* elf32-arm.c (elf_backend_default_use_rela_p): Define to zero for

SymbianOS.

	* emulparams/armsymbian.sh (OTHER_READONLY_SECTIONS): Define, so
	as to include .ARM.exidx$${Base,Limit}.
	* ld/scripttempl/armbpabi.sc: Move .plt to end of text segment.
	Define IMAGE$$ER_RO$${Base,Limit} and SHT$$INIT_ARRAY$${Base,Limit}.
	Put .init_array, .fini_array, etc. into the read-only data
	segment.

bfd/ChangeLog

@@ -1,3 +1,8 @@
+2005-01-25  Mark Mitchell  <mark@codesourcery.com>
+
+	* elf32-arm.c (elf_backend_default_use_rela_p): Define to zero for
+	SymbianOS. 
+
 2005-01-25  Alexandre Oliva  <aoliva@redhat.com>
 
 	2004-12-10  Alexandre Oliva  <aoliva@redhat.com>

bfd/elf32-arm.c

@@ -5917,7 +5917,7 @@ elf32_arm_symbian_modify_segment_map (bfd *abfd,
 #undef elf_backend_may_use_rela_p
 #define elf_backend_may_use_rela_p  0
 #undef elf_backend_default_use_rela_p
-#define elf_backend_default_use_rela_p 1
+#define elf_backend_default_use_rela_p 0
 #undef elf_backend_rela_normal
 #define elf_backend_rela_normal     0
 

ld/ChangeLog

@@ -1,3 +1,12 @@
+2005-01-25  Mark Mitchell  <mark@codesourcery.com>
+
+	* emulparams/armsymbian.sh (OTHER_READONLY_SECTIONS): Define, so
+	as to include .ARM.exidx$${Base,Limit}.
+	* ld/scripttempl/armbpabi.sc: Move .plt to end of text segment.
+	Define IMAGE$$ER_RO$${Base,Limit} and SHT$$INIT_ARRAY$${Base,Limit}.
+	Put .init_array, .fini_array, etc. into the read-only data
+	segment. 
+	
 2005-01-25  Alan Modra  <amodra@bigpond.net.au>
 
 	* emultempl/elf32.em (gld${EMULATION_NAME}_try_needed): Formatting.

ld/emulparams/armsymbian.sh

@@ -9,6 +9,16 @@ TARGET2_TYPE=abs
 # On BPABI systems, program headers should not be mapped.
 EMBEDDED=yes
 
+# As for armelf.sh, but add the SymbianOS-specific
+# .ARM.exidx$${Base,Limit} symbols.
+OTHER_READONLY_SECTIONS="
+  .ARM.extab ${RELOCATING-0} : { *(.ARM.extab${RELOCATING+* .gnu.linkonce.armextab.*}) }
+  ${RELOCATING+ .ARM.exidx\$\$Base = . ; }
+  ${RELOCATING+ __exidx_start = .; }
+  .ARM.exidx ${RELOCATING-0} : { *(.ARM.exidx${RELOCATING+* .gnu.linkonce.armexidx.*}) }
+  ${RELOCATING+ __exidx_end = .; }
+  ${RELOCATING+ .ARM.exidx\$\$Limit = . ; }"
+
 # This value should match ELF_MAXPAGESIZE in BFD.  Otherwise, elf.c
 # will not place read-write sections in a separate ELF segment from
 # the read-only sections.

