* Support debugging using native MACH primitives on hppa*-*-osf*.

* configure.in: hppa*-*-osf* != hppa*-*-bsd* anymore.
	* config/pa/hppaosf.mh: New file.
	* config/pa/nm-hppao.h: Likewise.
	* hppam3-nat.c: Likewise.
	* config/pa/tm-hppao.h (PSW_SS): Define for single-stepping.
	(MACHINE_CPROC_*_OFFSET): Define.
	(TRACE_*): Define.
	(START_INFERIOR_TRAPS_EXPECTED): Delete definition.

gdb/.Sanitize

@@ -159,6 +159,7 @@ hp300ux-nat.c
 hppa-tdep.c
 hppab-nat.c
 hppah-nat.c
+hppam3-nat.c
 hpread.c
 i386-stub.c
 i386-tdep.c

gdb/ChangeLog

@@ -1,3 +1,15 @@
+Thu May 11 19:01:37 1995  Jeff Law  (law@snake.cs.utah.edu)
+
+	* Support debugging using native MACH primitives on hppa*-*-osf*.
+	* configure.in: hppa*-*-osf* != hppa*-*-bsd* anymore.
+	* config/pa/hppaosf.mh: New file.
+	* config/pa/nm-hppao.h: Likewise.
+	* hppam3-nat.c: Likewise.
+	* config/pa/tm-hppao.h (PSW_SS): Define for single-stepping.
+	(MACHINE_CPROC_*_OFFSET): Define.
+	(TRACE_*): Define.
+	(START_INFERIOR_TRAPS_EXPECTED): Delete definition.
+
 Wed May 10 18:59:26 1995  Stu Grossman  (grossman@andros.cygnus.com)
 
 	* hppa-tdep.c (read_unwind_info):  Cosmetic cleanup.

gdb/config/pa/.Sanitize

@@ -25,10 +25,12 @@ hppabsd.mh
 hppabsd.mt
 hppahpux.mh
 hppahpux.mt
+hppaosf.mh
 hppaosf.mt
 hppapro.mt
 nm-hppab.h
 nm-hppah.h
+nm-hppao.h
 tm-hppa.h
 tm-hppab.h
 tm-hppah.h

gdb/config/pa/hppaosf.mh

@@ -0,0 +1,6 @@
+# Host: Hewlett-Packard PA-RISC machine, running BSD
+XDEPFILES= 
+XM_FILE= xm-hppab.h
+NAT_FILE= nm-hppao.h
+NATDEPFILES= fork-child.o m3-nat.o hppam3-nat.o somread.o hpread.o somsolib.o
+NAT_CLIBS= -lmachid -lnetname -lmach

gdb/config/pa/nm-hppao.h

@@ -0,0 +1,56 @@
+/* HPPA PA-RISC machine native support for Lites, for GDB.
+   Copyright 1995 Free Software Foundation, Inc. 
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
+
+#include "nm-m3.h"
+#define U_REGS_OFFSET 0
+
+#define KERNEL_U_ADDR 0
+
+/* What a coincidence! */
+#define REGISTER_U_ADDR(addr, blockend, regno)				\
+{ addr = (int)(blockend) + REGISTER_BYTE (regno);}
+
+/* This macro defines the register numbers (from REGISTER_NAMES) that
+   are effectively unavailable to the user through ptrace().  It allows
+   us to include the whole register set in REGISTER_NAMES (inorder to
+   better support remote debugging).  If it is used in
+   fetch/store_inferior_registers() gdb will not complain about I/O errors
+   on fetching these registers.  If all registers in REGISTER_NAMES
+   are available, then return false (0).  */
+
+#define CANNOT_STORE_REGISTER(regno)            \
+                   ((regno) == 0) ||     \
+                   ((regno) == PCSQ_HEAD_REGNUM) || \
+                   ((regno) >= PCSQ_TAIL_REGNUM && (regno) < IPSW_REGNUM) ||  \
+                   ((regno) > IPSW_REGNUM && (regno) < FP4_REGNUM)
+
+/* fetch_inferior_registers is in hppab-nat.c.  */
+#define FETCH_INFERIOR_REGISTERS
+
+/* attach/detach works to some extent under BSD and HPUX.  So long
+   as the process you're attaching to isn't blocked waiting on io,
+   blocked waiting on a signal, or in a system call things work 
+   fine.  (The problems in those cases are related to the fact that
+   the kernel can't provide complete register information for the
+   target process...  Which really pisses off GDB.)  */
+
+#define ATTACH_DETACH
+
+#define EMULATOR_BASE 0x90100000
+#define EMULATOR_END  0x90200000

gdb/config/pa/tm-hppao.h

@@ -2,6 +2,28 @@
    Contributed by the Center for Software Science at the
    University of Utah (pa-gdb-bugs@cs.utah.edu).  */
 
+/* Define offsets to access CPROC stack when it does not have
+ * a kernel thread.
+ */
+#define MACHINE_CPROC_SP_OFFSET 20
+#define MACHINE_CPROC_PC_OFFSET 16
+#define MACHINE_CPROC_FP_OFFSET 12
+
+/*
+ * Software defined PSW masks.
+ */
+#define PSW_SS  0x10000000      /* Kernel managed single step */
+
+/* Thread flavors used in re-setting the T bit.
+ * @@ this is also bad for cross debugging.
+ */
+#define TRACE_FLAVOR		HP800_THREAD_STATE
+#define TRACE_FLAVOR_SIZE	HP800_THREAD_STATE_COUNT
+#define TRACE_SET(x,state) \
+	((struct hp800_thread_state *)state)->cr22 |= PSW_SS
+#define TRACE_CLEAR(x,state) \
+  	((((struct hp800_thread_state *)state)->cr22 &= ~PSW_SS), 1)
+
 /* For OSF1 (Should be close if not identical to BSD, but I haven't
    tested it yet):
 
@@ -44,9 +66,6 @@
     } \
 }
 
-/* OSF1 needs an extra trap.  I assume for the emulator startup (?!?) */
-#define START_INFERIOR_TRAPS_EXPECTED 3
-
 /* OSF1 does not need the pc space queue restored.  */
 #define NO_PC_SPACE_QUEUE_RESTORE
 

gdb/configure.in

@@ -43,7 +43,7 @@ c[12]-*-*)		gdb_host=convex ;;
 hppa*-*-bsd*)		gdb_host=hppabsd ;;
 hppa*-*-hiux*)		gdb_host=hppahpux ;;
 hppa*-*-hpux*)		gdb_host=hppahpux ;;
-hppa*-*-osf*)		gdb_host=hppabsd ;;
+hppa*-*-osf*)		gdb_host=hppaosf ;;
 
 i[345]86-ncr-*)		gdb_host=ncr3000 ;;
 i[345]86-sequent-bsd*)	gdb_host=symmetry ;;  # dynix

gdb/hppam3-nat.c

@@ -0,0 +1,141 @@
+/* Low level interface to HP800 running mach 4.0.
+   Copyright (C) 1995 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
+
+#include "defs.h"
+#include "inferior.h"
+#include "floatformat.h"
+
+#include <stdio.h>
+
+#include <mach.h>
+#include <mach/message.h>
+#include <mach/exception.h>
+#include <mach_error.h>
+
+#include <target.h>
+
+/*
+ * Fetch inferiors registers for gdb.
+ * REGNO specifies which (as gdb views it) register, -1 for all.
+ */
+
+void
+fetch_inferior_registers (regno)
+     int regno;
+{
+  kern_return_t ret;
+  thread_state_data_t state;
+  unsigned int stateCnt = HP800_THREAD_STATE_COUNT;
+  int index;
+  
+  if (! MACH_PORT_VALID (current_thread))
+    error ("fetch inferior registers: Invalid thread");
+
+  if (must_suspend_thread)
+    setup_thread (current_thread, 1);
+
+  ret = thread_get_state (current_thread,
+			  HP800_THREAD_STATE,
+			  state,
+			  &stateCnt);
+
+  if (ret != KERN_SUCCESS)
+    warning ("fetch_inferior_registers: %s ",
+	     mach_error_string (ret));
+  else
+    {
+      for (index = 0; index < NUM_REGS; index++) 
+	supply_register (index,&state[index]);
+    }
+
+  if (must_suspend_thread)
+    setup_thread (current_thread, 0);
+}
+
+/* Store our register values back into the inferior.
+ * If REGNO is -1, do this for all registers.
+ * Otherwise, REGNO specifies which register
+ *
+ * On mach3 all registers are always saved in one call.
+ */
+void
+store_inferior_registers (regno)
+     int regno;
+{
+  kern_return_t ret;
+  thread_state_data_t state;
+  unsigned int stateCnt = HP800_THREAD_STATE_COUNT;
+  register int index;
+
+  if (! MACH_PORT_VALID (current_thread))
+    error ("store inferior registers: Invalid thread");
+
+  if (must_suspend_thread)
+    setup_thread (current_thread, 1);
+
+  /* Fetch the state of the current thread */
+  ret = thread_get_state (current_thread,
+			  HP800_THREAD_STATE,
+			  state,
+			  &stateCnt);
+
+   if (ret != KERN_SUCCESS) 
+    {
+      warning ("store_inferior_registers (get): %s",
+	       mach_error_string (ret));
+      if (must_suspend_thread)
+	setup_thread (current_thread, 0);
+      return;
+    }
+
+
+  /* move gdb's registers to thread's state
+   *
+   * Since we save all registers anyway, save the ones
+   * that gdb thinks are valid (e.g. ignore the regno
+   * parameter)
+   */
+  if (regno > 0 && regno < NUM_REGS ) 
+    {
+      memcpy(&state[regno], &registers[REGISTER_BYTE (regno)], 
+	     REGISTER_RAW_SIZE(regno));
+    }
+  else
+    {
+      for (index = 0; index < NUM_REGS; index++) 
+	memcpy(&state[index], &registers[REGISTER_BYTE (index)], 
+	       REGISTER_RAW_SIZE(index));
+/* 	state[index] = registers[REGISTER_BYTE (index)];*/
+
+    }
+  
+  /* Write gdb's current view of register to the thread
+   */
+  ret = thread_set_state (current_thread,
+			  HP800_THREAD_STATE,
+			  state,
+			  HP800_THREAD_STATE_COUNT);
+  
+  if (ret != KERN_SUCCESS)
+    warning ("store_inferior_registers (set): %s",
+	     mach_error_string (ret));
+
+  if (must_suspend_thread)
+    setup_thread (current_thread, 0);
+}