PR binutils/20930
* objcopy.c (mark_symbols_used_in_relocations): Check for a null
symbol pointer pointer before attempting to mark the symbol as
kept.
The objcopy and strip tools make use of the bfd library to manipulate
the state of the input file (to produce an output file). Within the
input file (for ELF at least), relocations are held within a section,
and so, if the user wanted to remove the relocations, but keep the
section to which the relocations would have been applied, it is tempting
to think that specifying the name of a relocation section to objcopy's
--remove-section option might do what you want, for example:
objcopy --remove-section=.rela.text input.elf output.elf
However, this does not work. The reason is that when the input file is
loaded, relocations are not managed as sections, but are, instead,
loaded as data associated with the section to which the relocations
would be applied. In our example above the relocations in '.rela.text'
are held as data on the section '.text' once 'input.elf' is loaded.
One task that objcopy and strip do is copy the relocations from the
input file to the output file if the section is also being copied from
the input file to the output file.
This commit adds a new command line option for objcopy and strip,
--remove-relocations, which can be used to remove the relocations, while
keeping the section that the relocations would have been applied to, for
example:
objcopy --remove-relocations=.text input.elf output.elf
in this case the section '.text' will appear in both 'input.elf' and
'output.elf', but any relocations in 'input.elf' that apply to '.text'
will not be present in 'output.elf'.
I have also added a special case to the handling of --remove-section
that spots if a user tries to remove a relocation section (currently
this is done by spotting the '.rela.' or '.rel.' prefix) and forwards
the request to --remove-relocations.
As with --remove-section and --only-section the --remove-relocations
option supports the '!' prefix on the section-patterns it takes to allow
for sections to be specifically not matched.
There are tests for all the new functionality.
binutils/ChangeLog:
* doc/binutils.texi (objcopy): Document 'remove-relocations'.
(strip): Likewise.
* objcopy.c (SECTION_CONTEXT_REMOVE_RELOCS): Define.
(enum command_line_switch): Add 'OPTION_REMOVE_RELOCS'.
(struct option strip_options): Add 'remove-relocations'.
(struct option copy_options): Likewise.
(copy_usage): Likewise.
(strip_usage): Likewise.
(handle_remove_relocations_option): New function.
(discard_relocations): New function.
(handle_remove_section_option): New function.
(copy_relocations_in_section): Use discard_relocations.
(strip_main): Use handle_remove_section_option for
'remove-section', and handle 'remove-relocations' option.
(copy_main): Likewise.
* testsuite/binutils-all/objcopy.exp: Run new tests.
* testsuite/binutils-all/remove-relocs-01.d: New file.
* testsuite/binutils-all/remove-relocs-01.s: New file.
* testsuite/binutils-all/remove-relocs-02.d: New file.
* testsuite/binutils-all/remove-relocs-03.d: New file.
* testsuite/binutils-all/remove-relocs-04.d: New file.
* testsuite/binutils-all/remove-relocs-05.d: New file.
* testsuite/binutils-all/remove-relocs-06.d: New file.
For symbol matching, prefixing a pattern with '!' will indicate a
non-matching pattern, however, this is not the case for section
patterns. As a result it is not possible to say "apply this action to
all sections except ...".
With this commit the objcopy and strip tools now support '!' prefix for
section patterns, so we can say:
objcopy --remove-section="*" --remove-section="!.text*"
Which will remove all sections, except those matching the pattern
'.text*'.
binutils/ChangeLog:
* objcopy.c (find_section_list): Handle section patterns starting
with '!' being a non-matching pattern.
* doc/binutils.texi (objcopy): Give example of using '!' with
--remove-section and --only-section.
(strip): Give example of using '!' with --remove-section.
* testsuite/binutils-all/data-sections.s: New file.
* testsuite/binutils-all/only-section-01.d: New file.
* testsuite/binutils-all/remove-section-01.d: New file.
* testsuite/binutils-all/objcopy.exp: Run new tests.
* NEWS: Mention new feature.
Some MIPS targets use a named section symbol rather than a symbol with
no name as is used with most ELF targets. When renaming sections, the
named section symbol needs to be renamed too.
Rather than fix this bug, I'd originally intended to just correct the
xfail added recently for update-1.o vs update4.o in update-section.exp,
using the same set of targets for the localize-hidden-1 mips xfail.
