Initial revision

readline/INSTALL

@@ -0,0 +1,176 @@
+Basic Installation
+==================
+
+   These are generic installation instructions.
+
+   The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation.  It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions.  Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, a file
+`config.cache' that saves the results of its tests to speed up
+reconfiguring, and a file `config.log' containing compiler output
+(useful mainly for debugging `configure').
+
+   If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release.  If at some point `config.cache'
+contains results you don't want to keep, you may remove or edit it.
+
+   The file `configure.in' is used to create `configure' by a program
+called `autoconf'.  You only need `configure.in' if you want to change
+it or regenerate `configure' using a newer version of `autoconf'.
+
+The simplest way to compile this package is:
+
+  1. `cd' to the directory containing the package's source code and type
+     `./configure' to configure the package for your system.  If you're
+     using `csh' on an old version of System V, you might need to type
+     `sh ./configure' instead to prevent `csh' from trying to execute
+     `configure' itself.
+
+     Running `configure' takes awhile.  While running, it prints some
+     messages telling which features it is checking for.
+
+  2. Type `make' to compile the package.
+
+  3. Optionally, type `make check' to run any self-tests that come with
+     the package.
+
+  4. Type `make install' to install the programs and any data files and
+     documentation.
+
+  5. You can remove the program binaries and object files from the
+     source code directory by typing `make clean'.  To also remove the
+     files that `configure' created (so you can compile the package for
+     a different kind of computer), type `make distclean'.  There is
+     also a `make maintainer-clean' target, but that is intended mainly
+     for the package's developers.  If you use it, you may have to get
+     all sorts of other programs in order to regenerate files that came
+     with the distribution.
+
+Compilers and Options
+=====================
+
+   Some systems require unusual options for compilation or linking that
+the `configure' script does not know about.  You can give `configure'
+initial values for variables by setting them in the environment.  Using
+a Bourne-compatible shell, you can do that on the command line like
+this:
+     CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
+
+Or on systems that have the `env' program, you can do it like this:
+     env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
+
+Compiling For Multiple Architectures
+====================================
+
+   You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory.  To do this, you must use a version of `make' that
+supports the `VPATH' variable, such as GNU `make'.  `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script.  `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'.
+
+   If you have to use a `make' that does not supports the `VPATH'
+variable, you have to compile the package for one architecture at a time
+in the source code directory.  After you have installed the package for
+one architecture, use `make distclean' before reconfiguring for another
+architecture.
+
+Installation Names
+==================
+
+   By default, `make install' will install the package's files in
+`/usr/local/bin', `/usr/local/man', etc.  You can specify an
+installation prefix other than `/usr/local' by giving `configure' the
+option `--prefix=PATH'.
+
+   You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files.  If you
+give `configure' the option `--exec-prefix=PATH', the package will use
+PATH as the prefix for installing programs and libraries.
+Documentation and other data files will still use the regular prefix.
+
+   If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+Optional Features
+=================
+
+   Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System).  The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+   For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+Specifying the System Type
+==========================
+
+   There may be some features `configure' can not figure out
+automatically, but needs to determine by the type of host the package
+will run on.  Usually `configure' can figure that out, but if it prints
+a message saying it can not guess the host type, give it the
+`--host=TYPE' option.  TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name with three fields:
+     CPU-COMPANY-SYSTEM
+
+See the file `config.sub' for the possible values of each field.  If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the host type.
+
+   If you are building compiler tools for cross-compiling, you can also
+use the `--target=TYPE' option to select the type of system they will
+produce code for and the `--build=TYPE' option to select the type of
+system on which you are compiling the package.
+
+Sharing Defaults
+================
+
+   If you want to set default values for `configure' scripts to share,
+you can create a site shell script called `config.site' that gives
+default values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists.  Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Operation Controls
+==================
+
+   `configure' recognizes the following options to control how it
+operates.
+
+`--cache-file=FILE'
+     Use and save the results of the tests in FILE instead of
+     `./config.cache'.  Set FILE to `/dev/null' to disable caching, for
+     debugging `configure'.
+
+`--help'
+     Print a summary of the options to `configure', and exit.
+
+`--quiet'
+`--silent'
+`-q'
+     Do not print messages saying which checks are being made.
+
+`--srcdir=DIR'
+     Look for the package's source code in directory DIR.  Usually
+     `configure' can determine that directory automatically.
+
+`--version'
+     Print the version of Autoconf used to generate the `configure'
+     script, and exit.
+
+`configure' also accepts some other, not widely useful, options.
+

readline/config.h.in

@@ -0,0 +1,145 @@
+/* config.h.in.  Generated automatically from configure.in by autoheader.  */
+
+/* Define if on MINIX.  */
+#undef _MINIX
+
+/* Define as the return type of signal handlers (int or void).  */
+#undef RETSIGTYPE
+
+/* Define if the `S_IS*' macros in <sys/stat.h> do not work properly.  */
+#undef STAT_MACROS_BROKEN
+
+#undef VOID_SIGHANDLER
+
+/* Define if you have the lstat function. */
+#undef HAVE_LSTAT
+
+/* Define if you have the putenv function.  */
+#undef HAVE_PUTENV
+
+/* Define if you have the select function.  */
+#undef HAVE_SELECT
+
+/* Define if you have the setenv function.  */
+#undef HAVE_SETENV
+
+/* Define if you have the strcasecmp function.  */
+#undef HAVE_STRCASECMP
+
+/* Define if you have the setlocale function. */
+#undef HAVE_SETLOCALE
+
+/* Define if you have the tcgetattr function.  */
+#undef HAVE_TCGETATTR
+
+/* Define if you have the strcoll function.  */
+#undef HAVE_STRCOLL
+
+#undef STRCOLL_BROKEN
+
+/* Define if you have the <dirent.h> header file.  */
+#undef HAVE_DIRENT_H
+
+/* Define if you have the <ndir.h> header file.  */
+#undef HAVE_NDIR_H
+
+/* Define if you have the <stdlib.h> header file.  */
+#undef HAVE_STDLIB_H
+
+/* Define if you have the <string.h> header file.  */
+#undef HAVE_STRING_H
+
+/* Define if you have the <sys/dir.h> header file.  */
+#undef HAVE_SYS_DIR_H
+
+/* Define if you have the <sys/file.h> header file.  */
+#undef HAVE_SYS_FILE_H
+
+/* Define if you have the <sys/ndir.h> header file.  */
+#undef HAVE_SYS_NDIR_H
+
+/* Define if you have the <sys/pte.h> header file.  */
+#undef HAVE_SYS_PTE_H
+
+/* Define if you have the <sys/ptem.h> header file.  */
+#undef HAVE_SYS_PTEM_H
+
+/* Define if you have the <sys/select.h> header file.  */
+#undef HAVE_SYS_SELECT_H
+
+/* Define if you have the <sys/stream.h> header file.  */
+#undef HAVE_SYS_STREAM_H
+
+/* Define if you have the <termcap.h> header file.  */
+#undef HAVE_TERMCAP_H
+
+/* Define if you have the <termio.h> header file.  */
+#undef HAVE_TERMIO_H
+
+/* Define if you have the <termios.h> header file.  */
+#undef HAVE_TERMIOS_H
+
+/* Define if you have the <unistd.h> header file.  */
+#undef HAVE_UNISTD_H
+
+/* Define if you have the <varargs.h> header file.  */
+#undef HAVE_VARARGS_H
+
+/* Define if you have the <stdarg.h> header file.  */
+#undef HAVE_STDARG_H
+
+#undef HAVE_LOCALE_H
+
+/* Definitions pulled in from aclocal.m4. */
+#undef VOID_SIGHANDLER
+
+#undef GWINSZ_IN_SYS_IOCTL
+
+#undef STRUCT_WINSIZE_IN_SYS_IOCTL
+
+#undef STRUCT_WINSIZE_IN_TERMIOS
+
+#undef TIOCSTAT_IN_SYS_IOCTL
+
+#undef FIONREAD_IN_SYS_IOCTL
+
+#undef SPEED_T_IN_SYS_TYPES
+
+#undef HAVE_GETPW_DECLS
+
+#undef STRUCT_DIRENT_HAS_D_INO
+
+#undef STRUCT_DIRENT_HAS_D_FILENO
+
+#undef HAVE_BSD_SIGNALS
+
+#undef HAVE_POSIX_SIGNALS
+
+#undef HAVE_USG_SIGHOLD
+
+#undef MUST_REINSTALL_SIGHANDLERS
+
+#undef HAVE_POSIX_SIGSETJMP
+
+/* config.h.bot */
+/* modify settings or make new ones based on what autoconf tells us. */
+
+/* Ultrix botches type-ahead when switching from canonical to
+   non-canonical mode, at least through version 4.3 */
+#if !defined (HAVE_TERMIOS_H) || !defined (HAVE_TCGETATTR) || defined (ultrix)
+#  define TERMIOS_MISSING
+#endif
+
+#if defined (STRCOLL_BROKEN)
+#  undef HAVE_STRCOLL
+#endif
+
+#if defined (__STDC__) && defined (HAVE_STDARG_H)
+#  define PREFER_STDARG
+#  define USE_VARARGS
+#else
+#  if defined (HAVE_VARARGS_H)
+#    define PREFER_VARARGS
+#    define USE_VARARGS
+#  endif
+#endif

readline/examples/histexamp.c

@@ -0,0 +1,82 @@
+main ()
+{
+  char line[1024], *t;
+  int len, done = 0;
+
+  line[0] = 0;
+
+  using_history ();
+  while (!done)
+    {
+      printf ("history$ ");
+      fflush (stdout);
+      t = fgets (line, sizeof (line) - 1, stdin);
+      if (t && *t)
+        {
+          len = strlen (t);
+          if (t[len - 1] == '\n')
+            t[len - 1] = '\0';
+        }
+
+      if (!t)
+        strcpy (line, "quit");
+
+      if (line[0])
+        {
+          char *expansion;
+          int result;
+
+          using_history ();
+
+          result = history_expand (line, &expansion);
+          if (result)
+            fprintf (stderr, "%s\n", expansion);
+
+          if (result < 0 || result == 2)
+            {
+              free (expansion);
+              continue;
+            }
+
+          add_history (expansion);
+          strncpy (line, expansion, sizeof (line) - 1);
+          free (expansion);
+        }
+
+      if (strcmp (line, "quit") == 0)
+        done = 1;
+      else if (strcmp (line, "save") == 0)
+        write_history ("history_file");
+      else if (strcmp (line, "read") == 0)
+        read_history ("history_file");
+      else if (strcmp (line, "list") == 0)
+        {
+          register HIST_ENTRY **the_list;
+          register int i;
+
+          the_list = history_list ();
+          if (the_list)
+            for (i = 0; the_list[i]; i++)
+              printf ("%d: %s\n", i + history_base, the_list[i]->line);
+        }
+      else if (strncmp (line, "delete", 6) == 0)
+        {
+          int which;
+          if ((sscanf (line + 6, "%d", &which)) == 1)
+            {
+              HIST_ENTRY *entry = remove_history (which);
+              if (!entry)
+                fprintf (stderr, "No such entry %d\n", which);
+              else
+                {
+                  free (entry->line);
+                  free (entry);
+                }
+            }
+          else
+            {
+              fprintf (stderr, "non-numeric arg given to `delete'\n");
+            }
+        }
+    }
+}

readline/shell.c

@@ -0,0 +1,138 @@
+/* shell.c -- readline utility functions that are normally provided by
+	      bash when readline is linked as part of the shell. */
+
+/* Copyright (C) 1997 Free Software Foundation, Inc.
+
+   This file is part of the GNU Readline Library, a library for
+   reading lines of text with interactive input and history editing.
+
+   The GNU Readline Library is free software; you can redistribute it
+   and/or modify it under the terms of the GNU General Public License
+   as published by the Free Software Foundation; either version 1, or
+   (at your option) any later version.
+
+   The GNU Readline Library is distributed in the hope that it will be
+   useful, but WITHOUT ANY WARRANTY; without even the implied warranty
+   of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   The GNU General Public License is often shipped with GNU software, and
+   is generally kept in a file called COPYING or LICENSE.  If you do not
+   have a copy of the license, write to the Free Software Foundation,
+   675 Mass Ave, Cambridge, MA 02139, USA. */
+#define READLINE_LIBRARY
+
+#if defined (HAVE_CONFIG_H)
+#  include <config.h>
+#endif
+
+#if defined (HAVE_UNISTD_H)
+#  ifdef _MINIX
+#    include <sys/types.h>
+#  endif
+#  include <unistd.h>
+#endif /* HAVE_UNISTD_H */
+
+#if defined (HAVE_STDLIB_H)
+#  include <stdlib.h>
+#else
+#  include "ansi_stdlib.h"
+#endif /* HAVE_STDLIB_H */
+
+#if defined (HAVE_STRING_H)
+#  include <string.h>
+#else
+#  include <strings.h>
+#endif /* !HAVE_STRING_H */
+
+extern char *xmalloc (), *xrealloc ();
+
+#if !defined (SHELL)
+
+#ifdef savestring
+#undef savestring
+#endif
+
+/* Backwards compatibility, now that savestring has been removed from
+   all `public' readline header files. */
+char *
+savestring (s)
+     char *s;
+{
+  return ((char *)strcpy (xmalloc (1 + (int)strlen (s)), (s)));
+}
+
+/* Does shell-like quoting using single quotes. */
+char *
+single_quote (string)
+     char *string;
+{
+  register int c;
+  char *result, *r, *s;
+
+  result = (char *)xmalloc (3 + (3 * strlen (string)));
+  r = result;
+  *r++ = '\'';
+
+  for (s = string; s && (c = *s); s++)
+    {
+      *r++ = c;
+
+      if (c == '\'')
+	{
+	  *r++ = '\\';	/* insert escaped single quote */
+	  *r++ = '\'';
+	  *r++ = '\'';	/* start new quoted string */
+	}
+    }
+
+  *r++ = '\'';
+  *r = '\0';
+
+  return (result);
+}
+
+/* Set the environment variables LINES and COLUMNS to lines and cols,
+   respectively. */
+void
+set_lines_and_columns (lines, cols)
+     int lines, cols;
+{
+  char *b;
+
+#if defined (HAVE_PUTENV)
+  b = xmalloc (24);
+  sprintf (b, "LINES=%d", lines);
+  putenv (b);
+  b = xmalloc (24);
+  sprintf (b, "COLUMNS=%d", cols);
+  putenv (b);
+#else /* !HAVE_PUTENV */
+#  if defined (HAVE_SETENV)
+  b = xmalloc (8);
+  sprintf (b, "%d", lines);
+  setenv ("LINES", b, 1);
+  b = xmalloc (8);
+  sprintf (b, "%d", cols);
+  setenv ("COLUMNS", b, 1);
+#  endif /* HAVE_SETENV */
+#endif /* !HAVE_PUTENV */
+}
+
+char *
+get_env_value (varname)
+     char *varname;
+{
+  return ((char *)getenv (varname));
+}
+
+#else /* SHELL */
+extern char *get_string_value ();
+
+char *
+get_env_value (varname)
+     char *varname;
+{
+  return get_string_value (varname);
+}	
+#endif /* SHELL */

readline/support/install.sh

@@ -0,0 +1,235 @@
+#!/bin/sh
+#
+# install - install a program, script, or datafile
+# This comes from X11R5.
+#
+# $XConsortium: install.sh,v 1.2 89/12/18 14:47:22 jim Exp $
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.
+#
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+tranformbasename=""
+transform_arg=""
+instcmd="$mvprog"
+chmodcmd="$chmodprog 0755"
+chowncmd=""
+chgrpcmd=""
+stripcmd=""
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=""
+dst=""
+dir_arg=""
+
+while [ x"$1" != x ]; do
+    case $1 in
+	-c) instcmd="$cpprog"
+	    shift
+	    continue;;
+
+	-d) dir_arg=true
+	    shift
+	    continue;;
+
+	-m) chmodcmd="$chmodprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-o) chowncmd="$chownprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-g) chgrpcmd="$chgrpprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-s) stripcmd="$stripprog"
+	    shift
+	    continue;;
+
+	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
+	    shift
+	    continue;;
+
+	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
+	    shift
+	    continue;;
+
+	*)  if [ x"$src" = x ]
+	    then
+		src=$1
+	    else
+		# this colon is to work around a 386BSD /bin/sh bug
+		:
+		dst=$1
+	    fi
+	    shift
+	    continue;;
+    esac
+done
+
+if [ x"$src" = x ]
+then
+	echo "install:	no input file specified"
+	exit 1
+else
+	true
+fi
+
+if [ x"$dir_arg" != x ]; then
+	dst=$src
+	src=""
+	
+	if [ -d $dst ]; then
+		instcmd=:
+	else
+		instcmd=mkdir
+	fi
+else
+
+# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
+# might cause directories to be created, which would be especially bad 
+# if $src (and thus $dsttmp) contains '*'.
+
+	if [ -f $src -o -d $src ]
+	then
+		true
+	else
+		echo "install:  $src does not exist"
+		exit 1
+	fi
+	
+	if [ x"$dst" = x ]
+	then
+		echo "install:	no destination specified"
+		exit 1
+	else
+		true
+	fi
+
+# If destination is a directory, append the input filename; if your system
+# does not like double slashes in filenames, you may need to add some logic
+
+	if [ -d $dst ]
+	then
+		dst="$dst"/`basename $src`
+	else
+		true
+	fi
+fi
+
+## this sed command emulates the dirname command
+dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+
+# Make sure that the destination directory exists.
+#  this part is taken from Noah Friedman's mkinstalldirs script
+
+# Skip lots of stat calls in the usual case.
+if [ ! -d "$dstdir" ]; then
+defaultIFS='	
+'
+IFS="${IFS-${defaultIFS}}"
+
+oIFS="${IFS}"
+# Some sh's can't handle IFS=/ for some reason.
+IFS='%'
+set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
+IFS="${oIFS}"
+
+pathcomp=''
+
+while [ $# -ne 0 ] ; do
+	pathcomp="${pathcomp}${1}"
+	shift
+
+	if [ ! -d "${pathcomp}" ] ;
+        then
+		$mkdirprog "${pathcomp}"
+	else
+		true
+	fi
+
+	pathcomp="${pathcomp}/"
+done
+fi
+
+if [ x"$dir_arg" != x ]
+then
+	$doit $instcmd $dst &&
+
+	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
+	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
+	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
+	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
+else
+
+# If we're going to rename the final executable, determine the name now.
+
+	if [ x"$transformarg" = x ] 
+	then
+		dstfile=`basename $dst`
+	else
+		dstfile=`basename $dst $transformbasename | 
+			sed $transformarg`$transformbasename
+	fi
+
+# don't allow the sed command to completely eliminate the filename
+
+	if [ x"$dstfile" = x ] 
+	then
+		dstfile=`basename $dst`
+	else
+		true
+	fi
+
+# Make a temp file name in the proper directory.
+
+	dsttmp=$dstdir/#inst.$$#
+
+# Move or copy the file name to the temp name
+
+	$doit $instcmd $src $dsttmp &&
+
+	trap "rm -f ${dsttmp}" 0 &&
+
+# and set any options; do chmod last to preserve setuid bits
+
+# If any of these fail, we abort the whole thing.  If we want to
+# ignore errors from any of these, just make sure not to ignore
+# errors from the above "$doit $instcmd $src $dsttmp" command.
+
+	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
+	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
+	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
+	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
+
+# Now rename the file to the real destination.
+
+	$doit $rmcmd -f $dstdir/$dstfile &&
+	$doit $mvcmd $dsttmp $dstdir/$dstfile 
+
+fi &&
+
+
+exit 0

readline/support/mkdirs

@@ -0,0 +1,32 @@
+#! /bin/sh
+#
+# mkdirs - a work-alike for `mkdir -p'
+#
+# Chet Ramey
+# chet@po.cwru.edu
+
+for dir
+do
+
+	test -d "$dir" && continue
+
+	tomake=$dir
+	while test -n "$dir" ; do
+		# dir=${dir%/*}
+		# dir=`expr "$dir" ':' '\(/.*\)/[^/]*'`
+		if dir=`expr "$dir" ':' '\(.*\)/[^/]*'`; then
+			tomake="$dir $tomake"
+		else
+			dir=
+		fi
+	done
+
+	for d in $tomake
+	do
+		test -d "$d" && continue
+		echo mkdir "$d"
+		mkdir "$d"
+	done
+done
+
+exit 0