl): Remove 2nd unused copy! * buildsym.c (define_symbol): Handle global register variables (from Pierre Willard). Complain if register numbers are too large.
1992-03-29 23:17:36 +00:00
static void
parse_partial_symbols PARAMS ((struct objfile *,
struct section_offsets *));
static int
cross_ref PARAMS ((union aux_ext *, struct type **, enum type_code, char **,
int));
Create and use macros for iterating on symtabs, psymtabs, msymbols. * minsyms.c (iterate_over_msymbols): Remove; clunky and slow. * symfile.h, symtab.h (iterate_over_msymbols): Remove prototype * coffread.c (coff_symfile_read): iterate_over_symtabs => ALL_SYMTABS. (patch_opaque_types): Avoid dummy args and result. * objfiles.c (have_partial_symbols, have_full_symbols, have_minimal_symbols): explicit iteration => ALL_OBJFILES; simplify. (iterate_over_objfiles, iterate_over_symtabs, iterate_over_psymtabs): Remove, clunky and slow. * objfiles.h: Replace iterate_over_* prototypes with ALL_SYMTABS, ALL_PSYMTABS, and ALL_MSYMBOLS macros. * symmisc.c (dump_symtab, dump_psymtab, dump_msymbols, dump_objfile): Remove dummy args and results. Move filename comparisons to callers. (printsyms_command, printpsyms_command, printmsyms_command, printobjfiles_command): iterate_over_* => ALL_*. Compare filenames. * symtab.c (lookup_symtab_1, lookup_symtab, lookup_partial_symtab, lookup_symbol, find_main_psymtab, find_pc_symtab, sources_info, list_symbols, make_symbol_completion_list): Replace explicit iteration with ALL_SYMTABS, ALL_PSYMTABS, or ALL_MSYMBOLS. Eliminate Dijkstra flag crap, break out of loops with gotos. (lookup_symtab_1): Protect '/' tests from short filenames. (cplus_mangled_symbol): Move inline into lookup_symbol. * xcoffexec.c (relocate_objfile_msymbols): Remove poor hack. (relocate_minimal_symbol): Move inline to vmap_symtab. (vmap_symtab): Replace iteration with ALL_OBJFILES, iterate_over_msymbols with ALL_MSYMBOLS. Misc cleanup prior to release. * dwarfread.c (dwarf_build_psymtabs): Remove mainline test. * mipsread.c (compare_symtabs, compare_psymtabs): Remove, unused. * mipsread.c: Add prototypes for all static functions. * symmisc.c (dump_symtab_lines, dump_symtabs, dump_last_symtab, dump_blockvector, dump_block, dump_addrchass, dump_namespace, dump_symbol, dump_type, dump_linetable, dump_strtbl): Remove, unused. * xcoffread.c (dump_symtab_lines, dump_symtabs, dump_last_symtab, dump_blockvector, dump_block, dump_addrchass, dump_namespace, dump_symbol, dump_type, dump_linetable, dump_strtbl): Remove 2nd unused copy! * buildsym.c (define_symbol): Handle global register variables (from Pierre Willard). Complain if register numbers are too large.
1992-03-29 23:17:36 +00:00
static void
fixup_sigtramp PARAMS ((void));
static struct symbol *
new_symbol PARAMS ((char *));
static struct type *
new_type PARAMS ((char *));
static struct block *
new_block PARAMS ((int));
static struct symtab *
new_symtab PARAMS ((char *, int, int, struct objfile *));
static struct linetable *
new_linetable PARAMS ((int));
static struct blockvector *
new_bvect PARAMS ((int));
static struct type *
parse_type PARAMS ((union aux_ext *, int *, int));
static struct symbol *
mylookup_symbol PARAMS ((char *, struct block *, enum namespace,
enum address_class));
static struct block *
shrink_block PARAMS ((struct block *, struct symtab *));
static PTR
xzalloc PARAMS ((unsigned int));
static void
Create and use macros for iterating on symtabs, psymtabs, msymbols. * minsyms.c (iterate_over_msymbols): Remove; clunky and slow. * symfile.h, symtab.h (iterate_over_msymbols): Remove prototype * coffread.c (coff_symfile_read): iterate_over_symtabs => ALL_SYMTABS. (patch_opaque_types): Avoid dummy args and result. * objfiles.c (have_partial_symbols, have_full_symbols, have_minimal_symbols): explicit iteration => ALL_OBJFILES; simplify. (iterate_over_objfiles, iterate_over_symtabs, iterate_over_psymtabs): Remove, clunky and slow. * objfiles.h: Replace iterate_over_* prototypes with ALL_SYMTABS, ALL_PSYMTABS, and ALL_MSYMBOLS macros. * symmisc.c (dump_symtab, dump_psymtab, dump_msymbols, dump_objfile): Remove dummy args and results. Move filename comparisons to callers. (printsyms_command, printpsyms_command, printmsyms_command, printobjfiles_command): iterate_over_* => ALL_*. Compare filenames. * symtab.c (lookup_symtab_1, lookup_symtab, lookup_partial_symtab, lookup_symbol, find_main_psymtab, find_pc_symtab, sources_info, list_symbols, make_symbol_completion_list): Replace explicit iteration with ALL_SYMTABS, ALL_PSYMTABS, or ALL_MSYMBOLS. Eliminate Dijkstra flag crap, break out of loops with gotos. (lookup_symtab_1): Protect '/' tests from short filenames. (cplus_mangled_symbol): Move inline into lookup_symbol. * xcoffexec.c (relocate_objfile_msymbols): Remove poor hack. (relocate_minimal_symbol): Move inline to vmap_symtab. (vmap_symtab): Replace iteration with ALL_OBJFILES, iterate_over_msymbols with ALL_MSYMBOLS. Misc cleanup prior to release. * dwarfread.c (dwarf_build_psymtabs): Remove mainline test. * mipsread.c (compare_symtabs, compare_psymtabs): Remove, unused. * mipsread.c: Add prototypes for all static functions. * symmisc.c (dump_symtab_lines, dump_symtabs, dump_last_symtab, dump_blockvector, dump_block, dump_addrchass, dump_namespace, dump_symbol, dump_type, dump_linetable, dump_strtbl): Remove, unused. * xcoffread.c (dump_symtab_lines, dump_symtabs, dump_last_symtab, dump_blockvector, dump_block, dump_addrchass, dump_namespace, dump_symbol, dump_type, dump_linetable, dump_strtbl): Remove 2nd unused copy! * buildsym.c (define_symbol): Handle global register variables (from Pierre Willard). Complain if register numbers are too large.
1992-03-29 23:17:36 +00:00
sort_blocks PARAMS ((struct symtab *));
static int
compare_blocks PARAMS ((const void *, const void *));
Create and use macros for iterating on symtabs, psymtabs, msymbols. * minsyms.c (iterate_over_msymbols): Remove; clunky and slow. * symfile.h, symtab.h (iterate_over_msymbols): Remove prototype * coffread.c (coff_symfile_read): iterate_over_symtabs => ALL_SYMTABS. (patch_opaque_types): Avoid dummy args and result. * objfiles.c (have_partial_symbols, have_full_symbols, have_minimal_symbols): explicit iteration => ALL_OBJFILES; simplify. (iterate_over_objfiles, iterate_over_symtabs, iterate_over_psymtabs): Remove, clunky and slow. * objfiles.h: Replace iterate_over_* prototypes with ALL_SYMTABS, ALL_PSYMTABS, and ALL_MSYMBOLS macros. * symmisc.c (dump_symtab, dump_psymtab, dump_msymbols, dump_objfile): Remove dummy args and results. Move filename comparisons to callers. (printsyms_command, printpsyms_command, printmsyms_command, printobjfiles_command): iterate_over_* => ALL_*. Compare filenames. * symtab.c (lookup_symtab_1, lookup_symtab, lookup_partial_symtab, lookup_symbol, find_main_psymtab, find_pc_symtab, sources_info, list_symbols, make_symbol_completion_list): Replace explicit iteration with ALL_SYMTABS, ALL_PSYMTABS, or ALL_MSYMBOLS. Eliminate Dijkstra flag crap, break out of loops with gotos. (lookup_symtab_1): Protect '/' tests from short filenames. (cplus_mangled_symbol): Move inline into lookup_symbol. * xcoffexec.c (relocate_objfile_msymbols): Remove poor hack. (relocate_minimal_symbol): Move inline to vmap_symtab. (vmap_symtab): Replace iteration with ALL_OBJFILES, iterate_over_msymbols with ALL_MSYMBOLS. Misc cleanup prior to release. * dwarfread.c (dwarf_build_psymtabs): Remove mainline test. * mipsread.c (compare_symtabs, compare_psymtabs): Remove, unused. * mipsread.c: Add prototypes for all static functions. * symmisc.c (dump_symtab_lines, dump_symtabs, dump_last_symtab, dump_blockvector, dump_block, dump_addrchass, dump_namespace, dump_symbol, dump_type, dump_linetable, dump_strtbl): Remove, unused. * xcoffread.c (dump_symtab_lines, dump_symtabs, dump_last_symtab, dump_blockvector, dump_block, dump_addrchass, dump_namespace, dump_symbol, dump_type, dump_linetable, dump_strtbl): Remove 2nd unused copy! * buildsym.c (define_symbol): Handle global register variables (from Pierre Willard). Complain if register numbers are too large.
1992-03-29 23:17:36 +00:00
static struct partial_symtab *
new_psymtab PARAMS ((char *, struct objfile *));
#if 0
static struct partial_symtab *
parse_fdr PARAMS ((int, int, struct objfile *));
#endif
static void
Create and use macros for iterating on symtabs, psymtabs, msymbols. * minsyms.c (iterate_over_msymbols): Remove; clunky and slow. * symfile.h, symtab.h (iterate_over_msymbols): Remove prototype * coffread.c (coff_symfile_read): iterate_over_symtabs => ALL_SYMTABS. (patch_opaque_types): Avoid dummy args and result. * objfiles.c (have_partial_symbols, have_full_symbols, have_minimal_symbols): explicit iteration => ALL_OBJFILES; simplify. (iterate_over_objfiles, iterate_over_symtabs, iterate_over_psymtabs): Remove, clunky and slow. * objfiles.h: Replace iterate_over_* prototypes with ALL_SYMTABS, ALL_PSYMTABS, and ALL_MSYMBOLS macros. * symmisc.c (dump_symtab, dump_psymtab, dump_msymbols, dump_objfile): Remove dummy args and results. Move filename comparisons to callers. (printsyms_command, printpsyms_command, printmsyms_command, printobjfiles_command): iterate_over_* => ALL_*. Compare filenames. * symtab.c (lookup_symtab_1, lookup_symtab, lookup_partial_symtab, lookup_symbol, find_main_psymtab, find_pc_symtab, sources_info, list_symbols, make_symbol_completion_list): Replace explicit iteration with ALL_SYMTABS, ALL_PSYMTABS, or ALL_MSYMBOLS. Eliminate Dijkstra flag crap, break out of loops with gotos. (lookup_symtab_1): Protect '/' tests from short filenames. (cplus_mangled_symbol): Move inline into lookup_symbol. * xcoffexec.c (relocate_objfile_msymbols): Remove poor hack. (relocate_minimal_symbol): Move inline to vmap_symtab. (vmap_symtab): Replace iteration with ALL_OBJFILES, iterate_over_msymbols with ALL_MSYMBOLS. Misc cleanup prior to release. * dwarfread.c (dwarf_build_psymtabs): Remove mainline test. * mipsread.c (compare_symtabs, compare_psymtabs): Remove, unused. * mipsread.c: Add prototypes for all static functions. * symmisc.c (dump_symtab_lines, dump_symtabs, dump_last_symtab, dump_blockvector, dump_block, dump_addrchass, dump_namespace, dump_symbol, dump_type, dump_linetable, dump_strtbl): Remove, unused. * xcoffread.c (dump_symtab_lines, dump_symtabs, dump_last_symtab, dump_blockvector, dump_block, dump_addrchass, dump_namespace, dump_symbol, dump_type, dump_linetable, dump_strtbl): Remove 2nd unused copy! * buildsym.c (define_symbol): Handle global register variables (from Pierre Willard). Complain if register numbers are too large.
1992-03-29 23:17:36 +00:00
psymtab_to_symtab_1 PARAMS ((struct partial_symtab *, char *));
Create and use macros for iterating on symtabs, psymtabs, msymbols. * minsyms.c (iterate_over_msymbols): Remove; clunky and slow. * symfile.h, symtab.h (iterate_over_msymbols): Remove prototype * coffread.c (coff_symfile_read): iterate_over_symtabs => ALL_SYMTABS. (patch_opaque_types): Avoid dummy args and result. * objfiles.c (have_partial_symbols, have_full_symbols, have_minimal_symbols): explicit iteration => ALL_OBJFILES; simplify. (iterate_over_objfiles, iterate_over_symtabs, iterate_over_psymtabs): Remove, clunky and slow. * objfiles.h: Replace iterate_over_* prototypes with ALL_SYMTABS, ALL_PSYMTABS, and ALL_MSYMBOLS macros. * symmisc.c (dump_symtab, dump_psymtab, dump_msymbols, dump_objfile): Remove dummy args and results. Move filename comparisons to callers. (printsyms_command, printpsyms_command, printmsyms_command, printobjfiles_command): iterate_over_* => ALL_*. Compare filenames. * symtab.c (lookup_symtab_1, lookup_symtab, lookup_partial_symtab, lookup_symbol, find_main_psymtab, find_pc_symtab, sources_info, list_symbols, make_symbol_completion_list): Replace explicit iteration with ALL_SYMTABS, ALL_PSYMTABS, or ALL_MSYMBOLS. Eliminate Dijkstra flag crap, break out of loops with gotos. (lookup_symtab_1): Protect '/' tests from short filenames. (cplus_mangled_symbol): Move inline into lookup_symbol. * xcoffexec.c (relocate_objfile_msymbols): Remove poor hack. (relocate_minimal_symbol): Move inline to vmap_symtab. (vmap_symtab): Replace iteration with ALL_OBJFILES, iterate_over_msymbols with ALL_MSYMBOLS. Misc cleanup prior to release. * dwarfread.c (dwarf_build_psymtabs): Remove mainline test. * mipsread.c (compare_symtabs, compare_psymtabs): Remove, unused. * mipsread.c: Add prototypes for all static functions. * symmisc.c (dump_symtab_lines, dump_symtabs, dump_last_symtab, dump_blockvector, dump_block, dump_addrchass, dump_namespace, dump_symbol, dump_type, dump_linetable, dump_strtbl): Remove, unused. * xcoffread.c (dump_symtab_lines, dump_symtabs, dump_last_symtab, dump_blockvector, dump_block, dump_addrchass, dump_namespace, dump_symbol, dump_type, dump_linetable, dump_strtbl): Remove 2nd unused copy! * buildsym.c (define_symbol): Handle global register variables (from Pierre Willard). Complain if register numbers are too large.
1992-03-29 23:17:36 +00:00
static void
add_block PARAMS ((struct block *, struct symtab *));
static void
add_symbol PARAMS ((struct symbol *, struct block *));
static int
add_line PARAMS ((struct linetable *, int, CORE_ADDR, int));
static struct linetable *
shrink_linetable PARAMS ((struct linetable *));
static char *
mips_next_symbol_text PARAMS ((void));
1991-03-28 16:26:26 +00:00
/* Things we export to other modules */
/* Address bounds for the signal trampoline in inferior, if any */
/* FIXME: Nothing really seems to use this. Why is it here? */
1991-03-28 16:26:26 +00:00
CORE_ADDR sigtramp_address, sigtramp_end;
static void
Create and use macros for iterating on symtabs, psymtabs, msymbols. * minsyms.c (iterate_over_msymbols): Remove; clunky and slow. * symfile.h, symtab.h (iterate_over_msymbols): Remove prototype * coffread.c (coff_symfile_read): iterate_over_symtabs => ALL_SYMTABS. (patch_opaque_types): Avoid dummy args and result. * objfiles.c (have_partial_symbols, have_full_symbols, have_minimal_symbols): explicit iteration => ALL_OBJFILES; simplify. (iterate_over_objfiles, iterate_over_symtabs, iterate_over_psymtabs): Remove, clunky and slow. * objfiles.h: Replace iterate_over_* prototypes with ALL_SYMTABS, ALL_PSYMTABS, and ALL_MSYMBOLS macros. * symmisc.c (dump_symtab, dump_psymtab, dump_msymbols, dump_objfile): Remove dummy args and results. Move filename comparisons to callers. (printsyms_command, printpsyms_command, printmsyms_command, printobjfiles_command): iterate_over_* => ALL_*. Compare filenames. * symtab.c (lookup_symtab_1, lookup_symtab, lookup_partial_symtab, lookup_symbol, find_main_psymtab, find_pc_symtab, sources_info, list_symbols, make_symbol_completion_list): Replace explicit iteration with ALL_SYMTABS, ALL_PSYMTABS, or ALL_MSYMBOLS. Eliminate Dijkstra flag crap, break out of loops with gotos. (lookup_symtab_1): Protect '/' tests from short filenames. (cplus_mangled_symbol): Move inline into lookup_symbol. * xcoffexec.c (relocate_objfile_msymbols): Remove poor hack. (relocate_minimal_symbol): Move inline to vmap_symtab. (vmap_symtab): Replace iteration with ALL_OBJFILES, iterate_over_msymbols with ALL_MSYMBOLS. Misc cleanup prior to release. * dwarfread.c (dwarf_build_psymtabs): Remove mainline test. * mipsread.c (compare_symtabs, compare_psymtabs): Remove, unused. * mipsread.c: Add prototypes for all static functions. * symmisc.c (dump_symtab_lines, dump_symtabs, dump_last_symtab, dump_blockvector, dump_block, dump_addrchass, dump_namespace, dump_symbol, dump_type, dump_linetable, dump_strtbl): Remove, unused. * xcoffread.c (dump_symtab_lines, dump_symtabs, dump_last_symtab, dump_blockvector, dump_block, dump_addrchass, dump_namespace, dump_symbol, dump_type, dump_linetable, dump_strtbl): Remove 2nd unused copy! * buildsym.c (define_symbol): Handle global register variables (from Pierre Willard). Complain if register numbers are too large.
1992-03-29 23:17:36 +00:00
mipscoff_new_init (ignore)
struct objfile *ignore;
1991-03-28 16:26:26 +00:00
{
stabsread_new_init ();
buildsym_new_init ();
1991-03-28 16:26:26 +00:00
}
static void
* coffread.c, mipsread.c, xcoffread.c, coffread.c, dbxread.c, elfread.c (coff_symfile_finish): Add function, prototype, and add to the xxxx_sym_fns struct for each file type. Also reformat the xxxx_sym_fns vector to a standard format and add comments. * coffread.c, mipsread.c, xcoffread.c, coffread.c, dbxread.c, elfread.c (xxx_symfile_new_init, xxx_symfile_init, xxx_symfile_read): Pass pointer to struct objfile rather than pointer to sym_fns. Change references inside each function accordingly. Allocate any symbol file specific info in the per-objfile memory region. * dbxread.c (free_and_init_header_files): Break function into free_header_files(), called from dbx_symfile_finish(), and init_header_files(), called from dbx_new_init(). * dbxread.c (dbx_new_init): Move deallocation things to new dbx_symfile_finish function. * elfread.c (elf_new_init): Call buildsym_new_init(). * objfiles.c (free_objfile): Call the appropriate symfile_finish() routine for the objfile before deallocating other stuff. * sparc-tdep.c (get_longjmp_target): Cast target_read_memory arg. * symfile.h: Move struct sym_fns to before struct objfile def. Add sym_finish function pointer and change prototypes of other function pointers to reflect passing struct objfile pointer rather than struct sym_fns pointer. * symfile.c: Remove now obsolete symtab_fns pointer. * symfile.c (symfile_init): Renamed to find_sym_fns, and now only locates the correct sym_fns struct for the given objfile. * symfile.c (syms_from_objfile, symbol_file_add): Restructured for better support of mapped symbol tables. * symfile.c (symbol_file_command): Remove obsolete code using symfile_fns. * symfile.h: Remove duplicate declarations for symfile_objfile, entry_point, and object_files. * target.c (target_info): Compare symfile_objfile to NULL. * xcoffread.c (aixcoff_new_init): Move deallocation stuff to aixcoff_symfile_finish().
