Commit Graph

17 Commits

Author SHA1 Message Date
Mark Alexander
ce8f5b49f6 * sh-stub.c (undoSStep): Improve comment.
* sparc-tdep.c (sparc_extract_struct_value_address): Simplify to use
	same method on both 32-bit and 64-bit machines.
	* sparcl-tdep.c (sparclite_check_watch_resources): Simulator doesn't
	support hardware breakpoints.
	* config/sparc/tm-sparc.h (CALL_DUMMY): Improve comments.
1998-08-24 21:51:33 +00:00
John Metzler
c719b71428 Thu May 21 13:14:25 1998 John Metzler <jmetzler@cygnus.com>
* gnu-nat.c (init_gnu_ops): Initialization of target ops by assignment.
	(_initialize_gnu_nat):      Call new init
	* mac-nat.c (init_child_ops):          Ditto
	(_initialize_mac_nat):                 Ditto
	* monitor.c (init_base_monitor_ops):   Ditto
	(_initialize_remote_monitors) :        Ditto
	* ppc-bdm.c (init_bdm_ppc_ops):        Ditto
	(_initialize_bdm_ppc):                 Ditto
	* remote-adapt.c ( init_adapt_ops):    Ditto
	(_initialize_remote_adapt):            Ditto
	* remote-array.c (init_array_ops) :    Ditto
	(_initialize_array):                   Ditto
	* remote-bug (init_bug_ops) :          Ditto
	(_initialize_remote_bug):              Ditto
	* remote-e7000.c (init_e7000_ops):     Ditto
	(_initialize_remote_e7000) :           Ditto
	* remote-eb.c (init_eb_ops) :          Ditto
	(_initialize_remote_eb) :              Ditto
	*remote-es.c (init_es1800_ops) :       Ditto
	(init_es1800_child_ops) :              Ditto
	(_initialize_es1800) ;                 Ditto
	*remote-hms.c (init_hms_ops):          Ditto
	(_initialize_remote_hms) :             Ditto
	* remote-mm.c (init_mm_ops):           Ditto
	(_initialize_remote_mm) :              Ditto
	* remote-nindy.c (init_nindy_ops):     Ditto
	(_initialize_nindy):                   Ditto
	* remote_nrom.c (init_nrom_ops) :      Ditto
	(_initialize_remote_nrom) :            Ditto
	*remote-os9k (init_rombug_ops) :       Ditto
	(_initialize_remote_os9k) :            Ditto
	*remote-rdi.c (init_rdi_ops) :         Ditto
	(_initialize_remote_rdi) :             Ditto
	* remote-rdp.c (init_remote_rdp_ops) : Ditto
	(_initialize_remote_rdp) :             Ditto
	* remote-sds.c (init_sds_ops) :        Ditto
	(_initialize_remote_sds) :             Ditto
	* remote-sim.c (init_gdbsim_ops) :     Ditto
	(_initialize_remote_sim) :             Ditto
	* remote-st.c (init_st2000_ops):       Ditto
	(_initialize_remote_st2000):           Ditto
	*remote-udi.c (init_udi_ops) :         Ditto
	(_initialize_remote_udi) :             Ditto
	* remote-vx.c (init_vx_ops) :          Ditto
	(init_vx_run_ops) :                    Ditto
	(_initialize_vx) :                     Ditto
	* remote.c (init_remote_ops):          Ditto
	(init_extended_remote_ops):            Ditto
	(_initialize_remote):                  Ditto
	* sparcl-tdep.c (init_sparclite_ops):  Ditto
	(_initialize_sparcl_tdep):             Ditto
	* v850ice.c (init_850ice_ops):         Ditto
	(_initialize_v850ice):                 Ditto
	*win32-nat.c: (init_child_ops):        Ditto
	(_initialize_inftarg):                 Ditto
1998-05-21 20:20:39 +00:00
Mark Alexander
e50f526e68 * sparc-tdep.c (sparc_extract_struct_value_address): Make it
work correctly on little-endian hosts.
	(sparc_push_arguments): New function.
	(gdb_print_insn_sparc): New function.
	(_initialize_sparc_tdep): Make gdb_print_insn_sparc the default
	disassembler, so that SPARClite-specific instructions will
	be recognized.
	* sparcl-tdep.c (readchar): Print debugging information.
	(debug_serial_write): New function, a replacement for SERIAL_WRITE
	that prints debugging information.
	* config/sparc/tm-sparc.h (PUSH_ARGUMENTS): Define.
	(sparc_push_arguments): Declare.
1998-04-15 00:25:58 +00:00
Michael Snyder
d6acae6881 Thu Mar 5 16:07:41 1998 Michael Snyder (msnyder@cleaver.cygnus.com)
* sparcl-tdep.c: fix #endif comments
1998-03-06 00:09:31 +00:00
Stu Grossman
8501c74270 * defs.h: Define CONST_PTR as blank if compiling with Microsoft
C, else it's `const'.
	* c-lang.c c-lang.h ch-lang.c f-lang.c language.c m2-lang.c
	scm-lang.c: Microsoft C can't hack const pointers.  Use CONST_PTR
	macro instead.
	* configure configure.in defs.h:  Use AC_C_CONST to figure out if
	the compiler supports const.  Gets rid of some cruft in defs.h.
	* dwarf2read.c:  <string.h> -> "gdb_string.h"
	* remote-sim.c:  Add prototypes.  Fix call to gdbsim_kill.
	* sparcl-tdep.c (download):  Add prototypes to write_routine and
	start_routine args.

