(branch_dest): Remove unused variable "offset".
(pop_dummy_frame): Add prototype and make static.
(push_arguments): Guard against using len uninitialized.
(push_arguments): Guard against using arg uninitialized.
(frame_saved_pc): Remove unused variable "frameless".
(free_loadinfo): Ifdef out unused function.
* config/rs6000/rs6000.mh (NATDEPFILES): Move xcoffread.o ...
* config/rs6000/rs6000.mt (TDEPFILES): ... to here
* xcoffsolib.c (xcoff_relocate_symtab_hook): Define and initialize.
(solib_info): Call xcoff_relocate_symtab via the hook.
(sharedlibrary_command): Ditto.
* xcoffread.c: Remove all FAKING_RS6000 comments and defines.
(xcoff_add_toc_to_loadinfo_hook): Define and initialize here.
(xcoff_init_loadinfo_hook): Define and initialize here.
(scan_xcoff_symtab): Call xcoff_add_toc_to_loadinfo via the hook.
(xcoff_initial_scan): Call xcoff_init_loadinfo via the hook.
* xcoffsolib.h (xcoff_relocate_symtab_hook): Declare extern func.
* rs6000-tdep.c (_initialize_rs6000_tdep): Add initializations
of xcoff_add_toc_to_loadinfo_hook and xcoff_init_loadinfo_hook.
* rs6000-nat.c (_initialize_core_rs6000): Add initialization
of xcoff_relocate_symtab_hook.
* tm-ppc-eabi.h (PC_IN_CALL_DUMMY): Redefine this to work with the
simulator. FIXME.
* rs6000-tdep.c (push_dummy_frame): Calculate the correct link
register offset from the current frame (don't assume it is always 8).
(push_dummy_frame): Add comment about having only 4096 bytes of
stack space in the simulator (by default).
* remote-sim.c (gdbsim_create_inferior): Call
`add_text_to_loadinfo' so that gdb can find TOC entries when
calling functions in the inferior.
With this changes, it is now possible to correctly call inferior
functions in the PPC simulator.
of aix4 need different handling than aix3.
* configure: Updated.
* config/powerpc/{aix4.mh,aix4.mt,tm-ppc-aix4.h}: New files
specific to aix4 support on the power pc.
* config/powerpc/tm-ppc-aix.h (DONT_RELOCATE_SYMFILE_OBJFILE): Do
not defined. The aix4 specific target files will do that.
* config/rs6000/{aix4,mh,aix4,mt,tm-rs6000-aix4.h}: New files
specific to aix4 support on the rs6000.
* config/rs6000/tm-rs6000.h (CONVERT_FROM_FUNC_PTR_ADDR): Don't
do the conversion if the pointer is not a magic aix function
pointer.
* rs6000-tdep.c: Include objfiles.h and symtab.h.
(is_magic_function_pointer): New function.
* rs6000-tdep.c (skip_prologue): Refine check for frameless
functions. Handle b .+4 emitted by aix4 compilers. Only
allow one load of a minimal toc pointer. Handle aix4 compiler's
code for alloca.
* rs6000-tdep.c (find_toc_address): Report an error if no toc was
found rather than possibly core dumping.
* partial-stab.h: Handle extra field generated by the aix4 compiler
for enumerations.
* stabsread.c (read_enum_type): Likewise.
before trying to determine the start of the function.
(skip_prologue): Skip subroutine call which might save the
floating point registers only if it is within the first three
instructions.
Reinstate setting of alloca_reg if setup of a gcc frame pointer
is found.
(frame_get_cache_fsr): Use new fields in rs6000_framedata.
* symfile.c, symfile.h (init_psymbol_list): New function;
consolidate duplicated copies from os9kread.c, dbxread.c
and dwarfread.c.
* defs.h: Declare info_verbose.
* xcoffread.c: Extensive changes to support psymtabs.
symbol_completion_function, takes the line buffer and the
point in the line buffer as additional arguments.
(readline_line_completion_function): New function, interface
between readline and line_completion_function.
(init_main): Use it.
(complete_command): Use line_completion_function instead of
abusing rl_line_buffer. Free completion strings after printing
them.
* symtab.c (completion_list_add_name): Recheck for duplicates
if we intend to add a modified symbol.
* gdbtypes.h (cplus_struct_type): nfn_fields_total no longer
includes the number of methods from the baseclasses.