1992-03-19 21:57:15 +00:00
mipscoff_symfile_init (objfile)
struct objfile *objfile;
1991-03-28 16:26:26 +00:00
{
if (objfile->sym_private != NULL)
* coffread.c, mipsread.c, xcoffread.c, coffread.c, dbxread.c, elfread.c (coff_symfile_finish): Add function, prototype, and add to the xxxx_sym_fns struct for each file type. Also reformat the xxxx_sym_fns vector to a standard format and add comments. * coffread.c, mipsread.c, xcoffread.c, coffread.c, dbxread.c, elfread.c (xxx_symfile_new_init, xxx_symfile_init, xxx_symfile_read): Pass pointer to struct objfile rather than pointer to sym_fns. Change references inside each function accordingly. Allocate any symbol file specific info in the per-objfile memory region. * dbxread.c (free_and_init_header_files): Break function into free_header_files(), called from dbx_symfile_finish(), and init_header_files(), called from dbx_new_init(). * dbxread.c (dbx_new_init): Move deallocation things to new dbx_symfile_finish function. * elfread.c (elf_new_init): Call buildsym_new_init(). * objfiles.c (free_objfile): Call the appropriate symfile_finish() routine for the objfile before deallocating other stuff. * sparc-tdep.c (get_longjmp_target): Cast target_read_memory arg. * symfile.h: Move struct sym_fns to before struct objfile def. Add sym_finish function pointer and change prototypes of other function pointers to reflect passing struct objfile pointer rather than struct sym_fns pointer. * symfile.c: Remove now obsolete symtab_fns pointer. * symfile.c (symfile_init): Renamed to find_sym_fns, and now only locates the correct sym_fns struct for the given objfile. * symfile.c (syms_from_objfile, symbol_file_add): Restructured for better support of mapped symbol tables. * symfile.c (symbol_file_command): Remove obsolete code using symfile_fns. * symfile.h: Remove duplicate declarations for symfile_objfile, entry_point, and object_files. * target.c (target_info): Compare symfile_objfile to NULL. * xcoffread.c (aixcoff_new_init): Move deallocation stuff to aixcoff_symfile_finish().
1992-03-19 21:57:15 +00:00
{
mfree (objfile->md, objfile->sym_private);
* coffread.c, mipsread.c, xcoffread.c, coffread.c, dbxread.c, elfread.c (coff_symfile_finish): Add function, prototype, and add to the xxxx_sym_fns struct for each file type. Also reformat the xxxx_sym_fns vector to a standard format and add comments. * coffread.c, mipsread.c, xcoffread.c, coffread.c, dbxread.c, elfread.c (xxx_symfile_new_init, xxx_symfile_init, xxx_symfile_read): Pass pointer to struct objfile rather than pointer to sym_fns. Change references inside each function accordingly. Allocate any symbol file specific info in the per-objfile memory region. * dbxread.c (free_and_init_header_files): Break function into free_header_files(), called from dbx_symfile_finish(), and init_header_files(), called from dbx_new_init(). * dbxread.c (dbx_new_init): Move deallocation things to new dbx_symfile_finish function. * elfread.c (elf_new_init): Call buildsym_new_init(). * objfiles.c (free_objfile): Call the appropriate symfile_finish() routine for the objfile before deallocating other stuff. * sparc-tdep.c (get_longjmp_target): Cast target_read_memory arg. * symfile.h: Move struct sym_fns to before struct objfile def. Add sym_finish function pointer and change prototypes of other function pointers to reflect passing struct objfile pointer rather than struct sym_fns pointer. * symfile.c: Remove now obsolete symtab_fns pointer. * symfile.c (symfile_init): Renamed to find_sym_fns, and now only locates the correct sym_fns struct for the given objfile. * symfile.c (syms_from_objfile, symbol_file_add): Restructured for better support of mapped symbol tables. * symfile.c (symbol_file_command): Remove obsolete code using symfile_fns. * symfile.h: Remove duplicate declarations for symfile_objfile, entry_point, and object_files. * target.c (target_info): Compare symfile_objfile to NULL. * xcoffread.c (aixcoff_new_init): Move deallocation stuff to aixcoff_symfile_finish().
1992-03-19 21:57:15 +00:00
}
objfile->sym_private = NULL;
1991-03-28 16:26:26 +00:00
}
static void
mipscoff_symfile_read (objfile, section_offsets, mainline)
* coffread.c, mipsread.c, xcoffread.c, coffread.c, dbxread.c, elfread.c (coff_symfile_finish): Add function, prototype, and add to the xxxx_sym_fns struct for each file type. Also reformat the xxxx_sym_fns vector to a standard format and add comments. * coffread.c, mipsread.c, xcoffread.c, coffread.c, dbxread.c, elfread.c (xxx_symfile_new_init, xxx_symfile_init, xxx_symfile_read): Pass pointer to struct objfile rather than pointer to sym_fns. Change references inside each function accordingly. Allocate any symbol file specific info in the per-objfile memory region. * dbxread.c (free_and_init_header_files): Break function into free_header_files(), called from dbx_symfile_finish(), and init_header_files(), called from dbx_new_init(). * dbxread.c (dbx_new_init): Move deallocation things to new dbx_symfile_finish function. * elfread.c (elf_new_init): Call buildsym_new_init(). * objfiles.c (free_objfile): Call the appropriate symfile_finish() routine for the objfile before deallocating other stuff. * sparc-tdep.c (get_longjmp_target): Cast target_read_memory arg. * symfile.h: Move struct sym_fns to before struct objfile def. Add sym_finish function pointer and change prototypes of other function pointers to reflect passing struct objfile pointer rather than struct sym_fns pointer. * symfile.c: Remove now obsolete symtab_fns pointer. * symfile.c (symfile_init): Renamed to find_sym_fns, and now only locates the correct sym_fns struct for the given objfile. * symfile.c (syms_from_objfile, symbol_file_add): Restructured for better support of mapped symbol tables. * symfile.c (symbol_file_command): Remove obsolete code using symfile_fns. * symfile.h: Remove duplicate declarations for symfile_objfile, entry_point, and object_files. * target.c (target_info): Compare symfile_objfile to NULL. * xcoffread.c (aixcoff_new_init): Move deallocation stuff to aixcoff_symfile_finish().
1992-03-19 21:57:15 +00:00
struct objfile *objfile;
struct section_offsets *section_offsets;
1991-03-28 16:26:26 +00:00
int mainline;
{
init_minimal_symbol_collection ();
make_cleanup (discard_minimal_symbols, 0);
1991-03-28 16:26:26 +00:00
/* Now that the executable file is positioned at symbol table,
process it and define symbols accordingly. */
read_mips_symtab (objfile, section_offsets);
1991-03-28 16:26:26 +00:00
/* Install any minimal symbols that have been collected as the current
minimal symbols for this objfile. */
1991-03-28 16:26:26 +00:00
* coffread.c, mipsread.c, xcoffread.c, coffread.c, dbxread.c, elfread.c (coff_symfile_finish): Add function, prototype, and add to the xxxx_sym_fns struct for each file type. Also reformat the xxxx_sym_fns vector to a standard format and add comments. * coffread.c, mipsread.c, xcoffread.c, coffread.c, dbxread.c, elfread.c (xxx_symfile_new_init, xxx_symfile_init, xxx_symfile_read): Pass pointer to struct objfile rather than pointer to sym_fns. Change references inside each function accordingly. Allocate any symbol file specific info in the per-objfile memory region. * dbxread.c (free_and_init_header_files): Break function into free_header_files(), called from dbx_symfile_finish(), and init_header_files(), called from dbx_new_init(). * dbxread.c (dbx_new_init): Move deallocation things to new dbx_symfile_finish function. * elfread.c (elf_new_init): Call buildsym_new_init(). * objfiles.c (free_objfile): Call the appropriate symfile_finish() routine for the objfile before deallocating other stuff. * sparc-tdep.c (get_longjmp_target): Cast target_read_memory arg. * symfile.h: Move struct sym_fns to before struct objfile def. Add sym_finish function pointer and change prototypes of other function pointers to reflect passing struct objfile pointer rather than struct sym_fns pointer. * symfile.c: Remove now obsolete symtab_fns pointer. * symfile.c (symfile_init): Renamed to find_sym_fns, and now only locates the correct sym_fns struct for the given objfile. * symfile.c (syms_from_objfile, symbol_file_add): Restructured for better support of mapped symbol tables. * symfile.c (symbol_file_command): Remove obsolete code using symfile_fns. * symfile.h: Remove duplicate declarations for symfile_objfile, entry_point, and object_files. * target.c (target_info): Compare symfile_objfile to NULL. * xcoffread.c (aixcoff_new_init): Move deallocation stuff to aixcoff_symfile_finish().
1992-03-19 21:57:15 +00:00
install_minimal_symbols (objfile);
1991-03-28 16:26:26 +00:00
}
* coffread.c, mipsread.c, xcoffread.c, coffread.c, dbxread.c, elfread.c (coff_symfile_finish): Add function, prototype, and add to the xxxx_sym_fns struct for each file type. Also reformat the xxxx_sym_fns vector to a standard format and add comments. * coffread.c, mipsread.c, xcoffread.c, coffread.c, dbxread.c, elfread.c (xxx_symfile_new_init, xxx_symfile_init, xxx_symfile_read): Pass pointer to struct objfile rather than pointer to sym_fns. Change references inside each function accordingly. Allocate any symbol file specific info in the per-objfile memory region. * dbxread.c (free_and_init_header_files): Break function into free_header_files(), called from dbx_symfile_finish(), and init_header_files(), called from dbx_new_init(). * dbxread.c (dbx_new_init): Move deallocation things to new dbx_symfile_finish function. * elfread.c (elf_new_init): Call buildsym_new_init(). * objfiles.c (free_objfile): Call the appropriate symfile_finish() routine for the objfile before deallocating other stuff. * sparc-tdep.c (get_longjmp_target): Cast target_read_memory arg. * symfile.h: Move struct sym_fns to before struct objfile def. Add sym_finish function pointer and change prototypes of other function pointers to reflect passing struct objfile pointer rather than struct sym_fns pointer. * symfile.c: Remove now obsolete symtab_fns pointer. * symfile.c (symfile_init): Renamed to find_sym_fns, and now only locates the correct sym_fns struct for the given objfile. * symfile.c (syms_from_objfile, symbol_file_add): Restructured for better support of mapped symbol tables. * symfile.c (symbol_file_command): Remove obsolete code using symfile_fns. * symfile.h: Remove duplicate declarations for symfile_objfile, entry_point, and object_files. * target.c (target_info): Compare symfile_objfile to NULL. * xcoffread.c (aixcoff_new_init): Move deallocation stuff to aixcoff_symfile_finish().
1992-03-19 21:57:15 +00:00
/* Perform any local cleanups required when we are done with a particular
objfile. I.E, we are in the process of discarding all symbol information
for an objfile, freeing up all memory held for it, and unlinking the
objfile struct from the global list of known objfiles. */
static void
mipscoff_symfile_finish (objfile)
struct objfile *objfile;
{
if (objfile->sym_private != NULL)
* coffread.c, mipsread.c, xcoffread.c, coffread.c, dbxread.c, elfread.c (coff_symfile_finish): Add function, prototype, and add to the xxxx_sym_fns struct for each file type. Also reformat the xxxx_sym_fns vector to a standard format and add comments. * coffread.c, mipsread.c, xcoffread.c, coffread.c, dbxread.c, elfread.c (xxx_symfile_new_init, xxx_symfile_init, xxx_symfile_read): Pass pointer to struct objfile rather than pointer to sym_fns. Change references inside each function accordingly. Allocate any symbol file specific info in the per-objfile memory region. * dbxread.c (free_and_init_header_files): Break function into free_header_files(), called from dbx_symfile_finish(), and init_header_files(), called from dbx_new_init(). * dbxread.c (dbx_new_init): Move deallocation things to new dbx_symfile_finish function. * elfread.c (elf_new_init): Call buildsym_new_init(). * objfiles.c (free_objfile): Call the appropriate symfile_finish() routine for the objfile before deallocating other stuff. * sparc-tdep.c (get_longjmp_target): Cast target_read_memory arg. * symfile.h: Move struct sym_fns to before struct objfile def. Add sym_finish function pointer and change prototypes of other function pointers to reflect passing struct objfile pointer rather than struct sym_fns pointer. * symfile.c: Remove now obsolete symtab_fns pointer. * symfile.c (symfile_init): Renamed to find_sym_fns, and now only locates the correct sym_fns struct for the given objfile. * symfile.c (syms_from_objfile, symbol_file_add): Restructured for better support of mapped symbol tables. * symfile.c (symbol_file_command): Remove obsolete code using symfile_fns. * symfile.h: Remove duplicate declarations for symfile_objfile, entry_point, and object_files. * target.c (target_info): Compare symfile_objfile to NULL. * xcoffread.c (aixcoff_new_init): Move deallocation stuff to aixcoff_symfile_finish().
1992-03-19 21:57:15 +00:00
{
mfree (objfile->md, objfile->sym_private);
* coffread.c, mipsread.c, xcoffread.c, coffread.c, dbxread.c, elfread.c (coff_symfile_finish): Add function, prototype, and add to the xxxx_sym_fns struct for each file type. Also reformat the xxxx_sym_fns vector to a standard format and add comments. * coffread.c, mipsread.c, xcoffread.c, coffread.c, dbxread.c, elfread.c (xxx_symfile_new_init, xxx_symfile_init, xxx_symfile_read): Pass pointer to struct objfile rather than pointer to sym_fns. Change references inside each function accordingly. Allocate any symbol file specific info in the per-objfile memory region. * dbxread.c (free_and_init_header_files): Break function into free_header_files(), called from dbx_symfile_finish(), and init_header_files(), called from dbx_new_init(). * dbxread.c (dbx_new_init): Move deallocation things to new dbx_symfile_finish function. * elfread.c (elf_new_init): Call buildsym_new_init(). * objfiles.c (free_objfile): Call the appropriate symfile_finish() routine for the objfile before deallocating other stuff. * sparc-tdep.c (get_longjmp_target): Cast target_read_memory arg. * symfile.h: Move struct sym_fns to before struct objfile def. Add sym_finish function pointer and change prototypes of other function pointers to reflect passing struct objfile pointer rather than struct sym_fns pointer. * symfile.c: Remove now obsolete symtab_fns pointer. * symfile.c (symfile_init): Renamed to find_sym_fns, and now only locates the correct sym_fns struct for the given objfile. * symfile.c (syms_from_objfile, symbol_file_add): Restructured for better support of mapped symbol tables. * symfile.c (symbol_file_command): Remove obsolete code using symfile_fns. * symfile.h: Remove duplicate declarations for symfile_objfile, entry_point, and object_files. * target.c (target_info): Compare symfile_objfile to NULL. * xcoffread.c (aixcoff_new_init): Move deallocation stuff to aixcoff_symfile_finish().
1992-03-19 21:57:15 +00:00
}
cur_bfd = 0;
* coffread.c, mipsread.c, xcoffread.c, coffread.c, dbxread.c, elfread.c (coff_symfile_finish): Add function, prototype, and add to the xxxx_sym_fns struct for each file type. Also reformat the xxxx_sym_fns vector to a standard format and add comments. * coffread.c, mipsread.c, xcoffread.c, coffread.c, dbxread.c, elfread.c (xxx_symfile_new_init, xxx_symfile_init, xxx_symfile_read): Pass pointer to struct objfile rather than pointer to sym_fns. Change references inside each function accordingly. Allocate any symbol file specific info in the per-objfile memory region. * dbxread.c (free_and_init_header_files): Break function into free_header_files(), called from dbx_symfile_finish(), and init_header_files(), called from dbx_new_init(). * dbxread.c (dbx_new_init): Move deallocation things to new dbx_symfile_finish function. * elfread.c (elf_new_init): Call buildsym_new_init(). * objfiles.c (free_objfile): Call the appropriate symfile_finish() routine for the objfile before deallocating other stuff. * sparc-tdep.c (get_longjmp_target): Cast target_read_memory arg. * symfile.h: Move struct sym_fns to before struct objfile def. Add sym_finish function pointer and change prototypes of other function pointers to reflect passing struct objfile pointer rather than struct sym_fns pointer. * symfile.c: Remove now obsolete symtab_fns pointer. * symfile.c (symfile_init): Renamed to find_sym_fns, and now only locates the correct sym_fns struct for the given objfile. * symfile.c (syms_from_objfile, symbol_file_add): Restructured for better support of mapped symbol tables. * symfile.c (symbol_file_command): Remove obsolete code using symfile_fns. * symfile.h: Remove duplicate declarations for symfile_objfile, entry_point, and object_files. * target.c (target_info): Compare symfile_objfile to NULL. * xcoffread.c (aixcoff_new_init): Move deallocation stuff to aixcoff_symfile_finish().
1992-03-19 21:57:15 +00:00
}
/* Allocate zeroed memory */
1991-03-28 16:26:26 +00:00
Create and use macros for iterating on symtabs, psymtabs, msymbols. * minsyms.c (iterate_over_msymbols): Remove; clunky and slow. * symfile.h, symtab.h (iterate_over_msymbols): Remove prototype * coffread.c (coff_symfile_read): iterate_over_symtabs => ALL_SYMTABS. (patch_opaque_types): Avoid dummy args and result. * objfiles.c (have_partial_symbols, have_full_symbols, have_minimal_symbols): explicit iteration => ALL_OBJFILES; simplify. (iterate_over_objfiles, iterate_over_symtabs, iterate_over_psymtabs): Remove, clunky and slow. * objfiles.h: Replace iterate_over_* prototypes with ALL_SYMTABS, ALL_PSYMTABS, and ALL_MSYMBOLS macros. * symmisc.c (dump_symtab, dump_psymtab, dump_msymbols, dump_objfile): Remove dummy args and results. Move filename comparisons to callers. (printsyms_command, printpsyms_command, printmsyms_command, printobjfiles_command): iterate_over_* => ALL_*. Compare filenames. * symtab.c (lookup_symtab_1, lookup_symtab, lookup_partial_symtab, lookup_symbol, find_main_psymtab, find_pc_symtab, sources_info, list_symbols, make_symbol_completion_list): Replace explicit iteration with ALL_SYMTABS, ALL_PSYMTABS, or ALL_MSYMBOLS. Eliminate Dijkstra flag crap, break out of loops with gotos. (lookup_symtab_1): Protect '/' tests from short filenames. (cplus_mangled_symbol): Move inline into lookup_symbol. * xcoffexec.c (relocate_objfile_msymbols): Remove poor hack. (relocate_minimal_symbol): Move inline to vmap_symtab. (vmap_symtab): Replace iteration with ALL_OBJFILES, iterate_over_msymbols with ALL_MSYMBOLS. Misc cleanup prior to release. * dwarfread.c (dwarf_build_psymtabs): Remove mainline test. * mipsread.c (compare_symtabs, compare_psymtabs): Remove, unused. * mipsread.c: Add prototypes for all static functions. * symmisc.c (dump_symtab_lines, dump_symtabs, dump_last_symtab, dump_blockvector, dump_block, dump_addrchass, dump_namespace, dump_symbol, dump_type, dump_linetable, dump_strtbl): Remove, unused. * xcoffread.c (dump_symtab_lines, dump_symtabs, dump_last_symtab, dump_blockvector, dump_block, dump_addrchass, dump_namespace, dump_symbol, dump_type, dump_linetable, dump_strtbl): Remove 2nd unused copy! * buildsym.c (define_symbol): Handle global register variables (from Pierre Willard). Complain if register numbers are too large.
