darling-gdb/binutils/ChangeLog

2009-03-19  H.J. Lu  <hongjiu.lu@intel.com>

	* readelf.c (debug_apply_relocations): Check relocations
	against STT_SECTION symbol.

2009-03-18  H.J. Lu  <hongjiu.lu@intel.com>

	* readelf.c (debug_apply_relocations): Allow relocations
	against function symbols.

2009-03-18  Alan Modra  <amodra@bigpond.net.au>

	* sysdep.h: Include alloca-conf.h instead of config.h and remove
	existing #if's handling alloca.
	* Makefile.am: Run "make dep-am".
	* Makefile.in: Regenerate.

2009-03-14  Richard Sandiford  <r.sandiford@uk.ibm.com>

	* configure.tgt: Extend AIX 5 behavior to AIX 6 and above.
	* configure.in: Likewise.
	* configure: Regenerate.

2009-03-13  H.J. Lu  <hongjiu.lu@intel.com>

	PR binutils/9945
	* objcopy.c (copy_object): Clear HAS_RELOC when stripping all.

2009-03-11  Chris Demetriou  <cgd@google.com>

	* ar.c (deterministic): New global variable.
	(main): Recognize new 'D' option, which enables 'deterministic mode'.
	(usage): Document new 'D' option.
	(write_archive): Set BFD_DETERMINISTIC_OUTPUT in output archive's
	flags if deterministic mode was requested.
	* doc/binutils.texi (ar): Document deterministic mode ('D' option).

2009-03-09  H.J. Lu  <hongjiu.lu@intel.com>

	PR binutils/9933
	* objcopy.c (filter_symbols): Properly handle common symbols
	in relocatable file.

2009-03-06  Nick Clifton  <nickc@redhat.com>

	* po/es.po: Updated Spanish translation.

2009-03-05  Nick Clifton  <nickc@redhat.com>

	* objdump.c (disassemble_section): If the computed next offset is
	not beyond the current offset then just continue to the end.

2009-03-04  Tristan Gingold  <gingold@adacore.com>

	* MAINTAINERS: Add myself as VMS maintainer.

2009-03-03  Nick Clifton  <nickc@redhat.com>

	* readelf.c: Update formatting.

2009-03-03  Alan Modra  <amodra@bigpond.net.au>

	* Makefile.am: Run "make dep-am".
	* Makefile.in: Regenerate.

2009-03-03  Alan Modra  <amodra@bigpond.net.au>

	* objdump.c (disassemble_section): Mask address before sign extending.

2009-03-02  Sebastian Biallas  <sb@biallas.net>

	* ieee.c (parse_ieee_ty): Add support for undocumented 'v' type.
	(parse_ieee_bb): Set the filename if it has not already been
	discovered.

2009-03-02  Cary Coutant  <ccoutant@google.com>

	* readelf.c (adjust_relative_path): New function.
	(struct archive_info): New type.
	(setup_archive): New function.
	(release_archive): New function.
	(setup_nested_archive): New function.
	(get_archive_member_name): New function.
	(get_archive_member_name_at): New function.
	(make_qualified_name): New function.
	(process_archive): Factor out code for reading archive index and
	long filename table to setup_archive.  Add support for thin archives.

2009-03-02  Nick Clifton  <nickc@redhat.com>

	* po/sk.po: Updated Slovak translation.

2009-03-01  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>

	* configure: Regenerate.

2009-02-23  Cary Coutant <ccoutant@google.com>

	* objdump.c (load_specific_debug_section): New function, from
	load_debug_section.
	(load_debug_section): Use load_specific_debug_section.
	(dump_dwarf_section): Likewise.

2009-02-23  Cary Coutant <ccoutant@google.com>

	* readelf.c (parse_args): Select all sections explicitly for -w.

2009-02-09  Kai Tietz  <kai.tietz@onevision.com>

	* windres.c (set_endianess): Copy name without leading '-'.

2009-02-09  Tristan Gingold  <gingold@adacore.com>

	* NEWS: Mention feature match between objdump and readelf for dumping
	dwarf info.

	* doc/binutils.texi (objdump): Document -W/--dwarf improvments to
	objdump.

