and config/a29k/vx29k.mt.
* configure.in: add new configuration a29k-*-vxworks.
* remote-vx29k.c: new file merged from WRS.
* remote-vx.c: merge changes from WRS.
Add procfs support for Alpha OSF/1-2.x.
* config/alpha/nm-osf.h: Renamed from nm-alpha.h, generic
OSF/1 native support.
* config/alpha/alpha-osf1.mh (NAT_FILE): Changed accordingly.
(MUNCH_DEFINE): Removed.
* config/alpha/alpha-osf2.mh, config/alpha/nm-osf2.h: New files
for procfs support.
* configure.in (alpha-dec-osf*): Use alpha-osf2.mh for OSF/1
release 2.x and higher, else alpha-osf1.mh, as the procfs support
in release 1.x is incomplete.
* Makefile.in (ALLCONFIG): Add config/alpha/alpha-osf2.mh.
* alpha-nat.c (supply_gregset, fill_gregset, supply_fpgregset,
fill_fpgregset): New routines for procfs support.
* inftarg.c (_initialize_inftarg): Don't add ptrace support
if we have an optional procfs and /proc is accessible.
* procfs.c: Include sys/fault.h and sys/syscall.h before
including sys/procfs.h.
(unconditionally_kill_inferior): If PROCFS_NEED_PIOCSSIG_FOR_KILL
is defined, additionally perform a PIOCSSIG to really terminate
the inferior.
(create_procinfo): Always return a result.
(create_procinfo, do_attach): Don't trace T_IFAULT faults if
PROCFS_DONT_TRACE_IFAULT is defined.
(procfs_init_inferior): Use START_INFERIOR_TRAPS_EXPECTED as
argument to startup_inferior if it is defined.
(proc_set_exec_trap): If PIOCSSPCACT is defined, use it instead
of tracing exits from exec system calls. Needed for the user level
loader under Alpha OSF/1.
(do_detach): Clear any pending signal if we want to detach from
a process without a signal.
(set_proc_siginfo): If PROCFS_DONT_PIOCSSIG_CURSIG is defined,
don't issue a PIOCSSIG if pr_cursig already contains the signal we
intend to set.
(info_proc_signals): If PROCFS_SIGPEND_OFFSET is defined, the
pending signals are numbered from 1 instead of 0.
(info_proc_mappings): Increase size of output format for addresses
if BFD_HOST_64_BIT is defined.
(procfs_stop): Renamed from child_stop.
(_initialize_procfs): Don't add procfs support if we have an
optional procfs and /proc is not accessible.
* core.c (dis_asm_read_memory): Add call to
dis_asm_read_memory_hook to provide alternate way for disassembler
to read memory.
* defs.h: Protect from multiple inclusion. Add decl for
dis_asm_read_memory_hook.
* gdbtk.c (finish_saving_output): Don't do anything if not saving
output.
* (breakpoint_notify): Don't send null filename to tcl.
* (gdb_eval): New tcl command to eval an expression.
* (gdb_disassemble): New tcl command to do disassembly. This
allows tcl code to choose between exec file and target memeory,
and can also do mixed source and assembly.
* (gdbtk_init): Move reading of gdbtk.tcl to the end to make sure
that more of the environment is set up. Also, create link between
gdb and tcl vars disassemble{-_}from{-_}exec.
* gdbtk.tcl: New expression window support.
* Make assembly window be 80 columns wide.
* Use new disassembly method. Add menu items to select
disassembly from exec file or target.
* Change View menubar item to Options.
* Get rid of Stack, Breakpoints, Signals, and Variables Windows,
since they don't exist yet.
* Pop up a copyright window on startup.
* top.c: Make window startup be the default.
* Add dis_asm_read_memory_hook.
i386aix-nat.o, i386m3-nat.o, irix5-nat.o, lynx-nat.o, m3-nat.o,
mipsm3-nat.o, ns32km3-nat.o, remote-e7000.o, remote-os9k.o):
Add dependencies.
(copying.o, os9kread.o, remote.o): Update dependencies.
* valarith.c (value_sub): When subtracting pointers, only
check for a match of the pointed to element lengths.
Cast element length to LONGEST to obtain a signed result for
pointer subtractions.
available.
* configure.in (ENABLE_CLIBS): Use $(TCL) and $(TK) instead of
-ltcl and -ltk.
* gdbtk.c: Get rid of lots of unnecessary #includes.
* (gdbtk_init): Use ConnectionNumber macro instead of referencing
Display structure directly.
* gdbtk.tcl: Change exit button to quit button (makes shebs
happy).
* Makefile.in: Remove xcoffexec.o rule.
* exec.c (exec_file_command): Add comment.
Fix data and bss relocation for VxWorks 5.1:
* remote-vx.c (vx_add_symbols): New function.
(vx_load_command, add_symbol_stub): Call it instead of
symbol_file_add.
(vx_wait): Remove comment which was wrong to useless.
* remote-vx.c: Reindent much of file.
* coffread.c (cs_to_section, find_targ_sec): New functions.
(process_coff_symbol): Set SYMBOL_SECTION to result
from cs_to_section.
(coff_symtab_read): Call cs_to_section and deal appropriate
rather than assuming sections are in a certain order. Deal with
BSS.
* coffread.c: Remove text_bfd_scnum variable.
(hpread.o): Add dependencies.
* somread.c: Do not include "aout/aout64.h". SOM has nothing to
do with a.out.
(BYTES_IN_WORD): Delete.
(som_symfile_read): Call hpread_build_psymtabs to build any
minimal symbols based on the HP C native debug symbols.
(som_symfile_finish): Call hpread_symfile_finish.
(som_symfile_init): Call hpread_symfile_init.
* config/pa/tm-hppa.h (HPREAD_ADJUST_STACK_ADDRESS): Define.
* hppa-tdep.c (hpread_adjust_stack_address): New function.
* config/pa/hppabsd.mh (NATDEPFILES): Add hpread.o
* config/pa/hppahpux.mh (NATDEPFILES): Likewise.
* hpread.c: New file.
NLMCONV_FOR_TARGET. (SUBDIRS): Add nlm target.
* configure.in (powerpc-*-netware*): Automatically configure nlm
subdir.
* nlm/Makefile.in: Add {CC NLMCONV LD}_FOR_TARGET. Remove alpha
specific stuff. Make things more configurable.
* nlm/configure.in: Add powerpc-*-netware* target. Use
gdbserve.mt/cpu.c/cpu.h for target stuff. Get rid of tm/xm/nm.h
files.
* nlm/gdbserve.c: Move Alpha specific stuff into other files.
Remove lots of architecture-specific stuff.
* nlm/gdbserve.def: Add new imports.
* nlm/ppc.c, nlm/ppc.h: New files that contain PowerPC specific code.
* nlm/prelude.c: Don't include libhooks.h, get rid of call to
register library.