I'd extracted that target test into a new function, is_bad_symtab. It
turns out to be useful in readelf.exp too.
bfd/
* config.bfd: Delete mips vxworks patterns matched earlier.
Combine mips*-*-none with mips*-*-elf*.
binutils/
* objcopy.c (find_section_rename): Forward declare. Remove
ibfd and sec_ptr param. Add old_name param. Allow for NULL
returned_flags. Move read of section name and flags to..
(setup_section): ..here. Update find_section_rename call.
(filter_symbols): Rename section symbols for renamed sections.
(copy_object): Call filter_symbols when renamed sections.
* testsuite/lib/binutils-common.exp (is_bad_symtab): New.
* testsuite/binutils-all/update-section.exp: Revert 96037eb0
mips xfail.
* testsuite/binutils-all/objcopy.exp (copy_executable): Use
is_bad_symtab.
(localize-hidden-1): xfail if is_bad_symtab.
* testsuite/binutils-all/readelf.exp: Use is_bad_symtab to select
between mips/tmips.
PR binutils/19104
binutils * objcopy.c (command_line_switch): Add OPTION_ADD_SYMBOL.
(copy_options): Add add-symbol.
(copy_usage): Likewise.
(parse_symflags): New function.
(need_sym_before): New function.
(create_new_symbol): New function.
(filter_symbols): Add code to insert new symbols.
(copy_main): Process OPTION_ADD_SYMBOL.
* doc/binutils.texi: Document new feature.
* NEWS: Add note about the new feature.
tests * binutils-all/add-symbol.d: New test.
* binutils-all/objcopy.exp: Run the new test.
Calling bfd_copy_private_bfd_data is necessary to copy ELF file header
info.
binutils/
* objcopy.c (copy_object): Don't omit bfd_copy_private_bfd_data
call when extract_symbol.
bfd/
* elf32-v850.c (v850_elf_copy_private_bfd_data): Remove assertion
that input and output .note.renesas sections are same size.
Instead, only copy input to output if they are.
We can't use the output section size to copy input section since
--interleave will shrink the output section. Instead, we change
bfd_convert_section_contents to return the updated input section
size. When we do that, we don't need to adjust the output section
size to skip gap fills.
bfd/
PR binutils/19020
* bfd.c (bfd_convert_section_contents): Add ptr_size parameter.
* bfd-in2.h: Regenerated.
binutils/
PR binutils/19020
* objcopy.c (copy_object): Don't adjust the output section size
when copying from input sections.
(copy_section): Use input section size for the copy. Get the
updated section size from bfd_convert_section_contents.
binutils/testsuite/
PR binutils/19020
* binutils-all/objcopy.exp: Run pr19020a and pr19020b.
* lib/utils-lib.exp (run_dump_test): Support binary input.
* binutils-all/pr19020.in: New file.
* binutils-all/pr19020a.d: Likewise.
* binutils-all/pr19020b.d: Likewise.
In objcopy, copy_object calls copy_section to copy contents of input
section to output section. When --gap-fill= is used, objcopy extends
the size of output sectios to fill gaps between output sections with
gap fills. In this case, we adjust the output section size to skip
gap files to avoid reading beypond the input section buffer before
calling copy_section and restore the output section size after input
sections have been copied.
binutils/
PR binutils/19005
* objcopy.c (copy_object): Adjust the output section size to
skip gap fills between sections when copying from input sections
to output sections.
ld/testsuite/
PR binutils/19005
* ld-elf/pr19005.d: New file.
* ld-elf/pr19005.s: Likewise.
* ld-elf/pr19005.t: Likewise.
When using options such as --localize-symbol, --globalize-symbol, etc,
along with the --wildcard option, prefixing a symbol name with '!'
should provide non-matching behaviour, as example the following example
is given in the manual:
--wildcard --weaken-symbol !foo --weaken-symbol fo*
which should weaken all symbols matching the pattern 'fo*', but not the
symbol 'foo'.
However, this currently does not work, the current logic will waken all
symbols matching the pattern 'fo*' AND all symbols that are not 'foo'.
The symbol 'foo' is covered by the first condition, and so is weakened,
while, other symbols, for example 'bar' will match the second condition,
and so be weakened.