1992-03-29 23:17:36 +00:00
static PTR
xzalloc (size)
unsigned int size;
1991-03-28 16:26:26 +00:00
{
PTR p = xmalloc (size);
1991-03-28 16:26:26 +00:00
memset (p, 0, size);
return p;
1991-03-28 16:26:26 +00:00
}
/* Exported procedure: Builds a symtab from the PST partial one.
Restores the environment in effect when PST was created, delegates
most of the work to an ancillary procedure, and sorts
and reorders the symtab list at the end */
static void
mipscoff_psymtab_to_symtab (pst)
struct partial_symtab *pst;
1991-03-28 16:26:26 +00:00
{
if (!pst)
return;
1991-03-28 16:26:26 +00:00
if (info_verbose)
{
printf_filtered ("Reading in symbols for %s...", pst->filename);
fflush (stdout);
}
/* Get the BFD and list of pending typedefs */
cur_bfd = CUR_BFD (pst);
1991-03-28 16:26:26 +00:00
next_symbol_text_func = mips_next_symbol_text;
psymtab_to_symtab_1 (pst, pst->filename);
1991-03-28 16:26:26 +00:00
/* Match with global symbols. This only needs to be done once,
after all of the symtabs and dependencies have been read in. */
scan_file_globals (pst->objfile);
1991-03-28 16:26:26 +00:00
if (info_verbose)
printf_filtered ("done.\n");
1991-03-28 16:26:26 +00:00
}
/* Exported procedure: Is PC in the signal trampoline code */
int
in_sigtramp (pc, ignore)
CORE_ADDR pc;
char *ignore; /* function name */
1991-03-28 16:26:26 +00:00
{
if (sigtramp_address == 0)
fixup_sigtramp ();
return (pc >= sigtramp_address && pc < sigtramp_end);
1991-03-28 16:26:26 +00:00
}
/* File-level interface functions */
/* Read the symtab information from file ABFD into memory. */
static void
read_the_mips_symtab (abfd)
bfd *abfd;
1991-03-28 16:26:26 +00:00
{
if (ecoff_slurp_symbolic_info (abfd) == false)
error ("Error reading symbol table: %s", bfd_errmsg (bfd_error));
1991-03-28 16:26:26 +00:00
}
/* Find a file descriptor given its index RF relative to a file CF */
static FDR *
get_rfd (cf, rf)
int cf, rf;
1991-03-28 16:26:26 +00:00
{
FDR *fdrs;
register FDR *f;
RFDT rfd;
fdrs = ecoff_data (cur_bfd)->fdr;
f = fdrs + cf;
/* Object files do not have the RFD table, all refs are absolute */
if (f->rfdBase == 0)
return fdrs + rf;
ecoff_swap_rfd_in (cur_bfd,
ecoff_data (cur_bfd)->external_rfd + f->rfdBase + rf,
&rfd);
return fdrs + rfd;
1991-03-28 16:26:26 +00:00
}
/* Return a safer print NAME for a file descriptor */
static char *
fdr_name (f)
FDR *f;
1991-03-28 16:26:26 +00:00
{
if (f->rss == -1)
return "<stripped file>";
if (f->rss == 0)
return "<NFY>";
return ecoff_data (cur_bfd)->ss + f->issBase + f->rss;
1991-03-28 16:26:26 +00:00
}
/* Read in and parse the symtab of the file OBJFILE. Symbols from
different sections are relocated via the SECTION_OFFSETS. */
1991-03-28 16:26:26 +00:00
static void
read_mips_symtab (objfile, section_offsets)
struct objfile *objfile;
struct section_offsets *section_offsets;
1991-03-28 16:26:26 +00:00
{
cur_bfd = objfile->obfd;
1991-03-28 16:26:26 +00:00
read_the_mips_symtab (objfile->obfd);
1991-03-28 16:26:26 +00:00
parse_partial_symbols (objfile, section_offsets);
1991-03-28 16:26:26 +00:00
#if 0
/* Check to make sure file was compiled with -g. If not, warn the
user of this limitation. */
if (compare_glevel (max_glevel, GLEVEL_2) < 0)
{
if (max_gdbinfo == 0)
printf ("\n%s not compiled with -g, debugging support is limited.\n",
objfile->name);
printf ("You should compile with -g2 or -g3 for best debugging support.\n");
fflush (stdout);
}
#endif
1991-03-28 16:26:26 +00:00
}
/* Local utilities */
/* Map of FDR indexes to partial symtabs */
struct pst_map
{
struct partial_symtab *pst; /* the psymtab proper */
int n_globals; /* exported globals (external symbols) */
int globals_offset; /* cumulative */
};
1991-03-28 16:26:26 +00:00
/* Utility stack, used to nest procedures and blocks properly.
It is a doubly linked list, to avoid too many alloc/free.
Since we might need it quite a few times it is NOT deallocated
after use. */
static struct parse_stack
{
struct parse_stack *next, *prev;
struct symtab *cur_st; /* Current symtab. */
struct block *cur_block; /* Block in it. */
int blocktype; /* What are we parsing. */
int maxsyms; /* Max symbols in this block. */
struct type *cur_type; /* Type we parse fields for. */
int cur_field; /* Field number in cur_type. */
int procadr; /* Start addres of this procedure */
int numargs; /* Its argument count */
}
*top_stack; /* Top stack ptr */
1991-03-28 16:26:26 +00:00
/* Enter a new lexical context */
static void
push_parse_stack ()
1991-03-28 16:26:26 +00:00
{
struct parse_stack *new;
/* Reuse frames if possible */
if (top_stack && top_stack->prev)
new = top_stack->prev;
else
new = (struct parse_stack *) xzalloc (sizeof (struct parse_stack));
/* Initialize new frame with previous content */
if (top_stack)
{
register struct parse_stack *prev = new->prev;
1991-03-28 16:26:26 +00:00
*new = *top_stack;
top_stack->prev = new;
new->prev = prev;
new->next = top_stack;
}
top_stack = new;
1991-03-28 16:26:26 +00:00
}
/* Exit a lexical context */
static void
pop_parse_stack ()
1991-03-28 16:26:26 +00:00
{
if (!top_stack)
return;
if (top_stack->next)
top_stack = top_stack->next;
1991-03-28 16:26:26 +00:00
}
/* Cross-references might be to things we haven't looked at
yet, e.g. type references. To avoid too many type
duplications we keep a quick fixup table, an array
of lists of references indexed by file descriptor */
static struct mips_pending
{
struct mips_pending *next; /* link */
struct sym_ext *s; /* the symbol */
struct type *t; /* its partial type descriptor */
1991-03-28 16:26:26 +00:00
} **pending_list;
/* Check whether we already saw symbol SH in file FH as undefined */
static struct mips_pending *
is_pending_symbol (fh, sh)
FDR *fh;
struct sym_ext *sh;
1991-03-28 16:26:26 +00:00
{
int f_idx = fh - ecoff_data (cur_bfd)->fdr;
register struct mips_pending *p;
/* Linear search is ok, list is typically no more than 10 deep */
for (p = pending_list[f_idx]; p; p = p->next)
if (p->s == sh)
break;
return p;
1991-03-28 16:26:26 +00:00
}
/* Add a new undef symbol SH of type T */
static void
add_pending (fh, sh, t)
FDR *fh;
struct sym_ext *sh;
struct type *t;
1991-03-28 16:26:26 +00:00
{
int f_idx = fh - ecoff_data (cur_bfd)->fdr;
struct mips_pending *p = is_pending_symbol (fh, sh);
/* Make sure we do not make duplicates */
if (!p)
{
p = (struct mips_pending *) xmalloc (sizeof (*p));
p->s = sh;
p->t = t;
p->next = pending_list[f_idx];
pending_list[f_idx] = p;
}
1991-03-28 16:26:26 +00:00
}
/* Throw away undef entries when done with file index F_IDX */
Create and use macros for iterating on symtabs, psymtabs, msymbols. * minsyms.c (iterate_over_msymbols): Remove; clunky and slow. * symfile.h, symtab.h (iterate_over_msymbols): Remove prototype * coffread.c (coff_symfile_read): iterate_over_symtabs => ALL_SYMTABS. (patch_opaque_types): Avoid dummy args and result. * objfiles.c (have_partial_symbols, have_full_symbols, have_minimal_symbols): explicit iteration => ALL_OBJFILES; simplify. (iterate_over_objfiles, iterate_over_symtabs, iterate_over_psymtabs): Remove, clunky and slow. * objfiles.h: Replace iterate_over_* prototypes with ALL_SYMTABS, ALL_PSYMTABS, and ALL_MSYMBOLS macros. * symmisc.c (dump_symtab, dump_psymtab, dump_msymbols, dump_objfile): Remove dummy args and results. Move filename comparisons to callers. (printsyms_command, printpsyms_command, printmsyms_command, printobjfiles_command): iterate_over_* => ALL_*. Compare filenames. * symtab.c (lookup_symtab_1, lookup_symtab, lookup_partial_symtab, lookup_symbol, find_main_psymtab, find_pc_symtab, sources_info, list_symbols, make_symbol_completion_list): Replace explicit iteration with ALL_SYMTABS, ALL_PSYMTABS, or ALL_MSYMBOLS. Eliminate Dijkstra flag crap, break out of loops with gotos. (lookup_symtab_1): Protect '/' tests from short filenames. (cplus_mangled_symbol): Move inline into lookup_symbol. * xcoffexec.c (relocate_objfile_msymbols): Remove poor hack. (relocate_minimal_symbol): Move inline to vmap_symtab. (vmap_symtab): Replace iteration with ALL_OBJFILES, iterate_over_msymbols with ALL_MSYMBOLS. Misc cleanup prior to release. * dwarfread.c (dwarf_build_psymtabs): Remove mainline test. * mipsread.c (compare_symtabs, compare_psymtabs): Remove, unused. * mipsread.c: Add prototypes for all static functions. * symmisc.c (dump_symtab_lines, dump_symtabs, dump_last_symtab, dump_blockvector, dump_block, dump_addrchass, dump_namespace, dump_symbol, dump_type, dump_linetable, dump_strtbl): Remove, unused. * xcoffread.c (dump_symtab_lines, dump_symtabs, dump_last_symtab, dump_blockvector, dump_block, dump_addrchass, dump_namespace, dump_symbol, dump_type, dump_linetable, dump_strtbl): Remove 2nd unused copy! * buildsym.c (define_symbol): Handle global register variables (from Pierre Willard). Complain if register numbers are too large.
1992-03-29 23:17:36 +00:00
/* FIXME -- storage leak. This is never called!!! --gnu */
1991-03-28 16:26:26 +00:00
#if 0
static void
free_pending (f_idx)
int f_idx;
1991-03-28 16:26:26 +00:00
{
register struct mips_pending *p, *q;
1991-03-28 16:26:26 +00:00
for (p = pending_list[f_idx]; p; p = q)
{
q = p->next;
free ((PTR) p);
}
pending_list[f_idx] = 0;
1991-03-28 16:26:26 +00:00
}
#endif
static char *
prepend_tag_kind (tag_name, type_code)
char *tag_name;
enum type_code type_code;
{
char *prefix;
char *result;
switch (type_code)
{
case TYPE_CODE_ENUM:
prefix = "enum ";
break;
case TYPE_CODE_STRUCT:
prefix = "struct ";
break;
case TYPE_CODE_UNION:
prefix = "union ";
break;
default:
prefix = "";
}
result = (char *) obstack_alloc (&current_objfile->symbol_obstack,
strlen (prefix) + strlen (tag_name) + 1);
sprintf (result, "%s%s", prefix, tag_name);
return result;
}
1991-03-28 16:26:26 +00:00
1991-03-28 16:26:26 +00:00
/* Parsing Routines proper. */
/* Parse a single symbol. Mostly just make up a GDB symbol for it.
For blocks, procedures and types we open a new lexical context.
This is basically just a big switch on the symbol's type. Argument
AX is the base pointer of aux symbols for this file (fh->iauxBase).
EXT_SH points to the unswapped symbol, which is needed for struct,
union, etc., types; it is NULL for an EXTR. BIGEND says whether
aux symbols are big-endian or little-endian. Return count of
SYMR's handled (normally one).
FIXME: This modifies the symbol, but the only way we have to save
the modified information is to stuff it back into the BFD data. */
1991-03-28 16:26:26 +00:00
static int
parse_symbol (sh, ax, ext_sh, bigend)
SYMR *sh;
union aux_ext *ax;
struct sym_ext *ext_sh;
int bigend;
1991-03-28 16:26:26 +00:00
{
char *name;
struct symbol *s;
struct block *b;
struct mips_pending *pend;
struct type *t;
struct field *f;
int count = 1;
enum address_class class;
TIR tir;
if (ext_sh == (struct sym_ext *) NULL)
name = ecoff_data (cur_bfd)->ssext + sh->iss;
else
name = ecoff_data (cur_bfd)->ss + cur_fdr->issBase + sh->iss;
switch (sh->st)
{
case stNil:
break;
case stGlobal: /* external symbol, goes into global block */
class = LOC_STATIC;
b = BLOCKVECTOR_BLOCK (BLOCKVECTOR (top_stack->cur_st),
GLOBAL_BLOCK);
s = new_symbol (name);
SYMBOL_VALUE_ADDRESS (s) = (CORE_ADDR) sh->value;
goto data;
case stStatic: /* static data, goes into current block. */
class = LOC_STATIC;
b = top_stack->cur_block;
s = new_symbol (name);
SYMBOL_VALUE_ADDRESS (s) = (CORE_ADDR) sh->value;
goto data;
case stLocal: /* local variable, goes into current block */
if (sh->sc == scRegister)
{
class = LOC_REGISTER;
if (sh->value > 31)
sh->value += FP0_REGNUM - 32;
}
else
class = LOC_LOCAL;
b = top_stack->cur_block;
s = new_symbol (name);
SYMBOL_VALUE (s) = sh->value;
data: /* Common code for symbols describing data */
SYMBOL_NAMESPACE (s) = VAR_NAMESPACE;
SYMBOL_CLASS (s) = class;
add_symbol (s, b);
/* Type could be missing in a number of cases */
if (sh->sc == scUndefined || sh->sc == scNil ||
sh->index == 0xfffff)
SYMBOL_TYPE (s) = builtin_type_int; /* undefined? */
else
SYMBOL_TYPE (s) = parse_type (ax + sh->index, 0, bigend);
/* Value of a data symbol is its memory address */
break;
case stParam: /* arg to procedure, goes into current block */
max_gdbinfo++;
top_stack->numargs++;
/* Special GNU C++ name. */
if (name[0] == CPLUS_MARKER && name[1] == 't' && name[2] == 0)
name = "this"; /* FIXME, not alloc'd in obstack */
s = new_symbol (name);
SYMBOL_NAMESPACE (s) = VAR_NAMESPACE;
if (sh->sc == scRegister)
{
SYMBOL_CLASS (s) = LOC_REGPARM;
if (sh->value > 31)
sh->value += FP0_REGNUM - 32;
}
else
SYMBOL_CLASS (s) = LOC_ARG;
SYMBOL_VALUE (s) = sh->value;
SYMBOL_TYPE (s) = parse_type (ax + sh->index, 0, bigend);
add_symbol (s, top_stack->cur_block);
#if 0
/* FIXME: This has not been tested. See dbxread.c */
/* Add the type of this parameter to the function/procedure
type of this block. */
add_param_to_type (&top_stack->cur_block->function->type, s);
#endif
break;
case stLabel: /* label, goes into current block */
s = new_symbol (name);
SYMBOL_NAMESPACE (s) = VAR_NAMESPACE; /* so that it can be used */
SYMBOL_CLASS (s) = LOC_LABEL; /* but not misused */
SYMBOL_VALUE_ADDRESS (s) = (CORE_ADDR) sh->value;
SYMBOL_TYPE (s) = builtin_type_int;
add_symbol (s, top_stack->cur_block);
break;
case stProc: /* Procedure, usually goes into global block */
case stStaticProc: /* Static procedure, goes into current block */
s = new_symbol (name);
SYMBOL_NAMESPACE (s) = VAR_NAMESPACE;
SYMBOL_CLASS (s) = LOC_BLOCK;
/* Type of the return value */
if (sh->sc == scUndefined || sh->sc == scNil)
t = builtin_type_int;
else
t = parse_type (ax + sh->index + 1, 0, bigend);
b = top_stack->cur_block;
if (sh->st == stProc)
{
struct blockvector *bv = BLOCKVECTOR (top_stack->cur_st);
/* The next test should normally be true,
but provides a hook for nested functions
(which we don't want to make global). */
if (b == BLOCKVECTOR_BLOCK (bv, STATIC_BLOCK))
b = BLOCKVECTOR_BLOCK (bv, GLOBAL_BLOCK);
}
add_symbol (s, b);
1991-03-28 16:26:26 +00:00
/* Make a type for the procedure itself */
#if 0
/* FIXME: This has not been tested yet! See dbxread.c */
/* Generate a template for the type of this function. The
types of the arguments will be added as we read the symbol
table. */
bcopy (SYMBOL_TYPE (s), lookup_function_type (t), sizeof (struct type));
#else
SYMBOL_TYPE (s) = lookup_function_type (t);
#endif
1991-03-28 16:26:26 +00:00
/* Create and enter a new lexical context */
b = new_block (top_stack->maxsyms);
SYMBOL_BLOCK_VALUE (s) = b;
BLOCK_FUNCTION (b) = s;
BLOCK_START (b) = BLOCK_END (b) = sh->value;
BLOCK_SUPERBLOCK (b) = top_stack->cur_block;
add_block (b, top_stack->cur_st);
/* Not if we only have partial info */
if (sh->sc == scUndefined || sh->sc == scNil)
break;
push_parse_stack ();
top_stack->cur_block = b;
top_stack->blocktype = sh->st;
top_stack->cur_type = SYMBOL_TYPE (s);
top_stack->cur_field = -1;
top_stack->procadr = sh->value;
top_stack->numargs = 0;
sh->value = (long) SYMBOL_TYPE (s);
break;
/* Beginning of code for structure, union, and enum definitions.
They all share a common set of local variables, defined here. */
{
enum type_code type_code;
struct sym_ext *ext_tsym;
int nfields;
long max_value;
struct field *f;
case stStruct: /* Start a block defining a struct type */
type_code = TYPE_CODE_STRUCT;
goto structured_common;
case stUnion: /* Start a block defining a union type */
type_code = TYPE_CODE_UNION;
goto structured_common;
case stEnum: /* Start a block defining an enum type */
type_code = TYPE_CODE_ENUM;
goto structured_common;
case stBlock: /* Either a lexical block, or some type */
if (sh->sc != scInfo)
goto case_stBlock_code; /* Lexical block */
type_code = TYPE_CODE_UNDEF; /* We have a type. */
/* Common code for handling struct, union, enum, and/or as-yet-
unknown-type blocks of info about structured data. `type_code'
has been set to the proper TYPE_CODE, if we know it. */
structured_common:
push_parse_stack ();
top_stack->blocktype = stBlock;
s = new_symbol (name);
SYMBOL_NAMESPACE (s) = STRUCT_NAMESPACE;
SYMBOL_CLASS (s) = LOC_TYPEDEF;
SYMBOL_VALUE (s) = 0;
add_symbol (s, top_stack->cur_block);
/* First count the number of fields and the highest value. */
nfields = 0;
max_value = 0;
for (ext_tsym = ext_sh + 1; ; ext_tsym++)
{
SYMR tsym;
ecoff_swap_sym_in (cur_bfd, ext_tsym, &tsym);
if (tsym.st == stEnd)
break;
if (tsym.st == stMember)
{
if (nfields == 0 && type_code == TYPE_CODE_UNDEF)
/* If the type of the member is Nil (or Void),
without qualifiers, assume the tag is an
enumeration. */
if (tsym.index == indexNil)
type_code = TYPE_CODE_ENUM;
else
{
ecoff_swap_tir_in (bigend,
&ax[tsym.index].a_ti,
&tir);
if ((tir.bt == btNil || tir.bt == btVoid)
&& tir.tq0 == tqNil)
type_code = TYPE_CODE_ENUM;
}
nfields++;
if (tsym.value > max_value)
max_value = tsym.value;
}
else if (tsym.st == stBlock
|| tsym.st == stUnion
|| tsym.st == stEnum
|| tsym.st == stStruct
|| tsym.st == stParsed)
{
if (tsym.sc == scVariant); /*UNIMPLEMENTED*/
if (tsym.index != 0)
{
/* This is something like a struct within a
struct. Skip over the fields of the inner
struct. The -1 is because the for loop will
increment ext_tsym. */
ext_tsym = (ecoff_data (cur_bfd)->external_sym
+ cur_fdr->isymBase
+ tsym.index
- 1);
}
}
else
complain (&block_member_complaint, tsym.st);
}
/* In an stBlock, there is no way to distinguish structs,
unions, and enums at this point. This is a bug in the
original design (that has been fixed with the recent
addition of the stStruct, stUnion, and stEnum symbol
types.) The way you can tell is if/when you see a variable
or field of that type. In that case the variable's type
(in the AUX table) says if the type is struct, union, or
enum, and points back to the stBlock here. So you can
patch the tag kind up later - but only if there actually is
a variable or field of that type.