* nlm/prelude.o: What was this doing here?
Remove; unused.
(TAGFILES_NO_SRCDIR): Remove ALLPARAM.
(HFILES_NO_SRCDIR): Remove all files in config sub-directory.
(TAGS): Also pass result of find on config sub-directory to etags.
(ALLPARAM): Remove; now unused.
--enable-xxx configure option by adding ENABLE_{CLIBS DEPFILES}
where appropriate.
* General hackery to support alternate user-interface.
* breakpoint.c (mention, delete_breakpoint, enable_breakpoint,
disable_breakpoint): Call hooks for alternate user-interface.
* defs.h: Add declarations for alternate user-interface hooks.
* main.c (main): Add --nw (and --nowindows) options to disable
the GUI.
* (near call to command_loop): Call command_loop_hook if set.
* (fputs_unfiltered): Call fputs_unfiltered_hook if set.
* stack.c: Call print_frame_info_listing_hook if set.
* top.c (gdb_init): Initialize targets.c and utils.c prior to
other files to make sure that calls to error and warning will
work. Call init_ui_hook after everything else.
* utils.c (query): Call query_hook if set.
* (gdb_flush): Call flush_hook if set.
* Change _initialize_utils to initialize_utils cuz we don't use
automatic initialization of utils.c anymore.
* Support for TK GUI.
* Makefile.in: Add rule for gdbtk.o.
* configure.in: Add support for --enable-gdbtk.
* gdbtk.c: New file. Contains support routines for TK interface.
* gdbtk.tcl: New file. Implements GUI policy.
* remote.c: Get rid of #ifdef DONT_USE_REMOTE. It's no longer
necessary.
(diststuff): Add for new distribution support.
(gdb.tar.Z, make-proto-gdb.dir, setup-to-dist,
gdb-$(VERSION).tar.Z, make-proto-gdb-1, make-proto-testsuite.dir):
Remove old distribution building rules, now uses standard
distribution support in parent directory Makefile.in.
* Add rule for annotate.o to keep Sun make happy.
* configure.in: Add config for powerpc/Netware.
* partial-stab.h (near N_SO): Don't call START_PSYMTAB with null
filename. This speeds up handling of trailing N_SO stabs (they
mark the end of a .o file).
* target.c, target.h: Change the way pushing and popping of
targets work to support target overlays and inheritance.
* corelow.c, hppa-tdep.c, inflow.c, remote-nindy.c, utils.c:
Fixup references to current_target, due to previous changes.
* config/i386/tm-i386nw.h: Enable longjmp support. More work is
needed to get the address of longjmp out of the target.
(i[34]86-*-mach3*, i[34]86-*-osf1mk*, mips-*-mach3*,
m88*-*-mach3*, ns32k-*-mach3*): Recognize.
* Makefile.in (gdb-stop): New target.
* gdb-stop.c: New file, utility to gets attention of waiting GDBs
in Mach 3.
to new file top.c. Make things extern instead of static and
similar rearrangements to deal with this.
* top.h: New file.
* utils.c: Move fputs_unfiltered to main.c. Remove
FPUTS_UNFILTERED_OVERRIDE ifndef.
* Makefile.in: Change so that gdb uses main.c, utils.c, and top.c,
and libgdb uses utils.c and top.c.
(child_mourn_inferior): Call proc_remove_foreign.
* main.c (gdb_init): Call init_proc.
* main.c: Provide dummy versions of init_proc, proc_wait, and
proc_remove_foreign for the gdb case (the libgdb case provides its
own versions of these functions).
* Makefile.in (libgdb-files): Add libproc.a.
cyscm links against ../../gdb/{...}.o
Added a new target: libgdb-files. It creates a file of that name
containing a list of files for libgdb. If the variable LIBGDBPREFIX
is set, each file name has that prepended.
BROKEN_LARGE_ALLOCA. Do the cleanup before returning, rather than
leaving it on the chain. Reindent much of this function.
* config/sparc/{xm-sun4sol2.h,xm-sun4os4.h},
config/i386/{xm-sun386.h,xm-i386m3.h,xm-i386mach.h},
config/m68k/{sun3os4.h,xm-news.h,xm-hp300hpux.h},
config/ns32k/xm-ns32km3.h: Remove all references to
BROKEN_LARGE_ALLOCA; with the above change it is no longer needed.
* main.c, fork-child.c, many config files: Remove all
SET_STACK_LIMIT_HUGE code; with the above changes it should no
longer be needed.
* symtab.c (lookup_partial_symbol): Use if and abort, not assert.
This avoids __eprintf troubles.
* main.c (main): Surround in #ifndef MAIN_OVERRIDE. Move
initialization code which needs to be called even if we bypass the
command line stuff into gdb_init.
* utils.c (fputs_unfiltered): Surround in #ifndef
FPUTS_UNFILTERED_OVERRIDE.
* Makefile.in (libgdb.a): New target.
* utils.c: Rearrange I/O stuff a bit so that all output goes
through fputs_unfiltered. Use vasprintf; removes arbitrary limit
which made %s not work with arbitrarily large strings.
* printcmd.c (printf_command): Use printf_filtered, not
printf_unfiltered and printf, now that arbitrary limit is gone.
find, to locate TM_FILE, XM_FILE, and NAT_FILE. This is faster
and means that these filenames no longer need be unique across all
the config/* directories.
* configure.in: Put the config/*/ into TM_FILE, etc.
* m68k-stub.c (computeSignal): Return SIGFPE, not SIGURG, for chk
and trapv exceptions.
* target.h (struct section_table), objfiles.h (struct obj_section):
Change name of field sec_ptr to the_bfd_section. More mnemonic
and avoids the (sort of, for the ptx compiler) name clash with
the name of the typedef.
* exec.c, xcoffexec.c, sparc-tdep.c, rs6000-nat.c, osfsolib.c,
solib.c, irix5-nat.c, objfiles.c, remote.c: Change users.
* utils.c: Include readline.h.
* Makefile.in (utils.o): Add dependency.
* remote.c (getpkt): Add support for run-length encoding.
GNUTARGET.
* putenv.c: Removed, conflicts with system declaration of
putenv on RS/6000 running AIX 3.2.5, and above change makes it
unnecessary.
* Makefile.in: Change accordingly.
* procfs.c (procfs_create_inferior): Change comment accordingly.
VARIABLES_INSIDE_BLOCK to OS9K_VARIABLES_INSIDE_BLOCK.
* symfile.c (symbol_file_command): Check for (CORE_ADDR)-1, not
(CORE_ADDR)0, from target_link, since that is what it uses.
Process name at end, not during parsing (like we did before Kung's
change), so that -readnow and -mapped can appear anywhere.
Make text_relocation a local variable.
* config/i386/i386os9k.mt: Fix comment.