This patch adjusts the logic so that a pattern prefixed with '!'
specifically DOES NOT apply the relevant change to any matching symbols,
instead of applying the change to all non-matching symbols. So this:
--weaken-symbol !foo
will ensure that the symbol 'foo' is not weakened, but says nothing
about symbols that are not 'foo'. As a result, a pattern prefixed with
'!' now only makes sense when used alongside a more wide ranging
wildcard pattern.
This change should make the wildcard matching feature more useful, with
no overall loss of functionality. The example given in the manual,
weaken all symbols matching 'fo*' except 'foo' can now be achieved, but
so too can more complex examples, such as weaken all symbols matching
'fo*' except 'foo', 'foa', and 'fob', like this:
--wildcard --weaken-symbol !foo \
--weaken-symbol !foa \
--weaken-symbol !fob \
--weaken-symbol fo*
Under the previous scheme, something as symbols as, weaken all symbols
except 'foo' could have been achieved with this:
--weaken-symbol !foo
however, this will no longer work. To achieve the same result under the
new scheme this is now required:
--weaken-symbol !foo --weaken-symbol *
binutils/ChangeLog:
* objcopy.c (is_specified_symbol_predicate): Don't stop at first
match. Non-match rules set found to FALSE.
binutils/testsuite/ChangeLog:
* binutils-all/objcopy.exp: Run new symbol tests.
(objcopy_test_symbol_manipulation): New function.
* binutils-all/symbols-1.d: New file.
* binutils-all/symbols-2.d: New file.
* binutils-all/symbols-3.d: New file.
* binutils-all/symbols-4.d: New file.
* binutils-all/symbols.s: New file.
All programs in binutils+gdb git repo now support gABI compression
with the SHF_COMPRESSED bit. This patch makes the zlib-gabi option
as compression default for gas, gold, ld and objcopy, instead of the
zlib-gnu option whose outputs are incompatible with gABI.
binutils/
* objcopy.c (copy_file): Set BFD_COMPRESS_GABI if not
zlib-gnu.
* doc/binutils.texi: Change --compress-debug-sections and
--compress-debug-sections=zlib to zlib-gabi.
binutils/testsuite/
* binutils-all/compress.exp: Update.
gas/
* as.c (parse_args): Make --compress-debug-sections and
--compress-debug-sections=zlib the same as
--compress-debug-sections=zlib-gabi.
* doc/as.texinfo: Change --compress-debug-sections and
--compress-debug-sections=zlib to zlib-gabi.
gold/
* compressed_output.cc (Output_compressed_section::set_final_data_size):
Make --compress-debug-sections=zlib the same as
--compress-debug-sections=zlib-gabi.
* testsuite/Makefile.am (flagstest_compress_debug_sections.check):
Expect ".debug_.*" with the SHF_COMPRESSED bit, instead of
".zdebug_".
* testsuite/Makefile.in: Regenerated.
ld/
* emultempl/elf32.em (gld${EMULATION_NAME}_handle_option): Make
--compress-debug-sections=zlib the same as
--compress-debug-sections=zlib-gabi.
* ld.texinfo: Change --compress-debug-sections=zlib to zlib-gabi.
ld/testsuite/
* ld-elf/zlibbegin.rS: Updated to .debug_.* with the
SHF_COMPRESSED bit.
* ld-elf/zlibnormal.rS: Likewise.
The output SHF_COMPRESSED section size is different from input if
ELF classes of input and output aren't the same. We must adjust
the section sizes as well as the compression headers in
SHF_COMPRESSED sections when converting objects between different
ELF classes.
bfd/
PR binutils/18656
* bfd.c (bfd_convert_section_size): New function.
(bfd_convert_section_contents): Likewise.
* bfd-in2.h: Regenerated.
binutils/
2015-07-10 H.J. Lu <hongjiu.lu@intel.com>
PR binutils/18656
* objcopy.c (setup_section): Call bfd_convert_section_size
to get the output section size.
(copy_section): Get the section size from the output section
and call bfd_get_full_section_contents to convert section
contents for output.
binutils/testsuite/
PR binutils/18656
* binutils-all/compress.exp (convert_test): New proc.
Run conversion tests between x86-64 and x32.
Change compressed input debug section name for objdump is very confusing.
But we need to change it for linker so that linker will consider the
input section as a debug section. This patch delays section rename to
elf_fake_sections for objcopy and avoids it for objdump.
bfd/
PR binutils/18209
* bfd.c (bfd): Add is_linker_input.