	* objdump.c (usage): Update documentation for -W/--dwarf.
	(enum option_values): Add OPTION_DWARF.
	(long_options): --dwarf can accept arguments.
	(dump_dwarf_section): Also check enabled field.
	(main): Option -W can accept arguments, code moved to
	dwarf.c and call dwarf_select_sections_all instead.
	* readelf.c (process_section_headers): Remove do_debug_lines_decoded.
	(parse_args): Move code to...
	* dwarf.c (dwarf_select_sections_by_letters,
	dwarf_select_sections_by_names): : ...here (new functions).
	(do_debug_lines_decoded): Remove and replaced by ...
	(FLAG_DEBUG_LINES_RAW, FLAG_DEBUG_LINES_DECODED): ... new macros.
	(display_debug_lines): Adjust for previous change.
	(dwarf_select_sections_all): New function.
	(debug_displays): Add initializer for enabled field.
	* dwarf.h (do_debug_lines_decoded): Remove.
	Add prototypes for the new functions.
	(struct dwarf_section_display): Add enabled field.

2009-02-06  Nick Clifton  <nickc@redhat.com>

	* po/vi.po: Updated Vietnamese translation.

2009-02-03  Sandip Matte  <sandip@rmicorp.com>

	* readelf.c (get_machine_flags): Handle E_MIPS_MACH_XLR.

2009-02-03  H.J. Lu  <hongjiu.lu@intel.com>

	* NEWS: Move --as-needed change to ...
	* ../ld/NEWS: Here.

2009-02-03  Carlos O'Donell  <carlos@codesourcery.com>

	* configure.in: AC_SUBST pdfdir.
	* Makefile.am: Add install-pdf, install-pdf-am,
	and install-pdf-recursive targets.
	* doc/Makefile.am: Define pdf__strip_dir. Add
	install-pdf and install-pdf-am targets.
	* po/Make-in: Add install-pdf target.
	* configure: Regenerate.
	* Makefile.in: Regenerate.
	* doc/Makefile.in: Regenerate.

2009-02-03  H.J. Lu  <hongjiu.lu@intel.com>

	PR binutils/9784
	* NEWS: Mention --prefix=PREFIX and --prefix-strip=LEVEL.

	* doc/binutils.texi: Document --prefix=PREFIX and
	--prefix-strip=LEVEL.

	* objdump.c: Include "filenames.h".
	(prefix): New.
	(prefix_strip): Likewise.
	(prefix_length): Likewise.
	(usage): Add --prefix=PREFIX and --prefix-strip=LEVEL.
	(option_values): Add OPTION_PREFIX and OPTION_PREFIX_STRIP.
	(long_options): Likewise.
	(show_line): Handle prefix and prefix_strip.
	(main): Handle OPTION_PREFIX and OPTION_PREFIX_STRIP.

	* readelf.c (PATH_MAX): Moved to ...
	* sysdep.h: Here.

2009-01-31  Alan Modra  <amodra@bigpond.net.au>

	* NEWS: Mention --as-needed change.

2009-01-29  Alan Modra  <amodra@bigpond.net.au>

	PR 9798
	* bucomm.c (bfd_nonfatal_message): Use bfd_get_archive_filename.
	(bfd_get_archive_filename): Constify param.
	* bucomm.h (bfd_get_archive_filename): Update prototype.
	* objcopy.c (RETURN_NONFATAL): Delete.
	(copy_unknown_object): Don't call bfd_get_archive_filename for
	bfd_nonfatal_message filename, instead just pass bfd.
	(copy_object): Likewise.
	(copy_archive, copy_file): Likewise.  Expand RETURN_NONFATAL.  On
	bfd_close errors, do not pass the bfd to bfd_nonfatal_message.
	(setup_bfd_headers): Fix error message.

2009-01-27  Nick Clifton  <nickc@redhat.com>

	PR 9774
	* objdump.c (disassemble_section): When the target uses signed
	addresses make sure that we compute signed values.

2009-01-27  Nick Clifton  <nickc@redhat.com>

	* MAINTAINERS: Remove Thiemo Seufer's name from the list of MIPS
	maintainers.

2009-01-26  Nick Clifton  <nickc@redhat.com>

	PR 9766
	* dlltool.c (xlate): When strip text after the @ sign, look for
	the last one not the first one.

2009-01-16  Alan Modra  <amodra@bigpond.net.au>

	* configure.in (commonbfdlib): Delete.
	* configure: Regenerate.

2008-01-14  Charles Wilson  <cygwin@cwilson.fastmail.fm>

	Cleanup code related to --identify option.

