PR bootstrap/25670
* Makefile.tpl ([+compare-target+]): Print explanation messages.
* Makefile.def (ADAFLAGS, BOOT_ADAFLAGS, LANGUAGES): New flags_to_pass.
* Makefile.tpl (BASE_FLAGS_TO_PASS): Support optional flags_to_pass.
(EXTRA_GCC_FLAGS): Remove ADAFLAGS, BOOT_ADAFLAGS, LANGUAGES,
BUILD_PREFIX, BUILD_PREFIX_1.
* configure.in: (BUILD_PREFIX, BUILD_PREFIX_1): Don't substitute.
* Makefile.def (bootstrap stage 1): Pass LIBCFLAGS too.
* Makefile.tpl (POSTSTAGE1_FLAGS_TO_PASS): Override LIBCFLAGS too.
* Makefile.tpl (configure-stage[+id+]-[+prefix+][+module+],
all-stage[+id+]-[+prefix+][+module+], : Use $(current_stage) instead
of `cat stage_current`. Always provide the `r' and `s' variables.
(clean-stage[+id+]-[+prefix+][+module+]): Likewise, and make it into
a single shell execution.
(configure-[+prefix+][+module+], all-[+prefix+][+module+]): For
bootstrapped modules, make the stage1 module if the build was not
started yet, else build the current stage.
(all-host, all-target): Omit bootstrapped modules (if bootstrapping).
(all-build, all-host, all-target, [+make_target+]-host,
[+make_target+]-target): Do not use \-continued lines.
(target modules): Depend on stage_last, not all-gcc, if bootstrapping.
(current_stage, restrap, stage_last): New.
* Makefile.in: Regenerate.
* configure: Regenerate.
Sync from gcc:
2006-01-04 Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/24252
* Makefile.def (flags_to_pass): Add STAGE1_CFLAGS and STAGE1_LANGUAGES.
* Makefile.tpl (OBJDUMP): New.
(EXTRA_HOST_FLAGS): Add it.
(EXTRA_GCC_FLAGS): Remove flags already specified in flags_to_pass.
* Makefile.tpl (stage[+id+]-start, stage[+id+]-end): Do not try
to use symbolic links between directories. Avoid race conditions
or make them harmless.
* configure.in: Do not try to use symbolic links between directories.
* Makefile.def (LEAN): Pass.
* Makefile.tpl (LEAN): Define.
(stage[+id+]-start): Accept that the previous directory does not
exist, if the bootstrap is lean.
(stage[+id+]-bubble): Invoke lean bootstrap commands after
stage[+id+]-start. Use a makefile variable and an `if' instead of a
configure substitution.
([+compare-target+]): Likewise.
([+bootstrap-target+]-lean): New.
* configure.in: Remove lean bootstrap support from here.
* Makefile.in: Regenerate.
* configure: Regenerate.
2006-01-02 Andreas Schwab <schwab@suse.de>
* configure.in: When reconfiguring remove Makefile in
all stage directories.
* configure: Regenerate.
Revert Ada-related part of the previous change.
* Makefile.def (ADAFLAGS, BOOT_ADAFLAGS, ADAFLAGS_FOR_TARGET):
Do not pass.
* Makefile.tpl (BOOT_ADAFLAGS): Do not define.
* Makefile.in: Regenerate.
* configure.in: Do not include mt-ppc-aix target fragment.
* configure: Regenerate.
config:
2005-12-20 Paolo Bonzini <bonzini@gnu.org>
Revert Ada-related part of the previous change.
* mt-ppc-aix: Delete.
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
Sync with gcc:
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
* configure.in (CONFIGURED_BISON, CONFIGURED_YACC, CONFIGURED_M4,
CONFIGURED_FLEX, CONFIGURED_LEX, CONFIGURED_MAKEINFO): Remove
"CONFIGURED_" from the AC_CHECK_PROGS invocation. Move below.
Find in-tree tools if available.
(EXPECT, RUNTEST, LIPO, STRIP): Find them and substitute them.
(CONFIGURED_*_FOR_TARGET): Don't set nor substitute.
(*_FOR_TARGET): Set them with GCC_TARGET_TOOL.
(COMPILER_*_FOR_TARGET): New.
* Makefile.tpl (HOST_EXPORTS): Add *_FOR_TARGET symbols that gcc needs.
(BASE_TARGET_EXPORTS): Use COMPILER_*_FOR_TARGET symbols.
(CONFIGURED_*, USUAL_*): Remove.