* Makefile.in (ALLDEPFILES): Add remote-os9k.c.
* os9kread.c: Put "comments" after #endif inside /* */.
* stabsread.h: Add os9k_stabs variable.
* stabsread.c (start_stabs), os9kread.c (os9k_process_one_symbol):
Set it.
* stabsread.c (define_symbol): If os9k_stabs, put a 'V' symbol
descriptor in global_symbols not local_symbols.
(read_type): If os9k_stabs, accept 'c', 'i', and 'b' type
descriptors.
(read_type): If os9k_stabs, accept function parameters after 'f'
type descriptor.
(read_array_type): If os9k_stabs, don't expect index type and
expect lower and upper to be separated by ',' not ';'.
(read_enum_type): If os9k_stabs, read a number before the first
enumeration constant.
(os9k_init_type_vector): New function.
(dbx_lookup_type): Call it when starting new type vector.
* config/i386/tm-i386os9k.h: Define BELIEVE_PCC_PROMOTION.
* (os9k_process_one_symbol): Call define_symbol not os9k_define_symbol.
* os9kstab.c: Removed.
* Makefile.in: Update accordingly.
* objfiles.c (objfile_relocate_data): Removed.
* remote-os9k.c (rombug_wait): Call objfile_relocate
not objfile_relocate_data.
* objfiles.h, objfiles.c: Remove find_pc_objfile.
* remote-os9k.c (rombug_wait): Call find_pc_section not
find_pc_objfile.
* main.c (quit_command): Check inferior_pid; revert Kung change.
* remote-os9k.c (rombug_create_inferior): Set inferior_pid.
ChangeLog objfiles.c objfiles.h symfile.c target.c main.c
Makefile.in configure.in
Added Files:
os9kread.c os9kstab.c remote-os9k.c
* os9kread.c: New file to read os9000 style symbo table.
* os9kstab.c: new file to read os9000 style stabs.
* remote-os9k.c: remote protocol talking to os9000 rombug monitor.
* objfiles.c (find_pc_objfile): new function to search objfile
from pc.
* objfiles.c (objfile_relocate_data): new function to relocate
data symbols in symbol table.
* objfiles.h: Add two aux fields in struct objfile to handle
multiple symbol table files situation like in os9000.
* symfile.c: Change so 'symbol-file' command can handle multiple
files. Also call target_link() to get relocation infos.
* target.c (target_link): new function to get relocation info when
a symbol file is requested to load.
* main.c (quit_command): take out 'inferior_pid != 0' condition,
because in cross mode there's no inferior pid, bit they need to
be detached.
Makefile.in: add os9kread.c os9kstab.c and .o's.
configure.in: add i386os9k target.
config/i386/i386os9k.mt: new add.
config/i386/tm-i386os9k.h: new add.
ourselves instead of worrying about INSTALL_XFORM. This enables
users to override INSTALL_PROGRAM in the standard way.
* Makefile.in (c-exp.tab.o, ch-exp.tab.o, m2-exp.tab.o): Don't
depend on Makefile.in.
config/ns32k/ns32km3.mh: Define NAT_FILE.
* config/nm-m3.h: Change guard from _OS_MACH3_H_ and _OS_MACH3_H
(it was inconsistent and namespace-wrong) to NM_M3_H.
* m3-nat.c (mach_really_wait): Change parameter name to ourstatus.
(m3_open): New function.
(m3_ops): Use it.
* TODO: Update Mach section.
* Makefile.in: Remove "rapp" stuff; it is superseded by gdbserver.
* thread.c: Include "gdbcmd.h" and <ctype.h>.
* Makefile.in: Update dependency.
* thread.c (thread_command): Remove unused variable p.
* values.c (unpack_double): Use len instead of TYPE_LENGTH (type).
* valprint.c (print_floating): Correctly check sign bit now that
we are using unsigned arithmetic.
* symtab.c (find_pc_line_range): Remove unused variables exact_match,
ind, and l.
should not try to search for _initialize_* functions.
* remote-udi.c (udi_wait): Change UDIGdb_StdoutReady back to
UDIStdoutReady. It accidentally got changed on 24 Oct 93 when
stdout was changed to gdb_stdout. Likewise for UDIGetStdout,
UDIStderrReady, and UDIGetStderr.
* Makefile.in (udi2go32.o): add rule to build this file
* 29k-share/udi/udi2go32.c: new file
* config/a29k/a29k-udi.mt: add udi2go32.o
* 29k-share/udi/{udr.c, udip2soc.c}: #ifdef out the entire file
if __GO32__ is defined. What a hack.
* breakpoint.c: Include thread.h.
* coffread.c: Include stabsread.h.
* Makefile.in: Update dependencies.
* breakpoint.c (mention): Add bp_call_dummy to switch.
* symmisc.c (dump_symtab): Use %d not %ld for line number.
cleans up all kinds of hassles (which nm to use in munch, etc). The
new formatting conventions (mostly already followed) are that
the name of the _initialize_* routines must start in column zero,
and must not be inside #if.
* munch: Removed.
* Makefile.in: Remove references to munch.
* serial.c, remote.c, infptrace.c, maint.c, convex-tdep.c,
alpha-tdep.c, hp300ux-nat.c, hppab-nat.c, osfsolib.c, remote-es.c,
procfs.c, remote-udi.c, ser-go32.c, ultra3-xdep.c, sh-tdep.c,
i960-tdep.c, hppa-tdep.c, h8500-tdep.c, dpx2-nat.c, delta68-nat.c,
z8k-tdep.c: Make sure the above conventions are followed. Make
sure they are all declared as returning void. Clean up
miscellaneous comments and such.
remote-mon.c (monitor_create_inferior), remote-nindy.c
(nindy_create_inferior), remote-st.c (st2000_create_inferior),
remote-vx.c (vx_create_inferior): Remove CREATE_INFERIOR_HOOK; it
is replaced by init_trace_fun.
* config/convex/xm-convex.h, convex-xdep.c: Add comments explaining
how to do without CREATE_INFERIOR_HOOK for whoever fixes the Convex
port.
* Makefile.in: Add Mach files to ALLDEPFILES, etc.
* m3-nat.c: Clean up more hair--message(), cprocs.
* configure.in: Recognize Mach targets and hosts.
* config/ns32k/tm-umax.h: Add some #ifndef's so tm-ns32km3.h can
include this file.
* Mach headers in config/*/tm-*.h: Fix includes to match correct
locations of files.
regex.c to be consistent across hosts.
* source.c (_initialize_source): Initialize regex to use grep
style syntax as an approximation to POSIX basic regex syntax.
understand what it is trying to do, but I suspect it's not doing
it.
* config/ns32k/merlin.mh: Add comment about M_INSTALL.
* config/m88k/{delta88.mh,delta88v4.mh}: Remove M_INSTALL and
M_UNINSTALL; it tries to install a non-existent file gdb.z.
