* elf64-ppc.c: Define more insns used in plt call stubs.
(ppc64_elf_brtaken_reloc): Assume isa version 2 or above.
(ppc64_elf_relocate_section): Likewise.
(enum ppc_stub_type): Add ppc_stub_plt_call_r2save.
(struct ppc_link_hash_table): Increase size of stub_count array.
Add plt_stub_align and plt_thread_safe.
(ALWAYS_USE_FAKE_DEP, ALWAYS_EMIT_R2SAVE): Define.
(plt_stub_size, plt_stub_pad): New functions.
(build_plt_stub): Emit barriers for power7 thread safety. Don't
emit needless save of r2.
(build_tls_get_addr_stub): Adjust params.
(ppc_build_one_stub): Handle ppc_stub_plt_call_r2save and aligning
plt stubs. Adjust build_*plt_stub calls.
(ppc_size_one_stub): Similarly.
(ppc64_elf_size_stubs): Accept plt_thread_safe and plt_stub_align
params. Choose default for plt_thread_safe based on existence of
calls to thread creation functions. Modify plt_call to
plt_call_r2save when no tocsave reloc found. Align tail of stub
sections.
(ppc64_elf_build_stubs): Align tail of stub sections. Adjust
output of stub statistics.
(ppc64_elf_relocate_section): Handle ppc_stub_plt_call_r2save.
* elf64-ppc.h (ppc64_elf_size_stubs): Update prototype.
ld/
* emultempl/ppc64elf.em (PARSE_AND_LIST_PROLOGUE,
PARSE_AND_LIST_LONGOPTS, PARSE_AND_LIST_OPTIONS,
PARSE_AND_LIST_ARGS_CASES): Handle --{no-,}plt-thread-safe and
--{no-,}plt-align.
(plt_thread_safe, plt_stub_align): New vars.
(gld${EMULATION_NAME}_after_allocation): Pass them to
ppc64_elf_size_stubs. Align stub sections according to plt_stub_align.
* ld.texinfo: Document new command line options, and an old
undocumented option.
Fix zero registers core files when built by gcc-4.7.
* elf64-x86-64.c (elf_x86_64_write_core_note): Remove variables p and
size. Call elfcore_write_note for the local variables. Remove the
final elfcore_write_note call. Add NOTREACHED comments.
* dwarf2.c (_bfd_dwarf2_slurp_debug_info): Factor out the part
which reads DWARF2 and stores in stash from find_line.
(find_line) Call _bfd_dwarf2_slurp_debug_info.
* libbfd-in.h (_bfd_dwarf2_slurp_debug_info): Add declaration.
* libbfd.h (_bfd_dwarf2_slurp_debug_info): Regenerate.
* mach-o.c (dsym_subdir): The name of subdir where debug
information may be stored.
(bfd_mach_o_lookup_uuid_command): New. Lookup a load command whose
type is UUID.
(bfd_mach_o_dsym_for_uuid_p): New. Check if the specified BFD is
corresponding to the executable.
(bfd_mach_o_find_dsym): New. Find a debug information BFD in the
specified binary file.
(bfd_mach_o_follow_dsym): New. Find a debug information BFD for
the original BFD.
(bfd_mach_o_find_nearest_line): Check dSYM files for Mach-O
executables, dylibs, and bundles.
(bfd_mach_o_close_and_cleanup): Clean up BFDs for the dSYM file.
* mach-o.h (dsym_bfd): The BFD of the dSYM file.
bfd:
* mach-o.c (bfd_mach_o_mangle_symbols): Put in the section index
for stabd symbols.
(bfd_mach_o_primary_symbol_sort_key): Adjust for stabs.
(bfd_mach_o_cf_symbols): Likewise.
gas:
* config/obj-macho.c (obj_macho_process_stab): New.
* config/obj-macho.h (OBJ_PROCESS_STAB): Define.
(obj_macho_process_stab): Declare.
bfd:
* mach-o.c (bfd_mach_o_write_symtab): Fill in the string table index
as the value of an indirect symbol. Keep the string table index in
non-indirect syms for reference.
(bfd_mach_o_write_dysymtab): New.
(bfd_mach_o_primary_symbol_sort_key): New.
(bfd_mach_o_cf_symbols): New.
(bfd_mach_o_sort_symbol_table): New.
(bfd_mach_o_mangle_symbols): Return early if no symbols. Sort symbols.
If we are emitting a dysymtab, process indirect symbols and count the
number of each other kind.
(bfd_mach_o_mangle_sections): New.
