* breakpoint.c (enable_breakpoint): Don't enable watchpoint if it
went out of scope.
* exec.c (exec_close): Fix storage leak.
* exec.c (exec_file_command): Make sure that bfd doesn't realign the
output sections when patching an executable.
* mips-nat.c (store_inferior_registers): Use REGISTER_PTRACE_ADDR
when writing all registers.
* mips-tdep.c (mips_push_dummy_frame): Save floating point registers
at the right offset in the dummy frame.
* mipsread.c (psymtab_to_symtab_1): Do not complain for stProc,
stStaticProc and stEnd symbols as they are generated by gcc-2.x.
* mipsread.c (mipscoff_new_init): Initialize stabsread and buildsym.
(the usual) non-specialized versions of the manual.
gdb.texinfo: list of nonstandard init file names, with brief descriptions
(permits closing PRMS gdb/2296).
(a) to make H8 configuration come out right (first attempt since
conversion to texinfo conditionals);
(b) to exploit yesterday's makeinfo bugfix, using conditionals in menus
rather than multiple alternative menus.
2. Update H8 text to refer to H8/500 as well as H8/300.
3. Define config file gdb-config.texi as a link in Makefile, based on a
DOC_CONFIG variable.
of reading/writing registers that are shorter than REGISTER_TYPE.
* (value_from_register): Install H8500 specific code to return
proper value when register is being used as a pointer.
* h8500-tdep.c: Remove extra defines of NUM_REGS.
(h8500_skip_prologue): Use correct lengths for LINK instructions.
(FRAME_CHAIN): Change name to h8500_frame_chain. Rewrite code to
chain frames properly by combining frame pointer with T reg.
(init_extra_frame_info): Delete. It's now a macro.
(frame_args_address): Don't add PTR_SIZE. Stack args are already
offset by the correct amount off of the frame pointer.
(register_byte): Delete. It's now a macro.
(register_raw_size, register_virtual_size): Delete. Replaced by
common routine h8500_register_size, cuz there's no difference
between the raw & virtual sizes on this machine.
(register_convert_to_raw, register_convert_to_virtual): Delete,
cuz there's no difference between the raw & virtual forms.
Replaced by memcpy in tm file.
(register_virtual_type): Rename to h8500_register_virtual_type.
Get rid of pointer pseudo-regs, use _REGNUM with all reg names.
(_initialize_h8500_tdep): Get rid of crock to ensure that GDB &
emulator have same reg offsets. This is all handled in the
simulator code now.
(h8500_trapped_internalvar): New routine to detect references to
convenience vars acting as pointer pseudo-regs.
(h8500_value_trapped_internalvar): Conjure up value of pointer
pseudo-regs.
(h8500_set_trapped_internalvar): Convert set value in real
register references.
infcmd.c (read_pc, write_pc): Add h8500 specific code to handle
code segment register.
infrun.c (proceed): Simplify. Call write_pc instead of doing it
by hand.
(wait_for_inferior): Add h8500 specific code to add stack segment
when reading SP register.
remote-sim.c (fetch_register): Spacing.
tm-h8500.h: #define GDB_TARGET_IS_H8500 to make it easier to
detect cruft. Redo all register manipulation stuff. Get rid of
pointer pseudo-regs. (INIT_EXTRA_FRAME_INFO): Adds stack segment
to frame pointer. (IS_TRAPPED_INTERNALVAL,
VALUE_OF_TRAPPED_INTERNALVAR, SET_TRAPPED_INTERNALVAR): Use these
to create internal vars for pointer pseudo-regs.
of reading/writing registers that are shorter than REGISTER_TYPE.
* (value_from_register): Install H8500 specific code to return
proper value when register is being used as a pointer.
* h8500-tdep.c: Remove extra defines of NUM_REGS.
(h8500_skip_prologue): Use correct lengths for LINK instructions.
(FRAME_CHAIN): Change name to h8500_frame_chain. Rewrite code to
chain frames properly by combining frame pointer with T reg.
(init_extra_frame_info): Delete. It's now a macro.
(frame_args_address): Don't add PTR_SIZE. Stack args are already
offset by the correct amount off of the frame pointer.
(register_byte): Delete. It's now a macro.
(register_raw_size, register_virtual_size): Delete. Replaced by
common routine h8500_register_size, cuz there's no difference
between the raw & virtual sizes on this machine.
(register_convert_to_raw, register_convert_to_virtual): Delete,
cuz there's no difference between the raw & virtual forms.
Replaced by memcpy in tm file.
(register_virtual_type): Rename to h8500_register_virtual_type.
Get rid of pointer pseudo-regs, use _REGNUM with all reg names.
(_initialize_h8500_tdep): Get rid of crock to ensure that GDB &
emulator have same reg offsets. This is all handled in the
simulator code now.
(h8500_trapped_internalvar): New routine to detect references to
convenience vars acting as pointer pseudo-regs.
(h8500_value_trapped_internalvar): Conjure up value of pointer
pseudo-regs.
(h8500_set_trapped_internalvar): Convert set value in real
register references.
infcmd.c (read_pc, write_pc): Add h8500 specific code to handle
code segment register.
infrun.c (proceed): Simplify. Call write_pc instead of doing it
by hand.
(wait_for_inferior): Add h8500 specific code to add stack segment
when reading SP register.
remote-sim.c (fetch_register): Spacing.
tm-h8500.h: #define GDB_TARGET_IS_H8500 to make it easier to
detect cruft. Redo all register manipulation stuff. Get rid of
pointer pseudo-regs. (INIT_EXTRA_FRAME_INFO): Adds stack segment
to frame pointer. (IS_TRAPPED_INTERNALVAL,
VALUE_OF_TRAPPED_INTERNALVAR, SET_TRAPPED_INTERNALVAR): Use these
to create internal vars for pointer pseudo-regs.
(gdb_target_udi): New procedure to set the UDI target.
(gdb_start): Don't remove *_soc files. Use gdb_target_udi.
* gdb.t00/default.exp: Added expected failures for a29k-*-udi.
Added waits for prompts after several question responses. Added
some more responses used by a29k-amd-udi-gdb.
* gdb.t01/run.exp, gdb.t06/break.exp: Added a29k-*-udi support:
pass different arguments, restart UDI connection after program
completion.
* gdb.t02/whatis.exp, gdb.t03/ptype.exp, gdb.t07/watchpoint.exp,
gdb.t08/opaque.exp, gdb.t11/list.exp, gdb.t12/scope.exp,
gdb.t15/funcargs.exp, gdb.t16/printcmds.exp, gdb.t20/misc.exp,
gdb.t21/cplusfuncs.exp: Added expected failures for a29k-*-*.
* gdb.t04/setvar.exp, gdb.t05/expr.exp, gdb.t07/watchpoint.exp,
gdb.t08/opaque.exp, gdb.t12/scope.exp, gdb.t13/bitfields.exp,
gdb.t15/funcargs.exp, gdb.t16/printcmds.exp,
gdb.t17/callfuncs.exp, gdb.t20/classes.exp, gdb.t20/inherit.exp,
gdb.t20/misc.exp, gdb.t22/virtfuncs.exp: Restart UDI connection
after program completion.
* gdb.t10/crossload.exp: Does not work for a29k-*-*, since BFD is
compiled with a SELECT_VECS setting.
* gdb.t15/funcargs.exp: Use argument to backtrace to prevent
infinite recursion.
* gdb.t20/classes.exp, gdb.t20/inherit.exp, gdb.t22/virtfuncs.exp:
Added checks for COFF results, and made them expected failures for
all targets. It would be better to make them expected failures
for COFF targets only.
get linked to nm.h, xm.h, and tm.h respectively by configure,
moved to appropriate config/<cpu> subdirectory.
* nm-sysv4.h, xm-sysv4.h, tm-sysv4.h, tm-sunos.h, nm-trash.h:
Native, host, and target files that are common across more than
one cpu architecture and included by one of the configured
native, host, or target files, get moved to config directory.
