(alpha_register_raw_size): Ditto.
(alpha_register_virtual_size): Ditto.
(alpha_skip_prologue_internal): Renamed from
alpha_skip_prologue.
(alpha_skip_prologue): New version that calls
alpha_skip_prologue_internal.
(alpha_in_lenient_prologue): Use alpha_skip_prologue_internal.
* config/alpha/tm-alpha.h (SKIP_PROLOGUE): Remove
second argument from alpha_skip_prologue.
(REGISTER_BYTE): Use alpha_register_byte.
(REGISTER_RAW_SIZE): Use alpha_register_raw_size.
(REGISTER_VIRTUAL_SIZE): Use alpha_register_virtual_size.
(FRAMELESS_FUNCTION_INVOCATION): Use
generic_frameless_function_invocation_not.
(FRAME_NUM_ARGS): Use frame_num_args_unknown.
(COERCE_FLOAT_TO_DOUBLE): Use standard_coerce_float_to_double.
(alpha_init_frame_pc_first): Ditto.
(alpha_fix_call_dummy): Ditto.
(alpha_store_struct_return): Ditto.
(alpha_extract_struct_value_address): Ditto.
* config/alpha/tm-alpha.h (REGISTER_VIRTUAL_TYPE): Use
alpha_register_virtual_type.
(STORE_STRUCT_RETURN): Use alpha_store_struct_return.
(EXTRACT_STRUCT_VALUE_ADDRESS): Use
alpha_extract_struct_value_address.
(FIX_CALL_DUMMY): Use alpha_fix_call_dummy.
(INIT_FRAME_PC): Use init_frame_pc_noop.
(INIT_FRAME_PC_FIRST): Use alpha_init_frame_pc_first.
(alpha_find_saved_regs): Make static. Use
frame->extra_info.
(alpha_frame_init_saved_regs): New function.
(alpha_frame_saved_pc): Use frame->extra_info.
(temp_saved_regs): Don't declare as struct frame_saved_regs.
(heuristic_proc_desc): Adjust for temp_saved_regs changes.
(init_extra_frame_info): Rename to...
(alpha_init_extra_frame_info): ...this. Use frame->extra_info.
(alpha_print_extra_frame_info): New function.
(alpha_frame_locals_address): Ditto.
(alpha_frame_args_address): Ditto.
(alpha_pop_frame): Use frame->extra_info.
* config/alpha/tm-alpha.h (FRAME_ARGS_ADDRESS): Use
alpha_frame_args_address.
(FRAME_LOCALS_ADDRESS): Use alpha_frame_locals_address.
(alpha_find_saved_regs): Remove prototype.
(FRAME_INIT_SAVED_REGS): Use alpha_frame_init_saved_regs.
(EXTRA_FRAME_INFO): Remove.
(INIT_EXTRA_FRAME_INFO): Use alpha_init_extra_frame_info.
(PRINT_EXTRA_FRAME_INFO): Use alpha_print_extra_frame_info.
(alpha_cannot_fetch_register): Ditto.
(alpha_cannot_store_register): Ditto.
(alpha_register_convertible): Ditto.
(alpha_use_struct_convention): Ditto.
* config/alpha/tm-alpha.h: Update copyright years.
(IN_SIGTRAMP): Use alpha_osf_in_sigtramp.
(INNER_THAN): Use core_addr_lessthan.
(CANNOT_FETCH_REGISTER): Use alpha_cannot_fetch_register.
(CANNOT_STORE_REGISTER): Use alpha_cannot_store_register.
(REGISTER_CONVERTIBLE): Use alpha_register_convertible.
(USE_STRUCT_CONVENTION): Use alpha_use_struct_convention.
(FRAME_CHAIN): Remove unnecessary cast.
* linespec.h: New file. Declarations for linespec.c.
* linespec.c, alpha-tdep.c, breakpoint.c, parse.c, source.c,
symtab.c, tracepoint.c: Include the above.
* completer.c: New file. Line completion stuff for GDB.
(get_gdb_completer_word_break_characters,
get_gdb_completer_quote_characters): New functions. Accessors for
useful completer internal data.
(filename_completer, line_completion_function, skip_quoted): Moved
here from top.c.
* completer.h: New file. Declarations for the above.
* linespec.c (decode_line_1): Use
get_gdb_completer_word_break_characters and
get_gdb_completer_quote_characters.
* top.c: Include completer.h.
(filename_completer, line_completion_function, skip_quoted):
Moved to completer.c.
* corefile.c, exec.c, source.c, symfile.c, linespec.c: Include
completer.h.
* Makefile.in (SFILES): Add completer.c.
(COMMON_OBS): Add completer.o.
(completer.o): New target.
(linespec.o, alpha-tdep.o, breakpoint.o, parse.o, source.o,
symtab.o, tracepoint.o): Add linespec.h to dependencies list.
(corefile.o, exec.o, source.o, symfile.o, linespec.o): Add completer.h
to dependencies list.
Add two pointers (saved_regs, extra_info) to struct frame_info.