So until we know for sure, we will guess at this point.
The heuristic is:
If the first member has index==indexNil or a void type,
assume we have an enumeration.
Otherwise, if there is more than one member, and all
the members have offset 0, assume we have a union.
Otherwise, assume we have a struct.
The heuristic could guess wrong in the case of of an
enumeration with no members or a union with one (or zero)
members, or when all except the last field of a struct have
width zero. These are uncommon and/or illegal situations,
and in any case guessing wrong probably doesn't matter
much.
But if we later do find out we were wrong, we fixup the tag
kind. Members of an enumeration must be handled
differently from struct/union fields, and that is harder to
patch up, but luckily we shouldn't need to. (If there are
any enumeration members, we can tell for sure it's an enum
here.) */
if (type_code == TYPE_CODE_UNDEF)
if (nfields > 1 && max_value == 0)
type_code = TYPE_CODE_UNION;
else
type_code = TYPE_CODE_STRUCT;
/* If this type was expected, use its partial definition */
pend = is_pending_symbol (cur_fdr, ext_sh);
if (pend != (struct mips_pending *) NULL)
t = pend->t;
else
t = new_type (prepend_tag_kind (name, type_code));
TYPE_CODE (t) = type_code;
TYPE_LENGTH (t) = sh->value;
TYPE_NFIELDS (t) = nfields;
TYPE_FIELDS (t) = f = ((struct field *)
TYPE_ALLOC (t,
nfields * sizeof (struct field)));
if (type_code == TYPE_CODE_ENUM)
{
/* This is a non-empty enum. */
for (ext_tsym = ext_sh + 1; ; ext_tsym++)
{
SYMR tsym;
struct symbol *enum_sym;
ecoff_swap_sym_in (cur_bfd, ext_tsym, &tsym);
if (tsym.st != stMember)
break;
f->bitpos = tsym.value;
f->type = t;
f->name = (ecoff_data (cur_bfd)->ss
+ cur_fdr->issBase
+ tsym.iss);
f->bitsize = 0;
enum_sym = ((struct symbol *)
obstack_alloc (&current_objfile->symbol_obstack,
sizeof (struct symbol)));
memset ((PTR) enum_sym, 0, sizeof (struct symbol));
SYMBOL_NAME (enum_sym) = f->name;
SYMBOL_CLASS (enum_sym) = LOC_CONST;
SYMBOL_TYPE (enum_sym) = t;
SYMBOL_NAMESPACE (enum_sym) = VAR_NAMESPACE;
SYMBOL_VALUE (enum_sym) = tsym.value;
add_symbol (enum_sym, top_stack->cur_block);
/* Skip the stMembers that we've handled. */
count++;
f++;
}
}
SYMBOL_TYPE (s) = t;
/* make this the current type */
top_stack->cur_type = t;
top_stack->cur_field = 0;
/* Mark that symbol has a type, and say which one */
sh->value = (long) t;
break;
/* End of local variables shared by struct, union, enum, and
block (as yet unknown struct/union/enum) processing. */
}
case_stBlock_code:
/* beginnning of (code) block. Value of symbol
is the displacement from procedure start */
push_parse_stack ();
top_stack->blocktype = stBlock;
b = new_block (top_stack->maxsyms);
BLOCK_START (b) = sh->value + top_stack->procadr;
BLOCK_SUPERBLOCK (b) = top_stack->cur_block;
top_stack->cur_block = b;
add_block (b, top_stack->cur_st);
break;
case stEnd: /* end (of anything) */
if (sh->sc == scInfo)
{
/* Finished with type */
top_stack->cur_type = 0;
}
else if (sh->sc == scText &&
(top_stack->blocktype == stProc ||
top_stack->blocktype == stStaticProc))
{
/* Finished with procedure */
struct blockvector *bv = BLOCKVECTOR (top_stack->cur_st);
struct mips_extra_func_info *e;
struct block *b;
int i;
BLOCK_END (top_stack->cur_block) += sh->value; /* size */
/* Make up special symbol to contain procedure specific info */
s = new_symbol (MIPS_EFI_SYMBOL_NAME);
SYMBOL_NAMESPACE (s) = LABEL_NAMESPACE;
SYMBOL_CLASS (s) = LOC_CONST;
SYMBOL_TYPE (s) = builtin_type_void;
e = ((struct mips_extra_func_info *)
obstack_alloc (&current_objfile->symbol_obstack,
sizeof (struct mips_extra_func_info)));
SYMBOL_VALUE (s) = (int) e;
e->numargs = top_stack->numargs;
add_symbol (s, top_stack->cur_block);
/* Reallocate symbols, saving memory */
b = shrink_block (top_stack->cur_block, top_stack->cur_st);
/* f77 emits proc-level with address bounds==[0,0],
So look for such child blocks, and patch them. */
for (i = 0; i < BLOCKVECTOR_NBLOCKS (bv); i++)
{
struct block *b_bad = BLOCKVECTOR_BLOCK (bv, i);
if (BLOCK_SUPERBLOCK (b_bad) == b
&& BLOCK_START (b_bad) == top_stack->procadr
&& BLOCK_END (b_bad) == top_stack->procadr)
{
BLOCK_START (b_bad) = BLOCK_START (b);
BLOCK_END (b_bad) = BLOCK_END (b);
}
}
}
else if (sh->sc == scText && top_stack->blocktype == stBlock)
{
/* End of (code) block. The value of the symbol is the
displacement from the procedure`s start address of the
end of this block. */
BLOCK_END (top_stack->cur_block) = sh->value + top_stack->procadr;
shrink_block (top_stack->cur_block, top_stack->cur_st);
}
else if (sh->sc == scText && top_stack->blocktype == stFile)
{
/* End of file. Pop parse stack and ignore. Higher
level code deals with this. */
;
1991-03-28 16:26:26 +00:00
}
else
complain (&stEnd_complaint, sh->sc);
pop_parse_stack (); /* restore previous lexical context */
break;
case stMember: /* member of struct or union */
f = &TYPE_FIELDS (top_stack->cur_type)[top_stack->cur_field++];
f->name = name;
f->bitpos = sh->value;
f->bitsize = 0;
f->type = parse_type (ax + sh->index, &f->bitsize, bigend);
break;
case stTypedef: /* type definition */
s = new_symbol (name);
SYMBOL_NAMESPACE (s) = VAR_NAMESPACE;
SYMBOL_CLASS (s) = LOC_TYPEDEF;
SYMBOL_BLOCK_VALUE (s) = top_stack->cur_block;
add_symbol (s, top_stack->cur_block);
SYMBOL_TYPE (s) = parse_type (ax + sh->index, 0, bigend);
sh->value = (long) SYMBOL_TYPE (s);
break;
case stFile: /* file name */
push_parse_stack ();
top_stack->blocktype = sh->st;
break;
/* I`ve never seen these for C */
case stRegReloc:
break; /* register relocation */
case stForward:
break; /* forwarding address */
case stConstant:
break; /* constant */
default:
complain (&unknown_mips_symtype_complaint, sh->st);
break;
}
sh->st = stParsed;
return count;
1991-03-28 16:26:26 +00:00
}
/* Parse the type information provided in the raw AX entries for
the symbol SH. Return the bitfield size in BS, in case.
We must byte-swap the AX entries before we use them; BIGEND says whether
they are big-endian or little-endian (from fh->fBigendian). */
1991-03-28 16:26:26 +00:00
Create and use macros for iterating on symtabs, psymtabs, msymbols. * minsyms.c (iterate_over_msymbols): Remove; clunky and slow. * symfile.h, symtab.h (iterate_over_msymbols): Remove prototype * coffread.c (coff_symfile_read): iterate_over_symtabs => ALL_SYMTABS. (patch_opaque_types): Avoid dummy args and result. * objfiles.c (have_partial_symbols, have_full_symbols, have_minimal_symbols): explicit iteration => ALL_OBJFILES; simplify. (iterate_over_objfiles, iterate_over_symtabs, iterate_over_psymtabs): Remove, clunky and slow. * objfiles.h: Replace iterate_over_* prototypes with ALL_SYMTABS, ALL_PSYMTABS, and ALL_MSYMBOLS macros. * symmisc.c (dump_symtab, dump_psymtab, dump_msymbols, dump_objfile): Remove dummy args and results. Move filename comparisons to callers. (printsyms_command, printpsyms_command, printmsyms_command, printobjfiles_command): iterate_over_* => ALL_*. Compare filenames. * symtab.c (lookup_symtab_1, lookup_symtab, lookup_partial_symtab, lookup_symbol, find_main_psymtab, find_pc_symtab, sources_info, list_symbols, make_symbol_completion_list): Replace explicit iteration with ALL_SYMTABS, ALL_PSYMTABS, or ALL_MSYMBOLS. Eliminate Dijkstra flag crap, break out of loops with gotos. (lookup_symtab_1): Protect '/' tests from short filenames. (cplus_mangled_symbol): Move inline into lookup_symbol. * xcoffexec.c (relocate_objfile_msymbols): Remove poor hack. (relocate_minimal_symbol): Move inline to vmap_symtab. (vmap_symtab): Replace iteration with ALL_OBJFILES, iterate_over_msymbols with ALL_MSYMBOLS. Misc cleanup prior to release. * dwarfread.c (dwarf_build_psymtabs): Remove mainline test. * mipsread.c (compare_symtabs, compare_psymtabs): Remove, unused. * mipsread.c: Add prototypes for all static functions. * symmisc.c (dump_symtab_lines, dump_symtabs, dump_last_symtab, dump_blockvector, dump_block, dump_addrchass, dump_namespace, dump_symbol, dump_type, dump_linetable, dump_strtbl): Remove, unused. * xcoffread.c (dump_symtab_lines, dump_symtabs, dump_last_symtab, dump_blockvector, dump_block, dump_addrchass, dump_namespace, dump_symbol, dump_type, dump_linetable, dump_strtbl): Remove 2nd unused copy! * buildsym.c (define_symbol): Handle global register variables (from Pierre Willard). Complain if register numbers are too large.
1992-03-29 23:17:36 +00:00
static struct type *
parse_type (ax, bs, bigend)
union aux_ext *ax;
int *bs;
int bigend;
1991-03-28 16:26:26 +00:00
{
/* Null entries in this map are treated specially */
static struct type **map_bt[] =
{
&builtin_type_void, /* btNil */
0, /* btAdr */
&builtin_type_char, /* btChar */
&builtin_type_unsigned_char,/* btUChar */
&builtin_type_short, /* btShort */
&builtin_type_unsigned_short, /* btUShort */
&builtin_type_int, /* btInt */
&builtin_type_unsigned_int, /* btUInt */
&builtin_type_long, /* btLong */
&builtin_type_unsigned_long,/* btULong */
&builtin_type_float, /* btFloat */
&builtin_type_double, /* btDouble */
0, /* btStruct */
0, /* btUnion */
0, /* btEnum */
0, /* btTypedef */
0, /* btRange */
0, /* btSet */
&builtin_type_complex, /* btComplex */
&builtin_type_double_complex, /* btDComplex */
0, /* btIndirect */
&builtin_type_fixed_dec, /* btFixedDec */
&builtin_type_float_dec, /* btFloatDec */
&builtin_type_string, /* btString */
0, /* btBit */
0, /* btPicture */
&builtin_type_void, /* btVoid */
&builtin_type_long_long, /* btLongLong */
&builtin_type_unsigned_long_long, /* btULongLong */
};
TIR t[1];
struct type *tp = 0;
char *fmt;
union aux_ext *tax;
enum type_code type_code = TYPE_CODE_UNDEF;
/* Use aux as a type information record, map its basic type. */
tax = ax;
ecoff_swap_tir_in (bigend, &tax->a_ti, t);
if (t->bt > (sizeof (map_bt) / sizeof (*map_bt)))
{
complain (&basic_type_complaint, t->bt);
return builtin_type_int;
}
if (map_bt[t->bt])
{
tp = *map_bt[t->bt];
fmt = "%s";
}
else
{
tp = NULL;
/* Cannot use builtin types -- build our own */
switch (t->bt)
1991-03-28 16:26:26 +00:00
{
case btAdr:
tp = lookup_pointer_type (builtin_type_void);
fmt = "%s";
break;
case btStruct:
type_code = TYPE_CODE_STRUCT;
fmt = "struct %s";
break;
case btUnion:
type_code = TYPE_CODE_UNION;
fmt = "union %s";
break;
case btEnum:
type_code = TYPE_CODE_ENUM;
fmt = "enum %s";
break;
case btRange:
type_code = TYPE_CODE_RANGE;
fmt = "%s";
break;
case btSet:
type_code = TYPE_CODE_SET;
fmt = "set %s";
break;
case btTypedef:
default:
complain (&basic_type_complaint, t->bt);
return builtin_type_int;
1991-03-28 16:26:26 +00:00
}
}
1991-03-28 16:26:26 +00:00
/* Skip over any further type qualifiers (FIXME). */
if (t->continued)
{
/* This is the way it would work if the compiler worked */
TIR t1[1];
do
{
ax++;
ecoff_swap_tir_in (bigend, &ax->a_ti, t1);
1991-03-28 16:26:26 +00:00
}
while (t1->continued);
}
1991-03-28 16:26:26 +00:00
/* Move on to next aux */
ax++;
if (t->fBitfield)
{
*bs = AUX_GET_WIDTH (bigend, ax);
ax++;
}
1991-03-28 16:26:26 +00:00
/* All these types really point to some (common) MIPS type
definition, and only the type-qualifiers fully identify
them. We'll make the same effort at sharing. */
if (t->bt == btIndirect ||
t->bt == btStruct ||
t->bt == btUnion ||
t->bt == btEnum ||
t->bt == btTypedef ||
t->bt == btRange ||
t->bt == btSet)
{
char name[256], *pn;
/* Try to cross reference this type */
ax += cross_ref (ax, &tp, type_code, &pn, bigend);
/* reading .o file ? */
if (tp == (struct type *) NULL)
tp = init_type (type_code, 0, 0, (char *) NULL,
(struct objfile *) NULL);
/* SOMEONE OUGHT TO FIX DBXREAD TO DROP "STRUCT" */
sprintf (name, fmt, pn);
/* Usually, TYPE_CODE(tp) is already type_code. The main
exception is if we guessed wrong re struct/union/enum. */
if (TYPE_CODE (tp) != type_code)
{
complain (&bad_tag_guess_complaint, name);
TYPE_CODE (tp) = type_code;
1991-03-28 16:26:26 +00:00
}
if (TYPE_NAME (tp) == NULL || !STREQ (TYPE_NAME (tp), name))
TYPE_NAME (tp) = obsavestring (name, strlen (name),
&current_objfile->type_obstack);
}
1991-03-28 16:26:26 +00:00
/* Deal with range types */
if (t->bt == btRange)
{
TYPE_NFIELDS (tp) = 2;
TYPE_FIELDS (tp) = ((struct field *)
TYPE_ALLOC (tp, 2 * sizeof (struct field)));
TYPE_FIELD_NAME (tp, 0) = obsavestring ("Low", strlen ("Low"),
&current_objfile->type_obstack);
TYPE_FIELD_BITPOS (tp, 0) = AUX_GET_DNLOW (bigend, ax);
ax++;
TYPE_FIELD_NAME (tp, 1) = obsavestring ("High", strlen ("High"),
&current_objfile->type_obstack);
TYPE_FIELD_BITPOS (tp, 1) = AUX_GET_DNHIGH (bigend, ax);
ax++;
}
1991-03-28 16:26:26 +00:00
/* Parse all the type qualifiers now. If there are more
than 6 the game will continue in the next aux */
1991-03-28 16:26:26 +00:00
#define PARSE_TQ(tq) \
if (t->tq != tqNil) ax += upgrade_type(&tp, t->tq, ax, bigend);
1991-03-28 16:26:26 +00:00
again:PARSE_TQ (tq0);
PARSE_TQ (tq1);
PARSE_TQ (tq2);
PARSE_TQ (tq3);
PARSE_TQ (tq4);
PARSE_TQ (tq5);
1991-03-28 16:26:26 +00:00
#undef PARSE_TQ
if (t->continued)
{
tax++;
ecoff_swap_tir_in (bigend, &tax->a_ti, t);
goto again;
}
return tp;
1991-03-28 16:26:26 +00:00
}
/* Make up a complex type from a basic one. Type is passed by
reference in TPP and side-effected as necessary. The type
qualifier TQ says how to handle the aux symbols at AX for
the symbol SX we are currently analyzing. BIGEND says whether
aux symbols are big-endian or little-endian.
1991-03-28 16:26:26 +00:00
Returns the number of aux symbols we parsed. */
static int
upgrade_type (tpp, tq, ax, bigend)
struct type **tpp;
int tq;
union aux_ext *ax;
int bigend;
1991-03-28 16:26:26 +00:00
{
int off;
struct type *t;
/* Used in array processing */
int rf, id;
FDR *fh;
struct type *range;
struct type *indx;
int lower, upper;
RNDXR rndx;
switch (tq)
{
case tqPtr:
t = lookup_pointer_type (*tpp);
*tpp = t;
return 0;
case tqProc:
t = lookup_function_type (*tpp);
*tpp = t;
return 0;
case tqArray:
off = 0;
/* Determine and record the domain type (type of index) */
ecoff_swap_rndx_in (bigend, &ax->a_rndx, &rndx);
id = rndx.index;
rf = rndx.rfd;
if (rf == 0xfff)
{
ax++;
rf = AUX_GET_ISYM (bigend, ax);
off++;
}
fh = get_rfd (cur_fd, rf);
indx = parse_type ((ecoff_data (cur_bfd)->external_aux
+ fh->iauxBase
+ id),
(int *) NULL, bigend);
/* Get the bounds, and create the array type. */
ax++;
lower = AUX_GET_DNLOW (bigend, ax);
ax++;
upper = AUX_GET_DNHIGH (bigend, ax);
ax++;
rf = AUX_GET_WIDTH (bigend, ax); /* bit size of array element */
range = create_range_type ((struct type *) NULL, indx,
lower, upper);
t = create_array_type ((struct type *) NULL, *tpp, range);
/* Check whether supplied array element bit size matches
the known size of the element type. If this complaint
ends up not happening, we can remove this code. It's
here because we aren't sure we understand this *&%&$
symbol format. */
id = TYPE_LENGTH (TYPE_TARGET_TYPE (t)) << 3; /* bitsize */
if (id == 0)
{
/* Most likely an undefined type */
id = rf;
TYPE_LENGTH (TYPE_TARGET_TYPE (t)) = id >> 3;
}
if (id != rf)
complain (&array_bitsize_complaint, rf);
*tpp = t;
return 4 + off;
1991-03-28 16:26:26 +00:00
case tqVol:
/* Volatile -- currently ignored */
return 0;
case tqConst:
/* Const -- currently ignored */
return 0;
default:
complain (&unknown_type_qual_complaint, tq);
return 0;
}
1991-03-28 16:26:26 +00:00
}
/* Parse a procedure descriptor record PR. Note that the procedure is
parsed _after_ the local symbols, now we just insert the extra
information we need into a MIPS_EFI_SYMBOL_NAME symbol that has
already been placed in the procedure's main block. Note also that
images that have been partially stripped (ld -x) have been deprived
of local symbols, and we have to cope with them here. FIRST_OFF is
the offset of the first procedure for this FDR; we adjust the
address by this amount, but I don't know why. */
1991-03-28 16:26:26 +00:00
static void
parse_procedure (pr, have_stabs, first_off)
PDR *pr;
int have_stabs;
unsigned long first_off;
1991-03-28 16:26:26 +00:00
{
struct symbol *s, *i;
struct block *b;
struct mips_extra_func_info *e;
char *sh_name;
/* Simple rule to find files linked "-x" */
if (cur_fdr->rss == -1)
{
if (pr->isym == -1)
{
/* Static procedure at address pr->adr. Sigh. */
complain (&pdr_static_symbol_complaint, pr->adr);
return;
}
else
{
/* external */
EXTR she;
ecoff_swap_ext_in (cur_bfd,
ecoff_data (cur_bfd)->external_ext + pr->isym,
&she);
sh_name = ecoff_data (cur_bfd)->ssext + she.asym.iss;
}
}
else
{
/* Full symbols */
SYMR sh;
ecoff_swap_sym_in (cur_bfd,
(ecoff_data (cur_bfd)->external_sym
+ cur_fdr->isymBase
+ pr->isym),
&sh);
sh_name = ecoff_data (cur_bfd)->ss + cur_fdr->issBase + sh.iss;
}
if (have_stabs)
{
/* We have to save the cur_fdr across the call to lookup_symbol.
