* arch-utils.h (generic_in_function_epilogue_p): Declare extern.
* breakpoint.c (watchpoint_check): Add test whether the pc is
currently in the epilogue of a function.
* gdbarch.c: Autogenerated from gdbarch.sh.
* gdbarch.h: Ditto.
* gdbarch.sh (function_list): Add `in_function_epilogue_p' definition.
longer disagree on how big pointers are.
* findvar.c (value_from_register): Remove special case code for D10V.
* printcmd.c (print_frame_args): Same.
* valops.c (value_at, value_fetch_lazy): Same.
* values.c (unpack_long): Same.
* gdbarch.sh: Changes to effect the following:
* gdbarch.h (GDB_TARGET_IS_D10V, D10V_MAKE_DADDR,
gdbarch_d10v_make_daddr_ftype, gdbarch_d10v_make_daddr,
set_gdbarch_d10v_make_daddr, D10V_MAKE_IADDR,
gdbarch_d10v_make_iaddr_ftype, gdbarch_d10v_make_iaddr,
set_gdbarch_d10v_make_iaddr, D10V_DADDR_P,
gdbarch_d10v_daddr_p_ftype, gdbarch_d10v_daddr_p,
set_gdbarch_d10v_daddr_p, D10V_IADDR_P,
gdbarch_d10v_iaddr_p_ftype, gdbarch_d10v_iaddr_p,
set_gdbarch_d10v_iaddr_p, D10V_CONVERT_DADDR_TO_RAW,
gdbarch_d10v_convert_daddr_to_raw_ftype,
gdbarch_d10v_convert_daddr_to_raw,
set_gdbarch_d10v_convert_daddr_to_raw, D10V_CONVERT_IADDR_TO_RAW,
gdbarch_d10v_convert_iaddr_to_raw_ftype,
gdbarch_d10v_convert_iaddr_to_raw,
set_gdbarch_d10v_convert_iaddr_to_raw): Delete declarations.
* gdbarch.c: Delete the corresponding definitions.
(struct gdbarch): Delete members d10v_make_daddr,
d10v_make_iaddr, d10v_daddr_p, d10v_iaddr_p,
d10v_convert_daddr_to_raw, and d10v_convert_iaddr_to_raw.
(startup_gdbarch): Remove initializers for the above.
(verify_gdbarch, gdbarch_dump): Don't verify or dump them any
more.
* d10v-tdep.c (d10v_register_virtual_type): Rather that
claiming the stack pointer and PC are 32 bits long (which they
aren't), say that the stack pointer is an int16_t, and the
program counter is a function pointer. This allows the rest
of GDB to make the appropriate conversions between the code
pointer format and real addresses.
(d10v_register_convertible, d10v_register_convert_to_virtual,
d10v_register_convert_to_raw): Delete function; no registers
are convertible now, so we use
generic_register_convertible_not instead.
(d10v_address_to_pointer, d10v_pointer_to_address): New gdbarch
methods.
(d10v_push_arguments, d10v_extract_return_value): Remove special
cases for code and data pointers.
(d10v_gdbarch_init): Set gdbarch_ptr_bit to 16, so that GDB and
the target agree on how large pointers are. Say that addresses
are 32 bits long. Register the address_to_pointer and
pointer_to_address conversion functions. Since no registers are
convertible now, register generic_register_convertible_not as the
gdbarch_register_convertible method instead of
d10v_register_convertible. Remove registrations for
d10v_register_convert_to_virtual,
d10v_register_convert_to_raw, gdbarch_d10v_make_daddr,
gdbarch_d10v_make_iaddr, gdbarch_d10v_daddr_p,
gdbarch_d10v_iaddr_p, gdbarch_d10v_convert_daddr_to_raw, and
gdbarch_d10v_convert_iaddr_to_raw.
definitions. Generate an error when both pure multi-arch and
"tm.h".
* gdbarch.h, gdbarch.c: Regenerate.
* defs.h (GDB_MULTI_ARCH_TM): Rewrite definition.
(EXTRACT_STRUCT_VALUE_ADDRESS): Change to a function with
predicate.
* gdbarch.h, gdbarch.c: Regenerate.