ld/scripttempl/armbpabi.sc

@@ -137,7 +137,10 @@ ${RELOCATING- /* For some reason, the Solaris linker makes bad executables
 SECTIONS
 {
   /* Read-only sections, merged into text segment: */
-  ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+PROVIDE (__executable_start = ${TEXT_START_ADDR}); . = ${TEXT_BASE_ADDRESS};}}}
+  ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+PROVIDE (__executable_start = ${TEXT_START_ADDR});}}}
+  /* SymbianOS uses this symbol.  */
+  ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+PROVIDE (Image\$\$ER_RO\$\$Base = ${TEXT_START_ADDR});}}} 
+  ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+ . = ${TEXT_BASE_ADDRESS};}}}
   ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_BASE_ADDRESS};}}
   ${CREATE_PIE+${RELOCATING+. = ${SHLIB_BASE_ADDRESS};}}
   ${INITIAL_READONLY_SECTIONS}
@@ -150,8 +153,6 @@ cat <<EOF
     KEEP (*(.init))
     ${RELOCATING+${INIT_END}}
   } =${NOP-0}
-
-  ${DATA_PLT-${BSS_PLT-${PLT}}}
   .text         ${RELOCATING-0} :
   {
     ${RELOCATING+${TEXT_START_SYMBOLS}}
@@ -167,13 +168,44 @@ cat <<EOF
     KEEP (*(.fini))
     ${RELOCATING+${FINI_END}}
   } =${NOP-0}
+  /* The SymbianOS kernel requires that the PLT go at the end of the
+     text section.  */
+  ${DATA_PLT-${BSS_PLT-${PLT}}}
   ${RELOCATING+PROVIDE (__etext = .);}
   ${RELOCATING+PROVIDE (_etext = .);}
   ${RELOCATING+PROVIDE (etext = .);}
+  /* SymbianOS uses this symbol.  */
+  ${RELOCATING+PROVIDE (Image\$\$ER_RO\$\$Limit = .);}
   ${WRITABLE_RODATA-${RODATA}}
   .rodata1      ${RELOCATING-0} : { *(.rodata1) }
   ${CREATE_SHLIB-${SDATA2}}
   ${CREATE_SHLIB-${SBSS2}}
+
+  /* On SymbianOS, put  .init_array and friends in the read-only
+     segment; there is no runtime relocation applied to these
+     arrays.  */
+
+  /* Ensure the __preinit_array_start label is properly aligned.  We
+     could instead move the label definition inside the section, but
+     the linker would then create the section even if it turns out to
+     be empty, which isn't pretty.  */
+  ${RELOCATING+. = ALIGN(${ALIGNMENT});}
+  ${RELOCATING+${CREATE_SHLIB-PROVIDE (__preinit_array_start = .);}}
+  .preinit_array   ${RELOCATING-0} : { *(.preinit_array) }
+  ${RELOCATING+${CREATE_SHLIB-PROVIDE (__preinit_array_end = .);}}
+
+  ${RELOCATING+${CREATE_SHLIB-PROVIDE (__init_array_start = .);}}
+  /* SymbianOS uses this symbol.  */
+  ${RELOCATING+${CREATE_SHLIB-PROVIDE (SHT\$\$INIT_ARRAY\$\$Base = .);}}
+  .init_array   ${RELOCATING-0} : { *(.init_array) }
+  /* SymbianOS uses this symbol.  */
+  ${RELOCATING+${CREATE_SHLIB-PROVIDE (SHT\$\$INIT_ARRAY\$\$Limit = .);}}
+  ${RELOCATING+${CREATE_SHLIB-PROVIDE (__init_array_end = .);}}
+
+  ${RELOCATING+${CREATE_SHLIB-PROVIDE (__fini_array_start = .);}}
+  .fini_array   ${RELOCATING-0} : { *(.fini_array) }
+  ${RELOCATING+${CREATE_SHLIB-PROVIDE (__fini_array_end = .);}}
+
   ${OTHER_READONLY_SECTIONS}
   .eh_frame_hdr : { *(.eh_frame_hdr) }
   .eh_frame     ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.eh_frame)) }
@@ -193,23 +225,6 @@ cat <<EOF
   .tdata	${RELOCATING-0} : { *(.tdata${RELOCATING+ .tdata.* .gnu.linkonce.td.*}) }
   .tbss		${RELOCATING-0} : { *(.tbss${RELOCATING+ .tbss.* .gnu.linkonce.tb.*})${RELOCATING+ *(.tcommon)} }
 
-  /* Ensure the __preinit_array_start label is properly aligned.  We
-     could instead move the label definition inside the section, but
-     the linker would then create the section even if it turns out to
-     be empty, which isn't pretty.  */
-  ${RELOCATING+. = ALIGN(${ALIGNMENT});}
-  ${RELOCATING+${CREATE_SHLIB-PROVIDE (__preinit_array_start = .);}}
-  .preinit_array   ${RELOCATING-0} : { *(.preinit_array) }
-  ${RELOCATING+${CREATE_SHLIB-PROVIDE (__preinit_array_end = .);}}
-
-  ${RELOCATING+${CREATE_SHLIB-PROVIDE (__init_array_start = .);}}
-  .init_array   ${RELOCATING-0} : { *(.init_array) }
-  ${RELOCATING+${CREATE_SHLIB-PROVIDE (__init_array_end = .);}}
-
-  ${RELOCATING+${CREATE_SHLIB-PROVIDE (__fini_array_start = .);}}
-  .fini_array   ${RELOCATING-0} : { *(.fini_array) }
-  ${RELOCATING+${CREATE_SHLIB-PROVIDE (__fini_array_end = .);}}
-
   ${RELOCATING+${CTOR}}
   ${RELOCATING+${DTOR}}
   .jcr          ${RELOCATING-0} : { KEEP (*(.jcr)) }