darling-gdb/gdb/doc/ChangeLog

1547 lines
51 KiB
Plaintext
Raw Normal View History

1999-06-07 19:19:32 +00:00
Mon Jun 7 15:49:40 1999 Stan Shebs <shebs@andros.cygnus.com>
From Per Bothner <bothner@cygnus.com>:
* gdb.texinfo: Document Chill support.
Fri Jun 4 16:58:22 1999 Andrew Cagney <cagney@b1.cygnus.com>
* gdbint.texinfo (SP_REGNUM, FP_REGNUM, PC_REGNUM): Add reference
to corresponding TARGET_READ_reg TARGET_WRITE_reg macros.
Document that the value should be greater-than or equal-to zero.
(NO_STD_REGS): Document. Deprecate.
1999-06-01 15:44:41 +00:00
Tue Jun 1 15:04:15 1999 Andrew Cagney <cagney@b1.cygnus.com>
* gdbint.texinfo (TARGET_COMPLEX_BIT, TARGET_DOUBLE_COMPLEX_BIT):
Document that these are not used.
Thu May 27 09:28:15 1999 Andrew Cagney <cagney@b1.cygnus.com>
* gdbint.texinfo (EXTRACT_STRUCT_VALUE_ADDRESS_P): Document.
1999-05-25 18:09:09 +00:00
Mon May 24 10:07:39 1999 Andrew Cagney <cagney@b1.cygnus.com>
* gdbint.texinfo (FRAME_NUM_ARGS): Update definition. Parameter
numargs was dropped.
Thu May 20 12:26:59 1999 Andrew Cagney <cagney@b1.cygnus.com>
* gdbint.texinfo (FRAMELESS_FUNCTION_INVOCATION): Update.
1999-05-05 14:45:51 +00:00
Tue Apr 27 19:14:20 1999 Andrew Cagney <cagney@b1.cygnus.com>
* gdbint.texinfo (SKIP_PROLOGUE, SKIP_PROLOGUE_FRAMELESS_P):
Update.
1999-04-26 18:34:20 +00:00
Thu Apr 22 13:07:37 1999 Andrew Cagney <cagney@b1.cygnus.com>
* gdbint.texinfo (USE_GENERIC_DUMMY_FRAMES): Document.
(GET_SAVED_REGISTER): Update, not just the a29k uses this.
Wed Apr 21 13:59:01 1999 Dave Brolley <brolley@cygnus.com>
* gdbint.texinfo: Fix typos: $ -> @.
Tue Apr 20 11:59:38 1999 Andrew Cagney <cagney@b1.cygnus.com>
* gdbint.texinfo (REGISTER_NAMES, BREAKPOINT, BIG_BREAKPOINT,
LITTLE_BREAKPOINT, LITTLE_REMOTE_BREAKPOINT,
BIG_REMOTE_BREAKPOINT): Deprecate in favor of REGISTER_NAME and
BREAKPOINT_FROM_PC.
Mon Apr 12 16:00:44 1999 Andrew Cagney <cagney@b1.cygnus.com>
* gdbint.texinfo (CALL_DUMMY_STACK_ADJUST_P,
CALL_DUMMY_STACK_ADJUST): Document.
Thu Apr 8 17:23:15 1999 Andrew Cagney <cagney@b1.cygnus.com>
* gdbint.texinfo (CALL_DUMMY_P, CALL_DUMMY_WORDS,
SIZEOF_CALL_DUMMY_WORDS, CALL_DUMMY): Define.
1999-04-02 Stan Shebs <shebs@andros.cygnus.com>
* gdbint.texinfo (MAINTENANCE_CMDS): Remove ref, since it no
longer exists.
Tue Mar 9 19:25:11 1999 Stan Shebs <shebs@andros.cygnus.com>
* gdb.texinfo, remote.texi, all-cfg.texi, HPPA-cfg.texi: Remove
nearly all @ifset/@ifclear conditionals; nobody uses them, and
they make the manual source incomprehensible.
* h8-cfg.texi: Remove, hasn't been used in years.
Thu Feb 11 18:00:59 1999 Stan Shebs <shebs@andros.cygnus.com>
* gdb.texinfo: Update the credits.
Mon Feb 8 17:33:57 1999 Stan Shebs <shebs@andros.cygnus.com>
* gdb.texinfo: Fix mistakes noticed in printout of last
draft, add Alpha to discussion of heuristic fence post.
Fri Feb 5 17:20:00 1999 Stan Shebs <shebs@andros.cygnus.com>
* gdb.texinfo, remote.texi: Many changes; update to Seventh
Edition, merge some HP changes into mainline, describe some
previously undocumented features, describe more of the target
commands available, eliminate obsolete section on renamed
commands.
* all-cfg.texi, HPPA-cfg.texi: Remove some obsolete conditionals.
Wed Jan 20 17:47:45 1999 Stan Shebs <shebs@andros.cygnus.com>
* gdb.texinfo: Make many HPPA conditionals unconditional,
including catchpoint description, since now on for all configs.
* all-cfg.texi: @clear HPPA, since is mainly for very HP-specific
specializations.
Thu Jan 14 17:10:12 1999 Stan Shebs <shebs@andros.cygnus.com>
* Makefile.in (GDBvn.texi): Fix match expression to work with
current format of VERSION in gdb/Makefile.in.
* gdb.texinfo: Fix node ref to match new readline.
Wed Jan 13 10:38:40 1999 Edith Epstein <eepstein@sophia.cygnus.com>
* gdb.texinfo: Changes made as part of a project to merge in
changes made by HP. Documentation makes extensive use of
@ifclear HPPA and @ifset HPPA. The HP manual omits doumentation
on remote debugging. There are differences in documentation
(HP vs. non-HP) on C++ support (aCC vs. gnu gcc++). Also,
the HP manual discusses catchpoints, hardware watchpoints, and
some HPUX specific limitations for shared library support.
There are also a number of @node changes.
1999-01-12 Jason Molenda (jsm@bugshack.cygnus.com)
* gdbint.texinfo (Formatting): Disambiguate a sentence.
(C Usage): Same.
Wed Jan 6 11:55:34 1999 David Taylor <taylor@texas.cygnus.com>
The following changes were made by Edith Epstein
<eepstein@cygnus.com> as part of a project to merge in changes
made by HP.
* HPPA-cfg.texi: new file.
* all-cfg.texi: set HPPA for HP PA-RISC targets.
* refcard.tex: change documentation about catch.
removed info catch.
Mon Jan 4 18:29:18 1999 Stan Shebs <shebs@andros.cygnus.com>
* gdbint.texinfo: Expand on GDB's coding standards,
specify the use of arg names with prototypes.
1998-12-14 J.T. Conklin <jtc@redbacknetworks.com>
* gdb.texinfo: Fix tipo.
Sun Dec 13 10:27:59 1998 Andrew Cagney <cagney@b1.cygnus.com>
* gdbint.texinfo: Document TARGET_BYTE_ORDER_DEFAULT and
TARGET_BYTE_ORDER_SELECTABLE_P.
Thu Dec 10 16:07:09 1998 Andrew Cagney <cagney@b1.cygnus.com>
* gdbint.texinfo (FRAME_FIND_SAVED_REGS): Document.
1998-12-09 Jim Blandy <jimb@zwingli.cygnus.com>
* agentexpr.texi: New file.
Wed Dec 9 21:13:57 1998 Andrew Cagney <cagney@chook>
* gdbint.texinfo (REGISTER_NAME): Replace REGISTER_NAMES.