* Makefile.in: Remove M_INSTALL stuff; the above were the only uses.
* alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt,
config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c:
New files.
* Makefile.in: Add new files and dependencies.
* configure.in: Add alpha target.
* config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o
* config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle
shared libraries now.
* config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right.
* defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE,
provide `unsigned int' default.
* breakpoint.c (breakpoint_auto_delete): Delete only if we really
stopped for the breakpoint.
* stabsread.c, stabsread.h (define_symbol): Change valu parameter
to a CORE_ADDR.
* stabsread.c (read_range_type): Handle the case where the lower
bound overflows and the upper doesn't and the range is legal.
* infrun.c (resume): Do not step a breakpoint instruction if
CANNOT_STEP_BREAKPOINT is defined.
* inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT.
Now that we have the bp_call_dummy breakpoint the call dummy code
is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and
FIX_CALL_DUMMY can be used to set up everything for the dummy.
The breakpoint for the dummy is set at the entry point and thats it.
* blockframe.c (inside_entry_file, inside_entry_func): Do not stop
backtraces if pc is in the call dummy at the entry point.
* infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use
the expected breakpoint pc when setting up the frame for
set_momentary_breakpoint.
* symfile.c (entry_point_address): New function for AT_ENTRY_POINT
support.
* valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
* Makefile.in (CLIBS): Reorder to make Lynx ld happy.
* (HFILES): New file thread.h.
* (OBS): New file thread.c.
* configure.in: Host config for Lynx/386.
* fork-child.c (fork_inferior): Call init_thread_list().
* infrun.c (resume): Add pid to invocation of target_resume().
* (wait_for_inferior): Pay attention to pid from target_wait().
Multi-threading code now uses this to determine what to do.
* inftarg.c (child_wait): Conditionalize based on CHILD_WAIT macro.
Use target_pid_to_str() macro throughout when printing pid.
* inferior.h (child_resume): Add pid to prototype.
* hppab-nat.c hppah-nat.c infptrace.c (child_resume): Pass in pid as
argument, instead of using inferior_pid.
* procfs.c (procfs_resume): Pass in pid as argument. Ignored for
now. Use target_pid_to_str() macro throughout for printing process id.
* remote-adapt.c (adapt_resume): Pass in pid as argument.
* remote-eb.c (eb_resume): Pass in pid as argument.
* remote-es.c (es1800_resume): Pass in pid as argument.
* remote-hms.c (hms_resume): Pass in pid as argument.
* remote-mips.c (mips_resume): Pass in pid as argument.
* remote-mm.c (mm_resume): Pass in pid as argument.
* remote-monitor.c (monitor_resume): Pass in pid as argument.
* remote-nindy.c (nindy_resume): Pass in pid as argument.
* remote-sa.sparc.c (remote_resume): Pass in pid as argument.
* remote-sim.c (rem_resume): Pass in pid as argument.
* remote-sp64sim.c (simif_resume): Pass in pid as argument.
* remote-st.c (st2000_resume): Pass in pid as argument.
* remote-udi.c (udi_resume): Pass in pid as argument.
* remote-vx.c (vx_resume): Pass in pid as argument.
* remote-z8k.c (rem_resume): Pass in pid as argument.
* remote.c (remote_resume): Pass in pid as argument.
* solib.c (solid_create_inferior_hook): Pass inferior_pid to
target_resume().
* target.c (normal_pid_to_str): New routine to print out process
ID normally.
* target.h (struct target_ops): Add pid to prototype at
to_resume(). (target_resume): Add pid argument.
* (target_pid_to_str): Default definition for normal type pids.
* thread.c, thread.c: New modules for multi thread/process control.
but not the others.
* symm-tdep.c: Remove exec_file_command.
[_SEQUENT_] (ptx_coff_regno_to_gdb, register_addr): New functions.
A few miscellaneous cleanups.
* symm-nat.c: Renamed from symm-xdep.c.
* All symmetry dependent files: Many changes.
Make comment explaining this comprehensible.
(TAGFILES): Include ALLDEPFILES.
(ALLDEPFILES): udi2soc.c and udr.c are in 29k-share/udi, not
29k-share/udi/udi.
(update-alldeps): Remove; obsolete.
* Makefile.in (HFILES): Include monitor.h.
* Makefile.in: Include text that used to be in alldeps.mak.
Remove config/mips/{bigmips.mh,xm-bigmips} from it.
* Makefile.in, configure.in: Remove all traces of alldeps.mak.
${srcdir}/../include.
* config/m88k/xm-delta88.h: Comment out unused defines which conflict
with system headers.
* printcmd.c (printf_command): Cast second arg to vprintf to PTR.
Use VPRINTF macro if defined.
* config/m88k/xm-delta88.h: Define VPRINTF. Include <sys/siginfo.h>.
Define TIOC{GETC,GLTC}_BROKEN.
* m88k-nat.c: Uncomment include of <sys/ptrace.h>.
* main.c: Rename initialize_{main,cmd_lists,history} to init_* to
make things easier on munch (apparently this matters on
the delta88 with svr3).
* c-valprint.c (c_val_print): For array of chars printed with
string syntax, don't print the address of the array. From
bothner@cygnus.com.
* c-exp.y (yylex): Recognize '.' as indicating a floating point
number regardless of the radix. From wilson@cygnus.com.
* valprint.c (set_input_radix_1, set_output_radix_1): New
prototypes and functions that do the actual radix setting work.
* valprint.c (set_radix, set_output_radix, set_input_radix):
Rewrite to use set_input_radix_1 and set_output_radix_1.
* valprint.c (initialize_valprint): Enable commands to
independently set and show input and output radices.
* valprint.c (show_radix): New prototype and function that
handles separate input and output radices.
* Makefile.in (BFD_OBJ_DIR): New definition for the bfd build
directory to find automatically generated header files and library.
* Makefile.in (BFD_LIB): Use BFD_OBJ_DIR.
* Makefile.in (LINTFLAGS): Include BFD_OBJ_DIR.
* Makefile.in (saber_gdb): Include BFD_OBJ_DIR.
* Makefile.in (depend): Include BFD_OBJ_DIR in gcc args.
* Makefile.in (paread.o, xcoffexec.o): Remove, now in depend.
* depend, alldeps.mak: Rebuild after Makefile.in changes.
* defs.h (memcmp): Add decl for memcmp to #ifndef MEM_FNS_DECLARED.
* findvar.c (write_register): See if we are writing back the same
value that's already in the register. If so, don't bother.
* remote.c (putpkt, getpkt): Improve handling of communication
problems.
* ser-go32.c: Prototype it to death. Update serial_ops and add
dummy routines where appropriate.
* ser-tcp.c: New module to implement serial I/O via TCP
connections.