If the pdr is for a static function and if a global function with
the same name exists, lookup_symbol will eventually read in the symtab
for the global function and clobber cur_fdr. */
FDR *save_cur_fdr = cur_fdr;
s = lookup_symbol (sh_name, NULL, VAR_NAMESPACE, 0, NULL);
cur_fdr = save_cur_fdr;
}
else
s = mylookup_symbol (sh_name, top_stack->cur_block,
VAR_NAMESPACE, LOC_BLOCK);
if (s != 0)
{
b = SYMBOL_BLOCK_VALUE (s);
}
else
{
complain (&pdr_for_nonsymbol_complaint, sh_name);
#if 1
return;
#else
/* FIXME -- delete. We can't do symbol allocation now; it's all done. */
s = new_symbol (sh_name);
SYMBOL_NAMESPACE (s) = VAR_NAMESPACE;
SYMBOL_CLASS (s) = LOC_BLOCK;
/* Donno its type, hope int is ok */
SYMBOL_TYPE (s) = lookup_function_type (builtin_type_int);
add_symbol (s, top_stack->cur_block);
/* Wont have symbols for this one */
b = new_block (2);
SYMBOL_BLOCK_VALUE (s) = b;
BLOCK_FUNCTION (b) = s;
BLOCK_START (b) = pr->adr;
/* BOUND used to be the end of procedure's text, but the
argument is no longer passed in. */
BLOCK_END (b) = bound;
BLOCK_SUPERBLOCK (b) = top_stack->cur_block;
add_block (b, top_stack->cur_st);
#endif
}
i = mylookup_symbol (MIPS_EFI_SYMBOL_NAME, b, LABEL_NAMESPACE, LOC_CONST);
if (i)
{
e = (struct mips_extra_func_info *) SYMBOL_VALUE (i);
e->pdr = *pr;
e->pdr.isym = (long) s;
e->pdr.adr += cur_fdr->adr - first_off;
/* Correct incorrect setjmp procedure descriptor from the library
to make backtrace through setjmp work. */
if (e->pdr.pcreg == 0 && strcmp (sh_name, "setjmp") == 0)
{
complain (&bad_setjmp_pdr_complaint, 0);
e->pdr.pcreg = RA_REGNUM;
e->pdr.regmask = 0x80000000;
e->pdr.regoffset = -4;
}
}
1991-03-28 16:26:26 +00:00
}
/* Parse the external symbol ES. Just call parse_symbol() after
making sure we know where the aux are for it. For procedures,
parsing of the PDRs has already provided all the needed
information, we only parse them if SKIP_PROCEDURES is false,
and only if this causes no symbol duplication.
BIGEND says whether aux entries are big-endian or little-endian.
This routine clobbers top_stack->cur_block and ->cur_st. */
1991-03-28 16:26:26 +00:00
static void
parse_external (es, skip_procedures, bigend)
EXTR *es;
int skip_procedures;
int bigend;
1991-03-28 16:26:26 +00:00
{
union aux_ext *ax;
1991-03-28 16:26:26 +00:00
if (es->ifd != ifdNil)
{
cur_fd = es->ifd;
cur_fdr = ecoff_data (cur_bfd)->fdr + cur_fd;
ax = ecoff_data (cur_bfd)->external_aux + cur_fdr->iauxBase;
}
else
{
cur_fdr = ecoff_data (cur_bfd)->fdr;
ax = 0;
}
1991-03-28 16:26:26 +00:00
/* Reading .o files */
if (es->asym.sc == scUndefined || es->asym.sc == scNil)
{
char *what;
switch (es->asym.st)
{
case stStaticProc:
1991-03-28 16:26:26 +00:00
case stProc:
what = "procedure";
n_undef_procs++;
break;
1991-03-28 16:26:26 +00:00
case stGlobal:
what = "variable";
n_undef_vars++;
break;
1991-03-28 16:26:26 +00:00
case stLabel:
what = "label";
n_undef_labels++;
break;
default:
what = "symbol";
break;
}
n_undef_symbols++;
/* FIXME: Turn this into a complaint? */
if (info_verbose)
printf_filtered ("Warning: %s `%s' is undefined (in %s)\n",
what,
ecoff_data (cur_bfd)->ssext + es->asym.iss,
fdr_name (cur_fdr));
return;
}
switch (es->asym.st)
{
case stProc:
/* If we have full symbols we do not need more */
if (skip_procedures)
return;
if (mylookup_symbol (ecoff_data (cur_bfd)->ssext + es->asym.iss,
top_stack->cur_block,
VAR_NAMESPACE, LOC_BLOCK))
break;
/* fall through */
case stGlobal:
case stLabel:
/* Note that the case of a symbol with indexNil must be handled
anyways by parse_symbol(). */
parse_symbol (&es->asym, ax, (struct sym_ext *) NULL, bigend);
/* Note that parse_symbol changed es->asym. */
break;
default:
break;
}
1991-03-28 16:26:26 +00:00
}
/* Parse the line number info for file descriptor FH into
GDB's linetable LT. MIPS' encoding requires a little bit
of magic to get things out. Note also that MIPS' line
numbers can go back and forth, apparently we can live
with that and do not need to reorder our linetables */
static void
parse_lines (fh, pr, lt)
FDR *fh;
PDR *pr;
struct linetable *lt;
1991-03-28 16:26:26 +00:00
{
unsigned char *base;
int j, k;
int delta, count, lineno = 0;
unsigned long first_off = pr->adr;
if (fh->cbLineOffset == 0)
return;
base = ecoff_data (cur_bfd)->line + fh->cbLineOffset;
/* Scan by procedure descriptors */
k = 0;
for (j = 0; j < fh->cpd; j++, pr++)
{
int l, halt;
unsigned long adr;
/* No code for this one */
if (pr->iline == ilineNil ||
pr->lnLow == -1 || pr->lnHigh == -1)
continue;
/* Aurgh! To know where to stop expanding we must look-ahead. */
for (l = 1; l < (fh->cpd - j); l++)
if (pr[l].iline != -1)
break;
if (l == (fh->cpd - j))
halt = fh->cline;
else
halt = pr[l].iline;
/* When procedures are moved around the linenumbers are
attributed to the next procedure up. */
if (pr->iline >= halt)
continue;
base = ecoff_data (cur_bfd)->line + fh->cbLineOffset + pr->cbLineOffset;
adr = fh->adr + pr->adr - first_off;
l = adr >> 2; /* in words */
halt += (adr >> 2) - pr->iline;
for (lineno = pr->lnLow; l < halt;)
{
count = *base & 0x0f;
delta = *base++ >> 4;
if (delta >= 8)
delta -= 16;
if (delta == -8)
{
delta = (base[0] << 8) | base[1];
if (delta >= 0x8000)
delta -= 0x10000;
base += 2;
}
lineno += delta; /* first delta is 0 */
k = add_line (lt, lineno, l, k);
l += count + 1;
1991-03-28 16:26:26 +00:00
}
}
1991-03-28 16:26:26 +00:00
}
/* Master parsing procedure for first-pass reading of file symbols
into a partial_symtab. */
1991-03-28 16:26:26 +00:00
static void
parse_partial_symbols (objfile, section_offsets)
struct objfile *objfile;
struct section_offsets *section_offsets;
1991-03-28 16:26:26 +00:00
{
int f_idx, s_idx;
HDRR *hdr = &ecoff_data (cur_bfd)->symbolic_header;
/* Running pointers */
FDR *fh;
struct ext_ext *ext_out;
struct ext_ext *ext_out_end;
EXTR *ext_block;
register EXTR *ext_in;
EXTR *ext_in_end;
SYMR sh;
struct partial_symtab *pst;
int past_first_source_file = 0;
/* List of current psymtab's include files */
char **psymtab_include_list;
int includes_allocated;
int includes_used;
EXTR *extern_tab;
struct pst_map *fdr_to_pst;
/* Index within current psymtab dependency list */
struct partial_symtab **dependency_list;
int dependencies_used, dependencies_allocated;
struct cleanup *old_chain;
char *name;
extern_tab = (EXTR *) obstack_alloc (&objfile->psymbol_obstack,
sizeof (EXTR) * hdr->iextMax);
includes_allocated = 30;
includes_used = 0;
psymtab_include_list = (char **) alloca (includes_allocated *
sizeof (char *));
next_symbol_text_func = mips_next_symbol_text;
dependencies_allocated = 30;
dependencies_used = 0;
dependency_list =
(struct partial_symtab **) alloca (dependencies_allocated *
sizeof (struct partial_symtab *));
last_source_file = NULL;
/*
* Big plan:
*
* Only parse the Local and External symbols, and the Relative FDR.
* Fixup enough of the loader symtab to be able to use it.
* Allocate space only for the file's portions we need to
* look at. (XXX)
*/
max_gdbinfo = 0;
max_glevel = MIN_GLEVEL;
/* Allocate the map FDR -> PST.
Minor hack: -O3 images might claim some global data belongs
to FDR -1. We`ll go along with that */
fdr_to_pst = (struct pst_map *) xzalloc ((hdr->ifdMax + 1) * sizeof *fdr_to_pst);
old_chain = make_cleanup (free, fdr_to_pst);
fdr_to_pst++;
{
struct partial_symtab *pst = new_psymtab ("", objfile);
fdr_to_pst[-1].pst = pst;
FDR_IDX (pst) = -1;
}
/* Pass 0 over external syms: swap them in. */
ext_block = (EXTR *) xmalloc (hdr->iextMax * sizeof (EXTR));
make_cleanup (free, ext_block);
ext_out = ecoff_data (cur_bfd)->external_ext;
ext_out_end = ext_out + hdr->iextMax;
ext_in = ext_block;
for (; ext_out < ext_out_end; ext_out++, ext_in++)
ecoff_swap_ext_in (cur_bfd, ext_out, ext_in);
/* Pass 1 over external syms: Presize and partition the list */
ext_in = ext_block;
ext_in_end = ext_in + hdr->iextMax;
for (; ext_in < ext_in_end; ext_in++)
fdr_to_pst[ext_in->ifd].n_globals++;
/* Pass 1.5 over files: partition out global symbol space */
s_idx = 0;
for (f_idx = -1; f_idx < hdr->ifdMax; f_idx++)
{
fdr_to_pst[f_idx].globals_offset = s_idx;
s_idx += fdr_to_pst[f_idx].n_globals;
fdr_to_pst[f_idx].n_globals = 0;
}
1991-03-28 16:26:26 +00:00
/* Pass 2 over external syms: fill in external symbols */
ext_in = ext_block;
ext_in_end = ext_in + hdr->iextMax;
for (; ext_in < ext_in_end; ext_in++)
{
enum minimal_symbol_type ms_type = mst_text;
1991-03-28 16:26:26 +00:00
extern_tab[fdr_to_pst[ext_in->ifd].globals_offset
+ fdr_to_pst[ext_in->ifd].n_globals++] = *ext_in;
if (ext_in->asym.sc == scUndefined || ext_in->asym.sc == scNil)
continue;
name = ecoff_data (cur_bfd)->ssext + ext_in->asym.iss;
switch (ext_in->asym.st)
{
case stProc:
break;
case stGlobal:
ms_type = mst_data;
break;
case stLabel:
break;
default:
ms_type = mst_unknown;
complain (&unknown_ext_complaint, name);
1991-03-28 16:26:26 +00:00
}
prim_record_minimal_symbol (name, ext_in->asym.value, ms_type);
}
1991-03-28 16:26:26 +00:00
/* Pass 3 over files, over local syms: fill in static symbols */
for (f_idx = 0; f_idx < hdr->ifdMax; f_idx++)
{
struct partial_symtab *save_pst;
EXTR *ext_ptr;
cur_fdr = fh = ecoff_data (cur_bfd)->fdr + f_idx;
if (fh->csym == 0)
{
fdr_to_pst[f_idx].pst = NULL;
continue;
}
pst = start_psymtab_common (objfile, section_offsets,
fdr_name (fh),
fh->cpd ? fh->adr : 0,
objfile->global_psymbols.next,
objfile->static_psymbols.next);
pst->read_symtab_private = ((char *)
obstack_alloc (&objfile->psymbol_obstack,
sizeof (struct symloc)));
memset ((PTR) pst->read_symtab_private, 0, sizeof (struct symloc));
save_pst = pst;
/* Make everything point to everything. */
FDR_IDX (pst) = f_idx;
fdr_to_pst[f_idx].pst = pst;
/* FIXME: This tampers with data from BFD. */
fh->ioptBase = (int) pst;
CUR_BFD (pst) = cur_bfd;
/* The way to turn this into a symtab is to call... */
pst->read_symtab = mipscoff_psymtab_to_symtab;
pst->texthigh = pst->textlow;
/* For stabs-in-ecoff files, the second symbol must be @stab.
This symbol is emitted by mips-tfile to signal that the
current object file uses encapsulated stabs instead of mips
ecoff for local symbols. (It is the second symbol because
the first symbol is the stFile used to signal the start of a
file). */
processing_gcc_compilation = 0;
if (fh->csym >= 2)
{
ecoff_swap_sym_in (cur_bfd,
(ecoff_data (cur_bfd)->external_sym
+ fh->isymBase
+ 1),
&sh);
if (STREQ (ecoff_data (cur_bfd)->ss + fh->issBase + sh.iss,
stabs_symbol))
processing_gcc_compilation = 2;
}
if (processing_gcc_compilation != 0)
{
for (cur_sdx = 2; cur_sdx < fh->csym; cur_sdx++)
{
int type_code;
char *namestring;
ecoff_swap_sym_in (cur_bfd,
(ecoff_data (cur_bfd)->external_sym
+ fh->isymBase
+ cur_sdx),
&sh);
type_code = MIPS_UNMARK_STAB (sh.index);
if (!MIPS_IS_STAB (&sh))
{
if (sh.st == stProc || sh.st == stStaticProc)
{
long procaddr = sh.value;
long isym;
isym = AUX_GET_ISYM (fh->fBigendian,
(ecoff_data (cur_bfd)->external_aux
+ fh->iauxBase
+ sh.index));
ecoff_swap_sym_in (cur_bfd,
(ecoff_data (cur_bfd)->external_sym
+ fh->isymBase
+ isym
- 1),
&sh);
if (sh.st == stEnd)
{
long high = procaddr + sh.value;
if (high > pst->texthigh)
pst->texthigh = high;
}
}
continue;
}
#define SET_NAMESTRING() \
namestring = ecoff_data (cur_bfd)->ss + fh->issBase + sh.iss
#define CUR_SYMBOL_TYPE type_code
#define CUR_SYMBOL_VALUE sh.value
#define START_PSYMTAB(ofile,secoff,fname,low,symoff,global_syms,static_syms)\
pst = save_pst
#define END_PSYMTAB(pst,ilist,ninc,c_off,c_text,dep_list,n_deps) (void)0
#define HANDLE_RBRAC(val) \
if ((val) > save_pst->texthigh) save_pst->texthigh = (val);
#include "partial-stab.h"
}
}
else
{
for (cur_sdx = 0; cur_sdx < fh->csym;)
{
char *name;
enum address_class class;
ecoff_swap_sym_in (cur_bfd,
(ecoff_data (cur_bfd)->external_sym
+ fh->isymBase
+ cur_sdx),
&sh);
if (MIPS_IS_STAB (&sh))
{
cur_sdx++;
continue;
}
if (sh.sc == scUndefined || sh.sc == scNil ||
sh.index == 0xfffff)
{
/* FIXME, premature? */
cur_sdx++;
continue;
}
name = ecoff_data (cur_bfd)->ss + fh->issBase + sh.iss;
switch (sh.st)
{
long high;
long procaddr;
int new_sdx;
case stProc: /* Asm labels apparently */
case stStaticProc: /* Function */
ADD_PSYMBOL_TO_LIST (name, strlen (name),
VAR_NAMESPACE, LOC_BLOCK,
objfile->static_psymbols, sh.value,
psymtab_language, objfile);
/* Skip over procedure to next one. */
if (sh.index >= hdr->iauxMax)
{
/* Should not happen, but does when cross-compiling
with the MIPS compiler. FIXME -- pull later. */
complain (&index_complaint, name);
new_sdx = cur_sdx + 1; /* Don't skip at all */
}
else
new_sdx = AUX_GET_ISYM (fh->fBigendian,
(ecoff_data (cur_bfd)->external_aux
+ fh->iauxBase
+ sh.index));
procaddr = sh.value;
if (new_sdx <= cur_sdx)
{
/* This should not happen either... FIXME. */
complain (&aux_index_complaint, name);
new_sdx = cur_sdx + 1; /* Don't skip backward */
}
cur_sdx = new_sdx;
ecoff_swap_sym_in (cur_bfd,
(ecoff_data (cur_bfd)->external_sym
+ fh->isymBase
+ cur_sdx
- 1),
&sh);
if (sh.st != stEnd)
continue;
high = procaddr + sh.value;
if (high > pst->texthigh)
pst->texthigh = high;
continue;
case stStatic: /* Variable */
class = LOC_STATIC;
break;
case stTypedef:/* Typedef */
class = LOC_TYPEDEF;
break;
case stConstant: /* Constant decl */
class = LOC_CONST;
break;
case stUnion:
case stStruct:
case stEnum:
case stBlock: /* { }, str, un, enum*/
if (sh.sc == scInfo)
{
ADD_PSYMBOL_TO_LIST (name, strlen (name),
STRUCT_NAMESPACE, LOC_TYPEDEF,
objfile->static_psymbols,
sh.value,
psymtab_language, objfile);
}
/* Skip over the block */
new_sdx = sh.index;
if (new_sdx <= cur_sdx)
{
/* This happens with the Ultrix kernel. */
complain (&block_index_complaint, name);
new_sdx = cur_sdx + 1; /* Don't skip backward */
}
cur_sdx = new_sdx;
continue;
case stFile: /* File headers */
case stLabel: /* Labels */
case stEnd: /* Ends of files */
goto skip;
case stLocal: /* Local variables */
/* Normally these are skipped because we skip over
all blocks we see. However, these can occur
as visible symbols in a .h file that contains code. */
goto skip;
default:
/* Both complaints are valid: one gives symbol name,
the other the offending symbol type. */
complain (&unknown_sym_complaint, name);
complain (&unknown_st_complaint, sh.st);
cur_sdx++;
continue;
}
/* Use this gdb symbol */
ADD_PSYMBOL_TO_LIST (name, strlen (name),
VAR_NAMESPACE, class,
objfile->static_psymbols, sh.value,
psymtab_language, objfile);
skip:
cur_sdx++; /* Go to next file symbol */
}
/* Now do enter the external symbols. */
ext_ptr = &extern_tab[fdr_to_pst[f_idx].globals_offset];
cur_sdx = fdr_to_pst[f_idx].n_globals;
PST_PRIVATE (save_pst)->extern_count = cur_sdx;
PST_PRIVATE (save_pst)->extern_tab = ext_ptr;
for (; --cur_sdx >= 0; ext_ptr++)
{
register struct partial_symbol *psym;
enum address_class class;
SYMR *psh;
char *name;
if (ext_ptr->ifd != f_idx)
abort ();
psh = &ext_ptr->asym;
switch (psh->st)
{
case stProc:
class = LOC_BLOCK;
break;
case stLabel:
class = LOC_LABEL;
break;
default:
complain (&unknown_ext_complaint,
ecoff_data (cur_bfd)->ssext + psh->iss);
/* Fall through, pretend it's global. */
case stGlobal:
class = LOC_STATIC;
break;
}
name = ecoff_data (cur_bfd)->ssext + psh->iss;
ADD_PSYMBOL_ADDR_TO_LIST (name, strlen (name),
VAR_NAMESPACE, class,
objfile->global_psymbols, (CORE_ADDR) psh->value,
psymtab_language, objfile);
}
1991-03-28 16:26:26 +00:00
}
end_psymtab (save_pst, psymtab_include_list, includes_used,
-1, save_pst->texthigh,
dependency_list, dependencies_used);
if (objfile->ei.entry_point >= save_pst->textlow &&
objfile->ei.entry_point < save_pst->texthigh)
{
objfile->ei.entry_file_lowpc = save_pst->textlow;
objfile->ei.entry_file_highpc = save_pst->texthigh;
}
}
/* Now scan the FDRs for dependencies */
for (f_idx = 0; f_idx < hdr->ifdMax; f_idx++)
{
int s_id0 = 0;
fh = f_idx + ecoff_data (cur_bfd)->fdr;
pst = fdr_to_pst[f_idx].pst;
/* This should catch stabs-in-ecoff. */
if (fh->crfd <= 1)
continue;
if (fh->cpd == 0)
{ /* If there are no functions defined here ... */
/* ...then presumably a .h file: drop reverse depends .h->.c */
for (; s_id0 < fh->crfd; s_id0++)
{
RFDT rh;
ecoff_swap_rfd_in (cur_bfd,
(ecoff_data (cur_bfd)->external_rfd
+ fh->rfdBase
+ s_id0),
&rh);
if (rh == f_idx)
{
s_id0++; /* Skip self-dependency */
break;
}
}
}
pst->number_of_dependencies = fh->crfd - s_id0;
pst->dependencies =
((struct partial_symtab **)
obstack_alloc (&objfile->psymbol_obstack,
(pst->number_of_dependencies
* sizeof (struct partial_symtab *))));
for (s_idx = s_id0; s_idx < fh->crfd; s_idx++)
{
RFDT rh;
ecoff_swap_rfd_in (cur_bfd,
(ecoff_data (cur_bfd)->external_rfd
+ fh->rfdBase
+ s_idx),
&rh);
if (rh < 0 || rh >= hdr->ifdMax)
complain (&bad_file_number_complaint, rh);
else
pst->dependencies[s_idx - s_id0] = fdr_to_pst[rh].pst;
}
}
do_cleanups (old_chain);
1991-03-28 16:26:26 +00:00
}
#if 0
1991-03-28 16:26:26 +00:00
/* Do the initial analisys of the F_IDX-th file descriptor.