* values.c (value_being_returned): Change the reference to
EXTRACT_STRUCT_VALUE_ADDRESS_P to a function call.
than requiring that all per-architecture data be registered before
the first gdbarch object is allocated.
* gdbarch.sh: Changes to effect the following:
* gdbarch.c (alloc_gdbarch_data, init_gdbarch_data): Delete
declarations and definitions.
(check_gdbarch_data): New function, and declaration.
(gdbarch_alloc): Don't call alloc_gdbarch_data; leaving the fields
zero is good enough.
(free_gdbarch_data): Tolerate a null data pointer. Free only
those data items gdbarch->data actually has allocated.
(set_gdbarch_data, gdbarch_data): Call check_gdbarch_data.
(gdbarch_update_p): No need to call init_gdbarch_data.
* arch-utils.c (default_prepare_to_proceed)
(generic_prepare_to_proceed): Added new functions.
* arch-utils.h: New function declarations for
default_prepare_to_proceed() and generic_prepare_to_proceed().
* gdbarch.sh: Added PREPARE_TO_PROCEED.
* gdbarch.c: Regenerated.
* gdbarch.h: Regenerated.
* inferior.h: Added get_last_target_status() declaration.
* infrun.c (get_last_target_status): Added new function.
(handle_inferior_event): Saves last pid and waitstatus, which will
get returned by get_last_target_status().
* hppa-tdep.c (prepare_to_proceed): Added comment stating that
prepare_to_proceed() is potentially redundant since
default_prepare_to_proceed() has been added.
* linux-thread.c (prepare_to_proceed): Ditto.
* lin-lwp.c (prepare_to_proceed): Ditto.
* m3-nat.c (prepare_to_proceed): Ditto.
set_gdbarch_from_file): Fix spelling error.
* v850-tdep.c (v850_target_architecture_hook): Likewise.
* gdbarch.sh: Fix spelling errors in comment.
* gdbarch.c, gdbarch.h: Regenerate.
* ppcnbsd-nat.c (fetch_core_registers, fetch_inferior_registers,
store_inferior_registers): Support older NetBSD/powerpc systems
from before fp reg support was added. Adapt to register number
changes caused when powerpc target was multi-arched.
* symtab.c (search_symbols): Fix off by one error in index for
initializing variables ourtype, ourtype2, ourtype3, and ourtype4.
(symtab_symbol_info): fix similar off by one error.
Fri Aug 25 12:03:15 2000 David Taylor <taylor@texas.cygnus.com>
* gdbarch.sh (TARGET_ADDR_BIT): New macro for the number
of bits in gdb's representation of a target address.
* gdbarch.c, gdbarch.h: Regenerated.
* gdbtypes.c (build_gdbtypes): Use TARGET_ADDR_BIT instead of
TARGET_PTR_BIT when initializing builtin_type_CORE_ADDR.
* printcmd.c (print_address_numeric): Use TARGET_ADDR_BIT instead
of TARGET_PTR_BIT, because we're printing an address, not a pointer.
arch-utils.{h,c}. The ``set architecutre'' and ``set endian''
commands (part of the move) were implemented to use add_set_enum_cmd()
so that ``set architecture <tab>'' works.
* gdbarch.sh: Add FP0_REGNUM to list of multi-arched register numbers.
* gdbarch.c, gdbarch.h: Regenerate.
* core-regset.c: Change FP0_REGNUM to a runtime test.
* procfs.c: Ditto.
* sun3-nat.c: Ditto.
* sparc-tdep.c: Ditto.
* i386mach-nat.c: Remove unnecessary ifdef for FP0_REGNUM.
* ptx4-nat.c: Ditto.
* sol-thread.c (sol_thread_create_inferior): only add the thread
to the thread list if it is not already in there.
(prototypes for thread_db func ptrs): pretty up formatting.
run-time test for STACK_ALIGN_P.
* gdbarch.sh: Add support for function and variable predicates.
(STACK_ALIGN): Add. Implement with predicate - STACK_ALIGN_P.
* gdbarch.h, gdbarch.c: Re-generate.
* gdbarch.sh (IEEE_FLOAT): New entry.
* gdbarch.c, gdbarch.h: Regenerated.