* ser-unix.c: Clean up getting/setting of tty state. Get rid of
SERIAL_RESTORE, add SERIAL_{GET|SET}_TTY_STATE interfaces.
* serial.c: Add start of support for connect command.
(serial_open): Distinguish between tcp and local devices.
* serial.h (struct serial_ops): Get rid of restore, add
get_tty_state and set_tty_state. Define protoypes and macros for
this mess.
* gdbserver/remote-utils.c: Add tcp support. (readchar): Do
some real buffering. Handle error conditions gracefully.
* gdbserver/remote-inflow-sparc.c: Update to remote-inflow.c
(Lynx), remove lots of cruft.
support it.
* config/i386/go32.mh: Define SER_HARDWIRE.
* Makefile.in: Define SER_HARDWIRE.
(DEPFILES): Use it.
(alldeps.mak): Add SER_HARDWIRE.
Remove all references to ser-hardwire.{c,o}.
* configure.in: Remove all ser_hardwire and gdb_serial_driver stuff.
if srcdir is not ".".
Also put in -I${BFD_DIR} or -I${READLINE_DIR} for files which need it.
(INCLUDE_CFLAGS): Remove BFD_DIR and READLINE_DIR.
* depend: Update to latest automatically built version.
* Makefile.in (INCLUDE_CFLAGS): Add BFD_DIR and READLINE_DIR
directories to include search path.
* Makefile.in (CLIBS, CDEPS, ADD_FILES, ADD_DEPS): Clean up
whitespace.
* Makefile.in (depend): For gcc -MM line, use INTERNAL_CFLAGS
* Makefile.in (main.o, dbxread.o, coffread.o, mipsread.o,
elfread.o, dwarfread.o, stabsread.o, xcoffread.o, xcoffexec.o,
xdr_ld.o, xdr_rdb.o, nindy.o, Onindy.o, ttybreak.o, ttyflush.o,
udr.o, udip2soc.o): Remove explicit rules, use the ones that
are automatically generated in "depend".
* Makefile.in (paread.o): Document why a dependency doesn't get
automatically generated in "depend" and leave this explicit rule
in for now (FIXME).
* depend: Update to latest automatically generated version.
prototype testsuite tree.
* Makefile.in (TAGS): Remove use of DEPFILES, it may be empty.
In any case, it is a subset of the ALLDEPFILES list, which is
part of SOURCES, which is part of TAGFILES, so it's redundant.
(alldeps.mak): Add "${srcdir}/" to files in alldeps.mak.
(TAGS): Deal with srcdir and new config directory scheme.
createtags: Remove.
Makefile.in (NONSRC): Remove createtags.
alldeps.mak: Updated.
These implement a new serial line interface for talking to remote
targets.
* configure.in: Link ser-hardwire.c to ser-unix.c for all hosts,
EXCEPT go32, which gets ser-go32.c.
* remote.c: Use new serial interface. More remote-xxx's to be
converted later.
* ser-bsd.c, ser-termios.c: Removed.
* serial.c: New. Implements common operations for all serial
types.
* ser-unix.c: New. Unix specific serial operations for various
flavors of Unix (Posix, SysV, BSD).
* serial.h: Generic serial interface defs.
* config/i386/go32.mh, config/i386/i386bsd.h,
config/m68k/apollo68b.mh, config/sparc/sun4os4.mh: Remove
ser-bsd.o from XDEPFILES. All the magic is now handled in
configure.in.
m88k, mips, none, ns32k, pa, pyr, romp, rs6000, sparc, tahoe, vax,
z8k}: New directories to hold cpu specific configuration files.
Naming follows gcc convention.
* config/{*.mt, *.mh}: All target and host makefile fragment
config files moved to an appropriate config/<cpu> subdirectory.
* nm-*, xm-*, tm-*: All native, host, and target files, which
get linked to nm.h, xm.h, and tm.h respectively by configure,
moved to appropriate config/<cpu> subdirectory.
* nm-sysv4.h, xm-sysv4.h, tm-sysv4.h, tm-sunos.h, nm-trash.h:
Native, host, and target files that are common across more than
one cpu architecture and included by one of the configured
native, host, or target files, get moved to config directory.
* Makefile.in (INCLUDE_CFLAGS): Add -I${srcdir}/config to
pick up native, host, or target include files moved to one of
the config subdirectories, and that are included by other files.
* Makefile.in (alldeps.mak): Modify to account for new config
directory structure.
* alldeps.mak, depend: Update for new config directory structure.
* config/*/[ntx]m-*.h: Modify all files that include other
[ntx]m-*.h files to use path relative to gdb/config. I.E.
"a29k/tm-ultra3.h" includes "a29k/tm-29k.h" rather than just
"tm-29k.h".
* remote-eb.c (tm-29k.h): Include a29k/tm-29k.h.
* mipsread.c (tm-mips.h): Include mips/tm-mips.h.
* i860-pinsn.c (tm-i860.h): Include i860/tm-i860.h.
* configure.in: Default gdb_host_cpu to host_cpu, and remap
the ones where the default is not unique or different than the
config subdirectory name. Similarly, handle gdb_target_cpu.
Modify configure.in as appropriate to make use of gdb_host_cpu
and gdb_target_cpu to find makefile fragments and make links.
* ieee-float.h: Moved to ../include.
* Makefile.in: Update accordingly.
* i386-pinsn.c (print_insn), m68k-pinsn.c (print_insn):
Convert to stubs that call disassemblers in ../opcodes/*-dis.c.
* m68k-tdep.c: Removed definition of ext_format ext_format_68881;
it is now in ../opcodes/m68881-ext.c.
* mips-tdep.c (mips_skip_prologue): Try to skip more of the
prologue (some callers _do_ care).
* mips-pinsn.c (print_insn), z8k-tdep.c (print_insn): Convert to
new interface of ../opcodes/*-dis.c.
* ch-exp.y: Add #include <ctype.h>.
* xm-hp300bsd.h: Define PSIGNAL_IN_SIGNAL_H and put a compatible
definition here, to handle both BSD 4.3 and 4.4 systems.
* tm-i386bsd.h (NUM_REGS): There are only eleven, not twelve.
an integral number of times.
* language.c (binop_type_check): Extend BINOP_CONCAT for self
concatenation case.
* valarith.c (value_concat): Rewrite to support self
concatenation an integral number of times.
**** start-sanitize-chill ****
* Makefile.in (ch-exp.tab.c): Change "expect" message.
* ch-exp.y (FIXME's): Make all FIXME tokens distinct, to
eliminate hundreds of spurious shift/reduce and reduce/reduce
conflicts that mask the 5 real ones.
* ch-exp.y (STRING, CONSTANT, SC): Remove unused tokens.
* ch-exp.y (integer_literal_expression): Remove production,
no longer used.
**** end-sanitize-chill ****
must include the "-y" option.