(BISON, YACC, FLEX, LEX, M4, MAKEINFO, EXPECT, RUNTEST, LIPO,
STRIP): Use autoconf substitutions.
(COMPILER_AS_FOR_TARGET, COMPILER_LD_FOR_TARGET,
COMPILER_NM_FOR_TARGET): New.
(EXTRA_HOST_FLAGS): Pass LIPO and STRIP.
(all): Make all-host and all-target in parallel.
(do-[+make_target+], do-check, install, [+compare-target+]): Ensure
that $$r and $$s are set before invoking a recursive make.
(stage[+id+]-bubble): Likewise, and invoke the comparison at the end.
([+bootstrap-target+]): Inline most of the `all' target.
2005-11-29 Ben Elliston <bje@au.ibm.com>
* Makefile.tpl (clean-target-libgcc): Invoke clean-target-libgcc
from the gcc build directory.
* Makefile.in: Regenerate.
2005-11-29 Ben Elliston <bje@au.ibm.com>
* Makefile.def: Add new libdecnumber host_module. Make all-gcc
depend on all-libdecnumber.
* configure.in (host_libs): Include libdecnumber.
* Makefile.in: Regenerate.
* configure: Likewise.
2005-11-21 Kean Johnston <jkj@sco.com>
* config.sub, config.guess: Sync from upstream sources.
config:
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
* acx.m4 (GCC_TARGET_TOOL): New.
* Makefile.tpl (CONFIGURE_GDB_TK, INSTALL_GDB_TK): New variables.
(configure-gdb, install-gdb): New rules.
* configure.in: Set CONFIGURE_GDB_TK and INSTALL_GDB_TK.
* Makefile.in, configure: Regenerated.
* Makefile.def: Remove libstdcxx_incdir, libsubdir, gxx_include_dir,
gcc_version, and gcc_version_trigger from set of flags to pass.
* Makefile.tpl: Remove definitions of above variables.
(config.status): Remove dependency on $(gcc_version_trigger).
* Makefile.in: Regenerate.
* configure.in: Do not reference config/gcc-version.m4 nor
config/gxx-include-dir.m4. Do not invoke TL_AC_GCC_VERSION nor
TL_AC_GXX_INCLUDE_DIR. Do not set gcc_version_trigger.
* configure: Regenerate.
config:
* gxx-include-dir.m4: In all substitutions, leave $(gcc_version)
to be expanded by the Makefile.
Sync from gcc.
2005-02-28 Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/17383
* Makefile.def (target_modules): Remove "stage", now unnecessary.
* Makefile.tpl (HOST_SUBDIR): New substitution.
(STAGE_HOST_EXPORTS, EXPECT, HOST_LIB_PATH, USUAL_AR_FOR_TARGET,
USUAL_AS_FOR_TARGET, USUAL_DLLTOOL_FOR_TARGET, USUAL_GCC_FOR_TARGET,
USUAL_LD_FOR_TARGET, USUAL_NM_FOR_TARGET, USUAL_OBJDUMP_FOR_TARGET,
USUAL_RANLIB_FOR_TARGET, USUAL_WINDRES_FOR_TARGET): Use it.
(Host modules, Bootstrapped modules): Use it.
(Build modules, Target modules): Do not create symlink trees,
always configure out-of-srcdir.
(distclean): Try removing $(host_subdir) with rm before using rm -rf.
* configure.in (FLAGS_FOR_TARGET, CC_FOR_TARGET, GCJ_FOR_TARGET,
GFORTRAN_FOR_TARGET, CXX_FOR_TARGET, RAW_CXX_FOR_TARGET): Use
$(HOST_SUBDIR). Create a symlink for host_subdir.
* Makefile.in: Regenerate.
* configure: Regenerate.
Merged from libada-gnattools-branch:
2004-11-28 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.def: Add gnattools as a module, depending on target-libada.
* Makefile.in: Regenerate.
* configure.in: Include gnattools in host_tools; disable it if ada
is disabled.
* configure: Regenerate.
config:
2005-02-28 Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/17383
* acx.m4 (GCC_TOPLEV_SUBDIRS): Set HOST_SUBDIR if an in-src
gcc build is going.
PR bootstrap/17383
* Makefile.def (target_modules): Remove stage parameter,
it is always true now.
* Makefile.tpl (configure-build-[+module+],
configure-target-[+module+]): Always build symlink tree
for the directory and for include. BUILD_SUBDIR and
TARGET_SUBDIR cannot be . anymore.
* Makefile.in: Regenerate.
* configure.in: Remove all instances of build-fixincludes from
noconfigdirs.