	* mswin/gdbwin.c:  Don't include both varargs.h AND stdarg.h.  Get
	rid of varargs.h  Include string.h.
	* (gdbwin_update gdbwin_fputs regs_changed_f bpt_changed_f
	update):  Fix prototypes, fix calls.
	* (update):  Return value for catch_errors.
	* (run_execute_command togdb_command_from_tty togdb_command):
	Cleanup catching of errors from calls to execute_command.  Also,
	dup command string to avoid modifying const strings.
	* (togdb_breakinfo_i_init togdb_breakinfo_i_next):  Use 0 instead
	of NULL when see if b->address isn't set.
	* (bi_disable_bpt bi_enable_bpt bi_delete_all
	bi_delete_breakpoint):  Add arg to calls to update.
	* (gui_command):  Add prototype.
	* (mswin_query):  Fix prototype.
	* (_initialize_gdbwin):  Dup string to avoid modifying const.
	* (info_path togdb_get_info_path):  Remove const from decls cuz
	this can't be const (it points at malloc'ed memory).
	* (togdb_searchpath):  Remove const from path.  Dup string to
	avoid modifying const strings.
	* rindex -> strrchr.
	* (gdbwin_list_symbols):  Regexp param is const.
	* Fix lots of refs to psymtabs to deref correct pointers.
	* (togdb_set_breakpoint_sal):  Call set_breakpoint_sal with sal,
	not &sal.
	* mswin/gdbwin.h (togdb_searchpath togdb_get_info_path
	toget_set_info_path):  Fix prototypes to match reality.
	* mswin/gui.cpp:  Define _beginthreadex and _endthreadex routines
	with proper prototypes.
	* mswin/iface.cpp (gdbwin_fputs):  Define with correct number of args.
	* mswin/ser-win32s.c:  Fix defs of min and max.
	* mswin/serdll32.c (OpenComm16):  Make cbInQueue and cbOutQueue be
	USHORT.
	* (WriteComm16):  Change lpBug from LPVOID to LPCSTR.
	* mswin/serdll32.h:  Fix prototypes for OpenComm16 and WriteComm16.
1996-08-13 00:01:37 +00:00
Stu Grossman
9e77e83d30 * dwarf2read.c dwarfread.c exec.c infcmd.c infrun.c main.c
mdebugread.c os9kread.c source.c top.c utils.c:  Don't
	include param.h or sys/file.h (or unistd.h in some cases).
	* defs.h exec.c inflow.c remote-array.c remote-e7000.c
	sparcl-tdep.c terminal.h utils.c:  Replace all occurances of
	__WIN32__, WINGDB, WIN32, etc... with _WIN32.
	* main.c:  Remove #ifndef WINGDB around option processing.  Fix
	bug with passing argc==0 and argv==NULL to getopt.
	* (main) Remove calls to access() before source_command.  Let
	soure_command handle access errors.
	* maint.c (maintenance_dump_me):  #ifdef out for _WIN32.
	* symtab.c (operator_chars):  Make this global for wingdb.
	* top.c (disconnect):  #ifdef out for _WIN32.
	* (source_command):  If got an error and from_tty, then call print
	error, else just return quietly.
	* utils.c (fatal_dump_core):  Can't kill ourselves under windows.
	Just exit.
	* (pollquit notice_quit):  #ifdef out stuff that doesn't exist
	under windows.
1996-08-08 02:50:22 +00:00
Stu Grossman
2f4973f852 Update copyrights. Add copyright notice to configure.in. 1996-01-05 17:11:45 +00:00
Stu Grossman
0fe1522ad0 * breakpoint.c (remove_breakpoint): Change error to warning so
that hardware watchpoint removal problems won't leave breakpoint
	traps in the target.
	* configure configure.in:  Make --enable-gdbtk be the default.
	* remote-e7000.c (e7000_insert_breakpoint,
	e7000_remove_breakpoint):  Use e7000 based breakpoints, not memory
	breakpoints.
	* (e7000_wait):  Adjust PC back by two when we see a breakpoint to
	compensate for e7000 maladjustment.
	* sparcl-tdep.c (sparclite_check_watch_resources):  Fix logic bug
	which prevented hardware watchpoints from working.
1996-01-05 00:42:36 +00:00
Stu Grossman
934ec87c6b * sparcl-tdep.c: Cleanup serial error handling. 1995-10-16 18:41:17 +00:00
Fred Fish
6c9638b444 Update FSF address. 1995-08-02 03:41:12 +00:00
Jeff Law
43fc25c87e * inftarg.c (child_thread_alive): New function to see if a
particular thread is still running.
        (child_ops): Add child_thread_alive entry.
        * remote.c (remote_thread_alive): New function to see if a
        particular thread is still alive.
        (remote_ops): Add remote_thread_alive.
        * target.c (dummy_target): Add dummy entry for thread_alive.
        (cleanup_target): de_fault thread_alive too.
        (update_current_target): INHERIT thread_alive too.
        (debug_to_thread_alive): New function.
        (setup_target_debug): Add debug_to_thread_alive.
        * target.h (struct target_ops): Add to_thread_alive.
        (target_thread_alive): Define.
        * thread.c (info_threads_command): Don't call kill; use
        target_thread_alive instead.
        * config/nm-lynx.h (CHILD_THREAD_ALIVE): Define.
        * gdbserver/low-lynx.c (mythread_alive): New function.
        (mywait): Don't restart any threads after a new thread notification,
        let the generic code handle it.
        * gdbserver/low-sparc.c (mythread_alive): Dummy version.
        * gdbserver/low-sun3.c (mythread_alive): Likewise.
        * gdbserver/server.c (main): Handle thread_alive requests.
        * gdbserver/server.h (mythread_alive): Declare.
        * corelow.c (core_ops): Add dummy entry for thread_alive.
        * exec.c (exec_ops): Likewise.
        * m3-nat.c (m3_ops): Likewise.
        * monitor.c (monitor_ops): Likewise.
        * procfs.c (procfs_ops): Likewise.
        * remote-arc.c (arc_ops): Likewise.
        * remote-array.c (array_ops): Likewise.
        * remote-e7000.c (e7000_ops): Likewise.
        * remote-es.c (es1800_ops, es1800_child_ops): Likewise.
        * remote-mips.c (mips_ops): Likewise.
        * remote-pa.c (remote_hppro_ops): Likewise.
        * remote-sim.c (gdbsim_ops): Likewise.
        * sparcl-tdep.c (sparclite_ops): Likewise.

