(linux_create_inferior): Check for __ANDROID__ rather than
__SIGRTMIN.
(enqueue_one_deferred_signal): Don't requeue non-RT signals that
are already deferred.
(linux_wait_1): Check for __ANDROID__ rather than __SIGRTMIN.
(linux_resume_one_thread): Don't queue a SIGSTOP if the lwp is
stopped and already has a pending signal to report.
(proceed_one_lwp): : Don't queue a SIGSTOP if the lwp already has
a pending signal to report or is moving out of a jump pad.
(linux_init_signals): Check for __ANDROID__ rather than
__SIGRTMIN.
(WERROR_CFLAGS): New.
(INTERNAL_CFLAGS): Add WERROR_CFLAGS.
* configure.ac: Introduce --enable-werror, which adds -Werror to
the compiler command line. Enabled by default. Disable with
--disable-werror. Add -Wdeclaration-after-statement
Wpointer-arith and -Wformat-nonliteral to warning flags.
* configure: Regenerate.
(WERROR_CFLAGS): New.
(INTERNAL_CFLAGS): Add WERROR_CFLAGS.
* configure.ac: Introduce --enable-werror, which adds -Werror to
the compiler command line. Enabled by default. Disable with
--disable-werror. Add -Wdeclaration-after-statement
Wpointer-arith and -Wformat-nonliteral to warning flags.
* configure: Regenerate.
(gdbchar): New.
(expect): Use gdbchar. Check for error reading from GDB.
Clarify sync error output.
(play): Check for errors writing to GDB.
* linux-low.c (sigchld_handler): Really ignore `write' errors.
* remote-utils.c (getpkt): Check for errors writing to the remote
descriptor.
* server.c (push_event, queue_stop_reply_callback): Assert we're
not pushing a TARGET_WAITKIND_IGNORE event.
(start_inferior, start_inferior, attach_inferior, handle_v_cont)
(myresume, handle_target_event): Set the thread's last_resume_kind
and last_status from the target returned status.
* linux-x86-low.c (update_debug_registers_callback): New.
(i386_dr_low_set_addr): Use it.
(i386_dr_low_get_addr): New.
(i386_dr_low_set_control): Use update_debug_registers_callback.
(i386_dr_low_get_control): New.
(i386_dr_low_get_status): Adjust.
* linux-low.c (linux_stop_lwp): New.
* linux-low.h (linux_stop_lwp): Declare.
* i386-low.c (I386_DR_GET_RW_LEN): Take the dr7 contents as
argument instead of a i386_debug_reg_state.
(I386_DR_WATCH_HIT): Take the dr6 contents as argument instead of
a i386_debug_reg_state.
(i386_insert_aligned_watchpoint): Adjust.
(i386_remove_aligned_watchpoint): Adjust.
(i386_low_stopped_data_address): Read the debug registers from the
inferior instead of from the mirrors.
* i386-low.h (struct i386_debug_reg_state): Extend comment.
(i386_dr_low_get_addr): Declare.
(i386_dr_low_get_control): Declare.
(i386_dr_low_get_status): Change prototype.
* win32-i386-low.c (dr_status_mirror, dr_control_mirror): New globals.
(i386_dr_low_get_addr): New.
(i386_dr_low_get_control): New.
(i386_dr_low_get_status): Adjust prototype. Return
dr_status_mirror.
(i386_initial_stuff): Clear dr_status_mirror and
dr_control_mirror.
(i386_get_thread_context): Adjust.
(i386_set_thread_context): Adjust.
(i386_thread_added): Adjust.
* dwarf2read.c (dwarf2_per_objfile): New members debug_info_type_hash,
debug_types_type_hash.
(dwarf2_cu, dwarf2_per_cu_data): Delete member type_hash.
All uses updated.
(lookup_die_type): Renamed from tag_type_to_tag. First look in
appropriate type_hash table. All callers updated.
(allocate_signatured_type_table): Renamed from
allocate_signatured_type_hash_table. All callers updated.
(create_signatured_type_table_from_index): Renamed from
create_signatured_type_hash_from_index. All callers updated.
(read_die_type): Add comment. Move actual reading to ...
(read_die_type_1): ... here. New function.
(follow_die_ref_or_sig): Tweak comment.
(set_die_type): Rewrite to use appropriate choice of
debug_info_type_hash or debug_types_type_hash.
(get_die_type_at_offset): New function.
(get_die_type): Call it.
testsuite/
PR symtab/11942
* gdb.dwarf2/dw4-sig-types.cc: New file.
* gdb.dwarf2/dw4-sig-types.h: New file.
* gdb.dwarf2/dw4-sig-types-b.cc: New file.
* gdb.dwarf2/dw4-sig-types.exp: New file.
(arm_psr_thumb_bit): New. Update all uses of CPSR_T to
call this function.
(arm_pc_is_thumb): Add a gdbarch argument. Update all callers.
Check is_m after force-mode.
(arm_gdbarch_init): Check the binary before the target description.
Add check for M profile attribute. If we have an M-profile device,
but no target register description, use arm-with-m. Recognize the
new org.gnu.gdb.arm.m-profile feature and its xpsr register.
(_initialize_arm_tdep): Call initialize_tdesc_arm_with_m.
* arm-tdep.h (XPSR_T): Define.
(struct gdbarch_tdep): Add is_m member.
* features/arm-m-profile.xml, features/arm-with-m.c,
features/arm-with-m.xml: New files.
doc/
* gdb.texinfo (ARM Features): Document
org.gnu.gdb.arm.m-profile.
(read_enumeration_type): Add comment.
(process_enumeration_scope): Move definition of some locals
closer to their use.
(read_namespace_type): Add comment.
(gdbpy_event_fds): Change type to `struct serial *' a array from
int array.
(gdbpy_run_events): Change parameters. Use serial_readchar in
place of read.
(gdbpy_post_event): Use serial_write in place of write.
(gdbpy_initialize_events): Use serial_pipe instead of pipe, and
serial_async in place of add_file_handler.
* serial.c (serial_interface_lookup): Take a const char pointer.
(serial_fdopen): Rename to ...
(serial_fdopen_ops): ... this. Add an OPS parameter and use it.
Call the OPS' fdopen function if there is one.
(serial_fdopen): Rewrite as wrapper to serial_fdopen_ops.
(serial_pipe): New.
(struct serial_ops) <fdopen>: New field.
* ser-mingw.c (free_pipe_state):
(free_pipe_state): Close output on non-pex pipes.
(pipe_windows_fdopen): New.
(gdb_pipe): New.
(_initialize_ser_windows): Register pipe_windows_fdopen.
* ser-go32.c (gdb_pipe): New.
* ser-pipe.c (pipe_close): Close file descriptor even if there's
no state pointer.
(pipe_ops): Delete.
(gdb_pipe): New.
* dwarf2read.c (struct delayed_method_info): New struct.
(struct dwarf2_cu): Add vector method_list.
(scan_partial_symbols): Count methods for union, class, structure,
and interface types.
(add_to_method_list): New function.
(free_delayed_list): New function.
(compute_delayed_physnames): New function.
(process_full_comp_unit): Make a cleanup for the CU's delayed
physname list, compute the delayed physnames, and free the
the list.
(dwarf2_add_member_fn): For C++ and Java, delay the computation
of the physname until after the CU is read.
* dwarf2read.c (read_structure_type): Check if the current
DIE's type was already completed after dwarf2_full_name
was called.
* gdb.dwarf2/pr11465.exp: New test.
* gdb.dwarf2/pr11465.S: New file.
* gdb.dwarf2/dw2-double-set-die-type.S: New file.
* gdb.dwarf2/dw2-double-set-die-type.exp: New test.