* stabsread.c (attach_fn_fields_to_type): No longer add the
number of methods from the baseclasses to TYPE_NFN_FIELDS_TOTAL,
the baseclass type might not have been completely filled in yet.
* symtab.c (total_number_of_methods): New function to compute
the total number of methods for a type, including the methods
from baseclasses.
(decode_line_1): Use it instead of TYPE_NFN_FIELDS_TOTAL to
allocate the symbol array for find_methods.
* stabsread.c (scan_file_globals): Add default case to minimal
symbol type switch, to avoid gcc -Wall warnings.
* config/rs6000/tm-rs6000.h (INIT_EXTRA_FRAME_INFO):
Don't test for zero backchain pointer to recognize a signal
handler frame, if read() gets interrupted by a signal, the
backchain will be non zero.
(SIG_FRAME_FP_OFFSET): Move to here from rs6000-tdep.c,
improve comment.
(SIG_FRAME_PC_OFFSET): New definition.
(FRAME_SAVED_PC): Return saved pc from sigcontext if this
is a signal handler frame.
* rs6000-tdep.c (function_frame_info): Do not error out
if we can't access the instructions.
* config/rs6000/tm-rs6000.h (CONVERT_FROM_FUNC_PTR_ADDR):
New definition to get the function address from a function pointer.
* valops.c (find_function_addr): Use it when calling a user
function through a function pointer.
rule, which was not addressed by the previous change.
* rs6000-tdep.c (skip_prologue): Handle `mr r31,r1', which is
generated by gcc-2.6, as a synonym for `oril r31,r1,0'.
* TODO: Remove item about RS/6000 shared libraries.
of using longest_to_int.
* infcmd.c (run_stack_dummy): Reinstate set_current_frame call,
mips and alpha targets need the real breakpoint pc for
creating the breakpoint frame.
* stack.c (return_command): Cast return value to the return
type of the function from which we return.
* values.c (set_return_value): Pass VALUE_CONTENTS unmodified
to STORE_RETURN_VALUE.
* symtab.c (lookup_symbol): Remove search for `static mangled
symbols', the search for `static symbols' already looks for
mangled and demangled symbols via lookup_block_symbol.
* valarith.c (value_binop): Use ANSI C arithmetic conversions
when performing integral evaluations, implement BINOP_EQUAL and
BINOP_LESS.
(value_equal, value_less): Use value_binop to perform the
comparison if both operands have TYPE_CODE_INT.
* rs6000-tdep.c (pop_frame): Make sure all registers are valid,
as they are written back later. Handle sp restore for frameless
functions. Use fdata.nosavedpc instead of fdata.frameless to
determine if the pc has been saved.
(function_frame_info): Handle `mr r31,r1', which is generated by
gcc-2.6, as a synonym for `oril r31,r1,0'.
(skip_trampoline_code): Handle shared library trampolines.
* xcoffread.c (read_xcoff_symtabs): Record XMC_GL symbols with
their real name. Enables setting of breakpoints in shared libraries
before the executable is run.
and stack pointer during stepping, to speed things up.
A. Changes to not select a frame until we need a selected frame:
* blockframe.c (flush_cached_frames): Call select_frame (NULL, -1).
* infrun.c (wait_for_inferior): Move call to select_frame back to
normal_stop. This reverts a change of 13 Apr 94 (it says Jeff
Law, but the change was my idea); the only reason for that change
was so we could save and restore the selected frame in
wait_for_inferior, and now that flush_cached frames clears the
selected frame, that should work OK now.
B. Changes to not create a current_frame until we need one:
* blockframe.c (get_current_frame): If current_frame is NULL, try
to create an innermost frame.
* sparc-tdep.c (sparc_pop_frame), infcmd.c (run-stack_dummy),
infrun.c (wait_for_inferior), thread.c (thread_switch),
convex-tdep.c (set_thread_command), a29k-tdep.c (pop_frame),
alpha-tdep.c (alpha_pop_frame), convex-xdep.c (core_file_command),
h8300-tdep.c (h8300_pop_frame), h8500-tdep.c (h8300_pop_frame),
hppa-tdep.c (hppa_pop_frame), i386-tdep.c (i386_pop_frame),
i960-tdep.c (pop_frame), m68k-tdep.c
(m68k_pop_frame), mips-tdep.c (mips_pop_frame), rs6000-tdep.c
(push_dummy_frame, pop_dummy_frame, pop_frame), sh-tdep.c
(pop_frame), config/arm/tm-arm.h (POP_FRAME),
config/convex/tm-convex.h (POP_FRAME), config/gould/tm-pn.h
(POP_FRAME), config/ns32k/tm-merlin.h (POP_FRAME),
config/ns32k/tm-umax.h (POP_FRAME), config/tahoe/tm-tahoe.h
(POP_FRAME), config/vax/tm-vax.h (POP_FRAME): Don't
call create_new_frame.
