Commit Graph

44 Commits

Author SHA1 Message Date
Ken Raeburn
931a8fab1b Support for more portable alignment handling in assembly code, based on patches
from Bryan Ford <baford@schirf.cs.utah.edu>:
* read.c (potable): Added balign and p2align, for aligning by bytes or powers
of two independent of what ".align" does for a given target.
* doc/as.texinfo: Document them.
1995-04-26 20:02:18 +00:00
Ken Raeburn
b3b2623c31 under m68k description, indicate that only a subset of moto syntax is handled 1995-02-02 20:54:14 +00:00
Ken Raeburn
4b9f440949 (.section): Document as unavailable for a.out type formats. 1994-06-02 16:03:41 +00:00
Roland Pesch
8babef8561 Work around texinfo glitch (@item vs @cindex). 1994-03-26 02:46:02 +00:00
Roland Pesch
dd565f85bf (1) remove dangling references to old internal sections (pass1, difference)
(2) move explanation of new MIPS options from summary section to MIPS-options
    section; add summaries in appropriate spots.
(3) usual minor rephrasing in passing.
1994-02-16 01:52:25 +00:00
Ian Lance Taylor
1051c97f63 * config/tc-mips.c (file_mips_isa): New static variable.
(md_begin): Set it.
	(s_mipsset): Add support for .set mipN to set the ISA level.
1994-02-02 17:06:24 +00:00
Roland Pesch
cd41d0672a Stop claiming MIPS li.d and li.s insns are not supported, now that they are. 1994-02-02 03:44:39 +00:00
Roland Pesch
65fbb2d722 Three scattered fixes (nearly lost!) from early suggestions by Jeff Law. 1994-02-02 03:32:31 +00:00
Roland Pesch
03d2167461 Better organization, indexing, for MIPS-dep section. 1994-02-02 01:43:26 +00:00
Roland Pesch
fb5bec4950 (1) use new flag SMALL to control whether or not insn tables appear
where avail (see comments in src)
(2) minor proofreading improvements to HPPA sec, and page break
    improvement (for Cygnus format) to M68K sec
1994-02-02 00:01:44 +00:00
Roland Pesch
60ce6e743c Revisions from Jeff Law to HPPA-directives section.
This version formats cleanly under makeinfo, and in Cygnus format.

Default FSF format works without error, but tables of machine
instructions for some machines have stupid page boundaries (FSF
version uses larger page size).
1994-02-01 05:27:07 +00:00
Roland Pesch
81fcb3ff69 (1) eliminate GPL and refs thereto, as authorized by RMS
(2) enable MIPS-specific docn (cf PR 4434)
1994-02-01 04:36:50 +00:00
Roland Pesch
e680d73781 (1) summary descriptions of HPPA-specific directives
(2) leading comments for future updates, about places to check for new
    directives
(3) doc for new portable ".string" directive
(4) minor updates to dates etc.
1994-02-01 03:48:35 +00:00
Roland Pesch
62e59d28c2 correct typo in as cmdline synopsis (-w for -W);
describe --statistics (nee -noquiet);
describe -Z
1994-02-01 00:36:50 +00:00
Roland Pesch
47c7ceb59c Acknowlegements: surely John Gilmore's one-bit fix was proverbial,
not apocryphal.

apoc-ry-phal \-fel\ adj
(1590)
1 often cap: of or resembling the Apocrypha
2: of doubtful authenticity: SPURIOUS
syn see FICTITIOUS

pro-ver-bi-al \pre-'ver-be^--el\ adj
(1548)
1: of, relating to, or resembling a proverb
2: that has become a proverb or byword: commonly spoken of
1994-01-31 20:47:07 +00:00
Roland Pesch
05a0e43b83 Many scattered edits, primarily on recent mods.
Ancient "Internals" text deleted.
1994-01-28 04:32:37 +00:00
Jeff Law
509d5555dc More changes as suggested by Roland. Fix buglets so that it passes makeinfo. 1994-01-26 06:00:44 +00:00
Jeff Law
9dcf805766 * doc/{all.texi,as.texinfo}: Add documentation for HPPA port. 1994-01-25 23:54:34 +00:00
Roland Pesch
8d8ddccbe0 Updates for Hitachi H8/300H 1993-07-10 00:31:03 +00:00
Ken Raeburn
342143440a Updated list of m68k options, described required-register-prefix hack.
Added a tiny bit of documentation on MIPS target.
Minor tweaks to `-a' description.
1993-05-14 11:00:17 +00:00
Roland Pesch
0193a5f204 adhere to "start-sanitize-FOO" and "end-sanitize-FOO" convention 1993-04-21 01:01:14 +00:00
Roland Pesch
f009d0ab7e (1) Hitachi SH material (sanitizable)
(2) remove smallbook/cropmarks comments; switching to smallbook is now
    automatic w/house style
(3) use `|' alternative convention for SPARC dependent options.
    UnGNUish, but the convention is used for other machines in this book.
(4) cease eliding paragraph about purpose of assembler in Hitachi configuration
(5) use SPECIAL-SYMS switch more consistently
(6) formatting improvements from Q1 release
(7) use explicit @page instead of @group in long examples listing
instruction-set summaries (because some new texinfo bug leads to
double-spacing with @group in this context)
(8) rearrange H8/500 instruction-set summary into two cols
(9) include GPL from texinfo directory rather than duplicating here
1993-04-15 23:23:21 +00:00
Roland Pesch
2d8e0f624d Back off last two checkins (this checkin identical with
devo/gas/doc/as.texinfo 1.38).
1993-04-01 01:14:33 +00:00
Ken Raeburn
0193302d9b start using new texinfo stuff -- variables, conditionals. far from complete 1993-03-30 15:16:08 +00:00
Ken Raeburn
9ebc250f2e doc changes 1992-12-03 23:40:24 +00:00
Roland Pesch
fb0c7f1f3e Explicitly call reader's attention to lack of leading . in z8k special
directives.
1992-11-26 01:38:44 +00:00
Roland Pesch
4a29041a3a Updates from SAC answers to queries on z8k stuff. 1992-11-25 01:39:45 +00:00
Roland Pesch
ba487f3ad2 Superficial editing pass over Z8000 stuff. 1992-11-24 05:21:14 +00:00
Roland Pesch
fecdbc3cc5 Format corrections to permit running through makeinfo and TeX without errors. 1992-11-23 21:59:41 +00:00
Steve Chamberlain
242d9c06b2 z8000 documentation
* Makefile.in, all.m4, as-all.texinfo as.texinfo: all modified
1992-11-19 19:49:01 +00:00
Roland Pesch
eaeebcc9d7 Remove local formatting kluges, not meant for distribution. 1992-04-28 02:35:40 +00:00
Roland Pesch
8038106352 Former -k option now -K to avoid conflict with Sun assembler.
(-K [nee -k] gives warning when difference tables altered by assembler)
1992-04-27 20:51:53 +00:00
Roland Pesch
66b818fb6e (1) Changes made yesterday, forgot to check in:
a) cleanups to node structure for Info file
    b) .lflags (ignored) doc restored (was covered previously in
       single par on .list-related directives ignored).
    c) fill in page size defaults (.psize)
    d) move text on H8/300 size suffixes to after opcode table, for
       better page breaks
    e) @alphaenumerate->@enumerate a in GPL

(2) Doc -a, -al, -as, options to enable listings and listing control
    directives; removed FIXME comments re verifying listing counter use;
    advanced titlepage date to Jan 92.
1992-01-21 22:25:37 +00:00
Roland Pesch
24b1493d18 Hitachi h8/300 config of GAS manual (first draft), and a few config
spinoffs in the direction of feature-based config rather than entirely
machine-dep.
1991-11-27 21:32:15 +00:00
Roland Pesch
7d7ecbddb0 Switch to _A29K__ (from _AMD29K__). 1991-11-26 19:41:08 +00:00
Roland Pesch
7a4c8e5ce3 Structural cleanups (node structure and M4 preprocessing structure);
minor proofreading in passing. More modest editorial attribution.
1991-09-19 02:18:43 +00:00
Roland Pesch
0b5b143aed Clean up some more _GENERIC___ contexts.
(Also attest to editor more modestly...)
1991-06-25 19:40:21 +00:00
Roland Pesch
d0281557bb Intel 960 updates; includes new text on COFF directives and symbols. 1991-03-23 01:26:32 +00:00
Roland Pesch
09352a5d3d Introduced m4 parametrization rather than comments and ignore/end ignore
to configure manual for particular platforms.
See m4 macro definitions in *.m4.
(Requires GNU or SysV m4; Berkeley won't do).
1991-03-15 22:08:02 +00:00
Roland Pesch
f4335d5682 Format cleanup for "smallbook" layout 1991-02-20 01:18:13 +00:00
Roland Pesch
63f5d7957f Minor additional formatting clean-up. 1991-02-20 00:52:28 +00:00
Roland Pesch
b50e59fec7 AMD 29K version; clean for large book size and info formatting. 1991-02-19 23:47:09 +00:00
Roland Pesch
47342e8f08 Revisions motivated by WRS:
(1) smooth language somewhat
  (2) M68K version
  (3) begin to sketch out scheme for dynamic config by arch[s]
      desired, via @c comments.  (Non-68K stuff *NOT* deleted!)
1991-02-11 12:15:04 +00:00
Roland Pesch
93b4551441 Initial revision 1991-01-17 15:34:55 +00:00