Introduce new macro FRAME_INIT_SAVED_REGS which replaces
FRAME_FIND_SAVED_REGS.
Document.
Use in mn10300 and rs6000 targets. Fix side effects on ALPHA, MIPS,
Z8K and SPARC targets.
* defs.h: Move _initialize_printcmd, _initialize_stack,
_initialize_blockframe out of here and in to their respective .c files.
* blockframe.c: Move _initialize_blockframe prototype to here.
* printcmd.c: Move _initialize_printcmd prototype to here.
* stack.c: Move _initialize_stack prototype to here.
* source.c, symtab.h: Move _initialize_source prototype to the .c file.
* values.c, value.h: Move _initialize_values prototype to the .c file.
* gdbthread.h, thread.c: Move _initialize_thread prototype to the .c
file.
* breakpoint.c, breakpoint.h: Move _initialize_breakpoint prototype
to the .c file.
* abug-rom.c alpha-nat.c alpha-tdep.c annotate.c ax-gdb.c bcache.c:
Standardize comments for the prototype section of these files.
* configure.in: Look in libc for wctype before looking for it in libc.
The last one is to fix the GNU ld (~2.9.1) + Solaris 2.6 interaction problem
where an empty stub library (libw) causes a core dump when we call vasprintf
(e.g. `info br') in the final linked gdb.
if we encounter a positive stack adjustment.
(find_proc_desc): If heuristic_fence_post is non-zero, use
heuristic_proc_start to determine the start of a function before
calling heuristic_proc_desc.
* coffread.c (coff_symtab_read): Change minimal symbol types
for C_LABEL symbols from mst_* to mst_file_*.
* config/m68k/sun3os4.mh (MMALLOC_CFLAGS): Define MMCHECK_FORCE to 1.
* configure.in: Handle error message from sun3 native ld when
configuring HLDFLAGS.
* configure: Regenerated with autoconf.
* c-valprint.c (c_value_print): Adjust value address by VALUE_OFFSET.
* cp-valprint.c (cp_print_value): Prevent gdb crashes by making sure
that the virtual base pointer from an user object still points to
accessible memory.
* dbxread.c (dbx_symfile_init): Initialize sym_stab_info to
clear the recently added header_files fields.
(dbx_symfile_finish): Free hfiles[i].vector to avoid storage leak.
* NEWS: Add Alpha Linux as a new native configuration.
* mdebugread.c (parse_symbol): When we find a malloc() symbol with
return type VOID, assume no debugging info is available for that
object file and patch the return value into VOID *. Otherwise,
operations requiring an implicit call to malloc() will fail.
* infrun.c (wait_for_inferior): The criterion to detect entering a
sigtramp handler is now: (a) the current pc is inside a sigtramp
handler, (b) the previous pc is not in a sigtramp handler, and (c)
the current stack pointer is "inner" than the old one. Condition
(c) is new to avoid mistaking a return from a signal handler into
sigtramp as a new sigtramp invocation.
* dcache.c (struct dcache_block): Declare addr as CORE_ADDR. An
int may not be big enough to hold an address.
(dcache_hit): Ditto.
(dcache_peek_byte): Fix indentation.
* configure.in (alpha-*-linux*): Add target.
* configure: Rebuild
* config/alpha/tm-alpha.h (PROC_DESC_IS_DYN_SIGTRAMP): New macro.
(SET_PROC_DESC_IS_DYN_SIGTRAMP): Ditto.
(DYNAMIC_SIGTRAMP_OFFSET): Ditto.
(SIGCONTEXT_ADDR): Ditto.
(FRAME_PAST_SIGTRAMP_FRAME): Ditto.
* config/alpha/alpha-linux.mh: New file.
* config/alpha/alpha-linux.mt: Ditto.
* config/alpha/nm-linux.h: Ditto.
* config/alpha/tm-alphalinux.h: Ditto.
* config/alpha/xm-alphalinux.h: Ditto.
* config/alpha/xm-alphaosf.h: Renamed from xm-alpha.h.
* config/alpha/alpha-osf1.mh (XM_FILE): Change from xm-alpha.h to
xm-alphaosf.h.
* config/alpha/alpha-osf2.mh: Ditto.
* blockframe.c (find_pc_partial_function): Pass PC to
SIGTRAMP_START and SIGTRAMP_END macros for the benefit of systems
that detect sigtramp code via designated code sequences (as is the
case for Linux/Alpha, for example).
* config/i386/tm-i386bsd.h: Change SIGTRAMP_START and SIGTRAMP_END
to ignore new PC argument.
* config/m68k/tm-hp300bsd.h: Ditto.
* config/vax/tm-vax.h: Ditto.
* alpha-tdep.c (alpha_linux_sigtramp_offset): New function.
(alpha_osf_skip_sigtramp_frame): Ditto.
(push_sigtramp_desc): Ditto.
(alpha_find_saved_regs): Use SIGCONTEXT_ADDR macro to extract
sigcontext address from frame.
(alpha_saved_pc_after_call): When in sigtramp, use
alpha_frame_saved_pc() instead of read-register().