(bfd_mach_o_write_contents): Split out some pre-requisite code into
the command builder. Write dysymtab if the command is present.
(bfd_mach_o_count_sections_for_seg): New.
(bfd_mach_o_build_seg_command): New.
(bfd_mach_o_build_dysymtab_command): New.
(bfd_mach_o_build_commands): Reorganize to support the fact that some
commands are optional and should not be emitted if there are no
sections or symbols.
(bfd_mach_o_set_section_contents): Amend comment.
* mach-o.h: Amend and add to comments.
(mach_o_data_struct): Add fields for dysymtab symbols counts and a
pointer to the indirects, when present.
(bfd_mach_o_should_emit_dysymtab): New macro.
(IS_MACHO_INDIRECT): Likewise.
gas/testsuite:
* gas/mach-o/dysymtab-1-64.d: New.
* gas/mach-o/dysymtab-1.d: New.
* gas/mach-o/symbols-1-64.d: New.
* gas/mach-o/symbols-1.d: New.
* gas/mach-o/symbols-base-64.s: New.
* gas/mach-o/symbols-base.s: New.
* elf32-rl78.c (rl78_elf_howto_table): Add R_RL78_RH_RELAX.
(rl78_reloc_map): Add BFD_RELOC_RL78_RELAX.
(rl78_elf_relocate_section): Add R_RL78_RH_RELAX, R_RL78_RH_SFR,
and R_RL78_RH_SADDR.
(rl78_elf_finish_dynamic_sections): Only validate PLT section if
we didn't relax anything, as relaxing might remove a PLT reference
after we've set up the table.
(elf32_rl78_relax_delete_bytes): New.
(reloc_bubblesort): New.
(rl78_offset_for_reloc): New.
(relax_addr16): New.
(rl78_elf_relax_section): Add support for relaxing long
instructions into short ones.
[gas]
* config/rl78-defs.h (rl78_linkrelax_addr16): Add.
(rl78_linkrelax_dsp, rl78_linkrelax_imm): Remove.
* config/rl78-parse.y: Tag all addr16 and branch patterns with
relaxation markers.
* config/tc-rl78.c (rl78_linkrelax_addr16): New.
(rl78_linkrelax_branch): New.
(OPTION_RELAX): New.
(md_longopts): Add relax option.
(md_parse_option): Add OPTION_RELAX.
(rl78_frag_init): Support relaxation.
(rl78_handle_align): New.
(md_assemble): Support relaxation.
(md_apply_fix): Likewise.
(md_convert_frag): Likewise.
* config/tc-rl78.h (MAX_MEM_FOR_RS_ALIGN_CODE): New.
(HANDLE_ALIGN): New.
(rl78_handle_align): Declare.
* config/rl78-parse.y (rl78_bit_insn): New. Set it for all bit
insn patterns.
(find_bit_index): New. Strip .BIT suffix off relevent
expressions for bit insns.
(rl78_lex): Exclude bit suffixes from expression parsing.
[include/elf]
* rl78.h (R_RL78_RH_RELAX, R_RL78_RH_SFR, R_RL78_RH_SADDR): New.
(RL78_RELAXA_BRA, RL78_RELAXA_ADDR16: New.
* elf32-s390.c (elf_s390_relocate_section): Add check for debugging
section in LD to LE linker relaxation for R_390_TLS_LDO32.
* elf64-s390.c (elf_s390_relocate_section): Likewise for
R_390_TLS_LDO64.
* mach-o-i386.c (bfd_mach_o_section_type_valid_for_tgt): Define NULL.
* mach-o-target.c (bfd_mach_o_backend_data): Initialize bfd_mach_o_section_type_valid_for_tgt
* mach-o-x86-64.c (bfd_mach_o_section_type_valid_for_x86_64): New.
(bfd_mach_o_section_type_valid_for_tgt): Set to bfd_mach_o_section_type_valid_for_x86_64.
* mach-o.c (bfd_mach_o_section_type_name): Reorder and eliminate dup.
(bfd_mach_o_section_attribute_name): Reorder.
(bfd_mach_o_get_section_type_from_name): If the target has defined a validator for section
types, then use it.
* mach-o.h (bfd_mach_o_get_section_type_from_name): Alter declaration to include the bfd.
gas:
* config/obj-macho.c (obj_mach_o_section): Account for target-dependent section
types. Improve error handling when wrong section types/attributes are specified.
gas/testsuite:
* gas/mach-o/err-sections-1.s: New.
* gas/mach-o/err-sections-2.s: New.
* gas/mach-o/sections-3.d: New.
* gas/mach-o/sections-3.s: New.