* valprint.c (IEEE_FLOAT): Provide a default #definition for this.
(print_floating): Use IEEE_FLOAT as if it were an expression; use
the code specific to IEEE-format numbers whenever the value of
IEEE_FLOAT is non-zero.
* config/a29k/tm-a29k.h, config/alpha/tm-alpha.h,
config/arc/tm-arc.h, config/arm/tm-arm.h, config/fr30/tm-fr30.h,
config/h8300/tm-h8300.h, config/i386/tm-i386.h,
config/i960/tm-i960.h, config/m88k/tm-m88k.h,
config/mips/tm-mips.h, config/pa/tm-hppa.h,
config/sparc/tm-sparc.h, config/delta/tm-delta.h,
config/frv/tm-frv.h (IEEE_FLOAT): For all ports that #define
IEEE_FLOAT, make sure they give it the value (1).
functions which architectures can redefine, defaulting to
generic_pointer_to_address and generic_address_to_pointer.
* findvar.c (extract_typed_address, store_typed_address,
generic_pointer_to_address, generic_address_to_pointer): New
functions.
(POINTER_TO_ADDRESS, ADDRESS_TO_POINTER): Provide default
definitions.
(extract_address, store_address): Doc fixes.
* values.c (value_as_pointer): Doc fix.
(value_from_pointer): New function.
* defs.h (extract_typed_address, store_typed_address): New
declarations.
* inferior.h (generic_address_to_pointer,
generic_pointer_to_address): New declarations.
* value.h (value_from_pointer): New declaration.
* ax-gdb.c (const_var_ref): Use value_from_pointer, not
value_from_longest.
* blockframe.c (generic_push_dummy_frame): Use read_pc and
read_sp, not read_register.
* c-valprint.c (c_val_print): Use extract_typed_address instead of
extract_address to extract vtable entries and references.
* cp-valprint.c (cp_print_value_fields): Use value_from_pointer
instead of value_from_longest to extract the vtable's address.
* eval.c (evaluate_subexp_standard): Use value_from_pointer
instead of value_from_longest to compute `this', and for doing
pointer-to-member dereferencing.
* findvar.c (read_register): Use extract_unsigned_integer, not
extract_address.
(read_var_value): Use store_typed_address instead of store_address
for building label values.
(locate_var_value): Use value_from_pointer instead of
value_from_longest.
* hppa-tdep.c (find_stub_with_shl_get): Use value_from_pointer,
instead of value_from_longest, to build arguments to __d_shl_get.
* printcmd.c (set_next_address): Use value_from_pointer, not
value_from_longest.
(x_command): Use value_from_pointer, not value_from_longest.
* tracepoint.c (set_traceframe_context): Use value_from_pointer,
not value_from_longest.
* valarith.c (value_add, value_sub): Use value_from_pointer, not
value_from_longest.
* valops.c (find_function_in_inferior, value_coerce_array,
value_coerce_function, value_addr, hand_function_call): Same.
* value.h (COERCE_REF): Use unpack_pointer, not unpack_long.
* values.c (unpack_long): Use extract_typed_address to produce
addresses from pointers and references, not extract_address.
(value_from_longest): Use store_typed_address instead of
store_address to produce pointer and reference values.
documented.
Bring COERCE_FLOAT_TO_DOUBLE under gdbarch's control.
* valops.c (COERCE_FLOAT_TO_DOUBLE): Rework definition to be
more function-like.
(default_coerce_float_to_double, standard_coerce_float_to_double):
New functions.
(value_arg_coerce): Adjust for new definition.
* value.h (default_coerce_float_to_double,
standard_coerce_float_to_double): New declarations for the above.
* gdbarch.sh (coerce_float_to_double): New entry, replacing macro.
* gdbarch.c, gdbarch.h: Regenerated.
* tm-alpha.h, tm-fr30.h, tm-m32r.h, tm-mips.h, tm-hppa.h,
tm-rs6000.h, tm-sh.h, tm-sparc.h (COERCE_FLOAT_TO_DOUBLE): Change
definitions.
* mips-tdep.c (mips_coerce_float_to_double): Supply our own custom
function here.
(mips_gdbarch_init): Install that as our coerce_float_to_double
function.