(after_prologue): When inside a dynamically generated sigtramp
function, there is no prologue, so return address of first
instruction.
(alpha_in_prologue): Fix typo in comment.
(find_proc_desc): Use macro DYNAMIC_SIGTRAMP_OFFSET to determine
whether we're inside a dynamicaly generated sigtramp function. If
so, create and push and appropriate procedure descriptor.
(alpha_frame_chain): Use macro FRAME_PAST_SIGTRAMP_FRAME to obtain
the frame past a sigtramp frame (if the current frame is indeed a
sigtramp function).
(init_extra_frame_info): Don't read next frame register off of
stack-pointer when inside a dynamiccaly generated sigtramp.
(alpha_pop_frame): Also unlink and destroy procedure descriptors
created for dynamically generated sigtramp functions.
* alpha-nat.c: When compiling under Linux, include <asm/reg.h> and
<alpha/ptrace.h> instead of <machine/reg.h>
* regex.c: Renamed to gnu-regex.c.
* Makefile.in (POSSLIBS): Refer to gnu-regex.h and gnu-regex.c.
(REGEX, REGEX1): Change to gnu-regex.o instead of regex.o.
(regex.o): Renamed to gnu-regex.o; refer to gnu-regex.c.
(irix5-nat.o, osfsolib.o, gnu-regex.o, solib.o, source.o, symtab.o):
Likewise.
* irix5-nat.c, osfsolib.c, gnu-regex.c, solib.c, source.c, symtab.c):
Include "gnu-regex.h" instead of "regex.h".
* alpha-tdep.c (in_prologue): Rename to alpha_in_prologue, to
avoid conflicts with symtab.h.
fixes building gdb under OSF/1 4.0
Do not set saved registers from heuristics for a sigtramp frame.
* dwarfread.c (enum_type): Determine signedness of enum type
from enumerators.
* mips-tdep.c: Include gdb_string.h, gcc -Wall lint.
* rs6000-nat.c (xcoff_relocate_core): Fix typo.
* valops.c (value_repeat): Fix length of memory transfer to
match recent allocate_repeat_value change.
(SKIP_TRAMPOLINE_CODE): Define.
* alpha-tdep.c (alpha_frame_saved_pc): Use pc_reg field from
frame to find the saved pc register.
(alpha_saved_pc_after_call): Skip over shared library trampoline
before trying to find the saved pc register.
(find_proc_desc): Copy PROC_PC_REG from found proc_desc
to heuristic proc_desc.
(init_extra_frame_info): Initialize pc_reg field in frame.
values whose length is less than the register size for big endian
targets.
* alpha-tdep.c (alpha_extract_return_value,
alpha_store_return_value): Use alpha_convert_register_to_*
to handle functions returning "float" correctly.
read_next_frame_reg to alpha_find_saved_regs, handle saved
floating point registers.
* mips-tdep.c: Move sigtramp handling of saved registers from
read_next_frame_reg to mips_find_saved_regs, handle saved
floating point registers.
* config/mips/tm-irix3.h, config/mips/tm-irix5.h,
config/mips/tm-mipsv4.h (SIGFRAME_FPREGSAVE_OFF): Define.
* sparc-tdep.c (sparc_pc_adjust): Fix check for `unimp'
instruction to handle functions returning structures with
large sizes properly.
* alpha-tdep.c (alpha_push_arguments): Fix typo (TYPE_VALUE ->
VALUE_TYPE). Do the cast for TYPE_CODE_BOOL, TYPE_CODE_CHAR,
TYPE_CODE_ENUM, and TYPE_CODE_RANGE as well as TYPE_CODE_INT.
Sat Apr 15 14:04:32 1995 Per Bothner <bothner@cygnus.com>
* alpha-tdep.c (alpha_push_arguments): Only cast to long for
TYPE_CODE_INT.
that contains a static instance of the class.
* cp-valprint.c (dont_print_vb_obstack): Renamed from
dont_print_obstack, made static.
(dont_print_statmem_obstack): New obstack, controls printing
of static member classes.
(_initialize_cp_valprint): Initialize it.
(cp_print_static_field): New function, handles printing of
static members.
(cp_print_value_fields): New parameter dont_print_statmem to
handle recursive printing of static member classes, use
cp_print_static_field to handle printing of static members.
* c-valprint.c (cp_print_value_fields): Update prototype and
call to include additional dont_print_statmem parameter.
* c-valprint.c, f-valprint.c (dont_print_obstack): Remove unused
extern declaration.
* alpha-tdep.c, findvar.c, infptrace.c: Include <string.h>.
* config/alpha/tm-alpha.h (FRAME_FIND_SAVED_REGS): Call
alpha_find_saved_regs if fi->saved_regs is still NULL.
* elfread.c (elf_symtab_read): Ensure that the filename field
of a minsym is nonempty. Ignore solib trampoline symbols from
the main symbol table, they might have a bogus value.
* procfs.c (set_proc_siginfo), config/alpha/alpha-osf2.mh:
Fix typos in comments.