* elf.c (convert_debug_to_zdebug): New.
(convert_zdebug_to_debug): Likewise.
(_bfd_elf_make_section_from_shdr): Don't convert .debug_* to
.zdebug_* here. Use convert_zdebug_to_debug. Set SEC_ELF_RENAME.
(_bfd_elf_init_reloc_shdr): Pass a pointer to section name
instead of a pointer to section.
(elf_fake_sections): Rename the section name if SEC_ELF_RENAME
is set.
* section.c (SEC_ELF_RENAME): New.
* bfd-in2.h: Regenerated.
binutils/
PR binutils/18209
* objcopy.c (setup_section): Copy compress status.
binutils/testsuite/
PR binutils/18209
* binutils-all/compress.exp: Replace dw2-3.W with dw2-3gabi.W
on zlib-gabi output.
* binutils-all/dw2-1.W: Convert section names to .zdebug_*.
* binutils-all/dw2-3.W: Likewise.
* binutils-all/objdump.W: Likewise.
* binutils-all/dw2-3gabi.W: New file.
ld/
PR binutils/18209
* ldfile.c (ldfile_try_open_bfd): Set is_linker_input to 1.
We can't check if input is ELF in copy_file since some targets may only
set xvec after bfd_check_format_matches is called. This patch moves
this check to copy_object.
bfd/
* elfxx-target.h (TARGET_BIG_SYM): Add BFD_COMPRESS_GABI to
object_flags.
(TARGET_LITTLE_SYM): Likewise.
binutils/
* objcopy.c (do_debug_sections): Use bit patterns.
(copy_object): Return FALSE for compress_zlib, compress_gnu_zlib
and compress_gabi_zlib on non-ELF input.
(copy_file): Don't check non-ELF input here.
This patch adds --compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}
options to gas and objcopy for ELF files. They control how DWARF debug
sections are compressed. --compress-debug-sections=none is equivalent to
--nocompress-debug-sections. --compress-debug-sections=zlib and
--compress-debug-sections=zlib-gnu are equivalent to
--compress-debug-sections. --compress-debug-sections=zlib-gabi compresses
DWARF debug sections with SHF_COMPRESSED from the ELF ABI. No linker
changes are required to support SHF_COMPRESSED.
bfd/
* archive.c (_bfd_get_elt_at_filepos): Also copy BFD_COMPRESS_GABI
bit.
* bfd.c (bfd::flags): Increase size to 18 bits.
(BFD_COMPRESS_GABI): New.
(BFD_FLAGS_SAVED): Add BFD_COMPRESS_GABI.
(BFD_FLAGS_FOR_BFD_USE_MASK): Likewise.
(bfd_update_compression_header): New fuction.
(bfd_check_compression_header): Likewise.
(bfd_get_compression_header_size): Likewise.
(bfd_is_section_compressed_with_header): Likewise.
* compress.c (MAX_COMPRESSION_HEADER_SIZE): New.
(bfd_compress_section_contents): Return the uncompressed size if
the full section contents is compressed successfully. Support
converting from/to .zdebug* sections.
(bfd_get_full_section_contents): Call
bfd_get_compression_header_size to get compression header size.
(bfd_is_section_compressed): Renamed to ...
(bfd_is_section_compressed_with_header): This. Add a pointer
argument to return compression header size.
(bfd_is_section_compressed): Use it.
(bfd_init_section_decompress_status): Call
bfd_get_compression_header_size to get compression header size.
Return FALSE if uncompressed section size is 0.
* elf.c (_bfd_elf_make_section_from_shdr): Support converting
from/to .zdebug* sections.
* bfd-in2.h: Regenerated.
binutils/
* objcopy.c (do_debug_sections): Add compress_zlib,
compress_gnu_zlib and compress_gabi_zlib.
(copy_options): Use optional_argument on compress-debug-sections.
(copy_usage): Update --compress-debug-sections.
(copy_file): Handle compress_zlib, compress_gnu_zlib and
compress_gabi_zlib.
(copy_main): Handle
--compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
* doc/binutils.texi: Document
--compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
binutils/testsuite/
* compress.exp: Add tests for
--compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
* binutils-all/dw2-3.rS: New file.
* binutils-all/dw2-3.rt: Likewise.
* binutils-all/libdw2-compressedgabi.out: Likewise.
gas/
* as.c (show_usage): Update --compress-debug-sections.