More lynx-6100 work
1995-07-13 21:40:22 +00:00
Steve Chamberlain
45993f6118 Hmm.. The ChangeLog went in, but not the code....
* monitor.c: Turn on caching.
	(monitor_printf): If a ^C was sent, don't expect to see its
	echo.
	(monitor_open): Enable caching.
	(monitor_resume, monitor_load): Flush cache.
	(monitor_xfer_memory): Call cache routine.
	(monitor_dump_regs): New.
	(monitor_fetch_registers):  If monitor_dump_regs available
	then use it.
	(monitor_load): Don't ref exec_bfd if it's NULL.
	(monitor_load_srec): Use new monitor_make_srec calling convention.
	(monitor_make_srec): Rewrite to cope with two, three and four byte
	addresses.
	* remote-hms.c (hms_cmds): Initialze end-of-command delim.
	* dcache.h, dcache.h: Rewritten.
	* remote.c: Reenable caching.
	(getpkt): Reduce MAX_TRIES to 3.
	(remote_xfer_memory): Use dcache_xfer_memory.
	* defs.h (error_hook): New.
	* top.c (error_hook): New definition.
	* utils.c (error): Use error_hook if initialized.
	* sparcl-tdep.c (HAVE_SOCKETS): Don't define if GO32 or WIN32. Use
	HAVE_SOCKETS in place of #ifndef GO32.
1995-06-21 21:47:06 +00:00
Stu Grossman
4887063b3c * defs.h maint.c monitor.c remote-mips.c remote.c: Add support
for `watchdog' variable.  This allows the user to put an upper
	limit on the amount of time that GDB will wait for the target to
	return from a step or continue operation.  This will primarily be
	used for the testsuite, where it is difficult to come up with a
	reasonable timeout for things like function calls, which can take
	as long as three minutes under some circumstances.  If the
	watchdog timer expires, GDB will generate an error that looks like
	`Watchdog has expired.', and will detach from the target.

	* remote-mips.c (mips_open):  Setup initial frame from target.
	Print it out so that user is told where the program is stopped
	when they attach.

	* remote-nrom.c:  Loads of cleanups.  Use serial code to open
	network connections.  Use expect() to wait for response to
	download command.

	* ser-tcp.c (tcp_open):  Retry connection if we get ECONNREFUSED.

	* serial.c serial.h (serial_open serial_fdopen serial_close):
	Allow users to open the same device multiple times.  They all get
	to share the same serial_t.  This is about the only way to have
	multiple active targets use the same device (for download and
	debug).

	* sparcl-tdep.c:  Keep #include <unistd.h> away from GO32.

	* target.c:  Add `targetdebug' variable.  If this is non-zero,
	then a special target is put at the top of the target stack which
	will cause all calls through the target vector to have their args
	and results printed out.
1995-06-08 22:42:36 +00:00
Stu Grossman
a76ef70a14 * core.c (dis_asm_read_memory), defs.h, gdbtk.c (gdb_disassemble),
top.c :  Get rid of dis_asm_read_memory_hook.  We can now call the
	disassemblers directly and have no need for this hook anymore.
	* defs.h, printcmd.c:  Make print_insn be static.

	* ser-go32.c (dos_comisr):  Make this 8 bit clean.
	* (dos_open dos_close):  Allow multiple opens to the same device.
	Use a ref count to prevent unwanted deallocations.
	* sparcl-tdep.c:  Put #ifdefs around all socket stuff to make GO32
	happy.
	* (sparclite_ops):  Switch to download_stratum.
	* target.h (enum strata):  Move download_stratum before
	process_stratum so that executable targets get pushed on top of
	download targets.
1995-02-03 19:35:54 +00:00
Stu Grossman
0e887539b0 * sparcl-tdep.c: Add `sparclite' target for doing serial and udp
downloads to SPARClite demo boards.
1995-01-31 01:38:44 +00:00
Stu Grossman
c746aa850b * sparcl-tdep.c: Clean up formatting and indentation. 1995-01-27 01:34:48 +00:00
Kung Hsu
b955f68067 Added Files:
sparcl-tdep.c sparcl-stub.c
Removed Files:
	sparclite-tdep.c sparclite-stub.c

	* change file name because fisrt 8 chars has to be unique.
1994-06-10 23:26:59 +00:00