* c-exp.y, m2-exp.y (yyrule, yyname, yyss, yyssp, yyvs, yyvsp):
Remove defines to remap non-yacc symbols, thus backing out of
previous recent changes. Standard policy is that non-yacc parser
generators get fixed, rather than adding bug workarounds in gdb
for each new one that pops up. Expand comment to note this.
* c-exp.y, m2-exp.y (YYDEBUG): Revert back to disabled by default.
* Makefile.in (SFILES_MAINDIR): Add typeprint.c, c-typeprint.c,
m2-typeprint.c, c-valprint.c cp-valprint.c m2-valprint.c.
* Makefile.in (HFILES): Add valprint.h.
* Makefile.in (OBS): Add typeprint.o, c-typeprint.o,
m2-typeprint.o, c-valprint.o, cp-valprint.o m2-valprint.o.
* typeprint.c, typeprint.h: New files for language independent
type printing functions.
* c-typeprint.c, m2-typeprint.c: New files for language dependent
type printing functions and definitions.
* valprint.h: New include file for language independent value
printing definitions.
* c-valprint.c, cp-valprint.c, m2-valprint.c: New files for language
dependent value printing functions.
* c-exp.y (production ptype): Add range_type variable and use new
create_range_type function.
* c-exp.y (tokentab2, tokentab3), c-lang.c (c_op_print_tab),
infcmd.c (path_var_name), language.c (unk_op_print_tab),
m2-lang.c (m2_op_print_tab): Change from ANSI-obsolescent
"const static" to ANSI-conformant "static const".
* c-exp.y (c_create_fundamental_type): Remove unused nbytes.
* c-exp.y (c_language_defn, cplus_language_defn): Add c_print_type,
and c_val_print.
* c-lang.h (c_print_type, c_val_print): Add prototypes.
* coffread.c (decode_type): Add range_type variable and call to
new create_range_type function.
* complaints.c (complain): Remove unused val variable.
* complaints.c (_initialize_complaints): Make it void.
* convex-tdep.c (value_of_trapped_internalvar): Add range_type
variable and call new create_range_type function.
* defs.h (enum val_prettyprint): Move enum from value.h to here
so we can avoid having to include value.h just for prototypes that
need the enum (thanks ANSI).
* dwarfread.c (struct_type): Local anonymous_size variable is
only used if !BITS_BIG_ENDIAN.
* dwarfread.c (decode_subscript_data_item): Add rangetype
variable and call new create_range_type function.
* elfread.c (elf_symfile_read): Remove unused dbx and text_sect
variables.
* eval.c (evaluate_subexp): Remove unused local variable name
and the statement with no side effects that initializes it.
* expprint.c (print_subexp): Change local_printstr to
LA_PRINT_STRING.
* gdbtypes.c (create_range_type): New function that creates
a range type using code fragments from object file readers as
an example of what has to be initialized.
* gdbtypes.c (create_array_type): Removed index_type, low_bound,
and high_bound parameters, replaced with a single range_type
parameter. Change function body to use passed in range_type
rather than handcrafting one.
* gdbtypes.h (create_range_type): Add prototype.
* gdbtypes.h (create_array_type): Change prototype parameters.
* infrun.c (normal_stop): Remove unused local variables tem and c.
* infrun.c (hook_stop_stub): Return 0 rather than random value.
* language.c (unk_lang_print_type, unk_lang_val_print): Add
stub functions that call error if called.
* language.c (unknown_language_defn, auto_language_defn,
local_language_defn): Add initializers unk_lang_print_type and
unk_lang_val_print.
* language.h (struct language_defn): Reformat for larger
comments, add la_print_type and la_val_print members. Add
LA_PRINT_TYPE and LA_VAL_PRINT macros. Change local_printchar
to LA_PRINT_CHAR and local_printstr to LA_PRINT_STRING.
* m2-lang.c (m2_create_fundamental_type): Remove unused local
variable nbytes.
* m2-lang.c (m2_language_defn): Add initializers m2_print_type
and m2_val_print.
* m2-lang.h (m2_print_type, m2_val_print): Add prototypes.
* main.c (execute_command): Remove unused local variable cmdlines.
* main.c (echo_command), stabsread.c (read_type), printcmd.c
(clear_displays), symmisc.c (block_depth), values.c
(clear_value_history):
Make testing of truth value of assignment result explicit.
* mipsread.c (upgrade_type): Update FIXME to include future use
of create_range_type.
* printcmd.c (ptype_command, ptype_eval, whatis_command,
whatis_exp, maintenance_print_type): Move prototypes and functions
to new typeprint.c.
* printcmd.c (_initialize_printcmd): Move add_com calls for
ptype_command and whatis_command to new typeprint.c.
* ser-bsd.c (serial_open): Remove unused variable sgttyb.
* source.c (find_source_lines): Local variable c only used
when LSEEK_NOT_LINEAR is defined.
* stabsread.c (read_array_type): Use new create_range_type
function.
* stabsread.c (read_range_type): Add new index_type variable and
call new create_range_type function rather than handcrafting
range types.
* symmisc.c (type_print_1): Change usages to LA_PRINT_TYPE.
* symtab.c (typedef_print usages): Use c_typedef_print, renamed.
* symtab.c (type_print_base usages): Use c_type_print_base.
* symtab.c (type_print_varspec_prefix usages): Use
c_type_print_varspec_prefix.
* symtab.c (type_print_method_args usages): Use
cp_type_print_method_args.
* valprint.c: Completely ripped apart and the fragments used
to create c-valprint.c, cp-valprint.c, m2-valprint.c, and
valprint.h. Remaining stuff is language independent.
* value.h (struct fn_field): Forward declare for prototypes.
* value.h (type_print_1): Remove prototype.
* value.h (enum val_prettyprint): Moved to defs.h.
* value.h (typedef_print): Prototype renamed to c_typedef_print.
* value.h (baseclass_offset): Add prototype.
**** start-sanitize-chill ****
* Makefile.in (SFILES_MAINDIR): Add ch-typeprint.c, ch-valprint.c.
* Makefile.in (OBS): Add ch-typeprint.o, ch-valprint.o.
* ch-typeprint.c: New file for language dependent type printing.
* ch-valprint.c: New file for language dependent value printing.
* ch-exp.y (parse_number): Remove prototype and stub function.
* ch-exp.y (decode_integer_literal): Removed unused digits and
temp variables.
* ch-exp.y (convert_float): Completely ifdef out for now.
* ch-exp.y (tokentab2, tokentab3, tokentab4, tokentab5),
ch-lang.c (chill_op_print_tab):
Change from ANSI-obsolescent "const static" to ANSI-conformant
"static const".
* ch-exp.y (yylex): Add unhandled storage class enumeration
literals to switch statement for completeness.
* ch-lang.c (chill_create_fundamental_types): Remove unused
nbytes variable. Change dummy type to 2 bytes to match int.