(std_longopts): Use optional_argument on compress-debug-sections.
(parse_args): Handle
--compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
* as.h (compressed_debug_section_type): New.
(flag_compress_debug): Change type to compressed_debug_section_type.
--compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
* write.c (compress_debug): Set BFD_COMPRESS_GABI for
--compress-debug-sections=zlib-gabi. Call
bfd_get_compression_header_size to get compression header size.
Don't rename section name for --compress-debug-sections=zlib-gabi.
* config/tc-i386.c (compressed_debug_section_type): Set to
COMPRESS_DEBUG_ZLIB.
* doc/as.texinfo: Document
--compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
gas/testsuite/
* gas/i386/dw2-compressed-1.d: New file.
* gas/i386/dw2-compressed-2.d: Likewise.
* gas/i386/dw2-compressed-3.d: Likewise.
* gas/i386/x86-64-dw2-compressed-2.d: Likewise.
* gas/i386/i386.exp: Run dw2-compressed-2, dw2-compressed-1,
dw2-compressed-3 and x86-64-dw2-compressed-2.
ld/testsuite/
* ld-elf/compress.exp: Add a test for
--compress-debug-sections=zlib-gabi.
(build_tests): Add 2 tests for --compress-debug-sections=zlib-gabi.
(run_tests): Likewise.
Verify linker output with zlib-gabi compressed debug input.
* ld-elf/compressed1a.d: New file.
* ld-elf/compressed1b.d: Likewise.
* ld-elf/compressed1c.d: Likewise.
Optional argument of a command line option must start with "=".
* objcopy.c (copy_usage): Replace "--interleave [<number>]" with
--interleave[=<number>].
New option for objcopy --update-section allows the contents of a section
to be updated while maintaining the section flags, and, for ELF files,
the section to segment mapping.
New test uses --dump-section and --update-section to check that a
section can be made larger and smaller with an update.
binutils/ChangeLog:
* objcopy.c (update_sections): New list.
(command_line_switch): Add OPTION_UPDATE_SECTION.
(copy_options): Add update-section.
(copy_usage): Document new option.
(is_update_section): New function.
(is_strip_section_1): Add check for attempt to update and remove
the same section.
(copy_object): Update size and content of requested sections.
(skip_section): Don't copy for updated sections.
(copy_main): Handle --update-section.
* doc/binutils.texi (objcopy): Add description of --update-section
option.
* NEWS: Mention --update-section option.
binutils/testsuite/ChangeLog:
* binutils-all/update-1.s: New file.
* binutils-all/update-2.s: New file.
* binutils-all/update-3.s: New file.
* binutils-all/update-4.s: New file.
* binutils-all/update-section.exp: New file.
In commit 7173b38a44 I used optarg as the
name for a function parameter, shadowing the global of that name. This
commit changes the function parameter to be called arg.
binutils/ChangeLog:
* objcopy.c (init_section_add): Rename optarg to arg in order to
avoid shadowing a global variable.
This patch splits out some of the option parsing code, increasing code
reuse.
binutils/ChangeLog:
* objcopy.c (init_section_add): New function.
(section_add_load_file): New function.
(copy_main): Make use of new functions.
PR binutils/17512
* coffcode.h (coff_set_arch_mach_hook): Check return value from
bfd_malloc.
(coff_slurp_line_table): Return FALSE if the line number
information was corrupt.
(coff_slurp_symbol_table): Return FALSE if the symbol information
was corrupt.
* mach-o.c (bfd_mach_o_bfd_copy_private_header_data): Always
initialise the fields of the dyld_info structure.
(bfd_mach_o_build_exec_seg_command): Replace assertion with an
error message and a return value.
(bfd_mach_o_layout_commands): Change the function to boolean.
Return FALSE if the function fails.
(bfd_mach_o_build_commands): Fail if bfd_mach_o_layout_commands
fails.
(bfd_mach_o_read_command): Fail if an unrecognised command is
encountered.
* peXXigen.c (_bfd_XXi_swap_aouthdr_in): Set bfd_error if the
read fails.
(slurp_symtab): Check the return from bfd_malloc.
(_bfd_XX_bfd_copy_private_bfd_data_common): Fail if the copy
encountered an error.
(_bfd_XXi_final_link_postscript): Fail if a section could not be
copied.