* corelow.c (core_open), altos-xdep.c (core_file_command),
arm-xdep.c (core_file_command), gould-xdep.c (core_file_command),
m3-nat.c (select_thread), sun386-nat.c (core_file_command),
umax-xdep.c (core_file_command): Don't call create_new_frame; do
call flush_cached_frames.
* blockframe.c (reinit_frame_cache): Don't call create_new_frame
or select_frame.
C. Changes to get rid of stop_frame_address and instead only
fetch the frame pointer when we need it.
* breakpoint.c (bpstat_stop_status): Remove argument
frame_address; use FRAME_FP (get_current_frame ()).
* infrun.c (wait_for_inferior): Don't pass frame pointer to
bpstat_stop_status.
* infrun.c (wait_for_inferior): Use FRAME_FP (get_current_frame
()) instead of stop_frame_address.
* infrun.c (save_inferior_status, restore_inferior_status),
inferior.h (struct inferior_status): Don't save and restore
stop_frame_address.
* inferior.h, infcmd.c, thread.c (thread_switch), m3-nat.c
(select_thread): Remove stop_frame_address and uses thereof.
D. Same thing for the stack pointer.
* infrun.c (wait_for_inferior): Remove stop_sp and replace
uses thereof with read_sp ().
E. Change to eliminate one nasty little spot where we were
wanting to know the frame pointer from before the current step
(idea from GDB 3.5, which saved my ass, because my other ideas of
how to fix it were very baroque).
* infrun.c: Remove prev_frame_address.
* infrun.c (wait_for_inferior, step_over_function): Use
step_frame_address instead of prev_frame_address.
F. Same basic idea for the stack pointer.
* inferior.h, infcmd.c: New variable step_sp.
* infcmd.c (step_1, until_next_command): Set it.
* infrun.c: Remove prev_sp and replace uses by step_sp.
* infrun.c (wait_for_inferior): If we get out of the step
range, then set step_sp to the current stack pointer before we
start going again.
Change all references to stdout/stderr to gdb_stdout/gdb_stderr.
Replace all calls to stdio output functions with calls to
corresponding _unfiltered functions (`fprintf_unfiltered')
Replaced calls to fopen for output to gdb_fopen.
Added sufficient goo to utils.c and defs.h to make the above work.
The net effect is that stdio output functions are only directly used
in utils.c. Elsewhere, the _unfiltered and _filtered functions and
GDB_FILE type are used.
In the near future, GDB_FILE will stop being equivalant to FILE.
The semantics of some commands has changed in a very subtle way:
called in the right context, they may cause new occurences of
prompt_for_continue() behavior. The testsuite doesn't notice anything
like this, though.
Please respect this change by not reintroducing stdio output
dependencies in the main body of gdb code. All output from commands
should go to a GDB_FILE.
Target-specific code can still use stdio directly to communicate with
targets.
({extract,store}_{signed_integer,unsigned_integer,address}):
New routines to replace SWAP_TARGET_AND_HOST.
All over: All uses of SWAP_TARGET_AND_HOST on integers replaced.
* frame.h (struct frame_info): Doc fix for next_frame.
New field signal_handler_caller.
blockframe.c (create_new_frame, get_prev_frame_info),
config/rs6000/tm-rs6000.h (INIT_EXTRA_FRAME_INFO): Set it (needs
INIT_FRAME_PC_FIRST).
stack.c (print_frame_info), rs6000-tdep.c (rs6000_frame_chain):
Check it.
* command.c (do_setshow_command): Use %u with var_{u,z}integer.
* command.{c,h}: New var_type var_integer.
main.c: Use it for history_size.
* rs6000-tdep.c, xcoffexec.c, config/rs6000/xm-rs6000.h, breakpoint.c:
Lint and byte-order fixups.