(build_configargs): Supply --target to subdirectories.
* configure: Regenerate.
* Makefile.def: Make gcc install depend on fixincludes install.
* Makefile.in: Regenerate.
* Makefile.def (bootstrap stages): Add 'lean' parameter.
* Makefile.tpl (configure-stageN-*, all-stageN-*): Turned into
phony targets; do not generate timestamp files.
(distclean-stageN): Remove references to their timestamp files.
(restageN, touch-stageN): Remove.
(stageN-bubble): Rewritten.
(compare): Support lean bootstraps.
* Makefile.in: Regenerate.
* configure.in: Only warn when bootstrapping but
build != host or build != target. Support lean bootstraps.
* configure: Regenerate.
Sync from gcc:
2004-08-26 Phil Edwards <phil@codesourcery.com>
* configure.in: Give a better error message if GMP/MPFR are missing
and a language needing them has been requested.
* configure: Regenerated.
2004-08-25 Phil Edwards <phil@codesourcery.com>
* configure.in: Print a list of available language front-ends if
a requested one is missing. Tidy stray tab characters.
* configure: Regenerated.
* Makefile.in: Regenerate.
* configure: Regenerate.
* Makefile.def (bootstrap-stage): Rename extra_*_flags to
stage_*_flags.
* Makefile.tpl (configure-[+module+], all-[+module+]): Exit
for bootstrapped modules if toplevel bootstrap is going.
(GCC bootstrap): Generate per-stage targets for all bootstrapped
modules. Adjust for changes in Makefile.def. Enable several
rules even in non-bootstrap mode, just to avoid peppering the
template with unnecessary "@if/@endif gcc-bootstrap" pairs.
(stage-[+prev+]-bubble): Remove.
* Makefile.def (Dependencies): Depend on all-build-bison,
all-build-flex, all-build-byacc, all-build-texinfo, rather
than the host variations.
* Makefile.tpl (BUILD_DIR_PREFIX): Remove. Replace throughout
with BUILD_SUBDIR.
(BISON): Update for recent Bisons.
(YACC): Fix typo.
(cross): Depend on all-build.
(all): Do not depend on all-build.
(prebootstrap): Remove.
(dep-kind): Accept separate prefixes for MODULE and ON variables.
(Prebootstrap dependencies): Add them to the per-stage targets
and to all-prebootstrap.
* configure.in (build_configdirs): Always enable build_tools.
(BUILD_DIR_PREFIX): Remove.
* Makefile.def (gcc): Add target variable.
(gdb, expect, guile, tk, tix): Replace with_x with extra_make_flags.
* Makefile.tpl (Autogenerated `all-*' targets): Invoke $(TARGET-*)
in the recursive `make', instead of hardwiring `all'.
(Autogenerated TARGET-* variables): New.
* Makefile.def (bfd, opcodes, gcc, zlib): Mark as bootstrap module.
(bison, byacc, flex, texinfo): Do not mark as bootstrap module.
(Dependencies): New section.
* Makefile.tpl (Dependencies): Generate from Makefile.def.
(configure-target-[+module+]): Depend on maybe-all-gcc
(all-prebootstrap): New name of all-bootstrap. Changed throughout.
(toplevel profiledbootstrap): Fix dependencies.
* Makefile.in: Regenerate.
* Makefile.def (host-modules): Add gcc.
* Makefile.in: Regenerate.
* Makefile.tpl (sorry): New rule.
(configure-host, all-host, [+make_target+]-host, do-check,
install-host): Do not add gcc as a special case.
(host modules): Add a small special-casing for gcc. Export
extra_make_flags through the environment.
(maybe-configure-gcc, configure-gcc, maybe-all-gcc, all-gcc,
maybe-check-gcc, check-gcc, maybe-install-gcc, install-gcc,
other recursive targets for gcc): Remove.
(all, do-[+make_target+], do-check): Wrap between unstage and stage.
(stage, unstage): New rules.
(stage[+id+]-start, stage[+id+]-end, [+compare-target+],
distclean-stage[+id+]): Use stage_current.
([+bootstrap-target+], profiledbootstrap): Do not invoke manually
the stage*-start rules.
* Makefile.def (build_modules): Add bison, byacc, flex,
m4, texinfo.
(flags_to_pass): Add FLEX.
* Makefile.tpl (BUILD_DIR_PREFIX, BASE_EXPORTS): New.
(BUILD_EXPORTS, HOST_EXPORTS, BASE_TARGET_EXPORTS): Include it.
