(M, Mp): Use OP_M.
(None, PADLOCK_SPECIAL, PADLOCK_0): Delete.
(GRPPADLCK): Define.
(dis386): Use NOP_Fixup on "nop".
(dis386_twobyte): Use GRPPADLCK on opcode 0xa7.
(twobyte_has_modrm): Set for 0xa7.
(padlock_table): Delete. Move to..
(grps): ..here, using OP_0f07. Use OP_Ofae on lfence, mfence
and clflush.
(print_insn): Revert PADLOCK_SPECIAL code.
(OP_E): Delete sfence, lfence, mfence checks.
* gas/i386/katmai.d: Revert last change.
(INVLPG_Fixup): New function.
(PNI_Fixup): Remove ATTRIBUTE_UNUSED from sizeflag.
* opcode/i386.h (i386_optab): Remove CpuNo64 from sysenter and
sysexit.
* i386-dis.c (grps): Use clflush by default for 0x0fae/7.
(OP_E): Twiddle clflush to sfence here.
gas/testsuite/
* gas/i386/katmai.d: Adjust for clflush change.
2003-06-23 H.J. Lu <hongjiu.lu@intel.com>
* gas/config/tc-i386.c (md_assemble): Support Intel Precott New
Instructions.
* gas/config/tc-i386.h (CpuPNI): New.
(CpuUnknownFlags): Add CpuPNI.
gas/testsuite/
2003-06-23 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/i386.exp: Add prescott.
* gas/i386/prescott.d: New file.
* gas/i386/prescott.s: Likewise.
include/opcode/
2003-06-23 H.J. Lu <hongjiu.lu@intel.com>
* i386.h (i386_optab): Support Intel Precott New Instructions.
opcodes/
2003-06-23 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (PNI_Fixup): New. Fix up "mwait" and "monitor" in
Intel Precott New Instructions.
(PREGRP27): New. Added for "addsubpd" and "addsubps".
(PREGRP28): New. Added for "haddpd" and "haddps".
(PREGRP29): New. Added for "hsubpd" and "hsubps".
(PREGRP30): New. Added for "movsldup" and "movddup".
(PREGRP31): New. Added for "movshdup" and "movhpd".
(PREGRP32): New. Added for "lddqu".
(dis386_twobyte): Use PREGRP30 to replace the "movlpX" entry.
Use PREGRP31 to replace the "movhpX" entry. Use PREGRP28 for
entry 0x7c. Use PREGRP29 for entry 0x7d. Use PREGRP27 for
entry 0xd0. Use PREGRP32 for entry 0xf0.
(twobyte_has_modrm): Updated.
(twobyte_uses_SSE_prefix): Likewise.
(grps): Use PNI_Fixup in the "sidtQ" entry.
(prefix_user_table): Add PREGRP27, PREGRP28, PREGRP29, PREGRP30,
PREGRP31 and PREGRP32.
(float_mem): Use "fisttp{l||l|}" in entry 1 in opcode 0xdb.
Use "fisttpll" in entry 1 in opcode 0xdd.
Use "fisttp" in entry 1 in opcode 0xdf.
* arc.h (arc_ext_opcodes): Declare as extern.
(arc_ext_operands): Declare as extern.
* i860.h (i860_opcodes): Declare as const.
2002-11-18 Klee Dienes <kdienes@apple.com>
* arc-opc.c (arc_ext_opcodes): Define.
(arc_ext_operands): Define.
* i386-dis.c (Suffix3DNow): Declare as const.
* arm-opc.h (arm_opcodes): Declare as const.
(thumb_opcodes): Declare as const.
* h8500-opc.h (h8500_table): Declare as const.
(h8500_table): Use a NULL for the opcode in the terminator, so
that code testing (opcode->name) behaves correctly.
* mcore-opc.h (mcore_table): Declare as const.
* sh-opc.h (sh_table): Declare as const.
* w65-opc.h (optable): Declare as const.
* z8k-opc.h (z8k_table): Declare as const.
* doc/binutils.texi (objdump): Document x86 -M options.
include/ChangeLog
* dis-asm.h (print_insn_i386): Declare.
opcodes/ChangeLog
* disassemble.c (disassembler): Call print_insn_i386.
* i386-dis.c (SUFFIX_ALWAYS): Define.
(struct dis_private): Add orig_sizeflag.
(print_insn_i386): Make it a wrapper, calling..
(print_insn): ..The old body of print_insn_i386. Avoid longjmp
warning without using volatile by moving orig_sizeflag to priv,
and removing inbuf. Parse disassembler_options.
(print_insn_i386_att, print_insn_i386_intel): Move initialisation
code to print_insn.
(putop): Remove #ifdef SUFFIX_ALWAYS.
accept WordReg.
* i386-dis.c (grps): Change "sldt", "str", and "smsw" entries
to "sldtQ", "strQ", "smswQ" respectively; all with Ev operand
category instead of Ew.
* i386-dis.c (set_op): Handle 64 bit and 32 bit mode.