Handle FT_VOID types gratuituously added to chill DWARF by
compiler. Change FT_CHAR case to generate an TYPE_CODE_CHAR
type rather than a one byte TYPE_CODE_INT type.
* ch-lang.c (chill_language_defn): Add chill_print_type and
chill_val_print.
* ch-lang.h (chill_print_type, chill_val_print): Add prototypes.
**** end-sanitize-chill ****
* complaints.c (complain): Made into a varargs function.
* complaints.h: New file, code moved from symfile.h.
* Makefile.in (SFILES_MAINDIR): Add complaints.c.
* Makefile.in (HFILES): Add complaints.h.
* Makefile.in (OBS): Add complaints.o.
* symfile.c (complaint_root, stop_whining, complaint_series,
complain, clear_complaints, add_show_from_set for stop_whining):
Moved to complaints.c.
* symfile.h (struct complaint, complaint_root decl, complain
prototype, clear_complaints prototype): Moved to complaints.h.
* buildsym.c, coffread.c, dbxread.c, dwarfread.c, elfread.c,
gdbtypes.c, mipsread.c, stbsread.c, symfile.c: Include
complaints.h. Remove casts from arguments to complain(),
which is now a varargs function, and remove unnecessary
placeholder zero args.
* defs.h (begin_line): Add prototype.
* defs.h (vprintf_filtered): Add prototype.
* dwarfread.c (varargs.h): Remove, no longer needed.
* dwarfread.c (dwarfwarn): Remove prototype and function.
* dwarfread.c (complaints): Define a bunch of complaints.
* dwarfread.c (SQUAWK): Remove macro defs, convert all
usages to standard complain() calls.
* utils.c (begin_line): New function that ensures that
whatever gets filter-printed next starts on its own line.
* utils.c (vprintf_filtered): New func, like vfprintf_filtered,
but to stdout (calls vfprintf_filtered internally).
29k-share/dfe/mini2udi.o.
* config/a29k-udi.mt: Remove yank.o and mini2udi.o.
* alldeps.mak, depend: Update to deal with removal of
aforementioned files.
* remote-udi.c: Major cleanups. Clean up udi_open and drop
requirement for useless 'program' argument. Clean up
udi_create_inferior, and udi_load to call common download()
routine. Create download routine to load remote hosts directly
(with the help of BFD) so that we don't need yank.c and
mini2udi.c.
Fix udi_detach to call UDIDisconnect with
the right arguments. Clean up udi_resume, don't assign tip_error
twice. Clean up udi_wait, straighten out status codes. Make
udi_kill really work.
remap all malloc's to xmalloc's and all realloc's to xrealloc's.
* c-exp.y, m2-exp.y: Add comment about how malloc/realloc are
remapped to xmalloc/xrealloc, use only malloc/realloc in grammer
file. Remove preprocessor defines that previously did remapping.
* dwarfread.c: include <sys/types.h> for SCO.
* infptrace.c: Don't include ptrace.h under SCO.
* config/i386sco.mh: Use -D_POSIX_SOURCE instead of -posix for
gcc.
* config/i386v.mt: Add exec.o to TDEPFILES.
(OBS): Put version.o first, so Makefile rebuild happens early.
* command.h: Publicize prototype for not_just_help_class_command.
* command.c: Remove proto.
* maint.c: Mark "mt" as an abbrev, to avoid duplicated help
output. Move "maint info" from class info to class maintenance,
and improve text.
* infrun.c: Move "stop" to class_obscure, and give it a
function so it will not be seen as a global help topic. FIXME,
it should be possible to set these attributes independently.
* core.c (core_command): Make nicer error message for no core support.
* nindy-share/nindy.c (coffstrip): Use that pathname, instead of searching for
a "bfd_strip" program. Also, fixed up arguments passed to that program.
* tm-nindy960.h (ADDITIONAL_OPTIONS): Use "-ser" rather than "-r", which is now
used for something else. Rewrite description of associated parameters to match
how gdb does it now.
(ADDITIONAL_OPTION_HELP): Fix message accordingly.
* m68k-pinsn.c (print_insn_arg): Handle new "`" operand type.
in the ser-*.c files. Needed for some systems, such as GO32, which don't
have stuff like <termios.h>. Makefile.in now uses $(REMOTE), which defaults
to remote.o, instead of remote.o.
* remote-udi.c (udi_resume): Clean up.
* (udi_wait): Rewrite, leave out bugs.
* Add debugging code to print out all register fetches and stores.
* Straighten out target_ops.
* tm-29k.h (DUMMY_FRAME_RSIZE): Pad out to doubleword.
* Makefile.in (TSOBS): removed corelow.o.
* infptrace.c: included nat.h.
* nat-trash.h: temporary header file. This should be removed once
all hosts have the native/host/target split.
* configure.in: add a symlink from nat-trash.h to nat.h if no
other nat file exists for this configuration.
* sparc-tdep.c: no longer include sys/ptrace.h.
* sparc-xdep.c: removed. contents have been moved to nat-sparc.c.
* xm-sparc.h (ATTACH_DETACH, FETCH_INFERIOR_REGISTERS): moved to
nat-sun4os4.h.
* nat-sparc.c, nat-sun4os4.h: new files for sun4 native support.
* config/sun4os4.mh (XDEPFILES): moved infptrace.o and inftarg.o
to NATDEPFILES. removed sparc-xdep.o.
(NATDEPFILES, NAT_FILE): new macros for native support.
config/*.mh files.
* config/*.mh: Add inftarg.o and fork-child.o to all *.mh that
reference infptrace.o. Add fork-child.o to all *.mh that
reference procfs.o.
respectively, so same demangler can be used by other programs.
* Makefile.in: Remove demangler stuff.
* Makefile.in (depend): Pass -I../readline (needed for main.c).
* demangle.c (_initialize_demangler): Tell demangler which
CPLUS_MARKER to assume.
* dwarfread.c (scan_partial_symbols): Skip over DIE's within
function scopes when building partial symbol tables.
* objfiles.c (open_existing_mapped_file): Make it clear in
warning message that out of date mapped files are ignored.
* symtab.c (lookup_symtab_1, lookup_symbol): Print compilation
unit source file name in error message.
demangling style for C++. Defaults to "auto".
* Makefile.in (DEMANGLE_OPTS): Use DEMANGLING_STYLE.
* Makefile.in (SFILES_MAINDIR): Add demangle.c
* Makefile.in (OBS): Add demangle.o
* cplus-dem.c (GNU_DEMANGLING, ARM_DEMANGLING, LUCID_DEMANGLING):
Remove compile time decisions about demangling style and replace
with runtime decisions using current_demangling_style.
* cplus-dem.c (main): Expand code included during building of
standalone demangler to recognize demangling style options.
* dbxread.c (demangle.h): Include.
* dbxread.c (read_ofile_symtab, process_one_symbol): Set GNU C++
demangling style if processing g++ code and current demangling style
is auto (Note: this feature currently disabled.)
* demangle.c: New file, generic demangling control.
* demangle.h (demangling_styles): New enumeration to select one
of several demangling styles. Also define string names for each
style.
* demangle.h (set_demangling_style): Add prototype.
* dwarfread.c (demangle.h): Include.
* dwarfread.c (GPLUS_PRODUCER, LCC_PRODUCER, CFRONT_PRODUCER):
New producer string prefixes to recognize.
* dwarfread.c (handle_producer): Consolidate actions for specific
producers. Set demangling style based on producer string if
current style is auto. (Note: this feature currently disabled.)
* config/ncr3000.mt (DEMANGLE_OPTS): Remove.
* Makefile.in (SFILES_MAINDIR): Add new file maint.c.
* Makefile.in (OBS): Add new file maint.o.
* defs.h (command_class): Add class_maintenance.
* defs.h (MAINTENANCE_CMDS): Default to including maintenance
commands. Allow for them (and other nonessential parts of gdb)
to be selectively left out under special circumstances.
* gdbtypes.c (recursive_dump_type): New function; supports
maintenance print-type command.
* gdbtypes.h (recursive_dump_type, maintenance_print_type):
Add prototypes.
* main.c (maintenancelist, maintenanceinfolist): Add maintenance
command lists.
* main.c (initialize_cmd_lists): Eliminate unnecessary casts on
initializers. Add initializations for setprintlist, showprintlist,
setchecklist, showchecklist, maintenancelist, and maintenanceinfolist.
* printcmd.c (maintenance_print_type): New maintenance cmd.
* valprint.c (setprintlist, showprintlist): Move to main.c, as
implied by comment that all cmd lists are owned by main.c.
* infcmd.c (unsetlist): Move to main.c, as implied by comment
that all cmd lists are owned by main.c.
* language.c (setchecklist, showchecklist): Move to main.c, as
implied by comment that all cmd lists are owned by main.c
* breakpoint.c (enablelist, enablebreaklist, disablelist, cmdlist,
deletelist): Remove redundant declarations (also in gdbcmd.h).
* symmisc.c (printsyms_command): Now maintenance_print_symbols.
* symmisc.c (printmsyms_command): Now maintenance_print_msymbols.
* symmisc.c (printpsyms_command): Now maintenance_print_psymbols.
* symmisc.c (printobjfiles_command): Now maintenance_print_objfiles.
* symtab.h (maintenance_print_symbols, maintenance_print_psymbols,
maintenance_print_msymbols, maintenance_print_objfiles):
Add prototypes.
* symmisc.c (printsyms_command, printpsyms_command,
printmsyms_command, printobjfiles_command): Removed from
_initialize_symmisc.
* main.c (dump_me_command): Moved to maint.c and renamed to
maintenance_dump_me.
* breakpoint.c (all_breakpoints_info): Rename to
maintenance_info_breakpoints.
* breakpoint.c (_initialize_breakpoint): Convert add_info of
all_breakpoints_info to add maintenance_info_breakpoints to the
maintenanceinfolist instead.
main.c (initialize_main): Set up maintenance class commands.
* cplus-dem.c (demangle_args): Validate index for previously
seen type to guard against bogus values from malformed manglings.
* valops.c (value_struct_elt_for_reference): Guard against
blindly using NULL return value from lookup_symbol.
consistency with all other gdb files.
* cadillac.c: Use <string.h> rather than <strings.h>.
* cadillac.c (kernel_dispatch): Convert rindex usage to strrchr.
* Makefile.in (MAKE): Remove definition for consistency with
other Makefile.in files and to fix problem with recursive makes.
* coffread.c (coff_end_symtab): Cast 2nd arg of complain() to
correct type.
* defs.h (NORETURN): Define away for Lucid compiler.
* remote.c (remote_timer, remote_interrupt): Signal handlers
take one int arg.
* ser-termios.c (serial_write, serial_close): Return whatever
value the write/close call returns, rather than falling off end.
* inferior.h (PTRACE_ARG3_TYPE): Third arg to ptrace is int on
more systems than it is "char *". Define PTRACE_ARG3_TYPE to
default to int.
* infptrace.c, hppabsd-xdep.c, hppahpux-xdep.c, i386-xdep.c,
inferior.h (call_ptrace): Use PTRACE_ARG3_TYPE to declare type
of third arg.
* a68v-xdep.c, arm-xdep.c, convex-xdep.c, hp300ux-xdep.c, infrun.c,
m88k-xdep.c, mach386-xdep.c, mips-xdep.c, os68k-xdep.c, pyr-tdep.c,
pyr-xdep.c, rs6000-xdep.c, sparc-xdep.c, sun3-xdep.c, sun386-xdep.c,
symm-xdep.c, ultra3-xdep.c: Use PTRACE_ARG3_TYPE to cast ptrace
argument 3.
* sparc-xdep.c, a68v-xdep.c (fetch_inferior_registers,
store_inferior_registers): Supply missing fourth argument to
ptrace().
declarations of malloc/realloc/free that are inserted by some
versions of yacc.
* m2-exp.y: Prevent conflicts with TRUE and FALSE tokens by
#undeffing them.
* xm-rs6000.h: Declare malloc/realloc/free appropriately. Yet
another decl of strdup (this really ought to come from libiberty.h!).
* symtab.c (decode_line_1): Until C++ support stabilizes, when
C++ lookups fail, print possibly helpful hint about completion.
* cplus-dem.c (demangle_signature): Fix ARM style demangling
for static data members.
* dbxread.c (dbx_psymtab_to_symtab_1): Fix prototype.
* config/ncr3000.mh (INSTALL): Don't use /usr/ucb/install,
it's broken on ncr3000's.
* Makefile.in, config/*.mh, config/*.mt: Rename TM_CFLAGS
to MT_CFLAGS, XM_CFLAGS to MH_CFLAGS to match file names.
* config/sun4os5.mh: Add MH_CFLAGS=-xs to save debug info.
* Makefile.in (DEMANGLE_OPTS): Remove obsolete -Dnounderscore
* Makefile.in (demangle): New target to create standalone
demangler with same code and options as internal demangler.
* cplus-dem.c: Massive restructuring, rewriting, cleanups, etc
to support ARM style and Lucid style demangling, improve
maintainability, fix several demangling bugs. More changes
to follow.
* defs.h (strstr): Add ANSI compatible prototype.
* valprint.c (type_print_1): Demangle using ansi option.
* config/ncr3000.mt (DEMANGLE_OPTS): Remove -Dnounderscore.
29k-share/dfe/yank.c, vx-share/xdr_ptrace.c, vx-share/xdr_regs.c:
Remove -I29k-share, -Ivx-share from Makefile.in. Make #includes
relative to each source file.