	* binutils/dlltool.c (file scope): Removed globals identify_ms,
	identify_member_contains_symname_result,
	identify_dll_name_list_head, and identify_dll_name_list_tail.
	Renamed existing typedef dll_name_list_type to
	dll_name_list_node_type.
	Added new typedefs dll_name_list_type, symname_search_data_type,
	and identify_data_type.
	(identify_append_dll_name_to_list): Renamed to...
	(dll_name_list_append): ...here.  Changed signature to accept list
	argument rather than use global.
	(identify_count_dll_name_list): Renamed to...
	(dll_name_list_count): ...here.  Changed signature to accept list
	argument rather than use global.
	(identify_print_dll_name_list): Renamed to...
	(dll_name_list_print): ...here.  Changed signature to accept list
	argument rather than use global.
	(identify_free_dll_name_list): Renamed to...
	(dll_name_list_free_contents): ...here.
	(dll_name_list_free): New function.
	(dll_name_list_create): New function.
	(identify_process_section_p): Changed signature to accept
	ms_style_implib argument rather than use global.
	(identify_member_contains_symname): Expect incoming void * data to
	be symname_search_data_type.
	(identify_dll_for_implib): Use new functions dll_name_list_create
	and dll_name_list_free.  Use new types symname_search_data_type
	and identify_data_type to communicate with search routines.
	(identify_search_section): Expect incoming void * data to be
	identify_data_type. Use its contents rather than global
	variables.

2009-01-13  Charles Wilson  <cygwin@cwilson.fastmail.fm>

	Add --identify-strict option.  Handle ms-style implibs:

	* dlltool.c (file scope): Added new globals identify_ms and
	identify_strict. New typedef dll_name_list_type, and globals
	identify_dll_name_list_head and identify_dll_name_list_tail. Added
	new global identify_member_contains_symname_result.
	(identify_append_dll_name_to_list): New function.
	(identify_count_dll_name_list): New function.
	(identify_print_dll_name_list): New function.
	(identify_free_dll_name_list): New function.
	(identify_search_archive): Changed signature to take function
	pointer to operation to apply to each member, and data to pass on
	to that function.
	(identify_search_member): Changed signature to accept user data
	from caller.
	(identify_member_contains_symname): New function.
	(identify_dll_for_implib): Rewrite. Now determines whether implib
	is ms- or binutils- style, before searching sections for
	dllname. Allows multiple dllnames.
	(identify_process_section_p): Search alternate section for dllname
	when implib is ms-style.
	(identify_search_section): Add additional conditions to excludes
	candidate sections from consideration.
	(usage): Added --identify-strict.
	(long_options): Added --identify-strict.
	(main): Handle --identify-strict option.
	* doc/binutils.texi: Document --identify-strict	option.
	* NEWS: Document --identify and	--identify-strict options.

2009-01-13  Alan Modra  <amodra@bigpond.net.au>

	PR 7034
	* doc/binutils.texi (objdump -R): Note effect of -d or -D.

2009-01-13  Alan Modra  <amodra@bigpond.net.au>

	* objdump.c (disassemble_section): Don't assume non-instruction
	data if object symbol at given address is in different section.

2009-01-12  Kai Tietz  <kai.tietz@onevision.com>

	* dlltool.c (create_for_pep): New.
	(flush_page): Use create_for_pep instead of using
	macro DLLTOOL_MX86_64 clause.
	(generate_idata_ofile): Likewise.
	(make_one_lib_file): Likewise.
	(make_head): Likewise.
	(make_tail): Likewise.
	(main): Initialize create_for_pep.

2009-01-08  Kai Tietz  <kai.tietz@onevision.com>

	* dlltool.c (use_nul_prefixed_import_tables): New.
	(make_head): Make prefix leading zero prefix element for
	idata$4 and idata$5 dependent to new flag.
	(usage): Add new option  --use-nul-prefixed-import-tables.
	(OPTION_USE_NUL_PREFIXED_IMPORT_TABLES): New.
	(long_options): Add --use-nul-prefixed-import-tables.
	(main): Likewise.
	* doc/binutils.texi: Add new option documentation for
	--use-nul-prefixed-import-tables.
	* NEWS: Add new option.

2009-01-06  Kai Tietz  <kai.tietz@onevision.com>

	* windres.c (set_endianess): Get architecture name
	for internal target names like "pe-arm-wince-little".
	(find_arch_match): New helper.
	* ChangeLog: Reset it.
	* ChangeLog-2008: Moved old ChangeLog.

For older changes see ChangeLog-2008

Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
End: