Andrew Cagney
3acba33923
2004-08-02 Andrew Cagney <cagney@gnu.org>
...
Replace DEPRECATED_REGISTER_RAW_SIZE with register_size.
* rs6000-tdep.c (rs6000_push_dummy_call)
(rs6000_extract_return_value): Use register_size.
* xstormy16-tdep.c (xstormy16_get_saved_register)
(xstormy16_extract_return_value): Ditto.
* valops.c (value_assign): Ditto.
* v850ice.c (v850ice_fetch_registers, v850ice_store_registers):
* v850-tdep.c (v850_extract_return_value): Ditto.
* tracepoint.c (collect_symbol): Ditto.
* target.c (debug_print_register): Ditto.
* stack.c (frame_info): Ditto.
* rs6000-nat.c (ARCH64, fetch_register, store_register): Ditto.
* rom68k-rom.c (rom68k_supply_one_register): Ditto.
* remote.c (struct packet_reg, remote_wait, remote_async_wait)
(store_register_using_P): Ditto.
* remote-vxmips.c (vx_read_register, vx_write_register): Ditto.
* remote-sim.c (gdbsim_fetch_register, gdbsim_store_register): Ditto.
* remote-mips.c (mips_wait, mips_fetch_registers): Ditto.
* remote-e7000.c (fetch_regs_from_dump, sub2_from_pc): Ditto.
* regcache.c (deprecated_read_register_bytes)
(deprecated_write_register_bytes, read_register)
(write_register): Ditto.
* ppc-linux-nat.c (fetch_altivec_register, fetch_register)
(supply_vrregset, store_altivec_register, fill_vrregset): Ditto.
* monitor.c (monitor_supply_register, monitor_fetch_register)
(monitor_store_register): Ditto.
* mn10300-tdep.c (mn10300_pop_frame_regular)
(mn10300_print_register): Ditto.
* mipsv4-nat.c (fill_fpregset): Ditto.
* mips-linux-tdep.c (supply_32bit_reg, fill_fpregset)
(mips64_fill_fpregset): Ditto.
* mi/mi-main.c (register_changed_p, get_register)
(mi_cmd_data_write_register_values): Ditto.
* lynx-nat.c (fetch_inferior_registers, store_inferior_registers):
* irix5-nat.c (fill_gregset, fetch_core_registers):
* infrun.c (write_inferior_status_register): Ditto.
* infptrace.c (fetch_register, store_register): Ditto.
* infcmd.c (default_print_registers_info): Ditto.
* ia64-linux-nat.c (COPY_REG, fill_fpregset): Ditto.
* ia64-aix-nat.c (COPY_REG, fill_gregset): Ditto.
* i386gnu-nat.c (gnu_store_registers, fill): Ditto.
* hpux-thread.c (hpux_thread_fetch_registers)
(hpux_thread_store_registers): Ditto.
* hppah-nat.c (store_inferior_registers, fetch_register):
* findvar.c (value_from_register): Ditto.
* dve3900-rom.c (fetch_bitmapped_register):
* cris-tdep.c (cris_gdbarch_init): Ditto.
* alpha-tdep.h: Ditto.
* aix-thread.c (pd_enable, fill_sprs64, fill_sprs32): Ditto.
2004-08-03 00:57:27 +00:00
Andrew Cagney
cb1a6d5f51
2004-07-26 Andrew Cagney <cagney@gnu.org>
...
* cli/cli-decode.c (deprecated_add_show_from_set): Deprecate.
* xcoffsolib.c (_initialize_xcoffsolib): Update.
* wince.c (_initialize_wince): Update.
* win32-nat.c (_initialize_win32_nat): Update.
* varobj.c (_initialize_varobj): Update.
* valops.c (_initialize_valops): Update.
* utils.c (initialize_utils, initialize_utils): Update.
* tui/tui-win.c (_initialize_tui_win): Update.
* top.c (init_main): Update.
* symfile.c (_initialize_symfile): Update.
* source.c (_initialize_source): Update.
* somsolib.c (_initialize_som_solib): Update.
* solib.c (_initialize_solib): Update.
* solib-frv.c (_initialize_frv_solib): Update.
* serial.c (_initialize_serial): Update.
* ser-go32.c (_initialize_ser_dos, _initialize_ser_dos): Update.
* remote.c (_initialize_remote, _initialize_remote): Update.
* remote-vx.c (_initialize_vx): Update.
* remote-utils.c (_initialize_sr_support): Update.
* remote-sds.c (_initialize_remote_sds): Update.
* remote-mips.c (_initialize_remote_mips): Update.
* remote-e7000.c (_initialize_remote_e7000): Update.
* proc-api.c (_initialize_proc_api): Update.
* printcmd.c: Update.
* parse.c (_initialize_parse): Update.
* pa64solib.c (_initialize_pa64_solib): Update.
* p-valprint.c (_initialize_pascal_valprint): Update.
* monitor.c (_initialize_remote_monitors): Update.
* mips-tdep.c (_initialize_mips_tdep): Update.
* mcore-tdep.c (_initialize_mcore_tdep): Update.
* maint.c (_initialize_maint_cmds): Update.
* lin-lwp.c (_initialize_lin_lwp): Update.
* language.c (_initialize_language): Update.
* kod.c (_initialize_kod): Update.
* infrun.c (set_schedlock_func, _initialize_infrun): Update.
* i386-tdep.c (_initialize_i386_tdep): Update.
* gdbtypes.c (build_gdbtypes, _initialize_gdbtypes): Update.
* gdbarch.sh: Update.
* gdbarch.c: Re-generate.
* gdb-events.sh: Update.
* gdb-events.c: Re-generate.
* frame.c (_initialize_frame): Update.
* exec.c: Update.
* demangle.c (_initialize_demangler): Update.
* dcache.c (_initialize_dcache): Update.
* cris-tdep.c (_initialize_cris_tdep, cris_version_update): Update.
* cp-valprint.c (_initialize_cp_valprint): Update.
* corefile.c (_initialize_core): Update.
* command.h: Update.
* cli/cli-decode.h: Update.
* cli/cli-cmds.c (init_cli_cmds): Update.
* charset.c (_initialize_charset): Update.
* breakpoint.c (_initialize_breakpoint): Update.
* arm-tdep.c (_initialize_arm_tdep_initialize_arm_tdep): Update.
* alpha-tdep.c (_initialize_alpha_tdep): Update.
* aix-thread.c (_initialize_aix_thread): Update.
2004-07-26 14:53:06 +00:00
Andrew Cagney
23a6d36940
2004-07-21 Andrew Cagney <cagney@gnu.org>
...
Use regcache_raw_supply instead of supply_register.
* regcache.h (supply_register): Delete declaration.
* regcache.c (supply_register): Delete function.
* wince.c (do_child_fetch_inferior_registers): Update.
* win32-nat.c (do_child_fetch_inferior_registers)
(fetch_elf_core_registers): Update.
* v850ice.c (v850ice_fetch_registers): Update.
* thread-db.c (thread_db_store_registers): Update.
* sol-thread.c (sol_thread_store_registers): Update.
* shnbsd-tdep.c (shnbsd_supply_reg): Update.
* rs6000-nat.c (fetch_register): Update.
* rom68k-rom.c (rom68k_supply_one_register): Update.
* remote.c (remote_wait, remote_async_wait): Update.
* remote-st.c (get_hex_regs): Update.
* remote-sim.c (gdbsim_fetch_register): Update.
* remote-sds.c (sds_fetch_registers): Update.
* remote-rdp.c (remote_rdp_fetch_register): Update.
* remote-rdi.c (arm_rdi_fetch_registers): Update.
* remote-mips.c (mips_wait, mips_fetch_registers): Update.
* remote-m32r-sdi.c (m32r_fetch_register): Update.
* remote-hms.c (init_hms_cmds): Update.
* remote-est.c (init_est_cmds): Update.
* remote-e7000.c (get_hex_regs, fetch_regs_from_dump)
(e7000_fetch_registers, sub2_from_pc, e7000_wait): Update.
* ppcnbsd-tdep.c (ppcnbsd_supply_reg, ppcnbsd_supply_fpreg): Update.
* ppc-linux-nat.c (fetch_altivec_register, fetch_spe_register)
(fetch_register, supply_vrregset, supply_vrregset)
(fetch_spe_registers): Update.
* ppc-bdm.c (bdm_ppc_fetch_registers): Update.
* monitor.c (monitor_supply_register): Update.
* mipsv4-nat.c (supply_gregset, supply_fpregset): Update.
* mipsnbsd-tdep.c (mipsnbsd_supply_reg)
(mipsnbsd_supply_fpreg): Update.
* mips-nat.c (fetch_inferior_registers)
(fetch_core_registers): Update.
* mips-linux-tdep.c (supply_32bit_reg, supply_gregset)
(supply_fpregset, mips64_supply_gregset)
(mips64_supply_fpregset): Update.
* m68klinux-nat.c (fetch_register, supply_gregset)
(supply_fpregset): Update.
* m68k-tdep.c (supply_gregset, supply_fpregset): Update.
* m32r-rom.c (init_m32r_cmds, init_mon2000_cmds): Update.
* lynx-nat.c (fetch_inferior_registers, fetch_core_registers): Update.
* irix5-nat.c (supply_gregset, supply_fpregset): Update.
* infptrace.c (fetch_register): Update.
* ia64-linux-nat.c (supply_gregset, supply_fpregset): Update.
* ia64-aix-nat.c (supply_gregset, supply_fpregset): Update.
* i386gnu-nat.c (fetch_fpregs, supply_gregset)
(gnu_fetch_registers, gnu_store_registers): Update.
* i386-nto-tdep.c (i386nto_supply_gregset): Update.
* i386-linux-nat.c (fetch_register, supply_gregset)
(dummy_sse_values): Update.
* hpux-thread.c (hpux_thread_fetch_registers): Update.
* hppah-nat.c (fetch_register): Update.
* hppa-linux-nat.c (fetch_register, supply_gregset)
(supply_fpregset): Update.
* go32-nat.c (fetch_register): Update.
* dve3900-rom.c (fetch_bitmapped_register)
(_initialize_r3900_rom): Update.
* cris-tdep.c (supply_gregset): Update.
* abug-rom.c (init_abug_cmds): Update.
* core-aout.c (fetch_core_registers): Update.
* armnbsd-nat.c (supply_gregset, supply_fparegset)
(fetch_register, fetch_fp_register): Update.
* arm-linux-nat.c (fetch_nwfpe_single, fetch_nwfpe_none)
(fetch_nwfpe_extended, fetch_fpregister, fetch_fpregs)
(fetch_register, fetch_regs, supply_gregset, supply_fpregset): Update.
* alphanbsd-tdep.c (fetch_core_registers): Update.
* alpha-tdep.c (alpha_supply_int_regs, alpha_supply_fp_regs): Update.
* alpha-nat.c (fetch_osf_core_registers)
(fetch_osf_core_registers, fetch_osf_core_registers): Update.
* aix-thread.c (supply_gprs64, supply_reg32, supply_fprs)
(supply_sprs64, supply_sprs32, fetch_regs_kernel_thread): Update.
2004-07-22 01:31:49 +00:00
Alan Modra
2c500098f2
* dsrec.c (load_srec, make_srec): Use bfd_get_section_size instead of
...
bfd_get_section_size_before_reloc or _raw_size.
* dwarf2-frame.c (dwarf2_build_frame_info): Likewise.
* dwarf2read.c (dwarf2_locate_sections): Likewise.
(dwarf2_read_section): Likewise.
* elfread.c (elf_locate_sections): Likewise.
* gcore.c (derive_heap_segment): Likewise.
* mipsread.c (read_alphacoff_dynamic_symtab): Likewise.
* remote-e7000.c (e7000_load): Likewise.
* remote-m32r-sdi.c (m32r_load): Likewise.
* remote-mips.c (mips_load_srec): Likewise.
(pmon_load_fast): Likewise.
* remote.c (compare_sections_command): Likewise.
* symfile.c (add_section_size_callback): Likewise.
(load_section_callback): Likewise.
(pc_in_unmapped_range): Likewise.
(pc_in_mapped_range): Likewise.
(sections_overlap): Likewise.
(list_overlays_command): Likewise.
(simple_overlay_update_1): Likewise.
(simple_overlay_update): Likewise.
* tracepoint.c (remote_set_transparent_ranges): Likewise.
* win32-nat.c (core_section_load_dll_symbols): Likewise.
2004-06-15 01:04:20 +00:00
Andrew Cagney
c27cda74c7
2004-05-25 Andrew Cagney <cagney@gnu.org>
...
* target.h (struct target_ops): Add from_tty to
to_create_inferior.
(target_create_inferior, find_default_create_inferior): Update.
* infcmd.c (run_command): Update.
* wince.c (child_create_inferior): Update.
* win32-nat.c (child_create_inferior): Update.
* uw-thread.c (uw_thread_create_inferior): Update.
* thread-db.c (thread_db_create_inferior): Update.
* target.c (debug_to_create_inferior)
(find_default_create_inferior): Update.
(maybe_kill_then_create_inferior): Update.
* sol-thread.c (sol_thread_create_inferior): Update.
* remote.c (extended_remote_async_create_inferior)
(extended_remote_create_inferior): Update.
* remote-vx.c (vx_create_inferior): Update.
* remote-st.c (st2000_create_inferior): Update.
* remote-sim.c (gdbsim_create_inferior): Update.
* remote-sds.c (sds_create_inferior): Update.
* remote-rdp.c (remote_rdp_create_inferior): Update.
* remote-rdi.c (arm_rdi_create_inferior): Update.
* remote-m32r-sdi.c (m32r_create_inferior): Update.
* remote-e7000.c (e7000_create_inferior): Update.
* procfs.c (procfs_create_inferior): Update.
* ocd.c (ocd_create_inferior): Update.
* ocd.h (ocd_create_inferior): Update.
* nto-procfs.c (procfs_create_inferior): Update.
* monitor.c (monitor_create_inferior): Update.
* lin-lwp.c (lin_lwp_create_inferior): Update.
* inftarg.c (child_create_inferior): Update.
* hpux-thread.c (hpux_thread_create_inferior): Update.
* gnu-nat.c (gnu_create_inferior): Update.
2004-05-25 14:58:31 +00:00
Andrew Cagney
0faf007628
2004-04-28 Andrew Cagney <cagney@redhat.com>
...
* stack.c (print_stack_frame_stub): Delete declaration.
(struct print_stack_frame_args, print_stack_frame)
(print_frame_info, print_frame): Replace "source" with print what.
Replace "print" with "print_level". Replace "args" with
"print_args".
* frame.h (show_and_print_stack_frame, print_stack_frame)
(print_frame_info): Update declarations.
* stack.c (select_and_print_frame, frame_command)
(current_frame_command, up_command, down_command): Update calls -
use get_selected_frame, pass "enum print_what" for source, do not
call frame_relative_level.
* mi/mi-cmd-stack.c (mi_cmd_stack_list_frames): Ditto.
* remote-rdp.c (remote_rdp_open): Ditto.
* remote-mips.c (common_open): Ditto.
* remote-e7000.c (e7000_start_remote): Ditto.
* ocd.c (ocd_start_remote): Ditto.
* mi/mi-main.c (mi_cmd_exec_return): Ditto.
* infrun.c (normal_stop): Ditto.
* inflow.c (kill_command): Ditto.
* infcmd.c (finish_command): Ditto.
* corelow.c (core_open): Ditto.
* tracepoint.c (finish_tfind_command): Ditto.
* thread.c (info_threads_command, info_threads_command)
(restore_current_thread, do_captured_thread_select): Ditto.
* ada-tasks.c (task_command): Ditto.
2004-04-28 16:36:25 +00:00
Dhananjay Deshpande
454d05118b
Fix GDB crash problem when object file of different H8 cpu is loaded
2003-12-11 06:21:12 +00:00
Kazuhiro Inaoka
85a453d541
2003-10-10 Kei Sakamoto <sakamoto.kei@renesas.com>
...
* NEWS: Replace "Hitachi" and "Mitsubishi" with "Renesas".
* README: Ditto.
* d10v-tdep.c: Ditto.
* h8300-tdep.c: Ditto.
* remote-e7000.c: Ditto.
* remote-hms.c: Ditto.
* ser-e7kpc.c: Ditto.
* sh-stub.c: Ditto.
* sh-tdep.c: Ditto.
* sh-tdep.h: Ditto.
* sh3-rom.c: Ditto.
* sh64-tdep.c: Ditto.
* top.c: Ditto.
* wince.c: Ditto.
* config/d10v/d10v.mt: Ditto.
* config/sh/embed.mt: Ditto.
* config/sh/linux.mt: Ditto.
* config/sh/tm-linux.h: Ditto.
* config/sh/tm-sh.h: Ditto.
* config/sh/wince.mt: Ditto.
2003-10-10 07:13:11 +00:00
Andrew Cagney
12c266ea56
2003-10-02 Andrew Cagney <cagney@redhat.com>
...
* gdbarch.sh (DEPRECATED_REGISTER_RAW_SIZE): Rename
REGISTER_RAW_SIZE.
* gdbarch.h, gdbarch.c: Re-generate.
* aix-thread.c, alpha-tdep.h, arm-tdep.c, core-sol2.c: Update.
* cris-tdep.c, dve3900-rom.c, findvar.c, frame.c: Update.
* hppa-tdep.c, hppab-nat.c, hppah-nat.c, hppam3-nat.c: Update.
* hpux-thread.c, i386gnu-nat.c, ia64-aix-nat.c: Update.
* ia64-linux-nat.c, ia64-tdep.c, infcmd.c, infptrace.c: Update.
* infrun.c, irix5-nat.c, lynx-nat.c, mips-linux-tdep.c: Update.
* mips-nat.c, mips-tdep.c, mipsv4-nat.c, mn10300-tdep.c: Update.
* monitor.c, ns32k-tdep.c, ppc-linux-nat.c, regcache.c: Update.
* remote-e7000.c, remote-mips.c, remote-sim.c: Update.
* remote-vxmips.c, remote-vxsparc.c, remote.c: Update.
* rom68k-rom.c, rs6000-nat.c, rs6000-tdep.c, s390-tdep.c: Update.
* sh64-tdep.c, sparc-nat.c, sparc-tdep.c, stack.c: Update.
* target.c, tracepoint.c, v850-tdep.c, v850ice.c, valops.c: Update.
* vax-tdep.c, vax-tdep.h, x86-64-tdep.c, xstormy16-tdep.c: Update.
* config/m68k/tm-delta68.h, config/m68k/tm-vx68.h: Update.
* config/sparc/tm-sparc.h, config/sparc/tm-sparclynx.h: Update.
2003-10-02 Andrew Cagney <cagney@redhat.com>
* gdbint.texinfo (Target Architecture Definition): Rename
REGISTER_RAW_SIZE to DEPRECATED_REGISTER_RAW_SIZE.
* gdb.texinfo (Packets, Stop Reply Packets): Ditto.
* gdbint.texinfo (Target Architecture Definition): Rename
2003-10-02 Andrew Cagney <cagney@redhat.com>
* mi-main.c: Rename REGISTER_RAW_SIZE to
DEPRECATED_REGISTER_RAW_SIZE.
2003-10-02 20:28:31 +00:00
Andrew Cagney
a78f21af4f
2003-06-11 Andrew Cagney <cagney@redhat.com>
...
* xstormy16-tdep.c (xstormy16_push_return_address): Make static.
(xstormy16_save_dummy_frame_tos): Make static.
(_initialize_xstormy16_tdep): Add declaration.
* vax-tdep.c (_initialize_vax_tdep): Add declaration.
* v850-tdep.c: Make local functions static.
(_initialize_v850_tdep): Add declaration.
* sparc-tdep.c: Make local functions static.
(_initialize_sparc_tdep): Add declaration.
* sh-tdep.c: Make local functions static.
(_initialize_sh_tdep): Add declaration.
* sh3-rom.c (_initialize_sh3_rom): Add declaration.
* s390-tdep.c: Make local functions static.
(_initialize_s390_tdep): Add declaration.
* dbxread.c (find_stab_function_addr): Make static.
* ppc-bdm.c (_initialize_bdm_ppc): Add declaration.
* ocd.c (_initialize_remote_ocd): Add declaration.
* dink32-rom.c (_initialize_dink32_rom): Add declaration.
* ppcbug-rom.c (_initialize_ppcbug_rom): Add declaration.
* ns32k-tdep.c (_initialize_ns32k_tdep): Add declaration.
* ns32knbsd-tdep.c (_initialize_ns32knbsd_tdep): Add declaration.
* mips-tdep.c (_initialize_mips_tdep): Add declaration.
* remote-array.c (_initialize_array): Add declaration.
(_initialize_remote_monitors): Add declaration.
* remote-mips.c: Make local functions static.
(_initialize_remote_mips): Add declaration.
* mcore-tdep.c: Make all local functions static.
(_initialize_mcore_tdep): Add declaration.
* dbug-rom.c (_initialize_dbug_rom): Add declaration.
* abug-rom.c (_initialize_abug_rom): Add declaration.
* rom68k-rom.c (_initialize_rom68k): Add declaration.
* cpu32bug-rom.c (_initialize_cpu32bug_rom): Add declaration.
* m68k-tdep.c (_initialize_m68k_tdep): Add declaration.
* remote-est.c (_initialize_est): Add declaration.
* m68hc11-tdep.c (_initialize_m68hc11_tdep): Add declaration.
(m68hc11_call_dummy_address): Make static.
* ia64-tdep.c: Make local functions static.
(_initialize_ia64_tdep): Add declaration.
* solib-legacy.c (_initialize_svr4_lm): Add declaration.
* monitor.c (monitor_wait_filter): Make static.
(_initialize_remote_monitors): Add declaration.
* remote-hms.c (_initialize_remote_hms): Add declaration.
* remote-e7000.c (fetch_regs_from_dump): Make static.
(expect_n): Make static.
(_initialize_remote_e7000): Add declaration.
* ser-e7kpc.c: Always include "defs.h".
(_initialize_ser_e7000pc): Add declaration.
* h8300-tdep.c (_initialize_h8300_tdep): Add declaration.
* cris-tdep.c: Make all but one function static.
(_initialize_cris_tdep): Add declaration.
* solib-svr4.c (_initialize_svr4_solib): Add declaration.
* solib.c (update_solib_list): Make static.
(_initialize_solib): Add declaration.
* avr-tdep.c (avr_breakpoint_from_pc): Make static.
(_initialize_avr_tdep): Add declaration.
* remote-rdi.c (voiddummy): Make static.
(_initialize_remote_rdi): Add declaration.
* arm-tdep.c (_initialize_arm_tdep): Add declaration.
* remote-rdp.c (send_rdp): Make static.
(_initialize_remote_rdp): Add declaration.
* alpha-tdep.c (_initialize_alpha_tdep): Add declaration.
2003-06-11 13:16:30 +00:00
Andrew Cagney
123a958e01
2003-05-08 Andrew Cagney <cagney@redhat.com>
...
* regcache.h (max_register_size): Delete declaration.
* regcache.c (max_register_size): Delete function.
(struct regcache_descr): Delete field "max_register_size".
(init_regcache_descr, init_legacy_regcache_descr): Assert that all
registers fit in MAX_REGISTER_SIZE.
(regcache_save): Replace max_register_size with MAX_REGISTER_SIZE.
(regcache_restore, regcache_xfer_part, regcache_dump): Ditto.
* thread-db.c: Replace max_register_size with MAX_REGISTER_SIZE.
* sh-tdep.c, rom68k-rom.c, remote-sim.c, remote-mips.c: Ditto.
* remote-e7000.c, monitor.c, mipsv4-nat.c, mips-nat.c: Ditto.
* m68klinux-nat.c, lynx-nat.c, irix4-nat.c: Ditto.
* hpux-thread.c, hppah-nat.c, hppab-nat.c, hppa-tdep.c: Ditto.
* dve3900-rom.c, hppa-tdep.c: Ditto.
2003-05-08 22:33:14 +00:00
Andrew Cagney
0ba6dca974
2003-04-28 Andrew Cagney <cagney@redhat.com>
...
* gdbarch.sh (DEPRECATED_TARGET_READ_FP): Replace TARGET_READ_FP.
(DEPRECATED_FP_REGNUM): Replace FP_REGNUM.
* gdbarch.h, gdbarch.c: Re-generate.
* infcall.c (call_function_by_hand): Use DEPRECATED_FP_REGNUM,
DEPRECATED_TARGET_READ_FP, or "sp" to create the dummy frame ID.
* inferior.h (deprecated_read_fp): Rename read_fp.
(generic_target_read_fp): Delete declaration.
* regcache.c (generic_target_read_fp): Delete function.
(deprecated_read_fp): Replace read_fp, use
DEPRECATED_TARGET_READ_FP or DEPRECATED_FP_REGNUM.
* d10v-tdep.c (d10v_read_fp): Delete function.
(d10v_gdbarch_init): Do not set deprecated_read_fp.
* sparc-tdep.c (sparc_gdbarch_init): Do not set
deprecated_target_read_fp to generic_target_read_fp.
* sh-tdep.c (sh_gdbarch_init): Ditto.
* rs6000-tdep.c (rs6000_gdbarch_init): Ditto.
* m68hc11-tdep.c (m68hc11_gdbarch_init): Ditto.
* frv-tdep.c (frv_gdbarch_init): Ditto.
* xstormy16-tdep.c (xstormy16_gdbarch_init): Set
deprecated_fp_regnum.
* x86-64-tdep.c (x86_64_init_abi): Ditto.
* vax-tdep.c (vax_gdbarch_init): Ditto.
* v850-tdep.c (v850_gdbarch_init): Ditto.
* sparc-tdep.c (sparc_gdbarch_init): Ditto.
* sh-tdep.c (sh_gdbarch_init): Ditto.
* s390-tdep.c (s390_gdbarch_init): Ditto.
* rs6000-tdep.c (rs6000_gdbarch_init): Ditto.
* mn10300-tdep.c (mn10300_gdbarch_init): Ditto.
* mcore-tdep.c (mcore_gdbarch_init): Ditto.
* m68k-tdep.c (m68k_gdbarch_init): Ditto.
* m68hc11-tdep.c (m68hc11_gdbarch_init): Ditto.
* ia64-tdep.c (ia64_gdbarch_init): Ditto.
* i386-tdep.c (i386_gdbarch_init): Ditto.
* hppa-tdep.c (hppa_gdbarch_init): Ditto.
* h8300-tdep.c (h8300_gdbarch_init): Ditto.
* frv-tdep.c (frv_gdbarch_init): Ditto.
* cris-tdep.c (cris_gdbarch_init): Ditto.
* avr-tdep.c (avr_gdbarch_init): Ditto.
* arm-tdep.c (arm_gdbarch_init): Ditto.
* alpha-tdep.c (alpha_gdbarch_init): Ditto.
* x86-64-tdep.c (x86_64_init_abi): Set deprecated_target_read_fp.
* v850-tdep.c (v850_gdbarch_init): Ditto.
* sparc-tdep.c (sparc_gdbarch_init): Ditto.
* sh-tdep.c (sh_gdbarch_init): Ditto.
* s390-tdep.c (s390_gdbarch_init): Ditto.
* rs6000-tdep.c (rs6000_gdbarch_init): Ditto.
* mn10300-tdep.c (mn10300_gdbarch_init): Ditto.
* mips-tdep.c (mips_gdbarch_init): Ditto.
* m68hc11-tdep.c (m68hc11_gdbarch_init): Ditto.
* ia64-tdep.c (ia64_gdbarch_init): Ditto.
* hppa-tdep.c (hppa_gdbarch_init): Ditto.
* frv-tdep.c (frv_gdbarch_init): Ditto.
* avr-tdep.c (avr_gdbarch_init): Ditto.
* arm-tdep.c (arm_gdbarch_init): Ditto.
* vax-tdep.c (vax_frame_init_saved_regs): Replace FP_REGNUM with
DEPRECATED_FP_REGNUM.
(vax_push_dummy_frame, vax_pop_frame): Ditto.
* std-regs.c (value_of_builtin_frame_fp_reg): Ditto.
* sparc-tdep.c (sparc_init_extra_frame_info): Ditto.
(sparc_push_dummy_frame, sparc64_read_fp): Ditto.
(sparc32_register_virtual_type): Ditto.
* sh-tdep.c (sh64_frame_chain): Ditto.
(sh64_get_saved_register, sh64_pop_frame): Ditto.
(sh_nofp_frame_init_saved_regs): Ditto.
(sh64_nofp_frame_init_saved_regs): Ditto.
(sh_fp_frame_init_saved_regs): Ditto.
* remote-mips.c (mips_wait, mips_fetch_registers): Ditto.
* remote-e7000.c (fetch_regs_from_dump): Ditto.
* procfs.c (procfs_fetch_registers): Ditto.
(procfs_store_registers): Ditto.
* ns32knbsd-nat.c (fetch_inferior_registers): Ditto.
(store_inferior_registers, fetch_core_registers): Ditto.
(fetch_kcore_registers, clear_regs): Ditto.
* ns32k-tdep.c (ns32k_frame_init_saved_regs): Ditto.
(ns32k_push_dummy_frame, ns32k_pop_frame): Ditto.
* nlm/i386.h (DEPRECATED_FP_REGNUM): Ditto.
* nlm/i386.c (do_status): Ditto.
* mipsv4-nat.c (supply_gregset): Ditto.
* mips-tdep.c: Ditto for comments.
* mips-nat.c (fetch_inferior_registers): Ditto.
(store_inferior_registers, fetch_core_registers): Ditto.
* m68k-tdep.c (m68k_push_dummy_frame): Ditto.
(m68k_pop_frame, m68k_frame_init_saved_regs): Ditto.
* i386-tdep.c (i386_frame_init_saved_regs): Ditto.
(i386_do_pop_frame, i386_register_type): Ditto.
* hppa-tdep.c (hppa_frame_chain): Ditto.
(hppa_push_dummy_frame, find_dummy_frame_regs): Ditto.
(hppa_pop_frame, hppa_read_fp): Ditto.
(skip_prologue_hard_way, hppa_frame_find_saved_regs): Ditto.
* cris-tdep.c (cris_examine, cris_pop_frame): Ditto.
* config/vax/nm-vax.h (REGISTER_U_ADDR): Ditto.
* config/sparc/tm-sparc.h (DEPRECATED_FP_REGNUM): Ditto.
* config/sparc/tm-sp64.h (DEPRECATED_FP_REGNUM): Ditto.
* config/s390/tm-s390.h (DEPRECATED_FP_REGNUM): Ditto.
* config/pa/tm-hppa64.h (DEPRECATED_FP_REGNUM): Ditto.
* config/ia64/tm-ia64.h (DEPRECATED_FP_REGNUM): Ditto.
* blockframe.c: Ditto for comments.
* arch-utils.h: Ditto for comments.
* arch-utils.c (legacy_virtual_frame_pointer): Ditto.
* alphanbsd-tdep.c (fetch_core_registers): Ditto.
* alphabsd-nat.c (fetch_inferior_registers): Ditto.
* alpha-tdep.h: Ditto for comments.
* alpha-tdep.c (alpha_cannot_fetch_register): Ditto.
(alpha_cannot_store_register): Ditto.
(alpha_push_dummy_frame): Ditto.
* alpha-nat.c (supply_gregset): Ditto.
* config/sparc/tm-sp64.h (DEPRECATED_TARGET_READ_FP): Update.
* config/pa/tm-hppa64.h (DEPRECATED_TARGET_READ_FP): Update.
* config/sparc/tm-sparc.h: Update comment.
* hppa-tdep.c (hppa_init_extra_frame_info): Use
deprecated_read_fp instead of TARGET_READ_FP.
(hppa_init_extra_frame_info, hppa_frame_chain): Ditto.
(hppa_push_dummy_frame, hppa_read_fp): Ditto.
* sparc-tdep.c (sparc_init_extra_frame_info): Use
deprecated_read_fp instead of read_fp.
* s390-tdep.c (s390_push_arguments): Ditto.
* ia64-tdep.c (ia64_gdbarch_init): Ditto.
* frame.h: Ditto in comments.
* frame.c (legacy_get_prev_frame): Ditto.
* dummy-frame.c (dummy_frame_this_id): Ditto.
* arm-tdep.c (arm_init_extra_frame_info): Ditto.
2003-04-28 Andrew Cagney <cagney@redhat.com>
* gdbint.texinfo (Target Architecture Definition): Replace
read_fp, TARGET_READ_FP and FP_REGNUM, with deprecated_read_fp,
DEPRECATED_TARGET_READ_FP and DEPRECATED_REGNUM.
2003-04-29 01:49:49 +00:00
Fred Fish
b871e4ecc4
Checked in as obvious fixes. Also updated FSF copyright year to 2003
...
for remote-e7000.c and infttrace.c.
2003-02-05 Fred Fish <fnf@intrinsity.com>
* remote-e7000.c (e7000_drain_command): Fix precedence problem with
'=' and '!='.
* rdi-share/ardi.c (wait_for_debug_message): Fix precedence problem
with '&' and '=='.
(angel_RDI_info): Ditto.
* infttrace.c (threads_continue_all_but_one): Fix precedence problem
with '&' and '!='.
(threads_continue_all_with_signals): Ditto.
2003-02-06 17:58:01 +00:00
Andrew Cagney
6789195b42
2003-02-02 Andrew Cagney <ac131313@redhat.com>
...
* mips-nat.c (zerobuf): Delete.
(fetch_inferior_registers): Alloc local zerobuf.
(fetch_core_registers): Alloc local zerobuf.
* d10v-tdep.c (show_regs): Don't allocate a dynamic array using
MAX_REGISTER_RAW_SIZE or MAX_REGISTER_VIRTUAL_SIZE.
* thread-db.c (thread_db_store_registers): Ditto.
* sh-tdep.c (sh_do_register): Ditto.
* rom68k-rom.c (rom68k_supply_one_register): Ditto.
* remote-sim.c (gdbsim_store_register): Ditto.
* remote-mips.c (mips_wait, mips_fetch_registers): Ditto.
* remote-e7000.c (fetch_regs_from_dump): Ditto.
* monitor.c (monitor_supply_register): Ditto.
* mipsv4-nat.c (supply_gregset, supply_fpregset): Ditto.
* mips-nat.c (fetch_inferior_registers): Ditto.
* m68klinux-nat.c (fetch_register): Ditto.
* lynx-nat.c (fetch_inferior_registers): Ditto.
(fetch_inferior_registers): Ditto.
* irix4-nat.c (supply_gregset, supply_fpregset): Ditto.
* hpux-thread.c (hpux_thread_fetch_registers): Ditto.
(hpux_thread_store_registers): Ditto.
* hppah-nat.c (fetch_register): Ditto.
* hppab-nat.c (fetch_register): Ditto.
* hppa-tdep.c (pa_register_look_aside): Ditto.
(pa_print_fp_reg, pa_strcat_fp_reg): Ditto.
* dve3900-rom.c (fetch_bitmapped_register): Ditto.
2003-02-02 05:46:14 +00:00
Andrew Cagney
a193e39718
2002-11-29 Andrew Cagney <cagney@redhat.com>
...
* remote-mips.c (mips_initialize): Force a selected frame rebuild
by calling get_selected_frame.
* ocd.c (ocd_start_remote): Use get_selected frame instead of
set_current_frame, create_new_frame, select_frame and
get_current_frame.
* remote-e7000.c (e7000_start_remote): Ditto.
* remote-mips.c (common_open): Ditto
* remote-rdp.c (remote_rdp_open): Ditto.
2002-11-29 19:40:30 +00:00
Andrew Cagney
6e7f8b9cba
2002-11-29 Andrew Cagney <ac131313@redhat.com>
...
* stack.c (selected_frame, select_frame): Move from here ...
* frame.c (selected_frame, select_frame): ... to here. Include
"language.h".
* Makefile.in (frame.o): Update dependencies.
* frame.c (get_selected_frame): New function.
* frame.h (get_selected_frame): Declare.
(deprecated_selected_frame): Rename selected_frame.
* ada-lang.c, ada-tasks.c, breakpoint.c, corelow.c: Update.
* eval.c, f-valprint.c, findvar.c, frame.c, frame.h: Update.
* h8300-tdep.c, h8500-tdep.c, hppa-tdep.c, infcmd.c: Update.
* inflow.c, infrun.c, macroscope.c, mips-tdep.c: Update.
* mn10300-tdep.c, ocd.c, regcache.h, remote-e7000.c: Update.
* remote-mips.c, remote-rdp.c, sh-tdep.c, sparc-tdep.c: Update.
* stack.c, thread.c, tracepoint.c, valops.c, varobj.c: Update.
* z8k-tdep.c, cli/cli-cmds.c: Update.
Index: mi/ChangeLog
2002-11-29 Andrew Cagney <ac131313@redhat.com>
* mi/mi-cmd-stack.c, mi/mi-main.c: Update to use
deprecated_selected_frame.
Index: tui/ChangeLog
2002-11-29 Andrew Cagney <ac131313@redhat.com>
* tui/tui-hooks.c: Update to use deprecated_selected_frame.
* tui/tui.c, tui/tuiDisassem.c, tui/tuiRegs.c: Ditto.
* tui/tuiSource.c, tui/tuiSourceWin.c, tui/tuiWin.c: Ditto.
2002-11-29 19:15:16 +00:00
Daniel Jacobowitz
0f3fafde68
* gnu-nat.c (init_gnu_ops): Remove NULL initializations.
...
* monitor.c (init_base_monitor_ops): Likewise.
* ppc-bdm.c (init_bdm_ppc_ops): Likewise.
* remote-array.c (init_array_ops): Likewise.
* remote-e7000.c (init_e7000_ops): Likewise.
* remote-es.c (init_es1800_ops): Likewise.
(init_es1800_child_ops): Likewise.
* remote-rdp.c (init_remote_rdp_ops): Likewise.
* remote-sim.c (init_gdbsim_ops): Likewise.
* remote-st.c (init_st2000_ops): Likewise.
* sol-thread.c (init_sol_core_ops): Likewise.
(init_sol_thread_ops): Likewise.
* v850ice.c (init_850ice_ops): Likewise.
* win32-nat.c (init_child_ops): Likewise.
* wince.c (init_child_ops): Likewise.
2002-11-12 21:43:55 +00:00
Andrew Cagney
0f7d239c5a
* frame.h (select_frame): Delete level parameter.
...
* stack.c (select_frame): Update. Use frame_relative_level to
obtain the frame's level.
(select_and_print_frame): Update call.
(select_frame_command): Ditto.
(up_silently_base): Ditto.
(down_silently_base): Ditto.
* ocd.c (ocd_start_remote): Ditto.
* remote-rdp.c (remote_rdp_open): Ditto.
* remote-mips.c (mips_initialize): Ditto.
(common_open): Ditto.
* remote-e7000.c (e7000_start_remote): Ditto.
* m3-nat.c (select_thread): Ditto.
* hppa-tdep.c (child_get_current_exception_event): Ditto.
(child_get_current_exception_event): Ditto.
* varobj.c (varobj_create): Ditto.
(varobj_update): Ditto.
(c_value_of_root): Ditto.
* tracepoint.c (finish_tfind_command): Ditto.
* corelow.c (core_open): Ditto.
* arch-utils.c (generic_prepare_to_proceed): Ditto.
* thread.c (info_threads_command): Ditto.
(switch_to_thread): Ditto.
* infrun.c (normal_stop): Ditto.
(restore_selected_frame): Ditto.
(restore_inferior_status): Ditto.
* breakpoint.c (insert_breakpoints): Ditto.
(watchpoint_check): Ditto.
(bpstat_stop_status): Ditto.
(do_enable_breakpoint): Ditto.
* blockframe.c (flush_cached_frames): Ditto.
(reinit_frame_cache): Ditto.
2002-05-05 01:15:13 +00:00
Elena Zannoni
7aa83cacfa
2002-04-07 Elena Zannoni <ezannoni@redhat.com>
...
* remote-e7000.c (write_small, e7000_read_inferior_memory,
e7000_read_inferior_memory_large, e7000_insert_breakpoint,
e7000_remove_breakpoint): Use paddr_nz() to print addresses.
2002-04-07 23:32:40 +00:00
Andrew Cagney
0a65a603d3
Remove ATTRIBUTE_UNUSED. Update (C).
2002-01-19 03:32:43 +00:00
Andrew Cagney
2cd58942b9
* serial.h (SERIAL_ASYNC): Delete.
...
(DEPRECATED_SERIAL_FD): Delete.
(SERIAL_DEBUG): Delete.
(SERIAL_DEBUG_P): Delete.
(SERIAL_DRAIN_OUTPUT): Delete.
(SERIAL_FLUSH_OUTPUT): Delete.
(SERIAL_FLUSH_INPUT): Delete.
(SERIAL_SEND_BREAK): Delete.
(SERIAL_RAW): Delete.
(SERIAL_GET_TTY_STATE): Delete.
(SERIAL_SET_TTY_STATE): Delete.
(SERIAL_PRINT_TTY_STATE): Delete.
(SERIAL_NOFLUSH_SET_TTY_STATE): Delete.
(SERIAL_SETBAUDRATE): Delete.
(SERIAL_SETSTOPBITS): Delete.
(SERIAL_CAN_ASYNC_P): Delete.
(SERIAL_IS_ASYNC_P): Delete.
(SERIAL_UN_FDOPEN): Delete.
(SERIAL_READCHAR): Delete.
(SERIAL_CLOSE): Delete.
(SERIAL_FDOPEN): Delete.
(SERIAL_OPEN): Delete.
2001-07-15 20:34:14 +00:00
Elena Zannoni
4902674b93
2001-07-13 Elena Zannoni <ezannoni@redhat.com>
...
* remote-e7000.c (fetch_regs_from_dump): If register set is null,
generate an internal error.
(e7000_fetch_registers): Initialize variable 'wanted'.
(e7000_wait): Initialize variable 'wanted_nopc'.
(e7000_store_register): Fix sprintf compiler warnings.
(sub2_from_pc): Ditto.
(e7000_open): Close the descriptor, not the name.
(e7000_load): Fix compiler warnings.
(sub2_from_pc): Ditto.
* Makefile.in (remote-e7000.o): Can now compile with -Werror.
2001-07-13 20:03:52 +00:00
Andrew Cagney
819cc32466
s/typedef serial_t/struct serial */
2001-07-11 17:52:32 +00:00
Christopher Faylor
0b6a968ee6
* gnu-regex.c: Eliminate obsolete check for _MSC_VER.
...
* utils.c (notice_quit): Remove dummy function only used for _MSC_VER.
* values.c (unpack_double): Remove obsolete check for _MSC_VER.
* defs.h: Ditto.
* m32r-rom.c: Ditto.
* p-exp.y: Ditto.
* ser-e7kpc.c: Ditto. Define WIN32_LEAN_AND_MEAN under _WIN32, for faster
compilation.
(get_ds_base): Remove _MSC_VER version of this function.
* nindy-share/ttyflush.c: Ditto. X
* rdi-share/host.h: Ditto. X
* ser-go32.c (dos_readchar): Remove call to obsolete function.
* remote-sim.c (gdb_os_poll_quit): Ditto.
* remote-e7000.c (expect): Remove obsolete #if 0'ed code.
* main.c (captured_main): Eliminate special Cygwin checks.
* ser-tcp.c: Remove unneeded __CYGWIN__ guard against system include.
2001-06-10 16:25:51 +00:00
Fernando Nasser
67dd5ca691
2001-05-12 Fernando Nasser <fnasser@redhat.com>
...
* remote-e7000.c (e7000_open): Check for bad baud rate.
* remote-st.c (st2000_open): Ditto.
2001-05-12 21:05:59 +00:00
Kevin Buettner
39f770628a
Phase 1 of the ptid_t changes.
2001-05-04 04:15:33 +00:00
J.T. Conklin
46c6cdcf5e
* target.h (target_ops): Removed to_core_file_to_sym_file vector
...
function.
* corelow.c (core_ops): Updated for above change.
* gnu-nat.c (core_ops): Likewise.
* inftarg.c (child_ops): Likewise.
* monitor.c (monitor_ops): Likewise.
* ppc-bdm.c (bdm_ppc_ops): Likewise.
* remote-adapt.c (adapt_ops): Likewise.
* remote-bug.c (bug_ops): Likewise.
* remote-e7000.c (e7000_ops): Likewise.
* remote-eb.c (eb_ops): Likewise.
* remote-es.c (es1800_ops, es1800_child_ops): Likewise.
* remote-mm.c (mm_ops): Likewise.
* remote-nindy.c (nindy_ops): Likewise.
* remote-nrom.c (nrom_ops): Likewise.
* remote-os9k.c (rombug_ops): Likewise.
* remote-rdp.c (remote_rdp_ops): Likewise.
* remote-sim.c (gdbsim_ops): Likewise.
* remote-st.c (st2000_ops): Likewise.
* v850ice.c (v850ice_ops): Likewise.
* target.c (cleanup_target): Likewise
(update_current_target): Likewise.
(setup_target_debug): Likewise
(debug_to_core_file_to_sym_file): Removed.
* corefile.c (core_file_command) [HPUXHPPA]: Removed code that
sets symbol file from information obtained from the core file.
* corelow.c (core_file_to_sym_file): Removed.
2001-04-14 19:23:02 +00:00
Christopher Faylor
608506ed67
* main.c: Remove windows.h use.
...
(gdbtk_test): Use PATH_MAX for home var calculation.
* remote-e7000.c (e7000_parse_device): Accomodate Cygwin as well as Win32 in
test.
* ser-tcp.c: Use modern __CYGWIN__ conditional.
* source.c (mod_path): Add __CYGWIN__ conditional to WIN32 test.
(openp): Ditto.
* symfile.c (symfile_bfd_open): Ditto.
* gdbtk/generic/gdbtk.c: Ditto.
2001-04-05 02:02:13 +00:00
Kevin Buettner
b6ba6518e9
Update/correct copyright notices.
2001-03-06 08:22:02 +00:00
Andrew Cagney
4e052eda91
Create new file regcache.h. Update all uses.
2001-03-01 01:39:22 +00:00
Kevin Buettner
e1e9e218c1
Replace calls to abort() with calls to internal_error().
2001-02-25 04:45:12 +00:00
J.T. Conklin
86ddecc5fc
* ppc-bdm.c (#include <signal.h>): Removed.
...
* remote-array.c: Likewise.
* remote-bug.c: Likewise.
* remote-e7000.c: Likewise.
* remote-mips.c: Likewise.
* remote-os9k.c: Likewise.
* remote-st.c: Likewise.
* remote-udi.c: Likewise.
* remote-vx29k.c: Likewise.
* remote-vx68.c: Likewise.
* remote-vx960.c: Likewise.
* remote-vxmips.c: Likewise.
* remote-vxsparc.c: Likewise.
2001-02-02 23:04:14 +00:00
J.T. Conklin
824670030b
* monitor.c (#include "gdb_wait.h"): Removed.
...
* ocd.c: Likewise.
* ppc-bdm.c: Likewise.
* remote-adapt.c: Likewise.
* remote-array.c: Likewise.
* remote-bug.c: Likewise.
* remote-e7000.c: Likewise.
* remote-eb.c: Likewise.
* remote-es.c: Likewise.
* remote-mips.c: Likewise.
* remote-mm.c: Likewise.
* remote-nindy.c: Likewise.
* remote-os9k.c: Likewise.
* remote-rdi.c: Likewise.
* remote-rdp.c: Likewise.
* remote-sds.c: Likewise.
* remote-sim.c: Likewise.
* remote-st.c: Likewise.
* remote-udi.c: Likewise.
* remote-vx.c: Likewise.
* remote-vx29k.c: Likewise.
* remote-vx68.c: Likewise.
* remote-vx960.c: Likewise.
* remote-vxmips.c: Likewise.
* remote-vxsparc.c: Likewise.
* remote.c: Likewise.
* ser-pipe.c: Likewise.
* ser-unix.c: Likewise.
* Makefile.in: Updated dependencies.
-------------------------------------------------------------------
2001-02-02 19:14:33 +00:00
J.T. Conklin
29e5738069
* exec.c (xfer_memory): Add attrib argument.
...
* infptrace.c (child_xfer_memory): Likewise.
* monitor.c (monitor_xfer_memory): Likewise.
* remote-adapt.c (adapt_xfer_inferior_memory): Likewise.
* remote-array.c (array_xfer_memory): Likewise.
* remote-bug.c (bug_xfer_memory): Likewise.
* remote-e7000.c (e7000_xfer_inferior_memory): Likewise.
* remote-eb.c (eb_xfer_inferior_memory): Likewise.
* remote-es.c (es1800_xfer_inferior_memory): Likewise.
* remote-mips.c (mips_xfer_memory): Likewise.
* remote-mm.c (mm_xfer_inferior_memory): Likewise.
* remote-nindy.c (nindy_xfer_inferior_memory): Likewise.
* remote-os9k.c (rombug_xfer_inferior_memory): Likewise.
* remote-rdi.c (arm_rdi_xfer_memory): Likewise.
* remote-rdp.c (remote_rdp_xfer_inferior_memory): Likewise.
* remote-sds.c (sds_xfer_memory): Likewise.
* remote-sim.c (gdbsim_xfer_inferior_memory): Likewise.
* remote-st.c (st2000_xfer_inferior_memory): Likewise.
* remote-udi.c (udi_xfer_inferior_memory): Likewise.
* remote-vx.c (vx_xfer_memory): Likewise.
* remote.c (remote_xfer_memory): Likewise.
* target.c (debug_to_xfer_memory, do_xfer_memory): Likewise.
* target.h (child_xfer_memory, do_xfer_memory, xfer_memory): Likewise.
* target.h (#include "memattr.h"): Added.
(target_ops.to_xfer_memory): Add attrib argument.
* wince.c (_initialize_inftarg): Removed call to set_dcache_state.
* dcache.h (set_dcache_state): Removed declaration.
* dcache.c (set_dcache_state): Removed definition
* dcache.c: Update module comment, as dcache is now enabled and
disabled with memory region attributes instead of by the global
variable "remotecache". Add comment describing the interaction
between dcache and memory region attributes.
(dcache_xfer_memory): Add comment describing benefits of moving
cache writeback to a higher level.
(dcache_struct): Removed cache_has_stuff field. This was used to
record whether the cache had been accessed in order to invalidate
it when it was disabled. However, this is not needed because the
cache is write through and the code that enables, disables, and
deletes memory regions invalidate the cache. Add comment which
suggests that we could be more selective and only invalidate those
cache lines containing data from those memory regions.
(dcache_invalidate): Updated.
(dcache_xfer_memory): Updated.
(dcache_alloc): Don't abort() if dcache_enabled_p is clear.
(dcache_xfer_memory): Removed code that called do_xfer_memory() to
perform a uncached transfer if dcache_enabled_p was clear. This
function is now only called if caching is enabled for the memory
region.
(dcache_info): Always print cache info.
* target.c (do_xfer_memory): Add attrib argument.
(target_xfer_memory, target_xfer_memory_partial): Break transfer
into chunks defined by memory regions, pass region attributes to
do_xfer_memory().
* dcache.c (dcache_read_line, dcache_write_line): Likewise.
* Makefile.in (SFILES): Add memattr.c.
(COMMON_OBS): Add memattr.o.
(dcache.o): Add target.h to dependencies.
* memattr.c: New file.
* memattr.h: Likewise.
2001-01-23 22:48:56 +00:00
Andrew Cagney
55d8016036
* ser-e7kpc.c (e7000pc_setstopbits): New function.
...
(e7000pc_ops): Add e7000pc_setstopbits.
* remote-e7000.c (e7000_detach, e7000_resume,
e7000_xfer_inferior_memory, e7000_files_info, e7000_files_info,
e7000_insert_breakpoint, e7000_remove_breakpoint, e7000_kill):
Update function signature to match target vector.
* h8300-tdep.c (h8300_command, h8300h_command, h8300s_command):
h8500-tdep.c (small_command, big_command, medium_command,
compact_command): Update function signature to match add_cmd.
2000-12-02 11:37:15 +00:00
J.T. Conklin
8e1a459b89
* gdbarch.sh, hp-psymtab-read.c, hpread.c, m3-nat.c, mcore-tdep.c,
...
mips-tdep.c, monitor.c, regcache.c, remote-es.c, ser-unix.c,
somread.c, tracepoint.c: Fix spelling errors in comments.
* gdbarch.c: Regenerate.
* gnu-nat.c (S_exception_raise_request): Fix typos and spelling
errors in strings.
* m3-nat.c (intercept_exec_calls, mach_thread_parse_id): Likewise.
* mcore-tdep.c (mcore_analyze_prologue): Likewise.
* mips-tdep.c (mips16_next_pc, _initialize_mips_tdep): Likewise.
* remote-e7000.c (e7000_start_remote): Likewise.
* remote-rdp.c (handle_swi): Likewise.
* remote-vx.c (vx_load_command): Likewise.
* sh-tdep.c (sh_do_pseudo_register): Likewise.
* sol-thread.c (td_err_string): Likewise.
* symtab.c (decode_line_2): Likewise.
-------------------------------------------------------------------
2000-10-30 21:50:58 +00:00
Kevin Buettner
69dc947abb
Protoization.
2000-10-03 22:42:32 +00:00
J.T. Conklin
8edbea78dc
* dcache.c (dcache_info): Output a cache line's state vector so it
...
lines up under the data vector.
* dcache.c (dcache_read_line): New function.
(dcache_peek_byte): Use it.
(dcache_alloc): Return NULL if write of reclaimed cache line fails.
(dcache_peek_byte, dcache_poke_byte): Return failure if
dcache_alloc() returns a NULL data block pointer.
(dcache_xfer_memory): Don't force writeback unless we were writing.
* monitor.c (monitor_expect): Change places where immediate_quit
is set to 1 or 0 to increments and decrements respectively. This
allows such changes to nest properly.
* ocd.c (ocd_start_remote): Likewise.
* remote-adapt.c (expect): Likewise.
* remote-array.c (expect): Likewise.
* remote-eb.c (expect): Likewise.
* remote-e7000.c (e7000_start_remote): Likewise.
* remote-mips.c (mips_expect_timeout, mips_getstring): Likewise.
* remote-nrom.c (expect): Likewise.
* remote-os9k.c (expect): Likewise.
* remote-sds.c (sds_start_remote): Likewise.
* remote-st.c (expect): Likewise.
* remote-utils.c (sr_expect): Likewise.
* remote.c (remote_start_remote): Likewise.
* tracepoint.c (read_actions): Likewise.
* remote-mips.c (mips_getstring): Balance changes to immediate_quit.
2000-09-01 00:12:10 +00:00
Elena Zannoni
34e9d9bbe1
2000-07-31 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
...
* sh-tdep.c (sh_push_arguments): Make header match prototype.
* remote-e7000.c (e7000_start_remote): Use void *, not char * as
parameter to avoid compiler warning.
(fetch_regs_from_dump): Call get_hex() with the correct number of
parameters.
2000-07-31 16:25:36 +00:00
Kevin Buettner
fba45db2fa
Protoization.
2000-07-30 01:48:28 +00:00
Elena Zannoni
cc17453a58
2000-07-19 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
...
Multiarch the sh target.
* sh-tdep.c:
(sh_generic_reg_names, sh_reg_names,sh3_reg_names, sh3e_reg_names,
sh_dsp_reg_names, sh3_dsp_reg_names, sh_processor_type_table):
Remove.
(XMALLOC): Define.
(struct frame_extra_info): Define.
(sh_register_raw_size, sh_register_virtual_size,
sh_register_virtual_type, sh_register_byte, sh_breakpoint_from_pc,
sh_frame_saved_pc, sh_skip_prologue,
sh_nofp_frame_init_saved_regs, sh_fp_frame_init_saved_regs,
sh_extract_struct_value_address, sh_use_struct_convention,
sh_store_struct_return, sh_push_arguments, sh_push_return_address,
sh_saved_pc_after_call, sh_generic_register_name,
sh_sh_register_name, sh_sh3_register_name, sh_sh3e_register_name,
sh_sh_dsp_register_name, sh_sh3_dsp_register_name,
sh_frame_args_address, sh_frame_locals_address,
sh_coerce_float_to_double, sh_default_store_return_value,
sh3e_sh4_store_return_value, sh_generic_show_regs,
sh3_show_regs,sh3e_show_regs, sh3_dsp_show_regs, sh4_show_regs,
sh_dsp_show_regs, sh_register_byte, sh_register_raw_size,
sh_register_virtual_size, sh_sh3e_register_virtual_type,
sh_default_register_virtual_type, sh_gdbarch_init): New functions.
(sh_target_architecture_hook, sh_frame_find_saved_regs,
sh_show_regs): Delete functions.
(sh_frame_chain, sh_find_callers_reg, sh_init_extra_frame_info,
sh_pop_frame, sh_extract_return_value): Update
* config/sh/tm-sh.h (GDB_MULTI_ARCH): Define to 1.
(struct gdbarch_tdep): Define.
Remove all unnecessary defines.
* remote-e7000.c ({PR,GBR,SR,MACL,VBR,MACH}_REGNUM): Define to -1,
for h8300 case.
(want_sh,want_nopc_sh,want_nopc_sh3): Make nomenclature
consistent.
(e7000_fetch_registers): Remove ifdef GDB_TARGET_IS_SH, use
runtime check instead.
(e7000_wait): Ditto.
* sh3-rom.c (sh3_supply_register): Use gdbarch_tdep to get the SSR
and SPC register numbers.
(sh3_regnames, sh3e_regnames): Don't specify a size.
* config/h8300/tm-h8300.h: Add comment.
2000-07-19 14:11:42 +00:00
Kevin Buettner
a14ed312fd
PARAMS removal.
2000-05-28 01:12:42 +00:00
Andrew Cagney
5c65bbb629
Cleanup bfd_close() cleanups.
2000-05-16 02:43:39 +00:00
Andrew Cagney
03f2053f96
Replace ../include/wait.h with gdb_wait.h.
2000-02-09 08:52:47 +00:00
Jason Molenda
c5aa993b1f
import gdb-1999-07-07 post reformat
1999-07-07 20:19:36 +00:00
Stan Shebs
7a292a7adf
import gdb-19990422 snapshot
1999-04-26 18:34:20 +00:00
Stan Shebs
c906108c21
Initial creation of sourceware repository
1999-04-16 01:35:26 +00:00
Stan Shebs
071ea11e85
Initial creation of sourceware repository
1999-04-16 01:34:07 +00:00
David Taylor
4ef1f46773
hp merge changes -- too numerous to mention here; see ChangeLog and
...
ChangeLog-gdbtk for details.
1998-12-28 23:06:13 +00:00
Andrew Cagney
aaa3c096db
CARP:
...
Re-do TARGET_PRINT_INSN_INFO, TARGET_PRINT_INSN, TARGET_ARCHITECTURE,
TARGET_ARCHITECTURE_AUTO, TARGET_BYTE_ORDER_SELECTABLE_P,
TARGET_BYTE_ORDER so that they can all be overriden.
Document.
Convert mn10300 and PPC targets.
1998-12-13 23:28:46 +00:00