Allocates a partial symtab for it, and builds the list
of dependent files by recursion. LEV says at which level
of recursion we are called (to pretty up debug traces) */
static struct partial_symtab *
parse_fdr (f_idx, lev, objfile)
int f_idx;
int lev;
struct objfile *objfile;
1991-03-28 16:26:26 +00:00
{
register FDR *fh;
register struct partial_symtab *pst;
int s_idx, s_id0;
1991-03-28 16:26:26 +00:00
fh = ecoff_data (cur_bfd)->fdr + f_idx;
/* Use this to indicate into which symtab this file was parsed */
if (fh->ioptBase)
return (struct partial_symtab *) fh->ioptBase;
/* Debuggability level */
if (compare_glevel (max_glevel, fh->glevel) < 0)
max_glevel = fh->glevel;
/* Make a new partial_symtab */
pst = new_psymtab (fdr_name (fh), objfile);
if (fh->cpd == 0)
{
pst->textlow = 0;
pst->texthigh = 0;
}
else
{
pst->textlow = fh->adr;
pst->texthigh = fh->cpd; /* To be fixed later */
}
/* Make everything point to everything. */
FDR_IDX (pst) = f_idx;
fdr_to_pst[f_idx].pst = pst;
fh->ioptBase = (int) pst;
/* Analyze its dependencies */
if (fh->crfd <= 1)
return pst;
s_id0 = 0;
if (fh->cpd == 0)
{ /* If there are no functions defined here ... */
/* ...then presumably a .h file: drop reverse depends .h->.c */
for (; s_id0 < fh->crfd; s_id0++)
{
RFDT rh;
ecoff_swap_rfd_in (cur_bfd,
(ecoff_data (cur_bfd)->external_rfd
+ fh->rfdBase
+ s_id0),
&rh);
if (rh == f_idx)
{
s_id0++; /* Skip self-dependency */
break;
}
1991-03-28 16:26:26 +00:00
}
}
pst->number_of_dependencies = fh->crfd - s_id0;
pst->dependencies = ((struct partial_symtab **)
obstack_alloc (&objfile->psymbol_obstack,
(pst->number_of_dependencies
* sizeof (struct partial_symtab *))));
for (s_idx = s_id0; s_idx < fh->crfd; s_idx++)
{
RFDT rh;
ecoff_swap_rfd_in (cur_bfd,
(ecoff_data (cur_bfd)->external_rfd
+ fh->rfdBase
+ s_idx),
&rh);
pst->dependencies[s_idx - s_id0] = parse_fdr (rh, lev + 1, objfile);
}
1991-03-28 16:26:26 +00:00
return pst;
1991-03-28 16:26:26 +00:00
}
#endif
1991-03-28 16:26:26 +00:00
static char *
mips_next_symbol_text ()
{
SYMR sh;
cur_sdx++;
ecoff_swap_sym_in (cur_bfd,
(ecoff_data (cur_bfd)->external_sym
+ cur_fdr->isymBase
+ cur_sdx),
&sh);
return ecoff_data (cur_bfd)->ss + cur_fdr->issBase + sh.iss;
}
1991-03-28 16:26:26 +00:00
/* Ancillary function to psymtab_to_symtab(). Does all the work
for turning the partial symtab PST into a symtab, recurring
first on all dependent psymtabs. The argument FILENAME is
only passed so we can see in debug stack traces what file
is being read.
This function has a split personality, based on whether the
symbol table contains ordinary ecoff symbols, or stabs-in-ecoff.
The flow of control and even the memory allocation differs. FIXME. */
1991-03-28 16:26:26 +00:00
static void
psymtab_to_symtab_1 (pst, filename)
struct partial_symtab *pst;
char *filename;
1991-03-28 16:26:26 +00:00
{
int i;
struct symtab *st;
FDR *fh;
struct linetable *lines;
if (pst->readin)
return;
pst->readin = 1;
/* Read in all partial symbtabs on which this one is dependent.
NOTE that we do have circular dependencies, sigh. We solved
that by setting pst->readin before this point. */
for (i = 0; i < pst->number_of_dependencies; i++)
if (!pst->dependencies[i]->readin)
{
/* Inform about additional files to be read in. */
if (info_verbose)
{
fputs_filtered (" ", stdout);
wrap_here ("");
fputs_filtered ("and ", stdout);
wrap_here ("");
printf_filtered ("%s...",
pst->dependencies[i]->filename);
wrap_here (""); /* Flush output */
fflush (stdout);
}
/* We only pass the filename for debug purposes */
psymtab_to_symtab_1 (pst->dependencies[i],
pst->dependencies[i]->filename);
}
/* Now read the symbols for this symtab */
current_objfile = pst->objfile;
cur_fd = FDR_IDX (pst);
fh = (cur_fd == -1) ? (FDR *) NULL : ecoff_data (cur_bfd)->fdr + cur_fd;
cur_fdr = fh;
/* See comment in parse_partial_symbols about the @stabs sentinel. */
processing_gcc_compilation = 0;
if (fh != (FDR *) NULL && fh->csym >= 2)
{
SYMR sh;
ecoff_swap_sym_in (cur_bfd,
(ecoff_data (cur_bfd)->external_sym
+ fh->isymBase
+ 1),
&sh);
if (STREQ (ecoff_data (cur_bfd)->ss + fh->issBase + sh.iss,
stabs_symbol))
{
/* We indicate that this is a GCC compilation so that certain
features will be enabled in stabsread/dbxread. */
processing_gcc_compilation = 2;
}
}
if (processing_gcc_compilation != 0)
{
struct pdr_ext *pdr_ptr;
struct pdr_ext *pdr_end;
int first_pdr;
unsigned long first_off;
/* This symbol table contains stabs-in-ecoff entries. */
/* Parse local symbols first */
if (fh->csym <= 2) /* FIXME, this blows psymtab->symtab ptr */
{
current_objfile = NULL;
return;
}
for (cur_sdx = 2; cur_sdx < fh->csym; cur_sdx++)
{
SYMR sh;
char *name;
CORE_ADDR valu;
ecoff_swap_sym_in (cur_bfd,
(ecoff_data (cur_bfd)->external_sym
+ fh->isymBase
+ cur_sdx),
&sh);
name = ecoff_data (cur_bfd)->ss + fh->issBase + sh.iss;
valu = sh.value;
if (MIPS_IS_STAB (&sh))
{
int type_code = MIPS_UNMARK_STAB (sh.index);
process_one_symbol (type_code, 0, valu, name,
pst->section_offsets, pst->objfile);
if (type_code == N_FUN)
{
/* Make up special symbol to contain
procedure specific info */
struct mips_extra_func_info *e =
((struct mips_extra_func_info *)
obstack_alloc (&current_objfile->symbol_obstack,
sizeof (struct mips_extra_func_info)));
struct symbol *s = new_symbol (MIPS_EFI_SYMBOL_NAME);
SYMBOL_NAMESPACE (s) = LABEL_NAMESPACE;
SYMBOL_CLASS (s) = LOC_CONST;
SYMBOL_TYPE (s) = builtin_type_void;
SYMBOL_VALUE (s) = (int) e;
add_symbol_to_list (s, &local_symbols);
}
}
else if (sh.st == stLabel && sh.index != indexNil)
{
/* Handle encoded stab line number. */
record_line (current_subfile, sh.index, valu);
}
else if (sh.st == stProc || sh.st == stStaticProc || sh.st == stEnd)
/* These are generated by gcc-2.x, do not complain */
;
else
complain (&stab_unknown_complaint, name);
}
st = end_symtab (pst->texthigh, 0, 0, pst->objfile, SECT_OFF_TEXT);
end_stabs ();
/* Sort the symbol table now, we are done adding symbols to it.
We must do this before parse_procedure calls lookup_symbol. */
sort_symtab_syms (st);
/* This may not be necessary for stabs symtabs. FIXME. */
sort_blocks (st);
/* Fill in procedure info next. */
first_pdr = 1;
pdr_ptr = ecoff_data (cur_bfd)->external_pdr + fh->ipdFirst;
pdr_end = pdr_ptr + fh->cpd;
for (; pdr_ptr < pdr_end; pdr_ptr++)
{
PDR pr;
ecoff_swap_pdr_in (cur_bfd, pdr_ptr, &pr);
if (first_pdr)
{
first_off = pr.adr;
first_pdr = 0;
}
parse_procedure (&pr, 1, first_off);
}
}
else
{
/* This symbol table contains ordinary ecoff entries. */
/* FIXME: doesn't use pst->section_offsets. */
int f_max;
int maxlines;
EXTR *ext_ptr;
* gdbtypes.c (create_array_type): Complete rewrite. Now requires a optional type to decorate as an array type, the type of the index, and the bounds of the array. Records this additional info in the array type for use with languages with nonzero array bounds. * gdbtypes.h (enum type_code): Update comment for TYPE_CODE_ARRAY to note that arrays may have bounds. * gdbtypes.h (create_array_type): Update prototype. * c-exp.y (ptype production): Adjust for new create_array_type calling conventions. * coffread.c (decode_type): Call create_array_type rather than handcrafting array types. * convex-tdep.c (value_type): Remove, now use create_array_type. * convex-tdep.c (value_of_trapped_internalvar): Convert calls to vector_type into calls to create_array_type. * dwarfread.c (decode_subscr_data): Name changed to decode_subscript_data_item throughout. * dwarfread.c (decode_subscript_data_item): Rewrite to use create_array_type. Now records index type and range as well. * dwarfread.c (dwarf_read_array_type): Rewrite as part of change to use create_array_type. * dwarfread.c (read_subroutine_type): Test existing user defined types before decorating them, to ensure they are blank, and complain about it if they are not. * dwarfread.c (decode_fund_type): For unrecognized types, always return some valid type (type integer). If the unrecognized type cannot be an implementation defined type, complain as well. * m88k-tdep.c (pushed_size): Update comment for TYPE_CODE_ARRAY. * m88k-tdep.c (store_param): Update comment for TYPE_CODE_ARRAY. * mipsread.c (upgrade_type): Add FIXME comment that code to handcraft arrays should be replaced with call to create_array_type. * stabsread.c (read_array_type): Replace code to handcraft array types with call to create_array_type. * valprint.c (type_print_varspec_prefix): Minor formatting change, join lines that don't need to be split.
1992-12-15 02:52:11 +00:00
/* How many symbols will we need */
/* FIXME, this does not count enum values. */
f_max = pst->n_global_syms + pst->n_static_syms;
if (fh == 0)
{
maxlines = 0;
st = new_symtab ("unknown", f_max, 0, pst->objfile);
}
else
{
f_max += fh->csym + fh->cpd;
maxlines = 2 * fh->cline;
st = new_symtab (pst->filename, 2 * f_max, maxlines, pst->objfile);
}
lines = LINETABLE (st);
pending_list = PST_PRIVATE (pst)->pending_list;
if (pending_list == 0)
{
pending_list = ((struct mips_pending **)
xzalloc (ecoff_data (cur_bfd)->symbolic_header.ifdMax
* sizeof (struct mips_pending *)));
PST_PRIVATE (pst)->pending_list = pending_list;
}
/* Get a new lexical context */
push_parse_stack ();
top_stack->cur_st = st;
top_stack->cur_block = BLOCKVECTOR_BLOCK (BLOCKVECTOR (st),
STATIC_BLOCK);
BLOCK_START (top_stack->cur_block) = fh ? fh->adr : 0;
BLOCK_END (top_stack->cur_block) = 0;
top_stack->blocktype = stFile;
top_stack->maxsyms = 2 * f_max;
top_stack->cur_type = 0;
top_stack->procadr = 0;
top_stack->numargs = 0;
if (fh)
{
struct sym_ext *sym_ptr;
struct sym_ext *sym_end;
/* Parse local symbols first */
sym_ptr = ecoff_data (cur_bfd)->external_sym + fh->isymBase;
sym_end = sym_ptr + fh->csym;
while (sym_ptr < sym_end)
{
SYMR sh;
int c;
ecoff_swap_sym_in (cur_bfd, sym_ptr, &sh);
c = parse_symbol (&sh,
(ecoff_data (cur_bfd)->external_aux
+ fh->iauxBase),
sym_ptr, fh->fBigendian);
/* FIXME: We must swap the modified symbol back out,
although we would rather not. See parse_symbol. */
ecoff_swap_sym_out (cur_bfd, &sh, sym_ptr);
sym_ptr += c;
}
1991-03-28 16:26:26 +00:00
/* Linenumbers. At the end, check if we can save memory.
parse_lines has to look ahead an arbitrary number of PDR
structures, so we swap them all first. */
if (fh->cpd > 0)
{
PDR *pr_block;
struct cleanup *old_chain;
struct pdr_ext *pdr_ptr;
struct pdr_ext *pdr_end;
PDR *pdr_in;
PDR *pdr_in_end;
pr_block = (PDR *) xmalloc (fh->cpd * sizeof (PDR));
old_chain = make_cleanup (free, pr_block);
pdr_ptr = ecoff_data (cur_bfd)->external_pdr + fh->ipdFirst;
pdr_end = pdr_ptr + fh->cpd;
pdr_in = pr_block;
for (; pdr_ptr < pdr_end; pdr_ptr++, pdr_in++)
ecoff_swap_pdr_in (cur_bfd, pdr_ptr, pdr_in);
parse_lines (fh, pr_block, lines);
if (lines->nitems < fh->cline)
lines = shrink_linetable (lines);
/* Fill in procedure info next. */
pdr_in = pr_block;
pdr_in_end = pdr_in + fh->cpd;
for (; pdr_in < pdr_in_end; pdr_in++)
parse_procedure (pdr_in, 0, pr_block->adr);
do_cleanups (old_chain);
}
}
LINETABLE (st) = lines;
/* .. and our share of externals.
XXX use the global list to speed up things here. how?
FIXME, Maybe quit once we have found the right number of ext's? */
top_stack->cur_st = st;
top_stack->cur_block = BLOCKVECTOR_BLOCK (BLOCKVECTOR (top_stack->cur_st),
GLOBAL_BLOCK);
top_stack->blocktype = stFile;
top_stack->maxsyms = (ecoff_data (cur_bfd)->symbolic_header.isymMax
+ ecoff_data (cur_bfd)->symbolic_header.ipdMax
+ ecoff_data (cur_bfd)->symbolic_header.iextMax);
ext_ptr = PST_PRIVATE (pst)->extern_tab;
for (i = PST_PRIVATE (pst)->extern_count; --i >= 0; ext_ptr++)
parse_external (ext_ptr, 1, fh->fBigendian);
/* If there are undefined, tell the user */
if (n_undef_symbols)
{
printf_filtered ("File %s contains %d unresolved references:",
st->filename, n_undef_symbols);
printf_filtered ("\n\t%4d variables\n\t%4d procedures\n\t%4d labels\n",
n_undef_vars, n_undef_procs, n_undef_labels);
n_undef_symbols = n_undef_labels = n_undef_vars = n_undef_procs = 0;
1991-03-28 16:26:26 +00:00
}
pop_parse_stack ();
/* Sort the symbol table now, we are done adding symbols to it.*/
sort_symtab_syms (st);
sort_blocks (st);
}
/* Now link the psymtab and the symtab. */
pst->symtab = st;
current_objfile = NULL;
}
1991-03-28 16:26:26 +00:00
/* Ancillary parsing procedures. */
/* Lookup the type at relative index RN. Return it in TPP
if found and in any event come up with its name PNAME.
BIGEND says whether aux symbols are big-endian or not (from fh->fBigendian).