* peicode.h (pe_bfd_object_p): Fail if the header could not be
swapped in.
* tekhex.c (first_phase): Fail if the section is too big.
* versados.c (struct esdid): Add content_size field.
(process_otr): Use and check the new field.
(versados_get_section_contents): Check that the section exists and
that the requested data is available.
PR binutils/17512
* addr2line.c (main): Call bfd_set_error_program_name.
* ar.c (main): Likewise.
* coffdump.c (main): Likewise.
* cxxfilt.c (main): Likewise.
* dlltool.c (main): Likewise.
* nlmconv.c (main): Likewise.
* nm.c (main): Likewise.
* objdump.c (main): Likewise.
* size.c (main): Likewise.
* srconv.c (main): Likewise.
* strings.c (main): Likewise.
* sysdump.c (main): Likewise.
* windmc.c (main): Likewise.
* windres.c (main): Likewise.
* objcopy.c (main): Likewise.
(copy_relocations_in_section): Check for relocs without associated
symbol pointers.
PR binutils/17512
* coffcode.h (coff_slurp_symbol_table): Return false if we failed
to load the line table.
* elf.c (_bfd_elf_map_sections_to_segments): Enforce a minimum
maxpagesize of 1.
* peXXigen.c (_bfd_XX_bfd_copy_private_bfd_data_common): Fail if
the Data Directory Size is too large.
* objcopy.c (copy_object): Free the symbol table if no symbols
could be loaded.
(copy_file): Use bfd_close_all_done to close files that could not
be copied.
--enable-deterministic-archives and --disable-deteministic-archive
options were not being accepted.
PR binutils/17671
* objcopy.c (copy_main, strip_main): Add D and U to the list of
accepted short versions of long options.
PR binutils/17552, binutils/17533
* bucomm.c (is_valid_archive_path): New function. Returns false
for absolute pathnames and pathnames that include /../.
* bucomm.h (is_valid_archive_path): Add prototype.
* ar.c (extract_file): Use new function to check for valid
pathnames when extracting files from an archive.
* objcopy.c (copy_archive): Likewise.
* doc/binutils.texi: Update documentation to mention the
limitation on pathname of archive members.
The section name used to store the build-id on pe/coff is arbitrary, as it's
contents should be located using the pe/coff header's DataDirectory debug data
entry, not by using the section name.
But '.build-id' is not a good choice for that section name, as it is 9
characters long, and hence truncated to 8 characters when
--disable-long-section-names is used (which is the default, when producing an
executable with no dwarf debug sections, e.g. using ld --strip-all --build-id)
This truncation then breaks 'objcopy --only-keep-debug', which does use the
section name, due to concerns that keeping an arbitrary section which contains
the debug directory is not sensible.
binutils/ChangeLog
2014-09-01 Jon TURNEY <jon.turney@dronecode.org.uk>
* objcopy.c (is_nondebug_keep_contents_section): Change pe/coff
build-id section name from '.build-id' to '.buildid'.
ld/ChangeLog
2014-09-01 Jon TURNEY <jon.turney@dronecode.org.uk>
* emultempl/pe.em (write_build_id, setup_build_id): Change pe/coff
build-id section name from '.build-id' to '.buildid'.
* emultempl/pep.em (write_build_id, setup_build_id): Ditto.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
original patches were posted:
pe/coff: Display GUID build-id in the conventional way
pe/coff: Don't interpret debug directory in section with no contents
pe/coff: Keep .build-id with --only-keep-debug
pe/coff: Don't break .build-id with objcopy/strip
* peXXigen.c (pe_print_debugdata): Don't interpret debug directory
in a section with no contents.
(is_vma_in_section, find_section_by_vma): New functions.
(_bfd_XX_bfd_copy_private_bfd_data_common): Recalculate file
offsets in the debug directory.
(_bfd_XXi_slurp_codeview_record, _bfd_XXi_write_codeview_record):
Byte-swap GUID from little-endian to big-endian order for
consistent and conventional display.
* objcopy.c (is_nondebug_keep_contents_section): New function.
(setup_section): Use it.
All strip operations require section headers to be present, as do most
objcopy operations. BFD is seriously confused by objects without
section info. The error message added here is similar to the error
on attempting to strip/objcopy a zero length object.
PR binutils/16811
* objcopy.c (copy_object): Error if no sections.
