* config/gdbserver.exp (gdb_load): Handle the case
in which the arguments to gdbserver are given in the
baseboard configuration file.
Also handle the case in which the server needs to do a
load.
* remote.c (bin2hex, hex2bin): New functions. Factor out these
two conversions which are coded for repeatedly in this module.
(remote_threads_extra_info, remote_wait, remote_async_wait,
store_register_using_P, remote_store_registers, remote_write_bytes,
remote_read_bytes, remote_rcmd): Use bin2hex and hex2bin instead
of coding the conversions inline.
(fromhex): Not exported, change from extern to static.
and gdbtk-stack.o.
(SUBDIR_GDBTK_SRCS): Ditto for the sources.
(gdbtk-bp.o): New rule.
(gdbtk-register.o): New rule.
(gdbtk-stack.o): New rule.
(gdbtk-cmds.o): Update dependencies.
(gdbtk.o): Ditto.
(gdbtk-hooks.o): Ditto.
(gdbtk-varobj.o): Ditto.
* symfile.c (symbol_file_add_main_1): New static function.
Passes the flags arguments to symbol_file_add() and takes care
of any necessary reinitializations.
(symbol_file_command): Call symbol_file_add_main_1() instead of
symbol_file_add().
(symbol_file_add_main): Ditto.
* sh3-rom.c (_initialize_sh3_rom): Get rid of specific _WINDOWS
conditional for help with connections through parallel ports,
given that the actual code for downloading through a parallel port
is not conditionalized.
* sh-tdep.c: Remove WIN32_WCE conditional. The wince sh target is
unmaintaned, and probably on its way to obsolescence.
(i386_register_convertible): New function.
* config/i386/tm-i386.h (REGISTER_VIRTUAL_TYPE): Redefine in terms
of i386_register_virtual_type.
(REGISTER_CONVERTIBLE): Redefine in terms of
i386_register_convertible.
(i386_register_virtual_type, i386_register_convertible): New
prototypes.
saves in general.
* config/mn10300/tm-mn10300.h (D0_REGNUM, A0_REGNUM, MDRQ_REGNUM,
MCRH_REGNUM, MCRL_REGNUM, MCVF_REGNUM): New definitions.
(enum movm_register_bits): New enum.
* mn10300-tdep.c (set_movm_offsets): Use symbolic names for the
bits, not hex literals. Handle the `other', `exreg0', and
`exother' bits. Correct handling of `exreg1': it saves r4, r5,
r6, and r7, not r2, r3, r4, and r5.
(saved_regs_size): New function.
(mn10300_frame_chain, mn10300_frame_saved_pc): Use it, instead
of computing the same thing inline, incorrectly.
stuff out into mn10300_pop_frame_regular, and use
generic_pop_current_frame. This lets us share code, and also
makes this function's prototype match that expected by gdbarch.
Make this function static.
(mn10300_pop_frame_regular): New function.
(mn10300_gdbarch_init): Register mn10300_pop_frame as the
gdbarch's pop_frame method.
* config/mn10300/tm-mn10300.h (POP_FRAME): Delete definition.
(mn10300_pop_frame): Delete declaration.
mn10300_extract_return_value,
mn10300_extract_struct_value_address, mn10300_store_return_value,
mn10300_use_struct_convention, mn10300_breakpoint_from_pc,
mn10300_frame_chain, mn10300_skip_prologue,
mn10300_push_arguments, mn10300_push_return_address,
mn10300_store_struct_return, mn10300_frame_saved_pc,
mn10300_init_extra_frame_info, mn10300_frame_init_saved_regs):
Make these functions static; they should only be visible to the
outside world as gdbarch methods.
than the tm-*.h file.
* config/mn10300/tm-mn10300.h (MAX_REGISTER_VIRTUAL_SIZE,
REGISTER_BYTES, FP_REGNUM, BREAKPOINT_FROM_PC,
FUNCTION_START_OFFSET, DECR_PC_AFTER_BREAK, INNER_THAN,
SAVED_PC_AFTER_CALL, INIT_EXTRA_FRAME_INFO, FRAME_INIT_SAVED_REGS,
FRAME_CHAIN, FRAME_CHAIN_VALID, FRAME_SAVED_PC,
EXTRACT_RETURN_VALUE, EXTRACT_STRUCT_VALUE_ADDRESS,
STORE_RETURN_VALUE, STORE_STRUCT_RETURN, SKIP_PROLOGUE,
FRAME_ARGS_SKIP, FRAME_ARGS_ADDRESS, FRAME_LOCALS_ADDRESS,
FRAME_NUM_ARGS, POP_FRAME, USE_GENERIC_DUMMY_FRAMES, CALL_DUMMY,
CALL_DUMMY_START_OFFSET, CALL_DUMMY_BREAKPOINT_OFFSET,
CALL_DUMMY_LOCATION, FIX_CALL_DUMMY, CALL_DUMMY_ADDRESS,
TARGET_READ_FP, PUSH_RETURN_ADDRESS, PUSH_DUMMY_FRAME,
SAVE_DUMMY_FRAME_TOS, PUSH_ARGUMENTS, PC_IN_CALL_DUMMY,
REG_STRUCT_HAS_ADDR, USE_STRUCT_CONVENTION, GET_SAVED_REGISTER):
Delete definitions. We register gdbarch methods for these now.
(struct frame_info, struct type, struct value): Delete forward
declarations of these types; they're no longer necessary, since we
don't have function declarations here any more.
* mn10300-tdep.c: #include "arch-utils.h", to get declarations for
some default gdbarch methods.
(mn10300_store_struct_return): Return void, as expected by
gdbarch.
(mn10300_init_extra_frame_info): Take initial `fromleaf' argument,
as expected by gdbarch.
(mn10300_frame_init_saved_regs): Provide dummy definition for
this, as required by gdbarch.
(mn10300_gdbarch_init): Add mn10300_call_dummy_words, as expected
by gdbarch. Register gdbarch methods or values for all the stuff
removed from tm-10300.h, listed above.
set up the display for testing.
(gdbtk_start): Convert all paths to paths that tcl will like.
Export target information to environment.
(_gdbtk_xvfb_init): New proc to start Xvfb if available and
necessary.
(_gdbtk_xvfb_exit): New proc to kill Xvfb if necessary.
(to_tcl_path): New proc to convert a given pathname into
a path acceptible as an argument to a tcl command.
(_gdbtk_export_target_info): New proc to export target info
into the environment for gdbtk testing.
(gdbtk_done): New proc to signal end-of-test.
* thread-db.c (keep_thread_db): Adjust comment.
(deactivate_target): Removed.
(thread_db_new_objfile): Don't call deactivate_target. Implement
guts of deactivate_target inline instead.
(attach_thread): Call ATTACH_LWP unconditionally if defined.
(thread_db_attach): New function.
(thread_db_detach): Don't call deactivate_target. Do necessary
cleanup inline instead. Set inferior_ptid to LWP corresponding to
the current user-level thread.
(thread_db_kill): Set inferior_ptid to LWP corresponding to the
current user-level thread.
(thread_db_create_inferior): Deactivate target vector if
KEEP_THREAD_DB is zero.
(thread_db_mourn_inferior): Don't call deactivate_target. Do
necessary cleanup inline instead.
(init_thread_db_ops): Initialize to_attach field to
thread_db_attach.
* lin-lwp.c (lin_lwp_mourn_inferior): Remove prototype.
(stop_wait_callback): Add prototype.
(init_lwp_list): Add comment about when to re-initialize the LWP
list.
(lin_lwp_attach_lwp): Only call ptrace for cloned processes.
Avoid adding publicates to the LWP list. Only mark an LWP as
signalled if it doesn't correspond to a cloned process.
(lin_lwp_attach): Add initial process to the LWP list. Make sure
it's stopped and fake a SIGSTOP.
(detach_callback): New function.
(lin_lwp_detach): Implement.
(lin_lwp_create_inferior): Don't re-initialize LWP list here.
Call child_ops.to_create_inferior directly instead of via
target_beneath local.
(lin_lwp_mourn_inferior): Call child_ops.to_mourn_inferior
directly instead of via target_beneath local.
instead of non-portable search for `/'. Use FILENAME_CMP instead
of STREQ, to account for case-insensitive filesystems.
(top-level): #include "filenames.h".
its address, to decide whether it's a watchpoint or not. Zero
is a valid code address.
(update_breakpoints_after_exec): Admonishing comments.
* breakpoint.h (struct breakpoint): Doc fixes.
* config/sid.exp (gdb_target_sid): Check for error messages.
On error or timeout, don't make expect exit (which will terminate
all subsequent tests); instead just make gdb exit.
(gdb_load): Check for error messages. On error or timeout,
return a negative value.
* sid.exp (sid_exit): Pass host, not target, to remote_close.
2001-01-25 matthew green <mrg@redhat.com>
* config/sid.exp (sid_start): Call `remote_push_conn' after firing
up sid.
(sid_exit): Call `remote_pop_conn' after GDB is gone.
2001-01-25 matthew green <mrg@redhat.com>
* config/sid.exp (sid_start): Use `remote_spawn' instead of `spawn.'
Deprecate $sid_spawn_id.
(sid_exit): Remove code necessary only for `spawn.'
2001-01-25 matthew green <mrg@redhat.com>
* config/sid.exp (sid_start): Handle sim,protocol of `sid.'
(rs6000_in_solib_return_trampoline): Declare.
* rs6000-tdep.c (rs6000_in_solib_return_trampoline): New
function.
(rs6000_skip_trampoline_code): Skip bigtoc fixup code.
* xcoffread.c (read_xcoff_symtab): Perform the ISFCN function
check after the CSECT check rather than before it. Allocate
separate symtabs for CSECTs whose names begin with '@'.
(scan_xcoff_symtab): Don't ignore symbols beginning with '@'.
Activate the misc_func_recorded mechanism for whose names begin
with '@'.
* sh-tdep.c: Get rid of the function prototypes.
(sh_sh4_build_float_register_type): Move earlier in file.
(fv_reg_base_num): Ditto.
(dr_reg_base_num): Ditto.
* thread-db.c: Revert 2001-04-26 change for debugging output.
* lin-lwp.c: Ditto.
* lin-lwp.c: Add set/show debug lin-lwp command. Use this
command to turn extra debugging output on / off.
(top-level): #include filenames.h.
* dwarf2read.c (dwarf2_start_subfile): Use IS_ABSOLUTE_PATH and
FILENAME_CMP, to DTRT on non-Posix platforms.
(top-level): #include filenames.h.
* i387-nat.c (i387_supply_fxsave, i387_fill_fxsave, i387_tag): Fix
typos in which hexadecimal constants were really intended to be
binary constants.
(i387_tag): Swap logic regarding zero vs non-zero exponents.
Abstract out operations specific to particular C++ ABI's, and
invoke them through a function table. This removes the C++ ABI
dependencies scattered throughout the code, and allows us to
cleanly add support for new C++ ABI's.
* cp-abi.h, cp-abi.h, gnu-v2-abi.c, hpacc-abi.c: New files.
* c-typeprint.c, c-valprint.c, dbxread.c, eval.c, gdbtypes.c,
jv-typeprint.c, linespec.c, symtab.c, typeprint.c, valops.c:
#include "cp-abi.h". These files all use functions now declared
there.
* symtab.h (OPNAME_PREFIX_P, VTBL_PREFIX_P, DESTRUCTOR_PREFIX_P):
Deleted. These services are now provided by functions declared in
cp-abi.h.
* value.h (value_rtti_type, value_virtual_fn_field): Same.
* values.c (value_virtual_fn_field): Same, for this definition.
* valops.c (value_rtti_type): Same.
* c-typeprint.c (c_type_print_base): Use the functions from
"cp-abi.h", instead of the old macros, or hard-coded ABI-specific
tests.
* dbxread.c (record_minimal_symbol): Same.
* gdbtypes.c (get_destructor_fn_field, virtual_base_index,
virtual_base_index_skip_primaries): Same.
* jv-typeprint.c (java_type_print_base): Same.
* linespec.c (find_methods, decode_line_1): Same.
* symtab.c (gdb_mangle_name): Same.
* Makefile.in (SFILES): Add the new .c files mentioned above.
(cp_abi_h): New variable.
(COMMON_OBS): Add gnu-v2-abi.o, hpacc-abi.o, and cp-abi.o.
(cp-abi.o, gnu-v2-abi.o, hpacc-abi.o): New targets.
(c-typeprint.o, c-valprint.o, dbxread.o, eval.o, gdbtypes.o,
jv-typeprint.o, symtab.o, linespec.o, typeprint.o, valops.o): Add
dependency on $(cp_abi_h).
* thread-db.c (_initialize_thread_db): Add set/show command
"debug-linux-threads" for debugging output.
* lin-lwp.c (various): Use global "debug_linux_threads to
turn on extra debugging output.
* config/i386/tm-i386.h (FRAMELESS_FUNCTION_INVOCATION): Redefine
in terms of i386_frameless_function_invocation. Adjust comment.
(i386_frameless_function_invocation): New prototype.
* solib.c (no_shared_libraries): New function. Discard all symbols
from shared libraries.
(_initialize_solib): Add command "nosharedlibrary" as complement
to the command "sharedlibrary". Unloads symbols for all solibs.
* remote.c (remote_open_1): On opening the remote target, activate
the solib_create_inferior_hook, so that it can detect when the
target loads shared libraries.
(remote_async_open_1): Ditto.
(aix5_relocate_main_executable): Don't use file offsets for
determining corresponding sections and map file entries. Call
map_index_vs_section_name_okay() to do this instead.
From Adam Mirowski <Adam.Mirowski@Sun.COM>
Fixed Insight on Solaris. It was not possible to debug a process
because of EINTR "errors".
* procfs.c: (procfs_wait): if proc_wait_for_stop() fails
with EINTR, retry the call.
* arch-utils.c (default_prepare_to_proceed)
(generic_prepare_to_proceed): Added new functions.
* arch-utils.h: New function declarations for
default_prepare_to_proceed() and generic_prepare_to_proceed().
* gdbarch.sh: Added PREPARE_TO_PROCEED.
* gdbarch.c: Regenerated.
* gdbarch.h: Regenerated.
* inferior.h: Added get_last_target_status() declaration.
* infrun.c (get_last_target_status): Added new function.
(handle_inferior_event): Saves last pid and waitstatus, which will
get returned by get_last_target_status().
* hppa-tdep.c (prepare_to_proceed): Added comment stating that
prepare_to_proceed() is potentially redundant since
default_prepare_to_proceed() has been added.
* linux-thread.c (prepare_to_proceed): Ditto.
* lin-lwp.c (prepare_to_proceed): Ditto.
* m3-nat.c (prepare_to_proceed): Ditto.
From David Deephanphongs <deephan@telocity.com>
* inferior.h: Fix declarations of get_inferior_args and
set_inferior_args, which were missing the trailing 's'.
From Jimmy Guo <guo@cup.hp.com>
* top.c (init_main): set prompt if annotation_level>1,
this is necessary when annotation_level is set to 2 via
--annotate=2 command line option.
(gdbtk_test): Use PATH_MAX for home var calculation.
* remote-e7000.c (e7000_parse_device): Accomodate Cygwin as well as Win32 in
test.
* ser-tcp.c: Use modern __CYGWIN__ conditional.
* source.c (mod_path): Add __CYGWIN__ conditional to WIN32 test.
(openp): Ditto.
* symfile.c (symfile_bfd_open): Ditto.
* gdbtk/generic/gdbtk.c: Ditto.
(set_remote_protocol_e_packet_cmd)
(set_remote_protocol_E_packet_cmd)
(show_remote_protocol_e_packet_command)
(show_remote_protocol_E_packet_command): New functions.
(init_all_packet_configs): Initialize remote_protocol_e and
remote_protocol_E.
(remote_resume, remote_async_resume): Support e/E command
packets.
(show_remote_cmd): Show state of remote_protocol_e and
remote_protocol_E.
(_initialize_remote): Add "set remote step-over-range-packet"
and "set remote step-over-range-w-signal-packet" to CLI.
-------------------------------------------------------------------
* config/i386/tm-i386.h (EXTRACT_STRUCT_VALUE_ADDRESS): Redefine
in terms of i386_extract_struct_value_address.
(i386_extract_struct_value_address): New prototype.
value to `unsigned long'. Change type of `value' to `unsigned
long'.
(i386_linux_dr_set): Change type of second argument to `unsigned
long'.
(i386_linux_dr_set_control): Change type of first argument to
`unsigned long'.
(i386_linux_dr_get_status): Change type of return value to
unsigned long.
* config/i386/nm-linux.h (i386_linux_dr_set_control,
i386_linux_dr_get_status): Adjust prototypes accordingly.
register before enabling it by setting the control register.
(i386_remove_aligned_watchpoint): Reset address register after
disabling it by setting the control register.
return value is TYPE_STRUCT and the number of fields is one, call
ourselves with TYPE set tp the type of the first field.
(i386_store_return_value): Likewise.
This fixes a problem with returning structs consisting of a single
`float' or `double' on *BSD.
a thread creation event for a thread that's already in the thread
list, since that may legitemately happen. Instead only call
attach_thread if it's not already in the thread list.
config/i386/nm-linux.h (including comment).
(i386_linux_frame_chain): New function implementing guts of the
former FRAME_CHAIN macro, but using read_memory_unsigned_integer
instead of read_memory_integer.
(i386_linux_frame_saved_pc): Removed doc pointing to
i386/tm-linux.h for an explanation of FRAMELESS_SIGNAL since that
now lives in this file.
* config/i386/tm-linux.h (FRAMELESS_SIGNAL): Moved to
i386-linux-tdep.c (including comment).
(FRAME_CHAIN): Redefined in terms of i386_linux_frame_chain.
(i386_linux_frame_chain): New prototype.
make it work again.
(NUM_FREGS): Redefine to 0.
(NUM_REGS): Redefine as NUM_GREGS.
(i386_register_byte, i386_register_raw_size): Update from
i386-tdep.c. Add comment about their origin.
(regmap, register_u_addr): Take these from i386-linux-nat.c.
(i386_register_u_addr): Removed.