(DEFAULT_YACC, USUAL_YACC, DEFAULT_LEX, USUAL_LEX, DEFAULT_M4,
DEFAULT_MAKEINFO): Remove.
(CONFIGURED_YACC, CONFIGURED_FLEX, CONFIGURED_BISON,
CONFIGURED_LEX, CONFIGURED_M4, CONFIGURED_MAKEINFO): Substitute.
(YACC, FLEX, BISON, LEX, M4, MAKEINFO): Define to look into
objdir or else use configured tool.
(all-build): New.
(all): Depend on it.
(Build module dependencies): Add.
* Makefile.in: Regenerate.
* configure.in: Better support for multiple build modules,
matching what is done for host/target modules. Do not look
for "plausible" locations of build tools if Canadian cross.
Use autoconf's AC_PROG_CC to find a C compiler. Define
BUILD_DIR_PREFIX. Look for flex, makeinfo and m4.
* configure: Regenerate.
* Makefile.tpl (touch-stage[+id+]): New.
(restage[+prev+]): Depend on touch-stage[+id+].
* Makefile.tpl (RECURSE_FLAGS_TO_PASS): New.
Use it throughout.
* Makefile.def: Add profile and feedback bootstrap stages.
Remove next field from bootstrap stages.
* Makefile.tpl (LN, LN_S): Substitute.
(stageN-start, stageN-end): Use double-colon rules, to
provide a hook for additional setup commands.
(distclean-stageN-gcc, restageN): Create dependencies from
[+prev+], not from [+next+].
(stageN-bubble): Add commands for successive stages from
[+prev+], using double-colon rules.
(all-stageN-gcc): Fix typo.
(stagefeedback-start, profiledbootstrap): New.
* Makefile.in: Regenerate.
* configure.in: Call ACX_PROG_LN.
* configure: Regenerate.
config/ChangeLog:
2004-06-09 Paolo Bonzini <bonzini@gnu.org>
* acx.m4 (ACX_PROG_LN): From gcc, modified to
accept a parameter.
* Makefile.tpl (all.normal): Rename to all.
(all): Replace with a rule to pick the default
target from configure.
(all-gcc, configure-gcc): Use conditionals to
do nothing when toplevel bootstrap is going on.
(GCC directory bootstrap) [gcc-bootstrap]: Disable.
(Toplevel bootstrap) [gcc-no-bootstrap]: Disable.
* configure.in: Support --enable-bootstrap.
* Makefile.def: Remove new- prefix from toplevel
bootstrap targets.
* Makefile.tpl: Likewise.
* Makefile.def: Add bootstrap_stage 4. Add bootstrap2
target.
* Makefile.tpl (Toplevel bootstrap): Pass $(BASE_FLAGS_TO_PASS)
$(RECURSE_FLAGS) to recursive invocation of make.
* Makefile.in: Regenerate.
* configure: Regenerate.
2004-04-27 Paolo Bonzini <bonzini@gnu.org>
Revert:
2004-04-26 Paolo Bonzini <bonzini@gnu.org>
* Makefile.def (flags_to_pass): Remove *dir variables that
are passed to the modules via TOPLEVEL_CONFIGURE_ARGUMENTS,
as well as prefix and exec_prefix.
* Makefile.in: Regenerate.
2004-04-26 Paolo Bonzini <bonzini@gnu.org>
* Makefile.def (host_modules): Mark with the bootstrap
flag packages on which gcc depends.
* Makefile.tpl (all-bootstrap): Use it.
* Makefile.in: Regenerate.
2004-04-26 Paolo Bonzini <bonzini@gnu.org>
* Makefile.def (flags_to_pass): Remove *dir variables that
are passed to the modules via TOPLEVEL_CONFIGURE_ARGUMENTS,
as well as prefix and exec_prefix.
* Makefile.in: Regenerate.
2004-04-26 Paolo Bonzini <bonzini@gnu.org>
* configure.in: Invoke ACX_PROG_CMP_IGNORE_INITIAL.
* configure: Regenerate.
* config/acx.m4: Mutuate ACX_PROG_CMP_IGNORE_INITIAL from gcc.
* gcc/Makefile.tpl (compare): Use the result of the test.
* gcc/Makefile.in: Regenerate.
2004-04-23 Paolo Bonzini <bonzini@gnu.org>
* Makefile.tpl (all-stage1-gcc, all-stage2-gcc, all-stage3-gcc):
Always relocate gcc and prev-gcc to the original names, even
if the build fails.
(new-cleanstrap, new-restage1, new-restage2, new-restage3):
New targets.
