* config/tc-mips.c: Use signed add for n32 address arithmetic.
(append_insn): When filling delay slots with instructions
that have fixups that tc_gen_reloc might consider modifyable
in variant frags, start a new frag.
(load_address): Generate GOT_DISP with of without offset
depending on whether symbol is local. For -xgot, use
GOT_PAGE/GOT_OFST or GOT_HI16/GOT_LO16.
(macro) <M_DLA_AB, M_LA_AB>: Likewise.
<M_JAL_A>: In NewABI, use CALL16 or GOT_DISP for small got,
CALL_HI16/CALL_LO16 or GOT_PAGE/GOT_OFST for big got.
<ld_st>: In NewABI with small got, always use
GOT_PAGE/GOT_OFST, with the latter in the load/store
instruction. With big got, use GOT_HI16/GOT_LO16 or
GOT_PAGE/GOT_OFST.
(tc_gen_reloc): Adjust variant frags with GOT_DISP in NewABI.
Add tc_frag_data.tc_fr_offset to addends. Decay CALL16,
GOT_OFST and GOT_DISP to GOT_DISP in NewABI.
(md_convert_frag): Use memmove for safe copying of overlapping
regions.
-mlong, -mshort-double and -mlong-double options; use table @code.
(M68HC11-Syntax): Update to document 68HC12 operands.
(M68HC11-Modifiers): New section for operand modifiers.
(M68HC11-Directives): New section for specific assembler directives.
(M68HC11-Branch): Fix Overfull hbox error.
constant address that Alexandre took out by accident. Reject
64-bit addresses that are not sign extensions of 32 bits only if
we don't support 64-bit address constants.
* cgen.c (gas_cgen_begin): New function. If flag_signed_overflow_ok is set
call cgen_set_signed_overflow_ok otherwise call cgen_clear_signed_overflow_ok.
* cgen.h: Prototype gas_cgen_begin.
* testsuite/gas/m32r/m32r.exp: Run signed-relocs test.
* testsuite/gas/m32r/signed-relocs.s: New file: Test signed relocs.
* testsuite/gas/m32r/signed-relocs.d: New file: Expected results
(M6811_OP_PAGE_ADDR): New internal define.
(get_operand): New modifier %page and %addr to obtain page and
address part of a far-function.
(fixup8): Use BFD_RELOC_M68HC11_PAGE for a %page modifier; don't
complain on overflow for the BFD_RELOC_M68HC11_PAGE and truncation
relocs.
(fixup16): Use BFD_RELOC_M68HC11_LO16 for a %addr modifier.
(find_opcode): Add comment.
(md_estimate_size_before_relax): Force relocation of
STATE_UNDEXED_OFFSET types when the symbol is not absolute.
(tc_m68hc11_fix_adjustable): Check for BFD_RELOC_M68HC11_LO16
instead of BFD_RELOC_LO16; temporarily make the BFD_RELOC_32
on the symbol itself so that DWARF2 strings are merged correctly.
2003-04-02 Chris Demetriou <cgd@broadcom.com>
* config/tc-mips.c (macro2): Adjust implementation of
M_ULH, M_ULHU, M_ULW, and M_ULD so that they work properly
in the case where the source and destination registers
are the same.
[ gas/testsuite/ChangeLog ]
2003-04-02 Chris Demetriou <cgd@broadcom.com>
* gas/mips/ulh.d: Adjust for ulh and ulhu macro assembly changes.
* gas/mips/mips.exp: Define new "gpr_ilocks" architecture
property, and add it to mips2 (and later) chips and r3900.
* gas/mips/uld2.s: New test source file.
* gas/mips/ulh2.s: Likewise.
* gas/mips/ulw2.s: Likewise.
* gas/mips/uld2.l: New test stderr listing.
* gas/mips/ulh2.l: Likewise.
* gas/mips/ulw2.l: Likewise.
* gas/mips/uld2-eb.d: New test.
* gas/mips/uld2-el.d: Likewise.
* gas/mips/ulh2-eb.d: Likewise.
* gas/mips/ulh2-el.d: Likewise.
* gas/mips/ulw2-eb-ilocks.d: Likewise.
* gas/mips/ulw2-eb.d: Likewise.
* gas/mips/ulw2-el-ilocks.d: Likewise.
* gas/mips/ulw2-el.d: Likewise.
* gas/mips/mips.exp: Run new tests for appropriate architectures.
(current_arch_mask): Rename to current_mode_mask.
(current_arch_requested): Remove variable.
(current_cpu): New variable.
(init_default_arch): Set defaults values for s390_arch_size,
current_mode_mask and current_cpu.
(md_parse_option): New options -mesa, -mzarch and -march={g5,g6,z900}.
(md_begin): Replace current_arch_mask by current_cpu.
(md_assemble): Adapt check and error message to current_mode_mask and
current_cpu.
gcc:
* config/sh/sh.h (EXTRA_SPECS): Add subtarget_asm_relax_spec and
subtarget_asm_isa_spec.
(SUBTARGET_ASM_RELAX_SPEC, SUBTARGET_ASM_ISA_SPEC): Define.
(ASM_SPEC): Define as SH_ASM_SPEC.
(SH_ASM_SPEC): New; take the role of ASM_SPEC, but safe from svr4.h.
Use subtarget_asm_relax_spec and subtarget_asm_isa_spec.
* config/sh/elf.h (ASM_SPEC): Use SH_ASM_SPEC.
(SUBTARGET_ASM_ISA_SPEC): Undef / define.
gcc/testsuite:
gcc.dg/sh-relax.c: New test.
include/elf:
* sh.h (EF_SH_MERGE_MACH): Make sure SH2E & SH3/SH3E merge to SH3E,
and SH2E & SH4 merge to SH4, not SH2E.
gas:
* config/tc-sh.c (sh_dsp): Replace with preset_target_arch.
(md_begin): Use preset_target_arch.
(md_longopts): Make isa option unconditional.
(md_parse_option): Make OPTION_DSP and OPTION_ISA sh4 / any
set preset_target_arch.
(md_apply_fix3): If BFD_ASSEMBLER, adjust SWITCH_TABLE fixups
by -S_GET_VALUE (fixP->fx_subsy).
(tc_gen_reloc): For SWITCH_TABLE fixups, the symbol is fixp->fx_subsy,
and the addend is 0.
Adjust addend of R_SH_IND12W relocations by fixp->fx_offset - 4.
* config/tc-sh.h (TC_FORCE_RELOCATION_SUB_LOCAL): Define.
bfd:
elf32-sh.c (sh_elf_howto_tab): Make R_SH_IND12W into an ordinary
relocation (no special function), and make it non-partial_inplace.
(sh_elf_relax_section): When creating a bsr, use a consistent value
no matter if the symbol is extern or not; set addend to -4.
Don't swap load / non-load instructions for SH4.
(sh_elf_relax_delete_bytes): In R_SH_IND12W case, check the offset
rather than if the symbol is external to determine if adjusting the
offset makes sense. Adjust the addend too if appropriate.
(sh_elf_relocate_section): In R_SH_IND12W, don't fiddle with the
relocation.