(OP_J): Use bfd_vma for mask to work properly with 64 bits.
(op_address,op_riprel): Use bfd_vma to handle 64 bits.
(cond_jump_mode, loop_jcxz_mode): Define.
(dis386_att): Add cond_jump_flag and loop_jcxz_flag as
appropriate, and 'F' suffix to loop insns.
(disx86_64_att): Likewise.
(dis386_twobyte_att): Likewise.
(print_insn_i386): Don't output addr prefix for loop, jcxz insns.
Output data size prefix for long conditional jumps. Output cs and
ds branch hints.
(putop): Handle 'F', and mark PREFIX_ADDR used for case 'E'.
(OP_J): Don't make PREFIX_DATA used.
(need_modrm): Give it file scope.
(MODRM_CHECK): Define.
(dofloat): Use MODRM_CHECK.
(OP_E): Likewise.
(OP_EM): Likewise.
(OP_EX): Likewise.
and fix testsuite yet again now that we are getting correct disassembly.
(dis386_twobyt): Add SSE2 instructions.
(twobyte_uses_SSE_prefix: Rename from ... ; add new SSE instructions.
(twobyte_uses_f3_prefix): ... this one.
(grps): Add SSE instructions.
(prefix_user_table): Add two new slots; add SSE2 instructions.
(print_insn_i386): Rename uses_f3_prefix to uses_SSE_prefix;
Handle the REPNZ and Data16 prefixes as well; do proper lookup
to prefix_user_table.
(OP_E): Accept mfence and lfence as well.
(OP_MMX): Data16 prefix turns MMX to SSE; support REX extensions.
(OP_XMM): Support REX extensions.
(OP_EM): Likewise.
(OP_EX): Likewise.
(rex): New static variable.
(REX_MODE64, REX_EXTX, REX_EXTY, REX_EXTZ): New constants.
(USED_REX): New macro.
(Ev, Ed, Rm, Iq, Iv64, Cm, Dm, Rm*, Ob64, Ov64): New macros.
(OP_I64, OP_OFF64, OP_IMREG): New functions.
(OP_REG, OP_OFF): Declare.
(get64, get32, get32s): New functions.
(r??_reg): New constants.
(dis386_att): Change templates of instruction implicitly promoted
to 64bit; change e?? to RMe?? for unwind RM byte instructions.
(grps): Likewise.
(dis386_intel): Likewise.
(dixx86_64_att): New table based on dis386_att.
(dixx86_64_intel): New table based on dis386_intel.
(names64, names8rex): New global variable.
(names32, names16): Add extended registers.
(prefix_user_t): Recognize rex prefixes.
(prefix_name): Print REX prefixes nicely.
(op_riprel): New global variable.
(start_pc): Set type to bfd_vma.
(print_insn_i386): Detect the 64bit mode and use proper table;
move ckprefix after initializing the buffer; output unused rex prefixes;
output information about target of RIP relative addresses.
(putop): Support 'O' and 'I'. Update handling of "P', 'Q', 'R' and 'S';
(print_operand_value): New function.
(OP_E, OP_G, OP_REG, OP_I, OP_J, OP_DIR, OP_OFF, OP_D): Add support for
REX prefix and new modes.
(get64, get32s): New.
(get32): Return bfd_signed_vma type.
(set_op): Initialize the op_riprel.
* disassemble.c (disassembler): Recognize the x86-64 disassembly.
(generic_strcat_address): Add cast to avoid warning.
* i386-dis.c: Initialize all structure fields to avoid warnings.
Add ATTRIBUTE_UNUSED as appropriate.
* i386-dis.c (FWAIT_OPCODE): Define.
(used_prefixes): New static variable.
(fetch_data): Don't print an error message if we have already
fetched some bytes successfully.
(ckprefix): Clear used_prefixes. Use FWAIT_OPCODE, not 0x9b.
(prefix_name): New static function.
(print_insn_i386): If setjmp fails, indicating a data error, but
we have managed to fetch some bytes, print the first one as a
prefix or a .byte pseudo-op. If fwait is followed by a non
floating point instruction, print the first prefix. Set
used_prefixes when prefixes are used. If any prefixes were not
used after disassembling the instruction, print the first prefix
instead of printing the instruction.
(putop): Set used_prefixes when prefixes are used.
(append_seg, OP_E, OP_G, OP_REG, OP_I, OP_sI, OP_J): Likewise.
(OP_DIR, OP_SIMD_Suffix): Likewise.
(fetch_data): Don't print an error message if we have already
found an fwait prefix.
(ckprefix): Use FWAIT_OPCODE rather than 0x9b.
(print_insn_i386): If setjmp fails, indicating a data error, but
we have found an fwait prefix, then print it as an fwait
instruction. In any case, return the number of bytes consumed, if
any, rather than always returning -1.
Add missing files from last change in gas/testsuite.
i386-dis.c: Catch a number of cases where an invalid modrm would result in
bogus disassembly. const lots of places.