Return value says how many aux symbols we ate. */
1991-03-28 16:26:26 +00:00
static int
cross_ref (ax, tpp, type_code, pname, bigend)
union aux_ext *ax;
struct type **tpp;
enum type_code type_code; /* Use to alloc new type if none is found. */
char **pname;
int bigend;
1991-03-28 16:26:26 +00:00
{
RNDXR rn[1];
unsigned rf;
int result = 1;
1991-03-28 16:26:26 +00:00
ecoff_swap_rndx_in (bigend, &ax->a_rndx, rn);
/* Escape index means 'the next one' */
if (rn->rfd == 0xfff)
{
result++;
rf = AUX_GET_ISYM (bigend, ax + 1);
}
else
{
rf = rn->rfd;
}
if (rf == -1)
{
/* Ooops */
*pname = "<undefined>";
}
else
{
/*
* Find the relative file descriptor and the symbol in it
*/
FDR *fh = get_rfd (cur_fd, rf);
struct sym_ext *esh;
SYMR sh;
struct type *t;
/* If we have processed this symbol then we left a forwarding
pointer to the corresponding GDB symbol. If not, we`ll put
it in a list of pending symbols, to be processed later when
the file will be. In any event, we collect the name for the
type here. Which is why we made a first pass at strings. */
esh = ecoff_data (cur_bfd)->external_sym + fh->isymBase + rn->index;
ecoff_swap_sym_in (cur_bfd, esh, &sh);
/* Careful, we might be looking at .o files */
if (sh.iss == 0)
*pname = "<undefined>";
else
*pname = ecoff_data (cur_bfd)->ss + fh->issBase + sh.iss;
/* Have we parsed it ? */
if (sh.value != 0 && sh.st == stParsed)
{
t = (struct type *) sh.value;
*tpp = t;
1991-03-28 16:26:26 +00:00
}
else
{
/* Avoid duplicates */
struct mips_pending *p = is_pending_symbol (fh, esh);
if (p)
*tpp = p->t;
else
{
*tpp = init_type (type_code, 0, 0, (char *) NULL,
(struct objfile *) NULL);
add_pending (fh, esh, *tpp);
}
}
}
/* We used one auxent normally, two if we got a "next one" rf. */
return result;
1991-03-28 16:26:26 +00:00
}
/* Quick&dirty lookup procedure, to avoid the MI ones that require
keeping the symtab sorted */
static struct symbol *
mylookup_symbol (name, block, namespace, class)
char *name;
register struct block *block;
enum namespace namespace;
enum address_class class;
{
register int bot, top, inc;
register struct symbol *sym;
bot = 0;
top = BLOCK_NSYMS (block);
inc = name[0];
while (bot < top)
{
sym = BLOCK_SYM (block, bot);
if (SYMBOL_NAME (sym)[0] == inc
&& SYMBOL_NAMESPACE (sym) == namespace
&& SYMBOL_CLASS (sym) == class
&& STREQ (SYMBOL_NAME (sym), name))
return sym;
bot++;
}
block = BLOCK_SUPERBLOCK (block);
if (block)
return mylookup_symbol (name, block, namespace, class);
return 0;
1991-03-28 16:26:26 +00:00
}
/* Add a new symbol S to a block B.
Infrequently, we will need to reallocate the block to make it bigger.
We only detect this case when adding to top_stack->cur_block, since
that's the only time we know how big the block is. FIXME. */
1991-03-28 16:26:26 +00:00
static void
add_symbol (s, b)
struct symbol *s;
struct block *b;
1991-03-28 16:26:26 +00:00
{
int nsyms = BLOCK_NSYMS (b)++;
struct block *origb;
struct parse_stack *stackp;
if (b == top_stack->cur_block &&
nsyms >= top_stack->maxsyms)
{
complain (&block_overflow_complaint, SYMBOL_NAME (s));
/* In this case shrink_block is actually grow_block, since
BLOCK_NSYMS(b) is larger than its current size. */
origb = b;
b = shrink_block (top_stack->cur_block, top_stack->cur_st);
/* Now run through the stack replacing pointers to the
original block. shrink_block has already done this
for the blockvector and BLOCK_FUNCTION. */
for (stackp = top_stack; stackp; stackp = stackp->next)
{
if (stackp->cur_block == origb)
{
stackp->cur_block = b;
stackp->maxsyms = BLOCK_NSYMS (b);
}
}
}
BLOCK_SYM (b, nsyms) = s;
1991-03-28 16:26:26 +00:00
}
/* Add a new block B to a symtab S */
static void
add_block (b, s)
struct block *b;
struct symtab *s;
1991-03-28 16:26:26 +00:00
{
struct blockvector *bv = BLOCKVECTOR (s);
1991-03-28 16:26:26 +00:00
bv = (struct blockvector *) xrealloc ((PTR) bv,
(sizeof (struct blockvector)
+ BLOCKVECTOR_NBLOCKS (bv)
* sizeof (bv->block)));
if (bv != BLOCKVECTOR (s))
BLOCKVECTOR (s) = bv;
1991-03-28 16:26:26 +00:00
BLOCKVECTOR_BLOCK (bv, BLOCKVECTOR_NBLOCKS (bv)++) = b;
1991-03-28 16:26:26 +00:00
}
/* Add a new linenumber entry (LINENO,ADR) to a linevector LT.
MIPS' linenumber encoding might need more than one byte
to describe it, LAST is used to detect these continuation lines.
Combining lines with the same line number seems like a bad idea.
E.g: There could be a line number entry with the same line number after the
prologue and GDB should not ignore it (this is a better way to find
a prologue than mips_skip_prologue).
But due to the compressed line table format there are line number entries
for the same line which are needed to bridge the gap to the next
line number entry. These entries have a bogus address info with them
and we are unable to tell them from intended duplicate line number
entries.
This is another reason why -ggdb debugging format is preferable. */
1991-03-28 16:26:26 +00:00
static int
add_line (lt, lineno, adr, last)
struct linetable *lt;
int lineno;
CORE_ADDR adr;
int last;
1991-03-28 16:26:26 +00:00
{
if (last == 0)
last = -2; /* make sure we record first line */
1991-03-28 16:26:26 +00:00
if (last == lineno) /* skip continuation lines */
return lineno;
1991-03-28 16:26:26 +00:00
lt->item[lt->nitems].line = lineno;
lt->item[lt->nitems++].pc = adr << 2;
return lineno;
1991-03-28 16:26:26 +00:00
}
Create and use macros for iterating on symtabs, psymtabs, msymbols. * minsyms.c (iterate_over_msymbols): Remove; clunky and slow. * symfile.h, symtab.h (iterate_over_msymbols): Remove prototype * coffread.c (coff_symfile_read): iterate_over_symtabs => ALL_SYMTABS. (patch_opaque_types): Avoid dummy args and result. * objfiles.c (have_partial_symbols, have_full_symbols, have_minimal_symbols): explicit iteration => ALL_OBJFILES; simplify. (iterate_over_objfiles, iterate_over_symtabs, iterate_over_psymtabs): Remove, clunky and slow. * objfiles.h: Replace iterate_over_* prototypes with ALL_SYMTABS, ALL_PSYMTABS, and ALL_MSYMBOLS macros. * symmisc.c (dump_symtab, dump_psymtab, dump_msymbols, dump_objfile): Remove dummy args and results. Move filename comparisons to callers. (printsyms_command, printpsyms_command, printmsyms_command, printobjfiles_command): iterate_over_* => ALL_*. Compare filenames. * symtab.c (lookup_symtab_1, lookup_symtab, lookup_partial_symtab, lookup_symbol, find_main_psymtab, find_pc_symtab, sources_info, list_symbols, make_symbol_completion_list): Replace explicit iteration with ALL_SYMTABS, ALL_PSYMTABS, or ALL_MSYMBOLS. Eliminate Dijkstra flag crap, break out of loops with gotos. (lookup_symtab_1): Protect '/' tests from short filenames. (cplus_mangled_symbol): Move inline into lookup_symbol. * xcoffexec.c (relocate_objfile_msymbols): Remove poor hack. (relocate_minimal_symbol): Move inline to vmap_symtab. (vmap_symtab): Replace iteration with ALL_OBJFILES, iterate_over_msymbols with ALL_MSYMBOLS. Misc cleanup prior to release. * dwarfread.c (dwarf_build_psymtabs): Remove mainline test. * mipsread.c (compare_symtabs, compare_psymtabs): Remove, unused. * mipsread.c: Add prototypes for all static functions. * symmisc.c (dump_symtab_lines, dump_symtabs, dump_last_symtab, dump_blockvector, dump_block, dump_addrchass, dump_namespace, dump_symbol, dump_type, dump_linetable, dump_strtbl): Remove, unused. * xcoffread.c (dump_symtab_lines, dump_symtabs, dump_last_symtab, dump_blockvector, dump_block, dump_addrchass, dump_namespace, dump_symbol, dump_type, dump_linetable, dump_strtbl): Remove 2nd unused copy! * buildsym.c (define_symbol): Handle global register variables (from Pierre Willard). Complain if register numbers are too large.
1992-03-29 23:17:36 +00:00
/* Sorting and reordering procedures */
1991-03-28 16:26:26 +00:00
/* Blocks with a smaller low bound should come first */
Create and use macros for iterating on symtabs, psymtabs, msymbols. * minsyms.c (iterate_over_msymbols): Remove; clunky and slow. * symfile.h, symtab.h (iterate_over_msymbols): Remove prototype * coffread.c (coff_symfile_read): iterate_over_symtabs => ALL_SYMTABS. (patch_opaque_types): Avoid dummy args and result. * objfiles.c (have_partial_symbols, have_full_symbols, have_minimal_symbols): explicit iteration => ALL_OBJFILES; simplify. (iterate_over_objfiles, iterate_over_symtabs, iterate_over_psymtabs): Remove, clunky and slow. * objfiles.h: Replace iterate_over_* prototypes with ALL_SYMTABS, ALL_PSYMTABS, and ALL_MSYMBOLS macros. * symmisc.c (dump_symtab, dump_psymtab, dump_msymbols, dump_objfile): Remove dummy args and results. Move filename comparisons to callers. (printsyms_command, printpsyms_command, printmsyms_command, printobjfiles_command): iterate_over_* => ALL_*. Compare filenames. * symtab.c (lookup_symtab_1, lookup_symtab, lookup_partial_symtab, lookup_symbol, find_main_psymtab, find_pc_symtab, sources_info, list_symbols, make_symbol_completion_list): Replace explicit iteration with ALL_SYMTABS, ALL_PSYMTABS, or ALL_MSYMBOLS. Eliminate Dijkstra flag crap, break out of loops with gotos. (lookup_symtab_1): Protect '/' tests from short filenames. (cplus_mangled_symbol): Move inline into lookup_symbol. * xcoffexec.c (relocate_objfile_msymbols): Remove poor hack. (relocate_minimal_symbol): Move inline to vmap_symtab. (vmap_symtab): Replace iteration with ALL_OBJFILES, iterate_over_msymbols with ALL_MSYMBOLS. Misc cleanup prior to release. * dwarfread.c (dwarf_build_psymtabs): Remove mainline test. * mipsread.c (compare_symtabs, compare_psymtabs): Remove, unused. * mipsread.c: Add prototypes for all static functions. * symmisc.c (dump_symtab_lines, dump_symtabs, dump_last_symtab, dump_blockvector, dump_block, dump_addrchass, dump_namespace, dump_symbol, dump_type, dump_linetable, dump_strtbl): Remove, unused. * xcoffread.c (dump_symtab_lines, dump_symtabs, dump_last_symtab, dump_blockvector, dump_block, dump_addrchass, dump_namespace, dump_symbol, dump_type, dump_linetable, dump_strtbl): Remove 2nd unused copy! * buildsym.c (define_symbol): Handle global register variables (from Pierre Willard). Complain if register numbers are too large.
1992-03-29 23:17:36 +00:00
static int
compare_blocks (arg1, arg2)
const void *arg1, *arg2;
1991-03-28 16:26:26 +00:00
{
register int addr_diff;
struct block **b1 = (struct block **) arg1;
struct block **b2 = (struct block **) arg2;
addr_diff = (BLOCK_START ((*b1))) - (BLOCK_START ((*b2)));
if (addr_diff == 0)
return (BLOCK_END ((*b2))) - (BLOCK_END ((*b1)));
return addr_diff;
1991-03-28 16:26:26 +00:00
}
/* Sort the blocks of a symtab S.
Reorder the blocks in the blockvector by code-address,
as required by some MI search routines */
static void
sort_blocks (s)
struct symtab *s;
1991-03-28 16:26:26 +00:00
{
struct blockvector *bv = BLOCKVECTOR (s);
1991-03-28 16:26:26 +00:00
if (BLOCKVECTOR_NBLOCKS (bv) <= 2)
{
/* Cosmetic */
if (BLOCK_END (BLOCKVECTOR_BLOCK (bv, GLOBAL_BLOCK)) == 0)
BLOCK_START (BLOCKVECTOR_BLOCK (bv, GLOBAL_BLOCK)) = 0;
if (BLOCK_END (BLOCKVECTOR_BLOCK (bv, STATIC_BLOCK)) == 0)
BLOCK_START (BLOCKVECTOR_BLOCK (bv, STATIC_BLOCK)) = 0;
return;
}
/*
* This is very unfortunate: normally all functions are compiled in
* the order they are found, but if the file is compiled -O3 things
* are very different. It would be nice to find a reliable test
* to detect -O3 images in advance.
*/
if (BLOCKVECTOR_NBLOCKS (bv) > 3)
qsort (&BLOCKVECTOR_BLOCK (bv, FIRST_LOCAL_BLOCK),
BLOCKVECTOR_NBLOCKS (bv) - FIRST_LOCAL_BLOCK,
sizeof (struct block *),
compare_blocks);
{
register CORE_ADDR high = 0;
register int i, j = BLOCKVECTOR_NBLOCKS (bv);
for (i = FIRST_LOCAL_BLOCK; i < j; i++)
if (high < BLOCK_END (BLOCKVECTOR_BLOCK (bv, i)))
high = BLOCK_END (BLOCKVECTOR_BLOCK (bv, i));
BLOCK_END (BLOCKVECTOR_BLOCK (bv, GLOBAL_BLOCK)) = high;
}
BLOCK_START (BLOCKVECTOR_BLOCK (bv, GLOBAL_BLOCK)) =
BLOCK_START (BLOCKVECTOR_BLOCK (bv, FIRST_LOCAL_BLOCK));
BLOCK_START (BLOCKVECTOR_BLOCK (bv, STATIC_BLOCK)) =
BLOCK_START (BLOCKVECTOR_BLOCK (bv, GLOBAL_BLOCK));
BLOCK_END (BLOCKVECTOR_BLOCK (bv, STATIC_BLOCK)) =
BLOCK_END (BLOCKVECTOR_BLOCK (bv, GLOBAL_BLOCK));
1991-03-28 16:26:26 +00:00
}
1991-03-28 16:26:26 +00:00
/* Constructor/restructor/destructor procedures */
/* Allocate a new symtab for NAME. Needs an estimate of how many symbols
MAXSYMS and linenumbers MAXLINES we'll put in it */
static struct symtab *
new_symtab (name, maxsyms, maxlines, objfile)
char *name;
int maxsyms;
int maxlines;
struct objfile *objfile;
1991-03-28 16:26:26 +00:00
{
struct symtab *s = allocate_symtab (name, objfile);
1991-03-28 16:26:26 +00:00
LINETABLE (s) = new_linetable (maxlines);
1991-03-28 16:26:26 +00:00
/* All symtabs must have at least two blocks */
BLOCKVECTOR (s) = new_bvect (2);
BLOCKVECTOR_BLOCK (BLOCKVECTOR (s), GLOBAL_BLOCK) = new_block (maxsyms);
BLOCKVECTOR_BLOCK (BLOCKVECTOR (s), STATIC_BLOCK) = new_block (maxsyms);
BLOCK_SUPERBLOCK (BLOCKVECTOR_BLOCK (BLOCKVECTOR (s), STATIC_BLOCK)) =
BLOCKVECTOR_BLOCK (BLOCKVECTOR (s), GLOBAL_BLOCK);
1991-03-28 16:26:26 +00:00
s->free_code = free_linetable;
1991-03-28 16:26:26 +00:00
return (s);
1991-03-28 16:26:26 +00:00
}
/* Allocate a new partial_symtab NAME */
static struct partial_symtab *
new_psymtab (name, objfile)
char *name;
struct objfile *objfile;
1991-03-28 16:26:26 +00:00
{
struct partial_symtab *psymtab;
psymtab = allocate_psymtab (name, objfile);
/* Keep a backpointer to the file's symbols */
1991-03-28 16:26:26 +00:00
psymtab->read_symtab_private = ((char *)
obstack_alloc (&objfile->psymbol_obstack,
sizeof (struct symloc)));
memset ((PTR) psymtab->read_symtab_private, 0, sizeof (struct symloc));
CUR_BFD (psymtab) = cur_bfd;
/* The way to turn this into a symtab is to call... */
psymtab->read_symtab = mipscoff_psymtab_to_symtab;
return (psymtab);
1991-03-28 16:26:26 +00:00
}
Create and use macros for iterating on symtabs, psymtabs, msymbols. * minsyms.c (iterate_over_msymbols): Remove; clunky and slow. * symfile.h, symtab.h (iterate_over_msymbols): Remove prototype * coffread.c (coff_symfile_read): iterate_over_symtabs => ALL_SYMTABS. (patch_opaque_types): Avoid dummy args and result. * objfiles.c (have_partial_symbols, have_full_symbols, have_minimal_symbols): explicit iteration => ALL_OBJFILES; simplify. (iterate_over_objfiles, iterate_over_symtabs, iterate_over_psymtabs): Remove, clunky and slow. * objfiles.h: Replace iterate_over_* prototypes with ALL_SYMTABS, ALL_PSYMTABS, and ALL_MSYMBOLS macros. * symmisc.c (dump_symtab, dump_psymtab, dump_msymbols, dump_objfile): Remove dummy args and results. Move filename comparisons to callers. (printsyms_command, printpsyms_command, printmsyms_command, printobjfiles_command): iterate_over_* => ALL_*. Compare filenames. * symtab.c (lookup_symtab_1, lookup_symtab, lookup_partial_symtab, lookup_symbol, find_main_psymtab, find_pc_symtab, sources_info, list_symbols, make_symbol_completion_list): Replace explicit iteration with ALL_SYMTABS, ALL_PSYMTABS, or ALL_MSYMBOLS. Eliminate Dijkstra flag crap, break out of loops with gotos. (lookup_symtab_1): Protect '/' tests from short filenames. (cplus_mangled_symbol): Move inline into lookup_symbol. * xcoffexec.c (relocate_objfile_msymbols): Remove poor hack. (relocate_minimal_symbol): Move inline to vmap_symtab. (vmap_symtab): Replace iteration with ALL_OBJFILES, iterate_over_msymbols with ALL_MSYMBOLS. Misc cleanup prior to release. * dwarfread.c (dwarf_build_psymtabs): Remove mainline test. * mipsread.c (compare_symtabs, compare_psymtabs): Remove, unused. * mipsread.c: Add prototypes for all static functions. * symmisc.c (dump_symtab_lines, dump_symtabs, dump_last_symtab, dump_blockvector, dump_block, dump_addrchass, dump_namespace, dump_symbol, dump_type, dump_linetable, dump_strtbl): Remove, unused. * xcoffread.c (dump_symtab_lines, dump_symtabs, dump_last_symtab, dump_blockvector, dump_block, dump_addrchass, dump_namespace, dump_symbol, dump_type, dump_linetable, dump_strtbl): Remove 2nd unused copy! * buildsym.c (define_symbol): Handle global register variables (from Pierre Willard). Complain if register numbers are too large.
1992-03-29 23:17:36 +00:00
/* Allocate a linetable array of the given SIZE. Since the struct
already includes one item, we subtract one when calculating the
Create and use macros for iterating on symtabs, psymtabs, msymbols. * minsyms.c (iterate_over_msymbols): Remove; clunky and slow. * symfile.h, symtab.h (iterate_over_msymbols): Remove prototype * coffread.c (coff_symfile_read): iterate_over_symtabs => ALL_SYMTABS. (patch_opaque_types): Avoid dummy args and result. * objfiles.c (have_partial_symbols, have_full_symbols, have_minimal_symbols): explicit iteration => ALL_OBJFILES; simplify. (iterate_over_objfiles, iterate_over_symtabs, iterate_over_psymtabs): Remove, clunky and slow. * objfiles.h: Replace iterate_over_* prototypes with ALL_SYMTABS, ALL_PSYMTABS, and ALL_MSYMBOLS macros. * symmisc.c (dump_symtab, dump_psymtab, dump_msymbols, dump_objfile): Remove dummy args and results. Move filename comparisons to callers. (printsyms_command, printpsyms_command, printmsyms_command, printobjfiles_command): iterate_over_* => ALL_*. Compare filenames. * symtab.c (lookup_symtab_1, lookup_symtab, lookup_partial_symtab, lookup_symbol, find_main_psymtab, find_pc_symtab, sources_info, list_symbols, make_symbol_completion_list): Replace explicit iteration with ALL_SYMTABS, ALL_PSYMTABS, or ALL_MSYMBOLS. Eliminate Dijkstra flag crap, break out of loops with gotos. (lookup_symtab_1): Protect '/' tests from short filenames. (cplus_mangled_symbol): Move inline into lookup_symbol. * xcoffexec.c (relocate_objfile_msymbols): Remove poor hack. (relocate_minimal_symbol): Move inline to vmap_symtab. (vmap_symtab): Replace iteration with ALL_OBJFILES, iterate_over_msymbols with ALL_MSYMBOLS. Misc cleanup prior to release. * dwarfread.c (dwarf_build_psymtabs): Remove mainline test. * mipsread.c (compare_symtabs, compare_psymtabs): Remove, unused. * mipsread.c: Add prototypes for all static functions. * symmisc.c (dump_symtab_lines, dump_symtabs, dump_last_symtab, dump_blockvector, dump_block, dump_addrchass, dump_namespace, dump_symbol, dump_type, dump_linetable, dump_strtbl): Remove, unused. * xcoffread.c (dump_symtab_lines, dump_symtabs, dump_last_symtab, dump_blockvector, dump_block, dump_addrchass, dump_namespace, dump_symbol, dump_type, dump_linetable, dump_strtbl): Remove 2nd unused copy! * buildsym.c (define_symbol): Handle global register variables (from Pierre Willard). Complain if register numbers are too large.
1992-03-29 23:17:36 +00:00
proper size to allocate. */
1991-03-28 16:26:26 +00:00
static struct linetable *
new_linetable (size)
int size;
1991-03-28 16:26:26 +00:00
{
struct linetable *l;
1991-03-28 16:26:26 +00:00
size = (size - 1) * sizeof (l->item) + sizeof (struct linetable);
l = (struct linetable *) xmalloc (size);
l->nitems = 0;
return l;
1991-03-28 16:26:26 +00:00
}
/* Oops, too big. Shrink it. This was important with the 2.4 linetables,
Create and use macros for iterating on symtabs, psymtabs, msymbols. * minsyms.c (iterate_over_msymbols): Remove; clunky and slow. * symfile.h, symtab.h (iterate_over_msymbols): Remove prototype * coffread.c (coff_symfile_read): iterate_over_symtabs => ALL_SYMTABS. (patch_opaque_types): Avoid dummy args and result. * objfiles.c (have_partial_symbols, have_full_symbols, have_minimal_symbols): explicit iteration => ALL_OBJFILES; simplify. (iterate_over_objfiles, iterate_over_symtabs, iterate_over_psymtabs): Remove, clunky and slow. * objfiles.h: Replace iterate_over_* prototypes with ALL_SYMTABS, ALL_PSYMTABS, and ALL_MSYMBOLS macros. * symmisc.c (dump_symtab, dump_psymtab, dump_msymbols, dump_objfile): Remove dummy args and results. Move filename comparisons to callers. (printsyms_command, printpsyms_command, printmsyms_command, printobjfiles_command): iterate_over_* => ALL_*. Compare filenames. * symtab.c (lookup_symtab_1, lookup_symtab, lookup_partial_symtab, lookup_symbol, find_main_psymtab, find_pc_symtab, sources_info, list_symbols, make_symbol_completion_list): Replace explicit iteration with ALL_SYMTABS, ALL_PSYMTABS, or ALL_MSYMBOLS. Eliminate Dijkstra flag crap, break out of loops with gotos. (lookup_symtab_1): Protect '/' tests from short filenames. (cplus_mangled_symbol): Move inline into lookup_symbol. * xcoffexec.c (relocate_objfile_msymbols): Remove poor hack. (relocate_minimal_symbol): Move inline to vmap_symtab. (vmap_symtab): Replace iteration with ALL_OBJFILES, iterate_over_msymbols with ALL_MSYMBOLS. Misc cleanup prior to release. * dwarfread.c (dwarf_build_psymtabs): Remove mainline test. * mipsread.c (compare_symtabs, compare_psymtabs): Remove, unused. * mipsread.c: Add prototypes for all static functions. * symmisc.c (dump_symtab_lines, dump_symtabs, dump_last_symtab, dump_blockvector, dump_block, dump_addrchass, dump_namespace, dump_symbol, dump_type, dump_linetable, dump_strtbl): Remove, unused. * xcoffread.c (dump_symtab_lines, dump_symtabs, dump_last_symtab, dump_blockvector, dump_block, dump_addrchass, dump_namespace, dump_symbol, dump_type, dump_linetable, dump_strtbl): Remove 2nd unused copy! * buildsym.c (define_symbol): Handle global register variables (from Pierre Willard). Complain if register numbers are too large.
1992-03-29 23:17:36 +00:00
I am not so sure about the 3.4 ones.
Since the struct linetable already includes one item, we subtract one when
calculating the proper size to allocate. */
1991-03-28 16:26:26 +00:00
static struct linetable *
shrink_linetable (lt)
struct linetable *lt;
1991-03-28 16:26:26 +00:00
{
return (struct linetable *) xrealloc ((PTR) lt,
(sizeof (struct linetable)
+ ((lt->nitems - 1)
* sizeof (lt->item))));
1991-03-28 16:26:26 +00:00
}
/* Allocate and zero a new blockvector of NBLOCKS blocks. */
static struct blockvector *
new_bvect (nblocks)
int nblocks;
1991-03-28 16:26:26 +00:00
{
struct blockvector *bv;
int size;
1991-03-28 16:26:26 +00:00
size = sizeof (struct blockvector) + nblocks * sizeof (struct block *);
bv = (struct blockvector *) xzalloc (size);
1991-03-28 16:26:26 +00:00
BLOCKVECTOR_NBLOCKS (bv) = nblocks;
1991-03-28 16:26:26 +00:00
return bv;
1991-03-28 16:26:26 +00:00
}
/* Allocate and zero a new block of MAXSYMS symbols */
static struct block *
new_block (maxsyms)
int maxsyms;
1991-03-28 16:26:26 +00:00
{
int size = sizeof (struct block) + (maxsyms - 1) * sizeof (struct symbol *);
1991-03-28 16:26:26 +00:00
return (struct block *) xzalloc (size);
1991-03-28 16:26:26 +00:00
}
/* Ooops, too big. Shrink block B in symtab S to its minimal size.
Shrink_block can also be used by add_symbol to grow a block. */
1991-03-28 16:26:26 +00:00
static struct block *
shrink_block (b, s)
struct block *b;
struct symtab *s;
1991-03-28 16:26:26 +00:00
{
struct block *new;
struct blockvector *bv = BLOCKVECTOR (s);
int i;
1991-03-28 16:26:26 +00:00
/* Just reallocate it and fix references to the old one */
1991-03-28 16:26:26 +00:00
new = (struct block *) xrealloc ((PTR) b,
(sizeof (struct block)
+ ((BLOCK_NSYMS (b) - 1)
* sizeof (struct symbol *))));
1991-03-28 16:26:26 +00:00
/* Should chase pointers to old one. Fortunately, that`s just
1991-03-28 16:26:26 +00:00
the block`s function and inferior blocks */
if (BLOCK_FUNCTION (new) && SYMBOL_BLOCK_VALUE (BLOCK_FUNCTION (new)) == b)
SYMBOL_BLOCK_VALUE (BLOCK_FUNCTION (new)) = new;
for (i = 0; i < BLOCKVECTOR_NBLOCKS (bv); i++)
if (BLOCKVECTOR_BLOCK (bv, i) == b)
BLOCKVECTOR_BLOCK (bv, i) = new;
else if (BLOCK_SUPERBLOCK (BLOCKVECTOR_BLOCK (bv, i)) == b)
BLOCK_SUPERBLOCK (BLOCKVECTOR_BLOCK (bv, i)) = new;
return new;
1991-03-28 16:26:26 +00:00
}
/* Create a new symbol with printname NAME */
static struct symbol *
new_symbol (name)
char *name;
1991-03-28 16:26:26 +00:00
{
struct symbol *s = ((struct symbol *)
obstack_alloc (&current_objfile->symbol_obstack,
sizeof (struct symbol)));
1991-03-28 16:26:26 +00:00
memset ((PTR) s, 0, sizeof (*s));
SYMBOL_NAME (s) = name;
return s;
1991-03-28 16:26:26 +00:00
}
/* Create a new type with printname NAME */
static struct type *
new_type (name)
char *name;
1991-03-28 16:26:26 +00:00
{
struct type *t;
1991-03-28 16:26:26 +00:00
t = alloc_type (current_objfile);
TYPE_NAME (t) = name;
TYPE_CPLUS_SPECIFIC (t) = (struct cplus_struct_type *) &cplus_struct_default;
return t;
1991-03-28 16:26:26 +00:00
}
1991-03-28 16:26:26 +00:00
/* Things used for calling functions in the inferior.
These functions are exported to our companion
mips-tdep.c file and are here because they play
1991-03-28 16:26:26 +00:00
with the symbol-table explicitly. */
/* Sigtramp: make sure we have all the necessary information
about the signal trampoline code. Since the official code
from MIPS does not do so, we make up that information ourselves.
If they fix the library (unlikely) this code will neutralize itself. */
static void
fixup_sigtramp ()
1991-03-28 16:26:26 +00:00
{
struct symbol *s;
struct symtab *st;
struct block *b, *b0;
1991-03-28 16:26:26 +00:00
sigtramp_address = -1;
1991-03-28 16:26:26 +00:00
/* We know it is sold as sigvec */
s = lookup_symbol ("sigvec", 0, VAR_NAMESPACE, 0, NULL);
1991-03-28 16:26:26 +00:00
/* Most programs do not play with signals */
if (s == 0)
s = lookup_symbol ("_sigtramp", 0, VAR_NAMESPACE, 0, NULL);
else
{
b0 = SYMBOL_BLOCK_VALUE (s);
1991-03-28 16:26:26 +00:00
/* A label of sigvec, to be more precise */
s = lookup_symbol ("sigtramp", b0, VAR_NAMESPACE, 0, NULL);
}
/* But maybe this program uses its own version of sigvec */
if (s == 0)
return;
1991-03-28 16:26:26 +00:00
/* Did we or MIPSco fix the library ? */
if (SYMBOL_CLASS (s) == LOC_BLOCK)
{
sigtramp_address = BLOCK_START (SYMBOL_BLOCK_VALUE (s));
sigtramp_end = BLOCK_END (SYMBOL_BLOCK_VALUE (s));
return;
}
1991-03-28 16:26:26 +00:00
sigtramp_address = SYMBOL_VALUE (s);
sigtramp_end = sigtramp_address + 0x88; /* black magic */
/* But what symtab does it live in ? */
st = find_pc_symtab (SYMBOL_VALUE (s));
/*
* Ok, there goes the fix: turn it into a procedure, with all the
* needed info. Note we make it a nested procedure of sigvec,
* which is the way the (assembly) code is actually written.
*/
SYMBOL_NAMESPACE (s) = VAR_NAMESPACE;
SYMBOL_CLASS (s) = LOC_BLOCK;
SYMBOL_TYPE (s) = init_type (TYPE_CODE_FUNC, 4, 0, (char *) NULL,
(struct objfile *) NULL);
TYPE_TARGET_TYPE (SYMBOL_TYPE (s)) = builtin_type_void;
/* Need a block to allocate MIPS_EFI_SYMBOL_NAME in */
b = new_block (1);
SYMBOL_BLOCK_VALUE (s) = b;
BLOCK_START (b) = sigtramp_address;
BLOCK_END (b) = sigtramp_end;
BLOCK_FUNCTION (b) = s;
BLOCK_SUPERBLOCK (b) = BLOCK_SUPERBLOCK (b0);
add_block (b, st);
sort_blocks (st);
/* Make a MIPS_EFI_SYMBOL_NAME entry for it */
{
struct mips_extra_func_info *e =
((struct mips_extra_func_info *)
xzalloc (sizeof (struct mips_extra_func_info)));
e->numargs = 0; /* the kernel thinks otherwise */
/* align_longword(sigcontext + SIGFRAME) */
e->pdr.frameoffset = 0x150;
e->pdr.framereg = SP_REGNUM;
/* read_next_frame_reg provides the true pc at the time of signal */
e->pdr.pcreg = PC_REGNUM;
e->pdr.regmask = -2;
e->pdr.regoffset = -(41 * sizeof (int));
e->pdr.fregmask = -1;
e->pdr.fregoffset = -(7 * sizeof (int));
e->pdr.isym = (long) s;
current_objfile = st->objfile; /* Keep new_symbol happy */
s = new_symbol (MIPS_EFI_SYMBOL_NAME);
SYMBOL_VALUE (s) = (int) e;
SYMBOL_NAMESPACE (s) = LABEL_NAMESPACE;
SYMBOL_CLASS (s) = LOC_CONST;
SYMBOL_TYPE (s) = builtin_type_void;
current_objfile = NULL;
}
1991-03-28 16:26:26 +00:00
BLOCK_SYM (b, BLOCK_NSYMS (b)++) = s;
1991-03-28 16:26:26 +00:00
}
/* Fake up identical offsets for all sections. */
struct section_offsets *
mipscoff_symfile_offsets (objfile, addr)
struct objfile *objfile;
CORE_ADDR addr;
{
struct section_offsets *section_offsets;
int i;
section_offsets = ((struct section_offsets *)
obstack_alloc (&objfile->psymbol_obstack,
(sizeof (struct section_offsets)
+ (sizeof (section_offsets->offsets)
* (SECT_OFF_MAX - 1)))));
for (i = 0; i < SECT_OFF_MAX; i++)
ANOFFSET (section_offsets, i) = addr;
return section_offsets;
}
1991-03-28 16:26:26 +00:00
/* Initialization */
* coffread.c, mipsread.c, xcoffread.c, coffread.c, dbxread.c, elfread.c (coff_symfile_finish): Add function, prototype, and add to the xxxx_sym_fns struct for each file type. Also reformat the xxxx_sym_fns vector to a standard format and add comments. * coffread.c, mipsread.c, xcoffread.c, coffread.c, dbxread.c, elfread.c (xxx_symfile_new_init, xxx_symfile_init, xxx_symfile_read): Pass pointer to struct objfile rather than pointer to sym_fns. Change references inside each function accordingly. Allocate any symbol file specific info in the per-objfile memory region. * dbxread.c (free_and_init_header_files): Break function into free_header_files(), called from dbx_symfile_finish(), and init_header_files(), called from dbx_new_init(). * dbxread.c (dbx_new_init): Move deallocation things to new dbx_symfile_finish function. * elfread.c (elf_new_init): Call buildsym_new_init(). * objfiles.c (free_objfile): Call the appropriate symfile_finish() routine for the objfile before deallocating other stuff. * sparc-tdep.c (get_longjmp_target): Cast target_read_memory arg. * symfile.h: Move struct sym_fns to before struct objfile def. Add sym_finish function pointer and change prototypes of other function pointers to reflect passing struct objfile pointer rather than struct sym_fns pointer. * symfile.c: Remove now obsolete symtab_fns pointer. * symfile.c (symfile_init): Renamed to find_sym_fns, and now only locates the correct sym_fns struct for the given objfile. * symfile.c (syms_from_objfile, symbol_file_add): Restructured for better support of mapped symbol tables. * symfile.c (symbol_file_command): Remove obsolete code using symfile_fns. * symfile.h: Remove duplicate declarations for symfile_objfile, entry_point, and object_files. * target.c (target_info): Compare symfile_objfile to NULL. * xcoffread.c (aixcoff_new_init): Move deallocation stuff to aixcoff_symfile_finish().
1992-03-19 21:57:15 +00:00
static struct sym_fns ecoff_sym_fns =
{
"ecoff", /* sym_name: name or name prefix of BFD target type */
5, /* sym_namelen: number of significant sym_name chars */
mipscoff_new_init, /* sym_new_init: init anything gbl to entire symtab */
mipscoff_symfile_init, /* sym_init: read initial info, setup for sym_read() */
mipscoff_symfile_read, /* sym_read: read a symbol file into symtab */
mipscoff_symfile_finish, /* sym_finish: finished with file, cleanup */
mipscoff_symfile_offsets, /* sym_offsets: dummy FIXME til implem sym reloc */
NULL /* next: pointer to next struct sym_fns */
* coffread.c, mipsread.c, xcoffread.c, coffread.c, dbxread.c, elfread.c (coff_symfile_finish): Add function, prototype, and add to the xxxx_sym_fns struct for each file type. Also reformat the xxxx_sym_fns vector to a standard format and add comments. * coffread.c, mipsread.c, xcoffread.c, coffread.c, dbxread.c, elfread.c (xxx_symfile_new_init, xxx_symfile_init, xxx_symfile_read): Pass pointer to struct objfile rather than pointer to sym_fns. Change references inside each function accordingly. Allocate any symbol file specific info in the per-objfile memory region. * dbxread.c (free_and_init_header_files): Break function into free_header_files(), called from dbx_symfile_finish(), and init_header_files(), called from dbx_new_init(). * dbxread.c (dbx_new_init): Move deallocation things to new dbx_symfile_finish function. * elfread.c (elf_new_init): Call buildsym_new_init(). * objfiles.c (free_objfile): Call the appropriate symfile_finish() routine for the objfile before deallocating other stuff. * sparc-tdep.c (get_longjmp_target): Cast target_read_memory arg. * symfile.h: Move struct sym_fns to before struct objfile def. Add sym_finish function pointer and change prototypes of other function pointers to reflect passing struct objfile pointer rather than struct sym_fns pointer. * symfile.c: Remove now obsolete symtab_fns pointer. * symfile.c (symfile_init): Renamed to find_sym_fns, and now only locates the correct sym_fns struct for the given objfile. * symfile.c (syms_from_objfile, symbol_file_add): Restructured for better support of mapped symbol tables. * symfile.c (symbol_file_command): Remove obsolete code using symfile_fns. * symfile.h: Remove duplicate declarations for symfile_objfile, entry_point, and object_files. * target.c (target_info): Compare symfile_objfile to NULL. * xcoffread.c (aixcoff_new_init): Move deallocation stuff to aixcoff_symfile_finish().
1992-03-19 21:57:15 +00:00
};
1991-03-28 16:26:26 +00:00
void
1991-03-28 16:26:26 +00:00
_initialize_mipsread ()
{
add_symtab_fns (&ecoff_sym_fns);
/* Missing basic types */
builtin_type_string =
init_type (TYPE_CODE_STRING,
TARGET_CHAR_BIT / TARGET_CHAR_BIT,
0, "string",
(struct objfile *) NULL);
builtin_type_complex =
init_type (TYPE_CODE_FLT,
TARGET_COMPLEX_BIT / TARGET_CHAR_BIT,
0, "complex",
(struct objfile *) NULL);
builtin_type_double_complex =
init_type (TYPE_CODE_FLT,
TARGET_DOUBLE_COMPLEX_BIT / TARGET_CHAR_BIT,
0, "double complex",
(struct objfile *) NULL);
builtin_type_fixed_dec =
init_type (TYPE_CODE_INT,
TARGET_INT_BIT / TARGET_CHAR_BIT,
0, "fixed decimal",
(struct objfile *) NULL);
builtin_type_float_dec =
init_type (TYPE_CODE_FLT,
TARGET_DOUBLE_BIT / TARGET_CHAR_BIT,
0, "floating decimal",
(struct objfile *) NULL);
1991-03-28 16:26:26 +00:00
}