darling-gdb/gdb/i386lynx-nat.c

<<<<<<< 2.6 is dead >>>>>>>
/* Native-dependent code for Lynx running on i386's, for GDB.
   Copyright 1988, 1989, 1991, 1992, 1993
   Free Software Foundation, Inc.

This file is part of GDB.

This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */

#include "defs.h"
#include "frame.h"
#include "inferior.h"
#include "target.h"

#include <sys/ptrace.h>
#include "/usr/include/sys/wait.h"

/* these values indicate the offset of the named register in the econtext
   structure */

#define	EAX	10
#define	ECX	9
#define	EDX	8
#define	EBX	7
#define	ESP	16
#define	EBP	5
#define	ESI	4
#define	EDI	3
#define	EIP	13
#define	EFL	15
#define	CS	14
#define	SS	17
#define	DS	2
#define	ES	1

/* Currently these are not being used. So set them to 0 */

#define	FS	0
#define	GS	0

/* this table must line up with REGISTER_NAMES in m-i386.h */
static unsigned int regmap[] = 
{
  EAX, ECX, EDX, EBX,
  ESP, EBP, ESI, EDI,
  EIP, EFL, CS, SS,
  DS, ES, FS, GS,
};

/* Return the address in the core dump or inferior of register REGNO.
   BLOCKEND is the address of the econtext structure */

static unsigned int
register_addr (regno, blockend)
     int regno, blockend;
{
  if (regno < 0 || regno >= NUM_REGS)
    error ("Invalid register number %d.", regno);

  return (blockend + regmap[regno] * sizeof (long));
}

/* Fetch one register.  */

static void
fetch_register (regno, offset, bpid)
     int regno, bpid;
     unsigned int offset;
{
  unsigned int regaddr;
  char buf[MAX_REGISTER_RAW_SIZE];
  char mess[128];				/* For messages */
  int i;

  regaddr = register_addr (regno, offset);
  for (i = 0; i < REGISTER_RAW_SIZE (regno); i += sizeof (int))
    {
      errno = 0;
      *(int *) &buf[i] = ptrace (PTRACE_PEEKTHREAD, bpid,
				 (PTRACE_ARG3_TYPE) regaddr, 0);
      regaddr += sizeof (int);
      if (errno != 0)
	{
	  sprintf (mess, "reading register %s (#%d)", reg_names[regno], regno);
	  perror_with_name (mess);
	}
    }
  supply_register (regno, buf);
}

/* Store our register values back into the inferior.
   If REGNO is -1, do this for all registers.
   Otherwise, REGNO specifies which register (so we can save time).  */

static void
store_register (regno, offset, bpid)
     int regno, bpid;
     unsigned int offset;
{
  unsigned int regaddr;
  char mess[128];
  extern char registers[];
  int i;

  regaddr = register_addr (regno, offset);
  for (i = 0; i < REGISTER_RAW_SIZE (regno); i += sizeof(int))
    {
      errno = 0;
      ptrace (PTRACE_POKEUSER, bpid, (PTRACE_ARG3_TYPE) regaddr,
	      *(int *) &registers[REGISTER_BYTE (regno) + i]);
      if (errno != 0)
        {  
	  sprintf (mess, "writing register number %d(%d)", regno, i);
	  perror_with_name (mess);
        }
      regaddr += sizeof(int);
    }
}

/* return an offset for use with register_addr() */

static unsigned int
fetch_offset (pid)
    int pid;
{
  struct st_entry s;
  unsigned int specpage_off, offset = (char *) &s.ecp - (char *) &s;

  errno = 0;
  specpage_off = ptrace (PTRACE_THREADUSER, pid, (PTRACE_ARG3_TYPE) 0, 0);
  if (errno != 0)
    perror_with_name ("ptrace");
  errno = 0;
  offset = ptrace (PTRACE_PEEKTHREAD, pid, (PTRACE_ARG3_TYPE) offset, 0)
      - specpage_off;
  if (errno != 0)
    perror_with_name ("ptrace");
  return offset;
}

/* Fetch all registers, or just one, from the child process.  */

void
fetch_inferior_registers (regno)
     int regno;
{
  unsigned int offset = fetch_offset (inferior_pid);

  if (regno == -1)
    {
      for (regno = 0; regno < NUM_REGS; regno++)
        fetch_register (regno, offset, inferior_pid);
    }
  else
    fetch_register (regno, offset, inferior_pid);
}

/* Store all registers, or just one, to the child process.  */

void
store_inferior_registers (regno)
     int regno;
{
    unsigned int offset = fetch_offset (inferior_pid);

    if (regno == -1)
      {
        for (regno = 0; regno < NUM_REGS; regno++)
	  store_register (regno, offset, inferior_pid);
      }
    else
      store_register (regno, offset, inferior_pid);
}

/* Wait for child to do something.  Return pid of child, or -1 in case
   of error; store status through argument pointer STATUS.  */

int
child_wait (pid, status)
     int pid;
     int *status;
{
  int save_errno;
  int thread;

  while (1)
    {
      int sig;

      if (attach_flag)
	set_sigint_trap();	/* Causes SIGINT to be passed on to the
				   attached process. */
      pid = wait (status);
      save_errno = errno;

      if (attach_flag)
	clear_sigint_trap();

      if (pid == -1)
	{
	  if (save_errno == EINTR)
	    continue;
	  fprintf_unfiltered (gdb_stderr, "Child process unexpectedly missing: %s.\n",
		   safe_strerror (save_errno));
	  *status = 42;		/* Claim it exited with signal 42 */
	  return -1;
	}

      if (pid != PIDGET (inferior_pid))	/* Some other process?!? */
	continue;

/*      thread = WIFTID (*status);*/
      thread = *status >> 16;

      /* Initial thread value can only be acquired via wait, so we have to
	 resort to this hack.  */

      if (TIDGET (inferior_pid) == 0)
	{
	  inferior_pid = BUILDPID (inferior_pid, thread);
	  add_thread (inferior_pid);
	}

      pid = BUILDPID (pid, thread);

      return pid;
    }
}

/* Convert a Lynx process ID to a string.  Returns the string in a static
   buffer.  */

char *
i386lynx_pid_to_str (pid)
     int pid;
{
  static char buf[40];

  sprintf (buf, "process %d thread %d", PIDGET (pid), TIDGET (pid));

  return buf;
}

/* Extract the register values out of the core file and store
   them where `read_register' will find them.

   CORE_REG_SECT points to the register values themselves, read into memory.
   CORE_REG_SIZE is the size of that area.
   WHICH says which set of registers we are handling (0 = int, 2 = float
         on machines where they are discontiguous).
   REG_ADDR is the offset from u.u_ar0 to the register values relative to
            core_reg_sect.  This is used with old-fashioned core files to
	    locate the registers in a large upage-plus-stack ".reg" section.
	    Original upage address X is at location core_reg_sect+x+reg_addr.
 */

void
fetch_core_registers (core_reg_sect, core_reg_size, which, reg_addr)
     char *core_reg_sect;
     unsigned core_reg_size;
     int which;
     unsigned reg_addr;
{
  struct st_entry s;
  unsigned int regno, addr;

  for (regno = 0; regno < NUM_REGS; regno++)
    {
      addr = register_addr (regno, (char *) &s.ec - (char *) &s);
      supply_register (regno, core_reg_sect + addr);
    }
}