1998-12-03 J.T. Conklin <jtc@redbacknetworks.com>
* remote.texi: Changed wording that implied that the GDB remote
protocol caches register values instead of GDB itself.
Tue Dec 1 17:45:43 1998 Stan Shebs <shebs@andros.cygnus.com>
* gdbint.texinfo: Add some info about symbol readers.
(CHILL_PRODUCER, etc): Comment out descriptions, not useful.
(IN_SOLIB_CALL_TRAMPOLINE): Rename info from IN_SOLIB_TRAMPOLINE.
(IN_SOLIB_RETURN_TRAMPOLINE): Describe.
(KERNEL_DEBUGGING, MIPSEL): No info about these, remove.
Mon Nov 30 11:32:21 1998 Andrew Cagney <cagney@chook>
* gdbint.texinfo (FRAME_CHAIN_VALID_ALTERNATE):
Sat Nov 28 13:45:53 1998 Andrew Cagney <cagney@b1.cygnus.com>
* gdbint.texinfo (INNER_THAN): Update, now takes parameters.
Fri Nov 27 12:39:45 1998 Andrew Cagney <cagney@chook>
* gdbint.texinfo (NO_SINGLE_STEP): Replace with
SOFTWARE_SINGLE_STEP_P and SOFTWARE_SINGLE_STEP.
Wed Oct 14 10:02:40 1998 Andrew Cagney <cagney@b1.cygnus.com>
* gdbint.texinfo: Fix minor typos.
Wed Sep 30 18:03:19 1998 Stan Shebs <shebs@andros.cygnus.com>
* gdbint.texinfo: Complete overhaul. Group descriptions more
logically, add more info on generic algorithms, remove much
obsolete and/or wrong material.
Fri Jul 24 17:51:38 1998 Ian Lance Taylor <ian@cygnus.com>
* stabs.texinfo (Method Type Descriptor): Expand and correct.
Mon May 4 10:37:12 1998 Brian Youmans (3diff@gnu.org)
* refcard.tex: Copyright, address updates.
Tue Apr 21 18:09:56 1998 Stan Shebs <shebs@andros.cygnus.com>
* gdb.texinfo (EDITION, DATE): Update and change to use ordinals
for the edition instead of confusing GDB-version-like numbers.
Mon Apr 13 14:05:00 1998 Fred Fish <fnf@cygnus.com>
* gdb.texinfo (hbreak, watch): Fix typo, "date" -> "data".
Thu Apr 2 16:52:44 1998 Jason Molenda (crash@bugshack.cygnus.com)
* LRS: Reformat a bit to keep text under 80 columns.
Thu Apr 2 16:10:36 1998 Stan Shebs <shebs@andros.cygnus.com>
* gdb.texinfo: Add some credits, mention bug monitor.
* remote.texi: Mention mips monitor targets.
* gdbint.texinfo: Describe SP_REGNUM, STEP_SKIPS_DELAY.
Mon Feb 2 17:13:03 1998 Stan Shebs <shebs@andros.cygnus.com>
* gdbint.texinfo: Remove obsolete mentions of pinsn.c and opcode.h
files, finish sorting of host vs target vs native macros, describe
some more of them.
Tue Jan 13 16:44:50 1998 Fred Fish <fnf@cygnus.com>
* gdbint.texinfo (Host Conditionals): Document change from
using NO_MMALLOC to it's inverse, USE_MMALLOC.
Mon Nov 24 13:55:21 1997 Andrew Cagney <cagney@b1.cygnus.com>
* gdbint.texinfo (Host Conditionals): Document
PRINTF_HAS_LONG_DOUBLE, SCANF_HAS_LONG_DOUBLE, HAVE_LONG_DOUBLE.
Fri Jul 4 14:52:31 1997 Ian Lance Taylor <ian@cygnus.com>
* gdbint.texinfo (Host Conditionals): Add CRLF_SOURCE_LINES.
Document LSEEK_NOT_LINEAR.
Tue Mar 25 14:44:09 1997 Ian Lance Taylor <ian@cygnus.com>
* stabs.texinfo (Stab Section Basics): Make it clear that only
some versions of the GNU linker remove the leading N_UNDF symbol.
Thu Feb 27 17:45:19 1997 Ian Lance Taylor <ian@cygnus.com>
* stabs.texinfo (String Field): Document type number pairs here,
instead of in the Sun specific section.
(Include Files): The GNU linker supports the N_BINCL
optimization. Clarify the N_BINCL value, and what it is used
for.
(Procedures): Document N_FUN with an empty string to mark the end
of a function.
(Typedefs): Mention that Sun compilers may use N_GSYM for a type.
(Sun Differences): Remove this node, as the information is now
elsewhere in the main document.
(Stab Section Basics): Mention that the GNU linker may optimize
stabs and remove the leading N_UNDF symbol.
Mon Dec 9 12:23:32 1996 Roland Pesch <roland@wrs.com>
* gdb.texinfo, refcard.tex: Restore author credit
Wed Oct 2 22:01:36 1996 Fred Fish <fnf@fishfood.ninemoons.com>
* gdbint.texinfo (SIGTRAMP_START, SIGTRAMP_END): Update
documentation to account for START and END macros taking
one arg.
Thu Aug 22 17:59:03 1996 Fred Fish <fnf@cygnus.com>
From: Eberhard Mattes <mattes@azu.informatik.uni-stuttgart.de>
* gdb.texinfo (Frames): Fix typo.
Tue Jul 23 10:06:20 1996 Fred Fish <fnf@cygnus.com>
* gdbint.texinfo (NO_SINGLE_STEP): Document that single_step takes
a target_signal as arg type, not a pid.
Fri Jul 12 11:10:05 1996 Stu Grossman (grossman@critters.cygnus.com)
* gdb.texinfo: Document `set assembly-language'.
Thu Jul 11 13:50:28 1996 Stan Shebs <shebs@andros.cygnus.com>
* remote.texi: Update list of stubs in the GDB distribution.
Fri Jul 5 15:38:54 1996 Fred Fish <fnf@cygnus.com>
* gdbint.texinfo (NO_MMCHECK): Renamed from NO_MMALLOC_CHECK.
Also document that some systems can use mmalloc but must define
this if their C runtime allocates memory that is later freed.
(MMCHECK_FORCE): Document new macro.
Fri Jun 28 22:17:10 1996 Dawn Perchik <dawn@cygnus.com>
* remote.texi: Add documentation for target Sparclet.
Mon Jun 24 18:12:22 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
* Makefile.in (srcdir, VPATH, prefix, infodir, INSTALL,
INSTALL_PROGRAM, INSTALL_DATA): Use autoconf set values.
* configure.in: Rewritten for autoconf.
* configure: New.
Mon Jun 17 10:43:41 1996 Fred Fish <fnf@cygnus.com>
* Makefile.in (DVIPS): New define, set to dvips.
(dvi): Add stabs.dvi.
(ps): New target.
(all-doc): Depend on info, dvi, and ps targets.
(STAGESTUFF): Add *.ps and *.dvi files.
(clean-info, clean-dvi): Remove.
(mostlyclean): Does not depend upon clean-info or clean-dvi,
rules completely rewritten.
(maintainer-clean): Remove clean-info and clean-dvi
dependencies and put their actions in the rules.
(gdb.ps): New target
(gdb.dvi, gdbgui.dvi, gdbint.dvi, stabs.dvi): Remove
intermediate TeX files, whether they have 2 or 3 character
extensions.
(gdbint.ps): Add target and rules.
(gdb-internals): Delete unused target.
(Makefile): Depends upon config.status also.
Sat Mar 30 15:46:58 1996 Fred Fish <fnf@cygnus.com>
* gdbint.texinfo (CC_HAS_LONG_LONG): Clarify when/how this is
set.
Sat Mar 16 15:10:20 1996 Fred Fish <fnf@cygnus.com>
From Peter Schauer <Peter.Schauer@Regent.E-Technik.TU-Muenchen.DE>
* gdb.texinfo (Expressions): Fix erroneous array constant example.
Sat Mar 16 13:28:45 1996 Fred Fish <fnf@cygnus.com>
* gdb.texinfo: Add missing "@bullet" to some "@itemize" commands.
Sat Feb 10 03:28:36 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
* gdb.texinfo (Print settings): Document
`set/show print static-members' commands.
Wed Jan 10 14:16:37 1996 Fred Fish <fnf@cygnus.com>
* gdbint.texinfo (Native): Document name change, coredep.c to
core-aout.c.
Wed Dec 13 12:35:28 1995 Ian Lance Taylor <ian@cygnus.com>
* stabs.texinfo (Include Files): Document the values the SunOS4
linker creates for N_BINCL/N_EINCL/N_EXCL stabs.
Fri Dec 8 21:08:44 1995 Fred Fish <fnf@cygnus.com>
* gdbint.texinfo (Releases): Change gdb.tar.Z to gdb.tar.gz.
Fix typo.
Fri Dec 1 11:07:50 1995 Fred Fish <fnf@cygnus.com>
* gdbint.texinfo (Releases): Make "gdb.tar.gz" rather than
"gdb.tar.Z".
Wed Sep 20 13:14:10 1995 Ian Lance Taylor <ian@cygnus.com>
* Makefile.in (maintainer-clean): New target, synonym for
realclean.
Thu Aug 3 10:45:37 1995 Fred Fish <fnf@cygnus.com>
* Update all FSF addresses except those in COPYING* files.
Wed Jul 19 18:43:03 1995 Stan Shebs <shebs@andros.cygnus.com>
From Richard Earnshaw (rearnsha@armltd.co.uk):
* gdb.texinfo (convenience variables): Document $_exitcode.
(quit): Document optional expression to use as exit code.
Thu Jun 22 21:27:33 1995 Victoria Mixon <victoria@cygnus.com>
* gdb.texinfo, remote.texi: Brought up to date with various
GDB changes.
Tue Jun 20 14:35:38 1995 Stan Shebs <shebs@andros.cygnus.com>
* gdb.texinfo: Update dates and versions, fix comments about
hardware watchpoints in future releases and about the
sharedlibrary command.
Mon May 8 09:30:36 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
* stabs.texinfo: Remove node `XCOFF differences'. Describe value of
C_FUN stab. Other cleanups.
Wed Apr 19 07:02:19 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
* remote.texi (Bootstrapping): Clarify that flush_i_cache is only
for the sparc stub.
Tue Apr 11 11:41:49 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
* annotate.texi: Clarify which addresses have differing formats
depending on the language and which do not.
Tue Mar 28 16:56:22 1995 J.T. Conklin <jtc@rtl.cygnus.com>
* remote.texi (NetWare): Changed example to use BOARD= instead of
NODE= argument to reflect correspoding change to gdbserve.nlm.
Fri Mar 17 06:47:02 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
* stabs.texinfo (Negative Type Numbers): Mention the fact that
GDB, as well as AIX dbx, supports the size type attribute.
Thu Mar 16 12:11:32 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
* stabs.texinfo (Negative Type Numbers): Document types -31 to -34.
Mon Mar 13 16:49:13 1995 Per Bothner <bothner@kalessin.cygnus.com>
* gdb.texinfo (Define): Document $arg0... arguments to commands,
and new 'if' and 'while' commands.
Fri Feb 17 15:24:35 1995 Per Bothner <bothner@kalessin.cygnus.com>
* gdb.texinfo (Artificial arrays): Note use of coerce-to-array-type.
Wed Feb 15 11:59:18 1995 J.T. Conklin <jtc@rtl.cygnus.com>
* all-cfg.texi: New flag, GDBSERVE, for NetWare's gdbserve.nlm.
* remote.texi (NetWare): New node, how to use gdbserve.nlm on
NetWare targets. Mostly stolen from the Server node.
Fri Feb 10 20:20:08 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
* gdb.texinfo (Setting): Talk about the language of a source file
versus the working language. The old documentation did not match
what GDB did.
Wed Feb 1 20:26:36 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
* stabs.texinfo (Source Files): Document N_SO used to mark the end
of a source file.
Mon Jan 23 14:23:37 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
* gdb.texinfo (Processes): New node.
Tue Jan 17 14:09:03 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
* remote.texi: Update documentation of set/show mipsfpu.
Sun Sep 4 16:47:21 1994 Stan Shebs (shebs@andros.cygnus.com)
* gdbint.texinfo: Removed mentions of some incorrectly placed and
obsolete conditionals, described some others.
Mon Aug 1 15:42:39 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* gdbint.texinfo: Remove references to BROKEN_LARGE_ALLOCA and
SET_STACK_LIMIT_HUGE; they were removed from GDB 14 May 1994.
Mon Aug 1 15:12:02 1994 Stan Shebs (shebs@andros.cygnus.com)
* gdbint.texinfo: Put regex conditionals in their own table.
Tue Jul 26 18:32:52 1994 Stan Shebs (shebs@andros.cygnus.com)
* gdbint.texinfo: Removed mentions of many obsolete conditionals,
described or fixed the descriptions of many others.
Sun Jul 17 14:14:03 1994 Stan Shebs (shebs@andros.cygnus.com)
* gdb.texinfo: Add some more credits.
* gdbint.texinfo: Capitalize GDB consistently, describe some
macros and remove some.
Thu Jul 14 18:43:17 1994 Stan Shebs (shebs@andros.cygnus.com)
* gdbint.texinfo: Removed mentions of many incorrectly placed and
obsolete conditionals, described some others.
Tue Jul 12 12:23:15 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
* gdb.texinfo (help targets): Changed to `help target', which
is the correct gdb command.
Wed Jun 22 18:00:51 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* annotate.texi (TODO): New node, for keeping track of annotations
suggested but not yet implemented.
Wed Jun 1 16:10:45 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* stabs.texinfo (Statics): Value of xcoff C_BSTAT points to
another symbol, it is not the address itself.
Thu May 5 20:23:36 1994 Stan Shebs (shebs@andros.cygnus.com)
* stabs.texinfo (Stab Section Basics): Add comment about alignment
of stabs-in-coff sections.
Wed May 4 06:26:11 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* annotate.texi: Change edition to 0.5 and date to May 1994.
Add index.
(Frames): New node, for frame annotation.
(Displays): New node, for display annotation.
* remote.texi (MIPS Remote): Say that set timeout doesn't apply
when waiting for your program to stop.
Fri Apr 29 18:24:46 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* annotate.texi (Breakpoint Info): Document annotation of header
fields and record annotation.
Thu Apr 28 07:44:28 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* annotate.texi: New file, to document annotations.
Thu Apr 21 14:20:51 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* Makefile.in (clean): Don't remove GDBvn.texi (apparently on Jan
16 I meant to make this change but did not). Do remove gdb-cfg.texi.
Wed Apr 20 11:22:48 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* stabs.texinfo (Stab Section Basics): Say what is in .stab
section, and say n_strx field is compilation unit relative.
* stabs.texinfo: Don't use @code for a.out when it is the name of
an object file format.
Wed Apr 13 20:29:54 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
* gdb.texinfo: Refer to file names, not path names, per rms
convention.
(Arguments): Fix typo.
Thu Mar 24 08:09:12 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* stabs.texinfo (Global Variables): Talk about stabs in files
where variables are referenced, but not defined.
Wed Mar 23 07:16:36 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* stabs.texinfo: Move stuff on @ and # type descriptors from node
Cplusplus to new nodes Member Type Descriptor and Method Type
Descriptor. Re-write stuff for #.
Wed Mar 16 08:20:19 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* gdb.texinfo (Print Settings): Don't document "set print
fast-symbolic-addr off". The bug which it worked around was fixed
on 25 Feb 94 in coffread.c, so I'm nuking the command.
* stabs.texinfo (Alternate Entry Points): New node, rewritten from
N_ENTRY node.
* stabs.texinfo (Type Descriptors): Add 'Y' type descriptor.
Tue Mar 15 08:43:02 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* gdbint.texinfo (Host Conditionals, Target Conditionals): Remove
references to ieee-float.c.
Fri Mar 11 08:09:40 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* gdb.texinfo (Set Breaks): Update documentation for tbreak to
match what the code actually does.
Wed Mar 9 19:43:05 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* stabs.texinfo (Symbol Descriptors): Add OS9000 symbol descriptor s.
Tue Mar 1 17:04:43 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
* stabs.texinfo (Type Descriptors): Add OS9000 type descriptors c,
i, and b.
Wed Feb 23 10:44:18 1994 Jim Kingdon (kingdon@rtl.cygnus.com)
* stabs.texinfo: Document N_RBRAC as function relative for COFF as
well as for ELF and SOM. Unify the descriptions of ELF and SOM
as "stabs in sections" rather than just saying "ELF and SOM".
Also make that stuff apply to COFF.
Fri Feb 18 08:25:58 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* gdb.texinfo (Formatting Documentation): Change GhostScript to
Ghostscript.
Fri Feb 4 06:31:31 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* gdb.texinfo (Continuing and Stepping): When talking about "step"
versus functions without line numbers, also mention stepping into
them as well as "step" when you are in them. Tell the user how to
deal with the situation. Add comment about "debugging information".
Thu Feb 3 11:39:59 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* stabs.texinfo (Enumerations): Document restriction on where
enumeration types can appear and still win with GDB.
Wed Feb 2 11:29:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* stabs.texinfo (Negative Type Numbers): Document format for type
-16.
Thu Jan 27 16:53:56 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* gdb.texinfo (Selection, Frame Info): Update information about
arbitrary frame specficiations.
Wed Jan 26 15:31:57 1994 Roland H. Pesch (pesch@fowanton.cygnus.com)
* gdb.texinfo, remote.texi: general editing pass prior to Net release
Tue Jan 25 12:12:04 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* stabs.texinfo (String Field): Discuss continuing stabs with ?.
Wed Jan 19 06:39:24 1994 David J. Mackenzie (djm@thepub.cygnus.com)
* stabs.texinfo (Non-Stab Symbol Types): Mention N_SET* | N_EXT.
Sun Jan 16 12:43:32 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* stabs.texinfo: Re-do stuff about C_BSTAT and move from XCOFF
Differences node to Statics node.
(Statics): Discuss XCOFF use of V symbol descriptor.
* Makefile.in: Remove refcard.dvi and GDBvn.texi in realclean,
not clean.
Wed Jan 12 21:29:54 1994 John Gilmore (gnu@cygnus.com)
* gdb.texinfo (Print Settings): Document `set print
fast-symbolic-addr' and improve the doc for some other
`set print's.
Mon Jan 3 17:23:07 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* stabs.texinfo (String Field): Talk about defining several type
numbers at once.
Fix lint regarding changing node ELF Transformations to
ELF and SOM Transformations.
Fri Dec 31 00:42:43 1993 John Gilmore (gnu@cygnus.com)
* stabs.texinfo: Insert Peter Kessler's name as inventor (I think).
Tue Dec 28 09:30:40 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
* stabs.texinfo (Cross-References): `::' is for nested types only
within <>.
(Structures): Document static members.
Mon Dec 27 13:55:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
* stabs.texinfo: Document S type attribute.
Sun Dec 26 20:46:36 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
* stabs.texinfo: Add notes about stabs-in-som where appropriate.
Fri Dec 3 19:13:19 1993 John Gilmore (gnu@cygnus.com)
* gdbint.texinfo: Fix a few typos.
Sun Nov 28 18:06:25 1993 Roland H. Pesch (pesch@fowanton.cygnus.com)
* gdb.texinfo, remote.texi: formatting improvements
* gdb.texinfo (New Features): mention threads.
(Summary, C): fix xrefs in newly contributed text.
(Threads): index entries, clarifications, example
(passim): minor typos fixed, phrasing improvements
* remote.texi (Bootstrapping): rephrase text on ^C and add index
entries; (Server): explain use of gdbserver w/real-time systems,
add example of conflicting TCP port; (MIPS Remote) break up
running text into table, highlighting commands, and add example.
Wed Nov 24 14:15:56 1993 Roland H. Pesch (pesch@fowanton.cygnus.com)
* refcard.tex: avoid bad linebreaks even when REFEDITS=psrc.sed
Fri Nov 12 16:10:58 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
* stabs.texinfo (Nested Symbols): New node.
(String Field, Symbol Descriptors, Cross-References): Refer to it.
Thu Nov 11 13:26:45 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
* stabs.texinfo (Stabs in ELF): Clarify how Bbss.bss work with respect
to picking which Bbss.bss symbol to use, and (because there seems to
be no good way of doing it) re-write some of the text to make it
sound like Bbss.bss isn't such a great idea after all (as currently
designed).
* gdb.texinfo (C): In addition to saying people have to use g++ for
good results, say they have to use stabs. Specifically say cfront
doesn't work well.
(Summary): Merge in information on Modula-2, Pascal, and Chill from
the gdb README. Add xrefs to places where the support for the various
languages is described in detail.
Mon Nov 8 11:47:34 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
* stabs.texinfo: Clean up stuff about visibility and virtual
characters.
* stabs.texinfo (N_M2C): Cite Sun doc.
Fri Nov 5 16:27:27 1993 Roland H. Pesch (pesch@fowanton.cygnus.com)
* gdb.texinfo: updates re threads.
* remote.texinfo: avoid index entries starting with digits.
Tue Nov 2 09:08:37 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
* stabs.texinfo (Enumerations): Talk about large, negative and
octal values. Clean up cross reference to type attributes.
(String Field): Say that GDB 4.11 supports size attribute.
Sun Oct 31 13:31:10 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
* remote.texi (VxWorks Remote): Clarify that rebuilding VxWorks kernel
is a mandatory step. Make the stuff about that more concise.
Wed Oct 27 00:25:46 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
* stabs.texinfo (Class Names): New node.
* gdb.texinfo (Command Files): Explain order of init file reading.
* remote.texi (Bootstrapping): Talk about getting the serial driver
to deal with ^C sent by gdb to stop the remote system.
Mon Oct 25 03:25:41 1993 Tom Lord (lord@cygnus.com)
* libgdb.texinfo (I/O): incorporated better phrasing from rich.
* libgdb.texinfo (Defining Commands): made the DOC arg
to gdb_define_app_command a char * instead of char **
per a suggestion from kingdon.
* libgdb.texinfo: total rewrite from a different starting
premise.
Wed Oct 20 18:07:44 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
* stabs.texinfo (Local Variable Parameters): Re-write paragraph on
floats passed as doubles (to improve clarity).
Tue Oct 19 14:21:18 1993 Roland H. Pesch (pesch@fowanton.cygnus.com)
* gdb.texinfo (Source Path): index entries for $cwd, $pdir
* a4rc.sed: update to work with Andreas Vogel papersize params
* refcard.tex: use Andreas Vogel simplifications of papersize
params; remove useless version info; update copyright date.
Tue Oct 19 10:46:22 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
* gdb.texinfo (Symbols): Add class NAME to doc for ptype.
Tue Oct 12 09:11:45 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
* gdb.texinfo (Files): Say what address the load command loads it at.
* stabs.texinfo (Common Blocks): Minor cleanups.
* stabs.texinfo: Update ld stabs in elf relocation to reflect the fact
that Sun has backed away from the linker kludge and thus the relevant
issue is changes to the SunPRO tools, not the Solaris linker.
* stabs.texinfo (Traditional Integer Types): Clean up description
of octal bounds a little bit. Document extra leading zeroes.
Thu Oct 7 16:15:37 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
* gdb.texinfo (Signaling): Update for symbolic symbol names
and add a section explaining the difference between the GDB
signal command and the shell kill utility.
Wed Oct 6 13:23:01 1993 Tom Lord (lord@rtl.cygnus.com)
* libgdb.texinfo: added `@' to braces that were unescaped.
Mon Oct 4 10:42:18 1993 Tom Lord (lord@rtl.cygnus.com)
* libgdb.texinfo: new file. Spec for the gdb library.
Sun Oct 3 15:26:56 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
* stabs.texinfo (Include Files): Fix typo (start -> end).
Thu Sep 30 18:24:56 1993 Roland H. Pesch (pesch@fowanton.cygnus.com)
* gdb.texinfo, remote.texi: assorted small improvements, mostly
from Melissa at FSF's editing pass.
Thu Sep 30 11:54:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
* gdb.texinfo: Remove stuff about ar and 14 character filenames.
I believe this was fixed by the 13 Sep 89 change to print_frame_info.
Also, modern versions of ar like BSD 4.4 or SVR4 don't have this bug.
Wed Sep 22 21:22:11 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
* remote.texi (Bootstrapping): Discuss 386 call gates.
Sat Sep 18 17:10:44 1993 Jim Kingdon (kingdon@poseidon.cygnus.com)
* stabs.texinfo (Based Variables): New node.
Thu Sep 16 17:48:55 1993 Jim Kingdon (kingdon@cirdan.cygnus.com)
* stabs.texinfo (Negative Type Numbers): Re-write discussions of
names, sizes, and formats to suggest how not to lose.
Sat Sep 11 09:35:11 1993 Jim Kingdon (kingdon@poseidon.cygnus.com)
* stabs.texinfo (Methods): Fix typo.
Fri Sep 10 06:34:20 1993 David J. Mackenzie (djm@thepub.cygnus.com)
* gdb.texinfo: Fix a few typos.
Wed Sep 8 09:11:52 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
* gdb.texinfo: Clarify how well it works with Fortran.
* stabs.texinfo (Stabs In ELF, Statics, ELF Transformations):
More on relocating stabs in ELF files.
Tue Sep 7 13:45:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
* stabs.texinfo (Stabs In ELF): Talk about N_FUN value.
Mon Sep 6 19:23:18 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
* stabs.texinfo (Local Variable Parameters): Talk about nameless
parameters on VAX.
Fri Sep 3 17:06:08 1993 Roland H. Pesch (pesch@fowanton.cygnus.com)
* gdb.texinfo: @up/@down -> @raisesections/@lowersections
Fri Sep 3 12:04:15 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
* stabs.texinfo: Make info author notice match the TeX author notice.
Tue Aug 31 13:21:06 1993 David J. Mackenzie (djm@thepub.cygnus.com)
* stabs.texinfo: Initial-caps all words in node names and
non-trivial words in section names.
Mon Aug 30 11:13:16 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
* stabs.texinfo: Many minor cleanups.
* stabs.texinfo: Remove @deffn except from Expanded Reference node.
Sat Aug 28 12:08:09 1993 David J. MacKenzie (djm@edison.eng.umd.edu)
* stabs.texinfo: Remove full description of big example.
It's not really helpful; just use pieces of it where appropriate.
Add more Texinfo formatting directives (@samp, etc.).
Use @deffn to define stab types.
Eliminate some wordiness. Break up some nodes.
Add an (alphabetized) index of symbol types.
Use consistent capitalization style in node and section names.
Thu Aug 26 06:36:31 1993 Fred Fish (fnf@deneb.cygnus.com)
* gdb.texinfo: Change typo "Two two" to "The two".
Sun Aug 22 12:15:18 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
* stabs.texinfo (XCOFF-differences): Remove references to
non-existent types N_DECL and N_RPSYM.
* stabs.texinfo (String Field): Say that type attributes bug is
fixed in GDB 4.10, since it is.
* stabs.texinfo: Clean up djm cleanups, and more cleanups of my own.
Sat Aug 21 04:32:28 1993 David MacKenzie (djm@cygnus.com)
* stabs.texinfo: Formatting cleanups.
Fri Aug 20 20:49:53 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
* stabs.texinfo: When explaining the n_type of a stab, standardize
how we do it ('#' as a comment indicator, "36 is N_FUN" as text,
no tabs, use @r).
(Global Variables): Clean up.
Tue Aug 17 15:57:27 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
* stabs.texinfo (Stack Variables): Re-write.
Mon Aug 16 21:20:08 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
* stabs.texinfo (Stabs-in-elf): Talk about getting the start
addresses of a source file. Also revise formatting.
Change "object module" or "object file" to "source file".
Various: Miscellaneous cleanups.
Thu Aug 12 15:11:51 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
* stabs.texinfo: Point to mangling info in gcc's gpcompare.texi.
Tue Aug 10 16:57:49 1993 Stan Shebs (shebs@rtl.cygnus.com)
* gdbint.texinfo: Removed many nonsensical machine-collected
host and target conditionals, described some of the remainder.
Tue Aug 10 13:28:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
* gdbint.texinfo (Getting Started): Use @itemize, not @table.
* gdbint.texinfo (Top): Add name to @top line, and re-write the
paragraph which follows.
* gdbint.texinfo (Host): Use @code not @samp for Makefile
variables. Looks better and avoids overful hbox.
Fri Jul 30 18:26:21 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
* stabs.texinfo (Procedures): Improve stuff on nested functions.
Thu Jul 29 15:10:58 1993 Roland H. Pesch (pesch@fowanton.cygnus.com)
* remote.texi: (MIPS Remote) clearer doc for set/show timeout,
retransmit-timeout
Thu Jul 29 13:16:09 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
* gdbint.texinfo: Update statement about `some ancient Unix
systems, like Ultrix 4.0' to Ultrix 4.2.
Wed Jul 28 15:26:53 1993 Roland H. Pesch (pesch@el_bosque.cygnus.com)
* h8-cfg.texi, all-cfg.texi: new flag GDBSERVER
* Makefile.in: depend on remote.texi rather than gdbinv-s.texi
* remote.texi: (Server) New node on gdbserver. (Remote Serial,
ST2000 Remote, MIPS Remote): mention `host:port' syntax for TCP.
* remote.texi: new name for former gdbinv-s.texi
* gdb.texinfo: use remote.texi rather than gdbinv-s.texi
Wed Jul 28 08:26:24 1993 Ian Lance Taylor (ian@cygnus.com)
* gdbinv-s.texi: Documented timeout and retransmit-timeout
variables for MIPS remote debugging protocol.
Mon Jul 26 13:00:09 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
* stabs.texinfo (Negative Type Numbers): FORTRAN LOGICAL fix.
Tue Jul 20 16:30:41 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
* Makefile.in (refcard.dvi): Use srcdir where necessary.
Mon Jul 19 12:02:50 1993 Roland H. Pesch (pesch@cygnus.com)
* gdb.texinfo: repair conditional bugs in text markup
Fri Jul 16 18:57:50 1993 Roland H. Pesch (pesch@fowanton.cygnus.com)
* gdb.texinfo, all-cfg.texi, h8-cfg.texi: introduce MOD2 switch
to select Modula-2 material.
Thu Jul 15 13:15:01 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
* stabs.texinfo: Cleanups regarding statics.
* gdbinv-s.texi (Bootstrapping): Document exceptionHandler.
(Debug Session): Mention exceptionHandler. Add xref to Bootstrapping.
Mon Jul 12 13:37:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
* stabs.texinfo: N_MAIN is sometimes used for C.
Fri Jul 9 09:47:02 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
* gdbint.texinfo (Host, Target Conditionals): Remove TM_FILE_OVERRIDE.
Tue Jul 6 12:41:28 1993 John Gilmore (gnu@cygnus.com)
* gdbint.texinfo (Target Conditionals): Remove NO_TYPEDEFS,
removed from the code by Kingdon.
Tue Jul 6 12:24:34 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
* gdb.texinfo (Break Commands): Remove stuff about flushing terminal
input when evaluating breakpoint conditions; the bug has been fixed.
* gdb.texinfo (Continuing and Stepping): Argument to "continue"
sets the ignore count to N-1, not to N.
Thu Jul 1 14:57:42 1993 Roland H. Pesch (pesch@fowanton.cygnus.com)
* refcard.tex (\hoffset): correct longstanding error to match
intended offset; avoids cutting off edge on some printers
Wed Jun 30 18:23:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
* stabs.texinfo (Parameters): Say that order of stabs is significant.
Fri Jun 25 21:34:52 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
* stabs.texinfo (Common Blocks): Say what Sun FORTRAN does.
Fri Jun 25 16:15:10 1993 Roland H. Pesch (pesch@fowanton.cygnus.com)
* Makefile.in: (REFEDITS) new var to control whether PS or CM
fonts and whether US or A4 paper for GDB refcard; (refcard.dvi)
collect sed edits if any, apply to refcard before formatting;
(refcard.ps) stop implying PS fonts if PS output requested;
(lrefcard.ps) delete extra target for variant PS fonts
* refcard.tex: parametrize papersize dependent info, collect
in easily replaced spot
* a4rc.sed: new file, edits to refcard for A4 paper
Fri Jun 25 14:21:46 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
* stabs.texinfo (Negative Type Numbers): Type -16 is 4 bytes.
Wed Jun 23 15:02:50 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
* stabs.texinfo (Negative Type Numbers): Minor character cleanups.
Tue Jun 22 16:31:52 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
* stabs.texinfo: Express disapproval of 'D' symbol descriptor
politely rather than rudely.
Fri Jun 18 19:42:09 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
* stabs.texinfo: Document common blocks.
Fri Jun 18 12:12:57 1993 Fred Fish (fnf@cygnus.com)
* stabs.texinfo: Add some basic info about stabs-in-elf.
Fri Jun 18 13:57:09 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
* stabs.texinfo (Top): Minor cleanup.
Mon Jun 14 16:16:51 1993 david d `zoo' zuhn (zoo at rtl.cygnus.com)
* Makefile.in (install-info): remove parentdir support
Tue Jun 15 18:11:39 1993 Roland H. Pesch (pesch@fowanton.cygnus.com)
* gdb.texinfo (Copying): delete this node and references to it;
RMS says this manual need not carry GPL. (passim): Improvements
from last round at FSF, largely due to Ian Taylor review, and
minor formatting improvements.
* gdbinv-s.texi (passim): Improvements from last round at FSF,
largely due to Ian Taylor review. (Debug Session): minor edits to
new text.
Sun Jun 13 12:52:39 1993 Jim Kingdon (kingdon@cygnus.com)
* Makefile.in (realclean): Remove info and dvi files too.
Sat Jun 12 16:09:22 1993 Jim Kingdon (kingdon@cygnus.com)
* {all,h8}-config.texi: Rename to *-cfg.texi for 14 char filenames.
* Makefile.in: Change accordingly. gdb-config.texi -> gdb-cfg.texi.
* gdb.texinfo: Change accordingly.
* stabs.texinfo: Clean up N_{L,R}BRAC. Discuss what addresses of
N_{L,R}BRAC,N_SLINE are relative to.
Fri Jun 11 15:15:55 1993 Jim Kingdon (kingdon@cygnus.com)
* Makefile.in (GDBvn.texi): Update atomically.
Wed Jun 9 10:58:16 1993 Jim Kingdon (kingdon@cygnus.com)
* gdbinv-s.texi (Debug Session): Document exceptionHook.
Tue Jun 8 13:42:04 1993 Jim Kingdon (kingdon@cygnus.com)
* gdb.texinfo (Print Settings): Move all stuff relating to symbolic
addresses together. Also motivate the set print symbol-filename
command and suggest other solutions.
Tue Jun 1 22:46:43 1993 Fred Fish (fnf@cygnus.com)
* gdb.texinfo (set print elements): Note that the number of
elements is set to unlimited by "set print elements 0".
Mon May 31 08:06:55 1993 Jim Kingdon (kingdon@cygnus.com)
* stabs.texinfo (Builtin Type Descriptors): Try to clarify what
NF_LDOUBLE means.
(Stab Types): Include Solaris stab types.
(Procedures): Document Solaris extensions.
Thu May 27 06:20:42 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
* gdb.texinfo: Add `set print symbol-filename' doc.
Wed May 26 00:26:42 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
* stabs.texinfo (Arrays): Talk about type definition vs. type
information.
* stabs.texinfo (Builtin Type Descriptors): Talk about omitting
the trailing semicolon.
Tue May 25 14:49:42 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
* stabs.texinfo (Line Numbers, Source Files): Re-write these two nodes
and merge in other parts of the document addressing these subjects.
gdbint.texinfo (XCOFF): Remove info which is now in stabs.texinfo.
* stabs.texinfo (Subranges, Arrays): Try to explain about the semicolon
at the end of a range type.
* stabs.texinfo (Subranges): "A offset" and "T offset" are not
AIX extensions.
Mon May 24 09:00:33 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
* stabs.texinfo (Stabs Format): Misc fixes.
Sat May 22 10:40:56 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
* stabs.texinfo (Constants): Allow an `e' constant to be non-enum.
(Traditional builtin types): Document convex convention for long long.
(Negative builtin types): Discuss type names, and misc fixes.
Fri May 21 11:20:31 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
* stabs.texinfo (Builtin Type Descriptors): Document the floating
point types used with @samp{R} type descriptor.
(Symbol Descriptors): Describe how to handle conflict between
different meanings of @samp{P} symbol descriptor.
Thu May 20 13:35:10 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
* stabs.texinfo: Remove node Quick Reference and put its children
directly under the main menu.
* stabs.texinfo: Many more changes to bring it into line with
AIX documentation and reality. I think it now has all the
information from the AIX documentation, except that I burned
out when I got to variant records (Pascal and Modula-2) and
all the COBOL types. Oh well, we can add them later when we're
worrying more about those languages.
* stabs.texinfo (Automatic variables): Talk about what it means
to omit the symbol descriptor.
Tue May 18 17:59:18 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
* stabs.texinfo (Parameters): Add "(sometimes)" when describing
gcc2 behavior with promoted args.
Fri May 14 21:35:29 1993 Roland H. Pesch (pesch@fowanton.cygnus.com)
* gdb.texinfo: include readline appendices in info version of manual
Fri May 7 11:56:18 1993 Roland H. Pesch (pesch@fowanton.cygnus.com)
* gdbinv-s.texi (Remote Serial): describe new ^C behavior in
target remote.
* gdb.texinfo (Machine Code): more index entries for disassemble
Fri May 7 10:12:30 1993 Fred Fish (fnf@cygnus.com)
* Clarify the intended use of the gdb-testers and gdb-patches
mailing lists, and shrink gzip comment.
Thu May 6 16:39:50 1993 Roland H. Pesch (pesch@fowanton.cygnus.com)
* gdb.texinfo (Shell Commands): do not mention SHELL env var in
DOSHOST configuration of manual.
* gdb.texinfo (MIPS Stack): new node.
* all-config.texi (MIPS) new switch.
* gdbinv-s.texi (Nindy Options) Remove two instances of future
tense; (MIPS Remote) new node.
* gdb.texinfo (passim) rephrases to work around makeinfo @value
bug; (Environment) less passive, other small cleanups in text about
.cshrc/.bashrc; (Invoking GDB) new MIPS Remote menu entry;
(Remote) new MIPS Remote menu entry.
Thu Apr 29 09:36:25 1993 Jim Kingdon (kingdon@cygnus.com)
* stabs.texinfo: Many changes to include information from the
AIX documentation.
* gdb.texinfo (Environment): Mention pitfall with .cshrc.
Tue Apr 27 14:02:57 1993 Jim Kingdon (kingdon@cygnus.com)
* gdbint.texinfo (new node Debugging GDB, elsewhere):
Move a bunch of information from ../README.
(Getting Started): New node.
Fri Apr 23 17:21:13 1993 Roland H. Pesch (pesch@fowanton.cygnus.com)
* gdbinv-s.texi, gdb.texinfo: include Hitachi SH target
* gdb.texinfo: advance manual revision dates to present
* gdbinv-s.texi, gdb.texinfo, all-config.texi, h8-config.texi:
stop using silly Roman numerals in @set variable names
Fri Apr 23 07:30:01 1993 Jim Kingdon (kingdon@cygnus.com)
* stabs.texinfo (Parameters): Keep trying to get this right.
Wed Apr 21 15:18:47 1993 Jim Kingdon (kingdon@cygnus.com)
* stabs.texinfo (Parameters): More on "local parameters".
Mon Apr 19 08:00:51 1993 Jim Kingdon (kingdon@cygnus.com)
* stabs.texinfo (Parameters): Re-do "local parameters" section.
Sun Apr 18 09:47:45 1993 Jim Kingdon (kingdon@cygnus.com)
* stabs.texinfo (Symbol descriptors): Re-do using @table and @xref.
(Parameters): Rewrite.
(xcoff-differences, Sun-differences): Minor changes.
Thu Apr 15 02:35:24 1993 John Gilmore (gnu@cacophony.cygnus.com)
* stabs.texinfo: Minor cleanup.
Wed Apr 14 17:31:00 1993 Jim Kingdon (kingdon@cygnus.com)
* gdbint.texinfo: Minor xcoff stuff.
Wed Apr 7 14:11:07 1993 Fred Fish (fnf@cygnus.com)
* gdbint.texinfo: Update for new config directory structure.
Add info about internal type data structures.
Mon Apr 5 09:06:30 1993 Ian Lance Taylor (ian@cygnus.com)
* Makefile.in (SFILES_INCLUDED): gdb-config.texi is no longer in
$(srcdir).
(gdb-config.texi): Depend on file in $(srcdir).
Fri Apr 2 16:55:13 1993 Jim Kingdon (kingdon@cygnus.com)
* stabs.texinfo: Fixes about N_SO.
Fri Mar 26 18:00:35 1993 Roland H. Pesch (pesch@fowanton.cygnus.com)
* gdb.texinfo: include list of nonstandard init file names
* *-config.texi: new switch GENERIC for text that applies *only*
to (usual) multiple-target version of manual
* gdb.texinfo, gdbinv-s.texi: Update conditional markup to correct
h8 config
* gdb.texinfo: depend on latest fixed makeinfo, use conditionals
in menus (rather than conditionally selected multiple alternative
menus).
* Makefile.in: define and use DOC_CONFIG var to select
configuration for GDB user manual.
* gdb-config.texi: delete from repository, generate from Makefile.
* all-config.texi: normal `generic' configuration file, formerly
stored as gdb-config.texi
Wed Mar 24 14:03:19 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
* Makefile.in: add dvi target to build all .dvi files
Tue Mar 23 16:03:24 1993 Roland H. Pesch (pesch@fowanton.cygnus.com)
* gdb.texinfo, gdvinv-s.texinfo: formatting improvements.
Fri Mar 19 21:46:50 1993 John Gilmore (gnu@cygnus.com)
* gdbint.texinfo: Doc NO_MMALLOC and NO_MMALLOC_CHECK as
host conditionals.
* stabs.texinfo: More array fixes inspired by Jim's.
Fri Mar 19 10:23:34 1993 Jim Kingdon (kingdon@cygnus.com)
* stabs.texinfo: Fixes re arrays and continuations.
* gdbint.texinfo: Add XCOFF node.
Mon Mar 8 15:52:18 1993 John Gilmore (gnu@cygnus.com)
* gdb.texinfo: Add `set print max-symbolic-offset' doc.
Sun Feb 21 17:09:38 1993 Per Bothner (bothner@rtl.cygnus.com)
* stabs.texinfo: Fix for array types to mention lower bounds.
Thu Feb 18 01:19:49 1993 John Gilmore (gnu@cygnus.com)
* gdbint.texinfo: Update PTRACE_ARG3_TYPE doc, pull PT_*.
Wed Feb 17 08:15:24 1993 John Gilmore (gnu@cygnus.com)
* gdbint.texinfo: Remove SET_STACK_LIMIT_HUGE from target defines.
Thu Feb 11 10:38:40 1993 John Gilmore (gnu@cygnus.com)
* gdbint.texinfo: Fix thinko (NM_FILE => NAT_FILE). Found
by Michael Ben-Gershon <mybg@CS.HUJI.AC.IL>.
Wed Feb 10 23:59:19 1993 John Gilmore (gnu@cygnus.com)
* gdbint.texinfo: Eliminate IBM6000_HOST, document IBM6000_TARGET.
Tue Feb 9 18:26:21 1993 Roland H. Pesch (pesch@fowanton.cygnus.com)
* gdb.texinfo, gdbinv-s.texi: misc updates
Sat Feb 6 10:25:47 1993 John Gilmore (gnu@cygnus.com)
* gdbint.texinfo: Brief documentation for longjmp support,
from an email msg by Stu.
Fri Feb 5 14:10:15 1993 John Gilmore (gnu@cygnus.com)
* stabs.texinfo: Fix description of floating point "range"
types (which really define basic types). Reported by Jim Meehan,
<meehan@src.dec.com>.
* gdbint.texinfo: Remove COFF_NO_LONG_FILE_NAMES define, now gone.
Thu Feb 4 13:56:46 1993 Ian Lance Taylor (ian@cygnus.com)
* gdbint.texinfo: Slightly expand section on supporting a new
object file format.
Thu Feb 4 01:49:04 1993 John Gilmore (gnu@cygnus.com)
* Makefile.in (refcard.ps, lrefcard.ps): Remove psref.tex
intermediate file.
Tue Feb 2 12:18:06 1993 Roland H. Pesch (pesch@fowanton.cygnus.com)
* gdb.texinfo, gdbinv-s.texi: miscellaneous stylistic cleanups
Mon Feb 1 15:35:47 1993 Roland H. Pesch (pesch@fowanton.cygnus.com)
* gdbinv-s.texi: z8000 simulator target name is just "sim"
* gdbinv-s.texi: Mention that Z8000 simulator can simulate Z8001
as well as Z8002.
Sat Nov 28 06:51:35 1992 John Gilmore (gnu@cygnus.com)
* gdbint.texinfo: Add sections on clean design and on how to send
in changes.
Mon Nov 9 23:57:02 1992 John Gilmore (gnu@cygnus.com)
* gdbint.texinfo: Add how to declare the result of make_cleanup.
Mon Oct 26 11:09:47 1992 John Gilmore (gnu@cygnus.com)
* gdb.texinfo: Fix typo, reported by Karl Berry.
Fri Oct 23 00:41:21 1992 John Gilmore (gnu@cygnus.com)
* gdb.texinfo: Add opcodes dir to GDB distribution description.
Sat Oct 10 18:04:58 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
* gdbint.texinfo: fixed a stray email address (needs @@),
added @table @code to node "Native Conditionals"
Tue Sep 22 00:34:15 1992 John Gilmore (gnu@cygnus.com)
* gdbint.texinfo: Describe coding style of GDB.
Mon Sep 21 19:32:16 1992 John Gilmore (gnu@cygnus.com)
* stabs.texinfo: Minor wording changes.
Tue Sep 15 02:57:09 1992 John Gilmore (gnu@cygnus.com)
* gdbint.texinfo: Improve release doc slightly.
Fri Sep 11 01:34:25 1992 John Gilmore (gnu@sphagnum.cygnus.com)
* gdbint.texinfo: Improve doc of GDB config macros.
Wed Sep 9 16:52:06 1992 John Gilmore (gnu@cygnus.com)
* stabs.texinfo: Remove Bothner's changes for C++ nested types.
These will be reinserted when examined.
Mon Aug 24 01:17:55 1992 John Gilmore (gnu@cygnus.com)
* gdbint.texinfo: Make a start at documenting all the #if macros
in GDB. At least list them all, and start separating them into
host-specific and target-specific.
Tue Aug 18 15:59:13 1992 Roland H. Pesch (pesch@fowanton.cygnus.com)
* gdbinv-s.m4.in: refrain from using @cartouche for just a few
examples (not consistent w others).
gdb.texinfo: issue disclaimer paragraph on cmdline options only
for generic vn of doc
Tue Aug 18 14:53:27 1992 Ian Lance Taylor (ian@cygnus.com)
* Makefile.in: always create installation directories.
Tue Aug 18 14:11:50 1992 Roland H. Pesch (pesch@fowanton.cygnus.com)
* gdb.texinfo: in h8 config, do not describe searching commands.
Mon Aug 17 18:07:59 1992 Roland H. Pesch (pesch@fowanton.cygnus.com)
* gdb.texinfo, none.m4, h8.m4, gdbinv-s.m4.in: improve H8/300
conditionals; introduce a few generic switches that may be
useful for other cross-dev or dos-hosted configs.
* gdb.texinfo: fix typo in "info reg" description
Sun Aug 16 01:16:18 1992 John Gilmore (gnu@cygnus.com)
* stabs.texinfo: Minor updates from running TeX over it.
* Makefile.in (stabs.dvi, stabs.ps): Add.
Sat Aug 15 20:52:24 1992 Per Bothner (bothner@rtl.cygnus.com)
* stabs.texinfo: Stabs documentation, written by Julia Menapace.
First pass at converting it to texinfo.
Sat Aug 15 03:14:59 1992 John Gilmore (gnu@cygnus.com)
* gdb.texinfo, refcard.tex: Document mult args on `info reg'.
* Makefile.in (refcard.ps, lrefcard.ps): Add missing $(srdir).
Fri Aug 14 21:08:47 1992 John Gilmore (gnu@cygnus.com)
* gdbint.texinfo: Add section on partial symbol tables.
Sat Jun 20 16:31:10 1992 John Gilmore (gnu at cygnus.com)
* gdb.texinfo: document `set remotedebug' and `set
rstack_high_address'.
Thu May 14 17:09:48 1992 Roland H. Pesch (pesch@fowanton.cygnus.com)
* gdb.texinfo: slight expansion of new text on reading info files
* gdbinv-s.m4.in: correct and expand info on cross-debugging
H8/300 from DOS.
Tue May 12 12:22:47 1992 John Gilmore (gnu at cygnus.com)
* gdb.texinfo: `info user' => `show user'. Noticed by David Taylor.
Mon May 11 19:06:27 1992 John Gilmore (gnu at cygnus.com)
* gdb.texinfo: Say how to read the `info' files.
Tue May 5 12:11:38 1992 K. Richard Pixley (rich@cygnus.com)
* Makefile.in: gm4 -> m4.
Fri Apr 10 17:50:43 1992 John Gilmore (gnu at rtl.cygnus.com)
* gdb.texinfo: Update for GDB-4.5. Move `Formatting
Documentation' ahead of `Installing GDB' to match README.
Update shared library doc, -readnow and -mapped, and directory
structure (add glob and mmalloc). Update configure doc.
Tue Mar 24 23:28:38 1992 K. Richard Pixley (rich@cygnus.com)
* Makefile.in: remove $(srcdir) from gdb.info rule.
Sat Mar 7 18:44:50 1992 K. Richard Pixley (rich@rtl.cygnus.com)
* Makefile.in: commented out gdb-all.texinfo rule. This is
temporary.
Wed Feb 26 18:04:40 1992 K. Richard Pixley (rich@cygnus.com)
* Makefile.in, configure.in: removed traces of namesubdir,
-subdirs, $(subdir), $(unsubdir), some rcs triggers. Forced
copyrights to '92, changed some from Cygnus to FSF.
Fri Dec 13 09:47:31 1991 John Gilmore (gnu at cygnus.com)
* gdb.texinfo: Improve how we ask for bug reports.
Tue Dec 10 04:07:21 1991 K. Richard Pixley (rich at rtl.cygnus.com)
* Makefile.in: infodir belongs in datadir.
Fri Dec 6 23:57:34 1991 K. Richard Pixley (rich at rtl.cygnus.com)
* Makefile.in: remove spaces following hyphens, bsd make can't
cope. install using INSTALL_DATA. added clean-info. added
standards.text support.
Thu Dec 5 22:46:12 1991 K. Richard Pixley (rich at rtl.cygnus.com)
* Makefile.in: idestdir and ddestdir go away. Added copyrights
and shift gpl to v2. Added ChangeLog if it didn't exist. docdir
and mandir now keyed off datadir by default.
Local Variables:
mode: indented-text
left-margin: 8
fill-column: 74
version-control: never
End: