From ba73c63f53ed79c461b86feacc19166bb80c98ea Mon Sep 17 00:00:00 2001 From: Jason Merrill Date: Sat, 22 Jul 2000 08:20:10 +0000 Subject: [PATCH] merge with gcc --- ChangeLog | 422 ++++++++++++++++++++++++++++++++++++---------- Makefile.in | 95 +++++++++-- config-ml.in | 91 +++++++++- config.if | 10 +- config/mh-ia64pic | 1 + config/mt-ia64pic | 1 + configure | 17 +- configure.in | 156 +++++++++-------- 8 files changed, 605 insertions(+), 188 deletions(-) create mode 100644 config/mh-ia64pic create mode 100644 config/mt-ia64pic diff --git a/ChangeLog b/ChangeLog index d897d1355d..080ed2d2d2 100644 --- a/ChangeLog +++ b/ChangeLog @@ -1,8 +1,19 @@ +2000-07-20 Jason Merrill + + * configure.in: Remove all references to libg++ and librx. + + * configure, configure.in, Makefile.in: Unify gcc and binutils. + 2000-07-20 Hans-Peter Nilsson * config.sub: Update to subversions version 2000-07-06. -2000-07-07 Phil Edwards +2000-07-12 Andrew Haley + + * configure.in (host_makefile_frag): Use mh-ia64pic on IA-64 hosts. + (target_makefile_frag): Use mt-ia64pic on IA-64 targets. + +2000-07-07 Phil Edwards * symlink-tree: Check number of arguments. @@ -10,6 +21,13 @@ Thu Jul 6 15:36:55 2000 Andrew Cagney * texinfo/texinfo.tex: Update to version 2000-05-28.15. +2000-07-05 Jim Wilson + + * Makefile.in (CXX_FOR_TARGET): Add libstdc++ to the library + search path for a g++ extracted from the build tree. This + will allow link tests run by configure scripts in + subdirectories to succeed. + 2000-07-01 Koundinya K * ltconfig: Add support for mips-dde-sysv4.2MP @@ -40,8 +58,6 @@ Tue May 30 19:01:12 2000 Andrew Cagney 20000-05-21 H.J. Lu (hjl@gnu.org) - * configure: Revert changes made on May 18 and May 19. - * Makefile.in (CC_FOR_TARGET): Make sure as/ld in the gcc directory are used if they exist. Make sure $(build_tooldir)/include is searched for header files, @@ -49,29 +65,20 @@ Tue May 30 19:01:12 2000 Andrew Cagney (GCC_FOR_TARGET): Likewise. (CXX_FOR_TARGET): Likewise. -20000-05-19 H.J. Lu (hjl@gnu.org) - - * configure: Provide --disable-target-dir-sanity-checking to - disable the gcc directory checking for cross compiling. - -20000-05-18 H.J. Lu (hjl@gnu.org) - - * configure: Ask to create the gcc directory for cross - compiling if necessary. - Thu May 18 10:58:13 2000 Jeffrey A Law (law@cygnus.com) * configure.in (hppa*64*-*-*): Do build ld for this configuration. -2000-05-18 David Edelsohn - - * configure.in: Special case powerpc*-*-aix* target_makefile_frag. - Wed May 17 16:03:48 2000 Alexandre Oliva * Makefile.in (configure-target-libiberty): Depend on configure-target-newlib. +2000-05-16 Alexandre Oliva + + * configure.in, Makefile.in: Merge all libffi-related + configury stuff from the libgcj tree. + Tue May 16 10:06:21 2000 Andrew Cagney Thu Apr 27 11:01:48 2000 Andrew Cagney : @@ -84,6 +91,10 @@ Tue May 16 09:57:35 2000 Andrew Cagney current version information. Add to proto-toplev directory. (gdb-taz): Build do-djunpack. +2000-05-15 David Edelsohn + + * configure.in: Special case powerpc*-*-aix* target_makefile_frag. + 2000-05-13 Alexandre Oliva * ltmain.sh: Preserve in relink_command any environment @@ -102,14 +113,14 @@ Wed May 10 21:26:51 2000 Jim Wilson * djunpack.bat: Change the Sed script to replace @V@ in fnchange.lst with the version name. +2000-05-01 Benjamin Kosnik + + * config.if: Tweak. + 2000-04-23 Eli Zaretskii * djunpack.bat: New file. -2000-04-21 Michael Meissner - - * config.sub (d30v): Add d30v as a basic machine type. - Wed Apr 19 12:46:26 2000 Andrew Cagney * Makefile.in (taz, gdb-taz, gas.tar.bz2, binutils.tar.bz2, @@ -117,6 +128,11 @@ Wed Apr 19 12:46:26 2000 Andrew Cagney dejagnu.tar.bz2, gdb+dejagnu.tar.bz2, insight.tar.bz2, insight+dejagnu.tar.bz2, newlib.tar.bz2): Pass MD5PROG to sub-make. +2000-04-16 Dave Pitts + + * config.sub (case $basic_machine): Change default for "ibm-*" + to "openedition". + Wed Apr 12 16:42:48 2000 Andrew Cagney * Makefile.in (gdb-taz): New target. GDB specific archive. @@ -135,24 +151,23 @@ Fri Apr 7 18:10:29 2000 Andrew Cagney * configure (warn_cflags): Delete. -2000-03-30 Christopher Faylor +2000-04-05 Benjamin Kosnik + Martin v. Loewis - * Makefile.in (CC_FOR_TARGET): Add new winsup directory - structure stuff to -L library search. - (CXX_FOR_TARGET): Ditto. + * configure.in (enable_libstdcxx_v3): Add. + (target_libs): Add bits here to switch between libstdc++-v2 and + libstdc++-v3. + * config.if: And this file too. + * Makefile.in: Add libstdc++-v3 targets. + +2000-04-05 Michael Meissner + + * config.sub (d30v): Add d30v as a basic machine type. 2000-03-29 Jason Merrill * configure.in: -linux-gnu*, not -linux-gnu. -2000-03-10 H.J. Lu - - * Makefile.in (all-gcc): Backed out the last change. - -2000-03-10 H.J. Lu - - * Makefile.in (all-gcc): Run ld/ld-new if necessary. - Fri Mar 3 18:44:08 2000 Andrew Cagney * Makefile.in (taz): Set PACKAGE to TOOL when not defined. @@ -197,11 +212,68 @@ Thu Feb 24 16:15:56 2000 Andrew Cagney * configure (gcc_version): When setting, narrow search to lines containing `version_string'. +2000-02-15 Denis Chertykov + + * config.sub: Add support for avr target. + +Tue Feb 1 00:07:46 2000 Hans-Peter Nilsson + + * config.sub: Add mmix-knuth-mmixware. + +2000-01-27 Christopher Faylor + + * Makefile.in (CC_FOR_TARGET): Add new winsup directory + structure stuff to -L library search. + (CXX_FOR_TARGET): Ditto. + (CROSS_CHECK_MODULES): Fix spelling mistake. + +2000-01-24 Mark Mitchell + + * Makefile.in (CXX_FOR_TARGET): Use g++, not xgcc, to invoke + the C++ compiler. + +2000-01-12 Richard Henderson + + * configure.in: Don't build some bits for beos. + +2000-01-12 Joel Sherrill (joel@OARcorp.com) + + * Makefile.in (CC_FOR_TARGET): Use newlib libraries as well + as include files. + 2000-01-06 Geoff Keating * configure.in: Use mt-aix43 to handle *_TARGET defs, not mh-aix43. +1999-12-14 Richard Henderson + + * config.guess (alpha-osf, alpha-linux): Detect ev67. + * config.sub: Accept alphaev[78], alphaev8. + +1999-12-03 Alexandre Oliva + + * config.guess, config.sub: Update from autoconf. + +Tue Nov 23 00:57:41 1999 Rainer Orth + + * config-ml.in (sparc*-*-*): Disable sparcv9 support if the + necessary libraries are missing. + +1999-10-25 Andreas Schwab + + * configure: Fix quoting inside arguments of eval. + +1999-10-21 Nick Clifton + + * config-ml.in: Allow suppression of some ARM multilibs. + +Tue Sep 7 23:33:57 1999 Linas Vepstas + + * config.guess: Add OS/390 match pattern. + * config.sub: Add mvs, openedition targets. + * configure.in (i370-ibm-opened*): New. + 1999-09-04 Steve Chamberlain * config.sub: Add support for configuring for pj. @@ -210,11 +282,16 @@ Thu Feb 24 16:15:56 2000 Andrew Cagney * config.sub (maybe_os): Add support for configuring for fr30. -1999-08-27 Nick Clifton +1999-08-25 Nick Clifton * configure.in: Do not configure or build ld for AIX platforms. ld is known to be broken on these platforms. +Wed Aug 25 01:12:25 1999 Rainer Orth + + * config-ml.in: Pass compiler flag corresponding to multidirs to + subdir configures. + 1999-08-09 Ian Lance Taylor * Makefile.in (LDFLAGS): Define. @@ -235,11 +312,52 @@ Thu Feb 24 16:15:56 2000 Andrew Cagney * configure (tmpfile): Change cONf$$ to cNf$$ to avoid an overly long file name when using DJGPP on MS-DOS. +Wed Aug 4 02:07:14 1999 Jeffrey A Law (law@cygnus.com) + + * config.sub (vxworks case): Use os=-vxworks, not os=vxworks. + 1999-07-30 Alan Modra * Makefile.in (check-target-libio): Remove all-target-libstdc++ dependency as this causes "make check" to globally "make all" +Tue Jun 22 23:45:18 1999 Tom Tromey + + * configure.in (target_libs): Added target-zlib. + * Makefile.in (ALL_TARGET_MODULES): Added zlib. + (CONFIGURE_TARGET_MODULES): Likewise. + (CHECK_TARGET_MODULES): Likewise. + (INSTALL_TARGET_MODULES): Likewise. + (CLEAN_TARGET_MODULES): Likewise. + (configure-target-zlib): New target. + (all-target-zlib): Likewise. + (all-target-libjava): Depend on all-target-zlib. + (configure-target-libjava): Depend on configure-target-zlib. + + * Makefile.in (configure-target-libjava): Depend on + configure-target-newlib. + (configure-target-boehm-gc): New target. + (configure-target-qthreads): New target. + + * configure.in (target_libs): Added target-qthreads. + * Makefile.in (ALL_TARGET_MODULES): Added qthreads. + (CONFIGURE_TARGET_MODULES): Likewise. + (CHECK_TARGET_MODULES): Likewise. + (INSTALL_TARGET_MODULES): Likewise. + (CLEAN_TARGET_MODULES): Likewise. + (all-target-qthreads): New target. + (configure-target-libjava): Depend on configure-target-qthreads. + (all-target-libjava): Depend on all-target-qthreads. + + * Makefile.in (ALL_TARGET_MODULES): Added libjava, boehm-gc. + (CONFIGURE_TARGET_MODULES): Likewise. + (CHECK_TARGET_MODULES): Likewise. + (INSTALL_TARGET_MODULES): Likewise. + (CLEAN_TARGET_MODULES): Likewise. + (all-target-libjava): New target. + (all-target-boehm-gc): Likewise. + * configure.in (target_libs): Added libjava, boehm-gc. + 1999-07-22 Ian Lance Taylor * Makefile.in (binutils.tar.bz2): Don't pass makeall.bat and @@ -281,9 +399,26 @@ Sun May 30 16:03:16 1999 Cort Dougan * config.guess (ppc-*-linux-gnu): Also use ld emul elf32ppclinux. +Tue May 25 11:20:46 1999 H.J. Lu (hjl@gnu.org) + + * config.guess (dummy): Changed to $dummy. + 1999-05-24 Nick Clifton - * config.sub: Updated to match latest EGCS version. + * config.sub: Tidied up case statements. + +1999-05-22 Ben Elliston + + * config.guess: Handle NEC UX/4800. Contributed by Jiro Takabatake + . + + * config.guess: Merge with FSF version. Future changes will be + more accurately recorded in this ChangeLog. + * config.sub: Likewise. + +Thu May 20 10:00:42 1999 Stephen L Moshier + + * Makefile.in (GCC_FOR_TARGET): Add -I$(build_tooldir)/include. 1999-04-30 Tom Tromey @@ -299,11 +434,26 @@ Sun May 30 16:03:16 1999 Cort Dougan (noconfigdirs): Don't build any bsp stuff for for arm-oabi targets. Bad merge removed these two changes. +Tue Apr 13 22:50:54 1999 Donn Terry (donn@interix.com) + Martin Heller (Ing.-Buero_Heller@t-online.de) + + * config.guess (interix Alpha): Add. + 1999-04-11 Richard Henderson * configure.in (i?86-*-beos*): Do config gperf; don't config gdb, newlib, or libgloss. +Sun Apr 11 23:55:34 1999 Alexandre Oliva + + * config-ml.in: On mips*-*-*, if multidirs contains mabi=64, try to + link a trivial program with -mabi=64. If it fails, remove mabi=64 + from multidirs. + +Sat Apr 10 21:50:01 1999 Philipp Thomas (kthomas@gwdg.de) + + * config.sub: Set basic_machine to i586 when target_alias = k6-*. + 1999-04-08 Nick Clifton * config.sub: Add support for mcore targets. @@ -487,17 +637,6 @@ Wed Dec 30 01:13:03 1998 Christopher Faylor * Makefile.in: Add libtermcap target. * config/mt-cygwin: New file. libtermcap target info. -Tue Dec 15 17:02:58 1998 Bob Manson - - * configure.in: Add cygmon for x86-coff and x86-elf. Configure - cygmon for all sparclite targets, regardless of object format. - -1998-12-15 Mark Salter - - * configure.in: Added target-bsp for several target architectures. - - * Makefile.in: Added rules for bsp. - Wed Dec 23 00:20:50 1998 Jeffrey A Law (law@cygnus.com) * config.sub: Clean up handling of hppa2.0. @@ -510,6 +649,17 @@ Thu Dec 17 01:22:30 1998 Jeffrey A Law (law@cygnus.com) * config.sub: Handle hppa2.0. +Tue Dec 15 17:02:58 1998 Bob Manson + + * configure.in: Add cygmon for x86-coff and x86-elf. Configure + cygmon for all sparclite targets, regardless of object format. + +1998-12-15 Mark Salter + + * configure.in: Added target-bsp for several target architectures. + + * Makefile.in: Added rules for bsp. + Fri Dec 4 01:34:02 1998 Jeffrey A Law (law@cygnus.com) * config.guess: Improve detection of hppa2.0 processors. @@ -525,7 +675,6 @@ Fri Dec 4 01:33:05 1998 Niall Smart directory is "unwanted". * Makefile.in ($(CONFIGURE_TARGET_MODULES)): Likewise. - Wed Nov 18 18:28:45 1998 Geoffrey Noer * ltconfig: import from libtool, after changing libtool to @@ -573,6 +722,10 @@ Mon Nov 2 15:19:33 1998 Geoffrey Noer cygwin* instead of cygwin32*. * config.sub: Check cygwin* instead of cygwin32*. +Thu Oct 22 10:55:25 1998 Robert Lipe + + * config.guess: Match any version of Unixware7. + 1998-10-20 Syd Polk * Makefile.in configure.in: Add the ability to use tcl8.1 and tk8.1 @@ -587,10 +740,30 @@ Wed Oct 14 10:29:06 1998 Jeffrey A Law (law@cygnus.com) * Makefile.in (DEVO_SUPPORT): Add config.if. +Tue Oct 13 15:45:36 1998 Manfred Hollstein + + * configure: Add pattern to replace "build_tooldir"'s + definition in the generated Makefile with "tooldir"'s + actual value. + Tue Oct 13 09:17:06 1998 Jeffrey A Law (law@cygnus.com) * config.sub: Bring back lost sparcv9. + * Makefile.in (all-snvavigator): Remove all-flexlm dependency. + +Mon Oct 12 12:09:44 1998 Jeffrey A Law (law@cygnus.com) + + * Makefile.in (CHILL_FOR_TARGET): Mirror recent changes to + CC_FOR_TARGET and friends. + +Mon Oct 12 12:09:30 1998 Alexandre Oliva + + * Makefile.in (build_tooldir): New variable, same as tooldir. + (CC_FOR_TARGET, GCC_FOR_TARGET, CXX_FOR_TARGET): Add + -B$(build_tooldir)/bin/. + (BASE_FLAGS_TO_PASS): Pass build_tooldir down. + Wed Sep 30 22:20:50 1998 Robert Lipe * config.sub: Add support for i[34567]86-pc-udk. @@ -602,9 +775,18 @@ Wed Sep 30 19:23:48 1998 Geoffrey Noer tools module * configure.in: ditto +Wed Sep 30 03:00:05 1998 Jeffrey A Law (law@cygnus.com) + + * Makefile.in (TARGET_CONFIGDIRS): Add libobjc. + (ALL_TARGET_MODULES): Add all-target-libobjc. + (CONFIGURE_TARGET_MODULES, CHECK_TARGET_MODULES): Similarly. + (INSTALL_TARGET_MODULES, CLEAN_TARGET_MODULES): Similarly. + (all-target-libchill): Add dependencies. + * configure.in (target_libs): Add libchill. + 1998-09-30 Manfred Hollstein - * configure.in (target_subdir): Remove duplicate line. + * configure.in (target_subdir): Remove duplicate line. Tue Sep 29 22:45:41 1998 Felix Lee @@ -625,7 +807,6 @@ Mon Sep 28 04:04:27 1998 Jeffrey A Law (law@cygnus.com) * Makefile.in (bootstrap): Pass TARGET_FLAGS_TO_PASS to `make all'. - Sun Sep 20 00:13:02 1998 Richard Henderson * config.sub: Fix typo in last change. @@ -694,12 +875,12 @@ Fri Aug 28 12:28:26 1998 Per Bothner Thu Aug 13 12:49:29 1998 H.J. Lu - * Makefile.in (taz): Try "chmod -R og=u ." before + * Makefile.in (taz): Try "chmod -R og=u ." before "chmod og=u `find . -print`". Fri Jul 31 09:38:33 1998 Catherine Moore - * configure.in: Add arm-elf and thumb-elf support. + * configure.in: Add arm-elf and thumb-elf support. Mon Jul 27 16:23:58 1998 Doug Evans @@ -866,11 +1047,11 @@ Tue Jun 23 22:42:32 1998 Mark Alexander Fri Jun 19 02:36:59 1998 Alexandre Oliva - * Makefile.in (local-clean): remove *.log - (warning.log): built with warn_summary from build.log - (mail-report.log): run test_summary - (mail-report-with-warnings.log): run test_summary including - warning.log in the report + * Makefile.in (local-clean): Remove *.log. + (warning.log): Built with warn_summary from build.log. + (mail-report.log): Run test_summary. + (mail-report-with-warnings.log): Run test_summary including + warning.log in the report. Thu Jun 18 11:26:03 1998 Robert Lipe @@ -912,7 +1093,11 @@ Thu May 28 19:31:13 1998 Ian Lance Taylor Sat May 23 23:44:13 1998 Alexandre Oliva * Makefile.in (boostrap2-lean, bootstrap3-lean, - bootstrap4-lean): new targets + bootstrap4-lean): New targets. + +Mon May 11 23:55:56 1998 Jeffrey A Law (law@cygnus.com) + + * mpw-* Delete. Not used. Mon May 11 23:11:34 1998 Jeffrey A Law (law@cygnus.com) @@ -937,8 +1122,8 @@ Tue May 5 18:02:24 1998 Ian Lance Taylor 1998-04-30 Paul Eggert - * Makefile.in (EXTRA_GCC_FLAGS): Remove backslash at end; - Solaris `make' causes it to continue to next definition. + * Makefile.in (EXTRA_GCC_FLAGS): Remove backslash at end; + Solaris `make' causes it to continue to next definition. Tue Apr 28 16:24:24 1998 Jason Molenda (crash@bugshack.cygnus.com) @@ -954,7 +1139,7 @@ Tue Apr 28 07:42:00 1998 Mark Alexander * config.sub: Recognize sparc86x. Tue Apr 28 07:35:02 1998 Michael Meissner - + * configure.in (--enable-target-optspace): Remove debug echo. Thu Apr 23 21:31:16 1998 Jim Wilson @@ -985,7 +1170,6 @@ Tue Apr 21 23:06:54 1998 Tom Tromey (all-gprof): Likewise. (all-ld): Likewise. - 1998-04-19 Brendan Kehoe * configure.in (host_tools): Fix typo, lbtool -> libtool. @@ -1022,7 +1206,11 @@ Mon Apr 13 15:37:24 1998 Ian Lance Taylor * ltconfig: Add cygwin32 support. * Makefile.in, configure.in: Add libtool as a native only directory - to configure and build. + to configure and build. + +Sun Apr 12 20:58:46 1998 Jeffrey A Law (law@cygnus.com) + + * Makefile.in (INSTALL_MODULES): Remove texinfo. Wed Apr 8 13:18:56 1998 Philippe De Muyter @@ -1050,6 +1238,11 @@ Thu Mar 26 15:00:11 1998 Keith Seitz * configure: Do not disable building gdbtk for cygwin32 hosts. +Wed Mar 25 10:04:18 1998 Nick Clifton + + * configure.in: Add thumb-coff target. + * config.sub: Add thumb-coff target. + Wed Mar 25 11:49:12 1998 Jason Molenda (crash@bugshack.cygnus.com) * Makefile.in: Revert yesterday's change. @@ -1057,9 +1250,9 @@ Wed Mar 25 11:49:12 1998 Jason Molenda (crash@bugshack.cygnus.com) Tue Mar 24 16:58:29 1998 Jason Molenda (crash@bugshack.cygnus.com) - * Makefile.in (TARGET_CONFIGDIRS, ALL_TARGET_MODULES, - CONFIGURE_TARGET_MODULES, CHECK_TARGET_MODULES, - INSTALL_TARGET_MODULES, CLEAN_TARGET_MODULES, all-target-winsup): + * Makefile.in (TARGET_CONFIGDIRS, ALL_TARGET_MODULES, + CONFIGURE_TARGET_MODULES, CHECK_TARGET_MODULES, + INSTALL_TARGET_MODULES, CLEAN_TARGET_MODULES, all-target-winsup): Remove references to librx and libg++. Tue Mar 24 18:28:12 1998 Eric Mumpower @@ -1097,6 +1290,7 @@ Wed Mar 18 09:24:59 1998 Nick Clifton * configure.in: Add Thumb-pe target. Tue Mar 17 16:59:00 1998 Syd Polk + * Makefile.in - changed sn targets to snavigator * configure.in - changed sn targets to snavigator @@ -1119,7 +1313,6 @@ Fri Mar 6 00:14:55 1998 Franz Sirl * configure.in: Revert 3 Jan change for powerpc-linux-gnulibc1. - Mon Feb 23 15:09:18 1998 Bruno Haible * configure.in: Remove libgloss from noconfigdirs for MN10300. -Fri Feb 20 16:47:24 1998 Tom Tromey - - * configure: Don't let builds be done in source tree. - Thu Feb 19 13:40:41 1998 Ian Lance Taylor * configure.in: Don't build libgui for a cygwin32 target when not on @@ -1199,11 +1388,20 @@ Mon Feb 2 19:38:19 1998 Ian Lance Taylor * config.sub: Add tic30 cases, and map c30 to tic30. +Sun Feb 1 02:40:41 1998 Richard Henderson + + * Makefile.in (TARGET_CONFIGDIRS): Add libf2c. + (ALL_TARGET_MODULES, CONFIGURE_TARGET_MODULES): Similarly + (CHECK_TARGET_MODULES, INSTALL_TARGET_MODULES): Similarly + (CLEAN_TARGET_MODULES): Similarly + (all-target-libf2c): Add dependences. + * configure.in (target_libs): Add libf2c. + Fri Jan 30 17:18:32 1998 Geoffrey Noer - * configure.in: Remove expect from noconfigdirs when target - is cygwin32. OK to build expect and dejagnu with Canadian - Cross. + * configure.in: Remove expect from noconfigdirs when target + is cygwin32. OK to build expect and dejagnu with Canadian + Cross. Wed Jan 28 12:58:49 1998 Ian Lance Taylor @@ -1236,7 +1434,7 @@ Sat Jan 24 01:59:45 1998 Manfred Hollstein ${package_makefile_frag} to where it should be according to the comment. -Fri Jan 23 00:30:21 1998 Philip Blundell +Fri Jan 23 00:29:28 1998 Philip Blundell * config.guess: Add support for Linux/ARM. @@ -1261,13 +1459,13 @@ Sat Jan 17 21:04:59 1998 H.J. Lu (hjl@gnu.org) Fri Jan 16 00:41:37 1998 Alexandre Oliva - * configure.in: check whether host and target makefile - fragments exist before adding them to *_makefile_frag + * configure.in: Check whether host and target makefile + fragments exist before adding them to *_makefile_frag. Wed Jan 14 23:39:10 1998 Bob Manson * configure.in (target_configdirs): Add cygmon for sparc64-elf. - + Wed Jan 14 12:48:07 1998 Keith Seitz * configure.in: Make sure we only replace RPATH_ENVVAR on @@ -1290,7 +1488,7 @@ Sun Jan 4 01:06:55 1998 Mumit Khan * config.sub: Add mingw32 support. * configure.in: Likewise. - * mh-mingw32: New file. + * config/mh-mingw32: New file. Sat Jan 3 12:11:05 1998 Franz Sirl @@ -1307,17 +1505,20 @@ Wed Dec 24 22:46:55 1997 Jeffrey A Law (law@cygnus.com) * config.guess: Sync with egcs. Picks up new alpha support, BeOS & some additional linux support. -Tue Dec 23 12:45:50 1997 Jeffrey A Law (law@cygnus.com) +Tue Dec 23 12:44:24 1997 Jeffrey A Law (law@cygnus.com) * config.guess: HP 9000/803 is a PA1.1 machine. +Mon Dec 22 02:39:24 1997 Richard Henderson + + * configure.in: It's alpha*-... Sun Dec 21 16:53:12 1997 H.J. Lu (hjl@gnu.ai.mit.edu) - * configure.in (host_makefile_frag, target_makefile_frag): - Handle multiple config files. - (alpha-*-linux*): Treat alpha-*-linux* as alpha-*-linux* and - alpha-*-*. + * configure.in (host_makefile_frag, target_makefile_frag): + Handle multiple config files. + (alpha-*-linux*): Treat alpha-*-linux* as alpha-*-linux* and + alpha-*-*. Thu Dec 18 13:13:03 1997 Doug Evans @@ -1489,10 +1690,10 @@ Wed Sep 24 15:18:32 1997 Ian Lance Taylor Thu Sep 18 23:58:27 1997 Jeffrey A Law (law@cygnus.com) -* Makefile.in (cross): New target. + * Makefile.in (cross): New target. Thu Sep 18 21:43:23 1997 Alexandre Oliva - Jeff Law + Jeff Law * Makefile.in (bootstrap2, bootstrap3): New targets. (all-bootstrap): Remove outdated and confusing target. @@ -1503,7 +1704,6 @@ Thu Sep 18 15:37:42 1997 Andrew Cagney * configure (tooldir): enable_gdbtk=YES for cygwin32, NO for windows. Consistent with gdb/configure. - 1997-09-15 02:37 Ulrich Drepper * config/mt-linux: Define CXXFLAGS to make sure -fvtable-thunks is @@ -1522,7 +1722,7 @@ Sun Sep 14 20:53:42 1997 Geoffrey Noer * config/mh-cygwin32: ok to build split texinfo files Fri Sep 12 16:19:20 1997 Geoffrey Noer - + * configure.in: remove bison from noconfigdirs for Cygwin32 host Thu Sep 11 16:40:46 1997 H.J. Lu (hjl@gnu.ai.mit.edu) @@ -1544,6 +1744,10 @@ Mon Sep 8 20:46:20 1997 Ian Lance Taylor * config.guess: Merge with FSF. +Sun Sep 7 23:18:32 1997 Fred Fish + + * config.sub: Change 'amigados' to 'amigaos' to match current usage. + Sun Sep 7 15:55:28 1997 Gavin Koch * config.sub: Add "marketing-names" patch. @@ -1556,6 +1760,10 @@ Fri Sep 5 12:27:17 1997 Jeffrey A Law (law@cygnus.com) * config.sub: Handle v850-elf. +Wed Sep 3 22:01:58 1997 Fred Fish + + * .cvsignore (*-install): Remove. + Wed Sep 3 12:15:24 1997 Chris Provenzano * ltconfig: Set CONFIG_SHELL in libtool. @@ -1834,7 +2042,7 @@ Thu Jun 12 21:12:28 1997 Bob Manson Fri Jun 6 21:38:40 1997 Rob Savoye - * configure: Use '|' instead of ":" as the seperator in + * configure: Use '|' instead of ":" as the separator in sed. Otherwise sed chokes on NT path names with drive designators. Also look for "?:*" as the leading characters in an absolute pathname. @@ -2386,10 +2594,26 @@ Mon Sep 16 17:00:52 1996 Ian Lance Taylor * configure.in: Use a single line for host_tools and native_only. +Tue Sep 16 09:55:07 1997 Andrew Cagney + + * Makefile.in (install-itcl): Install tcl first. + +Sun Sep 14 20:53:42 1997 Geoffrey Noer + + * config/mh-cygwin32: ok to build split texinfo files + +Fri Sep 12 16:19:20 1997 Geoffrey Noer + + * configure.in: remove bison from noconfigdirs for Cygwin32 host + Mon Sep 9 12:21:30 1996 Doug Evans * config.sub, configure.in: Add entries for m32r. +Mon Sep 8 20:46:20 1997 Ian Lance Taylor + + * config.guess: Merge with FSF. + Thu Sep 5 13:52:47 1996 Tom Tromey * Makefile.in (inet-install): Don't run install-gzip. @@ -4972,6 +5196,10 @@ Fri Oct 8 14:15:39 1993 Ken Raeburn (raeburn@cygnus.com) * config.sub: Accept linux*coff and linux*elf as operating systems. +Tue Oct 7 14:24:41 1997 Ian Lance Taylor + + * ltmain.sh: Handle symlinks in generated script. + Thu Oct 7 12:57:19 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * config.sub: Recognize mips64, and mips3 as an alias for it. @@ -4993,14 +5221,30 @@ Mon Oct 4 16:15:09 1993 david d `zoo' zuhn (zoo@rtl.cygnus.com) * configure.in: default to '--with-gnu-as' and '--with-gnu-ld' if gas and ld are in the source tree and are in ${configdirs}. If ${use_gnu_as} or ${use_gnu_ld} are 'no', then don't set the - the --with options (but still pass them down on the command line, + --with options (but still pass them down on the command line, if they were explicitly specified). +Wed Oct 1 13:11:27 1997 Ian Lance Taylor + + * configure: Handle autoconf style directory options: --bindir, + --datadir, --includedir, --infodir, --libdir, --libexecdir, + --mandir, --oldincludedir, --sbindir, --sharedstatedir, + --sysconfdir. + * Makefile.in (sbindir, libexecdir, sysconfdir): New variables. + (sharedstatedir, localstatedir, oldincludedir): New variables. + (BASE_FLAGS_TO_PASS): Pass down bindir, datadir, includedir, + infodir, libdir, libexecdir, localstatedir, mandir, oldincludedir, + sbindir, sharedstatedir, and sysconfdir. + Fri Sep 24 19:11:13 1993 david d `zoo' zuhn (zoo@rtl.cygnus.com) * configure: substitute SHELL value in Makefile.in with ${CONFIG_SHELL} +Wed Sep 24 15:18:32 1997 Ian Lance Taylor + + * ltmain.sh: Tweak shell pattern to avoid bug in NetBSD /bin/sh. + Thu Sep 23 18:05:13 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * configure.in: Build gas, ld, and binutils for *-*-sysv4* and diff --git a/Makefile.in b/Makefile.in index f1acbd07f5..3fb2114f02 100644 --- a/Makefile.in +++ b/Makefile.in @@ -37,7 +37,8 @@ infodir=${prefix}/info mandir=${prefix}/man gxx_include_dir=${includedir}/g++ -tooldir = $(exec_prefix)/$(target) +tooldir = $(exec_prefix)/$(target_alias) +build_tooldir = $(exec_prefix)/$(target_alias) program_transform_name = @@ -97,9 +98,9 @@ CHILL_LIB = -lchill CXX = c++ # Use -O2 to stress test the compiler. -LIBCXXFLAGS = $(CXXFLAGS) -fno-implicit-templates -fexceptions +LIBCXXFLAGS = $(CXXFLAGS) -fno-implicit-templates CXXFLAGS_FOR_TARGET = $(CXXFLAGS) -LIBCXXFLAGS_FOR_TARGET = $(CXXFLAGS_FOR_TARGET) -fno-implicit-templates -fexceptions +LIBCXXFLAGS_FOR_TARGET = $(CXXFLAGS_FOR_TARGET) -fno-implicit-templates RANLIB = ranlib @@ -168,9 +169,7 @@ OTHERS = # This is set by the configure script to the list of directories which # should be built using the target tools. - - -TARGET_CONFIGDIRS = libiberty libgloss $(SPECIAL_LIBS) newlib libio librx libstdc++ libg++ winsup opcodes bsp libstub cygmon +TARGET_CONFIGDIRS = libiberty libgloss $(SPECIAL_LIBS) newlib libio librx libstdc++ libg++ winsup opcodes bsp libstub cygmon libf2c libchill libobjc # Target libraries are put under this directory: # Changed by configure to $(target_alias) if cross. @@ -216,10 +215,10 @@ CC_FOR_TARGET = ` \ if [ -f $$r/$(TARGET_SUBDIR)/newlib/Makefile ] ; then \ case "$(target_canonical)" in \ i[3456]86-*-cygwin*) \ - echo $$r/gcc/xgcc -B$$r/gcc/ -B$(build_tooldir)/bin/ -B$$r/$(TARGET_SUBDIR)/newlib/ -L$$r/$(TARGET_SUBDIR)/winsup -L$$r/$(TARGET_SUBDIR)/winsup/cygwin -L$$r/$(TARGET_SUBDIR)/winsup/w32api/lib -idirafter $$r/$(TARGET_SUBDIR)/newlib/targ-include -idirafter $$s/winsup/include -idirafter $$s/winsup/cygwin/include -idirafter $$s/winsup/w32api/include -idirafter $$s/newlib/libc/include -idirafter $$s/newlib/libc/sys/cygwin -idirafter $$s/newlib/libc/sys/cygwin32 -nostdinc; \ + echo $$r/gcc/xgcc -B$(build_tooldir)/bin/ -B$$r/$(TARGET_SUBDIR)/newlib/ -B$$r/gcc/ -L$$r/$(TARGET_SUBDIR)/winsup -L$$r/$(TARGET_SUBDIR)/winsup/cygwin -L$$r/$(TARGET_SUBDIR)/winsup/w32api/lib -idirafter $$r/$(TARGET_SUBDIR)/newlib/targ-include -idirafter $$s/winsup/include -idirafter $$s/winsup/cygwin/include -idirafter $$s/winsup/w32api/include -idirafter $$s/newlib/libc/include -idirafter $$s/newlib/libc/sys/cygwin -idirafter $$s/newlib/libc/sys/cygwin32 -nostdinc; \ ;; \ *) \ - echo $$r/gcc/xgcc -B$$r/gcc/ -idirafter $$r/$(TARGET_SUBDIR)/newlib/targ-include -idirafter $$s/newlib/libc/include -nostdinc; \ + echo $$r/gcc/xgcc -B$(build_tooldir)/bin/ -B$$r/$(TARGET_SUBDIR)/newlib/ -B$$r/gcc/ -idirafter $$r/$(TARGET_SUBDIR)/newlib/targ-include -idirafter $$s/newlib/libc/include -nostdinc; \ ;; \ esac \ else \ @@ -237,11 +236,11 @@ CC_FOR_TARGET = ` \ # variable is passed down to the gcc Makefile, where it is used to # build libgcc2.a. We define it here so that it can itself be # overridden on the command line. -GCC_FOR_TARGET = $$r/gcc/xgcc -B$(build_tooldir)/bin/ -B$(build_tooldir)/lib/ -B$$r/gcc/ -I$(build_tooldir)/include +GCC_FOR_TARGET = $$r/gcc/xgcc -B$(build_tooldir)/bin/ -B$(build_tooldir)/lib/ -B$$r/gcc/ -isystem $(build_tooldir)/include CHILL_FOR_TARGET = ` \ if [ -f $$r/gcc/xgcc ] ; then \ - echo $$r/gcc/xgcc -B$$r/gcc/ -L$$r/gcc/ch/runtime/; \ + echo $$r/gcc/xgcc -B$(build_tooldir)/bin/ -B$(build_tooldir)/lib/ -B$$r/gcc/ -L$$r/gcc/ch/runtime/; \ else \ if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \ echo $(CC); \ @@ -251,18 +250,18 @@ CHILL_FOR_TARGET = ` \ fi` CXX_FOR_TARGET = ` \ - if [ -f $$r/gcc/xgcc ] ; then \ + if [ -f $$r/gcc/g++ ] ; then \ if [ -f $$r/$(TARGET_SUBDIR)/newlib/Makefile ] ; then \ case "$(target_canonical)" in \ i[3456]86-*-cygwin*) \ - echo $$r/gcc/xgcc -B$$r/gcc/ -B$(build_tooldir)/bin/ -B$$r/$(TARGET_SUBDIR)/newlib/ -L$$r/$(TARGET_SUBDIR)/winsup -idirafter $$r/$(TARGET_SUBDIR)/newlib/targ-include -idirafter $$s/winsup/cygwin/include -idirafter $$s/winsup/w32api/include -idirafter $$s/newlib/libc/include -idirafter $$s/newlib/libc/sys/cygwin -idirafter $$s/newlib/libc/sys/cygwin32 -nostdinc; \ + echo $$r/gcc/g++ -B$(build_tooldir)/bin/ -B$$r/$(TARGET_SUBDIR)/newlib/ -B$$r/gcc/ -L$$r/$(TARGET_SUBDIR)/winsup -idirafter $$r/$(TARGET_SUBDIR)/newlib/targ-include -idirafter $$s/winsup/cygwin/include -idirafter $$s/winsup/w32api/include -idirafter $$s/newlib/libc/include -idirafter $$s/newlib/libc/sys/cygwin -idirafter $$s/newlib/libc/sys/cygwin32 -nostdinc -L$$r/$(TARGET_SUBDIR)/libstdc++; \ ;; \ *) \ - echo $$r/gcc/xgcc -B$$r/gcc/ -idirafter $$r/$(TARGET_SUBDIR)/newlib/targ-include -idirafter $$s/newlib/libc/include -nostdinc; \ + echo $$r/gcc/g++ -B$(build_tooldir)/bin/ -B$$r/$(TARGET_SUBDIR)/newlib/ -B$$r/gcc/ -idirafter $$r/$(TARGET_SUBDIR)/newlib/targ-include -idirafter $$s/newlib/libc/include -nostdinc -L$$r/$(TARGET_SUBDIR)/libstdc++; \ ;; \ esac \ else \ - echo $$r/gcc/g++ -B$(build_tooldir)/bin/ -B$(build_tooldir)/lib/ -B$$r/gcc/ -I$(build_tooldir)/include; \ + echo $$r/gcc/g++ -B$(build_tooldir)/bin/ -B$(build_tooldir)/lib/ -B$$r/gcc/ -isystem $(build_tooldir)/include -L$$r/$(TARGET_SUBDIR)/libstdc++; \ fi; \ else \ if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \ @@ -423,6 +422,7 @@ BASE_FLAGS_TO_PASS = \ "sharedstatedir=$(sharedstatedir)" \ "sysconfdir=$(sysconfdir)" \ "tooldir=$(tooldir)" \ + "build_tooldir=$(build_tooldir)" \ "gxx_include_dir=$(gxx_include_dir)" \ "gcc_version=$(gcc_version)" \ "gcc_version_trigger=$(gcc_version_trigger)" \ @@ -565,6 +565,7 @@ ALL_MODULES = \ all-send-pr \ all-shellutils \ all-sim \ + all-snavigator \ all-tar \ all-tcl \ all-tcl8.1 \ @@ -636,6 +637,7 @@ CROSS_CHECK_MODULES = \ check-sed \ check-send-pr \ check-shellutils \ + check-snavigator \ check-sim \ check-tar \ check-tcl \ @@ -711,8 +713,8 @@ INSTALL_MODULES = \ install-send-pr \ install-shellutils \ install-sim \ + install-snavigator \ install-tar \ - install-texinfo \ install-textutils \ install-tgas \ install-time \ @@ -766,9 +768,13 @@ INSTALL_X11_MODULES = \ ALL_TARGET_MODULES = \ all-target-libio \ all-target-libstdc++ \ + all-target-libstdc++-v3 \ all-target-librx \ all-target-libg++ \ all-target-newlib \ + all-target-libf2c \ + all-target-libchill \ + all-target-libobjc \ all-target-libtermcap \ all-target-winsup \ all-target-libgloss \ @@ -776,6 +782,11 @@ ALL_TARGET_MODULES = \ all-target-gperf \ all-target-examples \ all-target-libstub \ + all-target-libffi \ + all-target-libjava \ + all-target-zlib \ + all-target-boehm-gc \ + all-target-qthreads \ all-target-bsp \ all-target-cygmon @@ -784,9 +795,13 @@ ALL_TARGET_MODULES = \ CONFIGURE_TARGET_MODULES = \ configure-target-libio \ configure-target-libstdc++ \ + configure-target-libstdc++-v3 \ configure-target-librx \ configure-target-libg++ \ configure-target-newlib \ + configure-target-libf2c \ + configure-target-libchill \ + configure-target-libobjc \ configure-target-libtermcap \ configure-target-winsup \ configure-target-libgloss \ @@ -794,6 +809,11 @@ CONFIGURE_TARGET_MODULES = \ configure-target-gperf \ configure-target-examples \ configure-target-libstub \ + configure-target-libffi \ + configure-target-libjava \ + configure-target-zlib \ + configure-target-boehm-gc \ + configure-target-qthreads \ configure-target-bsp \ configure-target-cygmon @@ -802,10 +822,19 @@ CONFIGURE_TARGET_MODULES = \ CHECK_TARGET_MODULES = \ check-target-libio \ check-target-libstdc++ \ + check-target-libstdc++-v3 \ check-target-libg++ \ check-target-newlib \ + check-target-libf2c \ + check-target-libchill \ + check-target-libobjc \ check-target-winsup \ check-target-libiberty \ + check-target-libffi \ + check-target-libjava \ + check-target-zlib \ + check-target-boehm-gc \ + check-target-qthreads \ check-target-gperf # This is a list of the install targets for all of the modules which are @@ -813,13 +842,21 @@ CHECK_TARGET_MODULES = \ INSTALL_TARGET_MODULES = \ install-target-libio \ install-target-libstdc++ \ + install-target-libstdc++-v3 \ install-target-libg++ \ install-target-newlib \ + install-target-libf2c \ + install-target-libchill \ + install-target-libobjc \ install-target-libtermcap \ install-target-winsup \ install-target-libgloss \ install-target-libiberty \ install-target-bsp \ + install-target-libjava \ + install-target-zlib \ + install-target-boehm-gc \ + install-target-qthreads \ install-target-gperf # This is a list of the targets for which we can do a clean-{target}. @@ -877,6 +914,7 @@ CLEAN_MODULES = \ clean-send-pr \ clean-shellutils \ clean-sim \ + clean-snavigator \ clean-tar \ clean-tcl \ clean-texinfo \ @@ -891,15 +929,24 @@ CLEAN_MODULES = \ CLEAN_TARGET_MODULES = \ clean-target-libio \ clean-target-libstdc++ \ + clean-target-libstdc++-v3 \ clean-target-librx \ clean-target-libg++ \ clean-target-newlib \ + clean-target-libf2c \ + clean-target-libchill \ + clean-target-libobjc \ clean-target-winsup \ clean-target-libgloss \ clean-target-libiberty \ clean-target-gperf \ clean-target-examples \ clean-target-libstub \ + clean-target-libffi \ + clean-target-libjava \ + clean-target-zlib \ + clean-target-boehm-gc \ + clean-target-qthreads \ clean-target-bsp \ clean-target-cygmon @@ -1156,7 +1203,6 @@ gcc-no-fixedincludes: mv gcc/tmp-include gcc/include 2>/dev/null; \ else true; fi - # This rule is used to build the modules which use FLAGS_TO_PASS. To # build a target all-X means to cd to X and make all. # @@ -1535,6 +1581,8 @@ all-bash: all-bfd: all-libiberty all-intl all-binutils: all-libiberty all-opcodes all-bfd all-flex all-bison all-byacc all-intl all-bison: all-texinfo +configure-target-boehm-gc: configure-target-newlib configure-target-qthreads +all-target-boehm-gc: configure-target-boehm-gc configure-target-bsp: $(ALL_GCC) all-target-bsp: configure-target-bsp all-gcc all-binutils all-target-newlib all-byacc: @@ -1568,6 +1616,7 @@ all-gnuserv: configure-target-gperf: $(ALL_GCC) all-target-gperf: configure-target-gperf all-target-libiberty all-target-libstdc++ all-gprof: all-libiberty all-bfd all-opcodes all-intl +all-grep: all-libiberty all-grez: all-libiberty all-bfd all-opcodes all-gui: all-gdb all-libproc all-target-librx all-guile: @@ -1588,13 +1637,22 @@ all-target-libio: configure-target-libio all-gas all-ld all-gcc all-target-libib check-target-libio: all-libgui: all-tcl all-tk all-tcl8.1 all-tk8.1 all-itcl all-libiberty: +configure-target-libffi: $(ALL_GCC) +configure-target-libjava: $(ALL_GCC) configure-target-zlib configure-target-boehm-gc configure-target-qthreads configure-target-newlib configure-target-libffi +all-target-libffi: configure-target-libffi +all-target-libjava: configure-target-libjava all-gcc all-zip all-target-newlib all-target-zlib all-target-boehm-gc all-target-qthreads all-target-libffi configure-target-librx: $(ALL_GCC) configure-target-newlib all-target-librx: configure-target-librx configure-target-libstdc++: $(ALL_GCC) +configure-target-libstdc++-v3: $(ALL_GCC) all-target-libstdc++: configure-target-libstdc++ all-gas all-ld all-gcc all-target-libiberty all-target-newlib all-target-libio +all-target-libstdc++-v3: configure-target-libstdc++-v3 all-gas all-ld all-gcc all-target-libiberty all-target-newlib configure-target-libstub: $(ALL_GCC) all-target-libstub: configure-target-libstub all-libtool: +all-target-libf2c: configure-target-libf2c all-gas all-ld all-gcc all-target-libiberty all-target-newlib +all-target-libchill: configure-target-libchill all-gas all-ld all-gcc all-target-libiberty all-target-newlib +all-target-libobjc: configure-target-libobjc all-gas all-ld all-gcc all-target-libiberty all-target-newlib all-m4: all-libiberty all-make: all-libiberty all-mmalloc: @@ -1606,6 +1664,8 @@ all-opcodes: all-bfd all-libiberty all-patch: all-libiberty all-perl: all-prms: all-libiberty +configure-target-qthreads: configure-target-newlib +all-target-qthreads: configure-target-qthreads all-rcs: all-readline: all-recode: all-libiberty @@ -1613,6 +1673,7 @@ all-sed: all-libiberty all-send-pr: all-prms all-shellutils: all-sim: all-libiberty all-bfd all-opcodes all-readline +all-snavigator: all-tcl all-tk all-itcl all-db all-grep all-libgui all-tar: all-libiberty all-tcl: all-tcl8.1: @@ -1629,6 +1690,8 @@ all-target-winsup: all-target-newlib all-target-libiberty all-target-libtermcap configure-target-winsup: configure-target-newlib all-uudecode: all-libiberty all-zip: +configure-target-zlib: $(ALL_GCC) +all-target-zlib: configure-target-zlib configure-target-libiberty: $(ALL_GCC) configure-target-newlib all-target-libiberty: configure-target-libiberty all-gcc all-ld all-target-newlib all-target: $(ALL_TARGET_MODULES) diff --git a/config-ml.in b/config-ml.in index 503f7cf1a1..60b1d2c1f9 100644 --- a/config-ml.in +++ b/config-ml.in @@ -280,6 +280,17 @@ arm-*-*) esac done fi + if [ x"$enable_nofmult" = xno ] + then + old_multidirs="${multidirs}" + multidirs="" + for x in ${old_multidirs}; do + case "$x" in + *nofmult* ) : ;; + *) multidirs="${multidirs} ${x}" ;; + esac + done + fi ;; m68*-*-*) if [ x$enable_softfloat = xno ] @@ -362,6 +373,28 @@ mips*-*-*) esac done fi + case " $multidirs " in + *" mabi=64 "*) + # We will not be able to create libraries with -mabi=64 if + # we cannot even link a trivial program. It usually + # indicates the 64bit libraries are missing. + if echo 'main() {}' > conftest.c && + ${CC-gcc} -mabi=64 conftest.c -o conftest; then + : + else + echo Could not link program with -mabi=64, disabling it. + old_multidirs="${multidirs}" + multidirs="" + for x in ${old_multidirs}; do + case "$x" in + *mabi=64* ) : ;; + *) multidirs="${multidirs} ${x}" ;; + esac + done + fi + rm -f conftest.c conftest + ;; + esac ;; powerpc*-*-* | rs6000*-*-*) if [ x$enable_softfloat = xno ] @@ -442,6 +475,30 @@ powerpc*-*-* | rs6000*-*-*) done fi ;; +sparc*-*-*) + case " $multidirs " in + *" m64 "*) + # We will not be able to create libraries with -m64 if + # we cannot even link a trivial program. It usually + # indicates the 64bit libraries are missing. + if echo 'main() {}' > conftest.c && + ${CC-gcc} -m64 conftest.c -o conftest; then + : + else + echo Could not link program with -m64, disabling it. + old_multidirs="${multidirs}" + multidirs="" + for x in ${old_multidirs}; do + case "$x" in + *m64* ) : ;; + *) multidirs="${multidirs} ${x}" ;; + esac + done + fi + rm -f conftest.c conftest + ;; + esac + ;; esac # Remove extraneous blanks from multidirs. @@ -472,6 +529,8 @@ multi-do: flags=`echo $$i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; \ if (cd ../$${dir}/$${lib}; $(MAKE) $(FLAGS_TO_PASS) \ CFLAGS="$(CFLAGS) $${flags}" \ + prefix="$(prefix)" \ + exec_prefix="$(exec_prefix)" \ CXXFLAGS="$(CXXFLAGS) $${flags}" \ LIBCFLAGS="$(LIBCFLAGS) $${flags}" \ LIBCXXFLAGS="$(LIBCXXFLAGS) $${flags}" \ @@ -615,7 +674,24 @@ if [ -n "${multidirs}" ] && [ -z "${ml_norecursion}" ]; then echo "pwd: `pwd`" fi - if [ -d ${ml_dir} ]; then true; else mkdir ${ml_dir}; fi + if [ -d ${ml_dir} ]; then true; else + # ``mkdir -p ${ml_dir}'' See also mkinstalldirs. + pathcomp="" + for d in `echo ":${ml_dir}" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`; do + pathcomp="$pathcomp$d" + case "$pathcomp" in + -* ) pathcomp=./$pathcomp ;; + esac + if test ! -d "$pathcomp"; then + echo "mkdir $pathcomp" 1>&2 + mkdir "$pathcomp" > /dev/null 2>&1 || lasterr=$? + fi + if test ! -d "$pathcomp"; then + exit $lasterr + fi + pathcomp="$pathcomp/" + done + fi if [ -d ${ml_dir}/${ml_libdir} ]; then true; else mkdir ${ml_dir}/${ml_libdir}; fi # Eg: if ${ml_dir} = m68000/m68881, dotdot = ../../ @@ -668,7 +744,18 @@ if [ -n "${multidirs}" ] && [ -z "${ml_norecursion}" ]; then if [ -f ${ml_newsrcdir}/configure ]; then ml_recprog=${ml_newsrcdir}/configure fi - if eval ${ml_config_shell} ${ml_recprog} \ + + # find compiler flag corresponding to ${ml_dir} + for i in `${CC-gcc} --print-multi-lib 2>/dev/null`; do + dir=`echo $i | sed -e 's/;.*$//'` + if [ "${dir}" = "${ml_dir}" ]; then + flags=`echo $i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'` + break + fi + done + ml_config_env='CC="${CC} $flags"' + + if eval ${ml_config_env} ${ml_config_shell} ${ml_recprog} \ --with-multisubdir=${ml_dir} --with-multisrctop=${multisrctop} \ ${ml_arguments} ${ml_srcdiroption} ; then true diff --git a/config.if b/config.if index bcc026908d..625a4077ec 100644 --- a/config.if +++ b/config.if @@ -21,9 +21,15 @@ else if_topsrcdir=${top_srcdir} fi -if [ -f ${if_topsrcdir}/libstdc++/Makefile.in ]; then +if [ "${enable_libstdcxx_v3}" = "yes" ] ; then + libstdcxx_srcdir=${if_topsrcdir}/libstdc++-v3 +else + libstdcxx_srcdir=${if_topsrcdir}/libstdc++ +fi + +if [ -f ${libstdcxx_srcdir}/Makefile.in ]; then # We check libstdc++ for libstdcxx_interface. -libstdcxx_interface=`grep "^INTERFACE" ${if_topsrcdir}/libstdc++/Makefile.in | sed 's/INTERFACE[ ]*=[ ]*\(.*\)/\1/'` +libstdcxx_interface=`grep "^INTERFACE" ${libstdcxx_srcdir}/Makefile.in | sed 's/INTERFACE[ ]*=[ ]*\(.*\)/\1/'` else libstdcxx_interface= fi diff --git a/config/mh-ia64pic b/config/mh-ia64pic new file mode 100644 index 0000000000..92e48d90fb --- /dev/null +++ b/config/mh-ia64pic @@ -0,0 +1 @@ +PICFLAG=-fpic diff --git a/config/mt-ia64pic b/config/mt-ia64pic new file mode 100644 index 0000000000..ff98727557 --- /dev/null +++ b/config/mt-ia64pic @@ -0,0 +1 @@ +PICFLAG_FOR_TARGET=-fpic diff --git a/configure b/configure index 06bd1a1308..5bb72227d9 100755 --- a/configure +++ b/configure @@ -237,7 +237,7 @@ do esac enableopt=`echo ${option} | sed 's:^--::;s:=.*$::;s:-:_:g'` - eval "$enableopt='$optarg'" + eval "$enableopt=\$optarg" enableoptions="$enableoptions '$option'" ;; --exec-prefix* | --ex*) @@ -370,7 +370,7 @@ do esac withopt=`echo ${option} | sed 's:^--::;s:=.*$::;s:-:_:g'` - eval $withopt="$optarg" + eval $withopt="\$optarg" withoptions="$withoptions $option" ;; --without-*) @@ -576,7 +576,6 @@ case "${srcdir}" in fi esac - # default exec_prefix case "${exec_prefixoption}" in "") exec_prefix="\$(prefix)" ;; @@ -912,9 +911,10 @@ if [ "${build}" != "${host}" ]; then tools="${tools} HOST_PREFIX_1 LD LD_FOR_TARGET LEX MAKEINFO NM" tools="${tools} NM_FOR_TARGET RANLIB RANLIB_FOR_TARGET" tools="${tools} WINDRES WINDRES_FOR_TARGET YACC" + tools="${tools} OBJCOPY OBJDUMP" for var in ${tools}; do - if [ -z "`eval 'echo $'"${var}"`" ] && [ -r Makefile ]; then + if eval [ -z \"\$${var}\" ] && [ -r Makefile ]; then sed -n -e ':loop /\\$/ N s/\\\n//g @@ -923,7 +923,7 @@ t loop < Makefile > Makefile.v t=`tail -1 Makefile.v` if [ -n "${t}" ]; then - eval "${var}='${t}'" + eval "${var}=\${t}" fi rm -f Makefile.v fi @@ -955,6 +955,8 @@ t loop RANLIB_FOR_TARGET=${RANLIB_FOR_TARGET-${target_alias}-ranlib} WINDRES=${WINDRES-${host_alias}-windres} WINDRES_FOR_TARGET=${WINDRES_FOR_TARGET-${target_alias}-windres} + OBJCOPY=${OBJCOPY-${host_alias}-objcopy} + OBJDUMP=${OBJDUMP-${host_alias}-objdump} if [ -z "${YACC}" ]; then IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:" @@ -1005,6 +1007,8 @@ t loop export NM export RANLIB export WINDRES + export OBJCOPY + export OBJDUMP else # If CC is still not set, try to get gcc. if [ -z "${CC}" ]; then @@ -1408,6 +1412,7 @@ EOF -e "s:^program_suffix[ ]*=.*$:program_suffix = ${program_suffix}:" \ -e "s:^program_transform_name[ ]*=.*$:program_transform_name = ${program_transform_name}:" \ -e "s|^tooldir[ ]*=.*$|tooldir = ${tooldir}|" \ + -e "s|^build_tooldir[ ]*=.*$|build_tooldir = ${tooldir}|" \ -e "s:^DEFAULT_YACC[ ]*=.*$:DEFAULT_YACC = ${DEFAULT_YACC}:" \ -e "s:^DEFAULT_LEX[ ]*=.*$:DEFAULT_LEX = ${DEFAULT_LEX}:" \ -e "s:^DEFAULT_M4[ ]*=.*$:DEFAULT_M4 = ${DEFAULT_M4}:" \ @@ -1420,7 +1425,7 @@ EOF # tools. if [ "${build}" != "${host}" ]; then for var in ${tools}; do - val=`eval 'echo $'"${var}"` + eval val=\$${var} sed -e "/^${var}[ ]*=/{ :loop1 /\\\\$/ N diff --git a/configure.in b/configure.in index 3759cd88fb..f371c105e9 100644 --- a/configure.in +++ b/configure.in @@ -47,6 +47,13 @@ if [ "${enable_gdbgui}" = "yes" ] ; then host_libs="${host_libs} libgui" fi +# Set up configure/Makefile variables if libstdc++-v3 is to be built. +if [ "${enable_libstdcxx_v3}" = "yes" ] ; then + libstdcxx_version="target-libstdc++-v3" +else + libstdcxx_version="target-libio target-libstdc++" +fi + # these tools are built for the host environment # Note, the powerpc-eabi build depends on sim occurring before gdb in order to # know that we are building the simulator. @@ -58,10 +65,15 @@ host_tools="texinfo byacc flex bison binutils ld gas gcc sim gdb make patch prms target_libs="target-libiberty \ target-libgloss \ target-newlib \ - target-libio \ - target-librx \ - target-libstdc++ \ - target-libg++" + ${libstdcxx_version} \ + target-libf2c \ + target-libchill \ + target-libffi \ + target-libjava \ + target-zlib \ + target-boehm-gc \ + target-qthreads \ + target-libobjc" # these tools are built using the target libs, and are intended to run only # in the target environment @@ -154,6 +166,9 @@ case "${host}" in mips*-*-sysv*) host_makefile_frag="${host_makefile_frag} config/mh-riscos" ;; + i370-ibm-opened*) + host_makefile_frag="${host_makefile_frag} config/mh-openedition" + ;; i[3456]86-*-sysv5*) host_makefile_frag="${host_makefile_frag} config/mh-sysv5" ;; @@ -291,6 +306,9 @@ if [ x${shared} = xyes ]; then i370-*-*) host_makefile_frag="${host_makefile_frag} config/mh-i370pic" ;; + ia64-*-*) + host_makefile_frag="${host_makefile_frag} config/mh-ia64pic" + ;; sparc64-*-*) host_makefile_frag="${host_makefile_frag} config/mh-sparcpic" ;; @@ -524,7 +542,7 @@ case "${host}" in noconfigdirs="tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl apache inet itcl tix db snavigator gnuserv gettext" ;; i[3456]86-*-go32* | i[3456]86-*-msdosdjgpp*) - noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl apache inet itcl tix db snavigator gnuserv gettext" + noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl apache inet itcl tix db snavigator gnuserv gettext libffi" ;; i[3456]86-*-mingw32*) # noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl apache inet itcl tix db snavigator gnuserv" @@ -542,18 +560,21 @@ case "${host}" in ppc*-*-pe) noconfigdirs="patch diff make tk tcl expect dejagnu cvssrc autoconf automake texinfo bison send-pr gprof rcs guile perl apache inet itcl tix db snavigator gnuserv" ;; + powerpc-*-beos*) + noconfigdirs="$noconfigdirs tk itcl tix libgui gdb dejagnu readline" + ;; esac case "${target}" in *-*-netware) - noconfigdirs="$noconfigdirs target-libg++ target-libstdc++ target-librx target-newlib target-libiberty target-libgloss" + noconfigdirs="$noconfigdirs ${libstdcxx_version} target-newlib target-libiberty target-libgloss target-libffi" ;; *-*-rtems*) - noconfigdirs="$noconfigdirs target-libgloss" + noconfigdirs="$noconfigdirs target-libgloss target-libffi" ;; *-*-vxworks*) - noconfigdirs="$noconfigdirs target-newlib target-libgloss" + noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libffi" ;; alpha*-dec-osf*) # ld works, but does not support shared libraries. emacs doesn't @@ -562,13 +583,7 @@ case "${target}" in noconfigdirs="$noconfigdirs gas ld emacs fileutils target-newlib target-libgloss" ;; alpha*-*-*vms*) - noconfigdirs="$noconfigdirs gdb ld target-newlib target-libgloss" - ;; - alpha*-*-linux*) - # newlib is not 64 bit ready - noconfigdirs="$noconfigdirs target-newlib target-libgloss" - # linux has rx in libc - skipdirs="$skipdirs target-librx" + noconfigdirs="$noconfigdirs gdb ld target-newlib target-libgloss target-libffi" ;; alpha*-*-*) # newlib is not 64 bit ready @@ -577,20 +592,20 @@ case "${target}" in sh*-*-pe|mips*-*-pe|*arm-wince-pe) noconfigdirs="$noconfigdirs target-libjava target-libffi target-zlib" noconfigdirs="$noconfigdirs target-boehm-gc target-qthreads target-examples" - noconfigdirs="$noconfigdirs target-librx target-libiberty texinfo send-pr" + noconfigdirs="$noconfigdirs target-libiberty texinfo send-pr" noconfigdirs="$noconfigdirs tcl tix tk itcl libgui sim" noconfigdirs="$noconfigdirs expect dejagnu" # the C++ libraries don't build on top of CE's C libraries - noconfigdirs="$noconfigdirs target-libg++ target-libstdc++ target-libio" + noconfigdirs="$noconfigdirs ${libstdcxx_version}" skipdirs="$skipdirs target-newlib" case "${host}" in *-*-cygwin*) ;; # keep gdb and readline - *) noconfigdirs="$noconfigdirs gdb readline target-libio target-libstdc++ target-libg++" + *) noconfigdirs="$noconfigdirs gdb readline ${libstdcxx_version}" ;; esac ;; arc-*-*) - noconfigdirs="$noconfigdirs target-libgloss" + noconfigdirs="$noconfigdirs target-libgloss target-libffi" ;; arm-*-pe*) noconfigdirs="$noconfigdirs target-libgloss" @@ -608,43 +623,43 @@ case "${target}" in fi ;; arm-*-oabi*) - noconfigdirs="$noconfigdirs target-libgloss" + noconfigdirs="$noconfigdirs target-libgloss target-libffi" ;; c4x-*-*) - noconfigdirs="$noconfigdirs target-libg++ target-libstdc++ target-libio target-librx target-libgloss" + noconfigdirs="$noconfigdirs ${libstdcxx_version} target-libgloss target-libffi" ;; c54x*-*-* | tic54x-*-*) - noconfigdirs="$noconfigdirs target-libg++ target-libstdc++ target-libio target-librx target-libgloss gcc gdb newlib" + noconfigdirs="$noconfigdirs ${libstdcxx_version} target-libgloss target-libffi gcc gdb newlib" ;; thumb-*-coff) - noconfigdirs="$noconfigdirs target-libgloss" + noconfigdirs="$noconfigdirs target-libgloss target-libffi" ;; thumb-*-elf) - noconfigdirs="$noconfigdirs target-libgloss" + noconfigdirs="$noconfigdirs target-libgloss target-libffi" ;; thumb-*-oabi) - noconfigdirs="$noconfigdirs target-libgloss" + noconfigdirs="$noconfigdirs target-libgloss target-libffi" ;; strongarm-*-elf) - noconfigdirs="$noconfigdirs target-libgloss" + noconfigdirs="$noconfigdirs target-libgloss target-libffi" if [ x${is_cross_compiler} != xno ] ; then target_configdirs="${target_configdirs} target-bsp target-cygmon" fi ;; strongarm-*-coff) - noconfigdirs="$noconfigdirs target-libgloss" + noconfigdirs="$noconfigdirs target-libgloss target-libffi" if [ x${is_cross_compiler} != xno ] ; then target_configdirs="${target_configdirs} target-bsp target-cygmon" fi ;; thumb-*-pe) - noconfigdirs="$noconfigdirs target-libgloss" + noconfigdirs="$noconfigdirs target-libgloss target-libffi" ;; arm-*-riscix*) - noconfigdirs="$noconfigdirs ld target-libgloss" + noconfigdirs="$noconfigdirs ld target-libgloss target-libffi" ;; d10v-*-*) - noconfigdirs="$noconfigdirs target-librx target-libg++ target-libstdc++ target-libio" + noconfigdirs="$noconfigdirs ${libstdcxx_version} target-libgloss target-libffi" ;; d30v-*-*) ;; @@ -655,13 +670,13 @@ case "${target}" in ;; h8300*-*-* | \ h8500-*-*) - noconfigdirs="$noconfigdirs target-libg++ target-libstdc++ target-libio target-librx target-libgloss" + noconfigdirs="$noconfigdirs ${libstdcxx_version} target-libgloss target-libffi" ;; hppa*-*-*elf* | \ hppa*-*-linux-gnu* | \ hppa*-*-lites* | \ hppa*64*-*-*) - # Do configure ld/binutils/gas for the above cases. + # Do configure ld/binutils/gas for this case. ;; hppa*-*-*) # HP's C compiler doesn't handle Emacs correctly (but on BSD and Mach @@ -684,11 +699,11 @@ case "${target}" in ;; i[3456]86-*-go32* | i[3456]-*-msdosdjgpp*) # but don't build gdb - noconfigdirs="$noconfigdirs gdb target-libg++ target-libstdc++ target-libio target-librx" + noconfigdirs="$noconfigdirs gdb ${libstdcxx_version} target-libffi" ;; i[3456]86-*-mingw32*) target_configdirs="$target_configdirs target-mingw" - noconfigdirs="$noconfigdirs expect target-libgloss" + noconfigdirs="$noconfigdirs expect target-libgloss target-libffi" # Can't build gdb for mingw32 if not native. case "${host}" in @@ -699,7 +714,7 @@ case "${target}" in ;; *-*-cygwin*) target_configdirs="$target_configdirs target-libtermcap target-winsup" - noconfigdirs="$noconfigdirs target-libgloss" + noconfigdirs="$noconfigdirs target-gperf target-libgloss target-libffi" # always build newlib. skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'` @@ -711,15 +726,15 @@ case "${target}" in esac ;; i[3456]86-*-pe) - noconfigdirs="$noconfigdirs target-libg++ target-libstdc++ target-libio target-librx target-libgloss" + noconfigdirs="$noconfigdirs ${libstdcxx_version} target-libgloss target-libffi" ;; i[3456]86-*-sco3.2v5*) # The linker does not yet know about weak symbols in COFF, # and is not configured to handle mixed ELF and COFF. - noconfigdirs="$noconfigdirs ld target-libgloss" + noconfigdirs="$noconfigdirs ld target-libgloss target-libffi" ;; i[3456]86-*-sco*) - noconfigdirs="$noconfigdirs gprof target-libgloss" + noconfigdirs="$noconfigdirs gprof target-libgloss target-libffi" ;; i[3456]86-*-solaris2*) noconfigdirs="$noconfigdirs target-libgloss" @@ -731,7 +746,7 @@ case "${target}" in *) ;; esac # but that's okay since emacs doesn't work anyway - noconfigdirs="$noconfigdirs emacs emacs19 target-libgloss" + noconfigdirs="$noconfigdirs emacs emacs19 target-libgloss target-libffi" ;; i[3456]86-*-beos*) noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss" @@ -747,13 +762,13 @@ case "${target}" in fi ;; mn10200-*-*) - noconfigdirs="$noconfigdirs" + noconfigdirs="$noconfigdirs target-libffi" if [ x${is_cross_compiler} != xno ] ; then target_configdirs="${target_configdirs} target-libstub target-cygmon" fi ;; mn10300-*-*) - noconfigdirs="$noconfigdirs" + noconfigdirs="$noconfigdirs target-libffi" if [ x${is_cross_compiler} != xno ] ; then target_configdirs="${target_configdirs} target-bsp target-libstub target-cygmon" fi @@ -764,18 +779,21 @@ case "${target}" in # GNU ld is known to be broken for AIX 4.2 and 4.3 (at least) # The symptom is that GDBtk 4.18 fails at startup with a segfault # if linked by GNU ld, but not if linked by the native ld. - noconfigdirs="$noconfigdirs gprof cvssrc target-libgloss ld" + noconfigdirs="$noconfigdirs gprof cvssrc target-libgloss target-libffi ld" use_gnu_ld=no ;; powerpc*-*-winnt* | powerpc*-*-pe* | ppc*-*-pe) target_configdirs="$target_configdirs target-winsup" - noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss itcl tix db snavigator gnuserv" + noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss itcl tix db snavigator gnuserv target-libffi" # always build newlib. skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'` ;; # This is temporary until we can link against shared libraries powerpcle-*-solaris*) - noconfigdirs="$noconfigdirs gdb sim make tcl tk expect itcl tix db snavigator gnuserv" + noconfigdirs="$noconfigdirs gdb sim make tcl tk expect itcl tix db snavigator gnuserv target-libffi" + ;; + powerpc-*-beos*) + noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss" ;; powerpc-*-eabi) if [ x${is_cross_compiler} != xno ] ; then @@ -784,22 +802,21 @@ case "${target}" in ;; rs6000-*-lynxos*) # The CVS server code doesn't work on the RS/6000 - # Newlib makes problems for libg++ in crosses. - noconfigdirs="$noconfigdirs target-newlib gprof cvssrc" + noconfigdirs="$noconfigdirs target-newlib gprof cvssrc target-libffi" ;; rs6000-*-aix*) # The configure and build of ld are currently disabled because # GNU ld is known to be broken for AIX 4.2 and 4.3 (at least) # The symptom is that GDBtk 4.18 fails at startup with a segfault # if linked by GNU ld, but not if linked by the native ld. - noconfigdirs="$noconfigdirs gprof ld" + noconfigdirs="$noconfigdirs gprof target-libffi ld" use_gnu_ld=no ;; rs6000-*-*) - noconfigdirs="$noconfigdirs gprof" + noconfigdirs="$noconfigdirs gprof target-libffi" ;; m68k-apollo-*) - noconfigdirs="$noconfigdirs ld binutils gprof target-libgloss" + noconfigdirs="$noconfigdirs ld binutils gprof target-libgloss target-libffi" ;; mips*-*-irix5*) # The GNU linker does not support shared libraries. @@ -811,26 +828,21 @@ case "${target}" in # emacs is emacs 18, which does not work on Irix 5 (emacs19 does work) noconfigdirs="$noconfigdirs gas gprof emacs target-libgloss" ;; - mips*-*-linux*) - noconfigdirs="$noconfigdirs gprof" - # linux has rx in libc - skipdirs="$skipdirs target-librx" - ;; mips*-dec-bsd*) - noconfigdirs="$noconfigdirs gprof target-libgloss" + noconfigdirs="$noconfigdirs gprof target-libgloss target-libffi" ;; mips*-*-bsd*) - noconfigdirs="$noconfigdirs gprof target-libgloss" + noconfigdirs="$noconfigdirs gprof target-libgloss target-libffi" ;; mipstx39-*-*) - noconfigdirs="$noconfigdirs gprof" # same as generic mips + noconfigdirs="$noconfigdirs gprof target-libffi" # same as generic mips target_configdirs="${target_configdirs} target-bsp target-libstub target-cygmon" ;; mips*-*-*) - noconfigdirs="$noconfigdirs gprof" + noconfigdirs="$noconfigdirs gprof target-libffi" ;; romp-*-*) - noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss" + noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss target-libffi" ;; sh-*-*) case "${host}" in @@ -839,7 +851,7 @@ case "${target}" in i[3456]86-*-msdosdjgpp*) ;; # don't add gprof back in *) skipdirs=`echo " ${skipdirs} " | sed -e 's/ gprof / /'` ;; esac - noconfigdirs="$noconfigdirs target-libgloss" + noconfigdirs="$noconfigdirs target-libgloss target-libffi" ;; sparc-*-elf*) if [ x${is_cross_compiler} != xno ] ; then @@ -850,11 +862,13 @@ case "${target}" in if [ x${is_cross_compiler} != xno ] ; then target_configdirs="${target_configdirs} target-libstub target-cygmon" fi + noconfigdirs="target-libffi" ;; sparclite-*-*) if [ x${is_cross_compiler} != xno ] ; then target_configdirs="${target_configdirs} target-bsp target-libstub target-cygmon" fi + noconfigdirs="target-libffi" ;; sparc-*-sunos4*) if [ x${is_cross_compiler} != xno ] ; then @@ -864,35 +878,31 @@ case "${target}" in fi ;; v810-*-*) - noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld target-libio target-libg++ target-libstdc++ opcodes target-libgloss" + noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld ${libstdcxx_version} opcodes target-libgloss target-libffi" ;; v850-*-*) - noconfigdirs="$noconfigdirs target-libgloss" + noconfigdirs="$noconfigdirs target-libgloss target-libffi" ;; v850e-*-*) - noconfigdirs="$noconfigdirs target-libgloss" + noconfigdirs="$noconfigdirs target-libgloss target-libffi" ;; v850ea-*-*) - noconfigdirs="$noconfigdirs target-libgloss" + noconfigdirs="$noconfigdirs target-libgloss target-libffi" ;; vax-*-vms) - noconfigdirs="$noconfigdirs bfd binutils gdb ld target-newlib opcodes target-libgloss" + noconfigdirs="$noconfigdirs bfd binutils gdb ld target-newlib opcodes target-libgloss target-libffi" ;; vax-*-*) - noconfigdirs="$noconfigdirs target-newlib target-libgloss" - ;; - *-*-linux*) - # linux has rx in libc - skipdirs="$skipdirs target-librx" + noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libffi" ;; *-*-lynxos*) - # Newlib makes problems for libg++ in crosses. - noconfigdirs="$noconfigdirs target-newlib target-libgloss" + noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libffi" ;; *-*-macos* | \ *-*-mpw*) # Macs want a resource compiler. configdirs="$configdirs grez" + noconfigdirs="target-libffi" ;; esac @@ -1176,7 +1186,7 @@ fi # provide a proper gxx_include_dir. # Note, if you change the default, make sure to fix both here and in -# the gcc, libio, libstdc++ and libg++ subdirectories. +# the gcc, libio, and libstdc++ subdirectories. # Check whether --with-gxx-include-dir or --without-gxx-include-dir was given. gxx_include_dir= if test -n "${with_gxx_include_dir}"; then