PR bootstrap/32009
PR bootstrap/32161
* configure.ac (CFLAGS_FOR_TARGET, CXXFLAGS_FOR_TARGET): Compute here.
* configure: Regenerate.
* Makefile.def: Define stage_libcflags for all bootstrap stages.
* Makefile.tpl (BOOT_LIBCFLAGS, STAGE2_LIBCFLAGS, STAGE3_LIBCFLAGS,
STAGE4_LIBCFLAGS): New.
(CFLAGS_FOR_TARGET, CXXFLAGS_FOR_TARGET): Subst from autoconf, without
$(SYSROOT_CFLAGS_FOR_TARGET) and $(DEBUG_PREFIX_CFLAGS_FOR_TARGET).
(BASE_TARGET_EXPORTS): Append them here to C{,XX}FLAGS.
(EXTRA_TARGET_FLAGS): Append them here to {LIB,}C{,XX}FLAGS.
(configure-stage[+id+]-[+prefix+][+module+]): Pass stage_libcflags
for target modules. Don't export LIBCFLAGS.
(all-stage[+id+]-[+prefix+][+module+]): Pass stage_libcflags; pass
$(BASE_FLAGS_TO_PASS) where [+args+] was passed, and [+args+] after
the overridden CFLAGS_FOR_TARGET and CXXFLAGS_FOR_TARGET.
(invocations of `all'): Replace $(TARGET_FLAGS_TO_PASS) with
$(EXTRA_TARGET_FLAGS), $(FLAGS_TO_PASS) with $(EXTRA_HOST_FLAGS).
* Makefile.in: Regenerate.
config:
2008-02-20 Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/32009
* mh-ppc-darwin (BOOT_CFLAGS): Reenable.
Sync with gcc:
2006-12-29 Paolo Bonzini <bonzini@gnu.org>
* configure.in: Reorganize recognition of languages. Add
--enable-stage1-languages. Show supported languages for the chosen
target rather than all recognized languages.
* configure: Regenerate.
2006-12-29 Paolo Bonzini <bonzini@gnu.org>
* Makefile.tpl (GCC_STRAP_TARGETS, all-prebootstrap): Remove.
* Makefile.in: Regenerate.
2006-12-29 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
* configure.in: Warn that MPFR 2.2.0 is buggy.
* configure: Regenerate.
config:
2006-12-29 Paolo Bonzini <bonzini@gnu.org>
* acx.m4: Sync with gcc.
Sync with gcc:
2006-12-19 Paolo Bonzini <bonzini@gnu.org>
* configure.in: Remove "$build" case for powerpc-*-darwin* since
it only affects bootstrap and could be tested on "$host" as well.
* configure: Regenerate.
* config/mh-ppc-darwin: Add to the stage1 cflags here.
2006-12-19 Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/29544
* Makefile.def (flags_to_pass): Add STAGE1_CHECKING.
(bootstrap_stage): Add STAGE1_CHECKING to stage1 configure flags,
move here comment from Makefile.tpl.
* Makefile.tpl: Move some definitions higher in the file.
(STAGE1_CHECKING): New.
* configure.in: Add --enable-stage1-checking.
* configure: Regenerate.
* Makefile.in: Regenerate.
2006-12-03 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
* configure.in: Update error message for missing GMP/MPFR.
* configure: Regenerate.
2006-12-02 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
* configure.in: Update MPFR version in error message.
* configure: Regenerate.
2006-11-26 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
* configure.in (--with-mpfr-dir, --with-gmp-dir): Remove flags.
(--with-mpfr-include, --with-mpfr-lib, --with-gmp-include,
--with-gmp-lib): New flags.
* configure: Regenerate.
config:
2006-12-04 Eric Botcazou <ebotcazou@libertysurf.fr>
* tls.m4 (GCC_CHECK_TLS): Do not test TLS with static linking
if static linking doesn't even work.
* Makefile.tpl (clean-target-libgcc): Test for gcc Makefile presence.
(unstage): Test for stage_last presence.
PR bootstrap/29802
* Makefile.tpl (POSTSTAGE1_FLAGS_TO_PASS): Add HOST_SUBDIR in STAGE_PREFIX.
* Makefile.in: Regenerate.
* Makefile.tpl (configure-stageN-MODULE): Pass --with-build-libsubdir
for stages after the first.
* Makefile.in: Regenerate.
config:
2006-07-19 Paolo Bonzini <bonzini@gnu.org>
* acx.m4: Support --with-build-libsubdir and AC_SUBST
build_libsubdir.
Sync from gcc:
2006-06-06 David Ayers <d.ayers@inode.at>
PR libobjc/13946
* Makefile.def: Add dependencies for libobjc which boehm-gc.
* Makefile.in: Regenerate.
* configure.in: Add --enable-objc-gc at toplevel and have it
enable boehm-gc for Objective-C.
Remove target-boehm-gc from libgcj.
Add target-boehm-gc to target_libraries.
Add target-boehm-gc to noconfigdirs where ${libgcj}
is specified.
Assert that boehm-gc is supported when requested for Objective-C.
Only build boehm-gc if needed either for Java or Objective-C.
* configure: Regenerate.
2006-06-05 Paolo Bonzini <bonzini@gnu.org>
PR 27674
* Makefile.tpl (configure-[+prefix+][+module+],
all-[+prefix+][+module+]): Depend on stage_current if bootstrapping.
Remove rule to unstage bootstrapped modules.
(stage_current): New.
* Makefile.in: Regenerate.
2006-05-20 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
Andreas Tobler <a.tobler@schweiz.ch>
* configure.in: Enable libgcj for hppa*-hp-hpux11*.
* configure: Rebuilt.
Revert
2006-01-31 Richard Guenther <rguenther@suse.de>
Paolo Bonzini <bonzini@gnu.org>
* Makefile.def (target_modules): Add libgcc-math target module.
* configure.in (target_libraries): Add libgcc-math target library.
(--enable-libgcc-math): New configure switch.
* Makefile.in: Re-generate.
* configure: Re-generate.
PR bootstrap/25670
* Makefile.tpl ([+compare-target+]): Print explanation messages.
* Makefile.def (ADAFLAGS, BOOT_ADAFLAGS, LANGUAGES): New flags_to_pass.
* Makefile.tpl (BASE_FLAGS_TO_PASS): Support optional flags_to_pass.
(EXTRA_GCC_FLAGS): Remove ADAFLAGS, BOOT_ADAFLAGS, LANGUAGES,
BUILD_PREFIX, BUILD_PREFIX_1.
* configure.in: (BUILD_PREFIX, BUILD_PREFIX_1): Don't substitute.
* Makefile.def (bootstrap stage 1): Pass LIBCFLAGS too.
* Makefile.tpl (POSTSTAGE1_FLAGS_TO_PASS): Override LIBCFLAGS too.
* Makefile.tpl (configure-stage[+id+]-[+prefix+][+module+],
all-stage[+id+]-[+prefix+][+module+], : Use $(current_stage) instead
of `cat stage_current`. Always provide the `r' and `s' variables.
(clean-stage[+id+]-[+prefix+][+module+]): Likewise, and make it into
a single shell execution.
(configure-[+prefix+][+module+], all-[+prefix+][+module+]): For
bootstrapped modules, make the stage1 module if the build was not
started yet, else build the current stage.
(all-host, all-target): Omit bootstrapped modules (if bootstrapping).
(all-build, all-host, all-target, [+make_target+]-host,
[+make_target+]-target): Do not use \-continued lines.
(target modules): Depend on stage_last, not all-gcc, if bootstrapping.
(current_stage, restrap, stage_last): New.
* Makefile.in: Regenerate.
* configure: Regenerate.
Sync from gcc:
2006-01-04 Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/24252
* Makefile.def (flags_to_pass): Add STAGE1_CFLAGS and STAGE1_LANGUAGES.
* Makefile.tpl (OBJDUMP): New.
(EXTRA_HOST_FLAGS): Add it.
(EXTRA_GCC_FLAGS): Remove flags already specified in flags_to_pass.
* Makefile.tpl (stage[+id+]-start, stage[+id+]-end): Do not try
to use symbolic links between directories. Avoid race conditions
or make them harmless.
* configure.in: Do not try to use symbolic links between directories.
* Makefile.def (LEAN): Pass.
* Makefile.tpl (LEAN): Define.
(stage[+id+]-start): Accept that the previous directory does not
exist, if the bootstrap is lean.
(stage[+id+]-bubble): Invoke lean bootstrap commands after
stage[+id+]-start. Use a makefile variable and an `if' instead of a
configure substitution.
([+compare-target+]): Likewise.
([+bootstrap-target+]-lean): New.
* configure.in: Remove lean bootstrap support from here.
* Makefile.in: Regenerate.
* configure: Regenerate.
2006-01-02 Andreas Schwab <schwab@suse.de>
* configure.in: When reconfiguring remove Makefile in
all stage directories.
* configure: Regenerate.
Revert Ada-related part of the previous change.
* Makefile.def (ADAFLAGS, BOOT_ADAFLAGS, ADAFLAGS_FOR_TARGET):
Do not pass.
* Makefile.tpl (BOOT_ADAFLAGS): Do not define.
* Makefile.in: Regenerate.
* configure.in: Do not include mt-ppc-aix target fragment.
* configure: Regenerate.
config:
2005-12-20 Paolo Bonzini <bonzini@gnu.org>
Revert Ada-related part of the previous change.
* mt-ppc-aix: Delete.
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
Sync with gcc:
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
* configure.in (CONFIGURED_BISON, CONFIGURED_YACC, CONFIGURED_M4,
CONFIGURED_FLEX, CONFIGURED_LEX, CONFIGURED_MAKEINFO): Remove
"CONFIGURED_" from the AC_CHECK_PROGS invocation. Move below.
Find in-tree tools if available.
(EXPECT, RUNTEST, LIPO, STRIP): Find them and substitute them.
(CONFIGURED_*_FOR_TARGET): Don't set nor substitute.
(*_FOR_TARGET): Set them with GCC_TARGET_TOOL.
(COMPILER_*_FOR_TARGET): New.
* Makefile.tpl (HOST_EXPORTS): Add *_FOR_TARGET symbols that gcc needs.
(BASE_TARGET_EXPORTS): Use COMPILER_*_FOR_TARGET symbols.
(CONFIGURED_*, USUAL_*): Remove.
(BISON, YACC, FLEX, LEX, M4, MAKEINFO, EXPECT, RUNTEST, LIPO,
STRIP): Use autoconf substitutions.
(COMPILER_AS_FOR_TARGET, COMPILER_LD_FOR_TARGET,
COMPILER_NM_FOR_TARGET): New.
(EXTRA_HOST_FLAGS): Pass LIPO and STRIP.
(all): Make all-host and all-target in parallel.
(do-[+make_target+], do-check, install, [+compare-target+]): Ensure
that $$r and $$s are set before invoking a recursive make.
(stage[+id+]-bubble): Likewise, and invoke the comparison at the end.
([+bootstrap-target+]): Inline most of the `all' target.
2005-11-29 Ben Elliston <bje@au.ibm.com>
* Makefile.tpl (clean-target-libgcc): Invoke clean-target-libgcc
from the gcc build directory.
* Makefile.in: Regenerate.
2005-11-29 Ben Elliston <bje@au.ibm.com>
* Makefile.def: Add new libdecnumber host_module. Make all-gcc
depend on all-libdecnumber.
* configure.in (host_libs): Include libdecnumber.
* Makefile.in: Regenerate.
* configure: Likewise.
2005-11-21 Kean Johnston <jkj@sco.com>
* config.sub, config.guess: Sync from upstream sources.
config:
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
* acx.m4 (GCC_TARGET_TOOL): New.
* Makefile.tpl (CONFIGURE_GDB_TK, INSTALL_GDB_TK): New variables.
(configure-gdb, install-gdb): New rules.
* configure.in: Set CONFIGURE_GDB_TK and INSTALL_GDB_TK.
* Makefile.in, configure: Regenerated.
PR bootstrap/24297
* Makefile.tpl (do-[+make-target+], do-check, install,
stage[+id+]-bubble, [+compare-target+]): Ensure $$r and $$s
are set before recursing.
* Makefile.in: Regenerate.
PR bootstrap/22340
* configure.in (default_target): Remove.
* Makefile.tpl (all): Do not use prerequisites as subroutines
(all) [gcc-bootstrap]: Bootstrap gcc first if it was not done yet.
(do-[+make_target+], check, install, [+bootstrap_target+]): Do not
use prerequisites as subroutines.
(check-host, check-target): New.
(bootstrap configure & all targets): Do not use stage*-start
if the directory layout is already ok.
(non-bootstrap configure & all targets): Prepend a $(unstage).
(stage[+id+]-bubble): Do that here. Do not use NOTPARALLEL.
(NOTPARALLEL): Remove.
(unstage, stage variables): New variables.
(unstage, stage targets): Simply expand to those variables.
* configure: Regenerate.
* Makefile.in: Regenerate.
